73(top 5%)
papers
292(top 10%)
citations
9(top 10%)
h-index
13(top 10%)
g-index
82
all documents
322
doc citations
124
citing journals

Top Articles

#TitleJournalYearCitations
1Experimental and Numerical Investigation of Striker Shape Influence on the Destruction Image in Multilayered Composite after Low Velocity ImpactApplied Sciences (Switzerland)202016
2The Influence of Zinc Waste Filler on the Tribological and Mechanical Properties of Silicone-Based CompositesPolymers202114
3Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D PrintingMaterials202114
4The identification of the vibration control system parameters designed for continuous miner machinesInternational Journal of Non-Linear Mechanics201713
5Low Velocity Impact Response and Tensile Strength of Epoxy Composites with Different Reinforcing MaterialsMaterials202013
6Minimisation of the explosion shock wave load onto the occupants inside the vehicle during trinitrotoluene charge blastInternational Journal of Injury Control and Safety Promotion201612
7Evaluation of the Impact of Organic Fillers on Selected Properties of Organosilicon PolymerPolymers202112
8The Impact of Wood Waste on the Properties of Silicone-Based CompositesPolymers202112
9Numerical Simulation and Experimental Investigation of Cold-Rolled Steel CuttingMaterials201811
10Graded epoxy–hard coal composites: Surface resistivity studyJournal of Composite Materials201610
11Influence of the Structure and Number of Reinforcement Layers on the Stress State in the Shells of Tanks and Pressure PipesMechanics of Composite Materials201710
12Multiobjective Optimization of Composite Wind Turbine BladeMaterials202210
13Mechatronic treadmill for gait reeducation with control algorithm of treadmill speed adaptationProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science20199
14Influence of the Halloysite Nanotube (HNT) Addition on Selected Mechanical and Biological Properties of Thermoplastic PolyurethaneMaterials20218
15Numerical Studies on the Influence of a Reinforcing Material on the Energy Absorption in a Multilayered Composite during ImpactsMechanics of Composite Materials20218
16Determination of Mechanical and Tribological Properties of Silicone-Based Composites Filled with Manganese WasteMaterials20218
17Computational optimization and implementation of control system for mechatronic treadmill with body weight support systemJournal of Theoretical and Applied Mechanics08
18The Mechanical and Tribological Properties of Epoxy-Based Composites Filled with Manganese-Containing WasteMaterials20228
19The use of optimization procedures in tuning vibration dampersEngineering Optimization20027
20Influence of the reinforcement on the destruction image of the composites panels after applying impact loadAIP Conference Proceedings20197
21Modelling and Microstructural Aspects of Ultra-Thin Sheet Metal Bundle CuttingMetals20197
22The influence of halloysite on the physicochemical, mechanical and biological properties of polyurethane-based nanocompositesPolimery20207
23Thermoplastic polyurethanes for mining application processing by 3D printingJournal of Achievements in Materials and Manufacturing Engineering20196
24Modelling of Guillotine Cutting of a Cold-Rolled Steel SheetMaterials20195
25Assessment of SMA Electrical Resistance Change during Cyclic Stretching with Small ElongationSensors20215
26The Application of Microelectromechanical Systems (MEMS) Accelerometers to the Assessment of Blast Threat to Armored Vehicle CrewSensors20225
27Change in Electrical Resistance of SMA (NiTi) Wires during Cyclic StretchingSensors20225
28Graded epoxy-hard coal composites: Analysis of filler particle distribution in the epoxy matrixJournal of Composite Materials20164
29Modeling and Control of an Underactuated System for Dynamic Body Weight SupportApplied Sciences (Switzerland)20214
30Numerical simulations of preliminary state of stress in bundles of metal sheets on the guillotineArchives of Materials Science and Engineering20174
31Mechatronic Device for Locomotor TrainingActa Mechanica Et Automatica20164
32Experimental identification of wheel-surface model parameters: various terrain conditionsScientific Reports20224
33Modeling of Underactuated Ball and Beam System—A Comparative StudyActuators20234
34Fuzzy controller for the treadmill speed adaptation system in mechatronic device for gait reeducationJournal of Intelligent and Fuzzy Systems20203
35Control System Design of an Underactuated Dynamic Body Weight Support System Using Its StabilitySensors20213
36Study of selected physical, chemical and biological properties of selected materials intended for contact with human bodyPolish Journal of Chemical Technology20193
37Reuse of polyester-glass laminate waste in polymer compositesJournal of Achievements in Materials and Manufacturing Engineering20213
38Determination of the Kinematic Excitation Originating from the Irregular Envelope of an Omnidirectional WheelSensors20213
39Intelligent Medical Velostat Pressure Sensor Mat Based on Artificial Neural Network and Arduino Embedded SystemApplied System Innovation20233
40Numerical model of tracked vehicle crossing inland waterMATEC Web of Conferences20192
41Surface treatment of incrementally produced components in FFF (Fused Filament Fabrication) technologyPolimery20202
42Prediction of Strength Properties of Filling Packets in Selected Cooling TowersPolymers20212
43Polyester and Epoxy Resins with Increased Thermal Conductivity and Reduced Surface Resistivity for Applications in Explosion-Proof Enclosures of Electrical DevicesMaterials20222
44Design of an inverted pendulum laboratory stand to teach mechatronicsAIP Conference Proceedings20181
45Comparison of the value of passive safety coefficients for car crash with lighting column made of aluminum or composite material based on numerical simulationMATEC Web of Conferences20191
46Modelling of the Guillotine Cutting Process by Means of a Symmetrical Blade with the Defined GeometryMaterials20201
47REDUCTION OF VIBRATIONS IN ELECTROMECHANICAL DRIVE SYSTEMS WITH VECTOR CONTROLTransport20041
48MODELLING OF ELECTROMECHANICAL DRIVE SYSTEMS WITH THE USE OF MODAL CONDENSATIONTransport20051
49Influence of epoxy resin curing systems and aluminium surface modification on selected properties of adhesive jointsPolish Journal of Chemical Technology20181
50Load condition analysis of pipe flange connection with gasket flat gasket and loose clamping ringsJournal of Achievements in Materials and Manufacturing Engineering20221