Manures, vermicompost, and chemical fertilizer impacts on the yield and volatile compounds of the damask rose (Rosa damascena Mill.) flower petals | | 2022 |
Assessing the carbon footprint of a Colombian University Campus using the UNE-ISO 14064–1 and WRI/WBCSD GHG Protocol Corporate Standard | | |
Disruptive Quantum Safe Technologies | | 2022 |
Improvement of Taste Enhancer Condiment Processing and Safety Using Marinade and bio-preservation of Cassava Fish (Pseudotolithus Sp) | | |
A framework and method for Human-Robot cooperative safe control based on digital twin | Advanced Engineering Informatics | 2022 |
References | | 2023 |
Information Communication technology governance practices in universities: A case study of a university of technology in Durban, South Africa | African Journal of Science, Technology, Innovation and Development | |
Customer Focus | Management for Professionals | 2022 |
Dictates of Quality | Management for Professionals | 2022 |
Quality Management System Audit | Management for Professionals | 2022 |
Commercial Non-invasive Glucose Sensor Devices for Monitoring Diabetes | Springer Series on Bio- and Neurosystems | 2022 |
Fuzzy MAS for Power Prediction Based on the Markov Chains: Modeling and Simulation in a HEV | Studies in Distributed Intelligence | 2022 |
Process Management | Management for Professionals | 2022 |
Quality Management Trends | Management for Professionals | 2022 |
Quality Outlook | Management for Professionals | 2022 |
Economics of Quality | Management for Professionals | 2022 |
Dynamics of Quality | Management for Professionals | 2022 |
Self-similar crack propagation along a viscoelastic interface in a double-cantilever beam test | Mechanics of Time-Dependent Materials | |
Bio-Centred Interaction Design: A New Paradigm for Human-System Interaction | Lecture Notes in Computer Science | 2022 |
Geospatial Metadata | Springer Handbooks | 2022 |
A Comparative Studies of Ten Ergonomics Risk Assessment Methods | Advanced Structured Materials | 2022 |
Transfer of Pt Marker Nanoparticles in a Three-Link Trophic Chain Chlorella Beijer–Daphnia magna Straus–Cyprinus carpio | Nanobiotechnology Reports | 2022 |
Gesture Browser | | 2012 |
The place of ISO 18404:2015 in organisational improvement | TQM Journal | 2022 |
Product Lifecycle Management (PLM) | Decision Engineering | 2022 |
Milk and Milk Product Safety and Quality Assurance for Achieving Better Public Health Outcomes | | 2022 |
Role Of Geospatial Information And Geospatial Information Application Software Systems For Security | NATO Science for Peace and Security Series C: Environmental Security | |
Erfolgsfaktor Standardisierung am Beispiel vom eps e-payment standard | | 2006 |
Future of Automotive Embedded Hardware Trust Anchors (AEHTA) | | |
Evaluation of heat treatment for inactivation of norovirus genogroup II in foods. | Brazilian Journal of Microbiology | 2022 |
Effect of ISO 9001 effectiveness on the performance of certified manufacturing firms in Laguna and Batangas | International Journal of Research Studies in Management | 2022 |
Energy consumption, environmental impact, and implementation of renewable energy resources in global textile industries: an overview towards circularity and sustainability | Materials Circular Economy | 2022 |
Emergency Preparedness and Response—An Evidence-Based Onsite Audit Conducted in Two Hundred Organizations | Lecture Notes in Civil Engineering | 2022 |
Surface dynamics, fractal features, and micromorphology analysis of kefir biofilms. | Microscopy Research and Technique | 2022 |
GisGCN: A Visual Graph-Based Framework to Match Geographical Areas through Time | ISPRS International Journal of Geo-Information | 2022 |
Micro-morphological investigations on wettability of Al-incorporated c-Si thin films using statistical surface roughness parameters | Surface and Interface Analysis | |
Aroma effects of key volatile compounds in Keemun black tea at different grades: HS-SPME-GC-MS, sensory evaluation, and chemometrics | Food Chemistry | 2021 |
Corporate Social Responsibility Reporting: Evolution, Institutionalization, and Current State | | 2021 |
Storage LCA Tool: A Tool for the Investigation of the Environmental Potential of Innovative Storage Systems in Buildings | Sustainable Production, Life Cycle Engineering and Management | 2021 |
Flexible Organizational Process Deployment | | 2006 |
Einführung | | 2007 |
Digitale Lerninhalte und Autorenwerkzeuge | | 2008 |
An Enterprise-Wide Project Quality Management System in Manufacturing Industry | | 2008 |
Knowledge Details in Web Forums: How High or Low above the Ground? | | 2006 |
Normen, Recht und Sicherheit | | 2008 |
Individual Learning and Emotional Characteristics in Web-based Communities of Practice | | |
Exploring the Knowledge Management Landscape | | |
Information and Management System for Renewable Energy Business | Impact of Meat Consumption on Health and Environmental Sustainability | |
The Need for Digital Evidence Standardisation | | |
Forensic Readiness in the Cloud (FRC) | | |
Ontology Based Multi Agent Modelling for Information Security Measurement | Advances in Information Security, Privacy, and Ethics Book Series | |
Replication Strategies for Video On-Demand over Wireless Mesh Networks | | |
Greening the Supply Chain Through CSR: A Model for Assessing Sustainability Using Fuzzy-Based PPP Approach | | 2020 |
Electrical and Electronics Metrology: From Quantum Standard to Applications in Industry and Strategic Sectors | | 2020 |
Evaluation of perceived comfort and functional performance of activewear | | 2020 |
Ensuring Trust in and Acceptance of Digitalization and Automation: Contributions of Human Factors and Ethics | Lecture Notes in Computer Science | 2020 |
Facebook Data Breach: A Systematic Review of Its Consequences on Consumers’ Behaviour Towards Advertising | Asset Analytics | 2020 |
Designer Activism Strategies for Sustainable Leather Product Designs | | 2020 |
Evolution of Space Traffic and Space Traffic Management | | 2020 |
Rosa x damascena Mill. (Rose) | Handbook of Plant Breeding | 2020 |
IMPLEMENTATION OF INTERNATIONAL STANDARDS IN QUALITY MANAGEMENT SYSTEMS AT ENTERPRISES IN THE FIELD OF ENGINEERING SERVICES | State and Regions Series Economics and Business | 2020 |
Quality Management | | 2020 |
WEKA Veri Madenciliği Yazılımının Sürümleri Arasındaki Kalite Değişimlerinin QMOOD ile İncelenmesi | Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi | |
Authentic Quantum Nonces | Quantum Science and Technology | 2020 |
Effect of Planar Anisotropy on the Hole Expansion Ratio of Cold-Rolled DP 590 Steel | Transactions of the Indian Institute of Metals | |
MECHANISM OF ADAPTIVE REENGINEERING BUSINESS PROCESSES OF TRANSPORT ENTERPRISES | | 2020 |
BUSINESS PROCESS MODELLING BY MEANS OF A USE CASE DIAGRAM | Scientific Notes of Taurida National V I Vernadsky University Series Economy and Management | 2020 |
A work in progress - accreditation of forensic DNA laboratories as a part of the ,,European Forensic Science Area 2020 (EFSA 2020)” concept | Forensic Science International: Genetics Supplement Series | 2019 |
Stereometric Analysis of Pt Schottky Contacts on Quaternary n-Al0.08In0.08Ga0.84N Thin Film | | 2020 |
Product Lifecycle Management (PLM) | Decision Engineering | 2020 |
A Characteristic Analysis for Quality Competitiveness Excellent Company | Journal of Society of Korea Industrial and Systems Engineering | 2019 |
Роль нематеріальних активів у формуванні інноваційного розвитку підприємства | Ekonomìka Harčovoï Promislovostì | 2019 |
Issues of standardization of the methods of chemical analysis in metallurgy | Zavodskaya Laboratoriya Diagnostika Materialov | 2019 |
DEFINING REQUIREMENTS TO DEVELOP INFORMATION SECURITY CONCEPT N HYBRID THREATS CONDITIONS. PART 2 | Cybersecurity Education Science Technique | 2019 |
Corruption Indicators and Prevention Policies | Essentials | 2019 |
DEFINING REQUIREMENTS TO DEVELOP INFORMATION SECURITY CONCEPT N HYBRID THREATS CONDITIONS. PART 1 | Cybersecurity Education Science Technique | 2019 |
Information provision function digital medical storage images in the information environment health care institution | Upravlyayushchie Sistemy I Mashiny | 2018 |
The Definition and Generation of Body Measurements (ISO 8559 Series of Standards) | Advances in Intelligent Systems and Computing | 2019 |
Reconstructing Basic DICOM RT Data | | 2018 |
Nutritive value of sun-dried common reed (Phragmites australis) leaves and its effect on performance and carcass characteristics of the growing rabbit | World Rabbit Science | 2018 |
Conceptual Modeling in Health Information Technology | Advances in Healthcare Information Systems and Administration Book Series | 2018 |
Designing Pervasive Virtual Worlds | | 2018 |
Pattern Libraries Guiding the Model-Based Reuse of Automotive Solutions | Lecture Notes in Computer Science | 2018 |
Bulk absorption properties of LBO crystals | | 2017 |
Success Factors For Construction Projects | Tasarim + Kuram | |
The Usage of UTAUT Model for Digital Audio Workstation User Experience Evaluation | Advances in Intelligent Systems and Computing | 2018 |
Drug Delivery Systems | | 2017 |
Quality Management Standard for Learning Service Providers – Critical Analysis | | 2017 |
Biometrics in Cloud Computing | | 2017 |
Assessing the Positional Planimetric Accuracy of DBpedia Georeferenced Resources | Lecture Notes in Computer Science | 2017 |
Integrierte Managementsysteme | | 2017 |
Control Systems in Semi and Fully Automated Cars | Advances in Intelligent Systems and Computing | 2017 |
Seven Rules for Creating a Successful Global IT Service Organization | | 2017 |
Einordnung und Übersicht einschlägiger Normen, Konzepte und Verfahren im Gesundheitswesen | | 2017 |
Universal Design Approaches Among Norwegian Experts | Lecture Notes in Computer Science | 2017 |
IT Investment Consistency and Other Factors Influencing the Success of IT Performance | Advances in Business Information Systems and Analytics Book Series | 2017 |
Analysis of Combustion Expansion and Heat Release Rate During Combustion of Mattress Installed at Different Heights | | 2017 |
Application of Analysis and Risks Assessment Methods for Quality Activities Assurance at the University | Nauka Ta Innovacii | 2016 |
An integrated approach to library holdings: GOST R 7.0.93-2015 «Library fund. Forming technology» | Bibliosfera | 2016 |
TQM: An Overview and the Role of Management | | |
The Introduction and a Framework for TQM | | |
Internet of Things and Crowdsourcing – Towards a Multiple Integrating Model Based on the IoT Lab European Research Project | Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering | 2016 |
Medical Device Manufacturing: Environment, Engineering Control and Monitoring | | 2016 |
Digital Cinema Projection | | 2016 |
Case Study on Corporate Social Action in Goa’s Iron Ore Mining Industry | | 2016 |
Nanostructured Materials: Metrology | | 2016 |
Infection Control in the Laboratory | | |
RobotFusion: Grasping with a Robotic Manipulator via Multi-view Reconstruction | Lecture Notes in Computer Science | 2016 |
References | | 2016 |
Method for Characterization of Material Loss from Modular Head-Stem Taper Surfaces of Hip Replacement Devices | | 2015 |
Evidence-Based Trustworthiness of Internet-Based Services Through Controlled Software Development | Communications in Computer and Information Science | 2015 |
Biometrics in Cloud Computing | Advances in Information Security, Privacy, and Ethics Book Series | 2015 |
Impact of Changes in Quality of Deliveries on the Vulnerability of Supply Chains | IFIP Advances in Information and Communication Technology | 2015 |
A Methodology for the Valuation of Quality Management System in a Fuzzy Environment | Advances in Intelligent Systems and Computing | 2015 |
Digital Cinema Projection | | 2015 |
EvaBio a New Modular Platform to Evaluate Biometric System | Communications in Computer and Information Science | 2015 |
Designing Pervasive Virtual Worlds | Advances in Media, Entertainment and the Arts | 2015 |
Standardisation in Manufacturing Service Engineering | | |
Security Risk Assessment Challenges in Port Information Technology Systems | Communications in Computer and Information Science | 2014 |
Best Practices for Current Learning Repositories: The Case of Agrega | Communications in Computer and Information Science | 2014 |
The UCS-Model of Corporate Sustainability | Lecture Notes in Computer Science | 2014 |
Conclusion | | 2014 |
Evolution of Non-Technical Standards: The Case of Fair Trade | | 2014 |
Mission Critical Embedded System Development Process | Advances in Systems Analysis, Software Engineering, and High Performance Computing Book Series | 2014 |
Power and Thermal Effects and Management | | 2014 |
Mapping the Mechanical Properties of Alloyed Magnesium (AZ 61) | Conference Proceedings of the Society for Experimental Mechanics | 2014 |
References | | |
Applications | | |
An IT Perspective on Standards, Service Architectures and Platforms | Lecture Notes in Computer Science | 2013 |
Benefits of Environmental Management Systems in the Czech Republic | IFIP Advances in Information and Communication Technology | 2013 |
Tool Support for the Quality Assessment of MDWE Methodologies | | 2013 |
Internet-Enabled Calibration | | 2013 |
Component-Based Development: A Unified Model of Reusability Metrics | Advances in Intelligent Systems and Computing | 2013 |
Enhancing Access to Standardized Clinical Application for Mobile Interfaces | Lecture Notes in Computer Science | 2013 |
New Product Development | | 2013 |
Information Security Specialist Training on the Basis of ISO/IEC 27002 | IFIP Advances in Information and Communication Technology | 2013 |
Background to the Development of a Curriculum for the History of “Cyber” and “Communications” Security | IFIP Advances in Information and Communication Technology | 2013 |
Desynchronization and Traceability Attacks on RIPTA-DA Protocol | Lecture Notes in Computer Science | 2013 |
On Using Instruction-Set Extensions for Minimizing the Hardware-Implementation Costs of Symmetric-Key Algorithms on a Low-Resource Microcontroller | Lecture Notes in Computer Science | 2013 |
Interoperability of Medical Devices and Information Systems | | 2013 |
Smart Cards to Enhance Security and Privacy in Biometrics | | 2013 |
Brazil | | 2013 |
Belgium: ISO 9001:2000 Certification as a Base for Total Quality Management in ART | | 2013 |
Quality Management Systems | | 2013 |
References | | |
Towards a Framework for Simulation Based Design, Validation and Performance Analysis of Electronic Control Systems | Lecture Notes in Computer Science | 2012 |
Identification of Patterns for the Formation of Software Development Projects Teams | | 2012 |
A Collaborative System Offering Security Management Services for SMEs/mEs | Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering | 2012 |
Simulation Approaches to Intelligent Vehicles | | 2012 |
Managing Incidents | Springer Series in Reliability Engineering | 2012 |