1(top 16%)
Impact Factor
1(top 16%)
extended IF
49(top 8%)
H-Index
858
authors
4.9K
papers
22.4K
citations
2.1K
citing journals
8.4K
citing authors

Most Cited Articles of Journal of Testing and Evaluation

TitleYearCitations
A Damage Function and Associated Failure Equations for Predicting Hold Time and Frequency Effects in Elevated Temperature, Low Cycle Fatigue1976243
A Simple Method for Studying Slow Crack Growth1973238
Theory and Application of a Micro-Scale Abrasive Wear Test1997181
Multiaxial Fatigue: A Survey of the State of the Art1981120
The Concept of Filament Strength and the Weibull Modulus1989115
Specimen Size Requirements for Fracture Toughness Testing in the Transition Region1991113
Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis1987112
Waste Glass as Coarse Aggregate for Concrete1974108
Variability in Fatigue Crack Growth Rate Testing1975108
Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's Formula1981103
J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens1993100
Impact Three-Point Bend Testing for Notched and Precracked Specimens197899
Heat Transfer in Fibrous Materials197386
Flexural and Shear Moduli of Full-Section Fiber Reinforced Plastic (FRP) Pultruded Beams198986
Generalized Application of Neuber's Rule198086
The Influence of Binder Rheology on the Cracking of Asphalt Mixes in Airport and Highway Projects201483
Experimental Study of Static and Dynamic Friction Between Sand and Typical Constuction Materials197382
Evaluation of the J Integral for the Compact Specimen197979
Computer-Controlled Decreasing Stress Intensity Technique for Low Rate Fatigue Crack Growth Testing197879
Fracture Toughness by Small Punch Testing199577
Development of a Machine for Closely Controlled Rolling Contact Fatigue and Wear Testing200077
Normalization Method for Developing J-R Curves with the LMN Function199173
Deconvolution, Derivation, and Smoothing of Spectra Using Fourier Transforms198469
Development of Small Punch Tests for Creep Property Measurement of Tungsten-Alloyed 9%Cr Ferritic Steels200069
A Simple and Sensitive Method of Monitoring Crack and Load in Compact Fracture Mechanics Specimens Using Strain Gages197968