| 1 | Tailor-made polymer tracers reveal the role of clay minerals on colloidal transport in carbonate media | 9.9 | 4 | Citations (PDF) |
| 2 | Glyoxylic‐Acetal‐Based Gel‐Polymer Electrolytes for Lithium‐Ion Batteries | 4.3 | 6 | Citations (PDF) |
| 3 | Heat generation from swirl-stabilized aluminum-air flames | 7.4 | 4 | Citations (PDF) |
| 4 | Filling the gaps: Introducing plasticizers into π-conjugated OPE-NH2 Langmuir layers for defect-free anisotropic interfaces and membranes towards unidirectional mass, charge, or energy transfer | 9.9 | 4 | Citations (PDF) |
| 5 | Cyclooctyne End‐Functionalized Poly(morpholine‐2,5‐dione)s | 4.1 | 1 | Citations (PDF) |
| 6 | Dual orthogonal metal-complexes and their utilization for the versatile fabrication of smart interpenetrating polymer networks | 3.9 | 2 | Citations (PDF) |
| 7 | 3D‐Printable Polymer Filters for the Selective Complexation of Silver Ions | 2.7 | 1 | Citations (PDF) |
| 8 | Deciphering Polymer Interactions in Bioconjugates with Different Architectures by Structural Analysis via Time‐Resolved Limited Proteolysis Mass Spectrometry | 14.4 | 1 | Citations (PDF) |
| 9 | Demonstration of the co-generation of heat and hydrogen by high-temperature oxidation of aluminum in steam | 9.0 | 6 | Citations (PDF) |
| 10 | Self‐Healing Behavior of Metallopolymers in Complex3D‐Structures Obtained by DLP‐Based 3D‐Printing | 3.4 | 1 | Citations (PDF) |
| 11 | Automated Investigation of Metal‐Ligand Interactions by a Newly Established Robotic Workflow for Titrations | 2.6 | 2 | Citations (PDF) |
| 12 | Photoresponsive cryogels based on poly(2-oxazoline)s | 5.9 | 5 | Citations (PDF) |
| 13 | Amphiphilic block copolymer conjugated with cell-penetrating-peptides derived from Influenza A H1N1 virus as a biocompatible scaffold for enhanced cell-uptake | 5.9 | 2 | Citations (PDF) |
| 14 | Tailoring cationic poly(2-oxazoline)s: Minimizing toxicity and immunogenic response for biological applications | 3.7 | 2 | Citations (PDF) |
| 15 | Stabilizing Perovskite Solar Cells by Methyltriphenylphosphonium Iodide Studied with Maximum Power Point Tracking | 2.1 | 1 | Citations (PDF) |
| 16 | Prospective life cycle assessment of organic redox flow batteries 2025, 1, 468-481 | | 4 | Citations (PDF) |
| 17 | Poly(2‐ethyl‐2‐oxazoline) (POx) as Poly(ethylene glycol) (PEG)‐Lipid Substitute for Lipid Nanoparticle Formulations | 11.5 | 26 | Citations (PDF) |
| 18 | Pyridinium-Benzoxazole-Based Anode Material for Sustainable All-Organic Polymer-Based Batteries | 5.4 | 6 | Citations (PDF) |
| 19 | Photopolymerized gel polymer electrolytes with cyclic carbonate side chains for Li-organic batteries at room temperature | 4.4 | 1 | Citations (PDF) |
| 20 | Pyrazine‐Functionalized Ru(II)‐Complexes as Visible‐Light Activated Photobases | 3.4 | 2 | Citations (PDF) |
| 21 | Adjustment of physical properties and pH-responsive behavior of cryogels based on two- and three-armed poly(2-oxazoline) cross-linkers with functional side chains | 5.9 | 2 | Citations (PDF) |
| 22 | bis(2-Phenylpyridinato)-[4,4′-bis(iodoethynyl)-2,2′-bipyridine]-iridium(III) Hexafluorophosphate | 0.6 | 0 | Citations (PDF) |
| 23 | Direct DLP-based 3D-printing of metallopolymers featuring shape-memory abilities | 6.8 | 2 | Citations (PDF) |
| 24 | A Missing Member of the Anderson–Evans Family: Synthesis and Characterization of the Trimethylolmethane-Capped {MnMo6O24} Cluster | 2.7 | 1 | Citations (PDF) |
| 25 | Effect of Ultraviolet Light on the Shear Bond Strength of Commercial Dental Adhesives | 2.9 | 0 | Citations (PDF) |
| 26 | Enhancing the performance and stability of perovskite solar cells using liquid crystal additive | 2.2 | 0 | Citations (PDF) |
| 27 | All‐Organic Battery Based on Deep Eutectic Solvent and Redox‐Active Polymers** | 6.2 | 11 | Citations (PDF) |
| 28 | How introduction of hydrolyzable moieties in POx influences particle formation – a library approach based on block copolymers comprising polyesters | 3.7 | 3 | Citations (PDF) |
| 29 | Photobasic transition-metal complexes | 23.1 | 8 | Citations (PDF) |
| 30 | Optimization of Mixed Micelles Based on Oppositely Charged Block Copolymers by Machine Learning for Application in Gene Delivery | 11.5 | 19 | Citations (PDF) |
| 31 | Application of Digital Methods in Polymer Science and Engineering | 17.0 | 23 | Citations (PDF) |
| 32 | Beyond lithium-ion batteries: Recent developments in polymer-based electrolytes for alternative metal-ion-batteries | 18.1 | 33 | Citations (PDF) |
| 33 | Development of Novel Redox‐Active Organic Materials Based on Benzimidazole, Benzoxazole, and Benzothiazole: A Combined Theoretical and Experimental Screening Approach | 3.4 | 8 | Citations (PDF) |
| 34 | The chemistry of the s- and p-block elements with 2,2′:6′,2′′-terpyridine ligands | 6.3 | 18 | Citations (PDF) |
| 35 | Beyond steady-state conditions: Chronoamperometric state-of-charge and state-of-health measurements in flow battery electrolytes | 7.6 | 5 | Citations (PDF) |
| 36 | Nanomedicine in chemistry education: Targeted drug delivery with polymer nanoparticles | 0.3 | 3 | Citations (PDF) |
| 37 | Aging of quinoxaline-based polymer solar cells under UV-free white light | 3.9 | 3 | Citations (PDF) |
| 38 | PEtOxylated polyesteramide nanoparticles for the delivery of anti-inflammatory drugs | 3.7 | 7 | Citations (PDF) |
| 39 | Luminescent Platinum(II) Complexes with a Tridentate Caffeine‐Based NHC‐Pincer Ligand: Synthesis, Electrochemistry and Photophysics | 1.8 | 6 | Citations (PDF) |
| 40 | Dual‐Use Self‐Assembled Monolayer Controlling Charge Carrier Extraction in Organic Solar Cells | 9.0 | 10 | Citations (PDF) |
| 41 | Development of a multi‐step screening procedure for redox active molecules in organic radical polymer anodes and as redox flow anolytes | 4.8 | 7 | Citations (PDF) |
| 42 | Evaluation of in situ thermal stability assessment for flow batteries and deeper investigation of the ferrocene co-polymer | 9.3 | 6 | Citations (PDF) |
| 43 | Determination of
ω
-end functionalities in tailored poly(2-alkyl-2-oxazoline)s by liquid chromatography and mass spectrometry | 2.4 | 4 | Citations (PDF) |
| 44 | Exploiting Orthogonal C–C Cross-Coupling Reactions for Chemistry-on-the-Complex: Modular Assembly of 2,6-Di(quinolin-8-yl)pyridine Ruthenium(II) Photosensitizer Triads | 4.6 | 2 | Citations (PDF) |
| 45 | The Effect of Stereocomplexation and Crystallinity on the Degradation of Polylactide Nanoparticles | 4.0 | 5 | Citations (PDF) |
| 46 | Bioorthogonal “Click” Cycloadditions: A Toolkit for Modulating Polymers and Nanostructures in Living Systems | 2.1 | 9 | Citations (PDF) |
| 47 | Amino-Acid-Derived Anionic Polyacrylamides with Tailored Hydrophobicity–Physicochemical Properties and Cellular Interactions | 5.9 | 13 | Citations (PDF) |
| 48 | Cryogels Based on Poly(2-oxazoline)s through Development of Bi- and Trifunctional Cross-Linkers Incorporating End Groups with Adjustable Stability | 5.0 | 6 | Citations (PDF) |
| 49 | An Iridium Complex as Bidentate Halogen Bond‐Based Anion Receptor Featuring an IncreasedOptical Response | 2.6 | 1 | Citations (PDF) |
| 50 | Low-Pressure Preparative Size-Exclusion Chromatography: from Narrow Disperse Polymer to Monodisperse Oligomer Batches | 5.0 | 6 | Citations (PDF) |
| 51 | Protocol for creating representations of molecular structures using a polymer-specific decoder | 1.1 | 0 | Citations (PDF) |
| 52 | Biophysical investigation of liposome systems decorated with bioconjugated copolymers in the presence of amantadine | 5.5 | 3 | Citations (PDF) |
| 53 | Investigation of the cooperative-effects of Lewis- and Brønstedt acids in homogeneously catalyzed OME fuel synthesis by inline-NMR monitoring | 4.4 | 2 | Citations (PDF) |
| 54 | Investigation of selective metal-complexation in terpyridine and phenanthroline based polymeric systems | 4.1 | 1 | Citations (PDF) |
| 55 | Advancements and Challenges in the Synthesis of Oxymethylene Ethers (OMEs) as Sustainable Transportation Fuels | 3.4 | 4 | Citations (PDF) |
| 56 | Surface functionalized cryogels – characterization methods, recent progress in preparation and application | 10.2 | 12 | Citations (PDF) |
| 57 | Flexible Hydrogel Electrolytes for Organic Batteries with High Cyclability | 3.1 | 9 | Citations (PDF) |
| 58 | Automated screening of precipitation polymerizations and evaluation using image recognition for divinylbenzene and methacrylic acid | 2.7 | 0 | Citations (PDF) |
| 59 | Recent developments in synthetic approaches for macromolecular prodrugs | 25.1 | 7 | Citations (PDF) |
| 60 | Polyoxazolines with Cholesterol Lipid Anchor for Fast Intracellular Delivery | 4.0 | 4 | Citations (PDF) |
| 61 | Unveiling the power of liquid chromatography in examining a library of degradable poly(2-oxazoline)s in nanomedicine applications | 5.5 | 2 | Citations (PDF) |
| 62 | Hyperbranched TEMPO-based polymers as catholytes for redox flow battery applications | 4.4 | 3 | Citations (PDF) |
| 63 | POxylated stereocomplexes from PEtOx-b-PLA diblock copolymers | 5.9 | 2 | Citations (PDF) |
| 64 | Correlating the 3D Morphology of Polymer-Based Battery Electrodes with Effective Transport Properties | 8.0 | 3 | Citations (PDF) |
| 65 | From Molecular to Polymeric Donors: Prolonged Charge Separation in Modular Photoredox-Active Ru(II) Polypyridyl-Type Triads | 4.6 | 2 | Citations (PDF) |
| 66 | Percolation Investigation of Polymer-Based Battery Electrodes and Its Influence on Capacity Utilization | 0.0 | 0 | Citations (PDF) |
| 67 | Chloride Ion‐Containing Polymeric Ionic Liquids for Application as Electrolytes in Solid‐State Batteries | 2.4 | 7 | Citations (PDF) |
| 68 | All‐Aqueous, Surfactant‐Free, and pH‐Driven Nanoformulation Methods of Dual‐Responsive Polymer Nanoparticles and their Potential use as Nanocarriers of pH‐Sensitive Drugs | 4.0 | 3 | Citations (PDF) |
| 69 | Targeted Drug Delivery: Synthesis of Smart Nanocarriers for School Chemistry Education | 2.8 | 14 | Citations (PDF) |
| 70 | Tailored Charge Transfer Kinetics in Precursors for Organic Radical Batteries: A Joint Synthetic‐Theoretical Approach** | 6.2 | 9 | Citations (PDF) |
| 71 | Demonstrating the Use of a Fungal Synthesized Quinone in a Redox Flow Battery | 4.3 | 11 | Citations (PDF) |
| 72 | Anion exchange membranes with high power density and energy efficiency for aqueous organic redox flow batteries | 5.3 | 10 | Citations (PDF) |
| 73 | From static to active photoluminescence tuning: functional spacer materials for plasmon–fluorophore interaction | 5.1 | 9 | Citations (PDF) |
| 74 | Fluidized or not fluidized? Biophysical characterization of biohybrid lipid/protein/polymer liposomes and their interaction with tetracaine | 2.0 | 12 | Citations (PDF) |
| 75 | High-capacity semi-organic polymer batteries: From monomer to battery in an all-aqueous process | 7.9 | 12 | Citations (PDF) |
| 76 | End-functionalized diblock copolymers by mix and match of poly(2-oxazoline) and polyester building blocks | 5.9 | 10 | Citations (PDF) |
| 77 | Coordination of Noble Metals in Poly(vinyl mercaptoethanol) Particles Prepared by Precipitation/Emulsion Polymerization | 2.4 | 2 | Citations (PDF) |
| 78 | State and Prospects of Unbalanced, Compositionally Symmetric Flow Battery Cycling and Steady-State Amperometry Techniques for Electrolyte Stability Assessment: The Case of Methyl Viologen | 5.4 | 11 | Citations (PDF) |
| 79 | Organocatalyzed Ring‐Opening Polymerization of (S)‐3‐Benzylmorpholine‐2,5‐Dione | 4.1 | 7 | Citations (PDF) |
| 80 | Compatible Solution‐Processed Interface Materials for Improved Efficiency of Polymer Solar Cells | 4.0 | 7 | Citations (PDF) |
| 81 | One-Pot Synthesis of Miktoarm Star Polymers Based on Orthogonal Metal–Ligand Interactions | 4.6 | 9 | Citations (PDF) |
| 82 | Additive-Free Organic Radical Batteries Prepared through Electrochemical Polymerization of TEMPO-Decorated Terthiophene | 3.1 | 8 | Citations (PDF) |
| 83 | Hollow porous silicon nanospheres with 3D SiC@C coating as high-performance anodes | 6.9 | 19 | Citations (PDF) |
| 84 | Thermo-responsive polymer catalysts for polyester recycling processes: switching from homogeneous catalysis to heterogeneous separations | 3.9 | 9 | Citations (PDF) |
| 85 | Nanodiamonds as Charge Extraction Layer in Organic Solar Cells: The Impact of the Nanodiamond Surface Chemistry | 4.6 | 11 | Citations (PDF) |
| 86 | Chameleon Multienvironment Nanoreactors | 8.0 | 1 | Citations (PDF) |
| 87 | Diglyme-based gel polymer electrolytes for K-ion capacitors | 18.1 | 16 | Citations (PDF) |
| 88 | Dimethylsulfoniopropionate decorated cryogels as synthetic spatially structured habitats of marine bacterial communities | 10.2 | 5 | Citations (PDF) |
| 89 | Oxymethylene Ether (OME) Fuel Catalyst Screening Using In Situ NMR Spectroscopy | 3.4 | 6 | Citations (PDF) |
| 90 | Organic Redox Targeting Flow Battery Utilizing a Hydrophilic Polymer and Its In‐Operando Characterization via State‐of‐Charge Monitoring of The Redox Mediator | 6.2 | 15 | Citations (PDF) |
| 91 | Catalysis of a Bis-Caffeine Palladium(II) NHC-Pincer Complex | 2.7 | 9 | Citations (PDF) |
| 92 | Near-frictionless ion transport within triazine framework membranes | 38.0 | 323 | Citations (PDF) |
| 93 | Influence of structural modifications on the alkali ion storage properties of carbon black in hybrid ion capacitor negative electrodes | 3.9 | 3 | Citations (PDF) |
| 94 | Evaluation of reproducible cryogel preparation based on automated image analysis using deep learning | 4.2 | 11 | Citations (PDF) |
| 95 | Fingerprint applicable for machine learning tested on LCST behavior of polymers | 4.9 | 8 | Citations (PDF) |
| 96 | Modification of Branched Poly(ethylene imine) with d‐Fructose for Selective Delivery of siRNA into Human Breast Cancer Cells | 4.0 | 3 | Citations (PDF) |
| 97 | Towards Incorporation in Larger Architectures: A Polymeric Halogen Bond‐Based Iridium Sensor | 2.4 | 0 | Citations (PDF) |
| 98 | Electronic and Photochemical Passivation by a Classic Sunscreen Material Leading to Reduced Voc Losses and Enhanced Stability in Organic Solar Cells | 8.0 | 9 | Citations (PDF) |
| 99 | Self-Assembly of Core–Shell Hybrid Nanoparticles by Directional Crystallization of Grafted Polymers | 15.3 | 10 | Citations (PDF) |
| 100 | Salivary Pellicle Formed on Dental Composites Evaluated by Mass Spectrometry—An In Situ Study | 4.2 | 7 | Citations (PDF) |
| 101 | Hydrophilic cryogels as potential 3D cell culture materials: Synthesis and characterization of 2‐(methacrylamido) glucopyranose‐based polymer scaffolds | 3.9 | 5 | Citations (PDF) |
| 102 | Best practice for sampling in automated parallel synthesizers | 4.5 | 4 | Citations (PDF) |
| 103 | Percolation investigation of organic radical battery electrodes and its crucial impact on capacity utilization | 12.0 | 5 | Citations (PDF) |
| 104 | Systematic copolymer screening for foaming experiments supported by computational methods | 9.3 | 7 | Citations (PDF) |
| 105 | Amphiphilic Poly(2-oxazoline)s with Glycine-Containing Hydrophobic Blocks Tailored for Panobinostat- and Imatinib-Loaded Micelles | 5.1 | 6 | Citations (PDF) |
| 106 | Bile Is a Selective Elevator for Mucosal Mechanics and Transport | 4.2 | 5 | Citations (PDF) |
| 107 | Low‐cost inkjet printing of thin‐film mullite structures | 2.3 | 5 | Citations (PDF) |
| 108 | Controlling Metal Halide Perovskite Crystal Growth via Microcontact Printed Hydrophobic‐Hydrophilic Templates | 1.7 | 4 | Citations (PDF) |
| 109 | Redox-active polymers: The magic key towards energy storage – a polymer design guideline progress in polymer science | 25.1 | 100 | Citations (PDF) |
| 110 | Chitosan-based inks for 3D printing and bioprinting | 9.1 | 167 | Citations (PDF) |
| 111 | Miniemulsion polymerization at low temperature: A strategy for one-pot encapsulation of hydrophobic anti-inflammatory drugs into polyester-containing nanoparticles | 9.9 | 6 | Citations (PDF) |
| 112 | A low-cost amperometric sensor for the combined state-of-charge, capacity, and state-of-health monitoring of redox flow battery electrolytes | 1.5 | 4 | Citations (PDF) |
| 113 | All-Organic Redox Targeting with a Single Redox Moiety: Combining Organic Radical Batteries and Organic Redox Flow Batteries | 8.0 | 43 | Citations (PDF) |
| 114 | Fully Automated Multi-Step Synthesis of Block Copolymers | 4.5 | 13 | Citations (PDF) |
| 115 | Drug delivery of 6-bromoindirubin-3’-glycerol-oxime ether employing poly(d,l-lactide-co-glycolide)-based nanoencapsulation techniques with sustainable solvents | 11.4 | 17 | Citations (PDF) |
| 116 | Improvement of High-Throughput Experimentation Using Synthesis Robots by the Implementation of Tailor-Made Sensors | 4.5 | 9 | Citations (PDF) |
| 117 | A photosensitizer–polyoxometalate dyad that enables the decoupling of light and dark reactions for delayed on-demand solar hydrogen production | 18.7 | 135 | Citations (PDF) |
| 118 | Blatter radical as a polymeric active material in organic batteries | 7.9 | 25 | Citations (PDF) |
| 119 | Stability of TMA-TEMPO-based aqueous electrolytes for redox-flow batteries | 7.9 | 49 | Citations (PDF) |
| 120 | Structural alterations on the TEMPO scaffold and their impact on the performance as active materials for redox flow batteries | 4.6 | 23 | Citations (PDF) |
| 121 | Triplet–Triplet Annihilation Upconversion by Polymeric Sensitizers | 3.1 | 14 | Citations (PDF) |
| 122 | Regaining Potential: Studies Concerning 2-Ferrocenylethyl Methacrylate, Its Polymers, and Application in Redox Flow Batteries | 5.0 | 9 | Citations (PDF) |
| 123 | Shear-Thinning and Rapidly Recovering Hydrogels of Polymeric Nanofibers Formed by Supramolecular Self-Assembly | 6.7 | 18 | Citations (PDF) |
| 124 | From Light to Structure: Photo Initiators for Radical Two‐Photon Polymerization | 3.4 | 59 | Citations (PDF) |
| 125 | Metallo-Supramolecular Complexation Behavior of Terpyridine- and Ferrocene-Based Polymers in Solution—A Molecular Hydrodynamics Perspective | 4.5 | 4 | Citations (PDF) |
| 126 | Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications | 24.5 | 249 | Citations (PDF) |
| 127 | A Viologen Polymer and a Compact Ferrocene: Comparison of Solution Viscosities and Their Performance in a Redox Flow Battery with a Size Exclusion Membrane | 2.4 | 10 | Citations (PDF) |
| 128 | Chemo-Enzymatic PEGylation/POxylation of Murine Interleukin-4 | 3.8 | 15 | Citations (PDF) |
| 129 | Two‐Dimensional Photosensitizer Nanosheets via Low‐Energy Electron Beam Induced Cross‐Linking of Self‐Assembled RuII Polypyridine Monolayers | 14.4 | 8 | Citations (PDF) |
| 130 | Recent advances in degradable synthetic polymers for biomedical applications ‐ Beyond polyesters | 25.1 | 112 | Citations (PDF) |
| 131 | Hydrodynamic Characteristics and Conformational Parameters of Ferrocene-Terpyridine-Based Polymers | 4.5 | 4 | Citations (PDF) |
| 132 | State of Charge and State of Health Assessment of Viologens in Aqueous‐Organic Redox‐Flow Electrolytes Using In Situ IR Spectroscopy and Multivariate Curve Resolution | 12.6 | 17 | Citations (PDF) |
| 133 | Exploiting α-/ω-Reactivities during Polymerization for Controlled Heterotelechelic Poly(carbazole)s | 5.0 | 8 | Citations (PDF) |
| 134 | Synthesis and Characterization of Metallopolymer Networks Featuring Triple Shape-Memory Ability Based on Different Reversible Metal Complexes | 4.5 | 5 | Citations (PDF) |
| 135 | Comparing Microwave and Classical Synthesis of Oxymethylene Dimethyl Ethers | 2.4 | 5 | Citations (PDF) |
| 136 | Response to Christopher P. Muzzillo's Comments on “Introduction of a Novel Figure of Merit for the Assessment of Transparent Conductive Electrodes in Photovoltaics: Exact and Approximate Form” | 22.5 | 0 | Citations (PDF) |
| 137 | Triazole-Functionalized Mesoporous Materials Based on Poly(styrene-block-lactic acid): A Morphology Study of Thin Films | 4.5 | 5 | Citations (PDF) |
| 138 | Hydrophilic Crosslinked TEMPO‐Methacrylate Copolymers – a Straight Forward Approach towards Aqueous Semi‐Organic Batteries | 6.2 | 6 | Citations (PDF) |
| 139 | Oxidation of N,N,N,2,2,6,6‐Heptamethyl‐piperidine‐4‐ammonium Chloride to Water‐Soluble N‐Oxyl Radicals: A Comparative Study | 2.3 | 2 | Citations (PDF) |
| 140 | Frontispiz: Two‐Dimensional Photosensitizer Nanosheets via Low‐Energy Electron Beam Induced Cross‐Linking of Self‐Assembled RuII Polypyridine Monolayers | 1.4 | 0 | Citations (PDF) |
| 141 | Noble Metal Complexes of a Bis-Caffeine Containing NHC Ligand | 4.2 | 4 | Citations (PDF) |
| 142 | An effective method of reconnoitering current–voltage (IV) characteristics of organic solar cells | 2.0 | 4 | Citations (PDF) |
| 143 | Polymer selection impacts the pharmaceutical profile of site-specifically conjugated Interferon-α2a | 11.0 | 12 | Citations (PDF) |
| 144 | 3D microstructure characterization of polymer battery electrodes by statistical image analysis based on synchrotron X-ray tomography | 7.9 | 9 | Citations (PDF) |
| 145 | Inkjet-printed microband electrodes for a cost-efficient state-of-charge monitoring in redox flow batteries | 7.6 | 6 | Citations (PDF) |
| 146 | Acid–base responsive photoluminescence switching of CdSe/ZnS quantum dots coupled to plasmonic gold film using nanometer-thick poly[(2-diethylamino)ethyl methacrylate] layer | 5.0 | 4 | Citations (PDF) |
| 147 | PEtOxylated Interferon-α2a Bioconjugates Addressing H1N1 Influenza A Virus Infection | 5.1 | 8 | Citations (PDF) |
| 148 | Single‐step post‐production treatment of lead acetate precursor‐based perovskite using alkylamine salts for reduced grain‐boundary related film defects | 3.4 | 1 | Citations (PDF) |
| 149 | P3HT:PCBM polymer solar cells from a didactic perspective | 1.7 | 21 | Citations (PDF) |
| 150 | Glycerol methacrylate-based copolymers: Reactivity ratios, physicochemical characterization and cytotoxicity | 5.9 | 11 | Citations (PDF) |
| 151 | Exploring the principles of self-healing polymers based on halogen bond interactions | 1.6 | 7 | Citations (PDF) |
| 152 | How varying surface wettability of different PEDOT:PSS formulations and their mixtures affects perovskite crystallization and the efficiency of inverted perovskite solar cells | 4.4 | 35 | Citations (PDF) |
| 153 | Polymers fromS-vinyl monomers: reactivities and properties | 3.9 | 15 | Citations (PDF) |
| 154 | Glucose Scavenging with Pectin Hydrazide: A Step toward Designing Innovative, Functional, All‐Sugar‐Based Polymers | 2.4 | 3 | Citations (PDF) |
| 155 | Flash‐Lamp Processing of Charge Extraction Layers for Polymer Solar Cells | 4.0 | 7 | Citations (PDF) |
| 156 | 3D‐Printable Shape‐Memory Polymers Based on Halogen Bond Interactions | 17.0 | 27 | Citations (PDF) |
| 157 | Thermo-responsive lipophilic NIPAM-based block copolymers as stabilizers for lipid-based cubic nanoparticles | 5.3 | 13 | Citations (PDF) |
| 158 | Application of orthogonal metal–ligand interactions for the synthesis of interpenetrating metallopolymer networks featuring shape-memory and self-healing abilities | 9.3 | 15 | Citations (PDF) |
| 159 | Photophysical Study on the Rigid Pt(II) Complex [Pt(naphen)(Cl)] (Hnaphen = Naphtho[1,2-b][1,10]Phenanthroline and Derivatives | 4.2 | 6 | Citations (PDF) |
| 160 | A user-guide for polymer purification using dialysis | 3.9 | 14 | Citations (PDF) |
| 161 | Automated Parallel Dialysis for Purification of Polymers | 4.5 | 5 | Citations (PDF) |
| 162 | Structural Improvement of the Blatter Radical for High-Current Organic Batteries | 5.4 | 15 | Citations (PDF) |
| 163 | Targeting of phagolysosomes containing conidia of the fungus Aspergillus fumigatus with polymeric particles | 4.0 | 1 | Citations (PDF) |
| 164 | Polymers for Battery Applications—Active Materials, Membranes, and Binders | 22.5 | 140 | Citations (PDF) |
| 165 | DNA Origami Meets Polymers: A Powerful Tool for the Design of Defined Nanostructures | 14.4 | 48 | Citations (PDF) |
| 166 | Emulsion Polymerizations for a Sustainable Preparation of Efficient TEMPO‐based Electrodes | 6.2 | 33 | Citations (PDF) |
| 167 | Well-defined poly(ethylene glycol) polymers as non-conventional reactive tracers of colloidal transport in porous media | 9.9 | 9 | Citations (PDF) |
| 168 | Effect of Hydrophilic Monomer Distribution on Self‐Assembly of a pH‐Responsive Copolymer: Spheres, Worms and Vesicles from a Single Copolymer Composition | 14.4 | 56 | Citations (PDF) |
| 169 | Kinetic investigations on homo- and co-polymerizations of pentafluorophenyl (meth)acrylates | 5.9 | 8 | Citations (PDF) |
| 170 | Understanding the influence of chemical structure and length of hydrophobic blocks on the rheological properties of associative copolymers | 5.9 | 25 | Citations (PDF) |
| 171 | Einfluss der Verteilung hydrophiler Monomere auf die Selbstassemblierung eines pH‐responsiven Copolymers: Kugeln, Würmer und Vesikel aus einer einzigen Copolymerkomposition | 1.4 | 1 | Citations (PDF) |
| 172 | Ferrocene containing redox-responsive poly(2-oxazoline)s | 3.4 | 9 | Citations (PDF) |
| 173 | Kombination von DNA‐Origami und Polymeren: Eine leistungsstarke Methode zum Aufbau definierter Nanostrukturen | 1.4 | 3 | Citations (PDF) |
| 174 | Surface chemical reactions on self-assembled silane based monolayers | 37.7 | 127 | Citations (PDF) |
| 175 | Shape‐Memory Metallopolymers Based on Two Orthogonal Metal–Ligand Interactions | 24.5 | 48 | Citations (PDF) |
| 176 | Revisiting staining of biological samples for electron microscopy: perspectives for recent research | 10.2 | 7 | Citations (PDF) |
| 177 | Block copolymers comprising degradable poly(2-ethyl-2-oxazoline) analoguesviacopper-free click chemistry | 3.9 | 10 | Citations (PDF) |
| 178 | Trust is good, control is better: a review on monitoring and characterization techniques for flow battery electrolytes | 10.2 | 88 | Citations (PDF) |
| 179 | Why Organic Electronic Devices Comprising PEDOT:PSS Electrodes Should be Fabricated on Metal Free Substrates | 4.6 | 30 | Citations (PDF) |
| 180 | Drug-Induced Dynamics of Bile Colloids | 3.6 | 16 | Citations (PDF) |
| 181 | Photocathodes beyond NiO: charge transfer dynamics in a π-conjugated polymer functionalized with Ru photosensitizers | 3.4 | 8 | Citations (PDF) |
| 182 | Adaptation of electrodes and printable gel polymer electrolytes for optimized fully organic batteries | 3.9 | 9 | Citations (PDF) |
| 183 | Photoluminescence Switching of CdSe/ZnS Quantum Dots Toward Sensing Applications Triggered by Thermoresponsive Poly(N-Isopropylacrylamide) Films on Plasmonic Gold Surfaces | 5.3 | 8 | Citations (PDF) |
| 184 | Study of Anion Exchange Membrane Properties Incorporating N-spirocyclic Quaternary Ammonium Cations and Aqueous Organic Redox Flow Battery Performance | 3.2 | 21 | Citations (PDF) |
| 185 | Poly(2‐ethyl‐2‐oxazoline) Featuring a Central Amino Moiety | 4.1 | 8 | Citations (PDF) |
| 186 | Quantification of Triple‐Shape Memory Behavior of Polymers Utilizing Tension and Torsion | 2.4 | 11 | Citations (PDF) |
| 187 | Aging processes in high voltage lithium-ion capacitors containing liquid and gel-polymer electrolytes | 7.9 | 13 | Citations (PDF) |
| 188 | Excitation Energy-Dependent Branching Dynamics Determines Photostability of Iron(II)–Mesoionic Carbene Complexes | 4.6 | 25 | Citations (PDF) |
| 189 | Spatial Conductivity Distribution in Thin PEDOT:PSS Films after Laser Microannealing | 4.6 | 13 | Citations (PDF) |
| 190 | Novel, Stable Catholyte for Aqueous Organic Redox Flow Batteries: Symmetric Cell Study of Hydroquinones with High Accessible Capacity | 4.2 | 23 | Citations (PDF) |
| 191 | Kinetically Controlling the Length of Self-Assembled Polymer Nanofibers Formed by Intermolecular Hydrogen Bonds | 5.0 | 17 | Citations (PDF) |
| 192 | Antifungal properties of poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) and quaternized derivatives | 4.8 | 13 | Citations (PDF) |
| 193 | On the stability of microwave-fabricated SERS substrates – chemical and morphological considerations | 2.4 | 5 | Citations (PDF) |
| 194 | IR Spectroscopy as a Method for Online Electrolyte State Assessment in RFBs | 22.5 | 15 | Citations (PDF) |
| 195 | Introduction of a Novel Figure of Merit for the Assessment of Transparent Conductive Electrodes in Photovoltaics: Exact and Approximate Form | 22.5 | 92 | Citations (PDF) |
| 196 | Simple heteroaryl modifications in the 4,5-diarylisoxazol-3-carboxylic acid scaffold favorably modulates the activity as dual mPGES-1/5-LO inhibitors with in vivo efficacy | 4.1 | 11 | Citations (PDF) |
| 197 | Effect of Crystallinity on the Properties of Polycaprolactone Nanoparticles Containing the Dual FLAP/mPEGS-1 Inhibitor BRP-187 | 4.5 | 21 | Citations (PDF) |
| 198 | Non-fullerene acceptor photostability and its impact on organic solar cell lifetime | 4.9 | 69 | Citations (PDF) |
| 199 | Stealth Effect of Short Polyoxazolines in Graft Copolymers: Minor Changes of Backbone End Group Determine Liver Cell-Type Specificity | 15.3 | 24 | Citations (PDF) |
| 200 | Versatile Applications of Metallopolymers | 25.1 | 43 | Citations (PDF) |
| 201 | New Methods for the Functionalization of Polymer Matrices with Thiomolybdate Clusters Applied for Hydrogen Evolution Reaction Catalysis | 5.5 | 2 | Citations (PDF) |
| 202 | The time-dependency of the healing behavior of laser-scratched polymer films | 5.4 | 3 | Citations (PDF) |
| 203 | A combined experimental and in silico approach to determine the compatibility of poly(ester amide)s and indomethacin in polymer nanoparticles | 5.9 | 14 | Citations (PDF) |
| 204 | Synthesis of functional miktoarm star polymers in an automated parallel synthesizer | 5.9 | 11 | Citations (PDF) |
| 205 | New Diglyme‐based Gel Polymer Electrolytes for Na‐based Energy Storage Devices | 6.2 | 15 | Citations (PDF) |
| 206 | Liquid Chromatography Analysis of Reactive Oxoammonium Cations | 1.2 | 1 | Citations (PDF) |
| 207 | Targeted delivery of a phosphoinositide 3‐kinase γ inhibitor to restore organ function in sepsis | 7.1 | 25 | Citations (PDF) |
| 208 | On the identification and quantification of proton-initiated species in the synthesis of poly(2-alkyl-2-oxazoline)s by high resolution liquid chromatography | 3.7 | 13 | Citations (PDF) |
| 209 | Selective Metal‐Complexation on Polymeric Templates and Their Investigation via Isothermal Titration Calorimetry | 2.4 | 4 | Citations (PDF) |
| 210 | Polymeric Blatter's Radical via CuAAC and ROMP | 2.4 | 14 | Citations (PDF) |
| 211 | Separation of volatile compounds from polymers by physisorption | 5.9 | 6 | Citations (PDF) |
| 212 | Halogen bonding in polymer science: towards new smart materials | 7.1 | 100 | Citations (PDF) |
| 213 | Digital Transformation in Materials Science: A Paradigm Change in Material's Development | 24.5 | 60 | Citations (PDF) |
| 214 | Red-light sensitized hole-conducting polymer for energy conversion | 2.7 | 2 | Citations (PDF) |
| 215 | Dual crosslinked metallopolymers using orthogonal metal complexes as rewritable shape-memory polymers | 9.3 | 20 | Citations (PDF) |
| 216 | Uphill and downhill charge generation from charge transfer to charge separated states in organic solar cells | 5.1 | 21 | Citations (PDF) |
| 217 | Dialysis Diffusion Kinetics in Polymer Purification | 5.0 | 20 | Citations (PDF) |
| 218 | Prediction of Nanoparticle Sizes for Arbitrary Methacrylates Using Artificial Neuronal Networks | 12.6 | 23 | Citations (PDF) |
| 219 | Molecular Insights into Site-Specific Interferon-α2a Bioconjugates Originated from PEG, LPG, and PEtOx | 5.1 | 30 | Citations (PDF) |
| 220 | Improved Hole Extraction Selectivity of Polymer Solar Cells by Combining PEDOT:PSS with WO3 | 3.4 | 12 | Citations (PDF) |
| 221 | The Influence of the Nature of Redox-Active Moieties on the Properties of Redox-Active Ionic Liquids and on Their Use as Electrolyte for Supercapacitors | 2.9 | 10 | Citations (PDF) |
| 222 | Intracellularly Released Cholesterol from Polymer-Based Delivery Systems Alters Cellular Responses to Pneumolysin and Promotes Cell Survival | 3.4 | 4 | Citations (PDF) |
| 223 | Anthraquinone-2,6-disulfamidic acid: an anolyte with low decomposition rates at elevated temperatures | 4.4 | 7 | Citations (PDF) |
| 224 | Photoactive ultrathin molecular nanosheets with reversible lanthanide binding terpyridine centers | 5.0 | 7 | Citations (PDF) |
| 225 | Ethoxy acetalated dextran-based nanocarriers accomplish efficient inhibition of leukotriene formation by a novel FLAP antagonist in human leukocytes and blood | 5.5 | 13 | Citations (PDF) |
| 226 | Solution-Based Self-Assembly and Stability of Ruthenium(II) Tris-bipyridyl Monolayers on Gold | 8.0 | 7 | Citations (PDF) |
| 227 | Printable ionic liquid-based gel polymer electrolytes for solid state all-organic batteries | 18.1 | 46 | Citations (PDF) |
| 228 | Microfabrication of 3D-hydrogels via two-photon polymerization of poly(2-ethyl-2-oxazoline) diacrylates | 5.9 | 33 | Citations (PDF) |
| 229 | Revisiting very disperse macromolecule populations in hydrodynamic and light scattering studies of sodium carboxymethyl celluloses | 12.2 | 15 | Citations (PDF) |
| 230 | Core‐Shell Nanoparticles with a Redox Polymer Core and a Silica Porous Shell as High‐Performance Cathode Material for Lithium‐Ion Batteries | 3.4 | 7 | Citations (PDF) |
| 231 | A polyesteramide library from dicarboxylic acids and 2,2′-bis(2-oxazoline): synthesis, characterization, nanoparticle formulation and molecular dynamics simulations | 3.9 | 13 | Citations (PDF) |
| 232 | Quasi-block copolymer design of quaternized derivatives of poly(2-(dimethylamino)ethyl methacrylate): Investigations on thermo-induced self-assembly | 5.9 | 17 | Citations (PDF) |
| 233 | Collision cross‐section analysis of self‐assembled metallomacrocycle isomers and isobars via ion mobility mass spectrometry | 1.4 | 14 | Citations (PDF) |
| 234 | Polyester Stereocomplexes Beyond PLA: Could Synthetic Opportunities Revolutionize Established Material Blending? | 4.1 | 54 | Citations (PDF) |
| 235 | Inkjet‐Printing of Supercapacitors | 1.7 | 8 | Citations (PDF) |
| 236 | “Hard” Sphere Behavior of “Soft”, Globular-like, Hyperbranched Polyglycerols – Extensive Molecular Hydrodynamic and Light Scattering Studies | 5.0 | 11 | Citations (PDF) |
| 237 | Polymethine Dye-Functionalized Nanoparticles for Targeting CML Stem Cells | 4.9 | 4 | Citations (PDF) |
| 238 | Self-Assembly of Copolyesters into Stereocomplex Crystallites Tunes the Properties of Polyester Nanoparticles | 5.0 | 15 | Citations (PDF) |
| 239 | Dual Photo- and pH-Responsive Spirooxazine-Functionalized Dextran Nanoparticles | 5.1 | 14 | Citations (PDF) |
| 240 | Microwave‐Assisted Synthesis of Core–Shell Nanoparticles—Insights into the Growth of Different Geometries | 2.8 | 11 | Citations (PDF) |
| 241 | Formulation of Liver-Specific PLGA-DY-635 Nanoparticles Loaded with the Protein Kinase C Inhibitor Bisindolylmaleimide I | 4.9 | 10 | Citations (PDF) |
| 242 | PLA/PLGA-Based Drug Delivery Systems Produced with Supercritical CO2—A Green Future for Particle Formulation? | 4.9 | 47 | Citations (PDF) |
| 243 | Optimized Encapsulation of the FLAP/PGES-1 Inhibitor BRP-187 in PVA-Stabilized PLGA Nanoparticles Using Microfluidics | 4.5 | 11 | Citations (PDF) |
| 244 | Degradable Poly(2-oxazoline) Analogues from Partially Oxidized Poly(ethylene imine) | 5.0 | 18 | Citations (PDF) |
| 245 | Performance and Stability of Organic Solar Cells Bearing Nitrogen Containing Electron Extraction Layers | 3.4 | 2 | Citations (PDF) |
| 246 | Facile and Reliable Emission‐Based Nanomolar Anion Sensing by Luminescent Iridium Receptors Featuring Chelating Halogen‐Bonding Sites | 3.4 | 10 | Citations (PDF) |
| 247 | Is electron ping-pong limiting the catalytic hydrogen evolution activity in covalent photosensitizer–polyoxometalate dyads? | 3.4 | 18 | Citations (PDF) |
| 248 | Two-Photon Polymerized Poly(2-Ethyl-2-Oxazoline) Hydrogel 3D Microstructures with Tunable Mechanical Properties for Tissue Engineering | 4.2 | 25 | Citations (PDF) |
| 249 | Aqueous Redox Flow Battery Suitable for High Temperature Applications Based on a Tailor‐Made Ferrocene Copolymer | 22.5 | 61 | Citations (PDF) |
| 250 | Automated Polymer Purification Using Dialysis | 4.5 | 21 | Citations (PDF) |
| 251 | Polymer‐Based Batteries—Flexible and Thin Energy Storage Systems | 24.5 | 152 | Citations (PDF) |
| 252 | Gradient and asymmetric copolymers: the role of the copolymer composition profile in the ionization of weak polyelectrolytes | 3.9 | 11 | Citations (PDF) |
| 253 | Salient features of medical nanoparticles in biological fluids from an analytical ultracentrifuge | 5.0 | 9 | Citations (PDF) |
| 254 | Kinetic Investigations of Quaternization Reactions of Poly[2‐(dimethylamino)ethyl methacrylate] with Diverse Alkyl Halides | 2.4 | 18 | Citations (PDF) |
| 255 | Encapsulation of the dual FLAP/mPEGS-1 inhibitor BRP-187 into acetalated dextran and PLGA nanoparticles improves its cellular bioactivity | 11.4 | 27 | Citations (PDF) |
| 256 | Predicting Solubility of Small Molecules in Macromolecular Compounds for Nanomedicine Application from Atomistic Simulations | 2.7 | 18 | Citations (PDF) |
| 257 | Dithiafulvenyl-equipped Ru(II) bis-terpyridine complexes – Synthesis, photophysical and electrochemical properties | 2.8 | 3 | Citations (PDF) |
| 258 | Tunable nanogels by host–guest interaction with carboxylate pillar[5]arene for controlled encapsulation and release of doxorubicin | 5.0 | 10 | Citations (PDF) |
| 259 | Poly(ethylene glycol) or poly(2-ethyl-2-oxazoline) – A systematic comparison of PLGA nanoparticles from the bottom up | 5.9 | 20 | Citations (PDF) |
| 260 | Copolymerization of Caprolactone Isomers to Obtain Nanoparticles with Constant Hydrophobicity and Tunable Crystallinity | 5.0 | 16 | Citations (PDF) |
| 261 | Disentanglement of Degradation Mechanisms by Analyzing Aging Dynamics of Environmentally Friendly Processed Polymer Solar Cells | 3.4 | 10 | Citations (PDF) |
| 262 | Microwave irradiation versus conventional heating assisted free-radical copolymerization in solution | 12.0 | 20 | Citations (PDF) |
| 263 | Synthesis of a fructose decorated PAGE-b-PEG-b-PLGA polymer with subsequent formulation of nanoparticles | 5.2 | 2 | Citations (PDF) |
| 264 | Straightforward Access to Glycosylated, Acid Sensitive Nanogels by Host–Guest Interactions with Sugar-Modified Pillar[5]arenes | 5.0 | 16 | Citations (PDF) |
| 265 | Organic linkage controls the photophysical properties of covalent photosensitizer–polyoxometalate hydrogen evolution dyads | 3.9 | 8 | Citations (PDF) |
| 266 | A novel approach for the quantification of scratch healing of polymers | 5.4 | 17 | Citations (PDF) |
| 267 | Polysaccharide valproates: Structure - property relationships in solution | 12.2 | 18 | Citations (PDF) |
| 268 | Incentives of Using the Hydrodynamic Invariant and Sedimentation Parameter for the Study of Naturally- and Synthetically-Based Macromolecules in Solution | 4.5 | 31 | Citations (PDF) |
| 269 | Degradable polycaprolactone nanoparticles stabilized via supramolecular host–guest interactions with pH-responsive polymer-pillar[5]arene conjugates | 3.9 | 4 | Citations (PDF) |
| 270 | Improved Bioactivity of the Natural Product 5-Lipoxygenase Inhibitor Hyperforin by Encapsulation into Polymeric Nanoparticles | 4.2 | 26 | Citations (PDF) |
| 271 | Quantification of the scratch-healing efficiency for novel zwitterionic polymers | 7.4 | 29 | Citations (PDF) |
| 272 | Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures | 50.7 | 1,611 | Citations (PDF) |
| 273 | Block Copolymers Composed of PEtOx and Polyesteramides Based on Glycolic Acid, l-Valine, and l-Isoleucine | 5.0 | 19 | Citations (PDF) |
| 274 | Synthesis and characterization of hydrogels containing redox‐responsive 2,2,6,6‐tetramethylpiperidinyloxy methacrylate and thermoresponsive N‐isopropylacrylamide | 3.9 | 4 | Citations (PDF) |
| 275 | Caspofungin Functionalized Polymethacrylates with Antifungal Properties | 5.1 | 20 | Citations (PDF) |
| 276 | Lanthanoids Goes Healing: Lanthanoidic Metallopolymers and Their Scratch Closure Behavior | 4.5 | 5 | Citations (PDF) |
| 277 | Metal‐Terpyridine Complexes in Catalytic Application – A Spotlight on the Last Decade | 3.6 | 102 | Citations (PDF) |
| 278 | Cell-Penetrating, Peptide-Based RAFT Agent for Constructing Penetration Enhancers | 5.0 | 24 | Citations (PDF) |
| 279 | pH-responsive SERS substrates based on AgNP-polyMETAC composites on patterned self-assembled monolayers | 2.6 | 10 | Citations (PDF) |
| 280 | Aprotic and Protic Ionic Liquids as Electrolytes for Organic Radical Polymers | 3.1 | 12 | Citations (PDF) |
| 281 | One‐Pot Synthesis of Block Copolymers by a Combination of Living Cationic and Controlled Radical Polymerization | 4.1 | 20 | Citations (PDF) |
| 282 | Thermally induced degradation of PBDTTT-CT:PCBM based polymer solar cells | 2.9 | 14 | Citations (PDF) |
| 283 | Synthesis and characterisation of redox hydrogels based on stable nitroxide radicals | 2.6 | 18 | Citations (PDF) |
| 284 | Sustainable Energy Storage: Recent Trends and Developments toward Fully Organic Batteries | 6.2 | 198 | Citations (PDF) |
| 285 | An Amperometric, Temperature-Independent, and Calibration-Free Method for the Real-Time State-of-Charge Monitoring of Redox Flow Battery Electrolytes | 6.7 | 23 | Citations (PDF) |
| 286 | Analytical ultracentrifugation and other techniques in studying highly disperse nano-crystalline cellulose hybrids | 4.4 | 5 | Citations (PDF) |
| 287 | High-Yielding Syntheses of Multifunctionalized RuII Polypyridyl-Type Sensitizer: Experimental and Computational Insights into Coordination | 4.6 | 8 | Citations (PDF) |
| 288 | Amino Acid–Substituted Dextran‐Based Non‐Viral Vectors for Gene Delivery | 4.0 | 22 | Citations (PDF) |
| 289 | Semiautomated Parallel RAFT Copolymerization of Isoprene with Glycidyl Methacrylate | 4.5 | 20 | Citations (PDF) |
| 290 | Poly(n‐alkyl methacrylate)s as Metallocene Catalyst Supports in Nonpolar Media | 2.4 | 3 | Citations (PDF) |
| 291 | Crosslinkable/functionalizable poly(2-oxazoline)based micelles | 5.9 | 5 | Citations (PDF) |
| 292 | Detailed Analysis of the Influencing Parameters on the Self-Healing Behavior of Dynamic Urea-Crosslinked Poly(methacrylate)s | 4.2 | 7 | Citations (PDF) |
| 293 | Combinations of Antimicrobial Polymers with Nanomaterials and Bioactives to Improve Biocidal Therapies | 4.5 | 36 | Citations (PDF) |
| 294 | Strontium Isopropoxide: A Highly Active Catalyst for the Ring‐Opening Polymerization of Lactide and Various Lactones | 4.1 | 25 | Citations (PDF) |
| 295 | (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl-Containing Zwitterionic Polymer as Catholyte Species for High-Capacity Aqueous Polymer Redox Flow Batteries | 6.7 | 84 | Citations (PDF) |
| 296 | Impact of P3HT materials properties and layer architecture on OPV device stability | 6.1 | 31 | Citations (PDF) |
| 297 | The influence of gradient and statistical arrangements of guanidinium or primary amine groups in poly(methacrylate) copolymers on their DNA binding affinity | 5.5 | 16 | Citations (PDF) |
| 298 | Poly(3-ethylglycolide): a well-defined polyester matching the hydrophilic hydrophobic balance of PLA | 3.9 | 22 | Citations (PDF) |
| 299 | The supramolecular assemblies based on heteroatom-containing triangulenes | 6.1 | 20 | Citations (PDF) |
| 300 | Remote control of electronic coupling – modification of excited-state electron-transfer rates in Ru(tpy)2-based donor–acceptor systems by remote ligand design | 3.4 | 9 | Citations (PDF) |
| 301 | Poly(2-oxazoline)-Containing Triblock Copolymers: Synthesis and Applications | 14.2 | 24 | Citations (PDF) |
| 302 | Femtosecond laser-induced scratch ablation as an efficient new method to evaluate the self-healing behavior of supramolecular polymers | 9.3 | 8 | Citations (PDF) |
| 303 | Effect of surfactant on the size and stability of PLGA nanoparticles encapsulating a protein kinase C inhibitor | 4.8 | 64 | Citations (PDF) |
| 304 | Accumulative Charging of Redox-Active Side-Chain-Modified Polymers: Experimental and Computational Insights from Oligo- to Polymeric Triarylamines | 5.0 | 5 | Citations (PDF) |
| 305 | State-of-charge monitoring for redox flow batteries: A symmetric open-circuit cell approach | 7.9 | 20 | Citations (PDF) |
| 306 | Influence of the salt concentration on the electrochemical performance of electrodes for polymeric batteries | 5.3 | 15 | Citations (PDF) |
| 307 | Utilization of 4‐(trifluoromethyl)benzenesulfonates as Counter Ions Tunes the Initiator Efficiency of Sophisticated Initiators for the Preparation of Well‐Defined poly(2‐oxazoline)s | 4.1 | 6 | Citations (PDF) |
| 308 | Superexchange in the fast lane – intramolecular electron transfer in a molecular triad occurs by conformationally gated superexchange | 3.4 | 4 | Citations (PDF) |
| 309 | Electron Density of Polymeric Nanoparticles Determined by Image Processing of Transmission Electron Micrographs: Insights into Heavy Metal Staining Processes | 2.8 | 1 | Citations (PDF) |
| 310 | Structure-property relationships via complementary hydrodynamic approaches: Poly(2-(dimethylamino)ethyl methacrylate)s | 4.1 | 14 | Citations (PDF) |
| 311 | Shape-Memory Metallopolymer Networks Based on a Triazole–Pyridine Ligand | 4.5 | 9 | Citations (PDF) |
| 312 | Preparation of hydrophobically modified associating multiblock copolymers
via
a one-pot aqueous RAFT polymerization | 3.9 | 15 | Citations (PDF) |
| 313 | Stabilization of Silver Nanoparticles by Cationic Aminoethyl Methacrylate Copolymers in Aqueous Media—Effects of Component Ratios and Molar Masses of Copolymers | 4.5 | 1 | Citations (PDF) |
| 314 | Towards Covalent Photosensitizer-Polyoxometalate Dyads-Bipyridyl-Functionalized Polyoxometalates and Their Transition Metal Complexes | 4.2 | 7 | Citations (PDF) |
| 315 | Smart pH-Sensitive Nanogels for Controlled Release in an Acidic Environment | 5.1 | 50 | Citations (PDF) |
| 316 | Platinum‐terpyridine complexes in polymers: A novel approach for the synthesis of self‐healing metallopolymers | 2.7 | 14 | Citations (PDF) |
| 317 | Mechanical Activation of Terpyridine Metal Complexes in Polymers | 4.3 | 10 | Citations (PDF) |
| 318 | The Influence of the Electrolyte Composition on the Electrochemical Behaviour of Organic Radical Polymers | 0.0 | 0 | Citations (PDF) |
| 319 | POx as an Alternative to PEG? A Hydrodynamic and Light Scattering Study | 5.0 | 119 | Citations (PDF) |
| 320 | Hydrogel-Embedded Model Photocatalytic System Investigated by Raman and IR Spectroscopy Assisted by Density Functional Theory Calculations and Two-Dimensional Correlation Analysis | 2.5 | 8 | Citations (PDF) |
| 321 | Spherical and Worm‐Like Micelles from Fructose‐Functionalized Polyether Block Copolymers | 4.0 | 7 | Citations (PDF) |
| 322 | Accelerating the acidic degradation of a novel thermoresponsive polymer by host–guest interaction | 3.9 | 10 | Citations (PDF) |
| 323 | Influence of Aspartate Moieties on the Self‐Healing Behavior of Histidine‐Rich Supramolecular Polymers | 4.1 | 8 | Citations (PDF) |
| 324 | Urethanes as reversible covalent moieties in self-healing polymers | 5.9 | 25 | Citations (PDF) |
| 325 | Comparison of random and gradient amino functionalized poly(2‐oxazoline)s: Can the transfection efficiency be tuned by the macromolecular structure? | 2.3 | 7 | Citations (PDF) |
| 326 | Conjugated Oligomers as Fluorescence Marker for the Determination of the Self-Healing Efficiency in Mussel-Inspired Polymers | 6.7 | 23 | Citations (PDF) |
| 327 | Thermally Switchable Fluorescence Resonance Energy Transfer via Reversible Diels–Alder Reaction of π‐Conjugated Oligo‐(Phenylene Ethynylene)s | 4.1 | 6 | Citations (PDF) |
| 328 | Organic solar cells based on anthracene-containing PPE–PPVs and non-fullerene acceptors | 2.2 | 7 | Citations (PDF) |
| 329 | Determining solid/liquid interfacial energies in Al-Cu by curvature controlled melting point depression | 8.7 | 16 | Citations (PDF) |
| 330 | From Cubic Palladium to Concave Core-Shell Platinum Palladium Nanoparticles: Evolution of the Structure and Their Electrochemical Properties | 3.1 | 3 | Citations (PDF) |
| 331 | Direct detection of the photoinduced charge-separated state in a Ru(ii) bis(terpyridine)–polyoxometalate molecular dyad | 3.4 | 22 | Citations (PDF) |
| 332 | Temperature-Tuning of Optical Properties and Molecular Aggregation in AnE-PVstat Copolymer Solution | 3.1 | 10 | Citations (PDF) |
| 333 | Halogenbrücken in Lösung: Anionenerkennung, Templat‐gestützte Selbstorganisation und Organokatalyse | 1.4 | 55 | Citations (PDF) |
| 334 | Halogen Bonding in Solution: Anion Recognition, Templated Self‐Assembly, and Organocatalysis | 14.4 | 261 | Citations (PDF) |
| 335 | Fully Roll‐to‐Roll Printed P3HT/Indene‐C60‐Bisadduct Modules with High Open‐Circuit Voltage and Efficiency | 4.6 | 19 | Citations (PDF) |
| 336 | Synthesis and Characterization of a Phthalimide‐Containing Redox‐Active Polymer for High‐Voltage Polymer‐Based Redox‐Flow Batteries | 2.4 | 25 | Citations (PDF) |
| 337 | PtII Phosphors with Click-Derived 1,2,3-Triazole-Containing Tridentate Chelates | 2.9 | 35 | Citations (PDF) |
| 338 | Do You Get What You See? Understanding Molecular Self‐Healing | 3.4 | 22 | Citations (PDF) |
| 339 | How To Tune the Gene Delivery and Biocompatibility of Poly(2-(4-aminobutyl)-2-oxazoline) by Self- and Coassembly | 5.1 | 18 | Citations (PDF) |
| 340 | Oxidation-responsive micelles by a one-pot polymerization-induced self-assembly approach | 3.9 | 66 | Citations (PDF) |
| 341 | An aqueous all-organic redox-flow battery employing a (2,2,6,6-tetramethylpiperidin-1-yl)oxyl-containing polymer as catholyte and dimethyl viologen dichloride as anolyte | 7.9 | 79 | Citations (PDF) |
| 342 | Uptake and Intracellular Fate of Engineered Nanoparticles in Mammalian Cells: Capabilities and Limitations of Transmission Electron Microscopy—Polymer‐Based Nanoparticles | 24.5 | 84 | Citations (PDF) |
| 343 | Beyond Gene Transfection with Methacrylate-Based Polyplexes—The Influence of the Amino Substitution Pattern | 3.8 | 31 | Citations (PDF) |
| 344 | Lichtgesteuerte Freisetzung von Chemikalien aus polymeren Nano‐ und Mikropartikelbehältern | 1.4 | 3 | Citations (PDF) |
| 345 | Coexistence of distinct intramolecular electron transfer pathways in polyoxometalate based molecular triads | 2.7 | 9 | Citations (PDF) |
| 346 | A healing ionomer crosslinked by a bis-bidentate halogen bond linker: a route to hard and healable coatings | 3.9 | 28 | Citations (PDF) |
| 347 | Identification of multi-target inhibitors of leukotriene and prostaglandin E2 biosynthesis by structural tuning of the FLAP inhibitor BRP-7 | 5.3 | 32 | Citations (PDF) |
| 348 | Photocontrolled Release of Chemicals from Nano‐ and Microparticle Containers | 14.4 | 26 | Citations (PDF) |
| 349 | Remendable polymers via reversible Diels–Alder cycloaddition of anthracene‐containing copolymers with fullerenes | 2.7 | 17 | Citations (PDF) |
| 350 | Old meets new: Combination of PLA and RDRP to obtain sophisticated macromolecular architectures | 25.1 | 50 | Citations (PDF) |
| 351 | The N-Terminus of the HIV-1 p6 Gag Protein Regulates Susceptibility to Degradation by IDE | 3.2 | 4 | Citations (PDF) |
| 352 | Fast Screening of Diol Impurities in Methoxy Poly(Ethylene Glycol)s (mPEG)s by Liquid Chromatography on Monolithic Silica Rods | 4.5 | 13 | Citations (PDF) |
| 353 | “Chemistry-on-the-complex”: functional RuIIpolypyridyl-type sensitizers as divergent building blocks | 37.7 | 109 | Citations (PDF) |
| 354 | “Green” ethers as solvent alternatives for anionic ring-opening polymerizations of ethylene oxide (EO): In-situ kinetic and advanced characterization studies | 4.1 | 12 | Citations (PDF) |
| 355 | Rethinking the impact of the protonable amine density on cationic polymers for gene delivery: A comparative study of partially hydrolyzed poly(2-ethyl-2-oxazoline)s and linear poly(ethylene imine)s | 4.0 | 12 | Citations (PDF) |
| 356 | The influence of the electrolyte composition on the electrochemical behaviour of cathodic materials for organic radical batteries | 7.9 | 27 | Citations (PDF) |
| 357 | Asymmetric Copolymers: Synthesis, Properties, and Applications of Gradient and Other Partially Segregated Copolymers | 4.1 | 53 | Citations (PDF) |
| 358 | The great escape: how cationic polyplexes overcome the endosomal barrier | 5.5 | 379 | Citations (PDF) |
| 359 | Palladium‐SCS Pincer Complexes as Cross‐Linking Moieties in Self‐Healing Metallopolymers | 4.1 | 10 | Citations (PDF) |
| 360 | TBD‐Catalyzed Ring‐Opening Polymerization of Alkyl‐Substituted Morpholine‐2,5‐Dione Derivatives | 4.1 | 35 | Citations (PDF) |
| 361 | Aluminum Electrode Insulation Dynamics via Interface Oxidation by Reactant Diffusion in Organic Layers | 1.5 | 3 | Citations (PDF) |
| 362 | LCST behavior of poly(2-ethyl-2-oxazoline) containing diblock and triblock copolymers | 5.9 | 16 | Citations (PDF) |
| 363 | Improvement of polymer:fullerene bulk heterojunction morphology via temperature and anti-solvent effect | 4.5 | 10 | Citations (PDF) |
| 364 | The Power of Shielding: Low Toxicity and High Transfection Performance of Cationic Graft Copolymers Containing Poly(2-oxazoline) Side Chains | 5.1 | 12 | Citations (PDF) |
| 365 | A translation of the structure of mussel byssal threads into synthetic materials by the utilization of histidine-rich block copolymers | 3.9 | 14 | Citations (PDF) |
| 366 | Considerations for the Uptake Characteristic of Inorganic Nanoparticles into Mammalian Cells—Insights Gained by TEM Investigations | 3.4 | 6 | Citations (PDF) |
| 367 | Micro‐Tubular Flow Cell Design Utilizing Commercial Hollow Fiber Dialysis Membranes for Size‐Exclusion Based Flow Batteries | 3.4 | 8 | Citations (PDF) |
| 368 | Stability of organic solar cells with PCDTBT donor polymer: An interlaboratory study | 2.5 | 20 | Citations (PDF) |
| 369 | Pharmapolymers in the 21st century: Synthetic polymers in drug delivery applications | 25.1 | 232 | Citations (PDF) |
| 370 | Flexible Thermoelectric Polymer Composites Based on a Carbon Nanotubes Forest | 17.0 | 42 | Citations (PDF) |
| 371 | PMMA-g-OEtOx Graft Copolymers: Influence of Grafting Degree and Side Chain Length on the Conformation in Aqueous Solution | 2.9 | 16 | Citations (PDF) |
| 372 | High-temperature stable single carrier hole only device based on conjugated polymers | 2.5 | 9 | Citations (PDF) |
| 373 | Maintaining the Hydrophilic–Hydrophobic Balance of Polyesters with Adjustable Crystallinity for Tailor-Made Nanoparticles | 5.0 | 25 | Citations (PDF) |
| 374 | Controlling donor crystallinity and phase separation in bulk heterojunction solar cells by the introduction of orthogonal solvent additives | 0.9 | 7 | Citations (PDF) |
| 375 | pNTQS: Easily Accessible High-Capacity Redox-Active Polymer for Organic Battery Electrodes | 5.4 | 14 | Citations (PDF) |
| 376 | Investigations on the modification of PMMA by ultrafast laser radiation from the UV to the mid-IR spectral range | 3.6 | 8 | Citations (PDF) |
| 377 | Kinetic and Copolymer Composition Investigations of the Free Radical Copolymerization of 1‐Octene with Glycidyl Methacrylate | 2.4 | 11 | Citations (PDF) |
| 378 | Sol–gel synthesis of Mg(OH)2 and Ca(OH)2 nanoparticles: a comparative study of their antifungal activity in partially quaternized p(DMAEMA) nanocomposite films | 2.7 | 18 | Citations (PDF) |
| 379 | Redox‐Flow‐Batterien: von metallbasierten zu organischen Aktivmaterialien | 1.4 | 97 | Citations (PDF) |
| 380 | Dual pH and ultrasound responsive nanoparticles with pH triggered surface charge-conversional properties | 3.9 | 41 | Citations (PDF) |
| 381 | A bipolar nitronyl nitroxide small molecule for an all-organic symmetric redox-flow battery | 7.4 | 76 | Citations (PDF) |
| 382 | Histidine–Zinc Interactions Investigated by Isothermal Titration Calorimetry (ITC) and their Application in Self‐Healing Polymers | 2.4 | 42 | Citations (PDF) |
| 383 | Aqueous 2,2,6,6-Tetramethylpiperidine-N-oxyl Catholytes for a High-Capacity and High Current Density Oxygen-Insensitive Hybrid-Flow Battery | 17.0 | 188 | Citations (PDF) |
| 384 | Increased stability in self‐healing polymer networks based on reversible Michael addition reactions | 2.7 | 26 | Citations (PDF) |
| 385 | Optimized Photoinitiator for Fast Two‐Photon Absorption Polymerization of Polyester‐Macromers for Tissue Engineering | 2.9 | 25 | Citations (PDF) |
| 386 | Halogen-bond-based cooperative ion-pair recognition by a crown-ether-embedded 5-iodo-1,2,3-triazole | 3.4 | 48 | Citations (PDF) |
| 387 | Tailoring Cellular Uptake and Fluorescence of Poly(2-oxazoline)-Based Nanogels | 3.8 | 19 | Citations (PDF) |
| 388 | Synthesis and Electrochemical Study of a TCAA Derivative – A potential bipolar redox-active material | 5.3 | 14 | Citations (PDF) |
| 389 | Soluble PtII-Containing Polymers Based on a 2,6-Bis(1H-1,2,3-triazol-4-yl)-4-ethynylpyridine Ligand | 5.0 | 16 | Citations (PDF) |
| 390 | Polymeric Halogen‐Bond‐Based Donor Systems Showing Self‐Healing Behavior in Thin Films | 14.4 | 94 | Citations (PDF) |
| 391 | An Approach Toward Replacing Vanadium: A Single Organic Molecule for the Anode and Cathode of an Aqueous Redox‐Flow Battery | 2.6 | 78 | Citations (PDF) |
| 392 | High-Power-Density Organic Radical Batteries | 7.3 | 96 | Citations (PDF) |
| 393 | Poly(N-alkyl-3,6-carbazole)s via Suzuki–Miyaura Polymerization: From Macrocyclization toward End Functionalization | 5.0 | 15 | Citations (PDF) |
| 394 | Energy versus Electron Transfer: Controlling the Excitation Transfer in Molecular Triads | 3.4 | 22 | Citations (PDF) |
| 395 | Hydrophilic Poly(naphthalene diimide)‐Based Acceptor–Photosensitizer Dyads: Toward Water‐Processible Modular Photoredox‐Active Architectures | 2.4 | 10 | Citations (PDF) |
| 396 | Effect of the Degree of Quaternization and Molar Mass on the Cloud Point of Poly[2‐(dimethylamino)ethyl methacrylate] Aqueous Solutions: A Systematic Investigation | 2.4 | 26 | Citations (PDF) |
| 397 | Tracing the fate and transport of secondary plant metabolites in a laboratory mesocosm experiment by employing mass spectrometric imaging | 3.4 | 12 | Citations (PDF) |
| 398 | Synthetic approaches towards structurally-defined electrochemically and (photo)redox-active polymer architectures | 37.7 | 31 | Citations (PDF) |
| 399 | d‐Fructose‐Decorated Poly(ethylene imine) for Human Breast Cancer Cell Targeting | 4.0 | 14 | Citations (PDF) |
| 400 | Spatial and Temporal Localization of Flavonoid Metabolites in Strawberry Fruit (Fragaria × ananassa) | 6.0 | 45 | Citations (PDF) |
| 401 | Increased Charge Separation Rates with Increasing Donor–Acceptor Distance in Molecular Triads: The Effect of Solvent Polarity | 3.1 | 21 | Citations (PDF) |
| 402 | Synthesis of d-fructose conjugated ligands via C6 and C1 and their corresponding [Ru(bpy)2(L)]Cl2 complexes | 2.2 | 5 | Citations (PDF) |
| 403 | Thermosensitive spontaneous gradient copolymers with block- and gradient-like features | 3.9 | 46 | Citations (PDF) |
| 404 | An Amphiphilic Ruthenium Polymetallodrug for Combined Photodynamic Therapy and Photochemotherapy In Vivo | 24.5 | 243 | Citations (PDF) |
| 405 | In situ monitoring of molecular changes during cell differentiation processes in marine macroalgae through mass spectrometric imaging | 3.4 | 21 | Citations (PDF) |
| 406 | Current Density and Heating Patterns in Organic Solar Cells Reproduced by Finite Element Modeling | 4.6 | 2 | Citations (PDF) |
| 407 | Mild electropolymerization and monitoring of continuous film formation for photoredox-active Ru metallopolymers | 5.1 | 11 | Citations (PDF) |
| 408 | 3rd generation poly(ethylene imine)s for gene delivery | 5.5 | 47 | Citations (PDF) |
| 409 | Hydrodynamic Analysis Resolves the Pharmaceutically-Relevant Absolute Molar Mass and Solution Properties of Synthetic Poly(ethylene glycol)s Created by Varying Initiation Sites | 6.5 | 39 | Citations (PDF) |
| 410 | Site-Specific POxylation of Interleukin-4 | 5.3 | 47 | Citations (PDF) |
| 411 | A New Approach Toward Metal‐Free Self‐Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers | 2.4 | 16 | Citations (PDF) |
| 412 | Directed Orientation of Oligo(phenylene ethynylene)s Using Ureas or Urethanes in Rod–Coil Copolymers | 2.4 | 6 | Citations (PDF) |
| 413 | A multidonor–photosensitizer–multiacceptor triad for long-lived directional charge separation | 2.7 | 20 | Citations (PDF) |
| 414 | Molecular and structural analysis via hydrodynamic methods: Cationic poly(2-aminoethyl-methacrylate)s | 4.1 | 6 | Citations (PDF) |
| 415 | Bifunctional Initiators as Tools to Track Chain Transfer during the CROP of 2‐Oxazolines | 4.1 | 11 | Citations (PDF) |
| 416 | Ordered Arrangement and Optical Properties of Silica‐Stabilized Gold Nanoparticle–PNIPAM Core–Satellite Clusters for Sensitive Raman Detection | 11.5 | 18 | Citations (PDF) |
| 417 | Intrinsic self-healing polymers with a high E-modulus based on dynamic reversible urea bonds | 7.4 | 121 | Citations (PDF) |
| 418 | Metal–Polymer Hybrid Nanoparticles for Correlative High‐Resolution Light and Electron Microscopy | 2.8 | 2 | Citations (PDF) |
| 419 | Extending Long‐lived Charge Separation Between Donor and Acceptor Blocks in Novel Copolymer Architectures Featuring a Sensitizer Core | 3.4 | 20 | Citations (PDF) |
| 420 | Molecular Dyads and Triads Based on Phenothiazine and π‐Extended Tetrathiafulvalene Donors, Bis(terpyridine)ruthenium(II) Complexes, and Polyoxometalates | 1.8 | 18 | Citations (PDF) |
| 421 | Uptake of Retinoic Acid‐Modified PMMA Nanoparticles in LX‐2 and Liver Tissue by Raman Imaging and Intravital Microscopy | 4.0 | 13 | Citations (PDF) |
| 422 | Polymerbasierte Halogenbrückendonoren mit selbstheilenden Eigenschaften in Filmen | 1.4 | 14 | Citations (PDF) |
| 423 | Polymersomes with Endosomal pH-Induced Vesicle-to-Micelle Morphology Transition and a Potential Application for Controlled Doxorubicin Delivery | 5.1 | 38 | Citations (PDF) |
| 424 | RAFT polymerization and thio‐bromo substitution: An efficient way towards well‐defined glycopolymers | 2.3 | 5 | Citations (PDF) |
| 425 | Fast simultaneous assessment of renal and liver function using polymethine dyes in animal models of chronic and acute organ injury | 3.4 | 9 | Citations (PDF) |
| 426 | Absolute characteristics and conformation of cationic polymers by hydrodynamic approaches: Poly(AEMA-co-MAEMA-co-DMAEMA) copolymers | 5.9 | 8 | Citations (PDF) |
| 427 | Mission ImPOxable – or the unknown utilization of non-toxic poly(2-oxazoline)s as cryoprotectants and surfactants at the same time | 5.5 | 14 | Citations (PDF) |
| 428 | Linear poly(ethylene imine)s: true molar masses, solution properties and conformation | 3.9 | 19 | Citations (PDF) |
| 429 | Retinol initiated poly(lactide)s: stability upon polymerization and nanoparticle preparation | 3.9 | 16 | Citations (PDF) |
| 430 | Land-use and fire drive temporal patterns of soil solution chemistry and nutrient fluxes | 8.4 | 27 | Citations (PDF) |
| 431 | Asymmetric Cyclometalated RuII Polypyridyl-Type Complexes with π-Extended Carbanionic Donor Sets | 4.6 | 13 | Citations (PDF) |
| 432 | Contributions of hard and soft blocks in the self-healing of metal-ligand-containing block copolymers | 5.9 | 38 | Citations (PDF) |
| 433 | Local phytochemical response of Musa acuminata × balbisiana Colla cv. ‘Bluggoe’ (ABB) to colonization by Sternorrhyncha | 3.1 | 5 | Citations (PDF) |
| 434 | All‐Organic Battery Composed of Thianthrene‐ and TCAQ‐Based Polymers | 22.5 | 145 | Citations (PDF) |
| 435 | One-pot synthesis of electro-active polymer gels via Cu(0)-mediated radical polymerization and click chemistry | 3.9 | 17 | Citations (PDF) |
| 436 | Bi-diketopyrrolopyrrole (Bi-DPP) as a novel electron accepting compound in low band gap π-conjugated donor–acceptor copolymers/oligomers | 2.1 | 1 | Citations (PDF) |
| 437 | Effect of ecosystem type and fire on chemistry of WEOM as measured by LDI-TOF-MS and NMR | 5.9 | 6 | Citations (PDF) |
| 438 | Redox‐Flow Batteries: From Metals to Organic Redox‐Active Materials | 14.4 | 939 | Citations (PDF) |
| 439 | A Tubular Polymer Redox Flow Battery with a Ceramic Membrane | 3.4 | 10 | Citations (PDF) |
| 440 | The influence of the grafting density of glycopolymers on the lectin binding affinity of block copolymer micelles | 4.1 | 9 | Citations (PDF) |
| 441 | Exploring the Limits of the Geometric Copolymerization Model | 4.5 | 1 | Citations (PDF) |
| 442 | Inhibitors of Deubiquitinating Enzymes Block HIV-1 Replication and Augment the Presentation of Gag-Derived MHC-I Epitopes | 3.2 | 32 | Citations (PDF) |
| 443 | One-pot synthesis of PLA-b-PHEA via sequential ROP and RAFT polymerizations | 3.9 | 20 | Citations (PDF) |
| 444 | Proteolysis of mature HIV-1 p6 Gag protein by the insulin-degrading enzyme (IDE) regulates virus replication in an Env-dependent manner | 2.3 | 9 | Citations (PDF) |
| 445 | <i>In</i>-<i>Situ</i> XAFS Characterization of PtPd Nanoparticles Synthesized by Galvanic Replacement | 0.9 | 3 | Citations (PDF) |
| 446 | Role of the post‐annealing conditions on the conductivity of niobium doped titanium dioxide electrodes prepared by sol–gel and their function in organic solar cells | 0.7 | 0 | Citations (PDF) |
| 447 | Ion Channel Activity of Vpu Proteins Is Conserved throughout Evolution of HIV-1 and SIV | 3.2 | 10 | Citations (PDF) |
| 448 | Glutamic Acid Residues in HIV-1 p6 Regulate Virus Budding and Membrane Association of Gag | 3.2 | 13 | Citations (PDF) |
| 449 | New Statistical Models for Copolymerization | 4.5 | 5 | Citations (PDF) |
| 450 | Revisiting the crystallization of poly(2-alkyl-2-oxazoline)s | 2.6 | 26 | Citations (PDF) |
| 451 | Preparation of non‐spherical particles from amphiphilic block copolymers | 2.3 | 22 | Citations (PDF) |
| 452 | Selective Uptake of a Fructose Glycopolymer Prepared by RAFT Polymerization into Human Breast Cancer Cells | 4.0 | 33 | Citations (PDF) |
| 453 | Assorted Phenoxyl-Radical Polymers and Their Application in Lithium-Organic Batteries | 4.1 | 23 | Citations (PDF) |
| 454 | End‐functionalized polylactides using a calcium‐based precatalyst: Synthesis and insights by mass spectrometry | 2.3 | 21 | Citations (PDF) |
| 455 | Gold Nanoparticle Cluster Arrays for High‐Performance SERS Substrates Fabricated by Electro‐oxidative Lithography | 2.5 | 10 | Citations (PDF) |
| 456 | Iridium(III) Complexes of Terpyridine‐ and Terpyridine‐Analogous Ligands Bearing Sugar Residues and Their in vitro Activity | 1.8 | 14 | Citations (PDF) |
| 457 | Intra‐ and inter‐supramolecular complexation of poly(butyl methacrylate)‐co‐2‐(1,2,3‐triazol‐4‐yl)pyridine copolymers induced by CoII, FeII, and EuIII ions monitored by molecular hydrodynamics methods | 2.3 | 5 | Citations (PDF) |
| 458 | Aqueous zinc-organic polymer battery with a high rate performance and long lifetime | 7.4 | 172 | Citations (PDF) |
| 459 | Reversible Nanopatterning on Polypyrrole Films by Atomic Force Microscope Electrochemical Lithography | 17.0 | 15 | Citations (PDF) |
| 460 | Significant Factors in the Inkjet Manufacture of Frequency-Selective Surfaces | 1.7 | 21 | Citations (PDF) |
| 461 | Conditional repair by locally switching the thermal healing capability of dynamic covalent polymers with light | 13.7 | 104 | Citations (PDF) |
| 462 | Wasserbasierte Redox‐Flow‐Batterie mit hoher Kapazität und Leistung: das TEMPTMA/MV‐System | 1.4 | 53 | Citations (PDF) |
| 463 | Immobilized glycopolymers: Synthesis, methods and applications | 25.1 | 44 | Citations (PDF) |
| 464 | Polymer architectures via mass spectrometry and hyphenated techniques: A review | 5.7 | 87 | Citations (PDF) |
| 465 | Synthesis and characterization of metallo-supramolecular polymers | 37.7 | 394 | Citations (PDF) |
| 466 | Efficient Energy Transfer and Metal Coupling in Cyanide-Bridged Heterodinuclear Complexes Based on (Bipyridine)(terpyridine)ruthenium(II) and (Phenylpyridine)iridium(III) Complexes | 4.6 | 22 | Citations (PDF) |
| 467 | Multigrid MALDI mass spectrometry imaging (mMALDI MSI) | 3.4 | 11 | Citations (PDF) |
| 468 | Modular Assembly of Poly(naphthalene diimide) and Ru(II) Dyes for an Efficient Light-Induced Charge Separation in Hierarchically Controlled Polymer Architectures | 5.0 | 18 | Citations (PDF) |
| 469 | Specific Surface versus Electrochemically Active Area of the Carbon/Polypyrrole Capacitor: Correlation of Ion Dynamics Studied by an Electrochemical Quartz Crystal Microbalance with BET Surface | 3.6 | 59 | Citations (PDF) |
| 470 | Poly(boron-dipyrromethene)—A Redox-Active Polymer Class for Polymer Redox-Flow Batteries | 6.7 | 110 | Citations (PDF) |
| 471 | HD DVD substrates for surface enhanced Raman spectroscopy analysis: fabrication, theoretical predictions and practical performance | 4.4 | 15 | Citations (PDF) |
| 472 | Polymerization of ethylene oxide under controlled monomer addition via a mass flow controller for tailor made polyethylene oxides | 3.9 | 13 | Citations (PDF) |
| 473 | Dual Responsive Nanoparticles from a RAFT Copolymer Library for the Controlled Delivery of Doxorubicin | 5.0 | 29 | Citations (PDF) |
| 474 | Trace detection of tetrahydrocannabinol (THC) with a SERS-based capillary platform prepared by the in situ microwave synthesis of AgNPs | 5.7 | 54 | Citations (PDF) |
| 475 | BRP-187: A potent inhibitor of leukotriene biosynthesis that acts through impeding the dynamic 5-lipoxygenase/5-lipoxygenase-activating protein (FLAP) complex assembly | 5.1 | 42 | Citations (PDF) |
| 476 | Facile carbohydrate-mimetic modifications of poly(ethylene imine) carriers for gene delivery applications | 3.9 | 12 | Citations (PDF) |
| 477 | Crossing the blood-brain barrier: Glutathione-conjugated poly(ethylene imine) for gene delivery | 11.0 | 63 | Citations (PDF) |
| 478 | LCST Behavior of Symmetrical PNiPAm-b-PEtOx-b-PNiPAm Triblock Copolymers | 5.0 | 62 | Citations (PDF) |
| 479 | Dyads and Triads Based on Phenothiazine, Bis(terpyridine)ruthenium(II) Complexes, and Fullerene | 1.8 | 9 | Citations (PDF) |
| 480 | Self‐Healing Polymer Networks Based on Reversible Michael Addition Reactions | 2.4 | 62 | Citations (PDF) |
| 481 | Synthesis and in vitro Toxicity of d‐Glucose and d‐Fructose Conjugated Curcumin–Ruthenium Complexes | 1.8 | 18 | Citations (PDF) |
| 482 | Polymer-Based Organic Batteries | 52.6 | 1,120 | Citations (PDF) |
| 483 | Oxime crosslinked polymer networks: Is every reversible covalent bond suitable to create self‐healing polymers? | 2.7 | 20 | Citations (PDF) |
| 484 | Directional Solidification with Constant Ice Front Velocity in the Ice‐Templating Process | 2.9 | 33 | Citations (PDF) |
| 485 | Investigation of Ice-Templated Porous Electrodes for Application in Organic Batteries | 8.0 | 28 | Citations (PDF) |
| 486 | ZnO Nanostructures for Dye‐Sensitized Solar Cells Using the TEMPO+/TEMPO Redox Mediator and Ruthenium(II) Photosensitizers with 1,2,3‐Triazole‐Derived Ligands | 2.6 | 17 | Citations (PDF) |
| 487 | Safety and regulatory review of dyes commonly used as excipients in pharmaceutical and nutraceutical applications | 4.3 | 83 | Citations (PDF) |
| 488 | Fluorescent amphiphilic heterografted comb polymers comprising biocompatible PLA and PEtOx side chains | 3.9 | 26 | Citations (PDF) |
| 489 | Antenna-Enhanced Triplet-State Emission of Individual Mononuclear Ruthenium(II)-Bis-terpyridine Complexes Reveals Their Heterogeneous Photophysical Properties in the Solid State | 6.0 | 9 | Citations (PDF) |
| 490 | Site‐Specific Chemical Surface Functionalization and Electronic Patterning of Graphene by Electrooxidative Lithography | 1.9 | 2 | Citations (PDF) |
| 491 | An aqueous, polymer-based redox-flow battery using non-corrosive, safe, and low-cost materials | 38.0 | 13 | Citations (PDF) |
| 492 | Thermodynamic compatibility of actives encapsulated into PEG‐PLA nanoparticles: In Silico predictions and experimental verification | 4.8 | 18 | Citations (PDF) |
| 493 | TEMPO/Phenazine Combi-Molecule: A Redox-Active Material for Symmetric Aqueous Redox-Flow Batteries | 17.0 | 187 | Citations (PDF) |
| 494 | Poly(N-alkyl-3,6-carbazole)s via Kumada Catalyst Transfer Polymerization: Impact of Metal–Halogen Exchange | 5.0 | 8 | Citations (PDF) |
| 495 | Microwave-assisted preparation of carbon nanofiber-functionalized graphite felts as electrodes for polymer-based redox-flow batteries | 7.9 | 20 | Citations (PDF) |
| 496 | An Aqueous Redox‐Flow Battery with High Capacity and Power: The TEMPTMA/MV System | 14.4 | 462 | Citations (PDF) |
| 497 | A Metal Salt Dependent Self-Healing Response in Supramolecular Block Copolymers | 5.0 | 37 | Citations (PDF) |
| 498 | Synthesis and characterization of colored EUDRAGIT®
as enteric coating material | 2.3 | 3 | Citations (PDF) |
| 499 | Abundance correction for mass discrimination effects in polymer mass spectra | 1.4 | 7 | Citations (PDF) |
| 500 | Poly(TEMPO)/Zinc Hybrid‐Flow Battery: A Novel, “Green,” High Voltage, and Safe Energy Storage System | 24.5 | 245 | Citations (PDF) |
| 501 | A new fluorescent dye for cell tracing and mitochondrial imaging in vitro and in vivo | 2.0 | 7 | Citations (PDF) |
| 502 | Nanoscale Materials Patterning by Local Electrochemical Lithography | 2.9 | 36 | Citations (PDF) |
| 503 | Molecular self-healing mechanisms between C60-fullerene and anthracene unveiled by Raman and two-dimensional correlation spectroscopy | 2.7 | 19 | Citations (PDF) |
| 504 | Cationic ring-opening polymerization of protected oxazolidine imines resulting in gradient copolymers of poly(2-oxazoline) and poly(urea) | 3.9 | 6 | Citations (PDF) |
| 505 | Aryl-Decorated RuII Polypyridyl-type Photosensitizer Approaching NIR Emission with Microsecond Excited State Lifetimes | 4.6 | 29 | Citations (PDF) |
| 506 | Antibacterial effect of silver (I) carbohydrate complexes on oral pathogenic key species in vitro | 2.8 | 6 | Citations (PDF) |
| 507 | Poly(DCAQI): Synthesis and characterization of a new redox-active polymer | 2.3 | 8 | Citations (PDF) |
| 508 | Synthesis and electrochemical properties of novel redox‐active polymers with anthraquinone moieties by Pd‐catalyzed cyclopolymerization of dienes | 2.3 | 17 | Citations (PDF) |
| 509 | Polymer/zinc hybrid-flow battery using block copolymer micelles featuring a TEMPO corona as catholyte | 3.9 | 94 | Citations (PDF) |
| 510 | Impact of PEG and PEG- b -PAGE modified PLGA on nanoparticle formation, protein loading and release | 4.8 | 39 | Citations (PDF) |
| 511 | 4,5-Diarylisoxazol-3-carboxylic acids: A new class of leukotriene biosynthesis inhibitors potentially targeting 5-lipoxygenase-activating protein (FLAP) | 5.3 | 52 | Citations (PDF) |
| 512 | Glycopolymer-Functionalized Cryogels as Catch and Release Devices for the Pre-Enrichment of Pathogens | 5.0 | 31 | Citations (PDF) |
| 513 | Cellular uptake of PLA nanoparticles studied by light and electron microscopy: synthesis, characterization and biocompatibility studies using an iridium(iii) complex as correlative label | 3.4 | 13 | Citations (PDF) |
| 514 | Antigen delivery via hydrophilic PEG- b -PAGE- b -PLGA nanoparticles boosts vaccination induced T cell immunity | 4.0 | 58 | Citations (PDF) |
| 515 | Microwave-Assisted Silver Nanoparticle Film Formation for SERS Applications | 3.1 | 31 | Citations (PDF) |
| 516 | Energy transfer and formation of long-lived 3MLCT states in multimetallic complexes with extended highly conjugated bis-terpyridyl ligands | 2.7 | 31 | Citations (PDF) |
| 517 | Metal complexes of curcumin and curcumin derivatives for molecular imaging and anticancer therapy | 23.1 | 120 | Citations (PDF) |
| 518 | Functionalized PEG‐b‐PAGE‐b‐PLGA triblock terpolymers as materials for nanoparticle preparation | 2.3 | 9 | Citations (PDF) |
| 519 | RAFT made methacrylate copolymers for reversible pH‐responsive nanoparticles | 2.3 | 22 | Citations (PDF) |
| 520 | Synthesis and Modification of Carbon Nanomaterials utilizing Microwave Heating | 24.5 | 340 | Citations (PDF) |
| 521 | Main‐Chain Chiral Poly(2‐oxazoline)s: Influence of Alkyl Side‐Chain on Secondary Structure Formation in the Solid State | 0.7 | 4 | Citations (PDF) |
| 522 | Lab in a Tube: Purification, Amplification, and Detection of DNA Using Poly(2‐oxazoline) Multilayers | 17.0 | 18 | Citations (PDF) |
| 523 | Reversible Calcium(II)‐Ion Binding through an Apparent p<i>K</i><sub>a</sub> Shift of Thermosensitive Block‐Copolymer Micelles | 1.4 | 3 | Citations (PDF) |
| 524 | Sensitization of NO‐Releasing Ruthenium Complexes to Visible Light | 3.4 | 17 | Citations (PDF) |
| 525 | Poly[N‐(10‐oxo‐2‐vinylanthracen‐9(10H)‐ylidene)cyanamide] as a novel cathode material for li‐organic batteries | 2.3 | 15 | Citations (PDF) |
| 526 | Reversible Calcium(II)‐Ion Binding through an Apparent pKa Shift of Thermosensitive Block‐Copolymer Micelles | 14.4 | 19 | Citations (PDF) |
| 527 | Two-dimensional Raman correlation spectroscopy reveals molecular structural changes during temperature-induced self-healing in polymers based on the Diels–Alder reaction | 2.7 | 44 | Citations (PDF) |
| 528 | Star-shaped poly(2-ethyl-2-oxazoline) featuring a porphyrin core: synthesis and metal complexation | 3.1 | 14 | Citations (PDF) |
| 529 | High resolution mass spectrometry imaging reveals the occurrence of phenylphenalenone-type compounds in red paracytic stomata and red epidermis tissue of Musa acuminata ssp. zebrina cv. ‘Rowe Red’ | 3.1 | 24 | Citations (PDF) |
| 530 | Electrodeposited palladium on MWCNTs as ‘semi-soluble heterogeneous’ catalyst for cross-coupling reactions | 1.4 | 14 | Citations (PDF) |
| 531 | Novel workflow for combining Raman spectroscopy and MALDI-MSI for tissue based studies | 3.4 | 41 | Citations (PDF) |
| 532 | Fluorinated Boronic Acid-Appended Bipyridinium Salts for Diol Recognition and Discrimination via 19F NMR Barcodes | 15.0 | 50 | Citations (PDF) |
| 533 | Toward Anisotropic Hybrid Materials: Directional Crystallization of Amphiphilic Polyoxazoline-Based Triblock Terpolymers | 15.3 | 32 | Citations (PDF) |
| 534 | The Self‐Healing Potential of Triazole‐Pyridine‐Based Metallopolymers | 4.1 | 40 | Citations (PDF) |
| 535 | Synthesis, characterization and charge–discharge studies of ferrocene-containing poly(fluorenylethynylene) derivatives as organic cathode materials | 4.1 | 36 | Citations (PDF) |
| 536 | Towards Hydrogen Evolution Initiated by LED Light: 2‐(1H‐1,2,3‐Triazol‐4‐yl)pyridine‐Containing Polymers as Photocatalyst | 4.1 | 19 | Citations (PDF) |
| 537 | Photoredox-active Dyads Based on a Ru(II) Photosensitizer Equipped with Electron Donor or Acceptor Polymer Chains: A Spectroscopic Study of Light-Induced Processes toward Efficient Charge Separation | 3.1 | 42 | Citations (PDF) |
| 538 | Anion Receptors Based on Halogen Bonding with Halo-1,2,3-triazoliums | 3.5 | 101 | Citations (PDF) |
| 539 | Dithiophenedione-Containing Polymers for Battery Application | 8.0 | 95 | Citations (PDF) |
| 540 | Molecular and Structural Characterization of Hybrid Poly(ethylene oxide)–Polyhedral Oligomeric Silesquioxanes Star-Shaped Macromolecules | 2.7 | 12 | Citations (PDF) |
| 541 | Physicochemical characterization of the thermo-induced self-assembly of thermo-responsive PDMAEMA-b
-PDEGMA copolymers | 2.3 | 19 | Citations (PDF) |
| 542 | Stabilization of factor VIII by poly(2‐oxazoline) hydrogels | 2.3 | 18 | Citations (PDF) |
| 543 | Inkjet printed paper based frequency selective surfaces and skin mounted RFID tags: the interrelation between silver nanoparticle ink, paper substrate and low temperature sintering technique | 5.1 | 78 | Citations (PDF) |
| 544 | Stimuli-responsive behavior of micelles prepared from a poly(vinyl alcohol)-block-poly(acrylic acid)-block-poly(4-vinylpyridine) triblock terpolymer | 5.9 | 17 | Citations (PDF) |
| 545 | Mechanisms and kinetics of the crystal thickening of poly(butadiene)-block-poly(ethylene oxide) during annealing within the melting range | 5.9 | 8 | Citations (PDF) |
| 546 | Synthesis and characterization of new redox-active polymers based on 10-(1,3-dithiol-2-ylidene)anthracen-9(10H)-one derivatives | 4.1 | 12 | Citations (PDF) |
| 547 | COCONUT—An Efficient Tool for Estimating Copolymer Compositions from Mass Spectra | 6.5 | 23 | Citations (PDF) |
| 548 | MALDI mass spectrometric imaging meets “omics”: recent advances in the fruitful marriage | 3.1 | 38 | Citations (PDF) |
| 549 | Synthesis, Separation, and Hypermethod Characterization of Gold Nanoparticle Dimers Connected by a Rigid Rod Linker | 3.1 | 18 | Citations (PDF) |
| 550 | Acylhydrazones as Reversible Covalent Crosslinkers for Self‐Healing Polymers | 17.0 | 246 | Citations (PDF) |
| 551 | Multifunctional poly(methacrylate) polyplex libraries: A platform for gene delivery inspired by nature | 11.0 | 20 | Citations (PDF) |
| 552 | MALDI imaging-based classification of hepatocellular carcinoma and non-malignant lesions in fibrotic liver tissue | 0.1 | 19 | Citations (PDF) |
| 553 | Block Copolymers for Directional Charge Transfer: Synthesis, Characterization, and Electrochemical Properties of Redox-Active Triarylamines | 5.0 | 14 | Citations (PDF) |
| 554 | Tuning the self-healing behavior of one-component intrinsic polymers | 4.1 | 42 | Citations (PDF) |
| 555 | Amphiphilic star-shaped brushes based on block copolymers-molecular micelles for the delivery of drugs: Hydrodynamic studies | 0.9 | 3 | Citations (PDF) |
| 556 | The correlation of the binding mechanism of the polypyrrole–carbon capacitive interphase with electrochemical stability of the composite electrode | 2.7 | 31 | Citations (PDF) |
| 557 | Self-healing response in supramolecular polymers based on reversible zinc–histidine interactions | 4.1 | 73 | Citations (PDF) |
| 558 | Schizophrenic thermoresponsive block copolymer micelles based on LCST and UCST behavior in ethanol–water mixtures | 5.9 | 28 | Citations (PDF) |
| 559 | Core cross-linked nanogels based on the self-assembly of double hydrophilic poly(2-oxazoline) block copolymers | 5.5 | 25 | Citations (PDF) |
| 560 | New Ruthenium Bis(terpyridine) Methanofullerene and Pyrrolidinofullerene Complexes: Synthesis and Electrochemical and Photophysical Properties | 4.6 | 26 | Citations (PDF) |
| 561 | Carbonyls: Powerful Organic Materials for Secondary Batteries | 22.5 | 779 | Citations (PDF) |
| 562 | Shape memory polymers: Past, present and future developments | 25.1 | 887 | Citations (PDF) |
| 563 | Detailed MALDI comparison of NiPAm glycopolymers | 5.9 | 1 | Citations (PDF) |
| 564 | Correlation between scratch healing and rheological behavior for terpyridine complex based metallopolymers | 9.3 | 86 | Citations (PDF) |
| 565 | Reversible oligomerization of 3-aryl-2-cyanothioacrylamides via [2s + 4s] cycloaddition to substituted 3,4-dihydro-2H-thiopyrans | 2.1 | 4 | Citations (PDF) |
| 566 | Microwave synthesis of carbon nanofibers – the influence of MW irradiation power, time, and the amount of catalyst | 9.3 | 34 | Citations (PDF) |
| 567 | Micropatterns of [Fe-Fe]-Hydrogenase Active-Site Model Complexes Fabricated by Electro-Oxidative Lithography | 3.6 | 3 | Citations (PDF) |
| 568 | Synthesis and characterization of TEMPO- and viologen-polymers for water-based redox-flow batteries | 3.9 | 130 | Citations (PDF) |
| 569 | An aqueous, polymer-based redox-flow battery using non-corrosive, safe, and low-cost materials | 38.0 | 922 | Citations (PDF) |
| 570 | Incorporation of core–shell particles into methacrylate based composites for improvement of the mechanical properties | 3.9 | 18 | Citations (PDF) |
| 571 | Biological evaluation of 1,2,3‐triazole‐based polymers for potential applications as hard tissue material | 2.3 | 8 | Citations (PDF) |
| 572 | Comparison of the uptake of methacrylate-based nanoparticles in static and dynamic in vitro systems as well as in vivo | 11.0 | 40 | Citations (PDF) |
| 573 | Enhancing the Biocompatibility and Biodegradability of Linear Poly(ethylene imine) through Controlled Oxidation | 5.0 | 25 | Citations (PDF) |
| 574 | The influence of polymer architecture on in vitro pDNA transfection | 5.5 | 74 | Citations (PDF) |
| 575 | Nanostructured organic radical cathodes from self-assembled nitroxide-containing block copolymer thin films | 9.3 | 28 | Citations (PDF) |
| 576 | Hyperbranched Poly(ethylene glycol) Copolymers: Absolute Values of the Molar Mass, Properties in Dilute Solution, and Hydrodynamic Homology | 5.0 | 35 | Citations (PDF) |
| 577 | Large-area wet-chemical deposition of nanoporous tungstic silica coatings | 5.1 | 4 | Citations (PDF) |
| 578 | Biodistribution of size-selected lyophilisomes in mice | 4.0 | 4 | Citations (PDF) |
| 579 | The effect of 3-amino benzoic acid linker and the reversal of donor–acceptor pairs on the electrochemical performance and stability of covalently bonded poly(pyrrole) nanotubes | 4.1 | 7 | Citations (PDF) |
| 580 | Preorganization in a Cleft-Type Anion Receptor Featuring Iodo-1,2,3-Triazoles As Halogen Bond Donors | 4.8 | 43 | Citations (PDF) |
| 581 | Homoleptic Tris(α,ω-alkanediyl)yttriates of the Type [{Li(dme)}3{Y(CH2-X-CH2)3}] (X = C2H4, C3H6, Si(CH3)2) | 2.9 | 9 | Citations (PDF) |
| 582 | Covalently cross-linked poly(2-oxazoline) materials for biomedical applications – from hydrogels to self-assembled and templated structures | 5.5 | 76 | Citations (PDF) |
| 583 | A Cationic Poly(2‐oxazoline) with High In Vitro Transfection Efficiency Identified by a Library Approach | 4.0 | 38 | Citations (PDF) |
| 584 | Metal‐Free Electrocatalyst for Oxygen Reduction: Synthesis‐Controlled Density of Catalytic Centers and Impact on ORR | 2.2 | 9 | Citations (PDF) |
| 585 | Mutation of the Highly Conserved Ser-40 of the HIV-1 p6 Gag Protein to Phe Causes the Formation of a Hydrophobic Patch, Enhances Membrane Association, and Polyubiquitination of Gag | 3.2 | 9 | Citations (PDF) |
| 586 | Synthesis of Functional Tripodal Thioacetates | 2.3 | 1 | Citations (PDF) |
| 587 | Synthesis of a Rigid Tetrahedral Linker with Thioether End Groups | 2.3 | 1 | Citations (PDF) |
| 588 | Structure–Property Relationships in an Iridium(III) Bis(Terpyridine) Complex with Extended Conjugated Side chains | 2.5 | 6 | Citations (PDF) |
| 589 | Poly(exTTF): A Novel Redox‐Active Polymer as Active Material for Li‐Organic Batteries | 4.1 | 42 | Citations (PDF) |
| 590 | Glycoconjugated Rhenium(I) and 99m‐Technetium(I) Carbonyl Complexes from Pyridyltriazole Ligands Obtained by “Click Chemistry” | 1.8 | 13 | Citations (PDF) |
| 591 | Poly(methacrylates) with Pendant Benzoquinone Units – Monomer Synthesis, Polymerization, and Electrochemical Behavior: Potential New Polymer Systems for Organic Batteries | 2.4 | 13 | Citations (PDF) |
| 592 | Poly(2‐vinyl pyridine)‐block‐Poly(ethylene oxide) Featuring a Furan Group at the Block Junction—Synthesis and Functionalization | 4.1 | 11 | Citations (PDF) |
| 593 | Cell type-specific delivery of short interfering RNAs by dye-functionalised theranostic nanoparticles | 13.7 | 61 | Citations (PDF) |
| 594 | Copper(II) ethylene glycol carboxylates as precursors for inkjet printing of conductive copper patterns | 1.9 | 42 | Citations (PDF) |
| 595 | Dextran-graft-linear poly(ethylene imine)s for gene delivery: Importance of the linking strategy | 12.2 | 36 | Citations (PDF) |
| 596 | Synthesis and in vitro
activity of platinum containing 2-oxazoline-based glycopolymers | 2.3 | 13 | Citations (PDF) |
| 597 | Amphiphilic N-methylimidazole-functionalized diblock copolythiophenes | 5.9 | 21 | Citations (PDF) |
| 598 | Designing Cyclometalated Ruthenium(II) Complexes for Anodic Electropolymerization | 3.4 | 23 | Citations (PDF) |
| 599 | ZnBr2-mediated synthesis of indoles in a ball mill by intramolecular hydroamination of 2-alkynylanilines | 4.4 | 41 | Citations (PDF) |
| 600 | Self-Assembling Doxorubicin–Tocopherol Succinate Prodrug as a New Drug Delivery System: Synthesis, Characterization, and in Vitro and in Vivo Anticancer Activity | 3.8 | 96 | Citations (PDF) |
| 601 | Efficient Cu(I) acetate‐catalyzed cycloaddition of multifunctional alkynes and azides: From solution to bulk polymerization | 2.3 | 24 | Citations (PDF) |
| 602 | Survey of Plasmonic Nanoparticles: From Synthesis to Application | 2.8 | 43 | Citations (PDF) |
| 603 | Alternative sintering methods compared to conventional thermal sintering for inkjet printed silver nanoparticle ink | 1.9 | 176 | Citations (PDF) |
| 604 | Synthesis and Characterization of Poly(phenylacetylene)s with Ru(II) Bis‐Terpyridine Complexes in the Side‐Chain | 4.1 | 7 | Citations (PDF) |
| 605 | Monitoring the chemistry of self-healing by vibrational spectroscopy – current state and perspectives | 14.0 | 65 | Citations (PDF) |
| 606 | A rheological and spectroscopic study on the kinetics of self‐healing in a single‐component diels–alder copolymer and its underlying chemical reaction | 2.3 | 94 | Citations (PDF) |
| 607 | Tunable synthesis of poly(ethylene imine)–gold nanoparticle clusters | 3.4 | 50 | Citations (PDF) |
| 608 | Novel Insights Into Appropriate Encapsulation Methods for Bioactive Compounds Into Polymers: A Study With Peptides and HDAC Inhibitors | 4.0 | 11 | Citations (PDF) |
| 609 | “Polymeromics”: Mass spectrometry based strategies in polymer science toward complete sequencing approaches: A review | 5.7 | 64 | Citations (PDF) |
| 610 | Poly(ethylene oxide) (PEO)-based ABC triblock terpolymers – synthetic complexity vs. application benefits | 3.9 | 53 | Citations (PDF) |
| 611 | Beyond click chemistry – supramolecular interactions of 1,2,3-triazoles | 37.7 | 772 | Citations (PDF) |
| 612 | Phenalenone-type phytoalexins mediate resistance of banana plants (
Musa
spp.) to the burrowing nematode
Radopholus similis | 7.5 | 147 | Citations (PDF) |
| 613 | Light-harvesting of polymerizable 4-hydroxy-1,3-thiazole monomers by energy transfer toward photoactive Os(ii) metal complexes in linear polymers | 3.9 | 22 | Citations (PDF) |
| 614 | Metal‐Free Cycloaddition of Internal Alkynes and Multifunctional Azides Under Solvent‐Free Conditions | 2.4 | 29 | Citations (PDF) |
| 615 | One pot synthesis of higher order quasi-block copolymer librariesviasequential RAFT polymerization in an automated synthesizer | 3.9 | 80 | Citations (PDF) |
| 616 | Polymers with n-type nitroxide side groups: Synthesis and electrochemical characterization | 5.9 | 16 | Citations (PDF) |
| 617 | Blocked isocyanates: an efficient tool for post-polymerization modification of polymers | 3.9 | 19 | Citations (PDF) |
| 618 | Amine end-functionalized poly(2-ethyl-2-oxazoline) as promising coating material for antifouling applications | 5.5 | 76 | Citations (PDF) |
| 619 | Zwitterionic poly(2-oxazoline)s as promising candidates for blood contacting applications | 3.9 | 37 | Citations (PDF) |
| 620 | Toward pH-Responsive Coating Materials—High-Throughput Study of (Meth)acrylic Copolymers | 4.5 | 8 | Citations (PDF) |
| 621 | PolyTCAQ in organic batteries: enhanced capacity at constant cell potential using two-electron-redox-reactions | 9.3 | 39 | Citations (PDF) |
| 622 | Towards single-pass plasma sintering: temperature influence of atmospheric pressure plasma sintering of silver nanoparticle ink | 5.1 | 37 | Citations (PDF) |
| 623 | Self-healing mechanism of metallopolymers investigated by QM/MM simulations and Raman spectroscopy | 2.7 | 57 | Citations (PDF) |
| 624 | Semi-automated multi-dimensional characterization of synthetic copolymers | 5.9 | 2 | Citations (PDF) |
| 625 | Plasmonic nanoparticle clusters with tunable plasmonic resonances in the visible spectral region | 5.1 | 14 | Citations (PDF) |
| 626 | How the Calorimetric Properties of a Crystalline Copolymer Correlate to Its Surface Nanostructures | 5.0 | 9 | Citations (PDF) |
| 627 | Physicochemical Analysis of Ruthenium(II) Sensitizers of 1,2,3-Triazole-Derived Mesoionic Carbene and Cyclometalating Ligands | 4.6 | 86 | Citations (PDF) |
| 628 | Solution self-assembly of poly(ethylene oxide)-block-poly(furfuryl glycidyl ether)-block-poly(allyl glycidyl ether) based triblock terpolymers: a field-flow fractionation study | 3.9 | 20 | Citations (PDF) |
| 629 | Simulation and prediction of the thermal sintering behavior for a silver nanoparticle ink based on experimental input | 5.1 | 21 | Citations (PDF) |
| 630 | Synthesis of Thermoresponsive Glycopolymers Combining RAFT Polymerization, Thiol‐Ene Reaction, and Subsequent Immobilization onto Solid Supports | 2.4 | 5 | Citations (PDF) |
| 631 | HIV-1 Vpu mediated downregulation of CD155 requires alanine residues 10, 14 and 18 of the transmembrane domain | 2.3 | 37 | Citations (PDF) |
| 632 | Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies | 2.6 | 51 | Citations (PDF) |
| 633 | Matrix Supported Poly(2-oxazoline)-Based Hydrogels for DNA Catch and Release | 5.1 | 32 | Citations (PDF) |
| 634 | Small but Powerful: Co-Assembly of Polyether-Based Triblock Terpolymers into Sub-30 nm Micelles and Synergistic Effects on Cellular Interactions | 5.1 | 26 | Citations (PDF) |
| 635 | Chip-on-foil devices for DNA analysis based on inkjet-printed silver electrodes | 5.1 | 24 | Citations (PDF) |
| 636 | Modification of the Active Layer/PEDOT:PSS Interface by Solvent Additives Resulting in Improvement of the Performance of Organic Solar Cells | 8.0 | 17 | Citations (PDF) |
| 637 | Mass spectrometric imaging of synthetic polymers | 5.7 | 38 | Citations (PDF) |
| 638 | Polymers Based on Stable Phenoxyl Radicals for the Use in Organic Radical Batteries | 4.1 | 51 | Citations (PDF) |
| 639 | Linear Poly(ethylene imine)-Based Hydrogels for Effective Binding and Release of DNA | 5.1 | 31 | Citations (PDF) |
| 640 | Characterization of cationic polymers by asymmetric flow field-flow fractionation and multi-angle light scattering—A comparison with traditional techniques | 3.7 | 31 | Citations (PDF) |
| 641 | A Heteroleptic Bis(tridentate) Ruthenium(II) Platform Featuring an Anionic 1,2,3-Triazolate-Based Ligand for Application in the Dye-Sensitized Solar Cell | 4.6 | 67 | Citations (PDF) |
| 642 | Precise synthesis of undecenyl poly(ethylene oxide) macromonomers as heterofunctional building blocks for the synthesis of linear diblocks or of branched materials | 5.9 | 9 | Citations (PDF) |
| 643 | Free‐Standing Carbon Nanofibrous Films Prepared by a Fast Microwave‐Assisted Synthesis Process | 17.0 | 19 | Citations (PDF) |
| 644 | Verification of Selected Key Assumptions for the Analysis of Depth‐Sensing Indentation Data | 4.1 | 1 | Citations (PDF) |
| 645 | Pd‐Catalyzed Ring Assembly by Vinylation and Intramolecular Heck Coupling: A Versatile Strategy Towards Functionalized Azadibenzocyclooctynes | 3.4 | 10 | Citations (PDF) |
| 646 | One‐Component Intrinsic Self‐Healing Coatings Based on Reversible Crosslinking by Diels–Alder Cycloadditions | 2.4 | 143 | Citations (PDF) |
| 647 | Comparison of ESI, APCI and MALDI for the (tandem) mass analysis of poly(2-ethyl-2-oxazoline)s with various end-groups | 5.9 | 16 | Citations (PDF) |
| 648 | Poly(2-oxazoline) Hydrogels for Controlled Fibroblast Attachment | 5.1 | 91 | Citations (PDF) |
| 649 | Star-Shaped Drug Carriers for Doxorubicin with POEGMA and POEtOxMA Brush-like Shells: A Structural, Physical, and Biological Comparison | 5.1 | 44 | Citations (PDF) |
| 650 | Parallel High-Throughput Screening of Polymer Vectors for Nonviral Gene Delivery: Evaluation of Structure–Property Relationships of Transfection | 4.5 | 35 | Citations (PDF) |
| 651 | Easy Access to Amphiphilic Heterografted Poly(2-oxazoline) Comb Copolymers | 5.0 | 44 | Citations (PDF) |
| 652 | ZnIIBisterpyridine Metallopolymers: Improved Processability by the Introduction of Polymeric Side Chains | 2.4 | 13 | Citations (PDF) |
| 653 | Controlled radical polymerization of styrene‐based models of the active site of the [FeFe]‐hydrogenase | 2.3 | 22 | Citations (PDF) |
| 654 | Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications | 2.5 | 83 | Citations (PDF) |
| 655 | Self‐Healing Materials via Reversible Crosslinking of Poly(ethylene oxide)‐Block‐Poly(furfuryl glycidyl ether) (PEO‐b‐PFGE) Block Copolymer Films | 17.0 | 117 | Citations (PDF) |
| 656 | A systematic investigation of the effect of side chain branching on the glass transition temperature and mechanical properties of aliphatic (co-)poly(2-oxazoline)s | 4.1 | 27 | Citations (PDF) |
| 657 | Blends of ethylene–octene copolymers with different chain architectures – Morphology, thermal and mechanical behavior | 4.1 | 36 | Citations (PDF) |
| 658 | All inkjet-printed piezoelectric polymer actuators: Characterization and applications for micropumps in lab-on-a-chip systems | 2.6 | 99 | Citations (PDF) |
| 659 | Cyclometalated Ruthenium(II) Complexes Featuring Tridentate Click‐Derived Ligands for Dye‐Sensitized Solar Cell Applications | 3.4 | 37 | Citations (PDF) |
| 660 | Deeper Understanding of Biological Tissue: Quantitative Correlation of MALDI-TOF and Raman Imaging | 6.5 | 58 | Citations (PDF) |
| 661 | Star-Brush-Shaped Macromolecules: Peculiar Properties in Dilute Solution | 5.0 | 12 | Citations (PDF) |
| 662 | Poly(2-oxazoline) functionalized surfaces: from modification to application | 37.7 | 146 | Citations (PDF) |
| 663 | Combinatorial Screening of Inkjet Printed Ternary Blends for Organic Photovoltaics: Absorption Behavior and Morphology | 4.5 | 7 | Citations (PDF) |
| 664 | A toolbox of differently sized and labeled PMMA nanoparticles for cellular uptake investigations | 2.6 | 48 | Citations (PDF) |
| 665 | Orthogonal self-assembly of stimuli-responsive supramolecular polymers using one-step prepared heterotelechelic building blocks | 3.9 | 37 | Citations (PDF) |
| 666 | Formation of dynamic metallo-copolymers by inkjet printing: towards white-emitting materials | 5.1 | 44 | Citations (PDF) |
| 667 | Opposites attract: influence of the molar mass of branched poly(ethylene imine) on biophysical characteristics of siRNA-based polyplexese | 4.4 | 35 | Citations (PDF) |
| 668 | A Homotelechelic bis‐terpyridine macroligand: One‐step synthesis and its metallo‐supramolecular self‐assembly | 2.3 | 17 | Citations (PDF) |
| 669 | Understanding and tuning the self-assembly of polyether-based triblock terpolymers in aqueous solution | 2.6 | 28 | Citations (PDF) |
| 670 | Resonance Raman Spectral Imaging of Intracellular Uptake of β‐Carotene Loaded Poly(D,L‐lactide‐co‐glycolide) Nanoparticles | 1.9 | 20 | Citations (PDF) |
| 671 | Biocompatible Multishell Architecture for Iron Oxide Nanoparticles | 4.0 | 5 | Citations (PDF) |
| 672 | Influenza A virus protein PB1-F2 from different strains shows distinct structural signatures | 2.0 | 15 | Citations (PDF) |
| 673 | Self‐Healing Polymer Coatings Based on Crosslinked Metallosupramolecular Copolymers | 24.5 | 353 | Citations (PDF) |
| 674 | In vitro hemocompatibility and cytotoxicity study of poly(2‐methyl‐2‐oxazoline) for biomedical applications | 2.3 | 71 | Citations (PDF) |
| 675 | Fluorescent monomers as building blocks for dye labeled polymers: synthesis and application in energy conversion, biolabeling and sensors | 37.7 | 230 | Citations (PDF) |
| 676 | Nitroxide-Mediated Polymerization of Styrenic Triarylamines and Chain-End Functionalization with a Ruthenium Complex: Toward Tailored Photoredox-Active Architectures | 5.0 | 27 | Citations (PDF) |
| 677 | pH degradable dendron-functionalized poly(2-ethyl-2-oxazoline) prepared by a cascade “double-click” reaction | 3.9 | 33 | Citations (PDF) |
| 678 | Systematic Investigation of a Novel Low‐Bandgap Terpolymer Library via Inkjet Printing: Influence of Ink Properties and Processing Conditions | 2.4 | 4 | Citations (PDF) |
| 679 | Synthesis of thermoresponsive glycopolymers via ATRP of N-isopropylacrylamide and N-allylacrylamide and subsequent thiol–ene reaction | 5.9 | 16 | Citations (PDF) |
| 680 | Inkjet printing of chemically tailored light-emitting polymers | 5.9 | 41 | Citations (PDF) |
| 681 | Reactive Inkjet Printing of Cathodes for Organic Radical Batteries | 22.5 | 73 | Citations (PDF) |
| 682 | Hierarchical, Guided Self-Assembly of Preselected Carbon Nanotubes for the Controlled Fabrication of CNT Structures by Electrooxidative Nanolithography | 3.6 | 15 | Citations (PDF) |
| 683 | Tuning the morphology of triblock terpoly(2-oxazoline)s containing a 2-phenyl-2-oxazoline block with varying fluorine content | 2.6 | 24 | Citations (PDF) |
| 684 | Photoinduced polyaddition of multifunctional azides and alkynes | 3.9 | 41 | Citations (PDF) |
| 685 | Amphiphilic star-shaped block copolymers as unimolecular drug delivery systems: investigations using a novel fungicide | 2.6 | 35 | Citations (PDF) |
| 686 | Amphiphilic supramolecular A(B)2A quasi-triblock copolymers | 3.9 | 10 | Citations (PDF) |
| 687 | Emitting electrode coatings with redox-switchable conductivity: incorporation of ruthenium(ii)-2,6-di(quinolin-8-yl)pyridine complexes into polythiophene by electropolymerization | 4.4 | 13 | Citations (PDF) |
| 688 | Self-healing metallopolymers based on cadmium bis(terpyridine) complex containing polymer networks | 3.9 | 137 | Citations (PDF) |
| 689 | HIV-1 p6 — a structured to flexible multifunctional membrane-interacting protein | 2.2 | 30 | Citations (PDF) |
| 690 | A Paradigm Change: Efficient Transfection of Human Leukemia Cells by Stimuli-Responsive Multicompartment Micelles | 15.3 | 67 | Citations (PDF) |
| 691 | Drugs as matrix to detect their own drug delivery system of PEG‐
b
‐PCL block copolymers in matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry | 1.4 | 5 | Citations (PDF) |
| 692 | Synthesis and Charge–Discharge Studies of Poly(ethynylphenyl)galvinoxyles and Their Use in Organic Radical Batteries with Aqueous Electrolytes | 2.4 | 32 | Citations (PDF) |
| 693 | Aqueous solution behavior of comb‐shaped poly(2‐ethyl‐2‐oxazoline) | 2.3 | 48 | Citations (PDF) |
| 694 | A strong cationic Brønsted acid, [H(OEt2)2][Al{OC(CF3)3}4], as an efficient initiator for the cationic ring-opening polymerization of 2-alkyl-2-oxazolines | 3.9 | 23 | Citations (PDF) |
| 695 | Fluorescence Study of Energy Transfer in PMMA Polymers with Pendant Oligo‐Phenylene‐Ethynylenes | 1.9 | 9 | Citations (PDF) |
| 696 | Triggered and self-healing systems using nanostructured materials | 5.5 | 14 | Citations (PDF) |
| 697 | Synthesis and Solution Properties of Double Hydrophilic Poly(ethylene oxide)-block-poly(2-ethyl-2-oxazoline) (PEO-b-PEtOx) Star Block Copolymers | 4.5 | 27 | Citations (PDF) |
| 698 | Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas | 2.5 | 52 | Citations (PDF) |
| 699 | Linear Metallopolymers from Ruthenium(II)‐2,6‐di(quinolin‐8‐yl)pyridine Complexes by Electropolymerization – Formation of Redox‐Stable and Emissive Films | 1.8 | 27 | Citations (PDF) |
| 700 | Cationic poly(2-oxazoline) hydrogels for reversible DNA binding | 2.6 | 56 | Citations (PDF) |
| 701 | Förster resonance energy transfer in poly(methyl methacrylates) copolymers bearing donor-acceptor 1,3-thiazole dyes | 2.3 | 6 | Citations (PDF) |
| 702 | ESI, APCI, and MALDI tandem mass spectrometry of poly(methyl acrylate)s: A comparison study for the structural characterization of polymers synthesized via CRP techniques and the software application to analyze MS/MS data | 2.3 | 24 | Citations (PDF) |
| 703 | Screening of Film‐Formation Qualities of Various Solvent Systems for π‐Conjugated Polymers Via Combinatorial Inkjet Printing | 2.4 | 9 | Citations (PDF) |
| 704 | Detailed characterization of poly(2‐ethyl‐2oxazoline)s by energy variable collision‐induced dissociation study | 1.4 | 14 | Citations (PDF) |
| 705 | Investigating the Motion of Diblock Copolymer Assemblies in Ionic Liquids by In Situ Electron Microscopy | 24.5 | 24 | Citations (PDF) |
| 706 | 4-Deoxyaurone Formation in Bidens ferulifolia (Jacq.) DC | 2.3 | 24 | Citations (PDF) |
| 707 | Strongly Phase-Segregating Block Copolymers with Sub-20 nm Features | 5.0 | 27 | Citations (PDF) |
| 708 | Just One Position-Independent Lysine Residue Can Direct MelanA into Proteasomal Degradation following N-Terminal Fusion of Ubiquitin | 2.3 | 11 | Citations (PDF) |
| 709 | Combinatorial Screening of Polymer/Fullerene Blends for Solar Cells by Inkjet Printing | 0.1 | 1 | Citations (PDF) |
| 710 | Chelating Fluorene Dyes as Mono- and Ditopic 2-(1H-1,2,3-Triazol-4-yl)pyridine Ligands and Their Corresponding Ruthenium(II) Complexes | 2.3 | 6 | Citations (PDF) |
| 711 | Fast high-throughput screening of temoporfin-loaded liposomal formulations prepared by ethanol injection method | 3.6 | 34 | Citations (PDF) |
| 712 | Water Uptake of Poly(2-N-Alkyl-2-Oxazoline)s: Temperature-Dependent Fourier Transform Infrared (FT-IR) Spectroscopy and Two-Dimensional Correlation Analysis (2DCOS) | 2.0 | 15 | Citations (PDF) |
| 713 | Molar mass, chemical-composition, and functionality-type distributions of poly(2-oxazoline)s revealed by a variety of separation techniques | 3.7 | 8 | Citations (PDF) |
| 714 | Printed conductive features for DNA chip applications prepared on PET without sintering | 4.4 | 5 | Citations (PDF) |
| 715 | Fluorometric sensor based on bisterpyridine metallopolymer: detection of cyanide and phosphates in water | 3.1 | 56 | Citations (PDF) |
| 716 | Self-assembly of chiral block and gradient copolymers | 2.6 | 35 | Citations (PDF) |
| 717 | Localized atmospheric plasma sintering of inkjet printed silver nanoparticles | 7.3 | 84 | Citations (PDF) |
| 718 | Fluorometric, water-based sensors for the detection of nerve gas G mimics DMMP, DCP and DCNP | 3.4 | 54 | Citations (PDF) |
| 719 | Light-triggered NO release from a nanofibrous non-woven | 7.3 | 26 | Citations (PDF) |
| 720 | Application of Matrix-Assisted Laser Desorption/Ionization Mass Spectrometric Imaging for Photolithographic Structuring | 6.5 | 13 | Citations (PDF) |
| 721 | Extended-Chain Induced Bulk Morphologies Occur at Surfaces of Thin Co-Oligomer Films | 5.0 | 16 | Citations (PDF) |
| 722 | Thermoresponsive Poly(2-oxazoline) Block Copolymers Exhibiting Two Cloud Points: Complex Multistep Assembly Behavior | 5.0 | 104 | Citations (PDF) |
| 723 | Perinuclear localization of the HIV-1 regulatory protein Vpr is important for induction of G2-arrest | 2.3 | 14 | Citations (PDF) |
| 724 | “Clicking” on/with polymers: a rapidly expanding field for the straightforward preparation of novel macromolecular architectures | 37.7 | 347 | Citations (PDF) |
| 725 | Blue emitting side-chain pendant 4-hydroxy-1,3-thiazoles in polystyrenes synthesized by RAFT polymerization | 5.9 | 16 | Citations (PDF) |
| 726 | Fluorescence quenching in Zn2+-bis-terpyridine coordination polymers: a single molecule study | 7.3 | 28 | Citations (PDF) |
| 727 | Polyelectrolyte Complexes of DNA and Linear PEI: Formation, Composition and Properties | 3.6 | 80 | Citations (PDF) |
| 728 | Syntheses, Characterization, and Antitumor Activities of Platinum(II) and Palladium(II) Complexes with Sugar‐Conjugated Triazole Ligands | 2.2 | 37 | Citations (PDF) |
| 729 | Macromonomers as Well‐Defined Building Blocks in the Synthesis of Hybrid Octafunctional Star‐Shaped Poly(ethylene oxide)s | 2.4 | 10 | Citations (PDF) |
| 730 | Star‐Shaped Block Copolymers by Copper‐Catalyzed Azide‐Alkyne Cycloaddition for Potential Drug Delivery Applications | 2.4 | 15 | Citations (PDF) |
| 731 | Poly(2‐oxazoline) Hydrogel Monoliths via Thiol‐ene Coupling | 4.1 | 84 | Citations (PDF) |
| 732 | Preparation, Cellular Internalization, and Biocompatibility of Highly Fluorescent PMMA Nanoparticles | 4.1 | 34 | Citations (PDF) |
| 733 | Side‐Chain Modification and “Grafting Onto” via Olefin Cross‐Metathesis | 4.1 | 21 | Citations (PDF) |
| 734 | Toward the design of LPEI containing block copolymers: Improved synthesis protocol, selective hydrolysis, and detailed characterization | 2.3 | 15 | Citations (PDF) |
| 735 | Homo‐ and diblock copolymers of poly(furfuryl glycidyl ether) by living anionic polymerization: Toward reversibly core‐crosslinked micelles | 2.3 | 47 | Citations (PDF) |
| 736 | Unexpected radical polymerization behavior of oligo(2-ethyl-2-oxazoline) macromonomers | 3.9 | 22 | Citations (PDF) |
| 737 | Particulate transepithelial drug carriers: barriers and functional polymers | 4.4 | 16 | Citations (PDF) |
| 738 | Bis(tridentate) Ruthenium–Terpyridine Complexes Featuring Microsecond Excited-State Lifetimes | 15.0 | 233 | Citations (PDF) |
| 739 | Photogenerated avenues in macromolecules containing Re(i), Ru(ii), Os(ii), and Ir(iii) metal complexes of pyridine-based ligands | 37.7 | 237 | Citations (PDF) |
| 740 | A Sugar Decorated Macromolecular Bottle Brush by Carbohydrate-Initiated Cationic Ring-Opening Polymerization | 5.0 | 37 | Citations (PDF) |
| 741 | UV-induced crosslinking of the polybutadiene domains in lamellar polystyrene-block-polybutadiene block copolymer films – An in-depth study | 4.1 | 10 | Citations (PDF) |
| 742 | Block Copolymers of Poly(2-oxazoline)s and Poly(meth)acrylates: A Crossover between Cationic Ring-Opening Polymerization (CROP) and Reversible Addition–Fragmentation Chain Transfer (RAFT) | 5.0 | 55 | Citations (PDF) |
| 743 | Thermo-Induced Self-Assembly of Responsive Poly(DMAEMA-b-DEGMA) Block Copolymers into Multi- and Unilamellar Vesicles | 5.0 | 136 | Citations (PDF) |
| 744 | 2-Isopropenyl-2-oxazoline: A Versatile Monomer for Functionalization of Polymers Obtained via RAFT | 5.0 | 73 | Citations (PDF) |
| 745 | Polymerization of free secondary amine bearing monomers by RAFT polymerization and other controlled radical techniques | 2.3 | 80 | Citations (PDF) |
| 746 | Nanoprecipitation of poly(methyl methacrylate)‐based nanoparticles: Effect of the molar mass and polymer behavior | 2.3 | 38 | Citations (PDF) |
| 747 | Bis‐hydrophilic and functional triblock terpolymers based on polyethers: Synthesis and self‐assembly in solution | 2.3 | 15 | Citations (PDF) |
| 748 | Synthesis and characterization of polymethacrylates containing conjugated oligo(phenylene ethynylene)s as side chains | 2.3 | 15 | Citations (PDF) |
| 749 | New Design Concepts for the Fabrication of Nanometric Gap Structures: Electrochemical Oxidation of OTS Mono‐ and Bilayer Structures | 11.5 | 5 | Citations (PDF) |
| 750 | Poly(2‐ethyl‐2‐oxazoline) as Alternative for the Stealth Polymer Poly(ethylene glycol): Comparison of in vitro Cytotoxicity and Hemocompatibility | 4.0 | 302 | Citations (PDF) |
| 751 | Uptake of Well‐Defined, Highly Glycosylated, Pentafluorostyrene‐Based Polymers and Nanoparticles by Human Hepatocellular Carcinoma Cells | 4.0 | 16 | Citations (PDF) |
| 752 | Synthesis and Characterization of Poly(methyl methacrylate) Backbone Polymers Containing Side‐Chain Pendant Ruthenium(II) Bis‐Terpyridine Complexes With an Elongated Conjugated System | 2.4 | 18 | Citations (PDF) |
| 753 | Hydrodynamic and Molecular Study of Poly{4‐[4‐(hexyloxy)phenyl]ethynylphenyl methacrylate} in Dilute Solutions and Conformational Peculiarities of Brush‐Like Macromolecules | 2.4 | 12 | Citations (PDF) |
| 754 | Induced Charge Effect by Co(II) Complexation on the Conformation of a Copolymer Containing a Bidentate 2‐(1,2,3‐Triazol‐4‐yl)pyridine Chelating Unit | 2.4 | 11 | Citations (PDF) |
| 755 | Perfluorophenyl‐Terpyridine Ruthenium Complex as Monomer for Fast, Efficient, and Mild Metallopolymerizations | 4.1 | 23 | Citations (PDF) |
| 756 | Inkjet Printing of Zinc(II) Bis‐2,2′:6′,2″‐Terpyridine Metallopolymers: Printability and Film‐Forming Studies by a Combinatorial Thin‐Film Library Approach | 4.1 | 18 | Citations (PDF) |
| 757 | Metallo‐Supramolecular Materials Based on Amine‐Grafting Onto Polypentafluorostyrene | 4.1 | 24 | Citations (PDF) |
| 758 | Ruthenium(II) Metallo‐Supramolecular Polymers of Click‐Derived Tridentate Ditopic Ligands | 4.1 | 30 | Citations (PDF) |
| 759 | Poly(ϵ‐caprolactone) Decorated With One Room‐Temperature Red‐Emitting Ruthenium(II) Complex: Synthesis, Characterization, Thermal and Optical Properties | 4.1 | 11 | Citations (PDF) |
| 760 | Synthesis of a glycopolymeric PtII carrier and its induction of apoptosis in resistant cancer cells | 3.4 | 24 | Citations (PDF) |
| 761 | Amphiphilic oligoether-based ionic liquids as functional materials for thermoresponsive ion gels with tunable properties via aqueous gelation | 2.6 | 28 | Citations (PDF) |
| 762 | Probe‐Based Electro‐Oxidative Lithography of OTS SAMs Deposited onto Transparent ITO Substrates | 17.0 | 23 | Citations (PDF) |
| 763 | Plasma and Microwave Flash Sintering of a Tailored Silver Nanoparticle Ink, Yielding 60% Bulk Conductivity on Cost‐Effective Polymer Foils | 24.5 | 133 | Citations (PDF) |
| 764 | The Radiative Decay Rates Tune the Emissive Properties of Ruthenium(II) Polypyridyl Complexes: A Computational Study | 3.0 | 21 | Citations (PDF) |
| 765 | Ruthenium(II) Photosensitizers of Tridentate Click‐Derived Cyclometalating Ligands: A Joint Experimental and Computational Study | 3.4 | 69 | Citations (PDF) |
| 766 | Branched and linear poly(ethylene imine)-based conjugates: synthetic modification, characterization, and application | 37.7 | 318 | Citations (PDF) |
| 767 | Roll‐to‐Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non‐Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds | 24.5 | 205 | Citations (PDF) |
| 768 | Recent developments in the detailed characterization of polymers by multidimensional chromatography | 3.7 | 78 | Citations (PDF) |
| 769 | Temperature responsive bio-compatible polymers based on poly(ethylene oxide) and poly(2-oxazoline)s | 25.1 | 509 | Citations (PDF) |
| 770 | New Approach to [FeFe]‐Hydrogenase Models Using Aromatic Thioketones | 1.8 | 20 | Citations (PDF) |
| 771 | Determination of the relative ligand‐binding strengths in heteroleptic IrIII complexes by ESI‐Q‐TOF tandem mass spectrometry | 1.7 | 7 | Citations (PDF) |
| 772 | Tandem mass spectrometry of poly(ethylene imine)s by electrospray ionization (ESI) and matrix‐assisted laser desorption/ionization (MALDI) | 1.7 | 29 | Citations (PDF) |
| 773 | Thermoresponsive Poly(2‐oxazine)s | 4.1 | 118 | Citations (PDF) |
| 774 | Synthesis of miktoarm star copolymer Ru(II) complexes by click-to-chelate approach | 2.5 | 20 | Citations (PDF) |
| 775 | Incorporation of Polymerizable Osmium(II) Bis-terpyridine Complexes into PMMA Backbones | 4.3 | 11 | Citations (PDF) |
| 776 | The molecular mechanism of dual emission in terpyridine transition metal complexes—ultrafast investigations of photoinduced dynamics | 2.7 | 61 | Citations (PDF) |
| 777 | Micellar dye shuttle between water and an ionic liquid | 2.6 | 27 | Citations (PDF) |
| 778 | Functionalized, Biocompatible Coating for Superparamagnetic Nanoparticles by Controlled Polymerization of a Thioglycosidic Monomer | 5.1 | 60 | Citations (PDF) |
| 779 | Water uptake of poly(2-N-alkyl-2-oxazoline)s: influence of crystallinity and hydrogen-bonding on the mechanical properties | 7.3 | 31 | Citations (PDF) |
| 780 | Fabrication of ring structures by anodization lithography on self-assembled OTS monolayers | 7.3 | 8 | Citations (PDF) |
| 781 | “One Cell−One Well”: A New Approach to Inkjet Printing Single Cell Microarrays | 4.5 | 73 | Citations (PDF) |
| 782 | Responsive Glyco-poly(2-oxazoline)s: Synthesis, Cloud Point Tuning, and Lectin Binding | 5.1 | 50 | Citations (PDF) |
| 783 | Efficient Cationic Ring-Opening Polymerization of Diverse Cyclic Imino Ethers: Unexpected Copolymerization Behavior | 5.0 | 43 | Citations (PDF) |
| 784 | Poly(2-cyclopropyl-2-oxazoline): From Rate Acceleration by Cyclopropyl to Thermoresponsive Properties | 5.0 | 82 | Citations (PDF) |
| 785 | Direct Observation of Temperature-Dependent Excited-State Equilibrium in Dinuclear Ruthenium Terpyridine Complexes Bearing Electron-Poor Bridging Ligands | 3.1 | 27 | Citations (PDF) |
| 786 | Inkjet printing and low temperature sintering of CuO and CdS as functional electronic layers and Schottky diodes | 7.3 | 59 | Citations (PDF) |
| 787 | Poly(2-oxazoline) glycopolymers with tunable LCST behavior | 3.9 | 72 | Citations (PDF) |
| 788 | Advances in the field of π-conjugated 2,2′:6′,2″-terpyridines | 37.7 | 478 | Citations (PDF) |
| 789 | Three-Fold Metal-Free Efficient (“Click”) Reactions onto a Multifunctional Poly(2-oxazoline) Designer Scaffold | 5.0 | 99 | Citations (PDF) |
| 790 | Main-chain chiral copoly(2-oxazoline)s | 3.9 | 20 | Citations (PDF) |
| 791 | Nanoprecipitation and nanoformulation of polymers: from history to powerful possibilities beyond poly(lactic acid) | 2.6 | 342 | Citations (PDF) |
| 792 | Examination and optimization of the self-assembly of biocompatible, polymeric nanoparticles by high-throughput nanoprecipitation | 2.6 | 32 | Citations (PDF) |
| 793 | Selective partial hydrolysis of amphiphilic copoly(2-oxazoline)s as basis for temperature and pH responsive micelles | 3.9 | 47 | Citations (PDF) |
| 794 | Multicompartment micelles from blends of terpolymers | 3.9 | 29 | Citations (PDF) |
| 795 | Synthesis and Resonance Energy Transfer Study on a Random Terpolymer Containing a 2-(Pyridine-2-yl)thiazole Donor-Type Ligand and a Luminescent [Ru(bpy)2(2-(triazol-4-yl)pyridine)]2+ Chromophore | 5.0 | 50 | Citations (PDF) |
| 796 | One-pot synthesis of cyclopentadienyl endcapped poly(2-ethyl-2-oxazoline) and subsequent ambient temperature Diels–Alder conjugations | 3.4 | 31 | Citations (PDF) |
| 797 | Conformation parameters of linear macromolecules from velocity sedimentation and other hydrodynamic methods | 3.5 | 53 | Citations (PDF) |
| 798 | Combinatorial Optimization of Multiple MALDI Matrices on a Single Tissue Sample Using Inkjet Printing | 4.5 | 13 | Citations (PDF) |
| 799 | Ink Jet Printed Silver Lines Formed in Microchannels Exhibit Lower Resistance Than Their Unstructured Counterparts | 0.4 | 4 | Citations (PDF) |
| 800 | Functional soft materials from metallopolymers and metallosupramolecular polymers | 33.4 | 986 | Citations (PDF) |
| 801 | Ion channel activity of HIV-1 Vpu is dispensable for counteraction of CD317 | 2.3 | 37 | Citations (PDF) |
| 802 | Antiviral activity of the proteasome inhibitor VL-01 against influenza A viruses | 3.8 | 24 | Citations (PDF) |
| 803 | Characterization of poly(2-oxazoline) homo- and copolymers by liquid chromatography at critical conditions | 3.7 | 33 | Citations (PDF) |
| 804 | Fast, ligand- and solvent-free copper-catalyzed click reactions in a ball mill | 3.4 | 148 | Citations (PDF) |
| 805 | Self‐Assembly of 3,6‐Bis(4‐triazolyl)pyridazine Ligands with Copper(I) and Silver(I) Ions: Time‐Dependant 2D‐NOESY and Ultracentrifuge Measurements | 3.0 | 20 | Citations (PDF) |
| 806 | Platinum–Acetylide Polymers with Higher Dimensionality for Organic Solar Cells | 3.0 | 49 | Citations (PDF) |
| 807 | Metal‐Free 1,5‐Regioselective Azide–Alkyne [3+2]‐Cycloaddition | 3.0 | 43 | Citations (PDF) |
| 808 | Catalytic Applications of Terpyridines and their Transition Metal Complexes | 3.6 | 152 | Citations (PDF) |
| 809 | Alkyl β-d-cellulosides: non-reducing cellulose mimics | 4.4 | 3 | Citations (PDF) |
| 810 | The Host-Pathogen interaction of human cyclophilin A and HIV-1 Vpr requires specific N-terminal and novel C-terminal domains | 1.8 | 17 | Citations (PDF) |
| 811 | Highly conserved serine residue 40 in HIV-1 p6 regulates capsid processing and virus core assembly | 3.5 | 24 | Citations (PDF) |
| 812 | Preparation of polyurethane elastomers (PUEs) in a high‐throughput workflow | 2.3 | 7 | Citations (PDF) |
| 813 | Automated batch emulsion copolymerization of styrene and butyl acrylate | 2.3 | 3 | Citations (PDF) |
| 814 | Syntheses of 3‐arm and 4‐arm star‐branched polystyrene Ru(II) complexes by the click‐to‐chelate approach | 2.3 | 31 | Citations (PDF) |
| 815 | Synthesis, characterization, and micellization studies of coil‐rod‐coil and ABA ruthenium(II) terpyridine assemblies with π‐conjugated electron acceptor systems | 2.3 | 13 | Citations (PDF) |
| 816 | Main‐chain chiral poly(2‐oxazoline)s: Influence of alkyl side‐chain on secondary structure formation in solution | 2.3 | 16 | Citations (PDF) |
| 817 | Upper critical solution temperature switchable micelles based on polystyrene‐block‐poly(methyl acrylate) block copolymers | 2.3 | 22 | Citations (PDF) |
| 818 | Analysis of different synthetic homopolymers by the use of a new calculation software for tandem mass spectra | 1.4 | 14 | Citations (PDF) |
| 819 | Application of matrix‐assisted laser desorption/ionization mass spectrometric imaging to monitor surface changes of UV‐irradiated poly(styrene) films | 1.4 | 13 | Citations (PDF) |
| 820 | Adhesion of Preosteoblasts and Fibroblasts onto Poly(pentafluorostyrene)‐Based Glycopolymeric Films and their Biocompatibility | 4.0 | 35 | Citations (PDF) |
| 821 | Organ Weaving: Woven Threads and Sheets As a Step Towards a New Strategy for Artificial Organ Development | 4.0 | 34 | Citations (PDF) |
| 822 | Blue‐Emitting Polymers Based on 4‐Hydroxythiazoles Incorporated in a Methacrylate Backbone | 2.4 | 30 | Citations (PDF) |
| 823 | Linear Polyethyleneimine: Optimized Synthesis and Characterization – On the Way to “Pharmagrade” Batches | 2.4 | 92 | Citations (PDF) |
| 824 | Homogeneous Sulfation of Xylan from Different Sources | 4.1 | 51 | Citations (PDF) |
| 825 | Poly(cyclic imino ether)s Beyond 2‐Substituted‐2‐oxazolines | 4.1 | 55 | Citations (PDF) |
| 826 | A Green Approach for the Synthesis and Thiol‐ene Modification of Alkene Functio1489lized Poly(2‐oxazoline)s | 4.1 | 52 | Citations (PDF) |
| 827 | Strategies for Post‐Synthesis Alignment and Immobilization of Carbon Nanotubes | 24.5 | 40 | Citations (PDF) |
| 828 | The Marriage of Terpyridines and Inorganic Nanoparticles: Synthetic Aspects, Characterization Techniques, and Potential Applications | 24.5 | 83 | Citations (PDF) |
| 829 | Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing | 22.5 | 101 | Citations (PDF) |
| 830 | Formation of Iron Oxide Particles by Reduction with Hydrazine | 1.9 | 2 | Citations (PDF) |
| 831 | A Heteroleptic Bis(tridentate) Ruthenium(II) Complex of a Click‐Derived Abnormal Carbene Pincer Ligand with Potential for Photosensitzer Application | 3.4 | 123 | Citations (PDF) |
| 832 | Film formation properties of inkjet printed poly(phenylene-ethynylene)-poly(phenylene-vinylene)s | 1.9 | 28 | Citations (PDF) |
| 833 | Thermal Properties of Oligo(2‐ethyl‐2‐oxazoline) Containing Comb and Graft Copolymers and their Aqueous Solutions | 0.7 | 30 | Citations (PDF) |
| 834 | Alternative Sintering Approaches for Fast Sintering of Inkjet Printed Nanoparticles for R2R Applications | 0.1 | 1 | Citations (PDF) |
| 835 | Recent developments in the utilization of green solvents in polymer chemistry | 37.7 | 211 | Citations (PDF) |
| 836 | Control of the Aggregation Properties of Tris(maltohexaose)‐Linked Porphyrins with an Alkyl Chain | 2.3 | 31 | Citations (PDF) |
| 837 | π‐Conjugated 2,2′:6′,2″‐Bis(terpyridines): Systematical Tuning of the Optical Properties by Variation of the Linkage between the Terpyridines and the π‐Conjugated System | 2.3 | 35 | Citations (PDF) |
| 838 | Contact Angle Analysis During the Electro‐oxidation of Self‐Assembled Monolayers Formed by n‐Octadecyltrichlorosilane | 17.0 | 8 | Citations (PDF) |
| 839 | Sugar‐Selective Enrichment of a D‐Glucose‐Substituted Ruthenium Bipyridyl Complex Inside HepG2 Cancer Cells | 2.6 | 45 | Citations (PDF) |
| 840 | Mitochondrial Mode of Action of a Thymidine‐Based Cisplatin Analogue Breaks Resistance in Cancer Cells | 3.4 | 12 | Citations (PDF) |
| 841 | Anwendung von Poly(ethylenglycol) beim Wirkstoff‐Transport: Vorteile, Nachteile und Alternativen | 1.4 | 119 | Citations (PDF) |
| 842 | Poly(ethylene glycol) in Drug Delivery: Pros and Cons as Well as Potential Alternatives | 14.4 | 3,294 | Citations (PDF) |
| 843 | Systematic MALDI‐TOF CID Investigation on Different Substituted mPEG 2000 | 2.4 | 23 | Citations (PDF) |
| 844 | Velocity Sedimentation and Intrinsic Viscosity Analysis of Polystyrene Standards with a Wide Range of Molar Masses | 2.4 | 21 | Citations (PDF) |
| 845 | ESI‐MS & MS/MS Analysis of Poly(2‐oxazoline)s with Different Side Groups | 2.4 | 17 | Citations (PDF) |
| 846 | Thermal, Mechanical, and Surface Properties of Poly(2‐N‐alkyl‐2‐oxazoline)s | 2.4 | 58 | Citations (PDF) |
| 847 | Self‐Assembly Behavior of Bis(terpyridine) and Metallo‐bis(terpyridine) Pluronics in Dilute Aqueous Solutions | 2.4 | 24 | Citations (PDF) |
| 848 | Responsive Hybrid Polymeric/Metallic Nanoparticles for Catalytic Applications | 4.1 | 76 | Citations (PDF) |
| 849 | RAFT Polymerization Meets Coordination Chemistry: Synthesis of a Polymer‐Based Iridium(III) Emitter | 4.1 | 19 | Citations (PDF) |
| 850 | Supramolecular Star‐Shaped Poly(ethylene glycol) Based on a [2 × 2] Grid‐Like Metal Complex | 4.1 | 11 | Citations (PDF) |
| 851 | The Effect of Hofmeister Salts on the LCST Transition of Poly(2‐oxazoline)s with Varying Hydrophilicity | 4.1 | 158 | Citations (PDF) |
| 852 | π‐Conjugated Donor and Donor–Acceptor Metallo‐Polymers | 4.1 | 40 | Citations (PDF) |
| 853 | Dual Emission from Highly Conjugated 2,2′:6′:2″‐Terpyridine Complexes—A Potential Route to White Emitters | 4.1 | 50 | Citations (PDF) |
| 854 | Complexation of Terpyridine‐Containing Dextrans: Toward Water‐Soluble Supramolecular Structures | 4.1 | 10 | Citations (PDF) |
| 855 | Multifunctional Poly(2‐oxazoline) Nanoparticles for Biological Applications | 4.1 | 71 | Citations (PDF) |
| 856 | A Practical Approach to the Development of Inkjet Printable Functional Ionogels—Bendable, Foldable, Transparent, and Conductive Electrode Materials | 4.1 | 23 | Citations (PDF) |
| 857 | Labeled Nanoparticles Based on Pharmaceutical EUDRAGIT® S 100 Polymers | 4.1 | 14 | Citations (PDF) |
| 858 | Controlled “Grafting-from” of poly[styrene-co-maleic anhydride] onto polydienes using nitroxide chemistry | 5.9 | 39 | Citations (PDF) |
| 859 | New terpyridine macroligands as potential synthons for supramolecular assemblies | 5.9 | 22 | Citations (PDF) |
| 860 | Synthesis and MALDI-TOF-MS of PS-PMA and PMA-PS block copolymers | 5.9 | 18 | Citations (PDF) |
| 861 | Effect of shifting of aromatic rings on charge carrier mobility and photovoltaic response of anthracene and thiophene-containing MEH-PPE-PPVs | 6.1 | 26 | Citations (PDF) |
| 862 | Cellulose molecular properties in 1-alkyl-3-methylimidazolium-based ionic liquid mixtures with pyridine | 12.2 | 12 | Citations (PDF) |
| 863 | Kinetic study of the polymerization of aromatic polyurethane prepolymers by high‐throughput experimentation | 2.3 | 21 | Citations (PDF) |
| 864 | Metal‐free synthesis of responsive polymers: Cloud point tuning by controlled “click” reaction | 2.3 | 71 | Citations (PDF) |
| 865 | Multiple micellar morphologies from tri‐ and tetrablock copoly(2‐oxazoline)s in binary water–ethanol mixtures | 2.3 | 17 | Citations (PDF) |
| 866 | Characterization of poly(methyl methacrylate) nanoparticles prepared by nanoprecipitation using analytical ultracentrifugation, dynamic light scattering, and scanning electron microscopy | 2.3 | 58 | Citations (PDF) |
| 867 | Block length determination of the block copolymer mPEG‐b‐PS using MALDI‐TOF MS/MS | 2.3 | 27 | Citations (PDF) |
| 868 | Design of new amphiphilic triblock copoly(2‐oxazoline)s containing a fluorinated segment | 2.3 | 26 | Citations (PDF) |
| 869 | Characterization of different poly(2‐oxazoline) block copolymers by MALDI‐TOF MS/MS and ESI‐Q‐TOF MS/MS | 2.3 | 33 | Citations (PDF) |
| 870 | On the use of N‐dicyclopropylmethyl aspartyl‐glycine synthone for backbone amide protection | 2.0 | 8 | Citations (PDF) |
| 871 | The Proapoptotic Influenza A Virus Protein PB1-F2 Forms a Nonselective Ion Channel | 2.3 | 59 | Citations (PDF) |
| 872 | A Flow Cytometry-Based FRET Assay to Identify and Analyse Protein-Protein Interactions in Living Cells | 2.3 | 152 | Citations (PDF) |
| 873 | Synthesis and crystal structures of multifunctional tosylates as basis for star-shaped poly(2-ethyl-2-oxazoline)s | 1.9 | 41 | Citations (PDF) |
| 874 | Temperature Induced Solubility Transitions of Various Poly(2-oxazoline)s in Ethanol-Water Solvent Mixtures | 4.5 | 73 | Citations (PDF) |
| 875 | A Fluorescent Thermometer Based on a Pyrene-Labeled Thermoresponsive Polymer | 3.0 | 69 | Citations (PDF) |
| 876 | New Ditopic Ligands Containing 2,2′:6′,2′′-Terpyridine and a Rigid U-/S-Shaped Terpyridine | 1.4 | 0 | Citations (PDF) |
| 877 | Depicting the Spatial Distribution of Proteins in Human Tumor Tissue Combining SELDI and MALDI Imaging and Immunohistochemistry | 1.5 | 15 | Citations (PDF) |
| 878 | The Clinically Approved Proteasome Inhibitor PS-341 Efficiently Blocks Influenza A Virus and Vesicular Stomatitis Virus Propagation by Establishing an Antiviral State | 3.6 | 47 | Citations (PDF) |
| 879 | Anion Complexation by Triazolium “Ligands”: Mono- and Bis-tridentate Complexes of Sulfate | 4.8 | 98 | Citations (PDF) |
| 880 | Secondary structure formation of main-chain chiral poly(2-oxazoline)s in solution | 2.6 | 36 | Citations (PDF) |
| 881 | Thermoreversible ionogels with tunable properties via aqueous gelation of an amphiphilic quaternary ammonium oligoether-based ionic liquid | 7.3 | 42 | Citations (PDF) |
| 882 | Microwave-assisted synthesis of imidazolium ionenes and their application as humidity absorbers | 7.3 | 18 | Citations (PDF) |
| 883 | PMMA based soluble polymeric temperature sensors based on UCST transition and solvatochromic dyes | 3.9 | 85 | Citations (PDF) |
| 884 | Clickable initiators, monomers and polymers in controlled radical polymerizations – a prospective combination in polymer science | 3.9 | 233 | Citations (PDF) |
| 885 | Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials | 7.3 | 700 | Citations (PDF) |
| 886 | N-Heterocyclic Donor- and Acceptor-Type Ligands Based on 2-(1H-[1,2,3]Triazol-4-yl)pyridines and Their Ruthenium(II) Complexes | 3.5 | 60 | Citations (PDF) |
| 887 | Ordered Chiral Structures in the Crystals of Main-Chain Chiral Poly(2-oxazoline)s | 5.0 | 26 | Citations (PDF) |
| 888 | Excited-State Planarization as Free Barrierless Motion in a π-Conjugated Terpyridine | 3.1 | 40 | Citations (PDF) |
| 889 | Rational Design of an Amorphous Poly(2-oxazoline) with a Low Glass-Transition Temperature: Monomer Synthesis, Copolymerization, and Properties | 5.0 | 59 | Citations (PDF) |
| 890 | A Concept to Tailor Electron Delocalization: Applying QTAIM Analysis to Phenyl−Terpyridine Compounds | 2.5 | 42 | Citations (PDF) |
| 891 | Microwave-Assisted Fabrication of Carbon Nanotube AFM Tips | 8.7 | 34 | Citations (PDF) |
| 892 | Chemical modification of self-assembled silane based monolayers by surface reactions | 37.7 | 380 | Citations (PDF) |
| 893 | Unexpected metal-mediated oxidation of hydroxymethyl groups to coordinated carboxylate groups by bis-cyclometalated iridium(iii) centers | 2.4 | 17 | Citations (PDF) |
| 894 | Dual Responsive Methacrylic Acid and Oligo(2-ethyl-2-oxazoline) Containing Graft Copolymers | 5.0 | 103 | Citations (PDF) |
| 895 | Dual hydrophilic polymers based on (meth)acrylic acid and poly(ethylene glycol) – synthesis and water uptake behavior | 3.9 | 24 | Citations (PDF) |
| 896 | Linear Poly(ethylene imine)s by Acidic Hydrolysis of Poly(2-oxazoline)s: Kinetic Screening, Thermal Properties, and Temperature-Induced Solubility Transitions | 5.0 | 104 | Citations (PDF) |
| 897 | Orthogonal Functionalization of Silicon Substrates Using Self-Assembled Monolayers | 3.6 | 27 | Citations (PDF) |
| 898 | Room temperature preparation of conductive silver features using spin-coating and inkjet printing | 7.3 | 106 | Citations (PDF) |
| 899 | Synthesis and Characterization of New Self-Assembled Metallo-Polymers Containing Electron-Withdrawing and Electron-Donating Bis(terpyridine) Zinc(II) Moieties | 5.0 | 89 | Citations (PDF) |
| 900 | Discovering new block terpolymer micellar morphologies | 3.4 | 43 | Citations (PDF) |
| 901 | Reactive inkjet printing of calcium alginate hydrogel porogens—a new strategy to open-pore structured matrices with controlled geometry | 2.6 | 61 | Citations (PDF) |
| 902 | Fabrication of PEDOT–OTS-patterned ITO substrates | 7.3 | 11 | Citations (PDF) |
| 903 | Metallo-supramolecular diblock copolymers based on heteroleptic cobalt(iii) and nickel(ii) bis-terpyridine complexes | 3.4 | 54 | Citations (PDF) |
| 904 | Aqueous gelation of ionic liquids: reverse thermoresponsive ion gels | 3.4 | 52 | Citations (PDF) |
| 905 | 2-[1-(1-Naphthyl)-1H-1,2,3-triazol-4-yl]pyridine | 0.2 | 3 | Citations (PDF) |
| 906 | Local Probe Oxidation of Self-Assembled Monolayers on Hydrogen-Terminated Silicon | 15.3 | 34 | Citations (PDF) |
| 907 | Azido- and Ethynyl-Substituted
2,2′:6′,2′′-Terpyridines as
Suitable Substrates for Click Reactions | 2.3 | 8 | Citations (PDF) |
| 908 | ‘Clicking’ on the nanoscale: 1,3-dipolar cycloaddition of terminal acetylenes on azide functionalized, nanometric surface templates with nanometer resolution | 2.6 | 9 | Citations (PDF) |
| 909 | The Selective Heating of Iron Nanoparticles in a Single‐Mode Microwave for the Patterned Growths of Carbon Nanofibers and Nanotubes | 17.0 | 35 | Citations (PDF) |
| 910 | Sample Target Substrates with Reduced Spot Size for MALDI‐TOF Mass Spectrometry Based on Patterned Self‐Assembled Monolayers | 17.0 | 16 | Citations (PDF) |
| 911 | On the Synthesis of Carbon Nanofibers and Nanotubes by Microwave Irradiation: Parameters, Catalysts, and Substrates | 17.0 | 21 | Citations (PDF) |
| 912 | Microwave Flash Sintering of Inkjet‐Printed Silver Tracks on Polymer Substrates | 24.5 | 212 | Citations (PDF) |
| 913 | Lokale, spitzeninduzierte Oxidation von selbstorganisierten Monoschichten: Schablonen für die Herstellung funktionaler Nanostrukturen | 1.4 | 6 | Citations (PDF) |
| 914 | Klick‐Chemie jenseits von metallkatalysierten Cycloadditionen | 1.4 | 114 | Citations (PDF) |
| 915 | Prospects of Metal Complexes Peripherally Substituted with Sugars in Biomedicinal Applications | 3.4 | 90 | Citations (PDF) |
| 916 | Synthesis, Characterization, and Electro‐Optical Properties of ZnII Complexes with π‐Conjugated Terpyridine Ligands | 1.9 | 51 | Citations (PDF) |
| 917 | Spectroscopic Investigation of the Ultrafast Photoinduced Dynamics in π‐Conjugated Terpyridines | 1.9 | 75 | Citations (PDF) |
| 918 | InIII and GaIII Complexes of Sugar‐Substituted Tripodal Trisalicylidene Imines: The First 68Ga‐Labelled Sugar Derivative | 1.8 | 5 | Citations (PDF) |
| 919 | Synthesis of Rigid π‐Conjugated Mono‐, Bis‐, Tris‐, and Tetrakis(terpyridine)s: Influence of the Degree and Pattern of Substitution on the Photophysical Properties | 2.3 | 66 | Citations (PDF) |
| 920 | Droplet Tailoring Using Evaporative Inkjet Printing | 2.4 | 47 | Citations (PDF) |
| 921 | The Spreading of Inkjet‐Printed Droplets with Varying Polymer Molar Mass on a Dry Solid Substrate | 2.4 | 57 | Citations (PDF) |
| 922 | Synthesis and Characterization of Oxetane‐Functionalized Phosphorescent Ir(III)‐Complexes | 2.4 | 24 | Citations (PDF) |
| 923 | Monodisperse, Temperature‐Sensitive Microgels Crosslinked by SiOSi Bonds | 4.1 | 12 | Citations (PDF) |
| 924 | Tandem mass spectrometry of synthetic polymers | 1.7 | 80 | Citations (PDF) |
| 925 | Soluble Polymeric Dual Sensor for Temperature and pH Value | 1.4 | 31 | Citations (PDF) |
| 926 | Local Probe Oxidation of Self‐Assembled Monolayers: Templates for the Assembly of Functional Nanostructures | 14.4 | 50 | Citations (PDF) |
| 927 | Click Chemistry beyond Metal‐Catalyzed Cycloaddition | 14.4 | 840 | Citations (PDF) |
| 928 | Soluble Polymeric Dual Sensor for Temperature and pH Value | 14.4 | 150 | Citations (PDF) |
| 929 | Characterization of different poly(2‐ethyl‐2‐oxazoline)s via matrix‐assisted laser desorption/ionization time‐of‐flight tandem mass spectrometry | 1.4 | 42 | Citations (PDF) |
| 930 | Anthracene‐ and thiophene‐containing MEH‐PPE‐PPVs: Synthesis and study of the effect of the aromatic ring position on the photophysical and electrochemical properties | 2.3 | 26 | Citations (PDF) |
| 931 | Unexpected reactivity for the RAFT copolymerization of oligo(ethylene glycol) methacrylates | 2.3 | 50 | Citations (PDF) |
| 932 | Solution prepolymerization as a new route for preparing aliphatic polyurethane prepolymers using high‐throughput experimentation | 2.3 | 11 | Citations (PDF) |
| 933 | Alternating terpyridine‐endfunctionalized copolymers of styrene and diphenylethylene via anionic polymerization techniques: A detailed characterization study | 2.3 | 28 | Citations (PDF) |
| 934 | Synthesis and characterization of a series of diverse poly(2‐oxazoline)s | 2.3 | 71 | Citations (PDF) |
| 935 | Self‐assembly of π‐conjugated bis(terpyridine) ligands with zinc(II) ions: New metallosupramolecular materials for optoelectronic applications | 2.3 | 83 | Citations (PDF) |
| 936 | Synthesis and properties of gradient copolymers based on 2‐phenyl‐2‐oxazoline and 2‐nonyl‐2‐oxazoline | 2.3 | 21 | Citations (PDF) |
| 937 | Are o‐nitrobenzyl (meth)acrylate monomers polymerizable by controlled‐radical polymerization? | 2.3 | 51 | Citations (PDF) |
| 938 | Solution structure of the Equine Infectious Anemia Virus p9 protein: a rationalization of its different ALIX binding requirements compared to the analogous HIV-p6 protein | 1.8 | 5 | Citations (PDF) |
| 939 | Matrix‐free UV‐laser desorption/ionization (LDI) mass spectrometric imaging at the single‐cell level: distribution of secondary metabolites of Arabidopsis thaliana and Hypericum species | 6.2 | 197 | Citations (PDF) |
| 940 | Surface micellization of poly(2-oxazoline)s based copolymers containing a crystallizable block | 9.9 | 7 | Citations (PDF) |
| 941 | Photophysical properties of PPP and PPV derivatives bearing polystyrene or polycaprolactone as side groups | 5.9 | 10 | Citations (PDF) |
| 942 | Click chemistry meets polymerization: Controlled incorporation of an easily accessible ruthenium(II) complex into a PMMA backbone via RAFT copolymerization | 5.9 | 21 | Citations (PDF) |
| 943 | Exogenous HIV-1 Vpr disrupts IFN-α response by plasmacytoid dendritic cells (pDCs) and subsequent pDC/NK interplay | 2.4 | 18 | Citations (PDF) |
| 944 | 2‐(1 H‐1,2,3‐Triazol‐4‐yl)‐Pyridine Ligands as Alternatives to 2,2′‐Bipyridines in Ruthenium(II) Complexes | 3.0 | 91 | Citations (PDF) |
| 945 | Molecular solutions of cellulose in mixtures of ionic liquids with pyridine | 0.7 | 16 | Citations (PDF) |
| 946 | Preparation of Methacrylate End-Functionalized Poly(2-ethyl-2-oxazoline) Macromonomers | 2.1 | 62 | Citations (PDF) |
| 947 | A Versatile Approach to Unimolecular Water-Soluble Carriers: ATRP of PEGMA with Hydrophobic Star-Shaped Polymeric Core Molecules as an Alternative for PEGylation | 5.0 | 86 | Citations (PDF) |
| 948 | Hydrodynamic Analysis of Well-Defined Flexible Linear Macromolecules of Low Molar Mass | 5.0 | 18 | Citations (PDF) |
| 949 | Supramolecular Assembly via Noncovalent Metal Coordination Chemistry: Synthesis, Characterization, and Elastic Properties | 5.0 | 14 | Citations (PDF) |
| 950 | Inhibition of the proteasome influences murine and human dendritic cell development in vitro and in vivo | 1.1 | 18 | Citations (PDF) |
| 951 | Synthetic polymeric nanoparticles by nanoprecipitation | 7.3 | 224 | Citations (PDF) |
| 952 | Extended dissolution studies of cellulose in imidazolium based ionic liquids | 9.1 | 432 | Citations (PDF) |
| 953 | Expression, purification, and activities of full-length and truncated versions of the integral membrane protein Vpu from HIV-1 | 5.9 | 75 | Citations (PDF) |
| 954 | Inkjet printing of proteins | 2.6 | 174 | Citations (PDF) |
| 955 | One-step inkjet printing of conductive silver tracks on polymer substrates | 2.6 | 206 | Citations (PDF) |
| 956 | Argon plasma sintering of inkjet printed silver tracks on polymer substrates | 7.3 | 252 | Citations (PDF) |
| 957 | Connecting micelles by metallo-supramolecular interactions: towards stimuli responsive hierarchical materials | 2.6 | 58 | Citations (PDF) |
| 958 | Tailor Made Side‐Chain Functionalized Macromolecules by Combination of Controlled Radical Polymerization and Click Chemistry | 0.7 | 21 | Citations (PDF) |
| 959 | Reactive inkjet printing of polyurethanes | 7.3 | 54 | Citations (PDF) |
| 960 | Self-assembly of double hydrophobic block copolymers in water–ethanol mixtures: from micelles to thermoresponsive micellar gels | 3.4 | 65 | Citations (PDF) |
| 961 | Screening the Synthesis of 2-Substituted-2-oxazolines | 4.6 | 65 | Citations (PDF) |
| 962 | 2,2′:6′,2″-Terpyridine meets 2,6-bis(1H-1,2,3-triazol-4-yl)pyridine: tuning the electro-optical properties of ruthenium(ii) complexes | 3.0 | 107 | Citations (PDF) |
| 963 | Fast Surface Modification by Microwave Assisted Click Reactions on Silicon Substrates | 3.6 | 38 | Citations (PDF) |
| 964 | Phenyl-1H-[1,2,3]triazoles as New Cyclometalating Ligands for Iridium(III) Complexes | 2.9 | 144 | Citations (PDF) |
| 965 | A schizophrenic gradient copolymer: switching and reversing poly(2-oxazoline) micelles based on UCST and subtle solvent changes | 2.6 | 79 | Citations (PDF) |
| 966 | Polymeric nanocontainers with high loading capacity of hydrophobic drugs | 2.6 | 48 | Citations (PDF) |
| 967 | Advanced supramolecular initiator for nitroxide-mediated polymerizations containing both metal-ion coordination and hydrogen-bonding sites | 3.4 | 57 | Citations (PDF) |
| 968 | Correlating the mechanical and surface properties with the composition of triblock copoly(2-oxazoline)s | 7.3 | 14 | Citations (PDF) |
| 969 | Self-organization of rod–coil tri- and tetra-arm star metallo-supramolecular block copolymers in selective solvents | 2.6 | 29 | Citations (PDF) |
| 970 | Rhenium and 99m-technetium complexes of monosaccharide based tripodal triamines as potential radio imaging agents | 3.0 | 10 | Citations (PDF) |
| 971 | Tuning the morphologies of amphiphilic metallo-supramolecular triblock terpolymers: from spherical micelles to switchable vesicles | 2.6 | 74 | Citations (PDF) |
| 972 | Amphiphilic brushes from metallo-supramolecular block copolymers | 2.6 | 21 | Citations (PDF) |
| 973 | Multicompartment micelles from a metallo-supramolecular tetrablock quatercopolymer | 3.4 | 31 | Citations (PDF) |
| 974 | Lower Critical Solution Temperature Behavior of Comb and Graft Shaped Poly[oligo(2-ethyl-2-oxazoline)methacrylate]s | 5.0 | 138 | Citations (PDF) |
| 975 | Clicking Pentafluorostyrene Copolymers: Synthesis, Nanoprecipitation, and Glycosylation | 5.0 | 222 | Citations (PDF) |
| 976 | A Study of the Kinetic Hydrate Inhibitor Performance and Seawater Biodegradability of a Series of Poly(2-alkyl-2-oxazoline)s | 5.2 | 101 | Citations (PDF) |
| 977 | Temperature effect on the magneto-rheological behavior of magnetite particles dispersed in an ionic liquid | 0.3 | 20 | Citations (PDF) |
| 978 | Silicon‐Based and Fluorinated Polymeric Surfactants for Nitroxide Mediated Dispersion Polymerization in Supercritical Carbon Dioxide | 0.7 | 19 | Citations (PDF) |
| 979 | Hydrodynamic properties of cyclodextrin molecules in dilute solutions | 2.0 | 43 | Citations (PDF) |
| 980 | Modulating the activity of the channel-forming segment of Vpr protein from HIV-1 | 2.0 | 8 | Citations (PDF) |
| 981 | Protocol for Automated Kinetic Investigation/Optimization of the RAFT Polymerization of Various Monomers | 1.3 | 41 | Citations (PDF) |
| 982 | Encapsulation and release by star‐shaped block copolymers as unimolecular nanocontainers | 2.3 | 31 | Citations (PDF) |
| 983 | Self‐assembly of metallo‐supramolecular block copolymers in thin films | 2.3 | 28 | Citations (PDF) |
| 984 | Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline | 2.3 | 60 | Citations (PDF) |
| 985 | Amphiphilic gradient copolymers containing fluorinated 2‐phenyl‐2‐oxazolines: Microwave‐assisted one‐pot synthesis and self‐assembly in water | 2.3 | 38 | Citations (PDF) |
| 986 | Libraries of methacrylic acid and oligo(ethylene glycol) methacrylate copolymers with LCST behavior | 2.3 | 250 | Citations (PDF) |
| 987 | Synthesis of full length PB1‐F2 influenza A virus proteins from ‘Spanish flu’ and ‘bird flu’ | 2.0 | 9 | Citations (PDF) |
| 988 | Acetyl Halide Initiator Screening for the Cationic Ring‐Opening Polymerization of 2‐Ethyl‐2‐Oxazoline | 2.4 | 52 | Citations (PDF) |
| 989 | Poly(dimethylsiloxane)‐Substituted 2,2′:6,2″‐Terpyridines: Synthesis and Characterization of New Amphiphilic Supramolecular Diblock Copolymers | 2.4 | 19 | Citations (PDF) |
| 990 | Clickable Poly(2‐Oxazoline)s as Versatile Building Blocks | 2.4 | 112 | Citations (PDF) |
| 991 | MALDI‐TOF MS Coupled with Collision‐Induced Dissociation (CID) Measurements of Poly(methyl methacrylate) | 4.1 | 30 | Citations (PDF) |
| 992 | Thermosensitive and Switchable Terpyridine‐Functionalized Metallo‐Supramolecular Poly(N‐isopropylacrylamide) | 4.1 | 60 | Citations (PDF) |
| 993 | Advancing the Solid State Properties of Metallo‐Supramolecular Materials: Poly(ε‐caprolactone) Modified π‐Conjugated Bis(terpyridine)s and their Zn(II) Based Metallo‐Polymers | 4.1 | 39 | Citations (PDF) |
| 994 | Copolymers Containing Phosphorescent Iridium(III) Complexes Obtained by Free and Controlled Radical Polymerization Techniques | 4.1 | 19 | Citations (PDF) |
| 995 | Synthesis, Microwave‐Assisted Polymerization, and Polymer Properties of Fluorinated 2‐Phenyl‐2‐oxazolines: A Systematic Study | 3.4 | 39 | Citations (PDF) |
| 996 | “Invisible” Silver Tracks Produced by Combining Hot‐Embossing and Inkjet Printing | 17.0 | 71 | Citations (PDF) |
| 997 | Advanced Device Architecture for Highly Efficient Organic Light‐Emitting Diodes with an Orange‐Emitting Crosslinkable Iridium(III) Complex | 24.5 | 145 | Citations (PDF) |
| 998 | Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates | 24.5 | 497 | Citations (PDF) |
| 999 | Chemical Nanostructures of Multifunctional Self‐Assembled Monolayers | 24.5 | 11 | Citations (PDF) |
| 1000 | Photo‐embossed Surface Relief Structures with an Increased Aspect Ratios by Addition of a Reversible Addition‐Fragmentation Chain Transfer Agent | 24.5 | 13 | Citations (PDF) |
| 1001 | The proapoptotic influenza A virus protein PB1-F2 regulates viral polymerase activity by interaction with the PB1 protein | 1.6 | 136 | Citations (PDF) |
| 1002 | Synthesis and characterization of poly(2-ethyl 2-oxazoline)-conjugates with proteins and drugs: Suitable alternatives to PEG-conjugates? | 11.0 | 224 | Citations (PDF) |
| 1003 | Synthesis of Poly(2-ethyl-2-oxazoline)-b-poly(styrene) Copolymers via a Dual Initiator Route Combining Cationic Ring-Opening Polymerization and Atom Transfer Radical Polymerization | 5.0 | 63 | Citations (PDF) |
| 1004 | Inkjet-printed silver tracks: low temperature curing and thermal stability investigation | 7.3 | 292 | Citations (PDF) |
| 1005 | Inkjet printing as a deposition and patterning tool for polymers and inorganic particles | 2.6 | 748 | Citations (PDF) |
| 1006 | Influence of different branched alkyl side chains on the properties of imidazolium-based ionic liquids | 7.3 | 127 | Citations (PDF) |
| 1007 | Solvent Responsive Micelles Based on Block and Gradient Copoly(2-oxazoline)s | 5.0 | 79 | Citations (PDF) |
| 1008 | Controlled thermoreversible transfer of poly(oxazoline) micelles between an ionic liquid and water | 3.4 | 50 | Citations (PDF) |
| 1009 | The preferential deposition of silica micro-particles at the boundary of inkjet printed droplets | 2.6 | 65 | Citations (PDF) |
| 1010 | Tuning the LCST of poly(2-oxazoline)s by varying composition and molecular weight: alternatives to poly(N-isopropylacrylamide)? | 3.4 | 382 | Citations (PDF) |
| 1011 | Post-modification of poly(pentafluorostyrene): a versatile “click” method to create well-defined multifunctional graft copolymers | 3.4 | 85 | Citations (PDF) |
| 1012 | Tuning block copolymer micelles by metal–ligand interactions | 2.6 | 42 | Citations (PDF) |
| 1013 | Reversible Supramolecular Functionalization of Surfaces: Terpyridine Ligands as Versatile Building Blocks for Noncovalent Architectures | 3.6 | 54 | Citations (PDF) |
| 1014 | Combination of Different Chemical Surface Reactions for the Fabrication of Chemically Versatile Building Blocks onto Silicon Surfaces | 3.6 | 23 | Citations (PDF) |
| 1015 | Tuning solution polymer properties by binary water–ethanolsolvent mixtures | 2.6 | 119 | Citations (PDF) |
| 1016 | Libraries of Statistical Hydroxypropyl Acrylate Containing Copolymers with LCST Properties Prepared by NMP | 5.0 | 116 | Citations (PDF) |
| 1017 | Synthesis and Micellization of Coil−Rod−Coil Ruthenium(II) Terpyridine Assemblies | 5.0 | 31 | Citations (PDF) |
| 1018 | Zinc(II) Bisterpyridine Complexes: The Influence of the Cation on the π-Conjugation between Terpyridine and the Lateral Phenyl Substituent | 3.1 | 42 | Citations (PDF) |
| 1019 | Supramolecular Self-Assembled Ni(II), Fe(II), and Co(II) ABA Triblock Copolymers | 5.0 | 61 | Citations (PDF) |
| 1020 | Synthesis and microwave assisted polymerization of fluorinated 2-phenyl-2-oxazolines: the fastest 2-oxazoline monomer to date | 3.4 | 34 | Citations (PDF) |
| 1021 | Effect of Side Chain Length Variation on the Optical Properties of PPE-PPV Hybrid Polymers | 6.7 | 59 | Citations (PDF) |
| 1022 | Chemical surface reactions by click chemistry: coumarin dye modification of 11-bromoundecyltrichlorosilane monolayers | 2.6 | 50 | Citations (PDF) |
| 1023 | Human Immunodeficiency Virus (HIV)-1 Viral Protein R Suppresses Transcriptional Activity of Peroxisome Proliferator-Activated Receptor γ and Inhibits Adipocyte Differentiation: Implications for HIV-Associated Lipodystrophy | 2.5 | 80 | Citations (PDF) |
| 1024 | Anthracene‐ and Thiophene‐Containing Poly(p‐arylene‐ethynylene)/poly(p‐arylene‐vinylene)s: Towards Optimized Structures for Photovoltaic Applications | 0.7 | 9 | Citations (PDF) |
| 1025 | Ruthenium(II) Ions triggered direct supramolecular polymerization of bis-terpyridine poly(ethylene glycol): New Insights on synthesis and optimization | 3.1 | 4 | Citations (PDF) |
| 1026 | Structural Characterization and Oligomerization of PB1-F2, a Proapoptotic Influenza A Virus Protein | 2.2 | 61 | Citations (PDF) |
| 1027 | Capillary Zone Electrophoresis of Iridium(III) and Ruthenium(II) Polypyridyl Complexes in Non‐Aqueous Solvents | 2.1 | 1 | Citations (PDF) |
| 1028 | Role of cyclophilin A in HIV replication | 1.1 | 7 | Citations (PDF) |
| 1029 | Large-scale local probe oxidation of OTS monolayers | 2.6 | 14 | Citations (PDF) |
| 1030 | High aspect ratio surface relief structures by photoembossing | 3.0 | 29 | Citations (PDF) |
| 1031 | Capillary Zone Electrophoresis of Iridium(III) and Ruthenium(II) Polypyridyl Complexes in Non‐aqueous Solvents | 2.1 | 3 | Citations (PDF) |
| 1032 | Rigid π-Conjugated Mono-, Bis-, and Tris(2,2‘:6‘,2‘ ‘-terpyridines) | 4.8 | 76 | Citations (PDF) |
| 1033 | Functional ruthenium(ii)- and iridium(iii)-containing polymers for potential electro-optical applications | 37.7 | 201 | Citations (PDF) |
| 1034 | Water uptake of hydrophilic polymers determined by a thermal gravimetric analyzer with a controlled humidity chamber | 7.3 | 125 | Citations (PDF) |
| 1035 | Inkjet printing of polyurethane colloidal suspensions | 2.6 | 37 | Citations (PDF) |
| 1036 | Morphological transition during the thermal deprotection of poly(isobornyl acrylate)-b-poly(1-ethoxyethyl acrylate) | 2.6 | 13 | Citations (PDF) |
| 1037 | Evaporation induced micellization of poly(2-oxazoline) multiblock copolymers on surfaces | 2.6 | 16 | Citations (PDF) |
| 1038 | Geometric control of inkjet printed features using a gelating polymer | 7.3 | 111 | Citations (PDF) |
| 1039 | Polymer relief microstructures by inkjet etching | 7.3 | 22 | Citations (PDF) |
| 1040 | Elastic moduli for a diblock copoly(2-oxazoline) library obtained by high-throughput screening | 7.3 | 29 | Citations (PDF) |
| 1041 | Two-Dimensional Self-Assembly of Linear Poly(ethylene oxide)-b-poly(ε-caprolactone) Copolymers at the Air−Water Interface | 3.6 | 45 | Citations (PDF) |
| 1042 | Effect of Styryl Side Groups on the Photophysical Properties and Hole Mobility of PPE−PPV Systems | 5.0 | 29 | Citations (PDF) |
| 1043 | Statistical Approach To Understand MALDI-TOFMS Matrices: Discovery and Evaluation of New MALDI Matrices | 6.5 | 31 | Citations (PDF) |
| 1044 | Synthesis and Aqueous Micellization of Amphiphilic Tetrablock Ter- and Quarterpoly(2-oxazoline)s | 5.0 | 73 | Citations (PDF) |
| 1045 | Synthesis and Structure−Property Relationships of Random and Block Copolymers: A Direct Comparison for Copoly(2-oxazoline)s | 5.0 | 75 | Citations (PDF) |
| 1046 | Plant oil renewable resources as green alternatives in polymer science | 37.7 | 1,407 | Citations (PDF) |
| 1047 | Clicking polymers: a straightforward approach to novel macromolecular architectures | 37.7 | 758 | Citations (PDF) |
| 1048 | Tunable pH- and Temperature-Sensitive Copolymer Libraries by Reversible Addition−Fragmentation Chain Transfer Copolymerizations of Methacrylates | 5.0 | 326 | Citations (PDF) |
| 1049 | Application possibilities of preparative size exclusion chromatography to analytical problems in polymer science | 3.1 | 0 | Citations (PDF) |
| 1050 | Controlled Pattern Formation of Poly[2-methoxy-5-(2′-ethylhexyloxyl)–1,4-phenylenevinylene] (MEH–PPV) by Ink-Jet Printing | 17.0 | 78 | Citations (PDF) |
| 1051 | Inkjet Printing of Luminescent CdTe Nanocrystal–Polymer Composites | 17.0 | 179 | Citations (PDF) |
| 1052 | Magnetorheological Fluids Based on Ionic Liquids | 24.5 | 161 | Citations (PDF) |
| 1053 | Screening of EPDM Cure States Using Depth-Sensing Indentation | 2.4 | 9 | Citations (PDF) |
| 1054 | New Insights into Nickel(II), Iron(II), and Cobalt(II) Bis-Complex-Based Metallo-Supramolecular Polymers | 2.4 | 61 | Citations (PDF) |
| 1055 | Micellization of Poly(2‐oxazoline)‐Based Quasi‐Diblock Copolymers on Surfaces | 2.4 | 13 | Citations (PDF) |
| 1056 | New Polyester‐Based Terpyridine Macroligands and their Blue Iron(II) Complexes | 2.4 | 20 | Citations (PDF) |
| 1057 | Microwave-Assisted Homogeneous Polymerizations in Water-Soluble Ionic Liquids: An Alternative and Green Approach for Polymer Synthesis | 4.1 | 69 | Citations (PDF) |
| 1058 | Microwave-Assisted Polymer Synthesis: Recent Developments in a Rapidly Expanding Field of Research | 4.1 | 368 | Citations (PDF) |
| 1059 | Scale-Up of Microwave-Assisted Polymerizations in Continuous-Flow Mode: Cationic Ring-Opening Polymerization of 2-Ethyl-2-oxazoline | 4.1 | 63 | Citations (PDF) |
| 1060 | Cu(II)-Mediated ATRP of MMA by Using a Novel Tetradentate Amine Ligand with Oligo(ethylene glycol) Pendant Groups | 4.1 | 49 | Citations (PDF) |
| 1061 | Transport of Guest Molecules by Unimolecular Micelles Evidenced in Analytical Ultracentrifugation Experiments | 4.1 | 2 | Citations (PDF) |
| 1062 | Homogeneous Tritylation of Cellulose in 1-Butyl-3-methylimidazolium Chloride | 4.0 | 171 | Citations (PDF) |
| 1063 | 3-(2,2′:6′,2′′-Terpyridin-4′-yloxy)propyl toluene-4-sulfonate | 0.2 | 1 | Citations (PDF) |
| 1064 | Patterned Polymer Brushes Grafted from Bromine-Functionalized, Chemically Active Surface Templates | 11.5 | 34 | Citations (PDF) |
| 1065 | One-pot synthesis of 2-phenyl-2-oxazoline-containing quasi-diblock copoly(2-oxazoline)s under microwave irradiation | 2.3 | 79 | Citations (PDF) |
| 1066 | Synthesis, characterization, and cross‐linking of a library of statistical copolymers based on 2‐“soy alkyl”‐2‐oxazoline and 2‐ethyl‐2‐oxazoline | 2.3 | 22 | Citations (PDF) |
| 1067 | Poly(2-oxazolines) in biological and biomedical application contexts | 15.4 | 476 | Citations (PDF) |
| 1068 | New Preparation and Purification Methods for Metallo-Supramolecular Block Copolymers | 4.3 | 13 | Citations (PDF) |
| 1069 | Automated Scanning Probe Microscopy for Combinatorial Polymer Research | 0.1 | 0 | Citations (PDF) |
| 1070 | Combinatorial Compounding | 0.1 | 0 | Citations (PDF) |
| 1071 | Microwave-assisted cationic ring-opening polymerization of a soy-based 2-oxazoline monomer | 9.1 | 52 | Citations (PDF) |
| 1072 | Tuning the Hydrophilicity of Gold Nanoparticles Templated in Star Block Copolymers | 3.6 | 68 | Citations (PDF) |
| 1073 | Progress in the characterization of synthetic (supramolecular) polymers by analytical ultracentrifugation | 2.6 | 39 | Citations (PDF) |
| 1074 | Fast and “green” living cationic ring opening polymerization of 2-ethyl-2-oxazoline in ionic liquids under microwave irradiation | 3.4 | 92 | Citations (PDF) |
| 1075 | Predicting thermochemical parameters of oxygen-containing heterocycles using simple QSPR models | 2.2 | 7 | Citations (PDF) |
| 1076 | Selected successful approaches in combinatorial materials research | 2.6 | 12 | Citations (PDF) |
| 1077 | Light-emitting iridium(iii) and ruthenium(ii) polypyridyl complexes containing quadruple hydrogen-bonding moieties | 3.0 | 44 | Citations (PDF) |
| 1078 | Film thickness dependency of the emission colors of PPE–PPVs in inkjet printed libraries | 7.3 | 68 | Citations (PDF) |
| 1079 | Star-shaped block copolymer stabilized palladium nanoparticles for efficient catalytic Heck cross-coupling reactions | 7.3 | 68 | Citations (PDF) |
| 1080 | Synthesis of star-shaped poly(ε-caprolactone) via ‘click’ chemistry and ‘supramolecular click’ chemistry | 3.4 | 164 | Citations (PDF) |
| 1081 | Langmuir and Langmuir−Blodgett Films of Poly(ethylene oxide)-b-Poly(ε-caprolactone) Star-Shaped Block Copolymers | 3.6 | 48 | Citations (PDF) |
| 1082 | Supramolecular ABA Triblock Copolymers via a Polycondensation Approach: Synthesis, Characterization, and Micelle Formation | 5.0 | 62 | Citations (PDF) |
| 1083 | Solvent-Induced Morphological Transition in Core-Cross-Linked Block Copolymer Micelles | 15.0 | 119 | Citations (PDF) |
| 1084 | Microwave-Assisted Cationic Ring-Opening Polymerization of 2-Oxazolines: A Powerful Method for the Synthesis of Amphiphilic Triblock Copolymers | 5.0 | 134 | Citations (PDF) |
| 1085 | Optimizing Photo-Embossed Gratings: A Gradient Library Approach | 4.6 | 23 | Citations (PDF) |
| 1086 | The use of (metallo-)supramolecular initiators for living/controlled polymerization techniques | 37.7 | 104 | Citations (PDF) |
| 1087 | High-Throughput Screening and Optimization of Photoembossed Relief Structures | 4.6 | 23 | Citations (PDF) |
| 1088 | Study of the Influence of the Metal−Ligand Complex on the Size of Aqueous Metallo-Supramolecular Micelles | 5.0 | 40 | Citations (PDF) |
| 1089 | Microwave-Assisted Synthesis of 3,6-Di(pyridin-2-yl)pyridazines: Unexpected Ketone and Aldehyde Cycloadditions | 3.5 | 37 | Citations (PDF) |
| 1090 | First GPC results of terpyridine based chain extended supramolecular polymers: comparison with viscosity and analytical ultracentrifugation | 3.1 | 7 | Citations (PDF) |
| 1091 | Optimization of the nitroxide-mediated radical polymerization conditions for styrene andtert-butyl acrylate in an automated parallel synthesizer | 2.3 | 58 | Citations (PDF) |
| 1092 | High-throughput experimentation in synthetic polymer chemistry: From RAFT and anionic polymerizations to process development | 6.7 | 55 | Citations (PDF) |
| 1093 | Accelerated pressure synthesis and characterization of 2-oxazoline block copolymers | 4.1 | 46 | Citations (PDF) |
| 1094 | Buckle morphology of compressed inorganic thin layers on a polymer substrate | 1.9 | 68 | Citations (PDF) |
| 1095 | Microwave-assisted synthesis and micellization behavior of soy-based copoly(2-oxazoline)s | 2.1 | 24 | Citations (PDF) |
| 1096 | Two-step curing processes for coating application | 4.0 | 13 | Citations (PDF) |
| 1097 | Water-Soluble Ionic Liquids as Novel Stabilizers in Suspension Polymerization Reactions: Engineering Polymer Beads | 3.4 | 58 | Citations (PDF) |
| 1098 | Adhesion on the Nano- and Macroscale: Interaction between Copper and SAN/SMAh Copolymers | 1.9 | 5 | Citations (PDF) |
| 1099 | Characterization of Metallo-Supramolecular Block Copolymers by Analytical Ultracentrifugation | 2.4 | 14 | Citations (PDF) |
| 1100 | Terpyridine-Terminated Homo and Diblock Copolymer LEGO Units by Nitroxide-Mediated Radical Polymerization | 2.4 | 24 | Citations (PDF) |
| 1101 | Thermo-responsive Poly(methyl methacrylate)-block-poly(N-isopropylacrylamide) Block Copolymers Synthesized by RAFT Polymerization: Micellization and Gelation | 2.4 | 89 | Citations (PDF) |
| 1102 | Morphologies of Spin-Coated Films of a Library of Diblock Copoly(2-oxazoline)s and Their Correlation to the Corresponding Surface Energies | 4.1 | 25 | Citations (PDF) |
| 1103 | Scale-up of Microwave-Assisted Polymerizations in Batch Mode: The Cationic Ring-Opening Polymerization of 2-Ethyl-2-oxazoline | 4.1 | 47 | Citations (PDF) |
| 1104 | Force Spectroscopic Investigations During the Local Oxidation ofn-Octadecyltrichlorosilane Monolayers | 17.0 | 15 | Citations (PDF) |
| 1105 | Polymer-Relief Microstructures by Inkjet Etching | 24.5 | 66 | Citations (PDF) |
| 1106 | Ink-jet Printing and Microwave Sintering of Conductive Silver Tracks | 24.5 | 580 | Citations (PDF) |
| 1107 | A Green and Straightforward Synthesis of 4′-Substituted Terpyridines | 2.3 | 17 | Citations (PDF) |
| 1108 | High-throughput experimentation applied to atom transfer radical polymerization: Automated optimization of the copper catalysts removal from polymers | 3.1 | 7 | Citations (PDF) |
| 1109 | Ability of nitrones of various structures to control the radical polymerization of styrene mediated by in situ formed nitroxides | 4.1 | 40 | Citations (PDF) |
| 1110 | Oligonucleotide–protamine–albumin nanoparticles: preparation, physical properties, and intracellular distribution | 11.0 | 38 | Citations (PDF) |
| 1111 | Oligonucleotide-protamine-albumin nanoparticles: Protamine sulfate causes drastic size reduction | 11.0 | 34 | Citations (PDF) |
| 1112 | Oxidation Conditions for Octadecyl Trichlorosilane Monolayers on Silicon: A Detailed Atomic Force Microscopy Study of the Effects of Pulse Height and Duration on the Oxidation of the Monolayer and the Underlying Si Substrate | 17.0 | 66 | Citations (PDF) |
| 1113 | New Trends in the Use of Transition Metal-Ligand Complexes for Applications in Electroluminescent Devices | 24.5 | 722 | Citations (PDF) |
| 1114 | Nanoporous Thin Films from Self-Assembled Metallo- Supramolecular Block Copolymers | 24.5 | 97 | Citations (PDF) |
| 1115 | Photoembossing of Periodic Relief Structures Using Polymerization- Induced Diffusion: A Combinatorial Study | 24.5 | 66 | Citations (PDF) |
| 1116 | Iridium(III) Complexes with PEO and PS Polymer Macroligands and Light-Emitting Properties: Synthesis and Characterization | 2.4 | 34 | Citations (PDF) |
| 1117 | Ink-Jet Printing of Linear and Star Polymers | 4.1 | 52 | Citations (PDF) |
| 1118 | Ink-Jet Printing of Luminescent Ruthenium- and Iridium-Containing Polymers for Applications in Light-Emitting Devices | 4.1 | 79 | Citations (PDF) |
| 1119 | Ink-Jet Printing of Electron Donor/Acceptor Blends: Towards Bulk Heterojunction Solar Cells | 4.1 | 68 | Citations (PDF) |
| 1120 | Microwave Accelerated Polymerization of 2-Phenyl-2-oxazoline: Microwave or Temperature Effects? | 4.1 | 37 | Citations (PDF) |
| 1121 | PEO-b-PCL Block Copolymers: Synthesis, Detailed Characterization, and Selected Micellar Drug Encapsulation Behavior | 4.1 | 91 | Citations (PDF) |
| 1122 | Predicting the Morphology of Metallo-Supramolecular Block Copolymers with Bulky Counter Ions | 4.1 | 3 | Citations (PDF) |
| 1123 | Ethyl 5,5′′-dimethyl-2,2′;6′,2′′-terpyridine-4′-carboxylate | 0.2 | 0 | Citations (PDF) |
| 1124 | From Science to Innovation and From Data to Knowledge: eScience in the Dutch Polymer Institute's High-Throughput Experimentation Cluster | 1.3 | 11 | Citations (PDF) |
| 1125 | Reversible Addition-Fragmentation Chain Transfer Polymerization on different Synthesizer Platforms | 1.3 | 25 | Citations (PDF) |
| 1126 | Influenza A virus protein PB1-F2: synthesis and characterization of the biologically active full length protein and related peptides | 2.0 | 24 | Citations (PDF) |
| 1127 | Concentration effects in the cationic ring-opening polymerization of 2-ethyl-2-oxazoline inN,N-dimethylacetamide | 2.3 | 45 | Citations (PDF) |
| 1128 | Greenish-yellow-, yellow-, and orange-light-emitting iridium(III) polypyridyl complexes with poly(ɛ-caprolactone)-bipyridine macroligands | 2.3 | 55 | Citations (PDF) |
| 1129 | Systematic parallel investigation of RAFT polymerizations for eight different (meth)acrylates: A basis for the designed synthesis of block and random copolymers | 2.3 | 82 | Citations (PDF) |
| 1130 | Automated parallel anionic polymerizations: Enhancing the possibilities of a widely used technique in polymer synthesis | 2.3 | 42 | Citations (PDF) |
| 1131 | The LEGO toolbox: Supramolecular building blocks by nitroxide-mediated controlled radical polymerization | 2.3 | 47 | Citations (PDF) |
| 1132 | Fabrication via Electrochemical Oxidation of Self-Assembled Monolayers and Site-Selective Derivatization of Surface Templates | 11.5 | 33 | Citations (PDF) |
| 1133 | Solution Structure of the Human Immunodeficiency Virus Type 1 p6 Protein* | 2.2 | 59 | Citations (PDF) |
| 1134 | Combinatorial and high-throughput approaches in polymer science | 3.0 | 50 | Citations (PDF) |
| 1135 | Synthesis and characterization of 4- and 6-arm star-shaped poly(ε-caprolactone)s | 3.1 | 1 | Citations (PDF) |
| 1136 | Integration of MALDI-TOFMS as high-throughput screening tool into the workflow of combinatorial polymer research | 1.5 | 16 | Citations (PDF) |
| 1137 | High-throughput synthesis equipment applied to polymer research | 1.5 | 31 | Citations (PDF) |
| 1138 | The ubiquitin–proteasome system in HIV replication: potential targets for antiretroviral therapy | 3.9 | 39 | Citations (PDF) |
| 1139 | Microwave-assisted nitroxide-mediated polymerization of alkyl acrylates | 3.1 | 7 | Citations (PDF) |
| 1140 | Sector Spin Coating for Fast Preparation of Polymer Libraries | 4.6 | 14 | Citations (PDF) |
| 1141 | Sequential oxidation and functionalization of nanostructures: the site-specific controlled assembly of different sized particles on a surface | 7.3 | 17 | Citations (PDF) |
| 1142 | Microwave-assisted synthesis and properties of a series of poly(2-alkyl-2-oxazoline)s | 2.1 | 174 | Citations (PDF) |
| 1143 | High Molecular Weight Supramolecular Polymers Containing Both Terpyridine Metal Complexes and Ureidopyrimidinone Quadruple Hydrogen-Bonding Units in the Main Chain | 15.0 | 239 | Citations (PDF) |
| 1144 | Atom Transfer Radical Polymerization of 3-Ethyl-3-(acryloyloxy)methyloxetane | 5.0 | 46 | Citations (PDF) |
| 1145 | Structure−Property Study of Diblock Copolymer Micelles: Core and Corona Radius with Varying Composition and Degree of Polymerization | 5.0 | 43 | Citations (PDF) |
| 1146 | Phase Behavior of the Melt of Polystyrene−Poly(ethylene oxide) Metallo-Supramolecular Diblock Copolymer with Bulky Counterions | 5.0 | 36 | Citations (PDF) |
| 1147 | RAFT Polymerization of 1-Ethoxyethyl Acrylate: A Novel Route toward Near-Monodisperse Poly(acrylic acid) and Derived Block Copolymer Structures | 5.0 | 67 | Citations (PDF) |
| 1148 | Synthesis of Terpyridine-Terminated Polymers by Anionic Polymerization | 5.0 | 32 | Citations (PDF) |
| 1149 | Investigation of the Living Cationic Ring-Opening Polymerization of 2-Methyl-, 2-Ethyl-, 2-Nonyl-, and 2-Phenyl-2-oxazoline in a Single-Mode Microwave Reactor† | 5.0 | 281 | Citations (PDF) |
| 1150 | Microwave-Assisted Synthesis of a 42-Membered Library of Diblock Copoly(2-oxazoline)s and Chain-Extended Homo Poly(2-oxazoline)s and Their Thermal Characterization | 5.0 | 142 | Citations (PDF) |
| 1151 | Star-Block Copolymers as Templates for the Preparation of Stable Gold Nanoparticles | 3.6 | 97 | Citations (PDF) |
| 1152 | The Introduction of High-Throughput Experimentation Methods for Suzuki–Miyaura Coupling Reactions in University Education | 2.8 | 20 | Citations (PDF) |
| 1153 | Fluorescent sensing of transition metal ions based on the encapsulation of dithranol in a polymeric core shell architecture | 3.4 | 62 | Citations (PDF) |
| 1154 | Combinatorial methods and high-throughput experimentation in synthetic polymer chemistry | 0.1 | 0 | Citations (PDF) |
| 1155 | Formation of Metallo-Polymers and -Macrocycles by Complexation of Alkyl-Linked Di-Terpyridines with Iron(II) Ions | 2.3 | 6 | Citations (PDF) |
| 1156 | Synthesis of an Isocyanate-Functionalized Terpyridine as Building Block for Metallo-Supramolecular Polymers | 1.4 | 0 | Citations (PDF) |
| 1157 | PB1-F2, an Influenza A Virus-Encoded Proapoptotic Mitochondrial Protein, Creates Variably Sized Pores in Planar Lipid Membranes | 3.6 | 123 | Citations (PDF) |
| 1158 | Physicochemical characterization of protamine-phosphorothioate nanoparticles | 2.8 | 26 | Citations (PDF) |
| 1159 | A Novel Light-Emitting Mixed-Ligand Iridium(III) Complex With a Polymeric Terpyridine-PEG Macroligand: Synthesis And Characterization | 0.1 | 0 | Citations (PDF) |
| 1160 | Novel iridium complexes with polymer side-chains | 0.1 | 0 | Citations (PDF) |
| 1161 | Linear coordination polymers: synthetic strategies and solution viscosities | 2.1 | 17 | Citations (PDF) |
| 1162 | Asymmetric Bipyridine-Terpyridine-Copper(II) Complexes: An Approach for New Supramolecular Architectures | 0.9 | 15 | Citations (PDF) |
| 1163 | Polymeric ruthenium bipyridine complexes: New potential materials for polymer solar cells | 2.3 | 41 | Citations (PDF) |
| 1164 | Parallel kinetic investigation of 2-oxazoline polymerizations with different initiators as basis for designed copolymer synthesis | 2.3 | 116 | Citations (PDF) |
| 1165 | High-throughput experimentation in atom transfer radical polymerization: A general approach toward a directed design and understanding of optimal catalytic systems | 2.3 | 51 | Citations (PDF) |
| 1166 | Mixed iridium(III) and ruthenium(II) polypyridyl complexes containing poly(?-caprolactone)-bipyridine macroligands | 2.3 | 55 | Citations (PDF) |
| 1167 | Expanding the supramolecular polymer LEGO system: Nitroxide-mediated living free-radical polymerization as a tool for mono- and telechelic polystyrenes | 2.3 | 75 | Citations (PDF) |
| 1168 | Free radical and thermal curing of terpyridine-modified terpolymers | 2.3 | 10 | Citations (PDF) |
| 1169 | Metallo-supramolecular block copolymer micelles: Improved preparation and characterization | 2.3 | 32 | Citations (PDF) |
| 1170 | Iron halide mediated atom transfer radical polymerization of methyl methacrylate withN-alkyl-2-pyridylmethanimine as the ligand | 2.3 | 37 | Citations (PDF) |
| 1171 | Automated parallel investigations/optimizations of the reversible addition-fragmentation chain transfer polymerization of methyl methacrylate | 2.3 | 58 | Citations (PDF) |
| 1172 | Nanolithography and Nanochemistry: Probe-Related Patterning Techniques and Chemical Modification for Nanometer-Sized Devices | 14.4 | 306 | Citations (PDF) |
| 1173 | Inkjet Printing of Polymers: State of the Art and Future Developments | 24.5 | 1,816 | Citations (PDF) |
| 1174 | New Functional Polymers and Materials Based on 2,2′:6′,2″-Terpyridine Metal Complexes | 24.5 | 361 | Citations (PDF) |
| 1175 | Nanolithographie und Nanochemie: Sondentechniken zur Strukturierung und chemischen Modifizierung von Nanobauelementen | 1.4 | 23 | Citations (PDF) |
| 1176 | Experimental Design for Combinatorial and High Throughput Materials Development. Herausgegeben von James N. Cawse. | 1.4 | 0 | Citations (PDF) |
| 1177 | Synthesis of 2,2′‐Bipyridines: Versatile Building Blocks for Sexy Architectures and Functional Nanomaterials | 2.3 | 192 | Citations (PDF) |
| 1178 | Combinatorial Methods, Automated Synthesis and High-Throughput Screening in Polymer Research: The Evolution Continues | 4.1 | 124 | Citations (PDF) |
| 1179 | Ink-jet Printing Polymers and Polymer Libraries Using Micropipettes | 4.1 | 123 | Citations (PDF) |
| 1180 | Software Solutions for Combinatorial and High-Throughput Materials and Polymer Research | 4.1 | 26 | Citations (PDF) |
| 1181 | Techniques and Instrumentation for Combinatorial and High-Throughput Polymer Research: Recent Developments | 4.1 | 22 | Citations (PDF) |
| 1182 | High-Throughput Investigation of Polymerization Kinetics by Online Monitoring of GPC and GC | 4.1 | 53 | Citations (PDF) |
| 1183 | A High-Throughput Approach towards Tailor-Made Water-Soluble Metallo-Supramolecular Polymers | 4.1 | 19 | Citations (PDF) |
| 1184 | The Effect of Temperature on the Living Cationic Polymerization of 2-Phenyl-2-oxazoline Explored Utilizing an Automated Synthesizer | 4.1 | 49 | Citations (PDF) |
| 1185 | A Mixed Ruthenium Polypyridyl Complex Containing a PEG-Bipyridine Macroligand | 4.1 | 36 | Citations (PDF) |
| 1186 | Monomode Microwave-Assisted Atom Transfer Radical Polymerization | 4.1 | 63 | Citations (PDF) |
| 1187 | Metallo-Polymerization/-Cyclization of a C16-Bridged Di-Terpyridine Ligand and Iron(II) Ions | 4.1 | 29 | Citations (PDF) |
| 1188 | A Novel Light-Emitting Mixed-Ligand Iridium(III) Complex with a Terpyridine-Poly(ethylene glycol) Macroligand | 4.1 | 45 | Citations (PDF) |
| 1189 | Microwave-Assisted Polymer Synthesis: State-of-the-Art and Future Perspectives | 4.1 | 471 | Citations (PDF) |
| 1190 | Single-Mode Microwave Ovens as New Reaction Devices: Accelerating the Living Polymerization of 2-Ethyl-2-Oxazoline | 4.1 | 189 | Citations (PDF) |
| 1191 | Characterization of a Poly(2-oxazoline) Library by High-Throughput, Automated Contact-Angle Measurements and Surface-Energy Calculations | 4.1 | 41 | Citations (PDF) |
| 1192 | Cylindrical Micelles from the Aqueous Self-Assembly of an Amphiphilic Poly(ethylene oxide)–b-Poly(ferrocenylsilane) (PEO-b-PFS) Block Copolymer with a Metallo-Supramolecular Linker at the Block Junction | 3.4 | 121 | Citations (PDF) |
| 1193 | Synthesis, complete characterization, and enantioselective electrokinetic separation of functionalized ruthenium complex enantiomers | 3.2 | 15 | Citations (PDF) |
| 1194 | Self-assembled chiral terpyridine ruthenium complexes | 1.4 | 10 | Citations (PDF) |
| 1195 | Synthesis and optical properties of (a)chiral terpyridine–ruthenium complexes | 2.0 | 9 | Citations (PDF) |
| 1196 | New supramolecular polymers containing both terpyridine metal complexes and quadruple hydrogen bonding unitsElectronic supplementary information (ESI) available: experimental details. See http://www.rsc.org/suppdata/cc/b3/b314459n/ | 3.4 | 83 | Citations (PDF) |
| 1197 | Ink-jet printing of polymers ? from single dots to thin film libraries | 7.3 | 217 | Citations (PDF) |
| 1198 | An efficient iron-based catalyst bearing N-alkyl-2-pyridylmethanimine ligand for atom transfer radical polymerisation | 3.4 | 20 | Citations (PDF) |
| 1199 | Block copolymer libraries: modular versatility of the macromolecular Lego® system | 3.4 | 34 | Citations (PDF) |
| 1200 | Combinatorial Synthesis of Star-Shaped Block Copolymers: Host−Guest Chemistry of Unimolecular Reversed Micelles | 15.0 | 114 | Citations (PDF) |
| 1201 | Combined Biotin-Terpyridine Systems: A New Versatile Bridge between Biology, Polymer Science and Metallo-supramolecular Chemistry | 5.1 | 27 | Citations (PDF) |
| 1202 | Photovoltaic Properties of a Conjugated Polymer Blend of MDMO−PPV and PCNEPV | 6.7 | 119 | Citations (PDF) |
| 1203 | From Data to Knowledge: Chemical Data Management, Data Mining, and Modeling in Polymer Science | 4.6 | 30 | Citations (PDF) |
| 1204 | Inkjet Printing of Well-Defined Polymer Dots and Arrays | 3.6 | 474 | Citations (PDF) |
| 1205 | Recent developments in the supramolecular chemistry of terpyridine–metal complexes | 37.7 | 785 | Citations (PDF) |
| 1206 | Projection Structure and Oligomeric State of the Osmoregulated Sodium/Glycine Betaine Symporter BetP of Corynebacterium glutamicum | 4.1 | 46 | Citations (PDF) |
| 1207 | New 4′-Functionalized 2,2′:6′,2′′-Terpyridines for Applications in Macromolecular Chemistry and Nanoscience | 2.3 | 40 | Citations (PDF) |
| 1208 | Synthesis and Characterization of Novel Substituted 3,6-Di(2-pyridyl)pyridazine Metal-Coordinating Ligands | 2.3 | 51 | Citations (PDF) |
| 1209 | Syntheses of Functionalized 2,2′:6′,2′′‐Terpyridines | 2.3 | 148 | Citations (PDF) |
| 1210 | Relative binding strength of terpyridine model complexes under matrix-assisted laser desorption/ionization mass spectrometry conditions | 1.7 | 81 | Citations (PDF) |
| 1211 | Linear Terpyridine-Ruthenium(II) Poly(ethylene glycol) Coordination Polymers | 2.4 | 85 | Citations (PDF) |
| 1212 | Supramolecular Branching and Crosslinking of Terpyridine-Modified Copolymers: Complexation and Decomplexation Studies in Diluted Solution | 2.4 | 95 | Citations (PDF) |
| 1213 | Aqueous Micelles from Supramolecular Graft Copolymers | 2.4 | 53 | Citations (PDF) |
| 1214 | Water-Soluble Building Blocks for Terpyridine-Containing Supramolecular Polymers: Synthesis, Complexation, and pH Stability Studies of Poly(ethylene oxide) Moieties | 2.4 | 96 | Citations (PDF) |
| 1215 | Terpyridine-Functionalized TentaGel Microbeads: Synthesis, Metal Chelation and First Sequential Complexation | 4.1 | 12 | Citations (PDF) |
| 1216 | Inkjet Printing of Polymer Micro-Arrays and Libraries: Instrumentation, Requirements, and Perspectives | 4.1 | 167 | Citations (PDF) |
| 1217 | Characterization of Defined Metal-Containing Supramolecular Block Copolymers | 4.1 | 76 | Citations (PDF) |
| 1218 | Automated Scanning Probe Microscopy as a New Tool for Combinatorial Polymer Research: Conductive Carbon Black/Poly(dimethylsiloxane) Composites | 4.1 | 25 | Citations (PDF) |
| 1219 | Application of a Parallel Synthetic Approach in Atom-Transfer Radical Polymerization: Set-Up and Feasibility Demonstration | 4.1 | 53 | Citations (PDF) |
| 1220 | Living Cationic Polymerizations Utilizing an Automated Synthesizer: High-Throughput Synthesis of Polyoxazolines | 4.1 | 73 | Citations (PDF) |
| 1221 | Combinatorial Methods, Automated Synthesis and High-Throughput Screening in Polymer Research: Past and Present | 4.1 | 200 | Citations (PDF) |
| 1222 | Automated Parallel Temperature Optimization and Determination of Activation Energy for the Living Cationic Polymerization of 2-Ethyl-2-oxazoline | 4.1 | 54 | Citations (PDF) |
| 1223 | Instrumentation for Combinatorial and High-Throughput Polymer Research: A Short Overview | 4.1 | 62 | Citations (PDF) |
| 1224 | Potentials and Limitations of Automated Parallel Emulsion Polymerization | 4.1 | 16 | Citations (PDF) |
| 1225 | Highly Ordered Self-Assembled Architectures of Modified Terpyridines on Highly Ordered Pyrolitic Graphite Imaged by Scanning Tunneling Microscopy | 17.0 | 19 | Citations (PDF) |
| 1226 | Analysis of Metallo-Supramolecular Systems Using Single-Molecule Force Spectroscopy | 17.0 | 74 | Citations (PDF) |
| 1227 | Vom einfachen Komplex zum komplexen Gitter: Metallo-supramolekulare Chemie | 0.2 | 10 | Citations (PDF) |
| 1228 | From Supramolecular Block Copolymers to Advanced Nano-Objects | 3.4 | 104 | Citations (PDF) |
| 1229 | Optimization of the preparation process for human serum albumin (HSA) nanoparticles | 4.8 | 702 | Citations (PDF) |
| 1230 | Synthesis and characterization of metallo-supramolecular micelles | 3.4 | 17 | Citations (PDF) |
| 1231 | Terpyridine-modified poly(vinyl chloride): Possibilities for supramolecular grafting and crosslinking | 2.3 | 31 | Citations (PDF) |
| 1232 | Metallo-supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy | 2.3 | 33 | Citations (PDF) |
| 1233 | New soluble functional polymers by free-radical copolymerization of methacrylates and bipyridine ruthenium complexes | 2.3 | 33 | Citations (PDF) |
| 1234 | Automated multiple-layer spotting for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers utilizing ink-jet printing technology | 1.4 | 30 | Citations (PDF) |
| 1235 | Evaluation of a new multiple-layer spotting technique for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers | 1.4 | 60 | Citations (PDF) |
| 1236 | Terpyridine-based silica supports prepared by ring-opening metathesis polymerization for the selective extraction of noble metals | 3.7 | 13 | Citations (PDF) |
| 1237 | Automated MALDI-TOF-MS Sample Preparation in Combinatorial Polymer Research | 4.6 | 42 | Citations (PDF) |
| 1238 | Engineering with metallo-supramolecular polymers: linear coordination polymers and networks | 0.7 | 32 | Citations (PDF) |
| 1239 | Combining Covalent and Noncovalent Cross-Linking: A Novel Terpolymer for Two-Step Curing Applications | 5.0 | 38 | Citations (PDF) |
| 1240 | Melt Morphology of Polystyrene−Poly(ethylene oxide) Metallo-Supramolecular Diblock Copolymer | 5.0 | 44 | Citations (PDF) |
| 1241 | Soluble High-Molecular-Mass Poly(ethylene oxide)s via Self-Organization | 5.0 | 130 | Citations (PDF) |
| 1242 | l-Lactide Polymerization Utilizing a Hydroxy-Functionalized 3,6-Bis(2-pyridyl)pyridazine as Supramolecular (Co)initiator: Construction of Polymeric [2 × 2] Grids | 5.0 | 46 | Citations (PDF) |
| 1243 | Constructive Nanolithography and Nanochemistry: Local Probe Oxidation and Chemical Modification | 3.6 | 47 | Citations (PDF) |
| 1244 | Structural Characterization of the HIV-1 Vpr N Terminus | 2.2 | 47 | Citations (PDF) |
| 1245 | Retroviruses Have Differing Requirements for Proteasome Function in the Budding Process | 3.6 | 67 | Citations (PDF) |
| 1246 | Synthesis of 4′-Functionalized 2,2′:6′,2′′-Terpyridines via the Pyridone Route: Symmetric and Asymmetric Bis-Complex Formation | 2.3 | 0 | Citations (PDF) |
| 1247 | Synthesis and thermal properties of diblock copolymers utilizing non-covalent interactions | 0.7 | 9 | Citations (PDF) |
| 1248 | Combination of supramolecular cross-linking with covalent cross-linking through epoxide ring-opening including gel studies | 3.1 | 1 | Citations (PDF) |
| 1249 | Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation | 2.1 | 39 | Citations (PDF) |
| 1250 | Fusion Proteins with COOH-terminal Ubiquitin Are Stable and Maintain Dual Functionality in Vivo | 2.2 | 46 | Citations (PDF) |
| 1251 | Equine Infectious Anemia Virus and the Ubiquitin-Proteasome System | 3.6 | 63 | Citations (PDF) |
| 1252 | Multi-functionalized 2,2′:6′,2′′-Terpyridines | 1.4 | 25 | Citations (PDF) |
| 1253 | Access to supramolecular polymers: Large scale synthesis of 4′-chloro-2,2′ : 6′,2′′-terpyridine and an application to poly(propylene oxide) telechelics | 2.1 | 60 | Citations (PDF) |
| 1254 | Terpyridines as supramolecular initiators for living polymerization methods | 0.7 | 16 | Citations (PDF) |
| 1255 | Metallo-Supramolecular Block Copolymer Micelles† | 5.0 | 138 | Citations (PDF) |
| 1256 | Covalent vs Metallo-supramolecular Block Copolymer Micelles | 5.0 | 112 | Citations (PDF) |
| 1257 | Stimuli-Responsive Aqueous Micelles from an ABC Metallo-Supramolecular Triblock Copolymer | 5.0 | 150 | Citations (PDF) |
| 1258 | Exchange interaction and Jahn—Teller correlations in novel tetranuclear supramolecular Cu(II) grid complexes: an ESR study | 2.2 | 9 | Citations (PDF) |
| 1259 | Layer-by-layer self-assembly of supramolecular and biomolecular films | 3.9 | 31 | Citations (PDF) |
| 1260 | Supramolecular poly(L-lactide)s containing terpyridine metal complexes | 3.1 | 1 | Citations (PDF) |
| 1261 | Metallo-supramolecular oligo(p-phenylene vinylene)/[60]fullerene architectures: towards functional materials | 1.9 | 15 | Citations (PDF) |
| 1262 | Titelbild: Angew. Chem. 16/2002 | 1.4 | 0 | Citations (PDF) |
| 1263 | Makromoleküle mit Bipyridin- und Terpyridinkomplexen als Verknüpfungsstellen: erste Schritte auf dem Weg zu metallo-supramolekularen Polymeren | 1.4 | 123 | Citations (PDF) |
| 1264 | Supramolekulares Engineering mit Makromolekülen: ein alternatives Konzept zur Herstellung von Blockcopolymeren | 1.4 | 46 | Citations (PDF) |
| 1265 | Macromolecules Containing Bipyridine and Terpyridine Metal Complexes: Towards Metallosupramolecular Polymers | 14.4 | 685 | Citations (PDF) |
| 1266 | Supramolecular Engineering with Macromolecules: An Alternative Concept for Block Copolymers | 14.4 | 236 | Citations (PDF) |
| 1267 | Polystyrene with Pendant Mixed Functional Ruthenium(II)-Terpyridine Complexes | 4.1 | 53 | Citations (PDF) |
| 1268 | Reversible Metallo-Supramolecular Block Copolymer Micelles Containing a Soft Core | 4.1 | 111 | Citations (PDF) |
| 1269 | Metallo-Supramolecular Graft Copolymers: A Novel Approach Toward Polymer-Analogous Reactions | 4.1 | 108 | Citations (PDF) |
| 1270 | Metallo-Supramolecular Diethylene Glycol: Water-Soluble Reversible Polymers | 4.1 | 110 | Citations (PDF) |
| 1271 | HIV-1 Vpr Displays Natural Protein-Transducing Properties: Implications for Viral Pathogenesis | 2.3 | 83 | Citations (PDF) |
| 1272 | Transcriptional synergy between Tat and PCAF is dependent on the binding of acetylated Tat to the PCAF bromodomain | 7.4 | 128 | Citations (PDF) |
| 1273 | 2,2':6',2''-Terpyridine metal complexes as building blocks for extended functional metallo-supramolecular assemblies and polymers | 4.5 | 91 | Citations (PDF) |
| 1274 | Polymer-supported polymerization catalystsvia romp | 0.7 | 23 | Citations (PDF) |
| 1275 | Functionalized oligomers and copolymers with metal complexing segments: a simple and high yield entry towards 2,2′:6′,2″-terpyridine monofunctionalized telechelics | 0.7 | 40 | Citations (PDF) |
| 1276 | 4′-Functionalized 2,2′:6′,2″-terpyridines as building blocks for supramolecular chemistry and nanoscience | 1.4 | 122 | Citations (PDF) |
| 1277 | Metallo-Supramolecular Initiators for the Preparation of Novel Functional Architectures | 3.4 | 69 | Citations (PDF) |
| 1278 | Biodegradable Polymers with Specific Metal Binding Sites Based on Bipyridine-Containing Poly(lactid acid) and Poly(ɛ-caprolactone): Towards High-Molecular Weight Polyesters | 4.1 | 15 | Citations (PDF) |
| 1279 | Optically Active Supramolecular Poly(L-lactide)s End-Capped with Terpyridine | 4.1 | 81 | Citations (PDF) |
| 1280 | Access to Heterogeneous Atom-Transfer Radical Polymerization (ATRP) Catalysts Based on Dipyridylamine and Terpyridine via Ring-Opening Metathesis Polymerization (ROMP) | 2.4 | 53 | Citations (PDF) |
| 1281 | Projection structure and oligomeric properties of a bacterial core protein translocase | 7.4 | 126 | Citations (PDF) |
| 1282 | A novel influenza A virus mitochondrial protein that induces cell death | 33.0 | 948 | Citations (PDF) |
| 1283 | Cells adapted to the proteasome inhibitor 4-hydroxy- 5-iodo-3-nitrophenylacetyl-Leu-Leu-leucinal-vinyl sulfone require enzymatically active proteasomes for continued survival | 7.5 | 81 | Citations (PDF) |
| 1284 | Cells adapted to the proteasome inhibitor 4-hydroxy- 5-iodo-3-nitrophenylacetyl-Leu-Leu-leucinal-vinyl sulfone require enzymatically active proteasomes for continued survival | 7.5 | 39 | Citations (PDF) |
| 1285 | POLYMERS WITH METAL BINDING UNITS: BIPYRIDINE AND TERPYRIDINE CONTAINING POLYOXAZOLINES | 2.4 | 17 | Citations (PDF) |
| 1286 | Functionalized polymers with metal complexing segments: a simple and high-yield entry towards 2,2′:6′,2″-terpyridine-based oligomers | 4.1 | 85 | Citations (PDF) |
| 1287 | Evidence for high affinity nickel transporter genes in heavy metal resistantStreptomyces spec. | 3.3 | 71 | Citations (PDF) |
| 1288 | A mutation affecting the association equilibrium of formyltransferase from the hyperthermophilic Methanopyrus kandleri and its influence on the enzyme's activity and thermostability | 0.2 | 18 | Citations (PDF) |
| 1289 | Rapid degradation of a large fraction of newly synthesized proteins by proteasomes | 38.0 | 1,428 | Citations (PDF) |
| 1290 | Ubiquitination of HIV-1 and MuLV Gag | 2.3 | 137 | Citations (PDF) |
| 1291 | Human Immunodeficiency Virus Type 1 Vpr Protein Is Incorporated into the Virion in Significantly Smaller Amounts than Gag and Is Phosphorylated in Infected Cells | 3.6 | 98 | Citations (PDF) |
| 1292 | Proteasome inhibition interferes with Gag polyprotein processing, release, and maturation of HIV-1 and HIV-2 | 7.5 | 317 | Citations (PDF) |
| 1293 | Functional and Structural Characterization of Synthetic HIV-1 Vpr That Transduces Cells, Localizes to the Nucleus, and Induces G2 Cell Cycle Arrest | 2.2 | 103 | Citations (PDF) |
| 1294 | Poly(2-oxazoline) block copolymers containing supramolecular segments | 2.1 | 7 | Citations (PDF) |
| 1295 | Membrane interactions and alignment of structures within the HIV-1 Vpu cytoplasmic domain: effect of phosphorylation of serines 52 and 56 | 2.7 | 46 | Citations (PDF) |
| 1296 | Stille-Type Cross-CouplingAn Efficient Way to Various Symmetrically and Unsymmetrically Substituted Methyl-Bipyridines: Toward New ATRP Catalysts | 4.8 | 87 | Citations (PDF) |
| 1297 | Regulation of Virus Release by the Macrophage-Tropic Human Immunodeficiency Virus Type 1 AD8 Isolate Is Redundant and Can Be Controlled by either Vpu or Env | 3.6 | 77 | Citations (PDF) |
| 1298 | High Yield Synthesis of 5,5′-Dimethyl-2,2′-bipyridine and 5,5″-Dimethyl-2,2′:6′,2″-terpyridine and Some Bisfunctionalization Reactions Using N-Bromosuccinimide | 2.3 | 55 | Citations (PDF) |
| 1299 | Synthesis of 5,5′′-Bisfunctionalized 2,2′ : 6′,2′′-Terpyridines using Functionalized Pyridine Building Blocks | 1.4 | 17 | Citations (PDF) |
| 1300 | Synthesis of doubly functionalized bis-tridentate ligands as building blocks for extended metallo-supramolecular assemblies and polymers | 2.1 | 12 | Citations (PDF) |
| 1301 | Self-assembled thin films of organo-metal complexes | 1.9 | 17 | Citations (PDF) |
| 1302 | STM studies on monolayers of [Co(L)4]A8 metallogrids on graphite | 6.7 | 15 | Citations (PDF) |
| 1303 | Generating MHC class I ligands from viral gene products | 6.5 | 60 | Citations (PDF) |
| 1304 | Cyclophilin A Incorporation Is Not Required for Human Immunodeficiency Virus Type 1 Particle Maturation and Does Not Destabilize the Mature Capsid | 2.3 | 49 | Citations (PDF) |
| 1305 | Title is missing! | 1.3 | 13 | Citations (PDF) |
| 1306 | Title is missing! | 1.3 | 13 | Citations (PDF) |
| 1307 | Title is missing! | 1.3 | 15 | Citations (PDF) |
| 1308 | Controlled polymerization of methylmethacrylate and ethylacrylate using tris(4,4'-dimethyl-2,2'-bipyridine) copper(II) hexafluorophosphate complexes and aluminium isopropoxide | 3.1 | 14 | Citations (PDF) |
| 1309 | Kontrollierte Anordnung und Orientierung supramolekularer Metallgitter auf Festkörperoberflächen | 1.4 | 66 | Citations (PDF) |
| 1310 | Characterizing the Solution Properties of Supramolecular Systems by Analytical Ultracentrifugation | 3.4 | 39 | Citations (PDF) |
| 1311 | Controlled Arrangement of Supramolecular Metal Coordination Arrays on Surfaces | 14.4 | 185 | Citations (PDF) |
| 1312 | Design of effective systems for controlled radical polymerization of styrene: Application of 4,4′-dimethyl and 5,5′-dimethyl 2,2′-bipyridine copper(II) complexes | 4.1 | 17 | Citations (PDF) |
| 1313 | New Synthetic Strategy toward Pyridine-Based Ligands for Supramolecular Chemistry Utilizing 2,6-Bis(trimethyltin)pyridine as the Central Building Block† | 4.8 | 60 | Citations (PDF) |
| 1314 | Solution Structure and Orientation of the Transmembrane Anchor Domain of the HIV-1-Encoded Virus Protein U by High-Resolution and Solid-State NMR Spectroscopy | 2.4 | 74 | Citations (PDF) |
| 1315 | Design of supramolecular metal complexing polymers: synthesis, complexation, and polymerization of 5,5"-bisfunctionalized terpyridine building blocks | 2.1 | 10 | Citations (PDF) |
| 1316 | Metallo-Supramolecular Fullerene Architectures: Synthesis and Characterization of Bucky Ligands and a Non-Covalent Dimer | 1.1 | 6 | Citations (PDF) |
| 1317 | Lyotropic-salt-induced changes in monomer/dimer/tetramer association equilibrium of formyltransferase from the hyperthermophilic Methanopyrus kandleri in relation to the activity and thermostability of the enzyme | 0.2 | 45 | Citations (PDF) |
| 1318 | 6,6'-Bisfunctionalized 2,2'-bipyridines as metallo-supramolecular initiators for the living polymerization of oxazolines | 4.1 | 32 | Citations (PDF) |
| 1319 | Supramolecular structures of macromolecules containing bipyridine-copper(I) complexes as revealed from transmission electron microscopy studies | 2.1 | 6 | Citations (PDF) |
| 1320 | Directed synthesis of monofunctionalized 5,5′-disubstituted 2,2′-bipyridines and their first application as metallo-supramolecular initiators | 1.4 | 34 | Citations (PDF) |
| 1321 | Monolayer of metallo-supramolecular complexes | 3.4 | 23 | Citations (PDF) |
| 1322 | Solution Structure of the Cytoplasmic Domain of the Human CD4 Glycoprotein by CD and1H NMR Spectroscopy: Implications for Biological Functions | 2.4 | 31 | Citations (PDF) |
| 1323 | Self-Assembly at the Air−Water Interface. In-Situ Preparation of Thin Films of Metal Ion Grid Architectures | 15.0 | 95 | Citations (PDF) |
| 1324 | Magnetism of self-assembled mono- and tetranuclear supramolecularNi2+complexes | 3.4 | 71 | Citations (PDF) |
| 1325 | CD4 Glycoprotein Degradation Induced by Human Immunodeficiency Virus Type 1 Vpu Protein Requires the Function of Proteasomes and the Ubiquitin-Conjugating Pathway | 3.6 | 235 | Citations (PDF) |
| 1326 | Bipyridne Building Blocks for Self-Organization Systems: First Complete NMR-spectroscopic Investigation of 6,6'-Disubstituted 2,2'-Bipyridines Obtained via N-Oxidation Route and Related Reactions | 0.4 | 9 | Citations (PDF) |
| 1327 | Intramolecular Antiferromagnetic Coupling in Supramolecular Grid Structures withCo2+Metal Centers | 8.2 | 132 | Citations (PDF) |
| 1328 | The Human Immunodeficiency Virus Type 1 (HIV-1) Vpu Protein Interferes with an Early Step in the Biosynthesis of Major Histocompatibility Complex (MHC) Class I Molecules | 9.3 | 189 | Citations (PDF) |
| 1329 | Structural and Electronic Properties of Self-Assembled Supramolecular Grid Structures: Doping of Supramolecular Thin Films | 0.1 | 5 | Citations (PDF) |
| 1330 | Magnetic Supramolecular Grid Structures: Intramolecular Coupling of Four Separate Spins | 0.1 | 1 | Citations (PDF) |
| 1331 | Synthesis, structure, and properties of oligo-tridentate ligands; covalently assembled precursors of coordination arrays | 1.7 | 120 | Citations (PDF) |
| 1332 | Cytoskeleton-membrane connections in the human erythrocyte membrane: band 4.1 binds to tetrameric band 3 protein | 2.2 | 19 | Citations (PDF) |
| 1333 | Denaturation and Reactivation of Dimeric Human Glutathione Reductase. An Assay for Folding Inhibitors | 0.2 | 38 | Citations (PDF) |
| 1334 | Morphological studies of Cu(I)‐complexed bipyridine‐containing block copolymers by combined transmission electron microscopy techniques | 1.7 | 2 | Citations (PDF) |
| 1335 | Coordination Arrays: Tetranuclear Cobalt(II) Complexes with[2× 2]-Grid Structure | 4.7 | 202 | Citations (PDF) |
| 1336 | Koordinationsarchitekturen: Vierkern‐Cobalt(II)‐Komplexe mit [2 × 2]‐Gitterstruktur | 1.4 | 74 | Citations (PDF) |
| 1337 | Identification of an ion channel activity of the Vpu transmembrane domain and its involvement in the regulation of virus release from HIV-1-infected cells | 2.7 | 272 | Citations (PDF) |
| 1338 | Associations Between Erythrocyte Band 3 Protein and Aldolase in Detergent Solution. Determining their Stoichiometry by Analytical Ultracentrifugation | 0.2 | 7 | Citations (PDF) |
| 1339 | Solution structure of the cytoplasmic domain of the human immunodeficiency virus type 1 encoded virus protein U (Vpu) | 0.1 | 64 | Citations (PDF) |
| 1340 | Macromolecules with specific constitution and supramolecular structures | 0.7 | 9 | Citations (PDF) |
| 1341 | Block copolymers with bipyridine containing segments: Synthesis and self-organization by Cu(I) complexation | 2.4 | 25 | Citations (PDF) |
| 1342 | Synthesis of metal-complexing latices via polymerization in microemulsion | 4.1 | 28 | Citations (PDF) |
| 1343 | A general synthetic strategy for functionalized oligo(bipyridines): new building blocks for supramolecular chemistry and their first application in macromolecules | 1.9 | 21 | Citations (PDF) |
| 1344 | Solution structure of the hydrophilic region of HIV‐1 encoded virus protein U (Vpu) by CD and lH NMR spectroscopy | 0.1 | 69 | Citations (PDF) |
| 1345 | The Molar Mass of an Active Photosystem I Complex from the Cyanobacterium Synechococcus PCC 7002 | 1.6 | 9 | Citations (PDF) |
| 1346 | Detection of mycoplasma contaminations by the polymerase chain reaction | 1.4 | 39 | Citations (PDF) |
| 1347 | The Human Immunodeficiency Virus Type 1 Encoded Vpu Protein is Phosphorylated by Casein Kinase-2 (CK-2) at Positions Ser52 and Ser56 within a Predicted α-Helix-Turn-α-Helix-Motif | 4.1 | 167 | Citations (PDF) |
| 1348 | Erythrocyte band 3 protein strongly interacts with phosphoinositides | 2.7 | 6 | Citations (PDF) |
| 1349 | The dimerization stability of the HLH-LZ transcription protein family is modulated by the leucine zippers: A CD and NMR study of TFEB and c-Myc | 2.4 | 46 | Citations (PDF) |
| 1350 | Differential activities of the human immunodeficiency virus type 1-encoded Vpu protein are regulated by phosphorylation and occur in different cellular compartments | 3.6 | 213 | Citations (PDF) |
| 1351 | Synthesis and chain extension of bipyridine-terminated polyethers with copper(I) ions | 5.0 | 76 | Citations (PDF) |
| 1352 | Expression ofnef, vpu, CA and CD4 during the infection of lymphoid and monocytic cell lines with HIV-1 | 1.8 | 12 | Citations (PDF) |
| 1353 | Human-immundeficiency-virus-type-1-encoded Vpu protein is phosphorylated by casein kinase II | 0.2 | 118 | Citations (PDF) |
| 1354 | Band 3-hemoglobin associations The band 3 tetramer is the oxyhemoglobin binding site | 2.7 | 31 | Citations (PDF) |
| 1355 | Comparison of Four Anti-HIV Screening Assays Which Belong to Different Test Generations | 2.3 | 3 | Citations (PDF) |
| 1356 | Monomeric erythrocyte band 3 protein transports anions. | 7.5 | 48 | Citations (PDF) |
| 1357 | Complex associations between membrane proteins analyzed by analytical ultracentrifugation: Studies on the erythrocyte membrane proteins band 3 and ankyrin | 2.1 | 24 | Citations (PDF) |
| 1358 | Asymmetrie Reconstitution of the Erythrocyte Anion Transport System in Vesicles of Different Curvature: Implications for the Shape of the Band 3 Protein | 1.6 | 7 | Citations (PDF) |
| 1359 | Does sphingomyelin inhibit the erythrocyte anion transport system? | 2.7 | 1 | Citations (PDF) |
| 1360 | The turnover number for band 3-mediated sulfate transport in phosphatidylcholine bilayers | 2.7 | 8 | Citations (PDF) |
| 1361 | The relationships between oligomeric structure and function of band 3 protein from human erythrocyte membranes: Present knowledge and suggestions for further experiments | 9.4 | 15 | Citations (PDF) |
| 1362 | A new method for the reconstitution of the anion transport system of the human erythrocyte membrane | 2.5 | 31 | Citations (PDF) |
| 1363 | Does Dimeric Melittin Occur in Aqueous Solutions? | 2.2 | 12 | Citations (PDF) |
| 1364 | An Ultracentrifuge Study on the Self-Association of Glucose Dehydrogenase from Bacillus megaterium | 1.2 | 3 | Citations (PDF) |
| 1365 | Formation and properties of tetramers of band 3 protein from human erythrocyte membranes in planar lipid bilayers | 2.2 | 24 | Citations (PDF) |
| 1366 | The state of association of band 3 protein of the human erythrocyte membrane in solutions of nonionic detergents | 2.2 | 80 | Citations (PDF) |
| 1367 | The nature of the stable noncovalent dimers of band 3 protein from erythrocyte membranes in solutions of Triton X-100 | 2.7 | 51 | Citations (PDF) |
| 1368 | The Binding of Deoxycholic Acid to Band 3 Protein from Human Erythrocyte Membranes and to Bovine Serum Albumin | 1.2 | 3 | Citations (PDF) |
| 1369 | The Binding of Ca2⊕to Solubilized Band 3 Protein of the Human Erythrocyte Membrane | 1.2 | 11 | Citations (PDF) |
| 1370 | Band 3 protein-cholesterol interactions in erythrocyte membranes | 2.7 | 47 | Citations (PDF) |
| 1371 | Self-association of band 3 protein from erythrocyte membranes in solutions of a nonionic detergent, Ammonyx-LO | 1.7 | 0 | Citations (PDF) |
| 1372 | The structure of mixed cholesterol/phospholipid monolayers as probed by interactions with band 3 protein from erythrocyte membranes | 1.7 | 1 | Citations (PDF) |
| 1373 | Interactions of Band 3-Protein from Human Erythrocyte Membranes with Phospholipid Monolayers at the Air-Water Interface | 1.2 | 9 | Citations (PDF) |
| 1374 | Interactions of Band 3-Protein from Human Erythrocyte Membranes with Cholesterol and Cholesterol Analogues | 1.2 | 20 | Citations (PDF) |
| 1375 | Self-Association of Band 3-Protein from Human Erythrocyte Membranes in Aqueous Solutions | 1.2 | 66 | Citations (PDF) |
| 1376 | A New Method for the Preparation of Band 3, the Main Integral Protein of the Human Erythrocyte Membrane | 2.1 | 0 | Citations (PDF) |
| 1377 | Interactions between Lipid Monolayers and Band 3-Protein from Human Erythrocyte Membranes | 0.0 | 1 | Citations (PDF) |
| 1378 | Band 3-protein from human erythrocyte membranes strongly interacts with cholesterol | 2.7 | 44 | Citations (PDF) |
| 1379 | Protein-induced conductivity changes in black lipid membranes and protein aggregation | 2.7 | 14 | Citations (PDF) |
| 1380 | Variability of Conductivity Changes in Black Phosphatidylserine Membranes Induced by Proteins from Erythrocyte Membranes | 1.6 | 2 | Citations (PDF) |
| 1381 | Reversible Transformation of Precipitated and Nonprecipitated Lipoproteins Recombined from Proteins and Lipids of Erythrocyte Membranes | 1.6 | 0 | Citations (PDF) |
| 1382 | Interactions Between Black Lipid Membranes and the Loosely Bound Proteins from Erythrocyte Membranes | 1.6 | 5 | Citations (PDF) |
| 1383 | Electrical properties of black membranes from oxidized cholesterol and a strongly bound protein fraction of human erythrocyte membranes | 2.2 | 12 | Citations (PDF) |
| 1384 | Association of Protein Fractions and Lipids from Human Erythrocyte Membranes, II. Studies on a Loosely Bound Protein Fraction | 1.2 | 35 | Citations (PDF) |
| 1385 | Association of Protein Fractions and Lipids from Human Erythrocyte Membranes, I, Studies on a Strongly Bound Protein Fraction | 1.2 | 17 | Citations (PDF) |
| 1386 | Poly(2-oxazoline) Homopolymers and Diblock Copolymers Containing Retinoate ω-End Groups | 4.6 | 4 | Citations (PDF) |
| 1387 | Two‐Dimensional Photosensitizer Nanosheets via Low‐Energy Electron Beam Induced Cross‐Linking of Self‐Assembled RuII Polypyridine Monolayers | 1.4 | 3 | Citations (PDF) |
| 1388 | Nanoparticle Formulation Composition Analysis by Liquid Chromatography on Reversed-Phase Monolithic Silica | 6.5 | 4 | Citations (PDF) |
| 1389 | Polymeric Layer-Mediated Redox Sensing System Containing Covalently Attached CdSe/ZnS Quantum Dots on Au Films | 5.3 | 0 | Citations (PDF) |
| 1390 | Intramolecular Energy Transfer Competing with Light-Driven Intermolecular Proton Transfer in an Iron(II)-NHC Complex? A Query into the Role of Photobasic Ligands and MLCT States | 4.2 | 1 | Citations (PDF) |
| 1391 | Radical Polymer‐based Positive Electrodes for Dual‐Ion Batteries: Enhancing Performance with γ‐Butyrolactone‐based Electrolytes | 6.2 | 3 | Citations (PDF) |
| 1392 | Polyesteracetals via TBD Catalyzed Ring‐Opening Polymerization | 4.1 | 1 | Citations (PDF) |
| 1393 | PRIAMOS: A technique for mixing embedding media for freely adjusting pH value and refractive index (RI) for optical clearing (OC) of whole tissue samples | 1.7 | 0 | Citations (PDF) |
| 1394 | Understanding the Interplay Between Pore Structure and Ionic Liquid Interaction on the Gas Uptake of Microporous Carbons | 11.5 | 1 | Citations (PDF) |
| 1395 | 3D-printed microfluidic dialysis apparatus for efficient polymer purification | 3.9 | 2 | Citations (PDF) |
| 1396 | Novel dopamine-containing gel polymer electrolytes for Li-organic batteries | 4.4 | 1 | Citations (PDF) |
| 1397 | Enhanced Efficiency of the Microsomal Prostaglandin E
2
Synthase-1 Inhibitor AGU661 in Human Whole Blood by Encapsulation into PLGA-Based Nanoparticles | 4.2 | 2 | Citations (PDF) |
| 1398 | Unveiling the knowledge of a RAFT polymerization database obtained from an automated parallel synthesizer | 4.5 | 1 | Citations (PDF) |
| 1399 | Matching drug and polymer for efficient delivery of anti-inflammatory drugs: PLGA, polyesteramides, and acetalated dextran | 5.5 | 1 | Citations (PDF) |
| 1400 | UV-polymerized composite ionogels for Li-organic batteries | 5.3 | 0 | Citations (PDF) |
| 1401 | Fluorine-Free Ion Exchange Membranes for (Photo)electrochemical Applications | 5.9 | 0 | Citations (PDF) |
| 1402 | High‐Performance Phthalonitrile Resins Partially Derived from a Furan Bio‐Based Chemical Platform | 6.2 | 1 | Citations (PDF) |
| 1403 | Evaluating the Antiviral Efficacy of Encapsulated PKC Inhibitor BIM‐I against influenza A Virus Infection | 8.8 | 0 | Citations (PDF) |
| 1404 | Stepwise synthesis of symmetric and asymmetric Anderson-polyoxometalates for light-driven hydrogen evolution | 6.3 | 0 | Citations (PDF) |
| 1405 | Novel Functional Materials via 3D Printing by Vat Photopolymerization | 17.0 | 1 | Citations (PDF) |
| 1406 | Structure‐Aware Machine Learning for Polymers: A Hierarchical Graph Network for Predicting Properties From Statistical Ensembles | 4.1 | 0 | Citations (PDF) |
| 1407 | RGD Modification of Poly(2‐oxazoline) Cryogels: Investigation of Material Properties and Cellular Adhesion | 4.0 | 0 | Citations (PDF) |
| 1408 | An azide-containing initiator for the cationic ring-opening-polymerization of 2-oxazolines | 5.9 | 0 | Citations (PDF) |
| 1409 | Bio‐Orthogonally Crosslinked Supramolecular Polymer Bottlebrush Hydrogels for Long‐Term 3D Cell Culture | 17.0 | 0 | Citations (PDF) |
| 1410 | Locally Resolved Thermally Induced Degradation of PM6:Y6-Based Organic Solar Cells | 5.4 | 0 | Citations (PDF) |
| 1411 | Prolonged Release of
IL
‐10 From Enzyme‐Mediated Poly‐
l
‐(Tyrosine‐
co
‐Phenylalanine) Nanocrystals Enhances Stability and Modulates Inflammatory Responses | 2.9 | 0 | Citations (PDF) |
| 1412 | Wetting properties of bio-colloidal suspension droplets of lipid, protein, and copolymers | 2.1 | 0 | Citations (PDF) |
| 1413 | Aluminium-steam reaction in a swirled stabilized flame: a new way for decarbonized combined heat and hydrogen production | 9.0 | 0 | Citations (PDF) |
| 1414 | POx-Lipids as an Alternative to PEG-Lipids? Multimethod Assessment of Chemistry and Structure | 6.5 | 0 | Citations (PDF) |
| 1415 | Extrahepatic Gene Editing In Vivo Using Organic Solvent‐Free Lipid Nanoparticles | 11.5 | 0 | Citations (PDF) |
| 1416 | An Innovative Oral Ex Vivo Biofilm Model for Antimicrobial Investigations | 3.0 | 0 | Citations (PDF) |
| 1417 | Investigation of stable viologen-based anodes for fully organic batteries with water-based electrolyte | 3.9 | 0 | Citations (PDF) |
| 1418 | Carboxylic acid α-end-functionalized poly(2-oxazoline)s synthesized through benzylic CROP initiators | 3.9 | 0 | Citations (PDF) |
| 1419 | Efficient Machine Learning Prediction of Solvent‐Dependent 1H NMR Chemical Shifts in Zinc Complexes | 4.8 | 0 | Citations (PDF) |
| 1420 | Viscoelastic analysis of sodium metaphosphate-poly(ethylene glycol) (NaPO3-PEG) coacervates | 3.3 | 0 | Citations (PDF) |
