| 1 | Graph neural networks for strut-based architected solids | 4.8 | 9 | Citations (PDF) |
| 2 | Capillary rise in a packing of glass spheres | 4.8 | 4 | Citations (PDF) |
| 3 | High axial compressive strength in 3D-printed continuous carbon fiber reinforced thermoplastics by controlling printing forces | 10.6 | 21 | Citations (PDF) |
| 4 | Blistering of hafnia/hafnon composites exposed to molten silicate deposits | 7.6 | 5 | Citations (PDF) |
| 5 | Eliminating structural defects in large area mechanical metamaterials via hot lithography in large-area projection micro-stereolithography | 2.1 | 2 | Citations (PDF) |
| 6 | Evaluation of the ability of full-field displacement measurements to extract yield surface parameters | 3.1 | 2 | Citations (PDF) |
| 7 | Embedded 3D printing of isotropically enhanced lattice structure with programmable elasticity via three-dimensional fiber alignment | 2.1 | 4 | Citations (PDF) |
| 8 | Void growth in the lithium anode of a solid state battery | 3.1 | 9 | Citations (PDF) |
| 9 | Exploration of digital volume correlation in nominally homogeneous metals | 2.8 | 3 | Citations (PDF) |
| 10 | Editorial for the Special Issue “Additive Manufacturing‐Enabled Architected Materials” | 2.3 | 1 | Citations (PDF) |
| 11 | Fracture mechanics characterises fibre entanglement | 5.6 | 1 | Citations (PDF) |
| 12 | Size effects in a power law creeping layer under compression or shear, and implications for deformation mechanisms of lithium films | 4.8 | 14 | Citations (PDF) |
| 13 | Failure mechanisms at the Li anode/solid electrolyte interface during Li stripping | 2.8 | 7 | Citations (PDF) |
| 14 | 3D observations provide striking findings in rubber elasticity | 5.3 | 17 | Citations (PDF) |
| 15 | The chemo-mechanics of initiation of crack advance in Niobium Tungsten Oxide single crystals due to delithiation | 4.8 | 6 | Citations (PDF) |
| 16 | Imbibition of water into a cellulose foam: The kinetics | 4.8 | 1 | Citations (PDF) |
| 17 | Multiscale Experiments and Predictive Modeling for Failure Mitigation in Additive Manufacturing of Lattices (Adv. Mater. Technol. 24/2024) | 4.2 | 0 | Citations (PDF) |
| 18 | Contact guidance via heterogeneity of substrate elasticity | 6.8 | 10 | Citations (PDF) |
| 19 | Effect of water content on the constitutive response of a cellulose foam | 3.1 | 4 | Citations (PDF) |
| 20 | Void growth in metal anodes in solid-state batteries: Recent progress and gaps in understanding | 3.1 | 21 | Citations (PDF) |
| 21 | Ingress of Li into Solid Electrolytes: Cracking and Sparsely Filled Cracks | 6.4 | 17 | Citations (PDF) |
| 22 | Analysis of hydrogen diffusion in the three stage electro-permeation test | 1.4 | 2 | Citations (PDF) |
| 23 | Underexcitation prevents crystallization of granular assemblies subjected to high-frequency vibration | 5.3 | 4 | Citations (PDF) |
| 24 | Strain rate sensitivity of the hydrogen embrittlement of ferritic steels | 7.6 | 41 | Citations (PDF) |
| 25 | Vacancy diffusion and its consequences for void growth at the interface of a stripping metal electrode and solid electrolyte | 4.2 | 18 | Citations (PDF) |
| 26 | Rapid inverse design of metamaterials based on prescribed mechanical behavior through machine learning | 11.0 | 361 | Citations (PDF) |
| 27 | The strength of a constrained lithium layer | 7.6 | 17 | Citations (PDF) |
| 28 | Cracking and associated volumetric expansion of NMC811 secondary particles | 6.2 | 52 | Citations (PDF) |
| 29 | A compliant and low-expansion 2-phase micro-architectured material, with potential application to solid-state Li-ion batteries | 4.8 | 8 | Citations (PDF) |
| 30 | The toughness of mechanical metamaterials | 24.2 | 228 | Citations (PDF) |
| 31 | Effect of Lithiation upon the Shear Strength of NMC811 Single Crystals | 2.3 | 28 | Citations (PDF) |
| 32 | The coupled strength and toughness of interconnected and interpenetrating multi-material gyroids | 3.6 | 18 | Citations (PDF) |
| 33 | Contact guidance as a consequence of coupled morphological evolution and motility of adherent cells | 1.7 | 8 | Citations (PDF) |
| 34 | Interfacial delamination of a sandwich layer by aqueous corrosion | 7.2 | 9 | Citations (PDF) |
| 35 | Multifunctionality of Nanoengineered Self‐Sensing Lattices Enabled by Additive Manufacturing | 2.3 | 20 | Citations (PDF) |
| 36 | Gravity enables self‐assembly | 2.3 | 1 | Citations (PDF) |
| 37 | Pinching of gel-filled honeycomb | 3.0 | 9 | Citations (PDF) |
| 38 | The influence of entropic crowding in cell monolayers | 1.5 | 10 | Citations (PDF) |
| 39 | The in-plane, elastic-plastic response of a filled hexagonal honeycomb at finite strain | 4.8 | 21 | Citations (PDF) |
| 40 | Cell reorientation on a cyclically strained substrate | 2.5 | 14 | Citations (PDF) |
| 41 | The transport of water in a cellulose foam | 3.2 | 6 | Citations (PDF) |
| 42 | Operando visualization of kinetically induced lithium heterogeneities in single-particle layered Ni-rich cathodesJoule, 2022, 6, 2535-2546 | 23.6 | 129 | Citations (PDF) |
| 43 | The initiation of void growth during stripping of Li electrodes in solid electrolyte cells | 6.2 | 31 | Citations (PDF) |
| 44 | Nanofibril-mediated fracture resistance of bone | 1.9 | 22 | Citations (PDF) |
| 45 | Chemo-mechanical model of a cell as a stochastic active gel | 4.8 | 13 | Citations (PDF) |
| 46 | An assessment of a mechanism for void growth in Li anodes | 3.2 | 24 | Citations (PDF) |
| 47 | The in-plane elastic-plastic response of an incompressible, filled hexagonal honeycomb | 4.8 | 23 | Citations (PDF) |
| 48 | Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites | 5.4 | 124 | Citations (PDF) |
| 49 | Manipulation of the granular fluid-structure interaction via sliding coating layers | 4.6 | 1 | Citations (PDF) |
| 50 | The Influence of Strut Waviness on the Tensile Response of Lattice Materials | 1.9 | 24 | Citations (PDF) |
| 51 | Failure Modes of a Laminated Composite With Complaint Interlayers | 1.9 | 1 | Citations (PDF) |
| 52 | Three-dimensional architected materials and structures: Design, fabrication, and mechanical behavior | 3.6 | 135 | Citations (PDF) |
| 53 | Hydrogen induced fast-fracture | 4.8 | 59 | Citations (PDF) |
| 54 | The swelling of cellulose foams due to liquid transport | 4.8 | 12 | Citations (PDF) |
| 55 | Spherical indentation response of a Ni double gyroid nanolattice | 4.3 | 5 | Citations (PDF) |
| 56 | Cellular Contact Guidance Emerges from Gap Avoidance | 3.0 | 62 | Citations (PDF) |
| 57 | A versatile numerical approach for calculating the fracture toughness and R-curves of cellular materials | 4.8 | 55 | Citations (PDF) |
| 58 | Growth rate of lithium filaments in ceramic electrolytes | 7.6 | 47 | Citations (PDF) |
| 59 | Response of cells on a dense array of micro-posts | 1.2 | 6 | Citations (PDF) |
| 60 | 2020 roadmap on solid-state batteries | 2.9 | 121 | Citations (PDF) |
| 61 | Deep penetration of ultra-high molecular weight polyethylene composites by a sharp-tipped punch | 4.8 | 19 | Citations (PDF) |
| 62 | Failure mechanism maps for ultra-high molecular weight polyethylene fibre composite beams impacted by blunt projectiles | 3.0 | 33 | Citations (PDF) |
| 63 | Tunable Energy Absorption Characteristics of Architected Honeycombs Enabled via Additive Manufacturing | 5.5 | 118 | Citations (PDF) |
| 64 | High strength metallic wood from nanostructured nickel inverse opal materials | 2.7 | 44 | Citations (PDF) |
| 65 | Impulse transfer during granular matter impact with inclined sliding surfaces | 4.6 | 3 | Citations (PDF) |
| 66 | Entropic Forces Drive Cellular Contact Guidance | 1.5 | 58 | Citations (PDF) |
| 67 | High strain rate compressive response of ultra-high molecular weight polyethylene fibre composites | 10.9 | 22 | Citations (PDF) |
| 68 | A microscopically motivated model for the remodeling of cardiomyocytes | 1.7 | 6 | Citations (PDF) |
| 69 | Transient active force generation and stress fibre remodelling in cells under cyclic loading | 1.7 | 27 | Citations (PDF) |
| 70 | The role of plastic strain gradients in the crack growth resistance of metals | 4.8 | 79 | Citations (PDF) |
| 71 | Free-energy-based framework for early forecasting of stem cell differentiation | 2.1 | 10 | Citations (PDF) |
| 72 | Shear response of 3D non-woven carbon fibre reinforced composites | 4.8 | 19 | Citations (PDF) |
| 73 | Water rise in a cellulose foam: By capillary or diffusional flow? | 4.8 | 25 | Citations (PDF) |
| 74 | Response of square honeycomb core sandwich panels to granular matter impact | 4.6 | 30 | Citations (PDF) |
| 75 | Role of boundary conditions in determining cell alignment in response to stretch | 5.3 | 130 | Citations (PDF) |
| 76 | Indentation response of a 3D non-woven carbon-fibre composite | 1.9 | 5 | Citations (PDF) |
| 77 | Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites | 5.4 | 12 | Citations (PDF) |
| 78 | High intensity impact of granular matter with edge-clamped ductile plates | 4.6 | 4 | Citations (PDF) |
| 79 | Compressive response of a 3D non-woven carbon-fibre composite | 3.0 | 18 | Citations (PDF) |
| 80 | Penetration of confined ceramics targets | 3.2 | 11 | Citations (PDF) |
| 81 | Thermodynamic Modeling of the Statistics of Cell Spreading on Ligand-Coated Elastic Substrates | 1.5 | 20 | Citations (PDF) |
| 82 | Bayesian inference of the spatial distributions of material properties | 4.8 | 39 | Citations (PDF) |
| 83 | Notch sensitivity of orthotropic solids: interaction of tensile and shear damage zones | 1.9 | 9 | Citations (PDF) |
| 84 | Perforation of aluminium alloy-CFRP bilayer plates under quasi-static and impact loading | 4.6 | 14 | Citations (PDF) |
| 85 | The homeostatic ensemble for cells | 1.7 | 31 | Citations (PDF) |
| 86 | Impact of granular slugs on rigid targets: Effect of grain shape and fracture | 3.1 | 4 | Citations (PDF) |
| 87 | Effect of confinement on the static and dynamic indentation response of model ceramic and cermet materials | 4.6 | 36 | Citations (PDF) |
| 88 | Effect of surface properties on momentum transfer to targets impacted by high-velocity sand slugs | 4.6 | 15 | Citations (PDF) |
| 89 | Analysis of electro-permeation of hydrogen in metallic alloys | 1.7 | 15 | Citations (PDF) |
| 90 | Discrete dislocation plasticity analysis of the effect of interfacial diffusion on the creep response of Ni single-crystal superalloys | 7.6 | 40 | Citations (PDF) |
| 91 | Cellular mechanosensing of the biophysical microenvironment: A review of mathematical models of biophysical regulation of cell responses | 1.2 | 90 | Citations (PDF) |
| 92 | Momentum transfer during the impact of granular matter with inclined sliding surfaces | 4.8 | 5 | Citations (PDF) |
| 93 | On the Indentation Resistance of a PC Layer on PVC Foam Substrate | 2.3 | 3 | Citations (PDF) |
| 94 | Free energy analysis of cell spreading | 2.8 | 39 | Citations (PDF) |
| 95 | High intensity impulsive loading by explosively accelerated granular matter | 4.6 | 16 | Citations (PDF) |
| 96 | A discrete dislocation analysis of hydrogen-assisted mode-I fracture | 2.8 | 14 | Citations (PDF) |
| 97 | Crack kinking at the tip of a mode I crack in an orthotropic solid | 1.9 | 15 | Citations (PDF) |
| 98 | Finite versus small strain discrete dislocation analysis of cantilever bending of single crystals | 2.4 | 3 | Citations (PDF) |
| 99 | Flaw sensitivity in rate-sensitive high strength alloys: An assessment and future research directions | 3.2 | 1 | Citations (PDF) |
| 100 | The indentation response of Nickel nano double gyroid lattices | 3.2 | 40 | Citations (PDF) |
| 101 | Interfacial diffusion in high-temperature deformation of composites: A discrete dislocation plasticity investigation | 4.8 | 16 | Citations (PDF) |
| 102 | Multi-axial response of idealized cermets | 7.6 | 7 | Citations (PDF) |
| 103 | Mechanisms of the penetration of ultra-high molecular weight polyethylene composite beams | 4.6 | 57 | Citations (PDF) |
| 104 | Discrete dislocation plasticity analysis of loading rate-dependent static friction | 1.5 | 7 | Citations (PDF) |
| 105 | Prediction of Cell Alignment on Cyclically Strained Grooved Substrates | 1.5 | 17 | Citations (PDF) |
| 106 | An Integrated Stochastic Model of Matrix-Stiffness-Dependent Filopodial Dynamics | 1.5 | 38 | Citations (PDF) |
| 107 | The tensile ductility of cellular Solids: The role of imperfections | 3.0 | 52 | Citations (PDF) |
| 108 | Prediction of failure in notched carbon-fibre-reinforced-polymer laminates under multi-axial loading | 1.7 | 11 | Citations (PDF) |
| 109 | Strong cellular lattices with nitro-carburized stainless steel hollow trusses | 0.6 | 7 | Citations (PDF) |
| 110 | Climb-Enabled Discrete Dislocation Plasticity Analysis of the Deformation of a Particle Reinforced Composite | 1.9 | 16 | Citations (PDF) |
| 111 | 2013 Koiter Medal Paper: Crack-Tip Fields and Toughness of Two-Dimensional Elastoplastic Lattices | 1.9 | 62 | Citations (PDF) |
| 112 | Impulse transfer during sand impact with a cellular structure | 4.6 | 17 | Citations (PDF) |
| 113 | Effect of design on the performance of steel–alumina bilayers and trilayers subject to ballistic impact | 2.8 | 28 | Citations (PDF) |
| 114 | The Compressive Response of Idealized Cermetlike Materials | 1.9 | 8 | Citations (PDF) |
| 115 | Mechanical response of Ti–6Al–4V octet-truss lattice structures | 3.0 | 382 | Citations (PDF) |
| 116 | Simulation of the cytoskeletal response of cells on grooved or patterned substrates | 2.1 | 20 | Citations (PDF) |
| 117 | Cooperative contractility: The role of stress fibres in the regulation of cell-cell junctions | 1.6 | 14 | Citations (PDF) |
| 118 | Impulse transfer during sand impact with a solid block | 4.6 | 21 | Citations (PDF) |
| 119 | A thermodynamically motivated model for stress-fiber reorganization | 1.7 | 50 | Citations (PDF) |
| 120 | Hybrid core carbon fiber composite sandwich panels: Fabrication and mechanical response | 5.5 | 88 | Citations (PDF) |
| 121 | Non linear constitutive models for lattice materials | 4.8 | 126 | Citations (PDF) |
| 122 | Dynamic compression of square tube cellular structures | 0.6 | 4 | Citations (PDF) |
| 123 | Multi-hit armour characterisation of metal-composite bi-layers | 0.6 | 17 | Citations (PDF) |
| 124 | An analysis of competing toughening mechanisms in layered and particulate solids | 1.9 | 22 | Citations (PDF) |
| 125 | The dynamic response of edge clamped plates loaded by spherically expanding sand shells | 4.6 | 31 | Citations (PDF) |
| 126 | Mechanical response of carbon fiber composite sandwich panels with pyramidal truss cores | 6.0 | 115 | Citations (PDF) |
| 127 | Plane-strain discrete dislocation plasticity with climb-assisted glide motion of dislocations | 1.5 | 61 | Citations (PDF) |
| 128 | Simulation of the Mechanical Response of Cells on Micropost Substrates | 1.0 | 14 | Citations (PDF) |
| 129 | Unsteady penetration of a target by a liquid jet | 5.3 | 20 | Citations (PDF) |
| 130 | Design and formulation of functional pluripotent stem cell-derived cardiac microtissues | 5.3 | 289 | Citations (PDF) |
| 131 | Tubular aluminum cellular structures: fabrication and mechanical response | 0.6 | 10 | Citations (PDF) |
| 132 | Cellular contractility and substrate elasticity: a numerical investigation of the actin cytoskeleton and cell adhesion | 1.7 | 65 | Citations (PDF) |
| 133 | Dynamic Interaction between Manipulator and Omni-Directional Platform | 0.0 | 0 | Citations (PDF) |
| 134 | Sandwich Beams With Corrugated and Y-frame Cores: Does the Back Face Contribute to the Bending Response? | 1.9 | 17 | Citations (PDF) |
| 135 | The effect of remodelling and contractility of the actin cytoskeleton on the shear resistance of single cells: a computational and experimental investigation | 2.1 | 48 | Citations (PDF) |
| 136 | Damage development in an armor alumina impacted with ductile metal spheres | 0.6 | 20 | Citations (PDF) |
| 137 | The influence of matrix integrity on stress-fiber remodeling in 3D | 9.7 | 96 | Citations (PDF) |
| 138 | Numerical investigation of the active role of the actin cytoskeleton in the compression resistance of cells | 2.8 | 71 | Citations (PDF) |
| 139 | Contact area and size effects in discrete dislocation modeling of wedge indentation | 1.9 | 28 | Citations (PDF) |
| 140 | Damage Development in an Armor Ceramic Under Quasi‐Static Indentation | 3.2 | 22 | Citations (PDF) |
| 141 | Explorations of Hybrid Sandwich Panel Concepts for Projectile Impact Mitigation | 3.2 | 68 | Citations (PDF) |
| 142 | A Constitutive Description of the Inelastic Response of Ceramics | 3.2 | 59 | Citations (PDF) |
| 143 | Collapse mechanism maps for a hollow pyramidal lattice | 1.5 | 47 | Citations (PDF) |
| 144 | An Analysis of the Cooperative Mechano-Sensitive Feedback Between Intracellular Signaling, Focal Adhesion Development, and Stress Fiber Contractility | 1.9 | 25 | Citations (PDF) |
| 145 | Quasi-Static Three-Point Bending of Carbon Fiber Sandwich Beams With Square Honeycomb Cores | 1.9 | 100 | Citations (PDF) |
| 146 | Dynamic compressive response of composite corrugated cores | 0.6 | 31 | Citations (PDF) |
| 147 | Micro-architectured materials: past, present and future | 1.5 | 775 | Citations (PDF) |
| 148 | The Dynamic Strength of a Representative Double Layer Prismatic Core: A Combined Experimental, Numerical, and Analytical Assessment | 1.9 | 10 | Citations (PDF) |
| 149 | Triaxial Deformation Behavior of Bituminous Mixes | 1.9 | 20 | Citations (PDF) |
| 150 | The Through-Thickness Compressive Strength of a Composite Sandwich Panel With a Hierarchical Square Honeycomb Sandwich Core | 1.9 | 76 | Citations (PDF) |
| 151 | Microfabricated tissue gauges to measure and manipulate forces from 3D microtissues | 5.3 | 441 | Citations (PDF) |
| 152 | The Influence of
Material Properties and Confinement on the Dynamic Penetration of Alumina by Hard
Spheres | 1.9 | 14 | Citations (PDF) |
| 153 | Simulation of the contractile response of cells on an array of micro-posts | 1.7 | 83 | Citations (PDF) |
| 154 | The effect of shape on the adhesion of fibrillar surfaces | 6.8 | 143 | Citations (PDF) |
| 155 | Impact response of sandwich plates with a pyramidal lattice core | 4.6 | 113 | Citations (PDF) |
| 156 | Plasticity size effects in voided crystals | 4.8 | 45 | Citations (PDF) |
| 157 | A bio-mechanical model for coupling cell contractility with focal adhesion formation | 4.8 | 155 | Citations (PDF) |
| 158 | Inelastic deformation and energy dissipation in ceramics: A mechanism-based constitutive model | 4.8 | 169 | Citations (PDF) |
| 159 | Mechanisms and Mechanics Governing the Indentation of Polycrystalline Alumina | 3.2 | 9 | Citations (PDF) |
| 160 | The simulation of stress fibre and focal adhesion development in cells on patterned substrates | 2.1 | 111 | Citations (PDF) |
| 161 | Analysis and Interpretation of Stress Fiber Organization in Cells Subject to Cyclic Stretch | 1.0 | 76 | Citations (PDF) |
| 162 | Quasistatic deformation and failure modes of composite square honeycombs | 0.6 | 137 | Citations (PDF) |
| 163 | The compressive response of carbon fiber composite pyramidal truss sandwich cores | 0.6 | 218 | Citations (PDF) |
| 164 | Truss waviness effects in cellular lattice structures | 0.6 | 32 | Citations (PDF) |
| 165 | Size effects in single asperity frictional contacts | 1.5 | 17 | Citations (PDF) |
| 166 | A model for the contractility of the cytoskeleton including the effects of stress-fibre formation and dissociation | 1.5 | 99 | Citations (PDF) |
| 167 | Dynamic failure of clamped circular plates subjected to an underwater shock | 0.6 | 23 | Citations (PDF) |
| 168 | Continuum-based computational models for cell and nuclear mechanics | 0.6 | 16 | Citations (PDF) |
| 169 | Structural response of pyramidal core sandwich columns | 3.0 | 122 | Citations (PDF) |
| 170 | Fatigue performance of sandwich beams with a pyramidal core | 5.2 | 49 | Citations (PDF) |
| 171 | The shear response of metallic square honeycombs | 0.6 | 43 | Citations (PDF) |
| 172 | Performance of metallic honeycomb-core sandwich beams under shock loading | 3.0 | 187 | Citations (PDF) |
| 173 | Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis | 1.5 | 102 | Citations (PDF) |
| 174 | A bio-chemo-mechanical model for cell contractility | 5.3 | 280 | Citations (PDF) |
| 175 | One-dimensional response of sandwich plates to underwater shock loading | 4.8 | 221 | Citations (PDF) |
| 176 | Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials | 0.8 | 19 | Citations (PDF) |
| 177 | Phenomenological Model for Monotonic and Cyclic Behavior of Pure Bitumen | 1.9 | 23 | Citations (PDF) |
| 178 | Monotonic and cyclic behaviour of polymer-modified bitumens | 2.3 | 4 | Citations (PDF) |
| 179 | Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium | 7.6 | 355 | Citations (PDF) |
| 180 | Micromechanical Modeling of Steady-State Deformation in Asphalt | 1.9 | 10 | Citations (PDF) |
| 181 | Case 2-2003 | 19.4 | 10 | Citations (PDF) |
| 182 | A discrete dislocation analysis of fatigue crack growth | 0.3 | 0 | Citations (PDF) |
| 183 | Uniaxial Experiments on Idealized Asphalt Mixes | 1.9 | 38 | Citations (PDF) |
| 184 | Models of Particle Reinforced Nonlinear-Viscous Composite | 1.9 | 10 | Citations (PDF) |
| 185 | Vacancy Diffusion during Stripping of Metal Electrodes | 2.3 | 0 | Citations (PDF) |
| 186 | High-speed X-ray tomography for 4D imaging | 5.3 | 3 | Citations (PDF) |
| 187 | Interparticle Communication and Lithium Dynamics in Faceted Nickel-Rich NMC Cathodes | 12.1 | 4 | Citations (PDF) |
| 188 | Hardness and compression-induced cracking of lithium nickel oxide (LNO) secondary particles in a Li-ion battery | 7.6 | 0 | Citations (PDF) |
| 189 | Mechanisms of size effects in elastic architected solids | 7.6 | 0 | Citations (PDF) |
| 190 | Contact loss in all-solid-state Li-ion batteries via deposition of impurities | 23.6 | 0 | Citations (PDF) |
