| 1 | Examining whether normal stress affects deformation twinning | 13.6 | 2 | Citations (PDF) |
| 2 | Superplasticity in Severely Deformed High-Entropy Alloys | 0.3 | 0 | Citations (PDF) |
| 3 | Indentation size effects and its relevance to ultrafine-grained materials | 6.3 | 7 | Citations (PDF) |
| 4 | Corrosion performance of Al-6061 alloy after high-pressure torsion processing | 5.0 | 2 | Citations (PDF) |
| 5 | Flow stress softening and deformation mechanism under competition of current density and strain rate in basket structured high‐entropy alloy | 11.2 | 4 | Citations (PDF) |
| 6 | Self-annealing behavior of an Mg-Dy alloy processed by high-pressure torsion | 2.7 | 2 | Citations (PDF) |
| 7 | Characterization of Cu-Nb-Cu heterostructure fabricated by high-pressure torsion | 6.0 | 7 | Citations (PDF) |
| 8 | Enhanced thermal stability of nanocrystalline Cu composites processed by high-pressure torsion: The pinning effect of Al₂O₃, GO, and rGO/Al₂O₃ nanoparticles | 6.0 | 6 | Citations (PDF) |
| 9 | Severe Plastic Deformation of Ceramics by High-Pressure Torsion: Review of Principles and Applications | 9.4 | 24 | Citations (PDF) |
| 10 | The significance of crystal structure on grain refinement during severe plastic deformation | 3.4 | 4 | Citations (PDF) |
| 11 | Recent advances in using severe plastic deformation for the processing of nanomaterials | 5.0 | 4 | Citations (PDF) |
| 12 | A study of die parameters influencing the plastic deformation for 3D finite element simulations of equal-channel angular pressing | 3.4 | 1 | Citations (PDF) |
| 13 | An EBSD analysis of a commercial immiscible Cu43%Cr alloy after high-pressure torsion processing and annealing | 1.6 | 3 | Citations (PDF) |
| 14 | Corrigendum to article “Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes” [J. Alloy. Compd. 968 (2023) 171928] | 6.0 | 0 | Citations (PDF) |
| 15 | Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion | 6.3 | 15 | Citations (PDF) |
| 16 | Estimating dislocation density from electron backscatter diffraction data for an AZ31/Mg-0.6Gd hybrid alloy fabricated by high-pressure torsion | 1.6 | 6 | Citations (PDF) |
| 17 | Primary recrystallization of a magnesium hybrid material fabricated by high-pressure torsion | 2.2 | 1 | Citations (PDF) |
| 18 | Correlation between microstructure, magnetic properties and mechanical behavior of the Permimphy alloy after high-pressure torsion | 3.4 | 2 | Citations (PDF) |
| 19 | The role of grain size in achieving excellent properties in structural materials | 6.1 | 31 | Citations (PDF) |
| 20 | Texture and microstructural evolution in an Al-6061 alloy processed by high-pressure torsion | 5.0 | 9 | Citations (PDF) |
| 21 | Recrystallization and grain growth activation energies in a hybrid magnesium material fabricated by high-pressure torsion | 3.4 | 2 | Citations (PDF) |
| 22 | Mechanisms of Low-Temperature Dislocation Motion in High-Entropy Al0.5CoCrCuFeNi Alloy | 2.3 | 3 | Citations (PDF) |
| 23 | Deformation-induced martensitic transformations: A strategy for overcoming the strength-ductility trade-off in high-entropy alloys | 12.3 | 26 | Citations (PDF) |
| 24 | Defect Microstructure Evolution in an Immiscible Composite Cu43%Cr Alloy After High-Pressure Torsion and Annealing Using Positron Annihilation Spectroscopy | 3.3 | 0 | Citations (PDF) |
| 25 | Improving the strength and surface properties of TNTZ alloy through a combination of high-pressure torsion and laser surface treatment | 2.7 | 2 | Citations (PDF) |
| 26 | The influence of graphene oxide on the microstructure and properties of ultrafine-grained copper processed by high-pressure torsion | 6.0 | 5 | Citations (PDF) |
| 27 | DSC analysis of dissolution reaction in an as-cast and HPT-processed Mg-Gd alloy | 2.5 | 3 | Citations (PDF) |
| 28 | The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion | 6.3 | 4 | Citations (PDF) |
| 29 | Graphene-reinforced metal matrix composites produced by high-pressure torsion: a review | 3.4 | 12 | Citations (PDF) |
| 30 | Fracture mechanism of electrically-assisted micro-tension in nanostructured titanium using synchrotron radiation X-ray tomography | 5.4 | 13 | Citations (PDF) |
| 31 | Modification of the Hall-Petch relationship for submicron-grained fcc metals | 6.3 | 44 | Citations (PDF) |
| 32 | Evidence for two-stage hardening in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion | 6.0 | 17 | Citations (PDF) |
| 33 | The thermal instability mechanism and annealed deformation behavior of Cu/Nb nanolaminate composites | 13.6 | 22 | Citations (PDF) |
| 34 | Investigation of Microstructure and Texture Evolution in an AZ31/Mg–Gd Alloy Hybrid Metal Fabricated by High‐Pressure Torsion | 2.9 | 14 | Citations (PDF) |
| 35 | Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering | 6.1 | 148 | Citations (PDF) |
| 36 | Breaks in the Hall–Petch Relationship after Severe Plastic Deformation of Magnesium, Aluminum, Copper, and Iron | 2.1 | 60 | Citations (PDF) |
| 37 | An Overview on the Effect of Severe Plastic Deformation on the Performance of Magnesium for Biomedical Applications | 2.9 | 41 | Citations (PDF) |
| 38 | Influence of processing temperature on microhardness evolution, microstructure and superplastic behaviour in an Al–Mg alloy processed by high-pressure torsion | 6.1 | 25 | Citations (PDF) |
| 39 | A Conceptual Framework Towards the Realization of In situ Monitoring
and Control of End-to-End Additive Manufacturing Process | 0.7 | 1 | Citations (PDF) |
| 40 | Evaluation of Thermal Stability and Its Effect on the Corrosion Behaviour of Mg-RE Alloys Processed by High-Pressure Torsion | 2.1 | 11 | Citations (PDF) |
| 41 | Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress | 35.7 | 285 | Citations (PDF) |
| 42 | Characterization of defect microstructure in MgRE (RE=Ce, Nd) alloys after processing by high-pressure torsion using positron annihilation spectroscopy and a high resolution X-ray diffraction | 2.7 | 1 | Citations (PDF) |
| 43 | Microhardness and Microstructural Evolution of Pure Nickel Processed by High-Pressure Torsion | 2.1 | 12 | Citations (PDF) |
| 44 | Significance of adiabatic heating on phase transformation in titanium-based alloys during severe plastic deformation | 5.0 | 16 | Citations (PDF) |
| 45 | Tube High-Pressure Shearing: A Simple Shear Path to Unusual Microstructures and Unprecedented Properties | 1.2 | 9 | Citations (PDF) |
| 46 | Influence of bimetal interface confinement on the Hall-petch slope of multiscale Cu/Nb multilayer composites | 3.2 | 12 | Citations (PDF) |
| 47 | Tailoring a high-strength Al–4Cu alloy through processing of powders by up to 100 turns of high-pressure torsion | 6.3 | 5 | Citations (PDF) |
| 48 | Cryo-Severe Plastic Deformation, Microstructures and Properties of Metallic Nanomaterials at Low Temperatures | 1.2 | 14 | Citations (PDF) |
| 49 | Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg‒Zn alloys | 11.3 | 62 | Citations (PDF) |
| 50 | Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes | 6.0 | 13 | Citations (PDF) |
| 51 | Flow behaviour and microstructural stability in an Al–3Mg-0.2Sc alloy processed by high-pressure torsion at different temperatures | 6.3 | 2 | Citations (PDF) |
| 52 | A Comparative Study Between AZ31 and Mg-Gd Alloys After High-Pressure Torsion | 1.6 | 9 | Citations (PDF) |
| 53 | Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system | 0.7 | 3 | Citations (PDF) |
| 54 | Review: recent advances using severe plastic deformation to improve the properties of battery materials | 3.4 | 18 | Citations (PDF) |
| 55 | Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review | 11.3 | 217 | Citations (PDF) |
| 56 | Exploiting tube high-pressure shearing to prepare a microstructure in Pb-Sn alloys for unprecedented superplasticity | 5.4 | 15 | Citations (PDF) |
| 57 | Texture evolution in high-pressure torsion processing | 35.7 | 100 | Citations (PDF) |
| 58 | Microstructure and mechanical properties of an Fe–Mn–Al–C lightweight steel after dynamic plastic deformation processing and subsequent aging | 6.3 | 17 | Citations (PDF) |
| 59 | Fabrication of hybrid nanocrystalline Al–Ti alloys by mechanical bonding through high-pressure torsion | 6.3 | 17 | Citations (PDF) |
| 60 | Using Plane Strain Compression Test to Evaluate the Mechanical Behavior of Magnesium Processed by HPT | 2.3 | 20 | Citations (PDF) |
| 61 | Effect of creep parameters on the steady-state flow stress of pure metals processed by high-pressure torsion | 6.3 | 21 | Citations (PDF) |
| 62 | Effect of grain size on strength and strain rate sensitivity in metals | 3.4 | 61 | Citations (PDF) |
| 63 | Achieving an excellent combination of strength and plasticity in a low carbon steel through dynamic plastic deformation and subsequent annealing | 6.3 | 14 | Citations (PDF) |
| 64 | Relationship between strength and uniform elongation of metals based on an exponential hardening law | 8.7 | 51 | Citations (PDF) |
| 65 | A general physics-based hardening law for single phase metals | 8.7 | 26 | Citations (PDF) |
| 66 | Examining the effect of the aging state on strength and plasticity of wrought aluminum alloys | 13.6 | 57 | Citations (PDF) |
| 67 | Using Severe Plastic Deformation to Produce Nanostructured Materials with Superior Properties | 9.4 | 106 | Citations (PDF) |
| 68 | Formation of ultrafine grains and twins in the β-phase during superplastic deformation of two-phase brasses | 5.4 | 8 | Citations (PDF) |
| 69 | Study on the Surface Modification of Nanostructured Ti Alloys and Coarse-Grained Ti Alloys | 2.3 | 17 | Citations (PDF) |
| 70 | Effects of heat treatment on the corrosion behavior and mechanical properties of biodegradable Mg alloys | 11.3 | 136 | Citations (PDF) |
| 71 | Achieving Superplastic Elongations in an AZ80 Magnesium Alloy Processed by High‐Pressure Torsion | 2.9 | 7 | Citations (PDF) |
| 72 | An Evaluation of the Mechanical Properties, Microstructures, and Strengthening Mechanisms of Pure Mg Processed by High‐Pressure Torsion at Different Temperatures | 2.9 | 18 | Citations (PDF) |
| 73 | Heterostructured stainless steel: Properties, current trends, and future perspectives | 24.8 | 227 | Citations (PDF) |
| 74 | Evaluation of texture weakening and microstructural evolution in an Fe–10Ni–7Mn martensitic steel severely deformed by six turns of high-pressure torsion | 6.3 | 15 | Citations (PDF) |
| 75 | Structure and low-temperature micromechanical properties of as-cast and SPD-processed high-entropy Co25−xCr25Fe25Ni25Cx alloys | 0.7 | 7 | Citations (PDF) |
| 76 | Strength and Fatigue Life at 625 K of the Ultrafine-Grained Ti-6Al-4V Alloy Produced by Equal-Channel Angular Pressing | 2.3 | 5 | Citations (PDF) |
| 77 | Grain Size Tailoring to Control Strain Hardening and Improve the Mechanical Properties of a CoCrFeNiMn High-Entropy Alloy | 2.6 | 20 | Citations (PDF) |
| 78 | Effect of grain size on strength and strain rate sensitivity in the CrMnFeCoNi high-entropy alloy | 6.1 | 34 | Citations (PDF) |
| 79 | Microstructure evolution and mechanical response of a boron-modified Ti–6Al–4V alloy during high-pressure torsion processing | 6.3 | 14 | Citations (PDF) |
| 80 | Evidence for a stable single component sharp texture in high purity aluminum during tube high-pressure shearing at room temperature | 3.4 | 5 | Citations (PDF) |
| 81 | Advances in Superplasticity from a Laboratory Curiosity to the Development of a Superplastic Forming Industry | 2.3 | 22 | Citations (PDF) |
| 82 | Using high-pressure torsion to fabricate an Al–Ti hybrid system with exceptional mechanical properties | 6.3 | 14 | Citations (PDF) |
| 83 | Evaluating the paradox of strength and ductility in ultrafine-grained oxygen-free copper processed by ECAP at room temperature | 6.3 | 37 | Citations (PDF) |
| 84 | Phase evolution and mechanical properties of an intercritically-annealed Fe–10Ni–7Mn (wt. %) martensitic steel severely deformed by high-pressure torsion | 6.3 | 8 | Citations (PDF) |
| 85 | The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe–Ni–Mn shape memory alloy | 6.3 | 10 | Citations (PDF) |
| 86 | An examination of microstructural evolution in a Pb–Sn eutectic alloy processed by high-pressure torsion and subsequent self-annealing | 6.3 | 8 | Citations (PDF) |
| 87 | A stored energy analysis of grains with shear texture orientations in Cu-Ni-Si and Fe-Ni alloys processed by high-pressure torsion | 6.0 | 39 | Citations (PDF) |
| 88 | Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment | 6.3 | 9 | Citations (PDF) |
| 89 | In situ TEM observations of thickness effect on grain growth in pure titanium thin films | 5.0 | 10 | Citations (PDF) |
| 90 | An examination of microstructural evolution and homogeneity in a magnesium AZ80 alloy processed by high-pressure torsion | 6.3 | 12 | Citations (PDF) |
| 91 | Abnormal grain growth in a Zn-0.8Ag alloy after processing by high-pressure torsion | 8.7 | 67 | Citations (PDF) |
| 92 | Sustainable fabrication of Cu/Nb composites with continuous laminated structure to achieve ultrahigh strength and excellent electrical conductivity | 12.8 | 77 | Citations (PDF) |
| 93 | Advanced Materials for Mechanical Engineering: Ultrafine‐Grained Alloys with Multilayer Coatings | 2.9 | 10 | Citations (PDF) |
| 94 | Micro-mechanical response of ultrafine grain and nanocrystalline tantalum | 6.1 | 11 | Citations (PDF) |
| 95 | Evidence for a phase transition in an AlCrFe2Ni2 high entropy alloy processed by high-pressure torsion | 6.0 | 31 | Citations (PDF) |
| 96 | Effect of grain size and crystallographic structure on the corrosion and tribocorrosion behaviour of a CoCrMo biomedical grade alloy in simulated body fluidWear, 2021, 478-479, 203884 | 3.5 | 9 | Citations (PDF) |
| 97 | A multiscale experimental analysis of mechanical properties and deformation behavior of sintered copper–silicon carbide composites enhanced by high-pressure torsion | 3.8 | 12 | Citations (PDF) |
| 98 | The nature of the maximum microhardness and thickness of the gradient layer in surface-strengthened Cu-Al alloys | 8.7 | 27 | Citations (PDF) |
| 99 | Deformation mechanisms in ultrafine-grained metals with an emphasis on the Hall–Petch relationship and strain rate sensitivity | 6.1 | 115 | Citations (PDF) |
| 100 | An examination of strain weakening and self-annealing in a Bi-Sn alloy processed by high-pressure torsion | 2.5 | 4 | Citations (PDF) |
| 101 | Effect of post-deformation annealing on the microstructure and mechanical behavior of an Fe–Ni–Mn steel processed by high-pressure torsion | 6.1 | 6 | Citations (PDF) |
| 102 | The mechanics and physics of gradient nanomaterials: Dedicated to the memory of Alexander Zhilyaev (1959–2020) | 2.5 | 0 | Citations (PDF) |
| 103 | Microstructural Evolution and Tensile Testing of a Bi–Sn (57/43) Alloy Processed by Tube High-Pressure Shearing | 2.1 | 9 | Citations (PDF) |
| 104 | Creep behavior of metals processed by equal-channel angular pressing | 0.2 | 5 | Citations (PDF) |
| 105 | Correlation between shear punch and tensile measurements for an AZ31 Mg alloy processed by equal-channel angular pressing | 0.2 | 4 | Citations (PDF) |
| 106 | Numerical Investigation of Plastic Strain Homogeneity during Equal-Channel Angular Pressing of a Cu-Zr Alloy | 2.1 | 7 | Citations (PDF) |
| 107 | On the Heterogeneity of Local Shear Strain Induced by High‐Pressure Torsion | 2.9 | 21 | Citations (PDF) |
| 108 | Inverse Hall–Petch Behaviour in an AZ91 Alloy and in an AZ91–Al2O3 Composite Consolidated by High‐Pressure Torsion | 2.9 | 22 | Citations (PDF) |
| 109 | Effect of Cu on Amorphization of a TiNi Alloy during HPT and Shape Memory Effect after Post‐Deformation Annealing | 2.9 | 14 | Citations (PDF) |
| 110 | Effect of Numbers of Turns of High‐Pressure Torsion on the Development of Exceptional Ductility in Pure Magnesium | 2.9 | 13 | Citations (PDF) |
| 111 | The Stability of Oxygen‐Free Copper Processed by High‐Pressure Torsion after Room Temperature Storage for 12 Months | 2.9 | 4 | Citations (PDF) |
| 112 | A Comparison of Warm and Combined Warm and Low‐Temperature Processing Routes for the Equal‐Channel Angular Pressing of Pure Titanium | 2.9 | 5 | Citations (PDF) |
| 113 | An Evaluation of the Microstructure and Microhardness in an Al–Zn–Mg Alloy Processed by ECAP and Post‐ECAP Heat Treatments | 2.9 | 6 | Citations (PDF) |
| 114 | An investigation of the stored energy and thermal stability in a Cu–Ni–Si alloy processed by high-pressure torsion | 1.6 | 28 | Citations (PDF) |
| 115 | Microstructural Evolution and Mechanical Behavior of Cu/Nb Multilayer Composites Processed by Accumulative Roll Bonding | 2.9 | 38 | Citations (PDF) |
| 116 | Synthesis of Hybrid Nanocrystalline Alloys by Mechanical Bonding through High‐Pressure Torsion | 2.9 | 45 | Citations (PDF) |
| 117 | The significance of strain weakening and self-annealing in a superplastic Bi–Sn eutectic alloy processed by high-pressure torsion | 8.7 | 34 | Citations (PDF) |
| 118 | Microstructure and Microhardness Evolution in Pure Molybdenum Processed by High‐Pressure Torsion | 2.9 | 4 | Citations (PDF) |
| 119 | Development of an Al 7050-10 vol.% alumina nanocomposite through cold consolidation of particles by high-pressure torsion | 6.1 | 10 | Citations (PDF) |
| 120 | Corrosion Behavior in Hank's Solution of a Magnesium–Hydroxyapatite Composite Processed by High‐Pressure Torsion | 2.9 | 14 | Citations (PDF) |
| 121 | Superior strength of tri-layered Al–Cu–Al nano-composites processed by high-pressure torsion | 6.0 | 28 | Citations (PDF) |
| 122 | Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system | 6.3 | 19 | Citations (PDF) |
| 123 | Microstructural and Hardness Evolution in a Duplex Stainless Steel Processed by High-Pressure Torsion | 2.1 | 8 | Citations (PDF) |
| 124 | Analysis of the creep behavior of fine-grained AZ31 magnesium alloy | 6.3 | 30 | Citations (PDF) |
| 125 | Recrystallization in an Mg-Nd alloy processed by high-pressure torsion: a calorimetric analysis | 6.1 | 12 | Citations (PDF) |
| 126 | Microstructural Evolution and Mechanical Properties of Ultrafine‐Grained Ti Fabricated by Cryorolling and Subsequent Annealing | 2.9 | 8 | Citations (PDF) |
| 127 | The fabrication of high strength Zr/Nb nanocomposites using high-pressure torsion | 6.3 | 11 | Citations (PDF) |
| 128 | Using High-Pressure Torsion to Achieve Superplasticity in an AZ91 Magnesium Alloy | 2.3 | 27 | Citations (PDF) |
| 129 | Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy | 6.3 | 43 | Citations (PDF) |
| 130 | Enhanced Creep Resistance of an Ultrafine‐Grained Ti–6Al–4V Alloy with Modified Surface by Ion Implantation and (Ti + V)N Coating | 2.9 | 7 | Citations (PDF) |
| 131 | Microstructural Evolution and Microhardness Variations in Pure Titanium Processed by High‐Pressure Torsion | 2.9 | 24 | Citations (PDF) |
| 132 | An Investigation of Strain‐Softening Phenomenon in Al–0.1% Mg Alloy during High‐Pressure Torsion Processing | 2.9 | 0 | Citations (PDF) |
| 133 | Interface structures in Al-Nb2O5 nanocomposites processed by high-pressure torsion at room temperature | 5.0 | 10 | Citations (PDF) |
| 134 | An investigation by EXAFS of local atomic structure in an Mg-Nd alloy after processing by high-pressure torsion and ageing | 2.5 | 4 | Citations (PDF) |
| 135 | Characteristics of grain refinement in oxygen-free copper processed by equal-channel angular pressing and dynamic testing | 6.3 | 25 | Citations (PDF) |
| 136 | Fabrication and characterization of nanostructured immiscible Cu–Ta alloys processed by high-pressure torsion | 6.0 | 28 | Citations (PDF) |
| 137 | A Novel High-Strength Zn-3Ag-0.5Mg Alloy Processed by Hot Extrusion, Cold Rolling, or High-Pressure Torsion | 2.1 | 46 | Citations (PDF) |
| 138 | Microstructure and mechanical properties of a Zn-0.5Cu alloy processed by high-pressure torsion | 6.3 | 45 | Citations (PDF) |
| 139 | Cytotoxicity and Corrosion Behavior of Magnesium and Magnesium Alloys in Hank's Solution after Processing by High‐Pressure Torsion | 2.9 | 48 | Citations (PDF) |
| 140 | A magnesium-aluminium composite produced by high-pressure torsion | 6.0 | 38 | Citations (PDF) |
| 141 | Thermal Stability of an Mg–Nd Alloy Processed by High‐Pressure Torsion | 2.9 | 29 | Citations (PDF) |
| 142 | Magnesium-Based Bioactive Composites Processed at Room Temperature | 2.9 | 17 | Citations (PDF) |
| 143 | Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite | 6.3 | 42 | Citations (PDF) |
| 144 | On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion | 6.3 | 26 | Citations (PDF) |
| 145 | A possible stabilizing effect of work hardening on the tensile performance of superplastic materials | 6.3 | 7 | Citations (PDF) |
| 146 | Electrochemical behavior of a magnesium ZK60 alloy processed by high-pressure torsion | 8.1 | 80 | Citations (PDF) |
| 147 | Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP | 6.0 | 32 | Citations (PDF) |
| 148 | An investigation of the thermal stability of an Mg Dy alloy after processing by high-pressure torsion | 5.0 | 21 | Citations (PDF) |
| 149 | Micro‐Embossing Formability of a Superlight Dual‐Phase Mg–Li Alloy Processed by High‐Pressure Torsion | 2.9 | 10 | Citations (PDF) |
| 150 | Effect of Long‐Term Storage on Microstructure and Microhardness Stability in OFHC Copper Processed by High‐Pressure Torsion | 2.9 | 11 | Citations (PDF) |
| 151 | Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg | 3.4 | 36 | Citations (PDF) |
| 152 | Thirty years of collaboration and research from 1989 to 2019: a tribute to Ruslan Z. Valiev | 0.5 | 0 | Citations (PDF) |
| 153 | Processing Magnesium and Its Alloys by High‐Pressure Torsion: An Overview | 2.9 | 63 | Citations (PDF) |
| 154 | Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion | 6.0 | 42 | Citations (PDF) |
| 155 | The Effect of High‐Pressure Torsion on Microstructure, Hardness and Corrosion Behavior for Pure Magnesium and Different Magnesium Alloys | 2.9 | 51 | Citations (PDF) |
| 156 | Processing of CP-Ti by high-pressure torsion and the effect of surface modification using a post-HPT laser treatment | 6.0 | 24 | Citations (PDF) |
| 157 | The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion | 8.7 | 162 | Citations (PDF) |
| 158 | Development of a magnesium-alumina composite through cold consolidation of machining chips by high-pressure torsion | 6.0 | 46 | Citations (PDF) |
| 159 | Developing magnesium-based composites through high-pressure torsion | 0.6 | 8 | Citations (PDF) |
| 160 | Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution | 1.0 | 7 | Citations (PDF) |
| 161 | The influence of chemical heterogeneities on the local mechanical behavior of a high-entropy alloy: A micropillar compression study | 6.3 | 14 | Citations (PDF) |
| 162 | Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion | 6.3 | 84 | Citations (PDF) |
| 163 | Factors influencing superplasticity in the Ti-6Al-4V alloy processed by high-pressure torsion | 6.3 | 41 | Citations (PDF) |
| 164 | An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature | 6.0 | 24 | Citations (PDF) |
| 165 | Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion | 6.3 | 46 | Citations (PDF) |
| 166 | Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy | 6.3 | 108 | Citations (PDF) |
| 167 | Fracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP | 6.3 | 53 | Citations (PDF) |
| 168 | Effect of temperature rise on microstructural evolution during high-pressure torsion | 6.3 | 104 | Citations (PDF) |
| 169 | Features of Duplex Microstructural Evolution and Mechanical Behavior in the Titanium Alloy Processed by Equal‐Channel Angular Pressing | 2.9 | 13 | Citations (PDF) |
| 170 | Effect of heat treatments on the microstructures and tensile properties of an ultrafine-grained Al-Zn-Mg alloy processed by ECAP | 6.0 | 38 | Citations (PDF) |
| 171 | Using Post‐Deformation Annealing to Optimize the Properties of a ZK60 Magnesium Alloy Processed by High‐Pressure Torsion | 2.9 | 18 | Citations (PDF) |
| 172 | Effect of Initial Annealing Temperature on Microstructural Development and Microhardness in High‐Purity Copper Processed by High‐Pressure Torsion | 2.9 | 8 | Citations (PDF) |
| 173 | Characterization of precipitates in an Al-Zn-Mg alloy processed by ECAP and subsequent annealing | 6.3 | 54 | Citations (PDF) |
| 174 | Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing | 2.5 | 38 | Citations (PDF) |
| 175 | Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion | 6.3 | 34 | Citations (PDF) |
| 176 | An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: A comparison of Al and Mg alloys | 6.3 | 28 | Citations (PDF) |
| 177 | Studies on the Superplasticity Effect in UFA: History and Development (In Memory of Prof. O.A. Kaibyshev) | 2.8 | 2 | Citations (PDF) |
| 178 | Superplasticity in Ultrafine-Grained Materials. | 2.8 | 36 | Citations (PDF) |
| 179 | Microstructure evolution of Al-7wt%Si-2wt%Fe alloy processed by high-pressure torsion | 0.3 | 0 | Citations (PDF) |
| 180 | Effect of carbon content and annealing on structure and hardness of CrFe2NiMnV0.25 high-entropy alloys processed by high-pressure torsion | 3.4 | 28 | Citations (PDF) |
| 181 | Annealing‐Induced Hardening in Ultrafine‐Grained Ni–Mo Alloys | 2.9 | 31 | Citations (PDF) |
| 182 | Grain refinement and superplastic flow in a fully lamellar Ti-6Al-4V alloy processed by high-pressure torsion | 6.3 | 43 | Citations (PDF) |
| 183 | Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing | 6.3 | 23 | Citations (PDF) |
| 184 | Spall strength dependence on grain size and strain rate in tantalum | 8.7 | 156 | Citations (PDF) |
| 185 | Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments | 6.0 | 56 | Citations (PDF) |
| 186 | Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg | 3.4 | 53 | Citations (PDF) |
| 187 | Fabrication of nanocomposites through diffusion bonding under high-pressure torsion | 2.5 | 56 | Citations (PDF) |
| 188 | Direct Bonding of Aluminum–Copper Metals through High‐Pressure Torsion Processing | 2.9 | 36 | Citations (PDF) |
| 189 | Fabrication of High Strength Hybrid Materials through the Application of High-Pressure Torsion | 0.4 | 4 | Citations (PDF) |
| 190 | Developments in superplasticity over the last three decades with emphasis on research in Ufa | 0.6 | 0 | Citations (PDF) |
| 191 | Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion | 6.3 | 112 | Citations (PDF) |
| 192 | Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate | 6.3 | 72 | Citations (PDF) |
| 193 | Shear fracture mechanism in micro-tension of an ultrafine-grained pure copper using synchrotron radiation X-ray tomography | 5.4 | 27 | Citations (PDF) |
| 194 | Effect of severe plastic deformation on the biocompatibility and corrosion rate of pure magnesium | 3.4 | 90 | Citations (PDF) |
| 195 | Effect of Mo addition on the microstructure and hardness of ultrafine-grained Ni alloys processed by a combination of cryorolling and high-pressure torsion | 6.3 | 23 | Citations (PDF) |
| 196 | Mechanical behavior and microstructure properties of titanium powder consolidated by high-pressure torsion | 6.3 | 51 | Citations (PDF) |
| 197 | Mechanical behavior and impact toughness of the ultrafine-grained Grade 5 Ti alloy processed by ECAP | 6.3 | 43 | Citations (PDF) |
| 198 | The sequence and kinetics of pre-precipitation in Mg-Nd alloys after HPT processing: A synchrotron and DSC study | 6.0 | 22 | Citations (PDF) |
| 199 | Evolution of the microstructure during annealing of ultrafine-grained Ni with different Mo contents | 5.0 | 10 | Citations (PDF) |
| 200 | Hardening and thermal stability of a nanocrystalline CoCrFeNiMnTi0.1 high-entropy alloy processed by high-pressure torsion | 0.5 | 11 | Citations (PDF) |
| 201 | Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy | 3.4 | 32 | Citations (PDF) |
| 202 | Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy Alloy processed by High-Pressure Torsion | 6.0 | 126 | Citations (PDF) |
| 203 | Orientation imaging microscopy and microhardness in a ZK60 magnesium alloy processed by high-pressure torsion | 6.0 | 53 | Citations (PDF) |
| 204 | Microstructural Evolution and Properties of a Hot Extruded and HPT‐Processed Resorbable Magnesium WE43 Alloy | 2.9 | 13 | Citations (PDF) |
| 205 | Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy | 6.3 | 47 | Citations (PDF) |
| 206 | Influence of grain boundary misorientations on the mechanical behavior of a near-α Ti-6Al-7Nb alloy processed by ECAP | 2.5 | 20 | Citations (PDF) |
| 207 | Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion | 6.3 | 64 | Citations (PDF) |
| 208 | The potential for achieving superplasticity in high-entropy alloys processed by severe plastic deformation | 0.5 | 9 | Citations (PDF) |
| 209 | High-pressure torsion-induced phase transformations and grain refinement in Al/Ti composites | 3.4 | 27 | Citations (PDF) |
| 210 | Evaluating the flow properties of a magnesium ZK60 alloy processed by high-pressure torsion: A comparison of two different miniature testing techniques | 6.3 | 35 | Citations (PDF) |
| 211 | Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures | 0.5 | 10 | Citations (PDF) |
| 212 | Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing | 6.3 | 189 | Citations (PDF) |
| 213 | Comparisons of self-annealing behaviour of HPT-processed high purity Cu and a Pb–Sn alloy | 6.1 | 9 | Citations (PDF) |
| 214 | Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis | 8.7 | 88 | Citations (PDF) |
| 215 | Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys | 8.7 | 83 | Citations (PDF) |
| 216 | Effect of equal-channel angular pressing on the mechanical behavior of a Bi-Sn eutectic alloy | 0.5 | 2 | Citations (PDF) |
| 217 | Effects on hardness and microstructure of AISI 1020 low-carbon steel processed by high-pressure torsion | 6.1 | 38 | Citations (PDF) |
| 218 | Thermal stability and mechanical properties of HPT-processed CP-Ti | 0.5 | 8 | Citations (PDF) |
| 219 | An examination of the superplastic characteristics of Al–Mg–Sc alloys after processing | 2.5 | 20 | Citations (PDF) |
| 220 | Effect of cold rolling on the structure and hydrogen properties of AZ91 and AM60D magnesium alloys processed by ECAP | 9.0 | 34 | Citations (PDF) |
| 221 | An evaluation of the hexagonal close-packed to face-centered cubic phase transformation in a Ti-6Al-4V alloy during high-pressure torsion | 6.3 | 42 | Citations (PDF) |
| 222 | Examining the microhardness evolution and thermal stability of an Al–Mg–Sc alloy processed by high-pressure torsion at a high temperature | 6.1 | 15 | Citations (PDF) |
| 223 | Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion | 6.1 | 59 | Citations (PDF) |
| 224 | Influence of Mo alloying on the thermal stability and hardness of ultrafine-grained Ni processed by high-pressure torsion | 6.1 | 7 | Citations (PDF) |
| 225 | Hardness evolution of AZ80 magnesium alloy processed by HPT at different temperatures | 6.1 | 20 | Citations (PDF) |
| 226 | The effect of high-pressure torsion on the microstructure and properties of magnesium | 0.5 | 7 | Citations (PDF) |
| 227 | Direct influence of recovery behaviour on mechanical properties in oxygen-free copper processed using different SPD techniques: HPT and ECAP | 6.1 | 54 | Citations (PDF) |
| 228 | Nano‐ and Micro‐Mechanical Properties of Ultrafine‐Grained Materials Processed by Severe Plastic Deformation Techniques | 2.9 | 47 | Citations (PDF) |
| 229 | Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation | 8.7 | 165 | Citations (PDF) |
| 230 | Achieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing | 6.1 | 42 | Citations (PDF) |
| 231 | Influence of Zn content on the microstructure and mechanical performance of ultrafine-grained Al–Zn alloys processed by high-pressure torsion | 2.5 | 31 | Citations (PDF) |
| 232 | Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining | 6.3 | 10 | Citations (PDF) |
| 233 | High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion | 6.3 | 40 | Citations (PDF) |
| 234 | Microstructural evolution and superplasticity in an Mg–Gd–Y–Zr alloy after processing by different SPD techniques | 6.3 | 61 | Citations (PDF) |
| 235 | Fabrication of hybrid metal systems through the application of high-pressure torsion | 0.5 | 5 | Citations (PDF) |
| 236 | Microstructure and Hardness Evolution in Magnesium Processed by HPT | 1.0 | 20 | Citations (PDF) |
| 237 | Examining the Thermal Stability of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion | 1.0 | 15 | Citations (PDF) |
| 238 | Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites | 1.0 | 21 | Citations (PDF) |
| 239 | The 7th International Conference on Nanomaterials by Severe Plastic Deformation: a report of the International NanoSPD Steering Committee | 0.5 | 1 | Citations (PDF) |
| 240 | Development of an ω-Phase in Grade 2 Titanium Processed by HPT at High Hydrostatic Pressure | 1.0 | 7 | Citations (PDF) |
| 241 | Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion | 6.0 | 68 | Citations (PDF) |
| 242 | Micro‐Mechanical Behavior of an Exceptionally Strong Metal Matrix Nanocomposite Processed by High‐Pressure Torsion | 2.9 | 35 | Citations (PDF) |
| 243 | Investigating Anvil Alignment and Anvil Roughness on Flow Pattern Development in High-Pressure Torsion | 0.1 | 0 | Citations (PDF) |
| 244 | Synchrotron X-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing | 8.7 | 21 | Citations (PDF) |
| 245 | The effect of grain size on the annealing-induced phase transformation in an Al0·3CoCrFeNi high entropy alloy | 6.9 | 86 | Citations (PDF) |
| 246 | Evolution of microstructure and hardness in an AZ80 magnesium alloy processed by high-pressure torsion | 6.1 | 42 | Citations (PDF) |
| 247 | Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion | 6.3 | 25 | Citations (PDF) |
| 248 | Evidence for a transition in deformation mechanism in nanocrystalline pure titanium processed by high-pressure torsion | 1.6 | 6 | Citations (PDF) |
| 249 | A comparison of repetitive corrugation and straightening and high-pressure torsion using an Al-Mg-Sc alloy | 6.1 | 32 | Citations (PDF) |
| 250 | Microstructure, Texture, and Superplasticity of a Fine-Grained Mg-Gd-Zr Alloy Processed by Equal-Channel Angular Pressing | 2.1 | 48 | Citations (PDF) |
| 251 | The Requirements for Superplasticity with an Emphasis on Magnesium Alloys | 2.9 | 34 | Citations (PDF) |
| 252 | Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion | 6.3 | 305 | Citations (PDF) |
| 253 | Effect of applied pressure on microstructure development and homogeneity in an aluminium alloy processed by high-pressure torsion | 6.0 | 27 | Citations (PDF) |
| 254 | An Unusual Extrusion Texture in Mg–Gd–Y–Zr Alloys | 2.9 | 76 | Citations (PDF) |
| 255 | Microstructural Evolution and Micro‐Compression in High‐Purity Copper Processed by High‐Pressure Torsion | 2.9 | 23 | Citations (PDF) |
| 256 | High‐Cycle Fatigue Behavior of an Ultrafine‐Grained Ti–6Al–4V Alloy Processed by ECAP and Extrusion | 2.9 | 48 | Citations (PDF) |
| 257 | Characteristics of the allotropic phase transformation in titanium processed by high-pressure torsion using different rotation speeds | 6.3 | 52 | Citations (PDF) |
| 258 | Mechanical properties and microstructural evolution of nanocrystalline titanium at elevated temperatures | 6.3 | 30 | Citations (PDF) |
| 259 | Microstructure and microhardness of an Al-6061 metal matrix composite processed by high-pressure torsion | 5.0 | 44 | Citations (PDF) |
| 260 | Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion | 6.3 | 94 | Citations (PDF) |
| 261 | The significance of self-annealing at room temperature in high purity copper processed by high-pressure torsion | 6.3 | 109 | Citations (PDF) |
| 262 | An investigation into the effect of substrate on the load-bearing capacity of thin hard coatings | 3.4 | 24 | Citations (PDF) |
| 263 | Principle of one-step synthesis for multilayered structures using tube high-pressure shearing | 6.3 | 21 | Citations (PDF) |
| 264 | Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later | 2.0 | 433 | Citations (PDF) |
| 265 | Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys | 8.7 | 221 | Citations (PDF) |
| 266 | Achieving superior grain refinement and mechanical properties in vanadium through high-pressure torsion and subsequent short-term annealing | 6.3 | 34 | Citations (PDF) |
| 267 | Developing superplasticity in an aluminum matrix composite processed by high-pressure torsion | 6.3 | 46 | Citations (PDF) |
| 268 | Superplasticity of a nano-grained Mg–Gd–Y–Zr alloy processed by high-pressure torsion | 6.3 | 93 | Citations (PDF) |
| 269 | Wear resistance and electroconductivity in a Cu–0.3Cr–0.5Zr alloy processed by ECAP | 3.4 | 41 | Citations (PDF) |
| 270 | Strengthening and weakening in the processing of ultrafine-grained metals | 0.2 | 6 | Citations (PDF) |
| 271 | Microstructure decomposition and unique mechanical properties in an ultrafine-grained Al-Zn alloy processed by high-pressure torsion | 0.2 | 3 | Citations (PDF) |
| 272 | Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion | 2.5 | 124 | Citations (PDF) |
| 273 | Grain boundary character distribution of CuNiSi and FeNi alloys processed by severe plastic deformation | 0.5 | 6 | Citations (PDF) |
| 274 | Developing ultrafine-grained materials with high strength and good ductility for micro-forming applications | 0.3 | 1 | Citations (PDF) |
| 275 | An evaluation of formability using micro-embossing on an ultrafine-grained magnesium AZ31 alloy processed by high-pressure torsion | 0.3 | 3 | Citations (PDF) |
| 276 | Micro-deformation behavior in micro-compression with high-purity aluminum processed by ECAP | 1.4 | 48 | Citations (PDF) |
| 277 | Microstructure and microhardness of OFHC copper processed by high-pressure torsion | 6.3 | 31 | Citations (PDF) |
| 278 | Microstructural stability and grain growth kinetics in an extruded fine-grained Mg–Gd–Y–Zr alloy | 3.4 | 61 | Citations (PDF) |
| 279 | Microstructure and texture evolution in a Cu–Ni–Si alloy processed by equal-channel angular pressing | 6.0 | 24 | Citations (PDF) |
| 280 | A critical examination of pure tantalum processed by high-pressure torsion | 6.3 | 53 | Citations (PDF) |
| 281 | Effects of equal-channel angular pressing and accumulative roll-bonding on hydrogen storage properties of a commercial ZK60 magnesium alloy | 9.0 | 52 | Citations (PDF) |
| 282 | Influence of phase volume fraction on the grain refining of a Ti-6Al-4V alloy by high-pressure torsion | 6.1 | 34 | Citations (PDF) |
| 283 | Micro‐Forming Using Ultrafine‐Grained Aluminum Processed by Equal‐Channel Angular Pressing | 2.9 | 22 | Citations (PDF) |
| 284 | Structural impact on the Hall–Petch relationship in an Al–5Mg alloy processed by high-pressure torsion | 6.3 | 93 | Citations (PDF) |
| 285 | Anneal hardening of a nanostructured Cu–Al alloy processed by high-pressure torsion and rolling | 6.3 | 30 | Citations (PDF) |
| 286 | Annealing behavior and shape memory effect in NiTi alloy processed by equal-channel angular pressing at room temperature | 6.3 | 35 | Citations (PDF) |
| 287 | Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins | 5.4 | 70 | Citations (PDF) |
| 288 | Evolution in hardness and texture of a ZK60A magnesium alloy processed by high-pressure torsion | 6.3 | 77 | Citations (PDF) |
| 289 | Wear resistance of an ultrafine-grained Cu-Zr alloy processed by equal-channel angular pressingWear, 2015, 326-327, 10-19 | 3.5 | 77 | Citations (PDF) |
| 290 | Evaluating the Room Temperature ECAP Processing of a NiTi Alloy via Simulation and Experiments | 2.9 | 9 | Citations (PDF) |
| 291 | Temperature and strain rate dependence of microstructural evolution and dynamic mechanical behavior in nanocrystalline Ti | 6.3 | 14 | Citations (PDF) |
| 292 | Effect of temperature on microstructural stabilization and mechanical properties in the dynamic testing of nanocrystalline pure Ti | 6.3 | 19 | Citations (PDF) |
| 293 | Grain size and microhardness evolution during annealing of a magnesium alloy processed by high-pressure torsion | 6.1 | 33 | Citations (PDF) |
| 294 | Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature | 6.3 | 70 | Citations (PDF) |
| 295 | Evolution in hardness and microstructure of ZK60A magnesium alloy processed by high-pressure torsion | 6.1 | 28 | Citations (PDF) |
| 296 | The contribution of grain boundary sliding in tensile deformation of an ultrafine-grained aluminum alloy having high strength and high ductility | 3.4 | 41 | Citations (PDF) |
| 297 | Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing | 2.5 | 170 | Citations (PDF) |
| 298 | The microstructure length scale of strain rate sensitivity in ultrafine-grained aluminum | 2.5 | 5 | Citations (PDF) |
| 299 | Superplasticity and superplastic-like flow in cubic zirconia with silica | 3.4 | 3 | Citations (PDF) |
| 300 | An evaluation of the saturation hardness in an ultrafine-grained aluminum 7075 alloy processed using different techniques | 3.4 | 43 | Citations (PDF) |
| 301 | Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy | 3.4 | 17 | Citations (PDF) |
| 302 | An examination of the elastic distortions of anvils in high-pressure torsion | 6.3 | 28 | Citations (PDF) |
| 303 | Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite | 2.1 | 26 | Citations (PDF) |
| 304 | Effect of grain size and specimen dimensions on micro-forming of high purity aluminum | 6.3 | 63 | Citations (PDF) |
| 305 | An X-ray absorption spectroscopy investigation of the local atomic structure in Cu–Ni–Si alloy after severe plastic deformation and ageing | 1.6 | 2 | Citations (PDF) |
| 306 | Effect of grain size on compressive behaviour of titanium at different strain rates | 6.3 | 29 | Citations (PDF) |
| 307 | Microhardness, microstructure and tensile behavior of an AZ31 magnesium alloy processed by high-pressure torsion | 3.4 | 68 | Citations (PDF) |
| 308 | Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites | 3.0 | 36 | Citations (PDF) |
| 309 | Microstructural homogeneity and superplastic behavior in an aluminum–copper eutectic alloy processed by high-pressure torsion | 3.4 | 5 | Citations (PDF) |
| 310 | Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion | 6.3 | 56 | Citations (PDF) |
| 311 | Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion | 5.4 | 58 | Citations (PDF) |
| 312 | Enhancement in mechanical properties of a β-titanium alloy by high-pressure torsion | 6.1 | 44 | Citations (PDF) |
| 313 | Formation of epsilon martensite by high-pressure torsion in a TRIP steel | 6.3 | 31 | Citations (PDF) |
| 314 | Mechanical Properties and Microstructural Behavior of a Metal Matrix Composite Processed by Severe Plastic Deformation Techniques | 0.9 | 1 | Citations (PDF) |
| 315 | Evidence for an early softening behavior in pure copper processed by high-pressure torsion | 3.4 | 18 | Citations (PDF) |
| 316 | The influence of grain size and strain rate on the mechanical behavior of pure magnesium | 3.4 | 79 | Citations (PDF) |
| 317 | Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures | 3.4 | 103 | Citations (PDF) |
| 318 | Review: achieving superplastic properties in ultrafine-grained materials at high temperatures | 3.4 | 113 | Citations (PDF) |
| 319 | Developing Superplasticity in Ultrafine-Grained Metals | 0.4 | 16 | Citations (PDF) |
| 320 | Achieving superplasticity through severe plastic deformation | 0.6 | 1 | Citations (PDF) |
| 321 | Grain refining of a Ti-6Al-4V alloy by high-pressure torsion and low temperature superplasticity | 0.6 | 15 | Citations (PDF) |
| 322 | Microstructural properties, thermal stability and superplasticity of a ZK60 Mg alloy processed by high-pressure torsion | 0.6 | 12 | Citations (PDF) |
| 323 | Examining the mechanical properties and superplastic behaviour in an Al-Mg-Sc alloy after processing by HPT | 0.6 | 10 | Citations (PDF) |
| 324 | Achieving superplasticity in a Bi-Sn alloy processed by high-pressure torsion | 0.6 | 1 | Citations (PDF) |
| 325 | Microstructural saturation, hardness stability and superplasticity in ultrafine-grained metals processed by a combination of severe plastic deformation techniques | 0.6 | 6 | Citations (PDF) |
| 326 | An evaluation of high temperature tensile properties for a magnesium AZ31 alloy processed by high-pressure torsion | 0.6 | 3 | Citations (PDF) |
| 327 | The characteristics of two-phase Al-Cu and Zn-Al alloys processed by high-pressure torsion | 0.5 | 3 | Citations (PDF) |
| 328 | The significance of self-annealing in two-phase alloys processed by high-pressure torsion | 0.5 | 8 | Citations (PDF) |
| 329 | High-Pressure Torsion of Ti: Synchrotron characterization of phase volume fraction and domain sizes | 0.5 | 6 | Citations (PDF) |
| 330 | Evolution of hardness, microstructure, and strain rate sensitivity in a Zn-22% Al eutectoid alloy processed by high-pressure torsion | 0.5 | 2 | Citations (PDF) |
| 331 | Microstructural evolution and microhardness in a low carbon steel processed by high-pressure torsion | 6.1 | 17 | Citations (PDF) |
| 332 | An overview of flow patterns development on disc lower surfaces when processing by high-pressure torsion | 6.1 | 7 | Citations (PDF) |
| 333 | Strain weakening and superplasticity in a Bi-Sn eutectic alloy processed by high-pressure torsion | 0.5 | 7 | Citations (PDF) |
| 334 | Processing magnesium alloys by severe plastic deformation | 0.5 | 19 | Citations (PDF) |
| 335 | An examination of the saturation microstructures achieved in ultrafine-grained metals processed by high-pressure torsion | 6.1 | 19 | Citations (PDF) |
| 336 | Shape memory effect of NiTi alloy processed by equal-channel angular pressing followed by post deformation annealing | 0.5 | 11 | Citations (PDF) |
| 337 | X-ray microbeam measurements of long-range internal stresses in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing | 5.4 | 10 | Citations (PDF) |
| 338 | Martensitic Phase Transformation and Deformation Behavior of Fe–Mn–C–Al Twinning‐Induced Plasticity Steel during High‐Pressure Torsion | 2.9 | 15 | Citations (PDF) |
| 339 | Strain-induced martensite to austenite reverse transformation in an ultrafine-grained Fe–Ni–Mn martensitic steel | 1.6 | 18 | Citations (PDF) |
| 340 | Grain Boundary Phenomena in an Ultrafine‐Grained Al–Zn Alloy with Improved Mechanical Behavior for Micro‐Devices | 2.9 | 98 | Citations (PDF) |
| 341 | Fatigue Life and Failure Characteristics of an Ultrafine‐Grained Ti–6Al–4V Alloy Processed by ECAP and Extrusion | 2.9 | 33 | Citations (PDF) |
| 342 | Using finite element modelling to examine the flow process and temperature evolution in HPT under different constraining conditions | 0.5 | 17 | Citations (PDF) |
| 343 | The effect of microstructure heterogeneity on the microscale deformation of ultrafine-grained aluminum | 2.5 | 13 | Citations (PDF) |
| 344 | A critical examination of the paradox of strength and ductility in ultrafine-grained metals | 2.5 | 34 | Citations (PDF) |
| 345 | Reassessment of temperature increase and equivalent strain calculation during high-pressure torsion | 0.5 | 8 | Citations (PDF) |
| 346 | Characterization of stress–strain relationships in Al over a wide range of testing temperatures | 11.1 | 28 | Citations (PDF) |
| 347 | Correlation between hydrogen storage properties and textures induced in magnesium through ECAP and cold rolling | 9.0 | 72 | Citations (PDF) |
| 348 | Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature | 6.3 | 59 | Citations (PDF) |
| 349 | Twinning via the motion of incoherent twin boundaries nucleated at grain boundaries in a nanocrystalline Cu alloy | 5.4 | 56 | Citations (PDF) |
| 350 | A critical evaluation of the processing of an aluminum 7075 alloy using a combination of ECAP and HPT | 6.3 | 66 | Citations (PDF) |
| 351 | Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion | 3.4 | 42 | Citations (PDF) |
| 352 | An in situ synchrotron X-ray diffraction study of precipitation kinetics in a severely deformed Cu–Ni–Si alloy | 6.3 | 48 | Citations (PDF) |
| 353 | The corrosion behaviour of commercial purity titanium processed by high-pressure torsion | 3.4 | 102 | Citations (PDF) |
| 354 | Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion | 3.4 | 11 | Citations (PDF) |
| 355 | Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP | 3.4 | 16 | Citations (PDF) |
| 356 | Microstructural evolution and mechanical properties in a Zn–Al eutectoid alloy processed by high-pressure torsion | 8.7 | 59 | Citations (PDF) |
| 357 | Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn–22% Al during high-pressure torsion | 5.4 | 57 | Citations (PDF) |
| 358 | Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression | 5.4 | 19 | Citations (PDF) |
| 359 | An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion | 3.4 | 20 | Citations (PDF) |
| 360 | Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion | 8.7 | 107 | Citations (PDF) |
| 361 | Properties of a ZK60 magnesium alloy processed by high-pressure torsion | 6.0 | 106 | Citations (PDF) |
| 362 | Electron backscatter diffraction (EBSD) microstructure evolution in HPT copper annealed at a low temperature | 6.1 | 35 | Citations (PDF) |
| 363 | Microstructural evolution of cryomilled Ti/Al mixture during high-pressure torsion | 2.5 | 9 | Citations (PDF) |
| 364 | Microhardness evolution and mechanical characteristics of commercial purity titanium processed by high-pressure torsion | 6.3 | 86 | Citations (PDF) |
| 365 | Evolution of hardness in ultrafine-grained metals processed by high-pressure torsion | 6.1 | 33 | Citations (PDF) |
| 366 | Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing | 6.3 | 62 | Citations (PDF) |
| 367 | Review: achieving superplasticity in metals processed by high-pressure torsion | 3.4 | 71 | Citations (PDF) |
| 368 | Long-term self-annealing of copper and aluminium processed by high-pressure torsion | 3.4 | 13 | Citations (PDF) |
| 369 | Microstructural evolution in ultrafine-grained titanium processed by high-pressure torsion under different pressures | 3.4 | 48 | Citations (PDF) |
| 370 | Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion | 3.4 | 19 | Citations (PDF) |
| 371 | Effect of short-term annealing on the microstructures and flow properties of an Al–1% Mg alloy processed by high-pressure torsion | 6.3 | 83 | Citations (PDF) |
| 372 | Evaluating a New Core‐Sheath Procedure for Processing Hard Metals by Equal‐Channel Angular Pressing | 2.9 | 12 | Citations (PDF) |
| 373 | Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing | 6.1 | 52 | Citations (PDF) |
| 374 | High-cycle fatigue behavior of Zn–22% Al alloy processed by high-pressure torsion | 6.3 | 10 | Citations (PDF) |
| 375 | Modeling the temperature rise in high-pressure torsion | 6.3 | 80 | Citations (PDF) |
| 376 | Interpretation of hardness evolution in metals processed by high-pressure torsion | 3.4 | 62 | Citations (PDF) |
| 377 | Microstructures and mechanical properties of pure tantalum processed by high-pressure torsion | 0.5 | 10 | Citations (PDF) |
| 378 | Producing ultrafine-grained materials through severe plastic deformation | 0.6 | 5 | Citations (PDF) |
| 379 | Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities | 0.5 | 4 | Citations (PDF) |
| 380 | Mechanical property evaluation of an Al-2024 alloy subjected to HPT processing | 0.5 | 19 | Citations (PDF) |
| 381 | Microstructural evolution and microhardness variations in a Cu–36Zn–2Pb alloy processed by high-pressure torsion | 3.4 | 4 | Citations (PDF) |
| 382 | The flow characteristics of superplasticity | 0.6 | 3 | Citations (PDF) |
| 383 | Inhomogeneous softening during annealing of ultrafine-grained silver processed by HPT | 3.4 | 7 | Citations (PDF) |
| 384 | Recent developments in modelling of microhardness saturation during SPD processing of metals and alloys | 3.4 | 22 | Citations (PDF) |
| 385 | An analytical approach and experimental confirmation of dislocation–twin boundary interactions in titanium | 3.4 | 27 | Citations (PDF) |
| 386 | Evolution of a martensitic structure in a Cu–Al alloy during processing by high-pressure torsion | 3.4 | 11 | Citations (PDF) |
| 387 | Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT | 3.4 | 19 | Citations (PDF) |
| 388 | Structural and hardness inhomogeneities in Mg–Al–Zn alloys processed by high-pressure torsion | 3.4 | 39 | Citations (PDF) |
| 389 | Tribology testing of ultrafine-grained Ti processed by high-pressure torsion with subsequent coating | 3.4 | 32 | Citations (PDF) |
| 390 | Dry sliding wear of an AZ31 magnesium alloy processed by equal-channel angular pressing | 3.4 | 43 | Citations (PDF) |
| 391 | Hardness homogeneity and micro-tensile behavior in a magnesium AZ31 alloy processed by equal-channel angular pressing | 6.3 | 52 | Citations (PDF) |
| 392 | A characterization of microstructure and microhardness on longitudinal planes of an Al–Mg–Si alloy processed by ECAP | 5.0 | 29 | Citations (PDF) |
| 393 | An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing | 9.0 | 103 | Citations (PDF) |
| 394 | Achieving superplasticity in ultrafine-grained metals | 3.7 | 43 | Citations (PDF) |
| 395 | The significance of grain boundary sliding in the superplastic Zn–22 % Al alloy processed by ECAP | 3.4 | 29 | Citations (PDF) |
| 396 | Laser compression of nanocrystalline tantalum | 8.7 | 49 | Citations (PDF) |
| 397 | Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement | 8.7 | 736 | Citations (PDF) |
| 398 | Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP | 8.7 | 16 | Citations (PDF) |
| 399 | Microstructures and textures of a Cu–Ni–Si alloy processed by high-pressure torsion | 6.0 | 77 | Citations (PDF) |
| 400 | De-twinning via secondary twinning in face-centered cubic alloys | 6.3 | 45 | Citations (PDF) |
| 401 | Using an Al–Cu binary alloy to compare processing by multi-axial compression and high-pressure torsion | 6.3 | 31 | Citations (PDF) |
| 402 | An examination of microstructural evolution in a Cu–Ni–Si alloy processed by HPT and ECAP | 6.3 | 51 | Citations (PDF) |
| 403 | The processing of NiTi shape memory alloys by equal-channel angular pressing at room temperature | 6.3 | 50 | Citations (PDF) |
| 404 | Advances in ultrafine-grained materials | 14.0 | 168 | Citations (PDF) |
| 405 | On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion | 6.3 | 88 | Citations (PDF) |
| 406 | Creep mechanisms in an Mg–4Zn alloy in the as-cast and aged conditions | 6.3 | 26 | Citations (PDF) |
| 407 | Indentation and scratch testing of DLC-Zr coatings on ultrafine-grained titanium processed by high-pressure torsion | 3.5 | 53 | Citations (PDF) |
| 408 | Microstructural evolution in a Cu–Zr alloy processed by a combination of ECAP and HPT | 6.3 | 41 | Citations (PDF) |
| 409 | Wear resistance and electroconductivity in copper processed by severe plastic deformation | 3.5 | 120 | Citations (PDF) |
| 410 | Adiabatic heating and the saturation of grain refinement during SPD of metals and alloys: experimental assessment and computer modeling | 3.4 | 33 | Citations (PDF) |
| 411 | Microstructure and microtexture in pure copper processed by high-pressure torsion | 3.4 | 40 | Citations (PDF) |
| 412 | Processing of an ultrafine-grained titanium by high-pressure torsion: An evaluation of the wear properties with and without a TiN coating | 3.3 | 62 | Citations (PDF) |
| 413 | Influence of phase volume fractions on the processing of a Ti–6Al–4V alloy by high-pressure torsion | 6.3 | 48 | Citations (PDF) |
| 414 | Development of hardness homogeneity and superplastic behavior in an aluminum–copper eutectic alloy processed by high-pressure torsion | 6.3 | 45 | Citations (PDF) |
| 415 | Influence of annealing on ductility of ultrafine-grained titanium processed by equal-channel angular pressing–Conform and drawing | 1.8 | 35 | Citations (PDF) |
| 416 | Influence of Anvil Alignment on Shearing Patterns in High‐Pressure Torsion | 2.9 | 36 | Citations (PDF) |
| 417 | The many facets of deformation mechanism mapping and the application to nanostructured materials | 2.5 | 21 | Citations (PDF) |
| 418 | Heterogeneous flow during high-pressure torsion | 1.0 | 4 | Citations (PDF) |
| 419 | Evaluating the flow processes in ultrafine-grained materials at elevated temperatures | 1.0 | 4 | Citations (PDF) |
| 420 | Microhardness and EBSD microstructure mapping in partially-pressed al and cu through 90º ECAP die | 1.0 | 5 | Citations (PDF) |
| 421 | Microstructure and texture evolution in a magnesium alloy during processing by high-pressure torsion | 1.0 | 38 | Citations (PDF) |
| 422 | Effect of annealing on wear resistance and electroconductivity of copper processed by high-pressure torsion | 3.4 | 20 | Citations (PDF) |
| 423 | Observations of unique plastic behavior in micro-pillars of an ultrafine-grained alloy | 1.8 | 33 | Citations (PDF) |
| 424 | Applied stress controls the production of nano-twins in coarse-grained metals | 3.0 | 26 | Citations (PDF) |
| 425 | Possible self-organized criticality in the Portevin-Le Chatelier effect during decomposition of solid solution alloys | 1.8 | 9 | Citations (PDF) |
| 426 | Microstructural evolution and electro-resistivity in HPT nickel | 6.3 | 42 | Citations (PDF) |
| 427 | The development of hardness homogeneity in a Cu–Zr alloy processed by equal-channel angular pressing | 6.3 | 49 | Citations (PDF) |
| 428 | Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation | 6.0 | 19 | Citations (PDF) |
| 429 | Fabricating Ultrafine-Grained Materials through the Application of Severe Plastic Deformation: a Review of Developments in Brazil | 6.1 | 48 | Citations (PDF) |
| 430 | Preface to the special issue on ultrafine-grained materials | 3.4 | 2 | Citations (PDF) |
| 431 | Twenty-five years of severe plastic deformation: recent developments in evaluating the degree of homogeneity through the thickness of disks processed by high-pressure torsion | 3.4 | 50 | Citations (PDF) |
| 432 | Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials | 3.4 | 9 | Citations (PDF) |
| 433 | Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion | 3.4 | 76 | Citations (PDF) |
| 434 | Effect of temperature on the processing of a magnesium alloy by high-pressure torsion | 3.4 | 35 | Citations (PDF) |
| 435 | Analysis of plastic flow during high-pressure torsion | 3.4 | 54 | Citations (PDF) |
| 436 | Effect of aging on microstructural development in an Al–Mg–Si alloy processed by high-pressure torsion | 3.4 | 52 | Citations (PDF) |
| 437 | Microstructure and tensile strength of grade 2 titanium processed by equal-channel angular pressing and by rolling | 3.4 | 69 | Citations (PDF) |
| 438 | Microstructure and microtexture evolution in pure metals after ultra-high straining | 3.4 | 11 | Citations (PDF) |
| 439 | Processing a twinning-induced plasticity steel by high-pressure torsion | 5.4 | 51 | Citations (PDF) |
| 440 | Principles of severe plastic deformation using tube high-pressure shearing | 5.4 | 76 | Citations (PDF) |
| 441 | Optimizing strength and ductility of Cu–Zn alloys through severe plastic deformation | 5.4 | 92 | Citations (PDF) |
| 442 | Influence of rolling direction on flow and cavitation in a superplastic magnesium alloy processed by equal-channel angular pressing | 6.3 | 19 | Citations (PDF) |
| 443 | Factors influencing creep flow and ductility in ultrafine-grained metals | 6.3 | 21 | Citations (PDF) |
| 444 | Bulk Nanostructured Metals for Innovative Applications | 2.0 | 114 | Citations (PDF) |
| 445 | Influence of Pressing Temperature on Microstructure Evolution and Mechanical Behavior of Ultrafine‐Grained Cu Processed by Equal‐Channel Angular Pressing | 2.9 | 34 | Citations (PDF) |
| 446 | Evolution of Strength and Homogeneity in a Magnesium AZ31 Alloy Processed by High‐Pressure Torsion at Different Temperatures | 2.9 | 83 | Citations (PDF) |
| 447 | Achieving homogeneity in a Cu–Zr alloy processed by high-pressure torsion | 3.4 | 60 | Citations (PDF) |
| 448 | Tribological properties of ultrafine-grained materials processed by severe plastic deformation | 3.4 | 120 | Citations (PDF) |
| 449 | Microstructural heterogeneity in hexagonal close-packed pure Ti processed by high-pressure torsion | 3.4 | 18 | Citations (PDF) |
| 450 | Introducing a strain-hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation | 8.7 | 88 | Citations (PDF) |
| 451 | Microstructures, strengthening mechanisms and fracture behavior of Cu–Ag alloys processed by high-pressure torsion | 8.7 | 85 | Citations (PDF) |
| 452 | The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials | 8.7 | 190 | Citations (PDF) |
| 453 | Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion | 8.7 | 297 | Citations (PDF) |
| 454 | Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing | 5.4 | 175 | Citations (PDF) |
| 455 | Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion | 6.3 | 171 | Citations (PDF) |
| 456 | A theoretical and experimental evaluation of repetitive corrugation and straightening: Application to Al–Cu and Al–Cu–Sc alloys | 6.3 | 35 | Citations (PDF) |
| 457 | Strain rate sensitivity studies in an ultrafine-grained Al–30wt.% Zn alloy using micro- and nanoindentation | 6.3 | 97 | Citations (PDF) |
| 458 | Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsionWear, 2012, 280-281, 28-35 | 3.5 | 103 | Citations (PDF) |
| 459 | A comparison of microstructures and mechanical properties in a Cu–Zr alloy processed using different SPD techniques | 3.4 | 126 | Citations (PDF) |
| 460 | Effect of heat treatment on microstructure and microhardness evolution in a Ti–6Al–4V alloy processed by high-pressure torsion | 3.4 | 56 | Citations (PDF) |
| 461 | Microstructure and microtexture evolution with aging treatment in an Al–Mg–Si alloy severely deformed by HPT | 3.4 | 9 | Citations (PDF) |
| 462 | Microstructural evolution in two-phase alloys processed by high-pressure torsion | 3.4 | 47 | Citations (PDF) |
| 463 | Achieving homogeneity in a two-phase Cu–Ag composite during high-pressure torsion | 3.4 | 16 | Citations (PDF) |
| 464 | Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion | 3.4 | 10 | Citations (PDF) |
| 465 | Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion | 3.4 | 27 | Citations (PDF) |
| 466 | High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing | 3.4 | 16 | Citations (PDF) |
| 467 | An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion | 3.4 | 31 | Citations (PDF) |
| 468 | Three-dimensional analysis of plastic flow during high-pressure torsion | 3.4 | 29 | Citations (PDF) |
| 469 | An Evaluation of Homogeneity and Heterogeneity in Metals Processed by High-Pressure Torsion | 0.4 | 20 | Citations (PDF) |
| 470 | Macroscopic and Microscopic Descriptions of the Plastic Deformation of Fcc Metals over a Wide Range of Strain and Temperature | 0.4 | 1 | Citations (PDF) |
| 471 | An investigation of ductility and microstructural evolution in an Al−3% Mg alloy with submicron grain size | 2.5 | 92 | Citations (PDF) |
| 472 | A quantitative measure of internal cavitation in superplastic alloys using photoacoustic analysis | 2.5 | 2 | Citations (PDF) |
| 473 | Influence of whisker volume fraction on the creep behavior of alumina composites reinforced with silicon carbide | 2.5 | 0 | Citations (PDF) |
| 474 | An investigation of grain boundaries in submicrometer-grained Al-Mg solid solution alloys using high-resolution electron microscopy | 2.5 | 195 | Citations (PDF) |
| 475 | A quantitative analysis of cavitation in Al–Cu–Mg metal matrix composites exhibiting high strain rate superplasticity | 2.5 | 2 | Citations (PDF) |
| 476 | Fabrication of submicrometer-grained Zn–22% Al by torsion straining | 2.5 | 44 | Citations (PDF) |
| 477 | Observations of grain boundary structure in submicrometer-grained Cu and Ni using high-resolution electron microscopy | 2.5 | 77 | Citations (PDF) |
| 478 | Fabrication and thermal stability of a nanocrystalline Ni–Al–Cr alloy: Comparison with pure Cu and Ni | 2.5 | 30 | Citations (PDF) |
| 479 | Influence of stacking fault energy on microstructural development in equal-channel angular pressing | 2.5 | 112 | Citations (PDF) |
| 480 | A Discussion of Flow Mechanisms in Superplastic Yttria-Stabilized Tetragonal Zirconia | 0.1 | 0 | Citations (PDF) |
| 481 | Creep Behavior of a Superplastic Y-TZP/Al2O3 Composite: An Examination of the Possibility for Diffusion Creep | 0.1 | 0 | Citations (PDF) |
| 482 | Grain Refinement of Aluminum using Equal-Channel Angular Pressing | 0.1 | 2 | Citations (PDF) |
| 483 | An Examination of the Deformation Process in Equal-Channel Angular Pressing | 0.1 | 0 | Citations (PDF) |
| 484 | Superplastic Properties of an Aluminum-Based Alloy After Equal-Channel Angular Pressing | 0.1 | 0 | Citations (PDF) |
| 485 | Influence of Equal-Channel Angular Pressing on the Superplastic Properties of Commercial Aluminum Alloys | 0.1 | 11 | Citations (PDF) |
| 486 | Processing by Equal-Channel Angular Pressing: Potential for Achieving Superplasticity | 0.1 | 1 | Citations (PDF) |
| 487 | Processing of nanostructured metals and alloys via plastic deformation | 4.1 | 86 | Citations (PDF) |
| 488 | Significance of stacking fault energy on microstructural evolution in Cu and Cu–Al alloys processed by high-pressure torsion | 1.6 | 92 | Citations (PDF) |
| 489 | Effect of grain size on the competition between twinning and detwinning in nanocrystalline metals | 3.4 | 68 | Citations (PDF) |
| 490 | Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion | 6.3 | 295 | Citations (PDF) |
| 491 | The effect of impurity level on ultrafine-grained microstructures and their stability in low stacking fault energy silver | 6.3 | 27 | Citations (PDF) |
| 492 | The development of hardness homogeneity in pure aluminum and aluminum alloy disks processed by high-pressure torsion | 6.3 | 86 | Citations (PDF) |
| 493 | Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion | 5.4 | 57 | Citations (PDF) |
| 494 | Grain growth and dislocation density evolution in a nanocrystalline Ni–Fe alloy induced by high-pressure torsion | 5.4 | 106 | Citations (PDF) |
| 495 | The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu–Al alloys processed by high-pressure torsion | 5.4 | 143 | Citations (PDF) |
| 496 | Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing | 5.4 | 9 | Citations (PDF) |
| 497 | Strain hardening behavior of a two-phase Cu–Ag alloy processed by high-pressure torsion | 5.4 | 24 | Citations (PDF) |
| 498 | A convergent-beam electron diffraction study of strain homogeneity in severely strained aluminum processed by equal-channel angular pressing | 8.7 | 14 | Citations (PDF) |
| 499 | Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion | 6.3 | 28 | Citations (PDF) |
| 500 | Influence of strain rate on the characteristics of a magnesium alloy processed by high-pressure torsion | 6.3 | 66 | Citations (PDF) |
| 501 | Microstructural evolution in an aluminum solid solution alloy processed by ECAP | 6.3 | 65 | Citations (PDF) |
| 502 | Developing superplasticity and a deformation mechanism map for the Zn–Al eutectoid alloy processed by high-pressure torsion | 6.3 | 79 | Citations (PDF) |
| 503 | Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature | 6.3 | 69 | Citations (PDF) |
| 504 | Microstructural evolution and mechanical properties of a Cu–Zr alloy processed by high-pressure torsion | 6.3 | 61 | Citations (PDF) |
| 505 | Segregation of solute elements at grain boundaries in an ultrafine grained Al–Zn–Mg–Cu alloy | 2.1 | 128 | Citations (PDF) |
| 506 | Deformation Heterogeneity on the Cross-Sectional Planes of a Magnesium Alloy Processed by High-Pressure Torsion | 2.1 | 45 | Citations (PDF) |
| 507 | Intrinsically Ductile Failure in a Nanocrystalline Beta Titanium Alloy | 2.9 | 3 | Citations (PDF) |
| 508 | An investigation of hardness homogeneity throughout disks processed by high-pressure torsion | 8.7 | 187 | Citations (PDF) |
| 509 | Plastic behavior of fcc metals over a wide range of strain: Macroscopic and microscopic descriptions and their relationship | 8.7 | 43 | Citations (PDF) |
| 510 | Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strains | 8.7 | 122 | Citations (PDF) |
| 511 | Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution | 8.7 | 106 | Citations (PDF) |
| 512 | Comparison of microstructures and mechanical properties of a Cu–Ag alloy processed using different severe plastic deformation modes | 6.3 | 54 | Citations (PDF) |
| 513 | Hardness homogeneity on longitudinal and transverse sections of an aluminum alloy processed by ECAP | 6.3 | 72 | Citations (PDF) |
| 514 | Development of structural heterogeneities in a magnesium alloy processed by high-pressure torsion | 6.3 | 84 | Citations (PDF) |
| 515 | Elemental redistribution in a nanocrystalline Ni–Fe alloy induced by high-pressure torsion | 6.3 | 8 | Citations (PDF) |
| 516 | Strain hardening and softening in a nanocrystalline Ni–Fe alloy induced by severe plastic deformation | 6.3 | 50 | Citations (PDF) |
| 517 | An experimental evaluation of a special ECAP die containing two equal arcs of curvature | 6.3 | 20 | Citations (PDF) |
| 518 | Strain softening in nanocrystalline Ni–Fe alloy induced by large HPT revolutions | 6.3 | 14 | Citations (PDF) |
| 519 | Flow mechanisms in ultrafine-grained metals with an emphasis on superplasticity | 6.3 | 52 | Citations (PDF) |
| 520 | Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy | 8.7 | 140 | Citations (PDF) |
| 521 | Influence of grain size on the density of deformation twins in Cu–30%Zn alloy | 6.3 | 46 | Citations (PDF) |
| 522 | The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion | 6.3 | 177 | Citations (PDF) |
| 523 | Significance of strain reversals in a two-phase alloy processed by high-pressure torsion | 6.3 | 75 | Citations (PDF) |
| 524 | An evaluation of creep behavior in ultrafine-grained aluminum alloys processed by ECAP | 3.4 | 26 | Citations (PDF) |
| 525 | A visualization of shear strain in processing by high-pressure torsion | 3.4 | 64 | Citations (PDF) |
| 526 | Avoiding cracks and inhomogeneities in billets processed by ECAP | 3.4 | 66 | Citations (PDF) |
| 527 | Influence of high-pressure torsion on microstructural evolution in an Al–Zn–Mg–Cu alloy | 3.4 | 48 | Citations (PDF) |
| 528 | Effect of strain reversals on the processing of high-purity aluminum by high-pressure torsion | 3.4 | 61 | Citations (PDF) |
| 529 | Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion | 3.4 | 69 | Citations (PDF) |
| 530 | Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy | 3.4 | 144 | Citations (PDF) |
| 531 | Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP | 3.4 | 197 | Citations (PDF) |
| 532 | Direct observations of microstructural evolution in a two-phase Cu–Ag alloy processed by high-pressure torsion | 5.4 | 59 | Citations (PDF) |
| 533 | Significance of twinning in the anisotropic behavior of a magnesium alloy processed by equal-channel angular pressing | 5.4 | 55 | Citations (PDF) |
| 534 | Evolution of microstructural homogeneity in copper processed by high-pressure torsion | 5.4 | 145 | Citations (PDF) |
| 535 | The Art and Science of Tailoring Materials by Nanostructuring for Advanced Properties Using SPD Techniques | 2.9 | 78 | Citations (PDF) |
| 536 | Principles of self-annealing in silver processed by equal-channel angular pressing: The significance of a very low stacking fault energy | 6.3 | 87 | Citations (PDF) |
| 537 | The characteristics of aluminum–scandium alloys processed by ECAP | 6.3 | 14 | Citations (PDF) |
| 538 | Microstructural evolution of Fe-rich particles in an Al–Zn–Mg–Cu alloy during equal-channel angular pressing | 6.3 | 43 | Citations (PDF) |
| 539 | The processing of pure titanium through multiple passes of ECAP at room temperature | 6.3 | 126 | Citations (PDF) |
| 540 | Evolution of texture in a magnesium alloy processed by ECAP through dies with different angles | 6.3 | 44 | Citations (PDF) |
| 541 | Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion | 6.3 | 126 | Citations (PDF) |
| 542 | The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP | 6.3 | 86 | Citations (PDF) |
| 543 | Microstructural evolution in a two-phase alloy processed by high-pressure torsion | 8.7 | 133 | Citations (PDF) |
| 544 | Plastic behavior of face-centered-cubic metals over a wide range of strain | 8.7 | 31 | Citations (PDF) |
| 545 | Using X-ray microtomography to evaluate cavity formation in a superplastic magnesium alloy processed by equal-channel angular pressing | 8.7 | 31 | Citations (PDF) |
| 546 | Monitoring of Self-Annealing in Ultrafine-Grained Silver Using Nanoindentation | 0.2 | 6 | Citations (PDF) |
| 547 | Wear behavior of an aluminum alloy processed by equal-channel angular pressing | 3.4 | 64 | Citations (PDF) |
| 548 | Achieving superplastic properties in a Pb–Sn eutectic alloy processed by equal-channel angular pressing | 3.4 | 33 | Citations (PDF) |
| 549 | Achieving Exceptional Grain Refinement through Severe Plastic Deformation: New Approaches for Improving the Processing Technology | 2.1 | 91 | Citations (PDF) |
| 550 | New Developments in the Processing of Bulk Nanoscale Metals Using High-Pressure Torsion | 0.2 | 0 | Citations (PDF) |
| 551 | Proceedings of the SPD Workshop, Melbourne, June 2009 | 0.4 | 0 | Citations (PDF) |
| 552 | An atom probe characterisation of grain boundaries in an aluminium alloy processed by equal-channel angular pressing | 0.4 | 28 | Citations (PDF) |
| 553 | Processing by severe plastic deformation:an ancient skill adapted for the modern world | 0.4 | 9 | Citations (PDF) |
| 554 | The characteristics of superplastic flow in a magnesium alloy processed by ECAP | 0.4 | 10 | Citations (PDF) |
| 555 | The nature of grain refinement in equal-channel angular pressing: a comparison of representative fcc and hcp metals | 0.4 | 26 | Citations (PDF) |
| 556 | Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials | 5.4 | 149 | Citations (PDF) |
| 557 | The significance of slippage in processing by high-pressure torsion | 5.4 | 130 | Citations (PDF) |
| 558 | Strategies for achieving high strain rate superplasticity in magnesium alloys processed by equal-channel angular pressing | 5.4 | 76 | Citations (PDF) |
| 559 | Constructing a deformation mechanism map for a superplastic Pb–Sn alloy processed by equal-channel angular pressing | 5.4 | 40 | Citations (PDF) |
| 560 | Factors influencing superplastic behavior in a magnesium ZK60 alloy processed by equal-channel angular pressing | 6.3 | 37 | Citations (PDF) |
| 561 | Three-dimensional representations of hardness distributions after processing by high-pressure torsion | 6.3 | 57 | Citations (PDF) |
| 562 | Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP | 6.3 | 181 | Citations (PDF) |
| 563 | Dynamic testing at high strain rates of an ultrafine-grained magnesium alloy processed by ECAP | 6.3 | 105 | Citations (PDF) |
| 564 | Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature | 6.3 | 76 | Citations (PDF) |
| 565 | The evolution of damage in perfect-plastic and strain hardening materials processed by equal-channel angular pressing | 6.3 | 41 | Citations (PDF) |
| 566 | Twinning and dislocation activity in silver processed by severe plastic deformation | 3.4 | 28 | Citations (PDF) |
| 567 | Influence of strain rate on strength and ductility in an aluminum alloy processed by equal-channel angular pressing | 3.4 | 13 | Citations (PDF) |
| 568 | Principles of grain refinement in magnesium alloys processed by equal-channel angular pressing | 3.4 | 143 | Citations (PDF) |
| 569 | Seventy-five years of superplasticity: historic developments and new opportunities | 3.4 | 438 | Citations (PDF) |
| 570 | Principles of deformation in single crystals of two different orientations processed by equal-channel angular pressing | 6.3 | 11 | Citations (PDF) |
| 571 | Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion | 6.3 | 45 | Citations (PDF) |
| 572 | Effect of stacking fault energy on strength and ductility of nanostructured alloys: An evaluation with minimum solution hardening | 6.3 | 89 | Citations (PDF) |
| 573 | Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure | 6.3 | 60 | Citations (PDF) |
| 574 | Research on bulk nanostructured materials in Ufa: Twenty years of scientific achievements | 6.3 | 19 | Citations (PDF) |
| 575 | Flow behavior of a superplastic Zn–22% Al alloy processed by equal-channel angular pressing | 6.3 | 22 | Citations (PDF) |
| 576 | New observations on high-temperature creep at very low stresses | 6.3 | 14 | Citations (PDF) |
| 577 | Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves | 6.3 | 227 | Citations (PDF) |
| 578 | Microstructural evolution in high purity aluminum processed by ECAP | 6.3 | 223 | Citations (PDF) |
| 579 | Using ring samples to evaluate the processing characteristics in high-pressure torsion | 8.7 | 71 | Citations (PDF) |
| 580 | Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy | 8.7 | 305 | Citations (PDF) |
| 581 | Using differential scanning calorimetry as an analytical tool for ultrafine grained metals processed by severe plastic deformation | 1.8 | 51 | Citations (PDF) |
| 582 | Correlation between microstructure and mechanical properties of severely deformed metals | 6.0 | 105 | Citations (PDF) |
| 583 | Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion | 0.4 | 29 | Citations (PDF) |
| 584 | The high-temperature creep properties of materials processed using severe plastic deformation | 0.4 | 9 | Citations (PDF) |
| 585 | Stability of microstructure in silver processed by severe plastic deformation | 0.4 | 3 | Citations (PDF) |
| 586 | Achieving superplastic behavior in fcc and hcp metals processed by equal-channel angular pressing | 6.3 | 33 | Citations (PDF) |
| 587 | On the feasibility of using a continuous processing technique incorporating a limited strain imposed by ECAP | 6.3 | 19 | Citations (PDF) |
| 588 | Microstructural characteristics of nickel processed to ultrahigh strains by high-pressure torsion | 6.3 | 39 | Citations (PDF) |
| 589 | Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion | 6.3 | 188 | Citations (PDF) |
| 590 | Evaluating the influence of pressure and torsional strain on processing by high-pressure torsion | 3.4 | 65 | Citations (PDF) |
| 591 | The role of Harper–Dorn creep at high temperatures and very low stresses | 3.4 | 13 | Citations (PDF) |
| 592 | An evaluation of microstructure and microhardness in copper subjected to ultra-high strains | 3.4 | 50 | Citations (PDF) |
| 593 | The development of internal cavitation in a superplastic zinc–aluminum alloy processed by ECAP | 3.4 | 18 | Citations (PDF) |
| 594 | Delayed microstructural recovery in silver processed by equal-channel angular pressing | 3.4 | 17 | Citations (PDF) |
| 595 | Developing superplasticity in a magnesium AZ31 alloy by ECAP | 3.4 | 92 | Citations (PDF) |
| 596 | Mechanical Properties of Bulk Nanocrystalline Aluminum-Tungsten Alloys | 2.1 | 49 | Citations (PDF) |
| 597 | Record Superplastic Ductility in a Magnesium Alloy Processed by Equal‐Channel Angular Pressing | 2.9 | 110 | Citations (PDF) |
| 598 | Enhanced Superplasticity in a Magnesium Alloy Processed by Equal‐Channel Angular Pressing with a Back‐Pressure | 2.9 | 68 | Citations (PDF) |
| 599 | Using high-pressure torsion for metal processing: Fundamentals and applications | 35.7 | 2,895 | Citations (PDF) |
| 600 | Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu–Zn alloys: Influence of stacking fault energy | 6.3 | 157 | Citations (PDF) |
| 601 | The significance of strain reversals during processing by high-pressure torsion | 6.3 | 157 | Citations (PDF) |
| 602 | Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys | 8.7 | 292 | Citations (PDF) |
| 603 | Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing | 8.7 | 46 | Citations (PDF) |
| 604 | Texture evolution by shear on two planes during ECAP of a high-strength aluminum alloy | 8.7 | 45 | Citations (PDF) |
| 605 | The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion | 8.7 | 181 | Citations (PDF) |
| 606 | Texture evolution in an aluminum alloy processed by ECAP with concurrent precipitate fragmentation | 6.3 | 34 | Citations (PDF) |
| 607 | The evolution of homogeneity on longitudinal sections during processing by ECAP | 6.3 | 70 | Citations (PDF) |
| 608 | Using high-pressure torsion for the cold-consolidation of copper chips produced by machining | 6.3 | 96 | Citations (PDF) |
| 609 | Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu–Zn alloys | 6.3 | 167 | Citations (PDF) |
| 610 | Evaluating plastic anisotropy in two aluminum alloys processed by equal-channel angular pressing | 6.3 | 43 | Citations (PDF) |
| 611 | Microstructure and yield strength of severely deformed silver | 5.4 | 56 | Citations (PDF) |
| 612 | Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion | 5.4 | 88 | Citations (PDF) |
| 613 | Microstructure and properties of pure titanium processed by equal-channel angular pressing at room temperature | 5.4 | 163 | Citations (PDF) |
| 614 | Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu | 5.4 | 262 | Citations (PDF) |
| 615 | Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density | 3.0 | 172 | Citations (PDF) |
| 616 | Ultrafine-grained materials: a personal perspective | 0.4 | 17 | Citations (PDF) |
| 617 | The Innovation Potential of Bulk Nanostructured Materials | 2.9 | 196 | Citations (PDF) |
| 618 | The evolution of homogeneity in processing by high-pressure torsion | 8.7 | 353 | Citations (PDF) |
| 619 | Influence of preliminary extrusion conditions on the superplastic properties of a magnesium alloy processed by ECAP | 8.7 | 131 | Citations (PDF) |
| 620 | The role of back pressure in the processing of pure aluminum by equal-channel angular pressing | 8.7 | 74 | Citations (PDF) |
| 621 | The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys | 8.7 | 188 | Citations (PDF) |
| 622 | The principles of grain refinement in equal-channel angular pressing | 6.3 | 330 | Citations (PDF) |
| 623 | A finite element analysis of the superplastic forming of an aluminum alloy processed by ECAP | 6.3 | 16 | Citations (PDF) |
| 624 | Microstructure and strength of severely deformed fcc metals | 6.3 | 104 | Citations (PDF) |
| 625 | Using X-ray microdiffraction to determine grain sizes at selected positions in disks processed by high-pressure torsion | 6.3 | 57 | Citations (PDF) |
| 626 | Influence of stacking fault energy on the minimum grain size achieved in severe plastic deformation | 6.3 | 127 | Citations (PDF) |
| 627 | The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys | 6.3 | 206 | Citations (PDF) |
| 628 | Microstructural characteristics of pure gold processed by equal-channel angular pressing | 5.4 | 35 | Citations (PDF) |
| 629 | Particle and grain growth in an Al–Si alloy during high-pressure torsion | 5.4 | 81 | Citations (PDF) |
| 630 | The evolution of delta-phase in a superplastic Inconel 718 alloy | 3.4 | 98 | Citations (PDF) |
| 631 | Influence of crystal orientation on the processing of copper single crystals by ECAP | 3.4 | 28 | Citations (PDF) |
| 632 | Fifty years of Harper–Dorn creep: a viable creep mechanism or a Californian artifact? | 3.4 | 34 | Citations (PDF) |
| 633 | The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP | 3.4 | 86 | Citations (PDF) |
| 634 | Characteristics of face-centered cubic metals processed by equal-channel angular pressing | 3.4 | 89 | Citations (PDF) |
| 635 | Principles of superplasticity in ultrafine-grained materials | 3.4 | 240 | Citations (PDF) |
| 636 | The processing of ultrafine-grained materials through the application of severe plastic deformation | 3.4 | 64 | Citations (PDF) |
| 637 | Developing Superplastic Ductilities in Ultrafine-Grained Metals | 2.1 | 28 | Citations (PDF) |
| 638 | Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy | 3.0 | 323 | Citations (PDF) |
| 639 | Influence of crystal orientation on ECAP of aluminum single crystals | 6.3 | 59 | Citations (PDF) |
| 640 | Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP | 6.3 | 105 | Citations (PDF) |
| 641 | Flow and cavitation in a quasi-superplastic two-phase magnesium–lithium alloy | 6.3 | 54 | Citations (PDF) |
| 642 | Mechanical characteristics of a Zn–22% Al alloy processed to very high strains by ECAP | 6.3 | 62 | Citations (PDF) |
| 643 | The development of superplastic ductilities and microstructural homogeneity in a magnesium ZK60 alloy processed by ECAP | 6.3 | 112 | Citations (PDF) |
| 644 | Flow processes at low temperatures in ultrafine-grained aluminum | 6.3 | 73 | Citations (PDF) |
| 645 | The aging characteristics of an Al–Ag alloy processed by equal-channel angular pressing | 6.3 | 39 | Citations (PDF) |
| 646 | An overview: Fatigue behaviour of ultrafine-grained metals and alloys | 6.0 | 204 | Citations (PDF) |
| 647 | Exceptional superplasticity in an AZ61 magnesium alloy processed by extrusion and ECAP | 6.3 | 131 | Citations (PDF) |
| 648 | Using ball-indentation to evaluate the properties of an ultrafine-grained Al–2% Si alloy processed by ECAP | 6.3 | 18 | Citations (PDF) |
| 649 | Grain boundary sliding revisited: Developments in sliding over four decades | 3.4 | 449 | Citations (PDF) |
| 650 | Principles of equal-channel angular pressing as a processing tool for grain refinement | 35.7 | 3,945 | Citations (PDF) |
| 651 | Producing bulk ultrafine-grained materials by severe plastic deformation | 2.0 | 1,452 | Citations (PDF) |
| 652 | Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum | 2.1 | 49 | Citations (PDF) |
| 653 | Experimental Evidence for Grain-Boundary Sliding in Ultrafine-Grained Aluminum Processed by Severe Plastic Deformation | 24.5 | 184 | Citations (PDF) |
| 654 | Simultaneously Increasing the Ductility and Strength of Ultra-Fine-Grained Pure Copper | 24.5 | 396 | Citations (PDF) |
| 655 | Evolution of microstructure and microtexture in fcc metals during high-pressure torsion | 3.4 | 128 | Citations (PDF) |
| 656 | Microstructural evolution in commercial purity aluminum during high-pressure torsion | 6.3 | 204 | Citations (PDF) |
| 657 | Achieving enhanced tensile ductility in an Al-6061 composite processed by severe plastic deformation | 6.3 | 32 | Citations (PDF) |
| 658 | Creep and superplasticity in a spray-cast aluminum alloy processed by ECA pressing | 6.3 | 23 | Citations (PDF) |
| 659 | Improving the high-temperature mechanical properties of a magnesium alloy by equal-channel angular pressing | 6.3 | 22 | Citations (PDF) |
| 660 | An analysis of superplastic flow after processing by ECAP | 6.3 | 26 | Citations (PDF) |
| 661 | Microstructure and properties of a low-carbon steel processed by equal-channel angular pressing | 6.3 | 47 | Citations (PDF) |
| 662 | Improving the superplastic properties of a two-phase Mg–8% Li alloy through processing by ECAP | 6.3 | 104 | Citations (PDF) |
| 663 | The microstructural characteristics of ultrafine-grained nickel | 6.3 | 189 | Citations (PDF) |
| 664 | Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion | 6.3 | 346 | Citations (PDF) |
| 665 | The evolution of homogeneity and grain refinement during equal-channel angular pressing: A model for grain refinement in ECAP | 6.3 | 245 | Citations (PDF) |
| 666 | Relationship between texture and low temperature superplasticity in an extruded AZ31 Mg alloy processed by ECAP | 6.3 | 262 | Citations (PDF) |
| 667 | Developing high-pressure torsion for use with bulk samples | 6.3 | 176 | Citations (PDF) |
| 668 | Flow processes in superplastic yttria-stabilized zirconia: A Deformation Limit Diagram | 6.3 | 14 | Citations (PDF) |
| 669 | Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion | 6.3 | 89 | Citations (PDF) |
| 670 | A quantitative study of cavity development in the tensile testing of an aluminum metal matrix composite processed by equal-channel angular pressing | 6.3 | 31 | Citations (PDF) |
| 671 | Influence of stacking fault energy on nanostructure formation under high pressure torsion | 6.3 | 196 | Citations (PDF) |
| 672 | Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing | 6.3 | 22 | Citations (PDF) |
| 673 | An investigation of the deformation process during equal-channel angular pressing of an aluminum single crystal | 6.3 | 33 | Citations (PDF) |
| 674 | Using the stress–strain relationships to propose regions of low and high temperature plastic deformation in aluminum | 6.3 | 26 | Citations (PDF) |
| 675 | The significance of grain boundary sliding in the superplastic Zn–22% Al alloy after processing by ECAP | 6.3 | 52 | Citations (PDF) |
| 676 | Cavitation and failure in a fine-grained Inconel 718 alloy having potential superplastic properties | 6.3 | 22 | Citations (PDF) |
| 677 | Mechanical behavior of a 6061 Al alloy and an Al2O3/6061 Al composite after equal-channel angular processing | 6.3 | 11 | Citations (PDF) |
| 678 | Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion | 6.3 | 185 | Citations (PDF) |
| 679 | An analysis of the shear zone for metals deformed by equal-channel angular processing | 6.3 | 34 | Citations (PDF) |
| 680 | Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy | 8.7 | 169 | Citations (PDF) |
| 681 | An investigation of cavity growth in a superplastic aluminum alloy processed by ECAP | 8.7 | 43 | Citations (PDF) |
| 682 | Achieving High Strength and High Ductility in Precipitation-Hardened Alloys | 24.5 | 288 | Citations (PDF) |
| 683 | Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials | 6.3 | 117 | Citations (PDF) |
| 684 | Grain refinement and superplasticity in a magnesium alloy processed by equal-channel angular pressing | 2.1 | 66 | Citations (PDF) |
| 685 | Processing by equal-channel angular pressing: Applications to grain boundary engineering | 3.4 | 35 | Citations (PDF) |
| 686 | Identifying creep mechanisms in plastic flow | 0.4 | 51 | Citations (PDF) |
| 687 | Performance and applications of nanostructured materials produced by severe plastic deformation | 5.4 | 292 | Citations (PDF) |
| 688 | Using Equal-Channel Angular Pressing for the Production of Superplastic Aluminum and Magnesium Alloys | 1.6 | 32 | Citations (PDF) |
| 689 | Creep properties of a fiber-reinforced magnesium alloy | 3.4 | 14 | Citations (PDF) |
| 690 | Effect of Mg addition on microstructure and mechanical properties of aluminum | 6.3 | 156 | Citations (PDF) |
| 691 | The fundamentals of nanostructured materials processed by severe plastic deformation | 2.0 | 193 | Citations (PDF) |
| 692 | Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation | 2.1 | 58 | Citations (PDF) |
| 693 | Using grain boundary engineering to evaluate the diffusion characteristics in ultrafine-grained Al–Mg and Al–Zn alloys | 6.3 | 90 | Citations (PDF) |
| 694 | The application of equal-channel angular pressing to an aluminum single crystal | 8.7 | 108 | Citations (PDF) |
| 695 | Microstructural development in equal-channel angular pressing using a 60° die | 8.7 | 85 | Citations (PDF) |
| 696 | A new constitutive relationship for the homogeneous deformation of metals over a wide range of strain | 8.7 | 134 | Citations (PDF) |
| 697 | Severe plastic deformation as a processing tool for developing superplastic metals | 6.0 | 66 | Citations (PDF) |
| 698 | Factors influencing microstructural development in equal-channel angular pressing | 3.3 | 45 | Citations (PDF) |
| 699 | The creep behavior of discontinuously reinforced metal-matrix composites | 2.0 | 31 | Citations (PDF) |
| 700 | Influence of a round corner die on flow homogeneity in ECA pressing | 5.4 | 98 | Citations (PDF) |
| 701 | Comment on the role of intragranular dislocations in superplastic yttria-stabilized zirconia | 5.4 | 23 | Citations (PDF) |
| 702 | Characteristics of superplasticity in an ultrafine-grained aluminum alloy processed by ECA pressing | 5.4 | 82 | Citations (PDF) |
| 703 | Achieving a Superplastic Forming Capability through Severe Plastic Deformation | 2.9 | 42 | Citations (PDF) |
| 704 | Developing a superplastic forming capability in a commercial aluminum alloy without scandium or zirconium additions | 6.3 | 56 | Citations (PDF) |
| 705 | A model investigation of the shearing characteristics in equal-channel angular pressing | 6.3 | 36 | Citations (PDF) |
| 706 | Achieving superplasticity in ultrafine-grained copper: influence of Zn and Zr additions | 6.3 | 61 | Citations (PDF) |
| 707 | Using atomic force microscopy to evaluate the development of mesoscopic shear planes in materials processed by severe plastic deformation | 6.3 | 41 | Citations (PDF) |
| 708 | Equal-channel angular pressing using plate samples | 6.3 | 85 | Citations (PDF) |
| 709 | Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion | 8.7 | 773 | Citations (PDF) |
| 710 | Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy | 8.7 | 228 | Citations (PDF) |
| 711 | Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP | 8.7 | 361 | Citations (PDF) |
| 712 | Developing superplasticity in a spray-cast aluminum 7034 alloy through equal-channel angular pressing | 2.5 | 33 | Citations (PDF) |
| 713 | Characteristics of diffusion in Al-Mg alloys with ultrafine grain sizes | 0.8 | 78 | Citations (PDF) |
| 714 | Réalisation de superplasticité à grande vitesse dans des alliages Al_Mg_Sc_Zr par utilisation de l'extrusion dans des canaux déviés | 0.6 | 22 | Citations (PDF) |
| 715 | Orientation imaging microscopy of ultrafine-grained nickel | 5.4 | 228 | Citations (PDF) |
| 716 | A two-step processing route for achieving a superplastic forming capability in dilute magnesium alloys | 5.4 | 139 | Citations (PDF) |
| 717 | An investigation of microstructure and grain-boundary evolution during ECA pressing of pure aluminum | 2.1 | 222 | Citations (PDF) |
| 718 | Creep at low stresses: An evaluation of diffusion creep and Harper-Dorn creep as viable creep mechanisms | 2.1 | 92 | Citations (PDF) |
| 719 | Creep processes in magnesium alloys and their composites | 2.1 | 34 | Citations (PDF) |
| 720 | Thermal stability and microstructural evolution in ultrafine-grained nickel after equal-channel angular pressing (ECAP) | 2.1 | 53 | Citations (PDF) |
| 721 | Factors contributing to creep strengthening in discontinuously-reinforced materials | 6.3 | 20 | Citations (PDF) |
| 722 | The role of matrix microstructure in the creep behaviour of discontinuous fiber-reinforced AZ 91 magnesium alloy | 6.3 | 22 | Citations (PDF) |
| 723 | Creep properties of an Al-2024 composite reinforced with SiC particulates | 6.3 | 45 | Citations (PDF) |
| 724 | Factors influencing the shearing patterns in equal-channel angular pressing | 6.3 | 228 | Citations (PDF) |
| 725 | An evaluation of the creep characteristics of an AZ91 magnesium alloy composite using acoustic emission | 6.3 | 17 | Citations (PDF) |
| 726 | Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al–Mg alloys | 8.7 | 343 | Citations (PDF) |
| 727 | Processing of a low-carbon steel by equal-channel angular pressing | 8.7 | 218 | Citations (PDF) |
| 728 | The use of severe plastic deformation for microstructural control | 6.3 | 163 | Citations (PDF) |
| 729 | Grain refinement of pure nickel using equal-channel angular pressing | 6.3 | 132 | Citations (PDF) |
| 730 | Characteristics of thermal cycling in a magnesium alloy composite | 6.3 | 18 | Citations (PDF) |
| 731 | Title is missing! | 3.4 | 42 | Citations (PDF) |
| 732 | Creep processes in magnesium alloys and their composites | 2.1 | 22 | Citations (PDF) |
| 733 | Characteristics of diffusion in Al-Mg alloys with ultrafine grain sizes | 0.8 | 6 | Citations (PDF) |
| 734 | Achieving Superplasticity and Superplastic Forming through Severe Plastic Deformation | 0.1 | 2 | Citations (PDF) |
| 735 | An evaluation of the flow behavior during high strain rate superplasticity in an Al-Mg-Sc alloy | 2.1 | 26 | Citations (PDF) |
| 736 | An evaluation of the flow behavior during high strain rate superplasticity in an Al−Mg−Sc alloy | 2.1 | 55 | Citations (PDF) |
| 737 | Influence of magnesium on grain refinement and ductility in a dilute AlâSc alloy | 8.7 | 131 | Citations (PDF) |
| 738 | Optimizing the procedure of equal-channel angular pressing for maximum superplasticity | 6.3 | 137 | Citations (PDF) |
| 739 | Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation | 6.3 | 640 | Citations (PDF) |
| 740 | Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy | 6.3 | 45 | Citations (PDF) |
| 741 | The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties | 6.3 | 235 | Citations (PDF) |
| 742 | Improvement of mechanical properties for Al alloys using equal-channel angular pressing | 6.7 | 255 | Citations (PDF) |
| 743 | Title is missing! | 1.0 | 5 | Citations (PDF) |
| 744 | Title is missing! | 3.4 | 418 | Citations (PDF) |
| 745 | Low-temperature superplasticity in a Cu–Zn–Sn alloy processed by severe plastic deformation | 6.3 | 66 | Citations (PDF) |
| 746 | Constitutive equations for hot deformation of an Al-6061/20%Al2O3 composite | 6.3 | 44 | Citations (PDF) |
| 747 | Deformation heating and its effect on grain size evolution during equal channel angular extrusion | 5.4 | 59 | Citations (PDF) |
| 748 | Estimating the equivalent strain in equal-channel angular pressing | 5.4 | 62 | Citations (PDF) |
| 749 | Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP | 5.4 | 122 | Citations (PDF) |
| 750 | Microhardness and microstructural evolution in pure nickel during high-pressure torsion | 5.4 | 291 | Citations (PDF) |
| 751 | Achieving superplasticity in a Cu–40%Zn alloy through severe plastic deformation | 5.4 | 59 | Citations (PDF) |
| 752 | Grain boundary structure in Al–Mg and Al–Mg–Sc alloys after equal-channel angular pressing | 2.5 | 66 | Citations (PDF) |
| 753 | Achieving superplasticity at high strain rates using equal channel angular pressing | 1.8 | 11 | Citations (PDF) |
| 754 | Influence of pressing temperature on microstructural development in equal-channel angular pressing | 6.3 | 207 | Citations (PDF) |
| 755 | Development of a multi-pass facility for equal-channel angular pressing to high total strains | 6.3 | 242 | Citations (PDF) |
| 756 | Superplastic forming at high strain rates after severe plastic deformation | 8.7 | 309 | Citations (PDF) |
| 757 | Identifiying creep mechanisms at low stresses | 6.3 | 140 | Citations (PDF) |
| 758 | Using equal-channel angular pressing for refining grain size | 2.0 | 205 | Citations (PDF) |
| 759 | Equal-channel angular pressing of commercial aluminum alloys: Grain refinement, thermal stability and tensile properties | 2.1 | 427 | Citations (PDF) |
| 760 | Influence of scandium on superplastic ductilities in an Al–Mg–Sc alloy | 2.5 | 53 | Citations (PDF) |
| 761 | Development of fine grained structures using severe plastic deformation | 1.8 | 117 | Citations (PDF) |
| 762 | Title is missing! | 3.4 | 55 | Citations (PDF) |
| 763 | Characteristics of creep deformation in discontinuously reinforced metal matrix composites | 1.8 | 12 | Citations (PDF) |
| 764 | An examination of the flow process in superplastic yttria-stabilized tetragonal zirconia | 8.7 | 70 | Citations (PDF) |
| 765 | A unified interpretation of threshold stresses in the creep and high strain rate superplasticity of metal matrix composites | 8.7 | 90 | Citations (PDF) |
| 766 | An examination of a substructure-invariant model for the creep of metal matrix composites | 6.3 | 41 | Citations (PDF) |
| 767 | Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions | 6.3 | 197 | Citations (PDF) |
| 768 | Developing superplastic properties in an aluminum alloy through severe plastic deformation | 6.3 | 102 | Citations (PDF) |
| 769 | Influence of pressing speed on microstructural development in equal-channel angular pressing | 2.1 | 148 | Citations (PDF) |
| 770 | Creep behavior of an AZ91 magnesium alloy reinforced with alumina fibers | 2.1 | 42 | Citations (PDF) |
| 771 | Fundamental aspects of creep in metal matrix composites | 2.1 | 39 | Citations (PDF) |
| 772 | Significance of adiabatic heating in equal-channel angular pressing | 5.4 | 104 | Citations (PDF) |
| 773 | Metallographic investigation of reinforcement damage in creep of an AZ 91 matrix composite | 2.5 | 13 | Citations (PDF) |
| 774 | Creep behavior of a reinforced Al-7005 alloy: Implications for the creep processes in metal matrix composites | 8.7 | 75 | Citations (PDF) |
| 775 | High strain rate superplasticity in an Al-Mg alloy containing scandium | 5.4 | 124 | Citations (PDF) |
| 776 | Strengthening and grain refinement in an Al-6061 metal matrix composite through intense plastic straining | 5.4 | 92 | Citations (PDF) |
| 777 | Equal-channel angular pressing: A novel tool for microstructural control | 0.3 | 84 | Citations (PDF) |
| 778 | Optimizing the rotation conditions for grain refinement in equal-channel angular pressing | 2.1 | 227 | Citations (PDF) |
| 779 | Fabrication of bulk ultrafine-grained materials through intense plastic straining | 2.1 | 126 | Citations (PDF) |
| 780 | Microstructural characteristics of ultrafine-grained aluminum produced using equal-channel angular pressing | 2.1 | 265 | Citations (PDF) |
| 781 | Age hardening and the potential for superplasticity in a fine-grained Al-Mg-Li-Zr alloy | 2.1 | 40 | Citations (PDF) |
| 782 | Factors influencing the equilibrium grain size in equal-channel angular pressing: Role of Mg additions to aluminum | 2.1 | 279 | Citations (PDF) |
| 783 | A comparison of the creep properties of an Al-6092 composite and the unreinforced matrix alloy | 2.1 | 67 | Citations (PDF) |
| 784 | Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size | 6.3 | 144 | Citations (PDF) |
| 785 | An examination of the effect of processing procedure on the creep of metal matrix composites | 6.3 | 36 | Citations (PDF) |
| 786 | The characteristics of microcavitation in high strain rate superplasticity | 6.3 | 6 | Citations (PDF) |
| 787 | The shearing characteristics associated with equal-channel angular pressing | 6.3 | 911 | Citations (PDF) |
| 788 | Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing | 8.7 | 412 | Citations (PDF) |
| 789 | The process of grain refinement in equal-channel angular pressing | 8.7 | 1,198 | Citations (PDF) |
| 790 | High strain rate superplasticity in metal matrix composites: the role of load transfer | 8.7 | 57 | Citations (PDF) |
| 791 | Requirements for achieving high-strain-rate superplasticity in cast aluminium alloys | 1.1 | 70 | Citations (PDF) |
| 792 | Factors influencing the flow and hardness of materials with ultrafine grain sizes | 0.8 | 83 | Citations (PDF) |
| 793 | A simple procedure for estimating threshold stresses in the creep of metal matrix composites | 5.4 | 133 | Citations (PDF) |
| 794 | OBSERVATIONS OF HIGH STRAIN RATE SUPERPLASTICITY IN COMMERCIAL ALUMINUM ALLOYS WITH ULTRAFINE GRAIN SIZES | 5.4 | 301 | Citations (PDF) |
| 795 | A new miniature mechanical testing procedure: Application to intermetallics | 2.1 | 7 | Citations (PDF) |
| 796 | An examination of creep data for an Al-Mg composite | 2.1 | 23 | Citations (PDF) |
| 797 | Creep behavior of an aluminum 2024 alloy produced by powder metallurgy | 8.7 | 81 | Citations (PDF) |
| 798 | An investigation of microstructural evolution during equal-channel angular pressing | 8.7 | 794 | Citations (PDF) |
| 799 | Structural evolution and the Hall-Petch relationship in an AlMgLiZr alloy with ultra-fine grain size | 8.7 | 190 | Citations (PDF) |
| 800 | Creep behavior of an Al-6061 metal matrix composite reinforced with alumina particulates | 8.7 | 104 | Citations (PDF) |
| 801 | Characteristics of grain boundary migration and sliding during fatigue of high purity lead | 6.3 | 3 | Citations (PDF) |
| 802 | Creep behavior of an Al-6061 metal matrix composite produced by liquid metallurgy processing | 6.3 | 23 | Citations (PDF) |
| 803 | A simple technique for the preparation of tensile specimens of yttria-stabilized zirconia | 2.5 | 5 | Citations (PDF) |
| 804 | Principle of equal-channel angular pressing for the processing of ultra-fine grained materials | 5.4 | 1,732 | Citations (PDF) |
| 805 | A method of distinguishing between diffusion creep and Harper-Dorn creep at low stress levels | 5.4 | 28 | Citations (PDF) |
| 806 | An evaluation of the creep properties of two Al-Si alloys produced by rapid solidification processing | 2.1 | 19 | Citations (PDF) |
| 807 | The characteristics of cavitation in superplastic metals and ceramics | 2.1 | 14 | Citations (PDF) |
| 808 | The inter-relationship between grain boundary sliding and cavitation during creep of polycrystalline copper | 2.1 | 26 | Citations (PDF) |
| 809 | A model study of cavity growth in superplasticity using single premachined holes | 2.1 | 10 | Citations (PDF) |
| 810 | Microstructural characteristics of an ultrafine grain metal processed with equal-channel angular pressing | 5.0 | 37 | Citations (PDF) |
| 811 | Evolution of grain boundary structure in submicrometer-grained Al-Mg alloy | 5.0 | 32 | Citations (PDF) |
| 812 | The development of cavitation in superplastic aluminum composites reinforced with Si3N4 | 6.3 | 21 | Citations (PDF) |
| 813 | Low stress creep behavior: An examination of Nabarro—Herring and Harper—Dorn creep | 6.3 | 47 | Citations (PDF) |
| 814 | Enhanced grain growth in an Al-Mg alloy with ultrafine grain size | 6.3 | 91 | Citations (PDF) |
| 815 | Significance of continuous precipitation during creep of a powder mettallurgy aluminum alloy | 6.3 | 22 | Citations (PDF) |
| 816 | An investigation of microstructural stability in an AlMg alloy with submicrometer grain size | 8.7 | 310 | Citations (PDF) |
| 817 | Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size | 8.7 | 481 | Citations (PDF) |
| 818 | An examination of creep behaviour at low stresses in non-metallic materials | 1.0 | 7 | Citations (PDF) |
| 819 | Fracture behaviour at elevated temperatures of alumina matrix composites reinforced with silicon carbide whiskers | 3.4 | 3 | Citations (PDF) |
| 820 | An Investigation of the Role of Processing in the High Temperature Creep of Whisker-Reinforced Alumina Composites | 4.6 | 0 | Citations (PDF) |
| 821 | Processing and superplastic properties of fine grained Si3N4/Al–Mg–Si composites | 1.8 | 18 | Citations (PDF) |
| 822 | Examination of fracture surfaces of SiC whisker-reinforced alumina after high temperature creep deformation | 1.0 | 2 | Citations (PDF) |
| 823 | The age-hardening characteristics of an AI-6061/AI2O3 metal matrix composite | 2.1 | 23 | Citations (PDF) |
| 824 | An investigation of strain hardening and creep in an AI-6061/AI2O3 metal matrix composite | 2.1 | 25 | Citations (PDF) |
| 825 | Microstructural examination of a superplastic yttria-stabilized zirconia: Implications for the superplasticity mechanism | 1.5 | 57 | Citations (PDF) |
| 826 | High temperature deformation of an alumina composite reinforced with silicon carbide whiskers | 1.5 | 12 | Citations (PDF) |
| 827 | Yield stress measurements on an Al-1.5% Mg alloy with submicron grain size using a miniature bending procedure | 2.5 | 10 | Citations (PDF) |
| 828 | Processing and superplastic properties of fine grained Si<SUB>3</SUB>N<SUB>4</SUB>/Al–Mg–Si composites | 1.8 | 15 | Citations (PDF) |
| 829 | The toughening and strengthening of ceramic materials through discontinuous reinforcement | 3.4 | 78 | Citations (PDF) |
| 830 | An investigation of grain rotation and grain elongation in a superplastic alloy | 6.3 | 17 | Citations (PDF) |
| 831 | An evaluation of the strain contributed by grain boundary sliding in superplasticity | 6.3 | 260 | Citations (PDF) |
| 832 | Factors Influencing the Exceptional Ductility of a Superplastic Pb-62 pct Sn alloy | 2.1 | 42 | Citations (PDF) |
| 833 | Evidence for Anelastic Creep Recovery in Silicon Carbide-Whisker-Reinforced Alumina | 3.7 | 17 | Citations (PDF) |
| 834 | A critical assessment of flow and cavity formation in a superplastic yttria-stabilized zirconia | 1.5 | 59 | Citations (PDF) |
| 835 | An investigation of the role of a liquid phase in AlCuMg metal matrix composites exhibiting high strain rate superplasticity | 1.5 | 117 | Citations (PDF) |
| 836 | A unified approach to grain boundary sliding in creep and superplasticity | 1.5 | 549 | Citations (PDF) |
| 837 | An evaluation of the rate-controlling flow process in Harper-Dorn creep | 1.5 | 35 | Citations (PDF) |
| 838 | Superplastic-like flow in ceramics: Recent developments and potentials applications | 5.4 | 11 | Citations (PDF) |
| 839 | The role of grain boundaries in high temperature deformation | 6.3 | 79 | Citations (PDF) |
| 840 | Future research directions for interface engineering in high temperature plasticity | 6.3 | 17 | Citations (PDF) |
| 841 | An examination of the implications of void growth in submicrometer and nanocrystalline structures | 6.3 | 23 | Citations (PDF) |
| 842 | Superplasticity in advanced materials | 24.8 | 353 | Citations (PDF) |
| 843 | An investigation of the role of intragranular dislocation strain in the superplastic Pb-62% Sn eutectic alloy | 1.5 | 156 | Citations (PDF) |
| 844 | Observations on the use of a fractal model to predict superplastic ductility | 0.4 | 3 | Citations (PDF) |
| 845 | Structural Evolution and Deformation in an Aluminum-Based Solid Solution Alloy with Submicron Grain Size | 0.1 | 1 | Citations (PDF) |
| 846 | Observations on diffusional cavity growth in superplastic materials | 0.4 | 5 | Citations (PDF) |
| 847 | A first report on the use of a non-destructive technique to investigate cavitation in a superplastic aluminum alloy | 0.4 | 7 | Citations (PDF) |
| 848 | An examination of the metals deforming by Harper-Dorn creep at high homologous temperatures | 6.3 | 18 | Citations (PDF) |
| 849 | Creep behavior of copper at intermediate temperatures—III. A comparison with theory | 1.5 | 24 | Citations (PDF) |
| 850 | Creep behavior of copper at intermediate temperatures—II. Surface microstructural observations | 1.5 | 17 | Citations (PDF) |
| 851 | The physics of superplastic deformation | 6.3 | 146 | Citations (PDF) |
| 852 | Characteristics of creep deformation in ceramics | 1.8 | 79 | Citations (PDF) |
| 853 | Characteristics of creep deformation in ceramics | 1.8 | 14 | Citations (PDF) |
| 854 | A Re-Appraisal of Cavity Growth Processes in Superplasticity | 0.1 | 4 | Citations (PDF) |
| 855 | A Quantitative Study of Cavity Evolution in An Al-Cu-Zr Alloy | 0.1 | 0 | Citations (PDF) |
| 856 | An Investigation of the Mechanical Behavior of a Superplastic Yttria-Stabilized Zirconia | 0.1 | 4 | Citations (PDF) |
| 857 | Superplastic ceramics: They’re not a stretch of the imagination anymore | 2.0 | 13 | Citations (PDF) |
| 858 | Superplasticity in ceramics | 3.4 | 138 | Citations (PDF) |
| 859 | Superplasticity of steels and ferrous alloys | 6.3 | 38 | Citations (PDF) |
| 860 | The nucleation and growth of cavities in a superplastic quasi-single phase copper alloy | 1.5 | 46 | Citations (PDF) |
| 861 | Cyclic grain boundary migration and sliding in pure aluminum | 1.5 | 4 | Citations (PDF) |
| 862 | CYCLIC GRAIN BOUNDARY MIGRATION AND CAVITATION IN THE PRESENCE OF DISPERSED PRECIPITATE PARTICLES | 0.0 | 0 | Citations (PDF) |
| 863 | The influence of rolling direction on the mechanical behavior and formation of cavity stringers in the superplastic Zn-22% Al alloy | 2.3 | 53 | Citations (PDF) |
| 864 | Creep behavior of copper at intermediate temperatures—I. Mechanical characteristics | 2.3 | 120 | Citations (PDF) |
| 865 | A determination of the structural dependence of cyclic migration in polycrystalline aluminum using electron channeling pattern analysis | 2.3 | 20 | Citations (PDF) |
| 866 | An examination of cyclic grain boundary migration and cavitation in an Al-3% Mg solid solution alloy | 2.3 | 13 | Citations (PDF) |
| 867 | Cavitation and fracture in the superplastic Al-33% Cu eutectic alloy | 3.4 | 33 | Citations (PDF) |
| 868 | Superplasticity in Al–33Cu eutectic alloy in as extruded condition | 1.8 | 5 | Citations (PDF) |
| 869 | Superplasticity in Al–33Cu eutectic alloy in as extruded condition | 1.8 | 3 | Citations (PDF) |
| 870 | Creep of ceramics | 3.4 | 265 | Citations (PDF) |
| 871 | An investigation of grain boundary sliding in superplasticity at high elongations | 3.4 | 89 | Citations (PDF) |
| 872 | The mechanical properties of the superplastic AI- 33 Pct Cu eutectic alloy | 0.8 | 30 | Citations (PDF) |
| 873 | Mechanical Properties of Discontinuous SiC Reinforced Aluminum Composites at Elevated Temperatures | 1.7 | 136 | Citations (PDF) |
| 874 | Principles of superplastic diffusion bonding | 1.8 | 26 | Citations (PDF) |
| 875 | The Mechanical Properties at High Temperatures of SiC Whisker-Reinforced Alumina | 0.1 | 12 | Citations (PDF) |
| 876 | Principles of superplastic diffusion bonding | 1.8 | 3 | Citations (PDF) |
| 877 | CYCLIC MIGRATION AND FRACTURE IN SOLID SOLUTION ALLOYS | 0.0 | 0 | Citations (PDF) |
| 878 | The activation energy for superplastic deformation in the Al-33% Cu eutectic alloy | 1.2 | 13 | Citations (PDF) |
| 879 | A model for diffusional cavity growth in superplasticity | 2.3 | 123 | Citations (PDF) |
| 880 | The role of matrix dislocations in the superplastic deformation of a copper alloy | 2.3 | 69 | Citations (PDF) |
| 881 | Deformation mechanism maps for applications at high temperatures | 5.4 | 0 | Citations (PDF) |
| 882 | The deviation from creep by viscous glide in solid solution alloys at high stresses—I. Characteristics of the dragging stress | 2.3 | 52 | Citations (PDF) |
| 883 | Cyclic grain boundary migration during high temperature fatigue—II. Measurements of grain boundary sliding | 2.3 | 17 | Citations (PDF) |
| 884 | Cavitation in high purity aluminium during fatigue at elevated temperatures | 1.0 | 14 | Citations (PDF) |
| 885 | Ductility of the superplastic Pb-Sn eutectic at room temperature | 1.0 | 30 | Citations (PDF) |
| 886 | The effect of grain size on ductility in the superplastic Pb-Sn eutectic | 1.0 | 16 | Citations (PDF) |
| 887 | Observations of cyclic grain boundary migration in aluminium after large numbers of fatigue cycles | 1.0 | 12 | Citations (PDF) |
| 888 | Grain boundary sliding at high temperatures in torsional fatigue | 1.0 | 8 | Citations (PDF) |
| 889 | The influence of prestrain on ductility in the superplastic Pb-Sn eutectic alloy | 3.4 | 7 | Citations (PDF) |
| 890 | Strain distribution in the superplastic Pb-Sn eutectic alloy | 3.4 | 5 | Citations (PDF) |
| 891 | Creep of ceramics | 3.4 | 364 | Citations (PDF) |
| 892 | An experimental investigation of the orthogonal (diamond) grain configuration in high temperature fatigue | 3.4 | 14 | Citations (PDF) |
| 893 | Cyclic grain boundary migration during high temperature fatigue—I. Microstructural observations | 2.3 | 41 | Citations (PDF) |
| 894 | An examination of grain boundary migration during high temperature fatigue of aluminum—I. Microstructural observations | 2.3 | 32 | Citations (PDF) |
| 895 | An examination of grain boundary migration during high temperature fatigue of aluminum—II. Measurements of migration | 2.3 | 9 | Citations (PDF) |
| 896 | A detailed appraisal of steady state flow data for the superplastic Zn-22% Al Alloy | 0.2 | 14 | Citations (PDF) |
| 897 | A recommended procedure for determining the strain rate sensitivity in superplasticity | 1.2 | 7 | Citations (PDF) |
| 898 | The universal nature of the third power stress dependence for steady-state creep | 1.2 | 20 | Citations (PDF) |
| 899 | Simple reverse bending machine for low cycle fatigue at elevated temperatures | 1.5 | 11 | Citations (PDF) |
| 900 | On the possibility of Harper-Dorn creep in non-metallic crystals | 0.8 | 34 | Citations (PDF) |
| 901 | Fracture processes in superplastic flow | 0.8 | 136 | Citations (PDF) |
| 902 | The mechanical properties of superplastic materials | 0.8 | 431 | Citations (PDF) |
| 903 | The significance of the dimensionless constant in the rate equation for superplastic flow | 0.8 | 7 | Citations (PDF) |
| 904 | Deformation mechanisms in h.c.p. metals at elevated temperatures—II. Creep behavior of a Mg-0.8% Al solid solution alloy | 2.3 | 230 | Citations (PDF) |
| 905 | An investigation of harper-dorn creep—I. Mechanical and microstructural characteristics | 2.3 | 94 | Citations (PDF) |
| 906 | An evaluation of the roles of intercrystalline and interphase boundary sliding in two-phase superplastic alloys | 2.3 | 109 | Citations (PDF) |
| 907 | An investigation of Harper-Dorn creep—II. The flow process | 2.3 | 71 | Citations (PDF) |
| 908 | An examination of the breakdown in creep by viscous glide in solid solution alloys at high stress levels | 2.3 | 282 | Citations (PDF) |
| 909 | A comparison of constant strain rate and creep testing procedures in superplasticity | 3.4 | 7 | Citations (PDF) |
| 910 | A critical evaluation of the concept of a universal parameter to uniquely specify high temperature creep mechanisms | 1.2 | 1 | Citations (PDF) |
| 911 | Observations on the differences reported in region I for the superplastic Zn-22% Al eutectoid | 1.2 | 25 | Citations (PDF) |
| 912 | Deformation mechanisms in h.c.p. metals at elevated temperatures—I. Creep behavior of magnesium | 2.3 | 291 | Citations (PDF) |
| 913 | Flow localization and neck formation in a superplastic metal | 2.3 | 58 | Citations (PDF) |
| 914 | Creep and substructure formation in an Al-5% Mg solid solution alloy | 2.3 | 213 | Citations (PDF) |
| 915 | Observations on the magnitude of grain boundary sliding in Region 1 of superplasticity | 3.4 | 30 | Citations (PDF) |
| 916 | A microstructural examination of the flow behaviour of a superplastic copper alloy | 3.4 | 16 | Citations (PDF) |
| 917 | Deformation mechanism maps for applications at high temperatures | 0.2 | 11 | Citations (PDF) |
| 918 | Density measurements as an assessment of creep damage and cavity growth | 0.8 | 30 | Citations (PDF) |
| 919 | A cavity growth diagram for high temperature creep | 1.2 | 17 | Citations (PDF) |
| 920 | Independent and sequential cavity growth mechanisms | 1.2 | 11 | Citations (PDF) |
| 921 | Cyclic grain boundary migration in aluminum during high temperature fatigue | 1.2 | 15 | Citations (PDF) |
| 922 | An investigation of intercrystalline and interphase boundary sliding in the superplastic Pb-62% Sn eutectic | 2.3 | 131 | Citations (PDF) |
| 923 | An analysis of cavitation failure incorporating cavity nucleation with strain | 0.2 | 17 | Citations (PDF) |
| 924 | Further comments on theories of structural superplasticity | 0.2 | 10 | Citations (PDF) |
| 925 | Neck formation and cavitation in the superplastic Zn-22% Al eutectoid | 3.4 | 56 | Citations (PDF) |
| 926 | Creep fracture maps for 316 stainless steel | 0.8 | 49 | Citations (PDF) |
| 927 | An analysis of cavity growth during superplasticity | 0.8 | 62 | Citations (PDF) |
| 928 | A first report of cyclic grain boundary migration during high temperature fatigue | 1.2 | 19 | Citations (PDF) |
| 929 | Flow and Failure of Superplastic Materials | 7.0 | 80 | Citations (PDF) |
| 930 | A Microscopic Examination Of Void Formation In Superplastic Materials | 1.7 | 9 | Citations (PDF) |
| 931 | The incorporation of ambipolar diffusion in deformation mechanism maps for ceramics | 3.4 | 39 | Citations (PDF) |
| 932 | The fracture characteristics of a superplastic single phase copper alloy | 3.4 | 58 | Citations (PDF) |
| 933 | A simple method of constructing an Ashby-type deformation mechanism map | 3.4 | 72 | Citations (PDF) |
| 934 | Observations on the analysis of interdependent creep processes | 3.4 | 4 | Citations (PDF) |
| 935 | A new type of deformation mechanism map for high-temperature creep | 0.2 | 100 | Citations (PDF) |
| 936 | Evidence for cavitation in superplastic Zn-22 pct Ai of very high purity | 0.8 | 39 | Citations (PDF) |
| 937 | The mechanical properties of a superplastic quasi-single phase copper alloy | 2.3 | 64 | Citations (PDF) |
| 938 | The activation energies for plastic flow in a superplastic copper alloy | 2.3 | 26 | Citations (PDF) |
| 939 | The activation energies for superplasticity | 1.2 | 34 | Citations (PDF) |
| 940 | The relationship between strain rate sensitivity and ductility in superplastic materials | 1.2 | 31 | Citations (PDF) |
| 941 | The transition from Nabarro-Herring to Harper-Dorn creep at low stress levels | 1.2 | 16 | Citations (PDF) |
| 942 | Exceptional ductility in the superplastic Pb-62 Pct Sn eutectic | 0.8 | 84 | Citations (PDF) |
| 943 | Factors influencing ductility in the superplastic Zn-22 Pct Al eutectoid | 0.8 | 209 | Citations (PDF) |
| 944 | Deformation mechanism maps for superplastic materials | 1.2 | 115 | Citations (PDF) |
| 945 | Structural ceramics | 35.7 | 128 | Citations (PDF) |
| 946 | Deformation mechanism maps for ceramics | 3.4 | 31 | Citations (PDF) |
| 947 | The determination of the activation energy for superplastic flow | 0.0 | 44 | Citations (PDF) |
| 948 | Structural ceramics | 35.7 | 161 | Citations (PDF) |
| 949 | Deformation Mechanism Maps: Their Use in Predicting Creep Behavior | 1.7 | 18 | Citations (PDF) |
| 950 | Grain-Boundary Sliding and Axial Strain during Diffusional Creep | 0.8 | 21 | Citations (PDF) |
| 951 | Creep behavior of Ni-W solid solutions | 0.8 | 15 | Citations (PDF) |
| 952 | Creep at low stress levels in the superplastic Zn-22% Al eutectoid | 2.3 | 169 | Citations (PDF) |
| 953 | The activation energies associated with superplastic flow | 2.3 | 142 | Citations (PDF) |
| 954 | Creep Behavior of Ceramic Solid-Solution Alloys | 3.7 | 15 | Citations (PDF) |
| 955 | Grain-Boundary Sliding During Creep of MgO | 3.7 | 22 | Citations (PDF) |
| 956 | Creep behaviour in the superplastic Pb–62% Sn eutectic | 1.9 | 151 | Citations (PDF) |
| 957 | Deformation mechanism maps for solid solution alloys | 1.2 | 25 | Citations (PDF) |
| 958 | Method of estimating stacking‐fault energies in alkali halide crystals using creep data | 2.0 | 53 | Citations (PDF) |
| 959 | Evidence for Coble creep in the relaxation of surface‐compressive stresses in tempered polycrystalline aluminum oxide | 2.0 | 9 | Citations (PDF) |
| 960 | The transition from dislocation climb to viscous glide in creep of solid solution alloys | 2.3 | 507 | Citations (PDF) |
| 961 | The portevin-le chatelier effect in Cu3Au | 2.3 | 40 | Citations (PDF) |
| 962 | Deformation mechanism maps based on grain size | 0.8 | 262 | Citations (PDF) |
| 963 | The transition from dislocation climb to viscous glide in creep of solid solution alloys | 1.2 | 462 | Citations (PDF) |
| 964 | Low-temperature deformation and dislocation mobility in pure and Mg-doped LiF crystals | 1.9 | 36 | Citations (PDF) |
| 965 | The significance of grain boundaries in high-temperature creep | 2.2 | 10 | Citations (PDF) |
| 966 | The significance of grain boundaries in high-temperature creep | 2.2 | 4 | Citations (PDF) |
| 967 | The planar distribution of grain size in a polycrystalline ceramic | 0.3 | 10 | Citations (PDF) |
| 968 | The portevin-le chatelier effect in Cu3Au | 1.2 | 0 | Citations (PDF) |
| 969 | The strain dependence of vacancy creation and dislocation density during serrated yielding | 1.2 | 7 | Citations (PDF) |
| 970 | Activation Energies for Creep of Pyrolytic and Glassy Carbon | 0.9 | 6 | Citations (PDF) |
| 971 | Grain-Boundary Sliding in Ceramics | 3.7 | 12 | Citations (PDF) |
| 972 | Dependence of Creep Rate on Porosity | 3.7 | 39 | Citations (PDF) |
| 973 | The effect of surface configuration on grain boundary sliding | 2.4 | 106 | Citations (PDF) |
| 974 | Effect of Microstructure on Deformation of Polycrystalline MgO | 3.7 | 28 | Citations (PDF) |
| 975 | The significance of grain boundary dislocations in mechanical behavior | 0.2 | 8 | Citations (PDF) |
| 976 | Creep mechanisms in stoichiometric uranium dioxide | 2.9 | 17 | Citations (PDF) |
| 977 | An estimate of the time to fracture due to triple point cracking | 1.9 | 13 | Citations (PDF) |
| 978 | The mechanism of creep in polycrystalline magnesium oxide | 2.3 | 64 | Citations (PDF) |
| 979 | On the nature of superplastic deformation in the MgAl eutectic | 1.2 | 3 | Citations (PDF) |
| 980 | Grain boundary displacements due to diffusional creep | 1.2 | 34 | Citations (PDF) |
| 981 | The variation in secondary creep rate at large grain sizes | 1.2 | 19 | Citations (PDF) |
| 982 | Grain boundary sliding as a deformation mechanism during creep | 1.9 | 312 | Citations (PDF) |
| 983 | Determination of the Cleavage Velocity in Tungsten using Ultrasonic Fractography | 38.0 | 5 | Citations (PDF) |
| 984 | An electron microscope examination of deformed polycrystalline magnesium oxide | 3.4 | 5 | Citations (PDF) |
| 985 | The distribution of grain diameters in polycrystalline magnesium oxide | 0.3 | 47 | Citations (PDF) |
| 986 | The shape of grains in a polycrystal | 0.3 | 62 | Citations (PDF) |
| 987 | The dependence of grain-boundary sliding on shear stress | 3.4 | 46 | Citations (PDF) |
| 988 | Comment on void formation in nickel and silver during creep | 1.2 | 4 | Citations (PDF) |
| 989 | Creep of polycrystalline lithium fluoride | 1.9 | 49 | Citations (PDF) |
| 990 | Low temperature dislocation mechanisms in ordered and disordered Cu3Au | 1.9 | 18 | Citations (PDF) |
| 991 | Thinning of Polycrystalline MgO for Transmission Electron Microscopy | 1.5 | 4 | Citations (PDF) |
| 992 | An investigation of grain-boundary sliding during creep | 3.4 | 135 | Citations (PDF) |
| 993 | A method of printing grids on to metal surfaces for deformation studies | 0.4 | 6 | Citations (PDF) |
| 994 | Title is missing! 0 | | 0 | Citations (PDF) |
| 995 | Recent Developments in the Use of High Pressures for the Production of Nanostructured Materials | 2.9 | 3 | Citations (PDF) |
| 996 | Effect of V Content on the Microstructure and Mechanical Properties of High‐Pressure Torsion Nanostructured CoCrFeMnNiVx High‐Entropy Alloys | 2.9 | 1 | Citations (PDF) |
| 997 | Review: developments in the creep of materials over a period of more than a century | 3.4 | 6 | Citations (PDF) |
| 998 | A review of the role of grain boundary sliding in creep deformation | 1.0 | 1 | Citations (PDF) |
| 999 | Characterization of Cu-5Fe (wt.%) fabricated by powder consolidation using high-pressure torsion | 3.4 | 0 | Citations (PDF) |
| 1000 | Stabilizing nanocrystals via interface co-segregation and clustering | 8.7 | 0 | Citations (PDF) |
| 1001 | Retained-austenite transformation precedes grain fragmentation in carbon-partitioned QP1180 steel | 5.4 | 1 | Citations (PDF) |
| 1002 | High-pressure torsion of face-centered cubic multi-principal element alloys: Nanostructuring and its influence on properties | 35.7 | 4 | Citations (PDF) |
| 1003 | Fabrication of immiscible Cu-V alloy by high-pressure torsion 0, 1, | | 1 | Citations (PDF) |
| 1004 | Thermal Stability of an Al‐6061 Alloy Processed by High‐Pressure Torsion | 2.9 | 0 | Citations (PDF) |
| 1005 | A machine learning method to predict grain refinement and hardness of severely deformed materials | 6.3 | 0 | Citations (PDF) |
| 1006 | The Micromechanical Properties of CoCrFeNiMnV<sub>x</sub> (х = 0-2) High-Entropy Alloys | 0.0 | 0 | Citations (PDF) |
| 1007 | Microstructural refinement and intermetallic formation in an Al 5Cu alloy consolidated by high-pressure torsion | 2.5 | 0 | Citations (PDF) |
| 1008 | Kinetic control of deformation-induced martensitic transformation as a toughening mechanism in advanced metastable austenitic alloys | 6.9 | 0 | Citations (PDF) |
