| 1 | Analytical modelling of scanning strategy effect on temperature field and melt track dimensions in laser powder bed fusion | 3.4 | 8 | Citations (PDF) |
| 2 | Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components | 35.9 | 190 | Citations (PDF) |
| 3 | Crack free metal printing using physics informed machine learning | 8.7 | 55 | Citations (PDF) |
| 4 | Solidification cracking of a nickel alloy during high-power keyhole mode laser welding | 6.8 | 25 | Citations (PDF) |
| 5 | High-throughput screening of surface roughness during additive manufacturing | 6.3 | 34 | Citations (PDF) |
| 6 | Superior printed parts using history and augmented machine learning | 10.7 | 39 | Citations (PDF) |
| 7 | Mechanistic models for additive manufacturing of metallic components | 35.9 | 410 | Citations (PDF) |
| 8 | Deposit geometry and oxygen concentration spatial variations due to composition change in printed functionally graded components | 5.6 | 6 | Citations (PDF) |
| 9 | An improved heat transfer and fluid flow model of wire-arc additive manufacturing | 5.6 | 60 | Citations (PDF) |
| 10 | Spatial and temporal variation of hardness of a printed steel part | 8.7 | 31 | Citations (PDF) |
| 11 | The case for digital twins in metal additive manufacturing | 3.7 | 58 | Citations (PDF) |
| 12 | Physics-informed machine learning and mechanistic modeling of additive manufacturing to reduce defects | 3.9 | 74 | Citations (PDF) |
| 13 | Analytical estimation of fusion zone dimensions and cooling rates in part scale laser powder bed fusion | 3.4 | 21 | Citations (PDF) |
| 14 | Towards developing multiscale-multiphysics models and their surrogates for digital twins of metal additive manufacturing | 3.4 | 62 | Citations (PDF) |
| 15 | Residual stresses in wire-arc additive manufacturing – Hierarchy of influential variables | 3.4 | 73 | Citations (PDF) |
| 16 | Machine learning based hierarchy of causative variables for tool failure in friction stir welding | 8.7 | 55 | Citations (PDF) |
| 17 | Metallurgy, mechanistic models and machine learning in metal printing | 78.1 | 406 | Citations (PDF) |
| 18 | Control of asymmetric track geometry in printed parts of stainless steels, nickel, titanium and aluminum alloys | 3.2 | 9 | Citations (PDF) |
| 19 | Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys | 6.0 | 112 | Citations (PDF) |
| 20 | Residual stresses and distortion in the patterned printing of titanium and nickel alloys | 3.4 | 61 | Citations (PDF) |
| 21 | Conditions for void formation in friction stir welding from machine learning | 10.7 | 77 | Citations (PDF) |
| 22 | Harnessing the scientific synergy of welding and additive manufacturing | 3.1 | 29 | Citations (PDF) |
| 23 | Printability of 316 stainless steel | 3.1 | 41 | Citations (PDF) |
| 24 | Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718 | 3.4 | 78 | Citations (PDF) |
| 25 | A digital twin for rapid qualification of 3D printed metallic components | 3.9 | 288 | Citations (PDF) |
| 26 | Experiments and simulations on solidification microstructure for Inconel 718 in powder bed fusion electron beam additive manufacturing | 3.4 | 72 | Citations (PDF) |
| 27 | Laser weld geometry and microstructure of cast Uranium-6 wt% niobium alloy | 2.9 | 7 | Citations (PDF) |
| 28 | Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion | 3.2 | 178 | Citations (PDF) |
| 29 | Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys | 3.2 | 230 | Citations (PDF) |
| 30 | Additive manufacturing of metallic components – Process, structure and properties | 35.9 | 7,329 | Citations (PDF) |
| 31 | Special features of double pulsed gas metal arc welding | 6.8 | 63 | Citations (PDF) |
| 32 | Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints | 3.2 | 114 | Citations (PDF) |
| 33 | Mitigation of lack of fusion defects in powder bed fusion additive manufacturing | 6.3 | 227 | Citations (PDF) |
| 34 | The Hardness of Additively Manufactured Alloys | 2.9 | 142 | Citations (PDF) |
| 35 | Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing | 5.6 | 225 | Citations (PDF) |
| 36 | Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy | 8.7 | 170 | Citations (PDF) |
| 37 | Dimensionless numbers in additive manufacturing | 2.1 | 159 | Citations (PDF) |
| 38 | Crystal growth during keyhole mode laser welding | 8.7 | 112 | Citations (PDF) |
| 39 | Building blocks for a digital twin of additive manufacturing | 8.7 | 359 | Citations (PDF) |
| 40 | A pathway to microstructural refinement through double pulsed gas metal arc welding | 5.4 | 60 | Citations (PDF) |
| 41 | Building digital twins of 3D printing machines | 5.4 | 219 | Citations (PDF) |
| 42 | An improved prediction of residual stresses and distortion in additive manufacturing | 3.2 | 712 | Citations (PDF) |
| 43 | Mitigation of thermal distortion during additive manufacturing | 5.4 | 195 | Citations (PDF) |
| 44 | Printability of alloys for additive manufacturing | 3.5 | 454 | Citations (PDF) |
| 45 | Origin of grain orientation during solidification of an aluminum alloy | 8.7 | 250 | Citations (PDF) |
| 46 | Towards a Map of Solidification Cracking Risk in Laser Welding of Austenitic Stainless Steels | 1.1 | 12 | Citations (PDF) |
| 47 | Evolution of solidification texture during additive manufacturing | 3.5 | 456 | Citations (PDF) |
| 48 | Employing microsecond pulses to form laser‐fired contacts in photovoltaic devices | 6.8 | 4 | Citations (PDF) |
| 49 | Asymmetry in steel welds with dissimilar amounts of sulfur | 5.4 | 22 | Citations (PDF) |
| 50 | Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process | 1.8 | 257 | Citations (PDF) |
| 51 | Cooling rates and peak temperatures during friction stir welding of a high-carbon steel | 5.4 | 53 | Citations (PDF) |
| 52 | Real time monitoring of laser beam welding keyhole depth by laser interferometry | 3.1 | 54 | Citations (PDF) |
| 53 | Weld bead center line shift during laser welding of austenitic stainless steels with different sulfur content | 5.4 | 19 | Citations (PDF) |
| 54 | Friction stir welding of mild steel: Tool durability and steel microstructure | 1.8 | 44 | Citations (PDF) |
| 55 | Toward an integrated computational system for describing the additive manufacturing process for metallic materials | 3.4 | 77 | Citations (PDF) |
| 56 | Material adhesion and stresses on friction stir welding tool pins | 3.1 | 46 | Citations (PDF) |
| 57 | Phenomenological Modeling of Fusion Welding Processes | 4.1 | 34 | Citations (PDF) |
| 58 | A Smart Bi-Directional Model of Heat Transfer and Free Surface Flow in Gas-Metal-Arc Fillet Welding for Practising Engineers | 2.3 | 4 | Citations (PDF) |
| 59 | Solidification Map of a Nickel-Base Alloy | 2.1 | 88 | Citations (PDF) |
| 60 | Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding | 3.1 | 54 | Citations (PDF) |
| 61 | Tool durability maps for friction stir welding of an aluminium alloy | 2.0 | 34 | Citations (PDF) |
| 62 | Diamond growth with locally supplied methane and acetylene | 2.5 | 4 | Citations (PDF) |
| 63 | Review: Friction stir welding tools | 3.1 | 715 | Citations (PDF) |
| 64 | Influence of oxygen on weld geometry in fibre laser and fibre laser–GMA hybrid welding | 3.1 | 25 | Citations (PDF) |
| 65 | Toward optimum friction stir welding tool shoulder diameter | 5.4 | 245 | Citations (PDF) |
| 66 | Synthesis of nanocomposite thin films with self-assembled structures by pulsed ion beam ablation of MoS2 target | 2.5 | 11 | Citations (PDF) |
| 67 | Tool Geometry for Friction Stir Welding—Optimum Shoulder Diameter | 2.1 | 111 | Citations (PDF) |
| 68 | Back-of-the-envelope calculations in friction stir welding – Velocities, peak temperature, torque, and hardness | 8.7 | 78 | Citations (PDF) |
| 69 | Scaling of spiking and humping in keyhole welding | 3.0 | 18 | Citations (PDF) |
| 70 | Role of surface-active elements during keyhole-mode laser welding | 3.0 | 26 | Citations (PDF) |
| 71 | Load bearing capacity of tool pin during friction stir welding | 2.7 | 106 | Citations (PDF) |
| 72 | Origin of stray grain formation in single-crystal superalloy weld pools from heat transfer and fluid flow modeling | 8.7 | 153 | Citations (PDF) |
| 73 | Friction stir welding of dissimilar alloys – a perspective | 3.1 | 262 | Citations (PDF) |
| 74 | Cooling rate in 800 to 500°C range from dimensional analysis | 3.1 | 17 | Citations (PDF) |
| 75 | A Genetic Algorithm-Assisted Inverse Convective Heat Transfer Model for Tailoring Weld Geometry | 4.7 | 30 | Citations (PDF) |
| 76 | Problems and issues in laser-arc hybrid welding | 17.7 | 212 | Citations (PDF) |
| 77 | Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments | 5.4 | 173 | Citations (PDF) |
| 78 | Unusual wavy weld pool boundary from dimensional analysis | 5.4 | 50 | Citations (PDF) |
| 79 | Strains and strain rates during friction stir welding | 5.4 | 190 | Citations (PDF) |
| 80 | The effects of Prandtl number on wavy weld boundary | 5.6 | 29 | Citations (PDF) |
| 81 | Heat transfer and fluid flow during electron beam welding of 21Cr–6Ni–9Mn steel and Ti–6Al–4V alloy | 3.0 | 122 | Citations (PDF) |
| 82 | Critical assessment: Friction stir welding of steels | 3.1 | 129 | Citations (PDF) |
| 83 | Stray Grain Formation in Welds of Single-Crystal Ni-Base Superalloy CMSX-4 | 2.1 | 63 | Citations (PDF) |
| 84 | Recent advances in friction-stir welding – Process, weldment structure and properties | 35.9 | 1,879 | Citations (PDF) |
| 85 | An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations | 8.7 | 78 | Citations (PDF) |
| 86 | Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy | 0.4 | 69 | Citations (PDF) |
| 87 | Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid welding | 3.1 | 101 | Citations (PDF) |
| 88 | Orientation Imaging Microscopy of Stray Grain Formation in Single Crystal Weld Structures | 0.4 | 0 | Citations (PDF) |
| 89 | Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium | 3.0 | 382 | Citations (PDF) |
| 90 | Three-dimensional heat and material flow during friction stir welding of mild steel | 8.7 | 579 | Citations (PDF) |
| 91 | Tailoring gas tungsten arc weld geometry using a genetic algorithm and a neural network trained with convective heat flow calculations | 6.3 | 28 | Citations (PDF) |
| 92 | Heat Transfer and Fluid Flow during Gas-Metal-Arc Fillet Welding for Various Joint Configurations and Welding Positions | 2.1 | 69 | Citations (PDF) |
| 93 | A Convective Heat-Transfer Model for Partial and Full Penetration Keyhole Mode Laser Welding of a Structural Steel | 2.1 | 110 | Citations (PDF) |
| 94 | Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel | 3.1 | 237 | Citations (PDF) |
| 95 | Non-isothermal grain growth in metals and alloys | 1.8 | 54 | Citations (PDF) |
| 96 | Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding | 2.1 | 327 | Citations (PDF) |
| 97 | Improving reliability of heat and fluid flow calculation during conduction mode laser spot welding by multivariable optimisation | 3.1 | 53 | Citations (PDF) |
| 98 | Neural network model of heat and fluid flow in gas metal arc fillet welding based on genetic algorithm and conjugate gradient optimisation | 3.1 | 15 | Citations (PDF) |
| 99 | Liquid metal expulsion during laser spot welding of 304 stainless steel | 3.0 | 51 | Citations (PDF) |
| 100 | Dimensionless correlation to estimate peak temperature during friction stir welding | 3.1 | 50 | Citations (PDF) |
| 101 | Tailoring weld geometry during keyhole mode laser welding using a genetic algorithm and a heat transfer model | 3.0 | 36 | Citations (PDF) |
| 102 | Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure | 8.7 | 48 | Citations (PDF) |
| 103 | Optimization of the johnson-mehl-avarami equation parameters for α-ferrite to γ-austenite transformation in steel welds using a genetic algorithm | 2.1 | 32 | Citations (PDF) |
| 104 | Tailoring complex weld geometry through reliable heat-transfer and fluid-flow calculations and a genetic algorithm | 2.1 | 14 | Citations (PDF) |
| 105 | Integrated modelling of thermal cycles, austenite formation, grain growth and decomposition in the heat affected zone of carbon steel | 3.1 | 33 | Citations (PDF) |
| 106 | Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds—part I: an engineering physics model | 3.0 | 14 | Citations (PDF) |
| 107 | A computational procedure for finding multiple solutions of convective heat transfer equations | 3.0 | 32 | Citations (PDF) |
| 108 | Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds—part II: application to welding of steel | 3.0 | 12 | Citations (PDF) |
| 109 | Grain topology in Ti–6Al–4V welds—Monte Carlo simulation and experiments | 3.0 | 23 | Citations (PDF) |
| 110 | Composition change of stainless steel during microjoining with short laser pulse | 2.1 | 51 | Citations (PDF) |
| 111 | Guaranteed fillet weld geometry from heat transfer model and multivariable optimization | 5.6 | 36 | Citations (PDF) |
| 112 | Probing unknown welding parameters from convective heat transfer calculation and multivariable optimization | 3.0 | 58 | Citations (PDF) |
| 113 | Nonisothermal growth and dissolution of inclusions in liquid steels | 2.4 | 24 | Citations (PDF) |
| 114 | Kinetic modeling of phase transformations occurring in the HAZ of C-Mn steel welds based on direct observations | 8.7 | 100 | Citations (PDF) |
| 115 | Heat transfer and fluid flow during laser spot welding of 304 stainless steel | 3.0 | 277 | Citations (PDF) |
| 116 | Alloying element vaporization during laser spot welding of stainless steel | 3.0 | 89 | Citations (PDF) |
| 117 | Computational Modeling:A Path to Expand the Knowledge Base in Fusion Welding | 0.2 | 2 | Citations (PDF) |
| 118 | Kinetics of ferrite to austenite transformation during welding of 1005 steel | 5.4 | 38 | Citations (PDF) |
| 119 | Modeling and real time mapping of phases during GTA welding of 1005 steel | 6.3 | 83 | Citations (PDF) |
| 120 | Pore formation during continuous wave Nd:YAG laser welding of aluminium for automotive applications | 1.1 | 34 | Citations (PDF) |
| 121 | Weld metal composition change during conduction mode laser welding of aluminum alloy 5182 | 2.4 | 186 | Citations (PDF) |
| 122 | Geometry of laser spot welds from dimensionless numbers | 2.4 | 61 | Citations (PDF) |
| 123 | Three-dimensional monte carlo simulation of grain growth in zone-refined iron | 2.4 | 22 | Citations (PDF) |
| 124 | Time-temperature-transformation diagrams for the growth and dissolution of inclusions in liquid steels | 5.4 | 26 | Citations (PDF) |
| 125 | Effects of time, temperature, and steel composition on growth and dissolution of inclusions in liquid steels | 1.5 | 17 | Citations (PDF) |
| 126 | Effects of time, temperature, and steel composition on growth and dissolution of inclusions in liquid steels | 1.5 | 10 | Citations (PDF) |
| 127 | Three dimensional Monte Carlo simulation of grain growth during GTA welding of titanium | 8.7 | 119 | Citations (PDF) |
| 128 | Numerical modeling of enhanced nitrogen dissolution during gas tungsten Arc welding | 2.4 | 31 | Citations (PDF) |
| 129 | Modeling of inclusion growth and dissolution in the weld pool | 2.4 | 42 | Citations (PDF) |
| 130 | Three-dimensional monte carlo simulation of grain growth in the heat-affected zone of a 2.25Cr-1Mo steel weld | 2.4 | 47 | Citations (PDF) |
| 131 | Continuous wave-Nd: yttrium–aluminum–garnet laser welding of AM60B magnesium alloy | 1.6 | 66 | Citations (PDF) |
| 132 | Formación de porosidad durante la soldadura láser de Nd: YAG de onda continua en aleaciones de aluminio para aplicaciones automotrices | 0.7 | 10 | Citations (PDF) |
| 133 | Modeling macro-and microstructures of Gas-Metal-Arc Welded HSLA-100 steel | 2.4 | 91 | Citations (PDF) |
| 134 | Current issues and problems in laser welding of automotive aluminium alloys | 17.7 | 311 | Citations (PDF) |
| 135 | Quantitative modelling of motion, temperature gyrations, and growth of inclusions in weld pool | 3.1 | 23 | Citations (PDF) |
| 136 | Enhanced dissolution of nitrogen during gas tungsten arc welding of steels | 3.1 | 25 | Citations (PDF) |
| 137 | Enhanced dissolution of nitrogen during gas tungsten arc welding of steels | 3.1 | 6 | Citations (PDF) |
| 138 | Quantitative modelling of motion, temperature gyrations, and growth of inclusions in weld pool | 3.1 | 4 | Citations (PDF) |
| 139 | Weld metal microstructure prediction from fundamentals of transport phenomena and phase transformation theory | 3.1 | 11 | Citations (PDF) |
| 140 | Absorption and transport of hydrogen during gas metal arc welding of low alloy steel | 3.1 | 34 | Citations (PDF) |
| 141 | Kinetics of directed oxidation of Al-Mg alloys into A12O3 preforms | 6.3 | 7 | Citations (PDF) |
| 142 | Weld metal microstructure prediction from fundamentals of transport phenomena and phase transformation theory | 3.1 | 2 | Citations (PDF) |
| 143 | Absorption and transport of hydrogen during gas metal arc welding of low alloy steel | 3.1 | 6 | Citations (PDF) |
| 144 | NUMERICAL PREDICTION OF FLUID FLOW AND HEAT TRANSFER IN WELDING WITH A MOVING HEAT SOURCE | 2.5 | 132 | Citations (PDF) |
| 145 | Interdiffusion in the MgO-Al2O3 spinel with or without some dopants | 2.1 | 42 | Citations (PDF) |
| 146 | Probing the initial stage of synthesis of Al2O3/Al composites by directed oxidation of Al-Mg alloys | 2.4 | 13 | Citations (PDF) |
| 147 | Kinetics of directed oxidation of Al-Mg alloys in the initial and final stages of synthesis of Al2O3/Al composites | 6.3 | 26 | Citations (PDF) |
| 148 | Growth stage kinetics in the synthesis of Al2O3/Al composites by directed oxidation of Al-Mg and Al-Mg-Si alloys | 6.2 | 15 | Citations (PDF) |
| 149 | Metal distribution in alumina/aluminium composites synthesized by directed metal oxidation | 3.5 | 3 | Citations (PDF) |
| 150 | Coarsening of oxide inclusions in low alloy steel welds | 3.1 | 27 | Citations (PDF) |
| 151 | Coarsening of oxide inclusions in low alloy steel welds | 3.1 | 1 | Citations (PDF) |
| 152 | A general model for partitioning of gases between a metal and its plasma environment | 2.4 | 33 | Citations (PDF) |
| 153 | Development of macro- and microstructures of carbon–manganese low alloy steel welds: inclusion formation | 1.8 | 117 | Citations (PDF) |
| 154 | Physical processes in fusion welding | 41.0 | 496 | Citations (PDF) |
| 155 | Electrical Conductivity of Alumina/Aluminum Composites Synthesized by Directed Metal Oxidation | 3.7 | 10 | Citations (PDF) |
| 156 | Oxide Matrix Composite by Directional Oxidation of a Commercial Aluminum-Magnesium Alloy | 3.7 | 24 | Citations (PDF) |
| 157 | Effect of Pressure on Plasma-Assisted Chemical Vapor. Deposition of Silicon Oxide(s) | 3.7 | 0 | Citations (PDF) |
| 158 | Optical emissions during plasma assisted chemical vapor deposition of diamond-like carbon films | 4.8 | 11 | Citations (PDF) |
| 159 | Transport phenomena in the scale-up of hot filament-assisted chemical vapor deposition of diamond | 5.7 | 5 | Citations (PDF) |
| 160 | Experimental studies on nitrogen solubility in Nd 2 Fe 14 B alloy in the temperature range 773–1143 K | 2.8 | 5 | Citations (PDF) |
| 161 | Calculation of weld metal composition change in high-power conduction mode carbon dioxide laser-welded stainless steels | 1.6 | 72 | Citations (PDF) |
| 162 | Optical emission investigation of the plasma enhanced chemical vapor deposition of silicon oxide films | 1.8 | 10 | Citations (PDF) |
| 163 | Current Issues and Problems in Welding Science | 36.4 | 253 | Citations (PDF) |
| 164 | Modeling of substrate surface temperature distribution during hot-filament assisted diamond deposition | 4.8 | 3 | Citations (PDF) |
| 165 | Nitrogen activity determination in plasmas | 1.6 | 27 | Citations (PDF) |
| 166 | Thermochemistry and diffusion of nitrogen in solid molybdenum | 1.6 | 2 | Citations (PDF) |
| 167 | Effect of temperature and composition on surface tension in Fe-Ni-Cr alloys containing sulfur | 1.6 | 109 | Citations (PDF) |
| 168 | Laser-Induced Calcite-Aragonite Transition | 3.7 | 9 | Citations (PDF) |
| 169 | Fuming of stannous oxide from silicate melts | 1.6 | 6 | Citations (PDF) |
| 170 | Modeling of interfacial phenomena in welding | 1.6 | 32 | Citations (PDF) |
| 171 | TEM characterization of structural changes in graphite plates due to pulsed CO2 laser irradiation | 1.0 | 3 | Citations (PDF) |
| 172 | Oxidation of diamond films synthesized by hot filament assisted chemical vapor deposition | 2.5 | 52 | Citations (PDF) |
| 173 | Heat transfer during Nd: Yag pulsed laser welding and its effect on solidification structure of austenitic stainless steels | 0.8 | 105 | Citations (PDF) |
| 174 | Emission spectroscopy of plasma during laser welding of AISI 201 stainless steel | 1.6 | 58 | Citations (PDF) |
| 175 | Diamond formation in air by the Fedoseev-Derjaguin laser process | 10.7 | 39 | Citations (PDF) |
| 176 | Separation of synthetic diamond from carbon black by oxidation | 10.7 | 4 | Citations (PDF) |
| 177 | Desulphurization of coal-derived char using mixtures of steam and methaneFuel, 1988, 67, 1542-1547 | 7.5 | 1 | Citations (PDF) |
| 178 | Free surface flow and heat transfer in conduction mode laser welding | 1.6 | 127 | Citations (PDF) |
| 179 | Effects of oxygen and sulfur on alloying element vaporization rates during laser welding | 1.6 | 43 | Citations (PDF) |
| 180 | Surface tension of binary metal—surface active solute systems under conditions relevant to welding metallurgy | 1.6 | 552 | Citations (PDF) |
| 181 | Nitrogen solubility in solid niobium | 1.6 | 6 | Citations (PDF) |
| 182 | Effect of low-pressure argon plasma on metal vaporization rates | 2.5 | 3 | Citations (PDF) |
| 183 | A comparative study of the roles of KCN and NaCN as catalytic precursors in the Boudouard reaction | 7.5 | 5 | Citations (PDF) |
| 184 | Reaction between CO2 and coke doped with NaCN | 10.7 | 13 | Citations (PDF) |
| 185 | Interfacial tension between low pressure argon plasma and molten copper and iron | 1.6 | 21 | Citations (PDF) |
| 186 | Mechanism of alloying element vaporization during laser welding | 1.6 | 120 | Citations (PDF) |
| 187 | Structural effects in the reaction between carbon dioxide and coke doped with various potassium bearing catalytic precursors | 1.6 | 6 | Citations (PDF) |
| 188 | Oxygen Pressure Dependence of Lead Ion Transport in PbO-SiO2 Melts | 3.7 | 4 | Citations (PDF) |
| 189 | Numerical calculation of fluid flow in a continuous casting tundish | 1.6 | 29 | Citations (PDF) |
| 190 | Electronic and ionic transport in liquid PbO-SiO2 systems | 1.6 | 16 | Citations (PDF) |
| 191 | Absorption of CO2 laser beam by AISI 4340 steel | 1.6 | 19 | Citations (PDF) |
| 192 | Alloying element vaporization and weld pool temperature during laser welding of AlSl 202 stainless steel | 1.6 | 74 | Citations (PDF) |
| 193 | The effects of CO and CO2 on the rate of Na2CO3 catalyzed boudouard reaction | 1.6 | 17 | Citations (PDF) |
| 194 | Electrical Conductivity of PbO-SiO<sub>2</sub>Liquids Containing Pb Precipitates | 2.2 | 1 | Citations (PDF) |
| 195 | Temperature profiles, the size of the heat-affected zone and dilution in electroslag welding | 0.2 | 12 | Citations (PDF) |
| 196 | Heat generation patterns and temperature profiles in electroslag welding | 1.6 | 9 | Citations (PDF) |
