| 1 | Ethanol‐Induced Reversible Phase Transition in Antimony Halides for Morse Code Anti‐Counterfeiting and Optical Logic Gates | 9.2 | 19 | Citations (PDF) |
| 2 | High‐Efficiency Perovskite Solar Cells Enabled by Guanylation Reaction for Removing MACl Residual and In‐Situ Forming 2D Perovskite | 1.4 | 2 | Citations (PDF) |
| 3 | Efficient and stable inverted MA/Br-free 2D/3D perovskite solar cells enabled by α-to-δ phase transition inhibition and crystallization modulation | 30.8 | 65 | Citations (PDF) |
| 4 | Molecule design enabled high efficiency flexible zirconium-based lead-free perovskite scintillator | 3.0 | 7 | Citations (PDF) |
| 5 | Excitation‐Wavelength‐Induced Dual‐Band Fluorescence of Copper Halides for Multi‐Mode Encryption and Anti‐Counterfeiting Applications | 7.0 | 17 | Citations (PDF) |
| 6 | Inverse-Design-Assisted On-Chip GRIN Meta-Lens for Dual-Polarization Multimode Waveguide Crossing | 6.0 | 10 | Citations (PDF) |
| 7 | Van der Waals Sandwich Structures for Surface-Enhanced Raman Scattering | 3.1 | 2 | Citations (PDF) |
| 8 | The influence on optoelectronic characteristics of MOS capacitor solid-state incandescent with AZO, GZO and ITO top electrodes | 4.5 | 1 | Citations (PDF) |
| 9 | Molecular polymerization strategy for stable perovskite solar cells with low lead leakage | 10.9 | 45 | Citations (PDF) |
| 10 | Inverse-Designed Multidimensional-Division-Multiplexing Photonic Circuits for Dense Integration | 6.0 | 7 | Citations (PDF) |
| 11 | Amidino-based ligand enables oriented crystallization and boosted carrier extraction for inverted perovskite solar cells and modules | 25.7 | 22 | Citations (PDF) |
| 12 | Lattice thermal conductivity of CsSnBr3/Cs2SnBr6 interface from ab initio based neuroevolution potential simulations | 2.8 | 2 | Citations (PDF) |
| 13 | Ultra-Broadband and Multi-Channel Polarization- Insensitive Multimode Waveguide Crossings | 3.5 | 4 | Citations (PDF) |
| 14 | Double amidino-mediated multiple hydrogen-bonded Dion–Jacobson perovskites enable oriented crystallization for efficient inverted FAPbI
3
solar cells and modules (642 cm
2
) | 30.8 | 13 | Citations (PDF) |
| 15 | Functional‐Group‐Induced Single Quantum Well Dion–Jacobson 2D Perovskite for Efficient and Stable Inverted Perovskite Solar Cells | 24.5 | 53 | Citations (PDF) |
| 16 | White emission metal halides for flexible and transparent x-ray scintillators | 10.4 | 67 | Citations (PDF) |
| 17 | Development of Quasi-Two-Dimensional Perovskites and Their Application in Light-Emitting Diodes | 4.6 | 16 | Citations (PDF) |
| 18 | Luminescence regulation of Sb<sup>3+</sup> in 0D hybrid metal halides by hydrogen bond network for optical anti-counterfeiting | 19.0 | 34 | Citations (PDF) |
| 19 | Beyond the Charge Transfer Mechanism for 2D Materials-Assisted Surface Enhanced Raman Scattering | 6.5 | 5 | Citations (PDF) |
| 20 | Silver coordination-induced n-doping of PCBM for stable and efficient inverted perovskite solar cells | 13.7 | 126 | Citations (PDF) |
| 21 | Ultraviolet detection and imaging of one-dimensional cesium copper iodine single crystals synthesized by gradient crystallization | 3.0 | 6 | Citations (PDF) |
| 22 | Luminescence Improvement of Hybrid Zinc‐Based Halides via Sb3+‐Doping for Flexible X‐Ray Imaging | 9.2 | 27 | Citations (PDF) |
| 23 | Polaron and Exciton in a Lead-Free Vacancy-Ordered Cs2SnBr6 Double Perovskite | 3.1 | 7 | Citations (PDF) |
| 24 | Effects of La Doping on Persistent Photoconductivity of Solution-Processed InZnO Thin-Film Transistors | 2.7 | 2 | Citations (PDF) |
| 25 | Efficient and stable inverted perovskite solar cells enabled by homogenized PCBM with enhanced electron transport | 13.7 | 108 | Citations (PDF) |
| 26 | Effect of the A-Site Cation on the Lattice Thermal Conductivity of Nitride Perovskites | 3.1 | 3 | Citations (PDF) |
| 27 | Stable yellow light emission from lead-free copper halides single crystals for visible light communication | 14.3 | 29 | Citations (PDF) |
| 28 | High quantum yield of In‐based halide perovskites for white light emission and flexible x‐ray scintillators | 11.6 | 55 | Citations (PDF) |
| 29 | Highly efficient copper-based halide single crystals with violet emission for visible light communication | 3.4 | 16 | Citations (PDF) |
| 30 | Near-unity quantum yield in zero-dimensional lead-free manganese-based halides for flexible X-ray imaging with high spatial resolution | 32.1 | 105 | Citations (PDF) |
| 31 | Anchoring palladium nanoparticles on CsPbBr3 perovskite nanocrystals for enhanced photocatalytic CO2 reduction | 6.7 | 15 | Citations (PDF) |
| 32 | Functional Layers of Inverted Flexible Perovskite Solar Cells and Effective Technologies for Device Commercialization | 11.0 | 118 | Citations (PDF) |
| 33 | 1-Adamantanamine Hydrochloride Resists Environmental Corrosion to Obtain Highly Efficient and Stable Perovskite Solar Cells | 4.2 | 9 | Citations (PDF) |
| 34 | Application of Natural Molecules in Efficient and Stable Perovskite Solar Cells | 2.8 | 12 | Citations (PDF) |
| 35 | Heterojunction Channel Engineering in Performance Enhancement of Solution-Processed Oxide Thin-Film Transistors | 2.7 | 13 | Citations (PDF) |
| 36 | Suppressing Phase Segregation in CsPbIBr2 Films via Anchoring Halide Ions toward Underwater Solar Cells | 8.7 | 60 | Citations (PDF) |
| 37 | High-performance lead-free quaternary antiperovskite photovoltaic candidate Ca6N2AsSb | 2.7 | 4 | Citations (PDF) |
| 38 | Solvent-Free Grinding Synthesis of Hybrid Copper Halides for White Light Emission | 4.6 | 29 | Citations (PDF) |
| 39 | Low-Temperature Solution Synthesis of Stable Cs3Cu2Br5 Single Crystals for Visible Light Communications | 8.0 | 27 | Citations (PDF) |
| 40 | Mn2+‐Based Luminescent Metal Halides: Syntheses, Properties, and Applications | 7.0 | 139 | Citations (PDF) |
| 41 | 2D/3D heterojunction engineering at the buried interface towards high-performance inverted methylammonium-free perovskite solar cells | 50.6 | 377 | Citations (PDF) |
| 42 | Strain Engineering Toward High‐Performance Formamidinium‐Based Perovskite Solar Cells | 4.6 | 59 | Citations (PDF) |
| 43 | Unraveling the dynamic behaviors of BF4-based ionic liquids at the SnO2/FAPbI3 interface using ab initio molecular dynamics simulations | 2.7 | 1 | Citations (PDF) |
| 44 | Low-voltage, solution-processed InZnO thin-film transistors with enhanced performance achieved by bilayer gate dielectrics | 3.0 | 13 | Citations (PDF) |
| 45 | Additive Conformational Engineering To Improve the PbI2 Framework for Efficient and Stable Perovskite Solar Cells | 4.6 | 7 | Citations (PDF) |
| 46 | Mixed‐Halide Inorganic Perovskite Solar Cells: Opportunities and Challenges | 7.0 | 103 | Citations (PDF) |
| 47 | Variable halide perovskites: diversification of anti-counterfeiting applications | 6.1 | 47 | Citations (PDF) |
| 48 | Crystallization manipulation and holistic defect passivation toward stable and efficient inverted perovskite solar cells | 30.8 | 175 | Citations (PDF) |
| 49 | Multidentate Chelation Achieves Bilateral Passivation toward Efficient and Stable Perovskite Solar Cells with Minimized Energy Losses | 8.7 | 45 | Citations (PDF) |
| 50 | Water-Molecule-Induced Reversible Fluorescence in a One-Dimensional Mn-Based Hybrid Halide for Anticounterfeiting and Digital Encryption–Decryption | 8.7 | 67 | Citations (PDF) |
| 51 | One-Dimensional CsCu2I3 Single-Crystal X-ray Detectors | 17.0 | 102 | Citations (PDF) |
| 52 | Solvent‐Free Synthesis of Inorganic Rubidium Copper Halides for Efficient Wireless Light Communication and X‐Ray Imaging | 17.0 | 108 | Citations (PDF) |
| 53 | Broadband Near-Infrared Emission from 0D Hybrid Copper Halides | 4.6 | 20 | Citations (PDF) |
| 54 | Passivating buried interface via self-assembled novel sulfonium salt toward stable and efficient perovskite solar cells | 12.0 | 134 | Citations (PDF) |
| 55 | Pressure‐assisted cooling to grow ultra‐stable Cs3Cu2l5 and CsCu2l3 single crystals for solid‐state lighting and visible light communication | 11.6 | 53 | Citations (PDF) |
| 56 | Improving Humidity Sensing of Black Phosphorus Nanosheets by Co-Doping Benzyl Viologen and Au Nanoparticles | 3.1 | 18 | Citations (PDF) |
| 57 | Highly efficient emission and high-CRI warm white light-emitting diodes from ligand-modified CsPbBr<sub>3</sub> quantum dots | 19.0 | 144 | Citations (PDF) |
| 58 | Inorganic halide perovskites for lighting and visible light communication | 6.4 | 42 | Citations (PDF) |
| 59 | Excited-state regulation in eco-friendly ZnSeTe-based quantum dots by cooling engineering | 6.7 | 11 | Citations (PDF) |
| 60 | Ion diffusion-induced double layer doping toward stable and efficient perovskite solar cells | 8.6 | 62 | Citations (PDF) |
| 61 | Performance enhancement of solution-processed InZnO thin-film transistors by Al doping and surface passivation | 3.7 | 23 | Citations (PDF) |
| 62 | Enhanced p-Type Conductivity of NiOx Films with Divalent Cd Ion Doping for Efficient Inverted Perovskite Solar Cells | 8.0 | 35 | Citations (PDF) |
| 63 | Template Assembled Large‐Size CsPbBr3 Nanocomposite Films toward Flexible, Stable, and High‐Performance X‐Ray Scintillators | 9.2 | 132 | Citations (PDF) |
| 64 | Temperature modulated p-n transition NO2 sensor in metal-organic framework-derived CuO | 7.6 | 36 | Citations (PDF) |
| 65 | Self‐Formed Multifunctional Grain Boundary Passivation Layer Achieving 22.4% Efficient and Stable Perovskite Solar Cells | 4.6 | 15 | Citations (PDF) |
| 66 | Interfacial defect passivation by novel phosphonium salts yields 22% efficiency perovskite solar cells: Experimental and theoretical evidence | 11.6 | 49 | Citations (PDF) |
| 67 | Simultaneous Passivation of Bulk and Interface Defects with Gradient 2D/3D Heterojunction Engineering for Efficient and Stable Perovskite Solar Cells | 8.0 | 36 | Citations (PDF) |
| 68 | Opportunities and challenges of low-dimensional hybrid metal halides in white light-emitting diodes | 2.9 | 26 | Citations (PDF) |
| 69 | Ion migration suppression mechanism via 4-sulfobenzoic acid monopotassium salt for 22.7% stable perovskite solar cells | 6.7 | 35 | Citations (PDF) |
| 70 | Stabilizing Perovskite Precursor by Synergy of Functional Groups for NiOx‐Based Inverted Solar Cells with 23.5 % Efficiency | 14.4 | 163 | Citations (PDF) |
| 71 | Stabilizing Perovskite Precursor by Synergy of Functional Groups for NiOx‐Based Inverted Solar Cells with 23.5 % Efficiency | 1.4 | 18 | Citations (PDF) |
| 72 | Revealing Steric‐Hindrance‐Dependent Buried Interface Defect Passivation Mechanism in Efficient and Stable Perovskite Solar Cells with Mitigated Tensile Stress | 17.0 | 193 | Citations (PDF) |
| 73 | Double‐Side Interface Engineering Synergistically Boosts the Efficiency of Inorganic CsPbIBr2 Perovskite Solar Cells Over 12% | 7.0 | 30 | Citations (PDF) |
| 74 | Highly Efficient and Ultra‐Broadband Yellow Emission of Lead‐Free Antimony Halide toward White Light‐Emitting Diodes and Visible Light Communication | 9.2 | 75 | Citations (PDF) |
| 75 | Significant performance enhancement of UV-Vis self-powered CsPbBr3 quantum dot-based photodetectors induced by ligand modification and P3HT embedding | 3.0 | 12 | Citations (PDF) |
| 76 | Photoelectron‐Extractive and Ambient‐Stable CsPbBr3@SnO2 Nanocrystals for High‐Performance Photodetection | 9.2 | 33 | Citations (PDF) |
| 77 | Tailoring multifunctional anion modifiers to modulate interfacial chemical interactions for efficient and stable perovskite solar cells | 16.2 | 134 | Citations (PDF) |
| 78 | Copper-based metal oxides for chemiresistive gas sensors | 5.1 | 43 | Citations (PDF) |
| 79 | Atomic periodic engineering enabled ultrathin high-efficiency AgBiS2 solar cells | 3.4 | 11 | Citations (PDF) |
| 80 | High Quantum Efficiency of Stable Sb‐Based Perovskite‐Like Halides toward White Light Emission and Flexible X‐Ray Imaging | 7.0 | 79 | Citations (PDF) |
| 81 | The suppressing of excitonic effects in Cu-chalcogenides for solar cell applications | 6.3 | 11 | Citations (PDF) |
| 82 | Flexible and stable copper-based halide scintillator for high-performance X-ray imaging | 3.4 | 30 | Citations (PDF) |
| 83 | High-performance CsPbBr3@Cs4PbBr6/SiO2 nanocrystals via double coating layers for white light emission and visible light communication | 32.1 | 123 | Citations (PDF) |
| 84 | Flexible perovskite scintillators and detectors for X-ray detection | 3.5 | 76 | Citations (PDF) |
| 85 | Enhanced amplified spontaneous emission of CsPbBr3 quantum dots via gold nanorods-induced localized surface plasmon resonance | 3.0 | 12 | Citations (PDF) |
| 86 | Stabilizing Buried Interface via Synergistic Effect of Fluorine and Sulfonyl Functional Groups Toward Efficient and Stable Perovskite Solar Cells | 30.1 | 141 | Citations (PDF) |
| 87 | Significant performance and stability improvement of low-voltage InZnO thin-film transistors by slight La doping | 3.0 | 38 | Citations (PDF) |
| 88 | Sodium Benzenesulfonate Modified Poly (3,4‐Ethylenedioxythiophene):Polystyrene Sulfonate with Improved Wettability and Work Function for Efficient and Stable Perovskite Solar Cells | 4.6 | 58 | Citations (PDF) |
| 89 | Room temperature synthesis of Sn2+doped highly luminescent CsPbBr3quantum dots for high CRI white light-emitting diodes | 5.0 | 55 | Citations (PDF) |
| 90 | All‐Inorganic Lead‐Free Perovskite(‐Like) Single Crystals: Synthesis, Properties, and Applications | 9.0 | 101 | Citations (PDF) |
| 91 | Self-assembled monolayers enhance the performance of oxide thin-film transistors | 3.7 | 8 | Citations (PDF) |
| 92 | One-Volt, Solution-Processed InZnO Thin-Film Transistors | 3.4 | 60 | Citations (PDF) |
| 93 | Efficiently Luminescent and Stable Lead‐free Cs3Cu2Cl5@Silica Nanocrystals for White Light‐Emitting Diodes and Communication | 7.0 | 107 | Citations (PDF) |
| 94 | Dual Resistance and Impedance Investigation: Ultrasensitive and Stable Humidity Detection of Molybdenum Disulfide Nanosheet-Polyethylene Oxide Hybrids | 8.0 | 71 | Citations (PDF) |
| 95 | Black Phosphorus-Titanium Dioxide Composites for Trace Nitrogen Dioxide Sensing at Room Temperature | 0.0 | 0 | Citations (PDF) |
| 96 | Opportunities and challenges of inorganic perovskites in high-performance photodetectors | 2.9 | 58 | Citations (PDF) |
| 97 | Crystal Orientation Modulation and Defect Passivation for Efficient and Stable Methylammonium-Free Dion-Jacobson Quasi-2D Perovskite Solar Cells | 8.0 | 35 | Citations (PDF) |
| 98 | Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells | 17.0 | 266 | Citations (PDF) |
| 99 | Simultaneous passivation of bulk and interface defects through synergistic effect of anion and cation toward efficient and stable planar perovskite solar cells | 14.2 | 141 | Citations (PDF) |
| 100 | Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature | 12.5 | 129 | Citations (PDF) |
| 101 | Interfacial defect passivation and stress release by multifunctional KPF6 modification for planar perovskite solar cells with enhanced efficiency and stability | 12.0 | 235 | Citations (PDF) |
| 102 | Ionic liquids in perovskite solar cells | 3.7 | 8 | Citations (PDF) |
| 103 | Room Temperature Synthesis of Stable Zirconia‐Coated CsPbBr3 Nanocrystals for White Light‐Emitting Diodes and Visible Light Communication | 9.2 | 211 | Citations (PDF) |
| 104 | Interfacial gradient energy band alignment modulation via ion exchange reaction toward efficient and stable methylammonium-free Dion-Jacobson quasi-2D perovskite solar cells | 7.9 | 24 | Citations (PDF) |
| 105 | Highly stable CsPbBr3 quantum dots by silica-coating and ligand modification for white light-emitting diodes and visible light communication | 12.0 | 146 | Citations (PDF) |
| 106 | Intrinsic white-light emission from low-dimensional perovskites for white-light-emitting diodes with high-color-rendering index | 4.9 | 28 | Citations (PDF) |
| 107 | Interface modification by ethanolamine interfacial layer for efficient planar structure perovskite solar cells | 7.9 | 25 | Citations (PDF) |
| 108 | Conductometric room temperature ammonia sensors based on titanium dioxide nanoparticles decorated thin black phosphorus nanosheets | 7.6 | 117 | Citations (PDF) |
| 109 | Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes | 6.4 | 57 | Citations (PDF) |
| 110 | Multifunctional organic ammonium salt-modified SnO2nanoparticles toward efficient and stable planar perovskite solar cells | 9.3 | 230 | Citations (PDF) |
| 111 | Low-operating temperature ammonia sensor based on Cu2O nanoparticles decorated with p-type MoS2nanosheets | 5.1 | 113 | Citations (PDF) |
| 112 | Highly efficient emission and high-CRI warm white light-emitting diodes from ligand-modified CsPbBr<sub>3</sub> quantum dots | 19.0 | 10 | Citations (PDF) |
| 113 | MXene Ti3C2Tx-Derived Nitrogen-Functionalized Heterophase TiO2 Homojunctions for Room-Temperature Trace Ammonia Gas Sensing | 8.0 | 152 | Citations (PDF) |
| 114 | Deciphering Ultrafast Carrier Dynamics of Eco-Friendly ZnSeTe-Based Quantum Dots: Toward High-Quality Blue–Green Emitters | 4.2 | 33 | Citations (PDF) |
| 115 | NH4Cl‐Modified ZnO for High‐Performance CsPbIBr2 Perovskite Solar Cells via Low‐Temperature Process | 4.6 | 224 | Citations (PDF) |
| 116 | Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for High-CRI white light-emitting diodes | 16.2 | 259 | Citations (PDF) |
| 117 | The Role of Mineral Acid Doping of PEDOT:PSS and Its Application in Organic Photovoltaics | 4.9 | 96 | Citations (PDF) |
| 118 | Optoelectronic Modulation of Undoped NiOx Films for Inverted Perovskite Solar Cells via Intrinsic Defect Regulation | 5.4 | 28 | Citations (PDF) |
| 119 | Methylammonium chloride as an interface modificator for planar-structure perovskite solar cells with a high open circuit voltage of 1.19V | 7.9 | 54 | Citations (PDF) |
| 120 | High-Efficiency and Stable Inverted Planar Perovskite Solar Cells with Pulsed Laser Deposited Cu-Doped NiOx Hole-Transport Layers | 8.0 | 59 | Citations (PDF) |
| 121 | Small Molecule Modulator at the Interface for Efficient Perovskite Solar Cells with High Short‐Circuit Current Density and Hysteresis Free | 4.9 | 71 | Citations (PDF) |
| 122 | Interface Modulator of Ultrathin Magnesium Oxide for Low‐Temperature‐Processed Inorganic CsPbIBr2 Perovskite Solar Cells with Efficiency Over 11% | 4.6 | 114 | Citations (PDF) |
| 123 | Challenges and strategies relating to device function layers and their integration toward high-performance inorganic perovskite solar cells | 5.0 | 150 | Citations (PDF) |
| 124 | High-Performance Photodetectors With X-Ray Responsivity Based on Interface Modified Perovskite Film | 3.4 | 15 | Citations (PDF) |
| 125 | Interfacial defects passivation using fullerene-polymer mixing layer for planar-structure perovskite solar cells with negligible hysteresis | 6.3 | 119 | Citations (PDF) |
| 126 | Stable and low-threshold whispering-gallery-mode lasing from modified CsPbBr3 perovskite quantum dots@SiO2 sphere | 12.0 | 82 | Citations (PDF) |
| 127 | Critical role of interface contact modulation in realizing low-temperature fabrication of efficient and stable CsPbIBr2 perovskite solar cells | 12.0 | 116 | Citations (PDF) |
| 128 | High performance CsPbBr3 quantum dots photodetectors by using zinc oxide nanorods arrays as an electron-transport layer | 3.0 | 147 | Citations (PDF) |
| 129 | Room-temperature doping of ytterbium into efficient near-infrared emission CsPbBr1.5Cl1.5 perovskite quantum dots | 3.4 | 80 | Citations (PDF) |
| 130 | Ultrapure and highly efficient green light emitting devices based on ligand-modified CsPbBr3 quantum dots | 6.4 | 70 | Citations (PDF) |
| 131 | Room temperature synthesis of stable silica-coated CsPbBr3 quantum dots for amplified spontaneous emission | 6.4 | 77 | Citations (PDF) |
| 132 | Stable Dynamics Performance and High Efficiency of ABX3‐Type Super‐Alkali Perovskites First Obtained by Introducing H5O2 Cation | 22.5 | 131 | Citations (PDF) |
| 133 | Eco-friendly and high-performance photoelectrochemical anode based on AgInS2 quantum dots embedded in 3D graphene nanowalls | 5.1 | 55 | Citations (PDF) |
| 134 | Tunable electronic structures and high efficiency obtained by introducing superalkali and superhalogen into AMX3-type perovskites | 7.9 | 46 | Citations (PDF) |
| 135 | Ultrastable CsPbBr3 Perovskite Quantum Dot and Their Enhanced Amplified Spontaneous Emission by Surface Ligand Modification | 11.5 | 299 | Citations (PDF) |
| 136 | Inhibition of In‐Plane Charge Transport in Hole Transfer Layer to Achieve High Fill Factor for Inverted Planar Perovskite Solar Cells | 4.6 | 29 | Citations (PDF) |
| 137 | Ultrathin, Core–Shell Structured SiO2 Coated Mn2+‐Doped Perovskite Quantum Dots for Bright White Light‐Emitting Diodes | 11.5 | 131 | Citations (PDF) |
| 138 | Human hair keratin for physically transient resistive switching memory devices | 5.1 | 79 | Citations (PDF) |
| 139 | Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis | 9.3 | 329 | Citations (PDF) |
| 140 | Enhanced single-mode lasers of all-inorganic perovskite nanocube by localized surface plasmonic effect from Au nanoparticles | 3.5 | 34 | Citations (PDF) |
| 141 | Highly efficient semitransparent CsPbIBr2 perovskite solar cells via low-temperature processed In2S3 as electron-transport-layer | 16.2 | 248 | Citations (PDF) |
| 142 | Two-dimensional lead-free hybrid halide perovskite using superatom anions with tunable electronic properties | 6.1 | 97 | Citations (PDF) |
| 143 | Tunable dual emission in Mn
2+
-doped CsPbX
3
(X = Cl, Br) quantum dots for high efficiency white light-emitting diodes | 2.6 | 17 | Citations (PDF) |
| 144 | Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application: notice of redundant publication | 3.0 | 2 | Citations (PDF) |
| 145 | Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application: publisher’s note | 3.0 | 0 | Citations (PDF) |
| 146 | I-III-VI chalcogenide semiconductor nanocrystals: Synthesis, properties, and applications | 16.4 | 47 | Citations (PDF) |
| 147 | Eliminating J-V hysteresis in perovskite solar cells via defect controlling | 2.5 | 36 | Citations (PDF) |
| 148 | Efficiency enhancement of ZnO/Cu2O solar cells with well oriented and micrometer grain sized Cu2O films | 3.0 | 357 | Citations (PDF) |
| 149 | Enhanced Two‐Photon‐Pumped Emission from In Situ Synthesized Nonblinking CsPbBr3/SiO2 Nanocrystals with Excellent Stability | 7.0 | 144 | Citations (PDF) |
| 150 | Transient Resistive Switching Memory of CsPbBr3 Thin Films | 4.9 | 76 | Citations (PDF) |
| 151 | Theoretical and experimental investigation of highly photocatalytic performance of CuInZnS nanoporous structure for removing the NO gas | 6.5 | 219 | Citations (PDF) |
| 152 | Highly Stable Silica-Wrapped Mn-Doped CsPbCl3 Quantum Dots for Bright White Light-Emitting Devices | 8.0 | 105 | Citations (PDF) |
| 153 | Enhancement of Conductivity and Thermoelectric Property of PEDOT:PSS via Acid Doping and Single Post‐Treatment for Flexible Power Generator | 5.8 | 135 | Citations (PDF) |
| 154 | Resistive switching characteristics of AgInZnS nanoparticles | 5.4 | 10 | Citations (PDF) |
| 155 | Synthesis of CuInZnS quantum dots for cell labelling applications | 5.4 | 20 | Citations (PDF) |
| 156 | Efficient charge carrier separation and excellent visible light photoresponse in Cu2O nanowires | 16.2 | 179 | Citations (PDF) |
| 157 | Performance improvement of perovskite solar cells through enhanced hole extraction: The role of iodide concentration gradient | 6.1 | 185 | Citations (PDF) |
| 158 | All-Inorganic Perovskite CsPb2Br5 Microsheets for Photodetector Application | 1.8 | 39 | Citations (PDF) |
| 159 | PEDOT:PSS monolayers to enhance the hole extraction and stability of perovskite solar cells | 9.3 | 202 | Citations (PDF) |
| 160 | Surface‐Passivated Cesium Lead Halide Perovskite Quantum Dots: Toward Efficient Light‐Emitting Diodes with an Inverted Sandwich Structure | 7.0 | 58 | Citations (PDF) |
| 161 | Enhanced X-ray photon response in solution-synthesized CsPbBr3 nanoparticles wrapped by reduced graphene oxide | 6.1 | 280 | Citations (PDF) |
| 162 | Flexible All-Inorganic Perovskite CsPbBr3 Nonvolatile Memory Device | 8.0 | 213 | Citations (PDF) |
| 163 | CsPbBr3/Reduced Graphene Oxide nanocomposites and their enhanced photoelectric detection application | 7.6 | 72 | Citations (PDF) |
| 164 | Flower-like nickel-zinc-cobalt mixed metal oxide nanowire arrays for electrochemical capacitor applications | 6.0 | 86 | Citations (PDF) |
| 165 | Enhanced Stability and Tunable Photoluminescence in Perovskite CsPbX3/ZnS Quantum Dot Heterostructure | 11.5 | 245 | Citations (PDF) |
| 166 | Swift-heavy ion implanted Nd:YVO4 waveguides with birefringence preservation and Raman gain enhancementOptik, 2017, 140, 579-583 | 2.9 | 3 | Citations (PDF) |
| 167 | Preparation of cubic Cu2O nanoparticles wrapped by reduced graphene oxide for the efficient removal of rhodamine B | 6.0 | 261 | Citations (PDF) |
| 168 | Conductivity Enhancement of PEDOT:PSS via Addition of Chloroplatinic Acid and Its Mechanism | 4.9 | 173 | Citations (PDF) |
| 169 | Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3 films | 6.1 | 460 | Citations (PDF) |
| 170 | Robust Cesium Lead Halide Perovskite Microcubes for Frequency Upconversion Lasing | 7.0 | 71 | Citations (PDF) |
| 171 | Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer | 9.3 | 308 | Citations (PDF) |
| 172 | Tunable photoluminescence of water-soluble AgInZnS–graphene oxide (GO) nanocomposites and their application in-vivo bioimaging | 7.6 | 412 | Citations (PDF) |
| 173 | Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing | 16.2 | 474 | Citations (PDF) |
| 174 | Tunable photoluminescence of CsPbBr3 perovskite quantum dots for light emitting diodes application | 3.2 | 55 | Citations (PDF) |
| 175 | Inverted Planar Perovskite Solar Cells with a High Fill Factor and Negligible Hysteresis by the Dual Effect of NaCl-Doped PEDOT:PSS | 8.0 | 167 | Citations (PDF) |
| 176 | Perovskite CsPb2Br5 Microplate Laser with Enhanced Stability and Tunable Properties | 7.0 | 160 | Citations (PDF) |
| 177 | Two-step method for preparing all-inorganic CsPbBr3 perovskite film and its photoelectric detection application | 2.5 | 68 | Citations (PDF) |
| 178 | Enhanced performance of light-controlled conductive switching in hybrid cuprous oxide/reduced graphene oxide (Cu_2O/rGO) nanocomposites | 3.0 | 572 | Citations (PDF) |
| 179 | Tunable luminescent CsPb_2Br_5 nanoplatelets: applications in light-emitting diodes and photodetectors | 6.4 | 88 | Citations (PDF) |
| 180 | Flexible electrochromic supercapacitor hybrid electrodes based on tungsten oxide films and silver nanowires | 3.4 | 425 | Citations (PDF) |
| 181 | Interdigitated CuS/TiO2 Nanotube Bulk Heterojunctions Achieved via Ion Exchange | 5.3 | 17 | Citations (PDF) |
| 182 | Luminescent AIZS-GO nanocomposites as fluorescent probe for detecting copper(II) ion | 7.6 | 62 | Citations (PDF) |
| 183 | Room temperature single-photon emission and lasing for all-inorganic colloidal perovskite quantum dots | 16.2 | 128 | Citations (PDF) |
| 184 | All-inorganic perovskite CsPb(Br/I)3nanorods for optoelectronic application | 5.0 | 137 | Citations (PDF) |
| 185 | Femtosecond laser direct writing of microholes on roughened ZnO for output power enhancement of InGaN light-emitting diodes | 3.0 | 355 | Citations (PDF) |
| 186 | A facile method for synthesizing AgInZnS/RGO nanocomposites and their photoelectric detection application | 2.5 | 17 | Citations (PDF) |
| 187 | Three dimensional Z-scheme (BiO)2CO3/MoS2 with enhanced visible light photocatalytic NO removal | 20.5 | 142 | Citations (PDF) |
| 188 | Highly pure green light emission of perovskite CsPbBr_3 quantum dots and their application for green light-emitting diodes | 3.0 | 177 | Citations (PDF) |
| 189 | Synthesis of Mn doping Ag–In–Zn–S nanoparticles and their photoluminescence properties | 6.9 | 19 | Citations (PDF) |
| 190 | Hybrid optical fiber add-drop filter based on wavelength dependent light coupling between micro/nano fiber ring and side-polished fiber | 3.4 | 21 | Citations (PDF) |
| 191 | Transient multiexponential signals analysis using Bayesian deconvolution | 1.8 | 9 | Citations (PDF) |
| 192 | Strong yellow emission of ZnO hollow nanospheres fabricated using polystyrene spheres as templates | 6.9 | 122 | Citations (PDF) |
| 193 | Facile synthesis and photoluminescence characterization of AgInZnS hollow nanoparticles | 2.5 | 11 | Citations (PDF) |
| 194 | Fabrication and integration of quasi-one-dimensional hierarchical TiO2nanotubes for dye-sensitized solar cells | 2.4 | 9 | Citations (PDF) |
| 195 | Nanocomposites of AgInZnS and graphene nanosheets as efficient photocatalysts for hydrogen evolution | 5.0 | 24 | Citations (PDF) |
| 196 | Enhanced fluorescence imaging performance of hydrophobic colloidal ZnO nanoparticles by a facile method | 6.0 | 230 | Citations (PDF) |
| 197 | All-optically reconfigurable and tunable fiber surface grating for in-fiber devices: a wideband tunable filter | 3.0 | 19 | Citations (PDF) |
| 198 | Synthesis mechanism and optical properties of well nanoflower-shaped ZnO fabricated by a facile method | 2.6 | 54 | Citations (PDF) |
| 199 | Fabrication of high quality and low cost microlenses on a glass substrate by direct printing technique | 1.8 | 28 | Citations (PDF) |
| 200 | Synthesis of Ag-In-Zn-S alloyed nanorods and their biological application | 2.6 | 6 | Citations (PDF) |
| 201 | A facile method for the synthesis of quaternary Ag–In–Zn–S alloyed nanorods | 5.0 | 15 | Citations (PDF) |
| 202 | Nitrogen doping in cuprous oxide films synthesized by radical oxidation at low temperature | 2.5 | 173 | Citations (PDF) |
| 203 | Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application | 3.0 | 399 | Citations (PDF) |
| 204 | All-optical switching in Sagnac loop mirror containing an ytterbium-doped fiber and fiber Bragg grating | 1.5 | 111 | Citations (PDF) |
| 205 | Analysis of optical switching in a Yb3+-doped fiber Bragg grating by using self-phase modulation and cross-phase modulation | 1.5 | 170 | Citations (PDF) |
| 206 | Thermal resistance reduction in high power superluminescent diodes by using active multi-mode interferometer | 3.0 | 141 | Citations (PDF) |
| 207 | Numerical analysis of optical bistability based on Fiber Bragg Grating cavity containing a high nonlinearity doped-fiber | 2.3 | 78 | Citations (PDF) |
| 208 | High Power and Stable High Coupling Efficiency (66%) Superluminescent Light Emitting Diodes by Using Active Multi-Mode Interferometer | 0.4 | 77 | Citations (PDF) |
| 209 | High-Power ($> 110$ mW) Superluminescent Diodes by Using Active Multimode Interferometer | 1.8 | 145 | Citations (PDF) |
| 210 | Heat effects of amorphous FeCuNbSiB alloy ablated with femtosecond laser | 1.9 | 5 | Citations (PDF) |
| 211 | Phosphonate Diacid Molecule Induced Crystallization Manipulation and Defect Passivation for High‐Performance Inverted MA‐Free Perovskite Solar Cells | 22.5 | 87 | Citations (PDF) |
| 212 | Opportunities and challenges of lead-free metal halide perovskites for luminescence | 7.1 | 26 | Citations (PDF) |
| 213 | In Situ Interfacial Engineering in Perovskite Solar Cells: The Importance of Additives | 17.0 | 22 | Citations (PDF) |
| 214 | Crystallization Modulation Through Electron Transport Layer Surface Reconstruction Enables High‐Performance Full‐Air‐Processed Perovskite Solar Cells | 24.5 | 25 | Citations (PDF) |
| 215 | Development and Challenges of Ga2O3–Based Heterojunctions for Deep-UV Detectors | 6.0 | 17 | Citations (PDF) |
| 216 | Dual-band-tunable all-inorganic Zn-based metal halides for optical anti-counterfeiting | 19.0 | 11 | Citations (PDF) |
| 217 | Room-Temperature-Deposited, Nanometer-Thin Indium-Tin-Oxide for 1-V Operated Thin-Film Transistors | 2.7 | 0 | Citations (PDF) |
| 218 | Highly Luminescent 0D Antimony‐Based Halides for High‐Resolution Flexible X‐Ray Imaging | 9.2 | 3 | Citations (PDF) |
| 219 | Sandwiched Halogen Perovskite as Sensitizing Floating Gate for Reconfigurable Optoelectronic Synapses 0, 4, 499-508 | | 1 | Citations (PDF) |
| 220 | High-sensitivity and low-bias X-ray detectors enabled by high ion migration activation energy and reduced octahedral tilting 0, 1, 100003 | | 0 | Citations (PDF) |
| 221 | PEC‐DFM Hybrid‐Sensor Based on Nanoparticle‐Resolved Estimation for Sensitive and Reversible Glucose Monitoring | 12.6 | 0 | Citations (PDF) |
| 222 | A Rational Design of All-Optically Controlled Optoelectronic Synapses with Bidirectional STP-to-LTP Learning Capabilities | 4.6 | 0 | Citations (PDF) |
| 223 | Miniaturized High-Resolution Passive Microdisk Resonator Spectrometer | 6.0 | 0 | Citations (PDF) |
| 224 | Ion-Gel-Assisted MoS2 Transfer Method for Low-Voltage, High-Performance MoS2/ITZO Heterojunction Phototransistor Application | 2.6 | 0 | Citations (PDF) |
| 225 | High‐Performance Flexible X‐ray Scintillators based on Manganese Halides With Near‐Unity Quantum Yield | 9.2 | 0 | Citations (PDF) |
| 226 | Hot‐Pressing of Single Crystals Enables High‐Performance White‐Light Emitting Copper Halide Scintillators Toward Underwater X‐Ray Imaging | 9.2 | 0 | Citations (PDF) |
| 227 | Weak interactions in mixed symmetric and asymmetric self-assembled monolayers for perovskite solar cells: a classical molecular dynamics view | 2.7 | 0 | Citations (PDF) |
