| 1 | Mechanical and corrosion behavior of CoCrFeNiAl0.3 high entropy alloy seamless tubes | 4.9 | 4 | Citations (PDF) |
| 2 | Cooperative game during phase transformations in complex alloy systems | 4.3 | 6 | Citations (PDF) |
| 3 | Enhancement of strength-ductility trade-off in Al5Fe25Cr25Ni42.5Ti2.5 high entropy alloy through annealing twins | 5.4 | 24 | Citations (PDF) |
| 4 | High-strength and low-thermal-conductivity porous multi-principal cation mullite ceramic | 4.3 | 11 | Citations (PDF) |
| 5 | Mechanistic cohesive zone laws for fatigue cracks: Nonlinear field projection and in situ synchrotron X-ray diffraction (S-XRD) measurements | 4.7 | 11 | Citations (PDF) |
| 6 | Developing novel low-density high-entropy superalloys with high strength and superior creep resistance guided by automated machine learning | 7.6 | 43 | Citations (PDF) |
| 7 | Face-centered-cubic-structured (Co0.4Fe0.3Ni0.3)100-x(Al0.4Mn0.6)x high-entropy alloy with enhanced soft magnetic properties and tensile ductility | 3.8 | 5 | Citations (PDF) |
| 8 | First-principles investigation of local atomic environment and its impact on properties in non-equiatomic CoCrFeNi high-entropy alloys | 4.9 | 4 | Citations (PDF) |
| 9 | Rigorous computation of short-range order unifies its controversial effects in complex concentrated alloys | 7.6 | 11 | Citations (PDF) |
| 10 | High-throughput design of a light and strong refractory eutectic medium entropy alloy with outstanding He-ion irradiation resistance | 8.1 | 14 | Citations (PDF) |
| 11 | Thin film combinatorial sputtering of TaTiHfZr refractory compositionally complex alloys for rapid materials discovery | 5.4 | 10 | Citations (PDF) |
| 12 | Mechanical behavior and damage mechanisms of Fe40Mn20Cr20Ni20 high entropy alloys under ballistic impacts | 5.4 | 6 | Citations (PDF) |
| 13 | Effects of Ti on the ageing microstructure and mechanical properties of Ni-Co-Cr-Ti multi-principal element alloy | 5.4 | 4 | Citations (PDF) |
| 14 | Developing novel high-Si 12 % Cr reduced-activation ferritic/martensitic cladding alloys via the cluster-formula approach and CALPHAD method | 5.4 | 3 | Citations (PDF) |
| 15 | Mechanical behavior of AlxCoCrFeNi high-entropy-alloy rods in a wide temperature range | 5.4 | 13 | Citations (PDF) |
| 16 | Hierarchical precipitation in a partially recrystallized matrix makes an ultrastrong and ductile lightweight steel | 12.3 | 9 | Citations (PDF) |
| 17 | Corrosion of TiHfZrNbx high-entropy alloys in a simulated condition of proton exchange membrane water electrolyser | 4.1 | 13 | Citations (PDF) |
| 18 | Outstanding shear resistance in a low-density refractory Ti3NbVAl high-entropy alloy subjected to dynamic loading | 4.3 | 9 | Citations (PDF) |
| 19 | A Xanthium sibiricum biomimetic Fe‐based medium‐entropy alloy with significant antibacterial and mechanical behaviors | 8.5 | 67 | Citations (PDF) |
| 20 | Microstructure evolution and plastic deformation behavior of DR-B2/ID-FCC phase lightweight high entropy alloy during improving thermal processing properties | 5.1 | 10 | Citations (PDF) |
| 21 | Face-centered-cubic (FCC) to body-centered-cubic (BCC) phase-transformation-induced strengthening of nanoscale harmonic-like high-entropy alloys | 3.7 | 14 | Citations (PDF) |
| 22 | Serration behavior and brittle phase-induced mechanical transitions in wrought Al0.3CoCrFeNi high-entropy alloy from 100 °C to 800 °C | 5.4 | 9 | Citations (PDF) |
| 23 | Relation between residual stress and microstructure evolution in C19400 alloy based on different annealing parameters | 1.9 | 6 | Citations (PDF) |
| 24 | Fundamental mechanisms of discontinuous deformation in metals for cryogenic-environment applications | 7.6 | 15 | Citations (PDF) |
| 25 | A strategy for Triple-TRIP-induced ultra-high room-temperature ductility of high-entropy alloys | 4.3 | 8 | Citations (PDF) |
| 26 | Low elastic modulus and superb antibacterial performance in copper-bearing refractory high-entropy alloys | 4.9 | 6 | Citations (PDF) |
| 27 | Research Progress of Self-Healing Coatings on Ships Against Biological Pollution: A Review | 2.0 | 11 | Citations (PDF) |
| 28 | Extraordinary strength-ductility synergy in chemically complex intermetallic alloys with hierarchical dual-phase nanostructures | 7.6 | 15 | Citations (PDF) |
| 29 | Multi-attribute-physical-law-informed transfer learning to design high-entropy Elinvar alloys | 5.4 | 4 | Citations (PDF) |
| 30 | Establishing a quantitative relationship between processing, microstructure, and formability in Ni47Ti33Hf20 shape memory alloy through multivariate decision tree optimization | 12.3 | 7 | Citations (PDF) |
| 31 | In situ synchrotron X-ray diffraction and crystal plasticity studies of the deformation and fatigue crack growth behavior in a TRIP-assisted advanced high strength steel | 7.6 | 14 | Citations (PDF) |
| 32 | Mechanical behavior of BCC-superalloys | 4.3 | 9 | Citations (PDF) |
| 33 | Machine learning of hardness and composition in Al–Co–Cr–Fe–Ni–Mo–Ti high-entropy alloys | 3.7 | 6 | Citations (PDF) |
| 34 | Machine Learning-Based Computational Design Methods for High-Entropy Alloys | 2.1 | 38 | Citations (PDF) |
| 35 | Influence of short-range order on precipitate orientation relationships in aluminum containing FCC high entropy alloys | 3.8 | 5 | Citations (PDF) |
| 36 | Negative mixing enthalpy route guides strong and ductile soft magnetic high-entropy alloys with high saturation magnetization | 12.6 | 24 | Citations (PDF) |
| 37 | A comprehensive evaluation of the theoretical models for the constitutive relationship of Fe49Mn33.2Cr9.6Co8.2 high-entropy alloy based on microstructural evolution | 4.2 | 2 | Citations (PDF) |
| 38 | Synergistic increasing the Strength–Elasticity in a CoNiV medium-entropy alloy via cold drawing | 5.4 | 7 | Citations (PDF) |
| 39 | Multiscale mechanics of architectured dual-phase high-entropy alloys: Dislocation-interface synergy governing strength-ductility paradigm | 4.9 | 1 | Citations (PDF) |
| 40 | A crystal plasticity-based reversible phase transformation model for Ti49Zr20Hf15Al10Nb6 high-entropy alloy | 7.6 | 1 | Citations (PDF) |
| 41 | Data Science in Order and Disorder of High-Entropy Materials | 1.8 | 5 | Citations (PDF) |
| 42 | Enabling high strength yet ductility in a refractory high-entropy alloy through oxygen-nitrogen synergistic effect | 7.6 | 38 | Citations (PDF) |
| 43 | Effect of Co content on mechanical and corrosion properties of TiZrHfNiCuCo high-entropy shape memory alloy | 1.5 | 0 | Citations (PDF) |
| 44 | Hot processing map and antibacterial properties of Fe‐based medium‐entropy alloys | 8.5 | 1 | Citations (PDF) |
| 45 | An integration study of corrosion and mechanical behaviors of Ti-/Zr-/Hf-doped cobalt-based high-entropy alloys | 5.4 | 70 | Citations (PDF) |
| 46 | Preparation and characterization of a dual-structure-embedded, reinforced titanium matrix composite powder using an ultrasonic atomization method | 4.9 | 14 | Citations (PDF) |
| 47 | High strength and ductility in a lightweight AlTiNbZrTa refractory high-entropy alloy enabled by nanophase precipitation and solute segregation | 9.6 | 34 | Citations (PDF) |
| 48 | High-entropy oxide ceramics as structural and barrier-coating materials 2025, 1, 100067 | | 8 | Citations (PDF) |
| 49 | Deep Learning Applications in the Analysis of Wear Mechanisms in Metallic Materials: A Review 2025, 7, 2936-2954 | | 4 | Citations (PDF) |
| 50 | Automatic intelligent multiscale simulation to predict mechanical properties and deformation mechanism of complex concentrated alloys | 7.6 | 7 | Citations (PDF) |
| 51 | Dislocation glide in Al0.3CoCrFeNi: Insights from molecular dynamics and statistical analysis | 1.8 | 3 | Citations (PDF) |
| 52 | Unveiling the dynamic mechanical behavior with phase-transformation and microstructural evolution in a novel dual-phase high-entropy alloy | 5.4 | 3 | Citations (PDF) |
| 53 | Observation of short-range order in refractory high-entropy alloys from atomic-positions deviation using STEM and atomistic simulations | 4.1 | 5 | Citations (PDF) |
| 54 | Achieving a better strength-plasticity synergy in W-containing multi-principal-element alloy with high adiabatic shear susceptibility | 5.4 | 1 | Citations (PDF) |
| 55 | Differentiating electron diffuse scattering via 4D-STEM spatial fluctuation and correlation analysis in complex FCC alloys | 1.7 | 5 | Citations (PDF) |
| 56 | Research on the sensitivity behavior of special microstructural transformations during the hot deformation process of Fe49Mn33.2Cr9.6Co8.2 high-entropy alloy | 1.5 | 2 | Citations (PDF) |
| 57 | Crack tip dislocation activity in refractory high-entropy alloys | 8.2 | 31 | Citations (PDF) |
| 58 | Utilizing cluster percolation theory to analyze electrical resistivity jumps in high-entropy alloy thin films containing small atoms | 4.3 | 7 | Citations (PDF) |
| 59 | Temperature gradient enhances the solidification process and properties of a CoCrFeNi high-entropy alloy: Atomic insights from molecular dynamics simulations | 2.6 | 22 | Citations (PDF) |
| 60 | The columnar to equiaxed transition of CoCrNi medium-entropy alloy fabricated by laser directed energy deposition | 5.4 | 44 | Citations (PDF) |
| 61 | Roots seeking of multiple shear-bands in amorphous alloys at the atomic scale | 2.6 | 8 | Citations (PDF) |
| 62 | Magnificent tensile strength and ductility synergy in a NiCoCrAlTi high-entropy alloy at elevated temperature | 4.9 | 41 | Citations (PDF) |
| 63 | Origin of thermal deformation induced crystallization and microstructure formation in additive manufactured FCC, BCC, HCP metals and its alloys | 10.9 | 26 | Citations (PDF) |
| 64 | A maximum temperature rise model of the shear band in bulk metallic glasses | 2.6 | 4 | Citations (PDF) |
| 65 | Effect of Ti/Nb/Ta addition on the γ/γ' coherent microstructure in low-density and high-strength Co-Al-W-Mo-based superalloys | 12.3 | 36 | Citations (PDF) |
| 66 | Advanced high-entropy alloys breaking the property limits of current materials | 12.3 | 106 | Citations (PDF) |
| 67 | TiZrHfNb refractory high-entropy alloys with twinning-induced plasticity | 12.3 | 80 | Citations (PDF) |
| 68 | Fatigue life prediction of the FCC-based multi-principal element alloys via domain knowledge-based machine learning | 4.3 | 26 | Citations (PDF) |
| 69 | Data driving design of high-entropy alloys for lightweight and dynamic applications | 5.1 | 41 | Citations (PDF) |
| 70 | Effects of Ni content on microstructure and fracture toughness of the ZrN/TiNiN nano-multilayer films | 4.9 | 12 | Citations (PDF) |
| 71 | Effect of α″-Ti Martensitic Phase Formation on Plasticity in Ti–Fe–Sn Ultrafine Eutectic Composites | 2.0 | 2 | Citations (PDF) |
| 72 | Optimization of grain-selection behavior in the spiral selector during Cusp-magnetic-field-assisted directional solidification of single-crystal superalloy | 4.9 | 14 | Citations (PDF) |
| 73 | Effect of Additive and Current Density on Microstructures and Corrosion Behavior of a Multi-Component NiFeCoCu Alloy Prepared by Electrodeposition | 1.8 | 10 | Citations (PDF) |
| 74 | Structural damage and phase stability of cobalt-free FeCrNi medium-entropy alloy under high-fluence ion irradiation | 5.1 | 21 | Citations (PDF) |
| 75 | Statistical analysis of serrated flows in CoNiV medium-entropy alloy | 2.3 | 3 | Citations (PDF) |
| 76 | Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders | 5.3 | 62 | Citations (PDF) |
| 77 | Phase-field simulation of α-α′ phase separation in nuclear Fe-Cr-Al-based alloys induced by chemical composition and irradiation | 1.5 | 2 | Citations (PDF) |
| 78 | Uncovering origin of grain boundary resistance to irradiation damage in NiCoCr multi-principal element alloys | 10.9 | 32 | Citations (PDF) |
| 79 | Enhanced plasticity in refractory high-entropy alloy via multicomponent ceramic nanoparticle | 12.3 | 17 | Citations (PDF) |
| 80 | A hierarchical multiscale crystal plasticity model for refractory multi-principal element alloys | 8.2 | 27 | Citations (PDF) |
| 81 | Low cycle fatigue performances of Al0.3CoCrFeNi high entropy alloys: In situ neutron diffraction studies on the precipitation effects | 3.8 | 14 | Citations (PDF) |
| 82 | Plastic deformation and strengthening mechanism in CoNiV medium-entropy alloy fiber | 10.9 | 32 | Citations (PDF) |
| 83 | Dislocation flow turbulence simultaneously enhances strength and ductility | 5.2 | 22 | Citations (PDF) |
| 84 | A general micromechanics-based model for precipitate strengthening and fracture toughness in polycrystal high entropy alloys | 10.9 | 20 | Citations (PDF) |
| 85 | Enhanced dynamic-mechanical property and microstructural mechanism of a FeCoNiCrMo0.2 high-entropy alloy fabricated using powder bed fusion | 4.9 | 14 | Citations (PDF) |
| 86 | Sparse identification-assisted exploration of the atomic-scale deformation mechanism in multiphase CoCrFeNi high-entropy alloys | 3.2 | 6 | Citations (PDF) |
| 87 | Unveiling deformation behavior and damage mechanism of irradiated high entropy alloys | 12.3 | 16 | Citations (PDF) |
| 88 | Synthesis and Unique Behaviors of High-Purity HEA Nanoparticles Using Femtosecond Laser Ablation | 3.0 | 22 | Citations (PDF) |
| 89 | Machine-learning-assisted modeling of alloy ordering phenomena at the electronic scale through electronegativity | 2.3 | 9 | Citations (PDF) |
| 90 | Influence of the special behavior of interpass retention-relaxation on the softening mechanism of precipitation strengthened GH99 alloy during multi-pass hot deformation | 4.9 | 6 | Citations (PDF) |
| 91 | The large magnetocaloric effect in GdErHoCoM (M = Cr and Mn) high-entropy alloy ingots with orthorhombic structures | 2.3 | 7 | Citations (PDF) |
| 92 | Phase prediction of high-entropy alloys based on machine learning and an improved information fusion approach | 2.6 | 29 | Citations (PDF) |
| 93 | Crystal plasticity approach for predicting mechanical responses in wire-arc directed energy deposition of NbZr1 refractory alloy | 2.0 | 2 | Citations (PDF) |
| 94 | Short-range order effects on the thermodynamic behavior of Al CoCrFeNi high-entropy alloys | 2.6 | 21 | Citations (PDF) |
| 95 | Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys | 2.3 | 6 | Citations (PDF) |
| 96 | Deformation-induced HCP phase transformation of CrCoNiSi0.3 medium-entropy alloy under high strain rate tension | 2.3 | 6 | Citations (PDF) |
| 97 | Exceptional fatigue-resistant austenitic stainless steel for cryogenic applications | 2.5 | 5 | Citations (PDF) |
| 98 | Microstructures and precipitation behaviors of a hypoeutectic high-entropy alloy prepared by laser powder bed fusion | 2.0 | 2 | Citations (PDF) |
| 99 | Effect of Mn content on corrosion and mechanical behaviors of Fe-based medium entropy alloy | 4.9 | 13 | Citations (PDF) |
| 100 | Improving tensile and impact properties of Fe50Mn30Co10Cr10 high entropy alloy via microstructural engineering | 3.8 | 9 | Citations (PDF) |
| 101 | Research Progress on Metallic Heterostructure Materials | 1.0 | 4 | Citations (PDF) |
| 102 | Edge dislocation-induced high-temperature strengthening in the Ti37V15Nb22Hf23W3 refractory high-entropy alloys | 5.4 | 25 | Citations (PDF) |
| 103 | Low-frequency conductivity of low wear high-entropy alloys | 10.8 | 22 | Citations (PDF) |
| 104 | Chemical short-range-order induced multiscale strengthening in refractory medium entropy alloys | 2.4 | 10 | Citations (PDF) |
| 105 | A novel low-density and high-strength Fe-Ni-base high-entropy superalloy with stable γ/γ' coherent microstructure at 1023 K | 4.3 | 32 | Citations (PDF) |
| 106 | Machine learning studies for magnetic compositionally complex alloys: A critical review | 32.4 | 31 | Citations (PDF) |
| 107 | Relationship between the unique microstructures and behaviors of high-entropy alloys | 5.6 | 118 | Citations (PDF) |
| 108 | Influence of high-strain-rate compression and subsequent heat treatment on (TiNbZr)89(AlTa)11 refractory high-entropy alloys: Dynamic-mechanical behavior and microstructural changes | 5.4 | 36 | Citations (PDF) |
| 109 | Microstructure and mechanical properties of Co31.5Cr7Fe30Ni31.5 high-entropy alloy powder produced by plasma rotating electrode process and its applications in additive manufacturing | 4.9 | 17 | Citations (PDF) |
| 110 | Synergistic strengthening mechanisms of dual-phase CoCrFeMnNi high-entropy alloys with grain nano-gradient structure | 3.8 | 11 | Citations (PDF) |
| 111 | Achieving strength–ductility synergy in novel paramagnetic Fe‐based medium‐entropy alloys through deep cryogenic deformation | 8.5 | 13 | Citations (PDF) |
| 112 | A dislocation theory-based model for brittle-to-ductile transition in multi-principal element alloys | 10.9 | 8 | Citations (PDF) |
| 113 | Uncovering Nanoindention Behavior of Amorphous/Crystalline High-Entropy-Alloy Composites | 2.1 | 2 | Citations (PDF) |
| 114 | Achieving excellent uniform tensile ductility and strength in dislocation-cell-structured high-entropy alloys | 10.9 | 79 | Citations (PDF) |
| 115 | Microstructure and mechanical properties of CoCrFeNiAl0.5Ti0.1 high entropy alloy rod | 5.4 | 9 | Citations (PDF) |
| 116 | The structural origins of rejuvenation in Zr58Cu22Fe8Al12 bulk metallic glasses | 3.8 | 10 | Citations (PDF) |
| 117 | Data-driven conditional probability to predict fatigue properties of multi-principal element alloys (MPEAs) | 5.6 | 6 | Citations (PDF) |
| 118 | A phase field crystal model for real-time grain boundary formation and motion in complex concentration alloy | 7.6 | 14 | Citations (PDF) |
| 119 | Nanoprecipitate improves high strain-rate deformability in a high-entropy alloy | 6.4 | 14 | Citations (PDF) |
| 120 | Microstructures, physical and corrosion behavior of NiCoFeCu high-entropy alloy nanocomposite coatings electro-co-deposited with nano-Si3N4 particles | 4.9 | 12 | Citations (PDF) |
| 121 | Role of Niobium on the Passivation Mechanisms of TiHfZrNb High-Entropy Alloys in Hanks’ Simulated Body Fluid | 3.6 | 14 | Citations (PDF) |
| 122 | Femtosecond laser joining of Stellite and stainless steel | 1.2 | 2 | Citations (PDF) |
| 123 | Strength-ductility synergy through microstructural and compositional heterogeneity in directed energy deposition additive manufacturing of face-centered cubic materials | 4.9 | 15 | Citations (PDF) |
| 124 | Precipitation-strengthened micromechanical behaviors of magnesium alloy under cyclic loading | 10.0 | 3 | Citations (PDF) |
| 125 | High-entropy alloys as magnetic shielding materials in low-frequency wireless power transmission | 3.1 | 7 | Citations (PDF) |
| 126 | Local chemical order enables an ultrastrong and ductile high-entropy alloy in a cryogenic environment | 8.1 | 116 | Citations (PDF) |
| 127 | Integrated design of aluminum-enriched high-entropy refractory B2 alloys with synergy of high strength and ductility | 8.1 | 65 | Citations (PDF) |
| 128 | Sustainable high-entropy materials? | 8.1 | 56 | Citations (PDF) |
| 129 | Achieving high strength-ductility synergy in a Mg97Y1Zn1Ho1 alloy via a nano-spaced long-period stacking-ordered phase | 10.0 | 37 | Citations (PDF) |
| 130 | Viscoelasticity-induced structure anisotropy in amorphous materials | 4.3 | 1 | Citations (PDF) |
| 131 | Mesoscopic-scale complexity in macroscopically-uniform plastic flow of an Al0.3CoCrFeNi high-entropy alloy | 7.6 | 52 | Citations (PDF) |
| 132 | Formation of a protective oxide layer with enhanced wear and corrosion resistance by heating the TiZrHfNbFe0.5 refractory multi-principal element alloy at 1,000 °C | 4.3 | 23 | Citations (PDF) |
| 133 | Passivity of AlCrFeMnTi and AlCrFeCoNi high–entropy alloys in Hanks’ solution | 7.2 | 23 | Citations (PDF) |
| 134 | A remarkable toughening high-entropy-alloy wire with a bionic bamboo fiber heterogeneous structure | 4.3 | 48 | Citations (PDF) |
| 135 | Evaluating the solid solution, local chemical ordering, and precipitation strengthening contributions in multi-principal-element alloys | 4.9 | 11 | Citations (PDF) |
| 136 | Data-driven investigation of microstructure and surface integrity in additively manufactured multi-principal-element alloys | 4.9 | 13 | Citations (PDF) |
| 137 | Toward the design of ultrahigh-entropy alloys via mining six million texts | 10.8 | 90 | Citations (PDF) |
| 138 | Predict the phase formation of high-entropy alloys by compositions | 4.9 | 97 | Citations (PDF) |
| 139 | Effects of Y addition on the microstructures and mechanical behavior of ZrOxNy/V2O3-Y nano-multilayered films | 5.4 | 4 | Citations (PDF) |
| 140 | Microstructures and mechanical behavior of non-equiatomic Co29Cr29Fe29Ni13-V high-entropy alloys at room and cryogenic temperatures | 5.4 | 13 | Citations (PDF) |
| 141 | Accelerating the design of high-entropy alloys with high hardness by machine learning based on particle swarm optimization | 3.8 | 54 | Citations (PDF) |
| 142 | Achieving sustainable strain hardening in a carbon-doped CuFeMnNi high-entropy alloy via dual-level heterogeneous microstructures | 4.9 | 26 | Citations (PDF) |
| 143 | Dataset for Fracture and Impact Toughness of High-Entropy Alloys | 3.8 | 12 | Citations (PDF) |
| 144 | Achieving strength and ductility synergy via a nanoscale superlattice precipitate in a cast Mg-Y-Zn-Er alloy | 10.9 | 70 | Citations (PDF) |
| 145 | A review on the dynamic-mechanical behaviors of high-entropy alloys | 32.4 | 305 | Citations (PDF) |
| 146 | Serrated flow in NaI:Tl scintillator crystals | 12.3 | 6 | Citations (PDF) |
| 147 | A novel cobalt-free oxide dispersion strengthened medium-entropy alloy with outstanding mechanical properties and irradiation resistance | 12.3 | 111 | Citations (PDF) |
| 148 | Micromechanical origin for the wide range of strength-ductility trade-off in metastable high entropy alloys† | 4.3 | 24 | Citations (PDF) |
| 149 | Multiscale modelling of irradiation damage behavior in high entropy alloys | 7.9 | 19 | Citations (PDF) |
| 150 | CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy | 7.6 | 261 | Citations (PDF) |
| 151 | A physics-based machine-learning approach for modeling the temperature-dependent yield strengths of medium- or high-entropy alloys | 2.5 | 9 | Citations (PDF) |
| 152 | Two-Step Isothermal Bainitic Transformation in Medium-Carbon Low-Si Steels with Exceptional Mechanical Properties and Wear Resistance | 1.1 | 6 | Citations (PDF) |
| 153 | Irradiation hardening behavior of high entropy alloys using random field theory informed discrete dislocation dynamics simulation | 10.9 | 51 | Citations (PDF) |
| 154 | A physically-based constitutive model for the prediction of yield strength in the precipitate-hardened high-entropy alloys | 2.4 | 6 | Citations (PDF) |
| 155 | Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications | 7.6 | 302 | Citations (PDF) |
| 156 | Short-range ordering alters the dislocation nucleation and propagation in refractory high-entropy alloys | 12.6 | 97 | Citations (PDF) |
| 157 | Nanoscale fluctuation of stacking fault energy strengthens multi-principal element alloys | 12.3 | 12 | Citations (PDF) |
| 158 | Mining of lattice distortion, strength, and intrinsic ductility of refractory high entropy alloys | 8.0 | 108 | Citations (PDF) |
| 159 | Hierarchical precipitates facilitate the excellent strength-ductility synergy in a CoCrNi-based medium-entropy alloy | 5.4 | 18 | Citations (PDF) |
| 160 | A criterion of the critical threshold of the maximum shear stress in bulk metallic glasses with cryogenic thermal cycling by statistics in nanoindentation | 5.4 | 10 | Citations (PDF) |
| 161 | Special hot working plastic deformation behavior and microstructure evolution mechanism of single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy | 4.9 | 19 | Citations (PDF) |
| 162 | Hardening-softening of Al0.3CoCrFeNi high-entropy alloy under nanoindentation | 5.4 | 162 | Citations (PDF) |
| 163 | Evolution of the microstructures, magnetic and mechanical behaviors of Co47.5Fe28.5Ni19Si3.4Al1.6 high-entropy alloy fabricated by laser powder bed fusion | 2.0 | 18 | Citations (PDF) |
| 164 | Recent Advances on Lightweight High-Entropy Alloys: Process, Design, and Applications | 2.1 | 21 | Citations (PDF) |
| 165 | Effect of microstructural evolution on corrosion behavior of Al0.7Cr2FeCoNi high-entropy alloy | 4.9 | 13 | Citations (PDF) |
| 166 | Microstructure and mechanical properties of a nanoscale-precipitate-strengthened reduced-activation refractory complex concentrated alloy | 3.4 | 12 | Citations (PDF) |
| 167 | Effect of laser-shock peening on the structure and nano-mechanical behavior of a Ti-based metallic glass | 4.8 | 8 | Citations (PDF) |
| 168 | Effects of nitrogen content on microstructures and mechanical behavior of (TiTaCrMoNb)Nx films | 5.4 | 15 | Citations (PDF) |
| 169 | Self-lubricating behavior of a PdCuNiP glassy alloy by in-situ nanocrystallization during dry friction | 2.6 | 2 | Citations (PDF) |
| 170 | Compositional Dependence of the Recrystallization and Grain Growth in Strongly-distorted Pd-containing Multi-Component Equiatomic Alloys | 2.5 | 6 | Citations (PDF) |
| 171 | Evolution of microstructure and residual stress for a lead-frame Cu-2.13Fe-0.026 P (wt%) alloy | 4.9 | 24 | Citations (PDF) |
| 172 | Deformation Defects Characterization in Short-range Ordered CrCoNi using Fast Electron Detectors and 4D-STEM | 0.3 | 2 | Citations (PDF) |
| 173 | Effects of niobium on the microstructure, corrosion, and mechanical behavior of ultra-fine lamellar Al0.3CrFeCoNiNbx eutectic high-entropy alloys | 4.9 | 34 | Citations (PDF) |
| 174 | Atomic faulting induced exceptional cryogenic strain hardening in gradient cell–structured alloy | 26.1 | 179 | Citations (PDF) |
| 175 | Development and characterization of a low-density TiNbZrAlTa refractory high entropy alloy with enhanced compressive strength and plasticity | 4.2 | 61 | Citations (PDF) |
| 176 | Dynamic mechanical properties and σ precipitates strengthening of a NiCrFeCoMo0.2 high-entropy alloy additively manufactured by selective laser melting | 4.9 | 27 | Citations (PDF) |
| 177 | A prediction model for the failure threshold in a CoNiV medium-entropy alloy | 1.6 | 4 | Citations (PDF) |
| 178 | A review on microstructures and mechanical properties of protective nano-multilayered films or coatings | 4.9 | 51 | Citations (PDF) |
| 179 | Coalescence of Al0.3CoCrFeNi polycrystalline high-entropy alloy in hot-pressed sintering: a molecular dynamics and phase-field study | 8.0 | 138 | Citations (PDF) |
| 180 | Spinodal decomposition and radiation damage of a FeCuMnNi high-entropy alloy | 1.1 | 3 | Citations (PDF) |
| 181 | Ideal plasticity and shape memory of nanolamellar high-entropy alloys | 8.1 | 22 | Citations (PDF) |
| 182 | Scaling and Complexity of Stress Fluctuations Associated with Smooth and Jerky Flow in FeCoNiTiAl High-Entropy Alloy | 1.8 | 5 | Citations (PDF) |
| 183 | Microstructure and mechanical properties of cold spray additive manufactured and post heat treated high-entropy alloys with mixed CoCrFeNi and Ti powders | 4.9 | 25 | Citations (PDF) |
| 184 | Influence of chemistry and temperature on mechanical behavior and deformation mechanisms of refractory high-entropy alloys: an integrated simulation-modeling analysis | 2.4 | 11 | Citations (PDF) |
| 185 | Porosity modeling in a TiNbTaZrMo high-entropy alloy for biomedical applications | 4.0 | 42 | Citations (PDF) |
| 186 | Ultrastrong and ductile BCC high-entropy alloys with low-density via dislocation regulation and nanoprecipitates | 12.3 | 207 | Citations (PDF) |
| 187 | Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy | 5.4 | 32 | Citations (PDF) |
| 188 | Simultaneously enhanced strength-ductility of AlCoCrFeNi2.1 eutectic high-entropy alloy via additive manufacturing | 5.4 | 125 | Citations (PDF) |
| 189 | Modeling the competition between solid solution and precipitate strengthening of alloys in a 3D space | 10.9 | 52 | Citations (PDF) |
| 190 | Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications | 3.8 | 137 | Citations (PDF) |
| 191 | Ultrasonic-vibration-enhanced plasticity of an entropic alloy at room temperature | 7.6 | 74 | Citations (PDF) |
| 192 | Pitting Corrosion Susceptibility of Microstructural Features in a Compositionally Complex Ferritic Steel as a Function of Titanium Concentration | 0.8 | 3 | Citations (PDF) |
| 193 | Biocompatibility of NbTaTiVZr with Surface Modifications for Osteoblasts | 3.8 | 7 | Citations (PDF) |
| 194 | Machine-learning and high-throughput studies for high-entropy materials | 15.1 | 150 | Citations (PDF) |
| 195 | A Focused Review on Engineering Application of Multi-Principal Element Alloy | 2.0 | 45 | Citations (PDF) |
| 196 | Effect of annealing on mechanical and thermoelectric properties of a Al2CoCrFeNi high-entropy alloy | 5.4 | 41 | Citations (PDF) |
| 197 | Uncertainty and statistics of dislocation-precipitate interactions on creep resistance | 2.9 | 3 | Citations (PDF) |
| 198 | Optimize the Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloys by Thermo-Mechanical Processing | 1.8 | 9 | Citations (PDF) |
| 199 | Effects of grain boundary on irradiation-induced zero-dimensional defects in an irradiated copper | 3.2 | 15 | Citations (PDF) |
| 200 | Vacancy dependent mechanical behaviors of high-entropy alloy | 8.2 | 47 | Citations (PDF) |
| 201 | The influence of WS2 layer thickness on microstructures and mechanical behavior of high-entropy (AlCrTiZrNb)N/WS2 nanomultilayered films | 4.8 | 7 | Citations (PDF) |
| 202 | On the torsional and coupled torsion-tension/compression behavior of magnesium alloy solid rod: A crystal plasticity evaluation | 10.9 | 52 | Citations (PDF) |
| 203 | Long-term tensile creep behavior of a family of FCC-structured multi-component equiatomic solid solution alloys | 4.3 | 14 | Citations (PDF) |
| 204 | Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy | 10.9 | 186 | Citations (PDF) |
| 205 | Mechanical Behavior and Thermal Stability of (AlCrTiZrMo)N/ZrO2 Nano-Multilayered High-Entropy Alloy Film Prepared by Magnetron Sputtering | 1.8 | 5 | Citations (PDF) |
| 206 | Performance-oriented multistage design for multi-principal element alloys with low cost yet high efficiency | 8.5 | 25 | Citations (PDF) |
| 207 | Effect of Zr addition on the stability of precipitated Laves phase and mechanical properties of Fe–Cr–Al-based alloys at high temperatures | 5.1 | 14 | Citations (PDF) |
| 208 | Recent Progress with BCC-Structured High-Entropy Alloys | 1.8 | 130 | Citations (PDF) |
| 209 | Enhancing strength and ductility via crystalline-amorphous nanoarchitectures in TiZr-based alloys | 8.1 | 86 | Citations (PDF) |
| 210 | Microstructures and Properties of the Low-Density Al15Zr40Ti28Nb12M(Cr, Mo, Si)5 High-Entropy Alloys | 1.8 | 30 | Citations (PDF) |
| 211 | Ti–Zr–Hf–Nb–Ta–Sn high‐entropy alloys with good properties as potential biomaterials | 8.5 | 45 | Citations (PDF) |
| 212 | Phase transformation via atomic-scale periodic interfacial energy | 4.1 | 4 | Citations (PDF) |
| 213 | Novel Ti-Zr-Hf-Nb-Fe refractory high-entropy alloys for potential biomedical applications | 4.9 | 110 | Citations (PDF) |
| 214 | A lightweight refractory complex concentrated alloy with high strength and uniform ductility | 2.5 | 18 | Citations (PDF) |
| 215 | Chemical-element-distribution-mediated deformation partitioning and its control mechanical behavior in high-entropy alloys | 12.3 | 20 | Citations (PDF) |
| 216 | In-Situ Study of Microstructure Evolution of Spinodal Decomposition in an Al-Rich High-Entropy Alloy | 2.0 | 11 | Citations (PDF) |
| 217 | Microstructural and electrical behavior of NiCr/Al nanomultilayered films prepared by magnetron sputtering | 4.9 | 8 | Citations (PDF) |
| 218 | A Strategic Design Route to Find a Depleted Uranium High-Entropy Alloy with Great Strength | 1.8 | 9 | Citations (PDF) |
| 219 | Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping | 4.9 | 32 | Citations (PDF) |
| 220 | Microstructures, Mechanical Behavior, and Radiation Damage of (TiVCr)x-(TaW)1-x Binary System High-Entropy Alloy Films | 1.8 | 7 | Citations (PDF) |
| 221 | Unraveling a novel precipitate enrichment dependent strengthening behaviour in nickel-based superalloy | 10.9 | 38 | Citations (PDF) |
| 222 | A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility | 7.6 | 237 | Citations (PDF) |
| 223 | Remarkable embrittlement and its origins in quenched reactor pressure vessel steels | 2.5 | 3 | Citations (PDF) |
| 224 | Exploring the amorphous phase formation and properties of W-Ta-(Cr, Fe, Ni) high-entropy alloy gradient films via a high-throughput technique | 4.9 | 21 | Citations (PDF) |
| 225 | Plastic anisotropy and twin distributions near the fatigue crack tip of textured Mg alloys from in situ synchrotron X-ray diffraction measurements and multiscale mechanics modeling | 4.7 | 19 | Citations (PDF) |
| 226 | Entropy versus enthalpy in hexagonal‐close‐packed high‐entropy alloys | 8.5 | 18 | Citations (PDF) |
| 227 | Effects of transient thermal shock on the microstructures and corrosion properties of a reduced activation high-entropy alloy | 4.9 | 37 | Citations (PDF) |
| 228 | Niobium addition improves the corrosion resistance of TiHfZrNbx high-entropy alloys in Hanks’ solution | 4.1 | 36 | Citations (PDF) |
| 229 | Heterogeneous lattice strain strengthening in severely distorted crystalline solids | 5.2 | 83 | Citations (PDF) |
| 230 | Effects of N2/Ar flow ratio on the structures and mechanical behavior of ZrOxNy/V2O3 nano-multilayered films | 5.4 | 7 | Citations (PDF) |
| 231 | Elastic behavior of binary and ternary refractory multi-principal-element alloys | 5.4 | 39 | Citations (PDF) |
| 232 | Effect of Zr addition on the local structure and mechanical properties of Ti–Ta–Nb–Zr refractory high-entropy alloys | 4.9 | 42 | Citations (PDF) |
| 233 | Fatigue dataset of high-entropy alloys | 3.8 | 18 | Citations (PDF) |
| 234 | Precipitation behavior of second phases and mechanical property of Fe–Cr–Al–Mo–Nb/Ta/Zr alloy during aging at 1073 K | 4.9 | 13 | Citations (PDF) |
| 235 | Phase prediction and effect of intrinsic residual strain on phase stability in high-entropy alloys with machine learning | 4.9 | 55 | Citations (PDF) |
| 236 | Microstructure and formation mechanisms of nanotwins in the shear band in a FeCoNiCrMo0.2 high-entropy alloy | 4.9 | 29 | Citations (PDF) |
| 237 | Electromagnetic wave-absorbing behavior of soft-magnetic medium entropy alloys with BCC/L21 coherent microstructure | 5.4 | 32 | Citations (PDF) |
| 238 | Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms | 4.7 | 42 | Citations (PDF) |
| 239 | Unraveling hot deformation behavior and microstructure evolution of nanolamellar TiAl/Ti3Al composites | 3.8 | 16 | Citations (PDF) |
| 240 | Effects of modulation layer thickness on fracture toughness of a TiN/AlN-Ni multilayer film | 5.4 | 23 | Citations (PDF) |
| 241 | Mechanical behaviors of equiatomic and near-equiatomic face-centered-cubic phase high-entropy alloys probed using in situ neutron diffraction | 10.9 | 72 | Citations (PDF) |
| 242 | High strength and ductility in partially recrystallized Fe40Mn20Cr20Ni20 high-entropy alloys at cryogenic temperature 2022, 2, 15 | | 17 | Citations (PDF) |
| 243 | A low-density high-entropy dual-phase alloy with hierarchical structure and exceptional specific yield strength | 5.1 | 58 | Citations (PDF) |
| 244 | Mn content optimum on microstructures and mechanical behavior of Fe-based medium entropy alloys | 5.4 | 14 | Citations (PDF) |
| 245 | Mechanical behavior and shear band of a powder-metallurgy-fabricated CoCrFeMnNi high-entropy alloy during high strain-rate deformation | 4.9 | 40 | Citations (PDF) |
| 246 | Hierarchical multiscale crystal plasticity framework for plasticity and strain hardening of multi-principal element alloys | 4.7 | 40 | Citations (PDF) |
| 247 | Coupling precipitation strengthening and transformation induced plasticity to produce a superior combination of strength and ductility in a high entropy alloy | 4.9 | 18 | Citations (PDF) |
| 248 | Defeating hydrogen-induced grain-boundary embrittlement via triggering unusual interfacial segregation in FeCrCoNi-type high-entropy alloys | 7.6 | 68 | Citations (PDF) |
| 249 | Fatigue Behavior and Mechanisms of High-Entropy Alloys | 2.1 | 13 | Citations (PDF) |
| 250 | Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment | 5.4 | 22 | Citations (PDF) |
| 251 | Effect of nanoindentation experimental parameters on the estimation of the plastic events in metallic glasses employing various analysis methods | 3.8 | 6 | Citations (PDF) |
| 252 | Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects | 10.8 | 94 | Citations (PDF) |
| 253 | Cryogenic-Mechanical Properties and Applications of Multiple-Basis-Element Alloys | 1.8 | 36 | Citations (PDF) |
| 254 | Enhancement of Strength and Plasticity by Nanoprecipitation Strengthening and Stacking Fault Deformation in a High Entropy Alloy | 2.1 | 5 | Citations (PDF) |
| 255 | Recent progress in oxidation behavior of high-entropy alloys: A review | 2.8 | 82 | Citations (PDF) |
| 256 | Microstructures and Properties of High‐Entropy Materials: Modeling, Simulation, and Experiments | 2.2 | 51 | Citations (PDF) |
| 257 | High-throughput simulation combined machine learning search for optimum elemental composition in medium entropy alloy | 12.3 | 116 | Citations (PDF) |
| 258 | Phase stability and mechanical properties of wire + arc additively manufactured H13 tool steel at elevated temperatures | 12.3 | 75 | Citations (PDF) |
| 259 | Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy | 12.3 | 165 | Citations (PDF) |
| 260 | Nondestructive effect of the cusp magnetic field on the dendritic microstructure during the directional solidification of Nickel-based single crystal superalloy | 12.3 | 22 | Citations (PDF) |
| 261 | Coherent precipitation and stability of cuboidal nanoparticles in body-centered-cubic Al0.4Nb0.5Ta0.5TiZr0.8 refractory high entropy alloy | 4.3 | 110 | Citations (PDF) |
| 262 | Phase equilibria of the Cu-Zr-Ti ternary system at 703 °C and the thermodynamic assessment and metallic glass region prediction of the Cu-Zr-Ti ternary system | 2.6 | 16 | Citations (PDF) |
| 263 | Mechanical behaviors and precipitation transformation of the lightweight high-Zn-content Al–Zn–Li–Mg–Cu alloy | 5.4 | 70 | Citations (PDF) |
| 264 | Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys | 4.9 | 304 | Citations (PDF) |
| 265 | Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 625 | 12.3 | 111 | Citations (PDF) |
| 266 | Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys | 5.4 | 61 | Citations (PDF) |
| 267 | Competitive relationship during fatigue-crack initiation of friction-stir-welded Al alloy | 5.4 | 7 | Citations (PDF) |
| 268 | Entropy-induced transition on grain-boundary migration in multi-principal element alloys | 4.3 | 45 | Citations (PDF) |
| 269 | Chemical-Affinity Disparity and Exclusivity Drive Atomic Segregation, Short-Range Ordering, and Cluster Formation in High-Entropy Alloys | 7.6 | 111 | Citations (PDF) |
| 270 | Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates | 4.9 | 12 | Citations (PDF) |
| 271 | In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions | 5.4 | 20 | Citations (PDF) |
| 272 | Ultrafine shape memory alloys synthesized using a metastable metallic glass precursor with polymorphic crystallization | 2.5 | 4 | Citations (PDF) |
| 273 | Development of Precipitation-Strengthened Al0.8NbTiVM (M = Co, Ni) Light-Weight Refractory High-Entropy Alloys | 2.1 | 33 | Citations (PDF) |
| 274 | Hardening behaviour in the irradiated high entropy alloy | 2.8 | 34 | Citations (PDF) |
| 275 | Al0.3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties | 4.9 | 203 | Citations (PDF) |
| 276 | Deformation mechanisms in hexagonal close-packed high-entropy alloys | 1.6 | 14 | Citations (PDF) |
| 277 | Structure design and property of multiple-basis-element (MBE) alloys flexible films | 6.7 | 5 | Citations (PDF) |
| 278 | Micromechanical origin of the enhanced ductility in twinless duplex Mg–Li alloy | 5.4 | 29 | Citations (PDF) |
| 279 | Silicon-content-dependent microstructures and mechanical behavior of (AlCrTiZrMo)-Six-N high-entropy alloy nitride films | 5.4 | 38 | Citations (PDF) |
| 280 | Mechanical behavior of high-entropy alloys | 32.4 | 1,239 | Citations (PDF) |
| 281 | Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy | 10.8 | 228 | Citations (PDF) |
| 282 | Remarkable strength of a non-equiatomic Co29Cr29Fe29Ni12.5W0.5 high-entropy alloy at cryogenic temperatures | 5.4 | 25 | Citations (PDF) |
| 283 | Structure prediction in high-entropy alloys with machine learning | 2.3 | 45 | Citations (PDF) |
| 284 | High-throughput design of high-performance lightweight high-entropy alloys | 10.8 | 314 | Citations (PDF) |
| 285 | On temperature and strain-rate dependence of flow serration in HfNbTaTiZr high-entropy alloy | 4.3 | 38 | Citations (PDF) |
| 286 | Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study | 3.2 | 49 | Citations (PDF) |
| 287 | Simultaneously enhancing the ultimate strength and ductility of high-entropy alloys via short-range ordering | 10.8 | 339 | Citations (PDF) |
| 288 | Effects of process parameters on bead shape, microstructure, and mechanical properties in wire + arc additive manufacturing of Al0.1CoCrFeNi high-entropy alloy | 5.1 | 73 | Citations (PDF) |
| 289 | Unraveling the discontinuous plastic flow of a Co-Cr-Fe-Ni-Mo multiprincipal-element alloy at deep cryogenic temperatures | 1.8 | 21 | Citations (PDF) |
| 290 | Cyclic deformation and fatigue behavior of 7075-T651 Al alloy with a gradient structure | 5.4 | 17 | Citations (PDF) |
| 291 | Additive Manufacturing of High-Entropy Alloys: Microstructural Metastability and Mechanical Behavior | 1.1 | 45 | Citations (PDF) |
| 292 | Strength can be controlled by edge dislocations in refractory high-entropy alloys | 10.8 | 221 | Citations (PDF) |
| 293 | Materials Fingerprinting Classification | 2.8 | 13 | Citations (PDF) |
| 294 | Microstructure and compression properties of a dual-phase FeCoCrMn high-entropy alloy | 11.7 | 23 | Citations (PDF) |
| 295 | Temperature-dependent mechanical behavior of an Al0.5Cr0.9FeNi2.5V0.2 high-entropy alloy | 2.3 | 21 | Citations (PDF) |
| 296 | Deformation behavior of a Co-Cr-Fe-Ni-Mo medium-entropy alloy at extremely low temperatures | 12.6 | 133 | Citations (PDF) |
| 297 | Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing | 2.6 | 15 | Citations (PDF) |
| 298 | The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy | 10.9 | 83 | Citations (PDF) |
| 299 | Structural and magnetic transitions of CoFeMnNiAl high-entropy alloys caused by composition and annealing | 3.8 | 15 | Citations (PDF) |
| 300 | A novel ZrNbMoTaW refractory high-entropy alloy with in-situ forming heterogeneous structure | 5.4 | 147 | Citations (PDF) |
| 301 | Charge transfer effect on local lattice distortion in a HfNbTiZr high entropy alloy | 4.3 | 43 | Citations (PDF) |
| 302 | Pseudoelastic deformation in Mo-based refractory multi-principal element alloys | 7.6 | 17 | Citations (PDF) |
| 303 | Formation and properties of biocompatible Ti-based bulk metallic glasses in the Ti–Cu–Zr–Fe–Sn–Si–Ag system | 2.6 | 20 | Citations (PDF) |
| 304 | A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures | 4.3 | 320 | Citations (PDF) |
| 305 | Effects of aluminum content on thermoelectric performance of Al CoCrFeNi high-entropy alloys | 4.9 | 46 | Citations (PDF) |
| 306 | Enhanced irradiation tolerance of Fe30Cr25Ni20Co15Mn10 high-entropy alloy via nanotwin boundaries | 2.5 | 30 | Citations (PDF) |
| 307 | Investigation of phase-transformation path in TiZrHf(VNbTa)x refractory high-entropy alloys and its effect on mechanical property | 4.9 | 53 | Citations (PDF) |
| 308 | Predicting temperature-dependent ultimate strengths of body-centered-cubic (BCC) high-entropy alloys | 8.0 | 25 | Citations (PDF) |
| 309 | Nanoprecipitate‐Strengthened High‐Entropy Alloys | 7.7 | 363 | Citations (PDF) |
| 310 | Superior High‐Temperature Strength in a Supersaturated Refractory High‐Entropy Alloy | 17.5 | 272 | Citations (PDF) |
| 311 | Preparation of Bulk TiZrNbMoV and NbTiAlTaV High-Entropy Alloys by Powder Sintering | 1.8 | 37 | Citations (PDF) |
| 312 | Effect of Ion Irradiation on Surface Microstructure and Nano-Hardness of SA508-IV Reactor Pressure Vessel Steel | 1.1 | 3 | Citations (PDF) |
| 313 | Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures | 1.8 | 21 | Citations (PDF) |
| 314 | Effect of Build Height on Temperature Evolution and Thermally Induced Residual Stresses in Plasma Arc Additively Manufactured Stainless Steel | 1.7 | 13 | Citations (PDF) |
| 315 | Fiber-Matrix Interfaces in Ceramic Composites | 0.1 | 1 | Citations (PDF) |
| 316 | High-temperature materials for structural applications: New perspectives on high-entropy alloys, bulk metallic glasses, and nanomaterials | 3.5 | 43 | Citations (PDF) |
| 317 | Microstructural stability of Ta minor-alloying HR3C stainless steel at 973 K | 3.7 | 5 | Citations (PDF) |
| 318 | Complexity analysis of serrated flows in a bulk metallic glass under constrained and unconstrained conditions | 5.4 | 33 | Citations (PDF) |
| 319 | Evolution of the mechanical properties of a cobalt-based alloy under thermal shocks | 5.4 | 14 | Citations (PDF) |
| 320 | Amino-functionalization on graphene oxide sheets using an atomic layer amidation technique | 3.6 | 8 | Citations (PDF) |
| 321 | Effects of crystallization on mechanical behavior and corrosion performance of a ductile Zr68Al8Ni8Cu16 bulk metallic glass | 2.6 | 40 | Citations (PDF) |
| 322 | An as-cast high-entropy alloy with remarkable mechanical properties strengthened by nanometer precipitates | 3.6 | 83 | Citations (PDF) |
| 323 | Effects of Cu and Zn on microstructures and mechanical behavior of the medium-entropy aluminum alloy | 4.9 | 58 | Citations (PDF) |
| 324 | Build orientation, surface roughness, and scan path influence on the microstructure, mechanical properties, and flexural fatigue behavior of Ti–6Al–4V fabricated by electron beam melting | 5.4 | 62 | Citations (PDF) |
| 325 | Enhancement of fatigue resistance by overload-induced deformation twinning in a CoCrFeMnNi high-entropy alloy | 7.6 | 61 | Citations (PDF) |
| 326 | Void-shape dependent hardening model in irradiated face-centered-cubic metals | 2.5 | 7 | Citations (PDF) |
| 327 | Atomistic simulations of the face-centered-cubic-to-hexagonal-close-packed phase transformation in the equiatomic CoCrFeMnNi high entropy alloy under high compression | 2.6 | 55 | Citations (PDF) |
| 328 | Effects of Surface Severe Plastic Deformation on the Mechanical Behavior of 304 Stainless Steel | 1.8 | 29 | Citations (PDF) |
| 329 | The interactions between multiple arbitrarily orientated inhomogeneities with thermo-porous eigenstrains and its applications in geothermal resources | 3.0 | 7 | Citations (PDF) |
| 330 | Dual-phase synergetic precipitation in Nb/Ta/Zr co-modified Fe–Cr–Al–Mo alloy | 3.8 | 28 | Citations (PDF) |
| 331 | Unraveling the dislocation–precipitate interactions in high-entropy alloys | 10.9 | 153 | Citations (PDF) |
| 332 | Wear Properties of Sc-Bearing Zr-Based Composite BMG with Nano-CuZr2 under Lubrication | 1.6 | 1 | Citations (PDF) |
| 333 | Cluster-formula-embedded machine learning for design of multicomponent β-Ti alloys with low Young’s modulus | 8.0 | 74 | Citations (PDF) |
| 334 | High-Throughput Calculations for High-Entropy Alloys: A Brief Review | 2.0 | 115 | Citations (PDF) |
| 335 | High-throughput synthesis and corrosion behavior of sputter-deposited nanocrystalline Al (CoCrFeNi)100- combinatorial high-entropy alloys | 5.4 | 137 | Citations (PDF) |
| 336 | Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy | 17.5 | 294 | Citations (PDF) |
| 337 | Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys | 12.6 | 462 | Citations (PDF) |
| 338 | Hot deformation behavior and processing maps of an equiatomic MoNbHfZrTi refractory high entropy alloy | 3.8 | 110 | Citations (PDF) |
| 339 | Predicting the optimum compositions of high-performance Cu–Zn alloysviamachine learning | 1.9 | 15 | Citations (PDF) |
| 340 | A Review of the Serrated-Flow Phenomenon and Its Role in the Deformation Behavior of High-Entropy Alloys | 1.8 | 114 | Citations (PDF) |
| 341 | Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy | 8.1 | 230 | Citations (PDF) |
| 342 | Lattice-distortion dependent yield strength in high entropy alloys | 5.4 | 172 | Citations (PDF) |
| 343 | Microstructural origins of mechanical and electrochemical heterogeneities of friction stir welded heat-treatable aluminum alloy | 1.5 | 12 | Citations (PDF) |
| 344 | Discovery and design of fatigue-resistant high-entropy alloys | 4.3 | 103 | Citations (PDF) |
| 345 | An unified model for dislocations interacting with complex-shape voids in irradiated metals | 8.2 | 15 | Citations (PDF) |
| 346 | Probing deformation mechanisms of gradient nanostructured CrCoNi medium entropy alloy | 12.3 | 54 | Citations (PDF) |
| 347 | Fine-grain-embedded dislocation-cell structures for high strength and ductility in additively manufactured steels | 5.4 | 55 | Citations (PDF) |
| 348 | A biocompatible Pd-based BMG with excellent corrosive-wear resistance for implant applications | 3.8 | 17 | Citations (PDF) |
| 349 | Promising properties and future trend of eutectic high entropy alloys | 4.3 | 564 | Citations (PDF) |
| 350 | Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy | 3.8 | 170 | Citations (PDF) |
| 351 | Fundamental electronic structure and multiatomic bonding in 13 biocompatible high-entropy alloys | 8.0 | 109 | Citations (PDF) |
| 352 | Mechanical and Magnetic Properties of the High-Entropy Alloys for Combinatorial Approaches | 1.8 | 40 | Citations (PDF) |
| 353 | Effect of temperature on small-scale deformation of individual face-centered-cubic and body-centered-cubic phases of an Al0.7CoCrFeNi high-entropy alloy | 5.4 | 35 | Citations (PDF) |
| 354 | Diffusion Barrier Performance of AlCrTaTiZr/AlCrTaTiZr-N High-Entropy Alloy Films for Cu/Si Connect System | 1.2 | 36 | Citations (PDF) |
| 355 | In-situ visualization of corrosion behavior of Al CoCrFeNi high-entropy alloys during electrochemical polarization | 4.9 | 82 | Citations (PDF) |
| 356 | Relation Between the Defect Interactions and the Serration Dynamics in a Zr-Based Bulk Metallic Glass | 1.6 | 13 | Citations (PDF) |
| 357 | Effects of C/Si ratios on structures and behaviors of NbSiCN nanocomposite films synthesized by reactive magnetron sputtering | 4.2 | 5 | Citations (PDF) |
| 358 | The oxidation effect on the cracking behavior of a Co-based alloy under thermal shocks | 7.2 | 20 | Citations (PDF) |
| 359 | A multi-phase CrMnFeCoNiAl0.75 high-entropy alloy with high strength at intermediate temperature | 3.8 | 52 | Citations (PDF) |
| 360 | Effects of temperature and strain rate on plastic deformation mechanisms of nanocrystalline high-entropy alloys | 3.8 | 70 | Citations (PDF) |
| 361 | Preternatural Hexagonal High-Entropy Alloys: A Review | 2.7 | 55 | Citations (PDF) |
| 362 | Tensile creep behavior of an equiatomic CoCrNi medium entropy alloy | 3.8 | 44 | Citations (PDF) |
| 363 | Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films | 4.9 | 58 | Citations (PDF) |
| 364 | Deformation behavior of annealed Cu64Zr36 metallic glass via molecular dynamics simulations | 5.4 | 27 | Citations (PDF) |
| 365 | Microstructure evolution and deformation mechanism of amorphous/crystalline high-entropy-alloy composites | 12.3 | 63 | Citations (PDF) |
| 366 | Corrosive wear behaviors and mechanisms of a biocompatible Fe-based bulk metallic glass | 2.6 | 27 | Citations (PDF) |
| 367 | Performance and local structure evolution of NbMoTaWV entropy-stabilized oxide thin films with variable oxygen content | 4.8 | 18 | Citations (PDF) |
| 368 | Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys | 1.8 | 18 | Citations (PDF) |
| 369 | A novel face-centered-cubic high-entropy alloy strengthened by nanoscale precipitates | 4.3 | 95 | Citations (PDF) |
| 370 | Portevin-Le Chatelier mechanism in face-centered-cubic metallic alloys from low to high entropy | 10.9 | 85 | Citations (PDF) |
| 371 | Phase transformation assisted twinning in a face-centered-cubic FeCrNiCoAl high entropy alloy | 7.6 | 60 | Citations (PDF) |
| 372 | Applications of High-Pressure Technology for High-Entropy Alloys: A Review | 1.8 | 32 | Citations (PDF) |
| 373 | First-principles and machine learning predictions of elasticity in severely lattice-distorted high-entropy alloys with experimental validation | 7.6 | 190 | Citations (PDF) |
| 374 | Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae | 10.8 | 901 | Citations (PDF) |
| 375 | Investigation of chaos and memory effects in the Bonhoeffer-van der Pol oscillator with a non-ideal capacitor | 2.7 | 9 | Citations (PDF) |
| 376 | Tuning the mechanical behavior of high-entropy alloys via controlling cooling rates | 5.4 | 63 | Citations (PDF) |
| 377 | Ultrafine-grained dual phase Al0.45CoCrFeNi high-entropy alloys | 5.4 | 93 | Citations (PDF) |
| 378 | Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy | 4.9 | 232 | Citations (PDF) |
| 379 | Influence of Ta/Zr minor-alloying on the high-temperature microstructural stability of cladding Fe–Cr–Al ferritic stainless steels | 2.5 | 29 | Citations (PDF) |
| 380 | Recent Topics on the Structure and Crystallization of Al-based Glassy Alloys | 0.7 | 22 | Citations (PDF) |
| 381 | Exploration of phase structure evolution induced by alloying elements in Ti alloys via a chemical-short-range-order cluster model | 2.7 | 28 | Citations (PDF) |
| 382 | Entropy modeling on serrated flows in carburized steels | 5.4 | 24 | Citations (PDF) |
| 383 | Incredible improvement in fatigue resistance of friction stir welded 7075-T651 aluminum alloy via surface mechanical rolling treatment | 5.2 | 60 | Citations (PDF) |
| 384 | From symmetry to entropy: Crystal entropy difference strongly affects early stage phase transformation | 2.3 | 11 | Citations (PDF) |
| 385 | A statistical theory of probability-dependent precipitation strengthening in metals and alloys | 4.7 | 107 | Citations (PDF) |
| 386 | Interplay between microstructure and deformation behavior of a laser-welded CoCrFeNi high entropy alloy | 1.5 | 17 | Citations (PDF) |
| 387 | Design of near-α Ti alloys via a cluster formula approach and their high-temperature oxidation resistance | 12.3 | 42 | Citations (PDF) |
| 388 | Experimental and numerical studies on strength and ductility of gradient-structured iron plate obtained by surface mechanical-attrition treatment | 5.4 | 20 | Citations (PDF) |
| 389 | Origin of serrated flow in bulk metallic glasses | 4.7 | 41 | Citations (PDF) |
| 390 | Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility | 5.4 | 70 | Citations (PDF) |
| 391 | Formation, reverse transformation, and properties of ε-martensite phase in the CoCrFeMnNi high-entropy alloy under high-pressure | 4.9 | 32 | Citations (PDF) |
| 392 | Effects of Silicon Content on the Microstructures and Mechanical Properties of (AlCrTiZrV)-Six-N High-Entropy Alloy Films | 1.2 | 12 | Citations (PDF) |
| 393 | The superior hydrogen-generation performance of multi-component Al alloys by the hydrolysis reaction | 6.6 | 92 | Citations (PDF) |
| 394 | The elastic-strain energy criterion of phase formation for complex concentrated alloys | 1.9 | 43 | Citations (PDF) |
| 395 | Pressure-induced phase transition in the AlCoCrFeNi high-entropy alloy | 4.3 | 48 | Citations (PDF) |
| 396 | Probing the phase transformation and dislocation evolution in dual-phase high-entropy alloys | 10.9 | 323 | Citations (PDF) |
| 397 | Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments | 4.3 | 46 | Citations (PDF) |
| 398 | Microstructure and shape memory effect of laser welded Nitinol wires | 1.8 | 11 | Citations (PDF) |
| 399 | Formation of cuboidal B2 nanoprecipitates and microstructural evolution in the body-centered-cubic Al0.7NiCoFe1.5Cr1.5 high-entropy alloy | 4.9 | 43 | Citations (PDF) |
| 400 | A closed-form solution for the horizontally aligned thermal-porous spheroidal inclusion in a half-space and its applications in geothermal reservoirs | 3.0 | 10 | Citations (PDF) |
| 401 | A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing | 5.2 | 210 | Citations (PDF) |
| 402 | Microstructure Stability and Its Influence on the Mechanical Properties of CrMnFeCoNiAl0.25 High Entropy Alloy | 2.5 | 26 | Citations (PDF) |
| 403 | Microstructures and properties of high-entropy alloy films and coatings: a review | 8.7 | 565 | Citations (PDF) |
| 404 | Understanding the structure-Poisson’s ratio relation in bulk metallic glass | 2.8 | 14 | Citations (PDF) |
| 405 | The effects of phase transformation on the microstructure and mechanical behavior of FeNiMnCr.75Al high-entropy alloys | 5.4 | 23 | Citations (PDF) |
| 406 | Nanoscale serration and creep characteristics of Al0.5CoCrCuFeNi high-entropy alloys | 4.9 | 86 | Citations (PDF) |
| 407 | Homogenization of Al CoCrFeNi high-entropy alloys with improved corrosion resistance | 7.2 | 469 | Citations (PDF) |
| 408 | Improvement in creep life of a nickel-based single-crystal superalloy via composition homogeneity on the multiscales by magnetic-field-assisted directional solidification | 2.7 | 24 | Citations (PDF) |
| 409 | Science and technology in high-entropy alloys | 5.1 | 1,085 | Citations (PDF) |
| 410 | Effects of similar-element-substitution on the glass-forming ability and mechanical behaviors of Ti-Cu-Zr-Pd bulk metallic glasses | 4.9 | 10 | Citations (PDF) |
| 411 | Numerical simulation on the deformation behaviors of bulk metallic glass composites under uniaxial tension and compression | 5.5 | 31 | Citations (PDF) |
| 412 | In-situ electrochemical-AFM study of localized corrosion of Al CoCrFeNi high-entropy alloys in chloride solution | 5.1 | 244 | Citations (PDF) |
| 413 | Phase stability and transformation in a light-weight high-entropy alloy | 7.6 | 207 | Citations (PDF) |
| 414 | Equilibrium high entropy alloy phase stability from experiments and thermodynamic modeling | 4.3 | 118 | Citations (PDF) |
| 415 | Chemical short-range orders and the induced structural transition in high-entropy alloys | 4.3 | 148 | Citations (PDF) |
| 416 | Temperature effects on the serrated behavior of an Al0.5CoCrCuFeNi high-entropy alloy | 3.7 | 69 | Citations (PDF) |
| 417 | Microstructural characterization and strengthening mechanism of AlN/Y nanocomposite and nanomultilayered films | 4.9 | 6 | Citations (PDF) |
| 418 | Improvement of mechanical behaviors of a superlight Mg-Li base alloy by duplex phases and fine precipitates | 4.9 | 109 | Citations (PDF) |
| 419 | Coherent Precipitation and Strengthening in Compositionally Complex Alloys: A Review | 1.2 | 209 | Citations (PDF) |
| 420 | A Novel Low-Activation VCrFeTaxWx (x = 0.1, 0.2, 0.3, 0.4, and 1) High-Entropy Alloys with Excellent Heat-Softening Resistance | 1.2 | 94 | Citations (PDF) |
| 421 | Additive Manufacturing of High-Entropy Alloys: A Review | 1.2 | 246 | Citations (PDF) |
| 422 | Microstructures and mechanical properties of body-centered-cubic (Al,Ti)0.7(Ni,Co,Fe,Cr)5 high entropy alloys with coherent B2/L21 nanoprecipitation | 5.4 | 90 | Citations (PDF) |
| 423 | Dislocation avalanche mechanism in slowly compressed high entropy alloy nanopillars | 3.5 | 46 | Citations (PDF) |
| 424 | Complexity modeling and analysis of chaos and other fluctuating phenomena | 3.8 | 20 | Citations (PDF) |
| 425 | Pressure-induced ordering phase transition in high-entropy alloy | 3.8 | 13 | Citations (PDF) |
| 426 | Plasticity Enhancement by Fe-Addition on NiAl Alloy: A Synchrotron X-ray Diffraction Mapping and Molecular Dynamics Simulation Study | 0.9 | 0 | Citations (PDF) |
| 427 | Effects of Y, GdCu, and Al Addition on the Thermoelectric Behavior of CoCrFeNi High Entropy Alloys | 1.8 | 33 | Citations (PDF) |
| 428 | A Low-Cost Lightweight Entropic Alloy with High Strength | 1.1 | 68 | Citations (PDF) |
| 429 | Predictive multiphase evolution in Al-containing high-entropy alloys | 10.8 | 170 | Citations (PDF) |
| 430 | Effect of concentration on the structure of isothermally-annealed CuZr metallic glasses | 1.2 | 6 | Citations (PDF) |
| 431 | Wear behavior of Al0.6CoCrFeNi high-entropy alloys: Effect of environments | 1.9 | 121 | Citations (PDF) |
| 432 | Shear localization of fcc high-entropy alloys | 0.2 | 9 | Citations (PDF) |
| 433 | Lattice distortion in a strong and ductile refractory high-entropy alloy | 7.6 | 612 | Citations (PDF) |
| 434 | Fracture resistance of high entropy alloys: A review | 3.8 | 229 | Citations (PDF) |
| 435 | Vanishing of room-temperature slip avalanches in a face-centered-cubic high-entropy alloy by ultrafine grain formation | 4.3 | 15 | Citations (PDF) |
| 436 | Fatigue and fracture behavior of bulk metallic glasses and their composites | 32.4 | 117 | Citations (PDF) |
| 437 | Effect of strain rate and temperature on the serration behavior of SA508-III RPV steel in the dynamic strain aging process | 2.1 | 6 | Citations (PDF) |
| 438 | Microstructure and enhanced mechanical behavior of the Al7Co24Cr21Fe24Ni24 high-entropy alloy system by tuning the Cr content | 5.4 | 53 | Citations (PDF) |
| 439 | Effect of Ti substitution for Al on the cuboidal nanoprecipitates in Al0.7NiCoFeCr2 high-entropy alloys | 1.9 | 18 | Citations (PDF) |
| 440 | Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L21 ratio in composite nano-precipitates | 7.6 | 123 | Citations (PDF) |
| 441 | Tribological behaviors of a Ni-free Ti-based bulk metallic glass in air and a simulated physiological environment | 4.9 | 31 | Citations (PDF) |
| 442 | Effects of Nb/Ti/V/Ta on phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic stainless steels | 4.2 | 73 | Citations (PDF) |
| 443 | Creep, fatigue, and fracture behavior of high-entropy alloys | 1.9 | 59 | Citations (PDF) |
| 444 | Effect of Nb content on thermal stability, mechanical and corrosion behaviors of hypoeutectic CoCrFeNiNbχ high-entropy alloys | 1.9 | 57 | Citations (PDF) |
| 445 | Fundamental understanding of mechanical behavior of high-entropy alloys at low temperatures: A review | 1.9 | 98 | Citations (PDF) |
| 446 | Effects of heat treatment on the mechanical properties and corrosion behaviour of the Mg-2Zn-0.2Mn-xNd alloys | 4.9 | 32 | Citations (PDF) |
| 447 | Novel high entropy alloys of FexCo1-xNiMnGa with excellent soft magnetic properties | 3.8 | 104 | Citations (PDF) |
| 448 | Graded microstructures of Al-Li-Mg-Zn-Cu entropic alloys under supergravity | 5.1 | 41 | Citations (PDF) |
| 449 | Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures | 5.1 | 228 | Citations (PDF) |
| 450 | Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus | 5.4 | 86 | Citations (PDF) |
| 451 | Microstructural evolution of single Ni2TiAl or hierarchical NiAl/Ni2TiAl precipitates in Fe-Ni-Al-Cr-Ti ferritic alloys during thermal treatment for elevated-temperature applications | 7.6 | 89 | Citations (PDF) |
| 452 | Cuckoo searching optimal composition of multicomponent alloys by molecular simulations | 4.3 | 24 | Citations (PDF) |
| 453 | Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior | 7.2 | 876 | Citations (PDF) |
| 454 | Seeing the unseen: uncover the bulk heterogeneous deformation processes in metallic glasses through surface temperature decoding | 12.6 | 13 | Citations (PDF) |
| 455 | Tailoring magnetic behavior of CoFeMnNiX (X = Al, Cr, Ga, and Sn) high entropy alloys by metal doping | 7.6 | 329 | Citations (PDF) |
| 456 | High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure | 2.7 | 156 | Citations (PDF) |
| 457 | Plasticity performance of Al0.5 CoCrCuFeNi high-entropy alloys under nanoindentation | 2.1 | 9 | Citations (PDF) |
| 458 | Non-linear behavior in advanced materials | 2.1 | 0 | Citations (PDF) |
| 459 | Transition of Temporal Scaling Behavior in Percolation Assisted Shear-branching Structure during Plastic Deformation | 2.7 | 7 | Citations (PDF) |
| 460 | Microstructure and a coherent-interface strengthening mechanism of NbSiN nanocomposite film | 1.6 | 8 | Citations (PDF) |
| 461 | Primary and secondary precipitates in a hierarchical-precipitate-strengthened ferritic alloy | 4.9 | 17 | Citations (PDF) |
| 462 | Influence of thin-film metallic glass coating on fatigue behavior of bulk metallic glass: Experiments and finite element modeling | 5.4 | 25 | Citations (PDF) |
| 463 | Deformation mechanisms of Al0.1CoCrFeNi at elevated temperatures | 5.4 | 72 | Citations (PDF) |
| 464 | Strengthening in Al0.25CoCrFeNi high-entropy alloys by cold rolling | 5.4 | 166 | Citations (PDF) |
| 465 | Slip avalanche in nanoscratching of metallic glasses | 1.6 | 3 | Citations (PDF) |
| 466 | Linking macroscopic rejuvenation to nano-elastic fluctuations in a metallic glass | 7.6 | 108 | Citations (PDF) |
| 467 | Crystallization kinetics in AlxCrCoFeNi (0 ≤ x ≤ 40) high-entropy alloys | 4.3 | 62 | Citations (PDF) |
| 468 | Microstructures, mechanical behavior and strengthening mechanism of TiSiCN nanocomposite films | 2.7 | 24 | Citations (PDF) |
| 469 | Serration and noise behaviors in materials | 32.4 | 291 | Citations (PDF) |
| 470 | Surface Mechanoengineering of a Zr-Based Bulk Metallic Glass via Ar-Nanobubble Doping To Probe Cell Sensitivity to Rigid Materials | 5.5 | 9 | Citations (PDF) |
| 471 | Effect of annealing on nanoindentation slips in a bulk metallic glass | 2.4 | 16 | Citations (PDF) |
| 472 | High Temperature Deformation Mechanism in Hierarchical and Single Precipitate Strengthened Ferritic Alloys by In Situ Neutron Diffraction Studies | 2.7 | 27 | Citations (PDF) |
| 473 | Martensitic transformation in a B2-containing CuZr-based BMG composite revealed by in situ neutron diffraction | 4.9 | 21 | Citations (PDF) |
| 474 | High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures | 7.6 | 528 | Citations (PDF) |
| 475 | Three-point-bending fatigue behavior of AZ31B magnesium alloy based on infrared thermography technology | 5.2 | 26 | Citations (PDF) |
| 476 | Microstructural characteristics of a Ni2TiAl-precipitate-strengthened ferritic alloy | 4.9 | 39 | Citations (PDF) |
| 477 | Cooling-rate induced softening in a colloidal glass | 2.7 | 3 | Citations (PDF) |
| 478 | Plastic dynamics of the Al0.5CoCrCuFeNi high entropy alloy at cryogenic temperatures: Jerky flow, stair-like fluctuation, scaling behavior, and non-chaotic state | 2.3 | 31 | Citations (PDF) |
| 479 | First-principles prediction of high-entropy-alloy stability | 8.0 | 171 | Citations (PDF) |
| 480 | Effect of Heavy Ion Irradiation Dosage on the Hardness of SA508-IV Reactor Pressure Vessel Steel | 1.8 | 15 | Citations (PDF) |
| 481 | The BCC/B2 Morphologies in AlxNiCoFeCr High-Entropy Alloys | 1.8 | 169 | Citations (PDF) |
| 482 | Corrosion-Resistant High-Entropy Alloys: A Review | 1.8 | 955 | Citations (PDF) |
| 483 | Fatigue behavior of high-entropy alloys: A review | 3.2 | 97 | Citations (PDF) |
| 484 | Design of Light-Weight High-Entropy Alloys | 1.2 | 276 | Citations (PDF) |
| 485 | Loading-rate-independent delay of catastrophic avalanches in a bulk metallic glass | 2.7 | 20 | Citations (PDF) |
| 486 | Non-monotonic changes in critical solidification rates for stability of liquid-solid interfaces with static magnetic fields | 2.7 | 7 | Citations (PDF) |
| 487 | Serration and Noise Behavior in Advanced Materials | 2.1 | 9 | Citations (PDF) |
| 488 | Corrosion fatigue behavior of a Mg-based bulk metallic glass in a simulated physiological environment | 3.8 | 26 | Citations (PDF) |
| 489 | Microstructure and small-scale size effects in plasticity of individual phases of Al0.7CoCrFeNi High Entropy alloy | 3.1 | 68 | Citations (PDF) |
| 490 | A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al0.7CoCrFe2Ni with prominent tensile properties | 4.3 | 188 | Citations (PDF) |
| 491 | Effects of elemental addition on the microstructure, thermal stability, and magnetic properties of the mechanically alloyed FeSiBAlNi high entropy alloys | 3.1 | 41 | Citations (PDF) |
| 492 | Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys | 7.6 | 68 | Citations (PDF) |
| 493 | Shear-Coupled Grain Growth and Texture Development in a Nanocrystalline Ni-Fe Alloy during Cold Rolling | 1.7 | 24 | Citations (PDF) |
| 494 | Phase stability and microstructures of high entropy alloys ion irradiated to high doses | 2.5 | 162 | Citations (PDF) |
| 495 | Self-Similar Random Process and Chaotic Behavior In Serrated Flow of High Entropy Alloys | 2.7 | 23 | Citations (PDF) |
| 496 | Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys | 5.4 | 275 | Citations (PDF) |
| 497 | Tensile deformation mechanisms of an in-situ Ti-based metallic glass matrix composite at cryogenic temperature | 2.7 | 19 | Citations (PDF) |
| 498 | Atomistic clustering-ordering and high-strain deformation of an Al0.1CrCoFeNi high-entropy alloy | 2.7 | 112 | Citations (PDF) |
| 499 | Liquid-solid joining of bulk metallic glasses | 2.7 | 9 | Citations (PDF) |
| 500 | In vitro responses of bone-forming MC3T3-E1 pre-osteoblasts to biodegradable Mg-based bulk metallic glasses | 5.8 | 34 | Citations (PDF) |
| 501 | Fatigue induced deformation and thermodynamics evolution in a nano particle strengthened nickel base superalloy | 2.3 | 13 | Citations (PDF) |
| 502 | Metallic glass matrix composites | 15.1 | 523 | Citations (PDF) |
| 503 | A Brief Review of High Entropy Alloys and Serration Behavior and Flow Units | 2.1 | 59 | Citations (PDF) |
| 504 | Influence of thermo-mechanical embrittlement processing on microstructure and mechanical behavior of a pressure vessel steel | 5.4 | 15 | Citations (PDF) |
| 505 | Anomalies in the deformation mechanism and kinetics of coarse-grained high entropy alloy | 5.4 | 105 | Citations (PDF) |
| 506 | Load partitioning between the bcc-iron matrix and NiAl-type precipitates in a ferritic alloy on multiple length scales | 2.7 | 11 | Citations (PDF) |
| 507 | Scaling behavior and complexity of plastic deformation for a bulk metallic glass at cryogenic temperatures | 1.5 | 32 | Citations (PDF) |
| 508 | Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates | 2.7 | 115 | Citations (PDF) |
| 509 | Nano-sized precipitate stability and its controlling factors in a NiAl-strengthened ferritic alloy | 2.7 | 43 | Citations (PDF) |
| 510 | Universal Quake Statistics: From Compressed Nanocrystals to Earthquakes | 2.7 | 117 | Citations (PDF) |
| 511 | Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy and High-Entropy Alloys | 2.7 | 147 | Citations (PDF) |
| 512 | Structural Stabilities of β-Ti Alloys Studied Using a New Mo Equivalent Derived from [β/(α + β)] Phase-Boundary Slopes | 1.7 | 158 | Citations (PDF) |
| 513 | Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy | 3.8 | 86 | Citations (PDF) |
| 514 | β Zr–Nb–Ti–Mo–Sn alloys with low Young׳s modulus and low magnetic susceptibility optimized via a cluster-plus-glue-atom model | 5.4 | 35 | Citations (PDF) |
| 515 | Low-cycle fatigue of metallic glass nanowires | 7.6 | 46 | Citations (PDF) |
| 516 | Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy | 10.8 | 689 | Citations (PDF) |
| 517 | Surface engineering of a Zr-based bulk metallic glass with low energy Ar- or Ca-ion implantation | 5.8 | 16 | Citations (PDF) |
| 518 | Insights from the Lattice-Strain Evolution on Deformation Mechanisms in Metallic-Glass-Matrix Composites | 1.7 | 23 | Citations (PDF) |
| 519 | Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction | 7.6 | 52 | Citations (PDF) |
| 520 | A Zr-based bulk metallic glass for future stent applications: Materials properties, finite element modeling, and in vitro human vascular cell response | 6.7 | 88 | Citations (PDF) |
| 521 | Effects of annealing on the microstructure, corrosion resistance, and mechanical properties of RE65Co25Al10 (RE=Ce, La, Pr, Sm, and Gd) bulk metallic glasses | 5.4 | 5 | Citations (PDF) |
| 522 | Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling | 2.7 | 58 | Citations (PDF) |
| 523 | Magnetic Behavior of Pr55Cu13.3Ni6.7Al25 Metallic Glasses | 1.7 | 1 | Citations (PDF) |
| 524 | Friction Stir Processing of a High Entropy Alloy Al0.1CoCrFeNi | 1.4 | 119 | Citations (PDF) |
| 525 | Special Orientation Relationships of CuZr2 in the Annealed Zr64.5Cu35.5 Metallic Glass | 1.7 | 1 | Citations (PDF) |
| 526 | Effects of pre-compression on the microstructure, mechanical properties and corrosion resistance of RE65Co25Al10 (RE = Ce, La, Pr, Sm and Gd) bulk metallic glasses | 3.8 | 11 | Citations (PDF) |
| 527 | Microstructures and Stability Origins of β-(Ti,Zr)-(Mo,Sn)-Nb Alloys with Low Young’s Modulus | 1.7 | 20 | Citations (PDF) |
| 528 | Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy | 7.6 | 451 | Citations (PDF) |
| 529 | Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys | 1.4 | 166 | Citations (PDF) |
| 530 | Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization | 5.4 | 296 | Citations (PDF) |
| 531 | Equation of State of an AlCoCrCuFeNi High-Entropy Alloy | 1.4 | 15 | Citations (PDF) |
| 532 | Stress induced atomic-scale damage and relaxation in bulk metallic glasses | 4.9 | 8 | Citations (PDF) |
| 533 | Effects of Temperature on Serrated Flows of Al0.5CoCrCuFeNi High-Entropy Alloy | 1.4 | 58 | Citations (PDF) |
| 534 | In vitro investigation of Mg–Zn–Ca–Ag bulk metallic glasses for biomedical applications | 2.6 | 40 | Citations (PDF) |
| 535 | Local Structures of High-Entropy Alloys (HEAs) on Atomic Scales: An Overview | 1.4 | 47 | Citations (PDF) |
| 536 | Biodegradable Mg–Zn–Ca–Sr bulk metallic glasses with enhanced corrosion performance for biomedical applications | 4.7 | 166 | Citations (PDF) |
| 537 | Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures | 7.6 | 76 | Citations (PDF) |
| 538 | TWO-DIMENSIONAL X-RAY DIFFRACTION TO INVESTIGATE γ/γ' LATTICE MISFITS IN DIFFERENT PREPARATIONS OF SINGLE-CRYSTAL NICKEL-BASED SUPERALLOY DD483 | 0.4 | 1 | Citations (PDF) |
| 539 | Superelasticity and Serration Behavior in Small‐Sized NiMnGa Alloys | 2.2 | 45 | Citations (PDF) |
| 540 | Guidelines in predicting phase formation of high-entropy alloys | 1.6 | 389 | Citations (PDF) |
| 541 | Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys | 1.2 | 231 | Citations (PDF) |
| 542 | Microstructures and Crackling Noise of AlxNbTiMoV High Entropy Alloys | 1.2 | 185 | Citations (PDF) |
| 543 | Antimicrobial behavior of Cu-bearing Zr-based bulk metallic glasses | 5.8 | 34 | Citations (PDF) |
| 544 | One-step formation and photocatalytic performance of spindle-like TiO2 nanorods synthesized by dealloying amorphous Cu50Ti50 alloy | 7.2 | 23 | Citations (PDF) |
| 545 | Enhancing the bio-corrosion resistance of Ni-free ZrCuFeAl bulk metallic glass through nitrogen plasma immersion ion implantation | 4.9 | 15 | Citations (PDF) |
| 546 | Microstructures and properties of high-entropy alloys | 32.4 | 6,975 | Citations (PDF) |
| 547 | Investigation of deformation dynamics in a wrought magnesium alloy | 10.9 | 78 | Citations (PDF) |
| 548 | Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs) | 1.4 | 91 | Citations (PDF) |
| 549 | Thin-film metallic glasses for substrate fatigue-property improvements | 1.6 | 96 | Citations (PDF) |
| 550 | Evaluation of Ni-free Zr–Cu–Fe–Al bulk metallic glass for biomedical implant applications | 4.9 | 23 | Citations (PDF) |
| 551 | Understanding the Cu-Zn brass alloys using a short-range-order cluster model: significance of specific compositions of industrial alloys | 2.7 | 97 | Citations (PDF) |
| 552 | Serration Dynamics in a Zr-Based Bulk Metallic Glass | 1.7 | 21 | Citations (PDF) |
| 553 | Microsegregation in and Phase Stability of As-Cast Ti-Zr-Hf-Ni-Pd-Pt High-Entropy Alloys | 1.7 | 6 | Citations (PDF) |
| 554 | Dynamic Stress–Strain Behavior in ZrTiCuNiAl Noncrystalline Alloys Pretreated Under High Pressures | 1.7 | 0 | Citations (PDF) |
| 555 | Microyielding of Core-Shell Crystal Dendrites in a Bulk-metallic-glass Matrix Composite | 2.7 | 17 | Citations (PDF) |
| 556 | Tuned Critical Avalanche Scaling in Bulk Metallic Glasses | 2.7 | 137 | Citations (PDF) |
| 557 | Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy | 1.7 | 118 | Citations (PDF) |
| 558 | Nature of the interfaces between the constituent phases in the high entropy alloy CoCrCuFeNiAl | 1.7 | 103 | Citations (PDF) |
| 559 | Processing effects on the magnetic and mechanical properties of FeCoNiAl0.2Si0.2 high entropy alloy | 5.6 | 106 | Citations (PDF) |
| 560 | Mechanical properties of the high-entropy alloy Ag0.5CoCrCuFeNi at temperatures of 4.2–300 K | 0.4 | 80 | Citations (PDF) |
| 561 | A Successful Synthesis of the CoCrFeNiAl0.3 Single-Crystal, High-Entropy Alloy by Bridgman Solidification | 1.4 | 116 | Citations (PDF) |
| 562 | Fatigue-Induced Damage in Zr-Based Bulk Metallic Glasses | 2.7 | 15 | Citations (PDF) |
| 563 | Fatigue deformation of microsized metallic glasses | 4.3 | 37 | Citations (PDF) |
| 564 | Novel low Cu content and Ni-free Zr-based bulk metallic glasses for biomedical applications | 2.6 | 30 | Citations (PDF) |
| 565 | Deformation dynamics study of a wrought magnesium alloy by real-time in situ neutron diffraction | 4.3 | 39 | Citations (PDF) |
| 566 | Uncommon Deformation Mechanisms during Fatigue-Crack Propagation in Nanocrystalline Alloys | 5.8 | 8 | Citations (PDF) |
| 567 | High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability | 2.7 | 566 | Citations (PDF) |
| 568 | Modeling size effects on fatigue life of a zirconium-based bulk metallic glass under bending | 7.6 | 11 | Citations (PDF) |
| 569 | A study on the surface structures and properties of Ni-free Zr-based bulk metallic glasses after Ar and Ca ion implantation | 3.8 | 16 | Citations (PDF) |
| 570 | A Tensile Deformation Model for In-situ Dendrite/Metallic Glass Matrix Composites | 2.7 | 82 | Citations (PDF) |
| 571 | ANSYS-Based Simulation and Optimization on Temperature Field of Amorphous Ingot Made by Water Quenching | 1.7 | 3 | Citations (PDF) |
| 572 | The Effect of Er Addition on the Air-Oxidation of a Zr55Cu30Al10Ni5-Based Bulk Metallic Glass | 1.0 | 5 | Citations (PDF) |
| 573 | Tensile Mechanical Behaviors of In Situ Metallic Glass Matrix Composites at Ambient Temperature and in Supercooled Liquid Region | 1.7 | 5 | Citations (PDF) |
| 574 | Tensile softening of metallic-glass-matrix composites in the supercooled liquid region | 2.3 | 44 | Citations (PDF) |
| 575 | Electronic Structure Inheritance and Pressure-Induced Polyamorphism in Lanthanide-Based Metallic Glasses | 5.8 | 91 | Citations (PDF) |
| 576 | Corrosion resistance and biocompatibility of Ni-free Zr-based bulk metallic glass for biomedical applications | 3.8 | 38 | Citations (PDF) |
| 577 | Thermographic studies of temperature evolutions in bulk metallic glasses: An overview | 3.8 | 20 | Citations (PDF) |
| 578 | Interpreting temperature evolution of a bulk-metallic glass during cyclic loading through spatial–temporal modeling | 3.8 | 4 | Citations (PDF) |
| 579 | Mechanical behaviours of workhardening and worksoftening bulk metallic glasses | 1.2 | 4 | Citations (PDF) |
| 580 | Plastic Deformation of a Nano‐Precipitate Strengthened Ni‐Base Alloy Investigated by Complementary In Situ Neutron Diffraction Measurements and Molecular‐Dynamics Simulations | 2.2 | 14 | Citations (PDF) |
| 581 | A computational study of impurity diffusivities for 5d transition metal solutes in α-Fe | 4.3 | 29 | Citations (PDF) |
| 582 | Twinning–detwinning behavior during fatigue-crack propagation in a wrought magnesium alloy AZ31B | 5.4 | 69 | Citations (PDF) |
| 583 | Effect of Al on the NiAl-Type B2 Precipitates in Ferritic Superalloys | 1.7 | 15 | Citations (PDF) |
| 584 | Structural Irreversibility and Enhanced Brittleness under Fatigue in Zr-Based Amorphous Solids | 1.8 | 5 | Citations (PDF) |
| 585 | Alloy Design and Properties Optimization of High-Entropy Alloys | 1.4 | 779 | Citations (PDF) |
| 586 | Plastic Deformation in an Amorphous Ni-P Coating | 1.7 | 15 | Citations (PDF) |
| 587 | Interface Constraints on Shear Band Patterns in Bonded Metallic Glass Films Under Microindentation | 1.7 | 25 | Citations (PDF) |
| 588 | Air-Oxidation Behavior of a [(Co50Cr15Mo14C15B6)97.5Er2.5]93Fe7 Bulk-Metallic Glass at 873 K to 973 K (600 °C to 700 °C) | 1.7 | 4 | Citations (PDF) |
| 589 | High-Energy Synchrotron X-Ray Diffraction for In Situ Study of Phase Transformation in Shape-Memory Alloys | 1.4 | 7 | Citations (PDF) |
| 590 | Bendable bulk metallic glass: Effects of a thin, adhesive, strong, and ductile coating | 7.6 | 71 | Citations (PDF) |
| 591 | Characterization of shear bands/cracks induced by fatigue experiment in a Zr–Cu–Al bulk metallic glass | 4.3 | 8 | Citations (PDF) |
| 592 | Effects of Cooling Rates on Glass Formation and Magnetic Behavior for the Fe73.0C7.0Si3.3B5.0P8.7Mo3.0 Bulk Metallic Glass | 1.7 | 7 | Citations (PDF) |
| 593 | Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study | 1.7 | 213 | Citations (PDF) |
| 594 | Effects of partial crystallization on compression and fatigue behavior of Zr-based bulk metallic glasses | 1.9 | 13 | Citations (PDF) |
| 595 | Stress-life fatigue behavior and fracture-surface morphology of a Cu-based bulk-metallic glass | 1.9 | 22 | Citations (PDF) |
| 596 | Elastic properties of Zr-based bulk metallic glasses studied by resonant ultrasound spectroscopy | 1.9 | 45 | Citations (PDF) |
| 597 | Fatigue behavior of an Fe48Cr15Mo14Er2C15B6 amorphous steel | 1.9 | 27 | Citations (PDF) |
| 598 | In situ thermographic observations on the compression behavior of a relaxed Zr-based bulk-metallic glass | 1.9 | 6 | Citations (PDF) |
| 599 | Mechanical behavior of a Zr-based bulk metallic glass and its composite at cryogenic temperatures | 1.9 | 11 | Citations (PDF) |
| 600 | Nanocrystalline coating enhanced ductility in a Zr-based bulk metallic glass | 1.9 | 22 | Citations (PDF) |
| 601 | Atomic migration and bonding characteristics during a glass transition investigated using as-cast Zr-Cu-Al | 2.4 | 22 | Citations (PDF) |
| 602 | Modeling crack growth from pores under compressive loading with application to metallic glasses | 4.9 | 2 | Citations (PDF) |
| 603 | Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication | 3.8 | 11 | Citations (PDF) |
| 604 | Work softening in nanocrystalline materials induced by dislocation annihilation | 4.3 | 61 | Citations (PDF) |
| 605 | Mechanical behaviors of as-deposited and annealed nanostructured Ni–Fe alloys | 4.3 | 39 | Citations (PDF) |
| 606 | Strain-induced phase transformation in a cobalt-based superalloy during different loading modes | 5.4 | 12 | Citations (PDF) |
| 607 | Tough Hypoeutectic Zr-Based Bulk Metallic Glasses | 1.7 | 27 | Citations (PDF) |
| 608 | Influence of Strain Rate on Compressive Deformation Behavior of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature | 1.7 | 51 | Citations (PDF) |
| 609 | Defects and Plastic-Deformation Modes of Bulk-Metallic Glasses | 1.7 | 1 | Citations (PDF) |
| 610 | Structural Transitions and Magnetic Properties of Ni50Mn36.7In13.3 Particles with Amorphous-Like Phase | 1.7 | 7 | Citations (PDF) |
| 611 | Tension-Tension-Fatigue Behaviors of a Zr-Based Bulk-Metallic-Glass-Matrix Composite | 1.7 | 15 | Citations (PDF) |
| 612 | Responses of bone-forming cells on pre-immersed Zr-based bulk metallic glasses: Effects of composition and roughness | 6.7 | 110 | Citations (PDF) |
| 613 | Size effects on the fatigue behavior of bulk metallic glasses | 1.6 | 21 | Citations (PDF) |
| 614 | Inelastic neutron scattering study of the hydrogenated (Zr55Cu30Ni5Al10)99Y1bulk metallic glass | 2.4 | 13 | Citations (PDF) |
| 615 | Evolution of microstructure in a nickel-based superalloy as a function of ageing time | 1.6 | 5 | Citations (PDF) |
| 616 | Magnetic-field-driven reversal phase transition in highly textured and self-accommodated martensites of Ni–Co–Mn–In composite | 1.2 | 0 | Citations (PDF) |
| 617 | Mapping Residual-Stress Distributions in a Laser-Peened Vit-105 Bulk-Metallic Glass Using the Focused-Ion-Beam Micro-Slitting Method | 0.1 | 3 | Citations (PDF) |
| 618 | The Effects of Fatigue on the Atomic Structure with Cyclic Loading in Zr50Cu40Al10 and Zr60Cu30Al10 Glasses | 1.7 | 5 | Citations (PDF) |
| 619 | Evolution of residual-strain distribution through an overload-induced retardation period during fatigue-crack growth | 1.6 | 11 | Citations (PDF) |
| 620 | Texture crossover: Trace from multiple grains to a subgrain | 5.4 | 8 | Citations (PDF) |
| 621 | Amorphous metals for hard-tissue prosthesis | 1.4 | 104 | Citations (PDF) |
| 622 | Thin film metallic glasses: Preparations, properties, and applications | 1.4 | 87 | Citations (PDF) |
| 623 | Bending-fatigue behavior of bulk metallic glasses and their composites | 1.4 | 11 | Citations (PDF) |
| 624 | Advances in bulk metallic glasses | 1.4 | 2 | Citations (PDF) |
| 625 | Biocompatibility Study of Zirconium-Based Bulk Metallic Glasses for Orthopedic Applications | 1.7 | 39 | Citations (PDF) |
| 626 | Roles of In-Situ Forming Hard Particles in a Zr-Based Bulk-Metallic Glass during Monotonic and Cyclic Loading | 1.7 | 0 | Citations (PDF) |
| 627 | Comparison of Fatigue Strengths of Bulk Metallic Glasses Produced by Tilt Casting and High-Pressure Casting | 1.7 | 7 | Citations (PDF) |
| 628 | Fatigue Softening of (Zr58Ni13.6Cu18Al10.4)99Nb1 Bulk Metallic Glass | 1.7 | 3 | Citations (PDF) |
| 629 | Oxidation Behavior of a Pd43Cu27Ni10P20 Bulk Metallic Glass and Foam in Dry Air | 1.7 | 7 | Citations (PDF) |
| 630 | Hydride-Phase Formation and its Influence on Fatigue Crack Propagation Behavior in a Zircaloy-4 Alloy | 1.7 | 15 | Citations (PDF) |
| 631 | Indentation Behavior of Zr-Based Metallic-Glass Films via Molecular-Dynamics Simulations | 1.7 | 32 | Citations (PDF) |
| 632 | An Evaluation of the Use of X-ray Residual Stress Determination as a Means of Characterizing Oxidation Damage of Nickel-Based, Cr2O3-Forming Superalloys Subjected to Various Oxidizing Conditions | 1.0 | 9 | Citations (PDF) |
| 633 | Bulk-metallic glasses joining in a supercooled-liquid region | 3.7 | 27 | Citations (PDF) |
| 634 | Experimental study of the microstructure and stress state of shot peened and surface mechanical attrition treated nickel alloys | 4.3 | 73 | Citations (PDF) |
| 635 | Corrosion and corrosion fatigue of Vitreloy glasses containing low fractions of late transition metals | 4.3 | 18 | Citations (PDF) |
| 636 | Fatigue-induced reversible/irreversible structural-transformations in a Ni-based superalloy | 10.9 | 41 | Citations (PDF) |
| 637 | A direct comparison in the fatigue resistance enhanced by surface severe plastic deformation and shot peening in a C-2000 superalloy | 5.4 | 73 | Citations (PDF) |
| 638 | Mechanical behavior of Fe75Mo5P10C7.5B2.5 bulk-metallic glass under torsional loading | 5.4 | 6 | Citations (PDF) |
| 639 | Calculation of impurity diffusivities in α-Fe using first-principles methods | 7.6 | 139 | Citations (PDF) |
| 640 | Density change upon crystallization of amorphous Zr–Cu–Al thin films | 7.6 | 16 | Citations (PDF) |
| 641 | Neutron diffraction measurements of residual stresses around a crack tip developed under variable‐amplitude fatigue loadings | 2.3 | 22 | Citations (PDF) |
| 642 | Stress-assisted-electrochemical corrosion of Cu-based bulk metallic glass | 1.9 | 2 | Citations (PDF) |
| 643 | Revelation of the effect of structural heterogeneity on microplasticity in bulk metallic-glasses | 1.9 | 18 | Citations (PDF) |
| 644 | Quasi-static and dynamic deformation behaviors of in situ Zr-based bulk-metallic-glass-matrix composites | 1.9 | 26 | Citations (PDF) |
| 645 | Structure Modulation Driven by Cyclic Deformation in Nanocrystalline NiFe | 5.8 | 61 | Citations (PDF) |
| 646 | Resolving ensembled microstructural information of bulk-metallic-glass-matrix composites using synchrotron x-ray diffraction | 2.3 | 11 | Citations (PDF) |
| 647 | Characteristic length scales governing plasticity/brittleness of bulk metallic glasses at ambient temperature | 2.3 | 31 | Citations (PDF) |
| 648 | Corrosion-fatigue study of a Zr-based bulk-metallic glass in a physiologically relevant environment | 4.9 | 25 | Citations (PDF) |
| 649 | Manifestations of point and extensive defects of bulk-metallic glasses | 4.9 | 3 | Citations (PDF) |
| 650 | Corrosion Behavior of Fe41Co7Cr15Mo14C15B6Y2 Bulk Metallic Glass in Sulfuric Acid Solutions | 1.7 | 24 | Citations (PDF) |
| 651 | The Duality of Fracture Behavior in a Ca-based Bulk-Metallic Glass | 1.7 | 15 | Citations (PDF) |
| 652 | Large plasticity and tensile necking of Zr-based bulk-metallic-glass-matrix composites synthesized by the Bridgman solidification | 2.3 | 132 | Citations (PDF) |
| 653 | The effect of hydrogen charging on Ln-based amorphous materials | 2.3 | 9 | Citations (PDF) |
| 654 | Effects of sample geometry on deformation modes of bulk metallic glasses at the nano/micrometer scale | 1.9 | 5 | Citations (PDF) |
| 655 | Indentation behavior of a ZCAP-3 bulk metallic glass: Effects of the fatigue deformation | 1.9 | 4 | Citations (PDF) |
| 656 | Designing Ductile Zr‐Based Bulk Metallic Glasses with Phase Separated Microstructure | 2.2 | 31 | Citations (PDF) |
| 657 | Tribological Studies of a Zr‐Based Glass‐Forming Alloy with Different States | 2.2 | 15 | Citations (PDF) |
| 658 | Evolution of the primary crystals and the amorphous matrix following annealing of a bulk Zr56.6Cu17.3Ni12.5Al9.6Ti4 metallic glass | 5.4 | 4 | Citations (PDF) |
| 659 | Hold-time effects on elevated-temperature low-cycle-fatigue and crack-propagation behaviors of HAYNES® 188 superalloy | 2.8 | 20 | Citations (PDF) |
| 660 | Cyclic-loading-induced accumulation of geometrically necessary dislocations near grain boundaries in an Ni-based superalloy | 1.4 | 15 | Citations (PDF) |
| 661 | Evolution of Slip Morphology and Fatigue Crack Initiation in Surface Grains of Ni200 | 1.7 | 32 | Citations (PDF) |
| 662 | Strain rate effects on the deformation behavior of (Zr55Al10Ni5Cu30)99Y1 and Cu45Zr47.5Ag7.5 bulk metallic glasses | 5.4 | 2 | Citations (PDF) |
| 663 | Bio-corrosion study on zirconium-based bulk-metallic glasses | 3.8 | 83 | Citations (PDF) |
| 664 | Investigation of precipitation phases in as-cast wedge ingot of bulk amorphous Zr56.6Cu17.3Ni12.5Al9.6Ti4 alloy | 4.9 | 4 | Citations (PDF) |
| 665 | Mapping Residual Stress Distributions at the Micron Scale in Amorphous Materials | 1.7 | 45 | Citations (PDF) |
| 666 | High-temperature tensile-hold crack-growth behavior of HASTELLOY® X alloy compared to HAYNES® 188 and HAYNES® 230® alloys | 2.0 | 29 | Citations (PDF) |
| 667 | Rate-Dependent Deformation Behavior of Zr-Based Metallic-Glass Coatings Examined by Nanoindentation | 1.7 | 33 | Citations (PDF) |
| 668 | Fatigue and Fracture of a Bulk Nanocrystalline NiFe Alloy | 1.7 | 45 | Citations (PDF) |
| 669 | An approach to modeling the S–N behavior of bulk-metallic glasses | 7.6 | 9 | Citations (PDF) |
| 670 | Study of the structural relaxation-induced embrittlement of hypoeutectic Zr–Cu–Al ternary bulk glassy alloys | 7.6 | 94 | Citations (PDF) |
| 671 | Temperature-dependent mechanical behavior of a nanostructured Ni–Fe alloy | 5.4 | 19 | Citations (PDF) |
| 672 | High ductility of ultrafine-grained steel via phase transformation | 1.9 | 21 | Citations (PDF) |
| 673 | Temperature increases caused by shear banding in as-cast and relaxed Zr-based bulk metallic glasses under compression | 1.9 | 7 | Citations (PDF) |
| 674 | Neutron and X-ray diffraction studies and cohesive interface model of the fatigue crack deformation behavior | 1.6 | 24 | Citations (PDF) |
| 675 | Plasticity of bulk metallic glasses improved by controlling the solidification condition | 1.9 | 47 | Citations (PDF) |
| 676 | Heterogeneous nucleation in a glass-forming alloy | 2.3 | 15 | Citations (PDF) |
| 677 | Strain-Dependent Deformation Behavior in Nanocrystalline Metals | 5.8 | 66 | Citations (PDF) |
| 678 | Measurements of textures and stresses in Ni
2
MnGa ferromagnetic shape-memory alloys | 0.5 | 0 | Citations (PDF) |
| 679 | Shear strain in a shear band of a bulk-metallic glass in compression | 2.3 | 48 | Citations (PDF) |
| 680 | Two-glassy-phase bulk metallic glass with remarkable plasticity | 2.3 | 121 | Citations (PDF) |
| 681 | Electrochemical corrosion behavior of a Zr-based bulk-metallic glass | 2.3 | 74 | Citations (PDF) |
| 682 | Experimental evidence of stress-field-induced selection of variants in Ni-Mn-Ga ferromagnetic shape-memory alloys | 2.4 | 15 | Citations (PDF) |
| 683 | Strain-rate dependence of hardening and softening in compression of a bulk-metallic glass | 1.9 | 22 | Citations (PDF) |
| 684 | The effects of tensile plastic deformation on the hardness and Young’s modulus of a bulk nanocrystalline alloy studied by nanoindentation | 1.9 | 5 | Citations (PDF) |
| 685 | A study on intergranular strain evolution in nanostructured Ni–Fe alloys | 0.5 | 0 | Citations (PDF) |
| 686 | Compressive Deformation and Fracture of a Hollow Bulk-Metallic Glass | 2.2 | 10 | Citations (PDF) |
| 687 | Deformation in a Zr57Ti5Cu20Ni8Al10 bulk metallic glass during nanoindentation | 7.6 | 71 | Citations (PDF) |
| 688 | A neutron-diffraction study of the low-cycle fatigue behavior of HASTELLOY® C-22HSTM alloy | 5.2 | 21 | Citations (PDF) |
| 689 | Hardness variation across a Zr57Ti5Cu20Ni8Al10 bulk metallic glass | 2.8 | 7 | Citations (PDF) |
| 690 | Microstructural Control of Ti-Al-Nb-W-B Alloys | 1.7 | 11 | Citations (PDF) |
| 691 | Fracture of a Commercial Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 Bulk-Metallic Glass | 1.7 | 6 | Citations (PDF) |
| 692 | Rate-Dependent Temperature Increases in Shear Bands of a Bulk-Metallic Glass | 1.7 | 27 | Citations (PDF) |
| 693 | Oxidation Behavior of CuZr-Based Glassy Alloys at 400 °C to 500 °C in Dry Air | 1.7 | 24 | Citations (PDF) |
| 694 | Titanium-Based Metallic Glass Composites with Good Plasticity | 1.7 | 5 | Citations (PDF) |
| 695 | Informatics for Combinatorial Experiments: Accelerating Data Interpretation | 0.1 | 1 | Citations (PDF) |
| 696 | Effects of Glass-Forming Metallic Film on the Fatigue Behavior of C-2000 Ni-Based Alloy | 0.1 | 1 | Citations (PDF) |
| 697 | Novel tungsten oxide microneedles with nanosized tips | 2.3 | 7 | Citations (PDF) |
| 698 | Temperature dependence of serrated flows in compression in a bulk-metallic glass | 2.3 | 39 | Citations (PDF) |
| 699 | Localized heating and fracture criterion for bulk metallic glasses | 1.9 | 107 | Citations (PDF) |
| 700 | Properties of as-cast and structurally relaxed Zr-based bulk metallic glasses | 2.6 | 18 | Citations (PDF) |
| 701 | Amorphization and crystallization processes of the ball-milled Al–Y–Fe–TM alloys (TM=Ni, Co, Cu, and Fe) | 2.6 | 14 | Citations (PDF) |
| 702 | Plastic flow in dynamic compression of a Zr-based bulk metallic glass | 1.9 | 20 | Citations (PDF) |
| 703 | Thermal residual stress evolution in a TiC–50vol.% Ni3Al cermet | 5.4 | 17 | Citations (PDF) |
| 704 | Microstructural evolution and mechanical behaviors of graded cemented carbides | 5.4 | 50 | Citations (PDF) |
| 705 | Angular distortion and through-thickness residual stress distribution in the friction-stir processed 6061-T6 aluminum alloy | 5.4 | 72 | Citations (PDF) |
| 706 | As-cast Zr–Ni–Cu–Al–Nb bulk metallic glasses containing nanocrystalline particles with ductility | 5.4 | 30 | Citations (PDF) |
| 707 | Tensile behavior and deformation mechanisms of bulk ultrafine-grained copper | 2.8 | 11 | Citations (PDF) |
| 708 | Grain size dependence of tensile behavior in nanocrystalline Ni–Fe alloys | 2.8 | 32 | Citations (PDF) |
| 709 | Crystal structures and textures in the hot-forged Ni-Mn-Ga shape memory alloys | 1.7 | 18 | Citations (PDF) |
| 710 | Effects of frequency on fatigue behavior of type 316 low-carbon, nitrogen-added stainless steel in air and mercury for the spallation neutron source | 1.7 | 15 | Citations (PDF) |
| 711 | Influence of the Surface Treatment on the Deposition of Platinum Nanoparticles on the Carbon Nanotubes | 2.2 | 66 | Citations (PDF) |
| 712 | Crystallization Kinetics of the (Zr58Ni13.6Cu18Al10.4)Nb1 Bulk Metallic Glass | 2.2 | 7 | Citations (PDF) |
| 713 | Structures and mechanical behaviors ofZr55Cu35Al10bulk amorphous alloys at ambient and cryogenic temperatures | 2.4 | 48 | Citations (PDF) |
| 714 | Mechanical Behavior of Bulk Amorphous Alloys Reinforced by Ductile Particles at Cryogenic Temperatures | 5.8 | 88 | Citations (PDF) |
| 715 | A combined drop/suction-casting machine for the manufacture of bulk-metallic-glass materials | 1.1 | 30 | Citations (PDF) |
| 716 | A 200nm thick glass-forming metallic film for fatigue-property enhancements | 2.3 | 64 | Citations (PDF) |
| 717 | Embrittlement in a bulk nanocrystalline alloy induced by room-temperature aging | 2.3 | 4 | Citations (PDF) |
| 718 | Rate dependence of shear banding and serrated flows in a bulk metallic glass | 1.9 | 58 | Citations (PDF) |
| 719 | In situ Neutron Diffraction Studies of Carbide-Matrix Interactions in HAYNES® 230® Nickel Based Superalloy | 0.1 | 1 | Citations (PDF) |
| 720 | Monitoring tensile damage evolution in Nextel 312/Blackglas™ composites | 5.4 | 19 | Citations (PDF) |
| 721 | Nanocrystallization of a nickel alloy subjected to surface severe plastic deformation | 5.4 | 55 | Citations (PDF) |
| 722 | Neutron diffraction studies on lattice strain evolution around a crack-tip during tensile loading and unloading cycles | 4.3 | 27 | Citations (PDF) |
| 723 | Influences of Ta, Nb, or Mo additions in Zr-based bulk metallic glasses on microstructure and thermal properties | 4.3 | 21 | Citations (PDF) |
| 724 | Strength softening and stress relaxation of nanostructured materials | 1.7 | 21 | Citations (PDF) |
| 725 | Enhanced fatigue resistance of a nickel-based hastelloy induced by a surface nanocrystallization and hardening process | 1.6 | 71 | Citations (PDF) |
| 726 | Improved Fatigue Properties of 316L Stainless Steel Using Glass-Forming Coatings | 0.1 | 0 | Citations (PDF) |
| 727 | Neutron Diffraction Study of Fatigue Behaviors in 316LN Stainless Steel | 0.5 | 0 | Citations (PDF) |
| 728 | Low-cycle fatigue behavior of ULTIMET® alloy | 1.7 | 8 | Citations (PDF) |
| 729 | Temperature evolution and life prediction in fatigue of superalloys | 1.7 | 26 | Citations (PDF) |
| 730 | Thermal-imaging technologies for detecting damage during high-cycle fatigue | 1.7 | 31 | Citations (PDF) |
| 731 | Comparisons of experimental measurements and a theoretical model for specimen self-heating during fatigue of type 316 LN stainless steel | 1.7 | 2 | Citations (PDF) |
| 732 | The low-cycle fatigue and fatigue-crack-growth behavior of HAYNES® HR-120 alloy | 1.7 | 11 | Citations (PDF) |
| 733 | JOM-e: The application of nondestructive evaluation technologies | 1.4 | 5 | Citations (PDF) |
| 734 | The development of grain-orientation-dependent residual stressess in a cyclically deformed alloy | 23.7 | 89 | Citations (PDF) |
| 735 | International Materials Institutes [IMI], Advanced Neutron Scattering Network for Education and Research [ANSWER]: With a Focus on Mechanical Behavior of Materials | 0.5 | 2 | Citations (PDF) |
| 736 | Infrared imaging during low-cycle fatigue of HR-120 alloy | 1.7 | 28 | Citations (PDF) |
| 737 | Advanced materials II: Ultrafine-grained materials | 1.4 | 149 | Citations (PDF) |
| 738 | The mechanical properties of nanostructured materials | 1.4 | 37 | Citations (PDF) |
| 739 | Progress in equal-channel angular processing | 1.4 | 10 | Citations (PDF) |
| 740 | Effects of Pt incorporation on the isothermal oxidation behavior of chemical vapor deposition aluminide coatings | 1.7 | 125 | Citations (PDF) |
| 741 | Characterization of the temperature evolution during high-cycle fatigue of the ULTIMET superalloy: Experiment and theoretical modeling | 1.7 | 92 | Citations (PDF) |
| 742 | Advanced materials: Shape-memory materials | 1.4 | 3 | Citations (PDF) |
| 743 | The fatigue behavior of shape-memory alloys | 1.4 | 92 | Citations (PDF) |
| 744 | Damage mechanisms and fiber orientation effects on the load-bearing capabilities of a NEXTEL/BLACKGLAS low-cost ceramic composite | 1.7 | 0 | Citations (PDF) |
| 745 | Infrared temperature mapping of ULTIMET alloy during high-cycle fatigue tests | 1.7 | 44 | Citations (PDF) |
| 746 | Damage mechanisms and fiber orientation effects on the load-bearing capabilities of a NEXTEL/BLACKGLAS low-cost ceramic composite | 1.7 | 8 | Citations (PDF) |
| 747 | The mechanical behavior of high-temperature materials | 1.4 | 0 | Citations (PDF) |
| 748 | The impact-fatigue fracture of metallic materials | 1.4 | 12 | Citations (PDF) |
| 749 | High-temperature mechanical behavior of Ti-6Al-4V alloy and TiC
p
/Ti-6Al-4V composite | 1.7 | 38 | Citations (PDF) |
| 750 | A thermodynamic interpretation of the size-ratio limits for laves phase formation | 1.7 | 58 | Citations (PDF) |
| 751 | Synthesis and cyclic oxidation behavior of a (Ni, Pt) Al coating on a desulfurized Ni-base superalloy | 1.7 | 137 | Citations (PDF) |
| 752 | Effects of sulfur impurity on the scale adhesion behavior of a desulfurized Ni-based superalloy aluminized by chemical vapor deposition | 1.7 | 83 | Citations (PDF) |
| 753 | Anisotropic conductivities of multiphase particulate metal-matrix composites | 7.0 | 19 | Citations (PDF) |
| 754 | Damage mechanisms in a cast ductile iron and a Al2O3p /Al composite | 1.7 | 8 | Citations (PDF) |
| 755 | CFCC fatigue: A literature review | 1.4 | 3 | Citations (PDF) |
| 756 | Fatigue behavior in nickel-based superalloys: A literature review | 1.4 | 44 | Citations (PDF) |
| 757 | High-performance composites: Commonalty of phenomena | 1.4 | 6 | Citations (PDF) |
| 758 | Modeling the micromechanical aspects of composites | 1.4 | 0 | Citations (PDF) |
| 759 | The monotonic and fatigue behavior of CFCCs | 1.4 | 2 | Citations (PDF) |
| 760 | Materials characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites: Part I. Tensile and fatigue behavior | 1.7 | 10 | Citations (PDF) |
| 761 | Materials characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites: Part II. Theoretical modeling of fatigue behavior | 1.7 | 11 | Citations (PDF) |
| 762 | Fiber-Reinforced CMCs: Processing, mechanical behavior, modeling | 1.4 | 10 | Citations (PDF) |
| 763 | Characterization of anisotropie elastic constants of silicon-carbide participate reinforced aluminum metal matrix composites: Part I. Experiment | 1.7 | 36 | Citations (PDF) |
| 764 | Characterization of anisotropie elastic constants of silicon-carbide participate reinforced aluminum metal matrix composites: Part II. Theory | 1.7 | 22 | Citations (PDF) |
| 765 | Nondestructive Characterization of Woven Fabric Ceramic Composites | 0.1 | 8 | Citations (PDF) |
| 766 | Optimization of Bundle Infiltration in the Forced Chemical Vapor Infiltration (FCVI) Process | 0.1 | 3 | Citations (PDF) |
| 767 | Fiber Coatings and the Fracture Behavior of a Continuous Fiber Ceramic Composite | 0.1 | 9 | Citations (PDF) |
| 768 | Intermetallic alloys and their composites: The promise and challenges remain | 1.4 | 0 | Citations (PDF) |
| 769 | Crack propagation behavior under creep conditions | 1.9 | 8 | Citations (PDF) |
| 770 | Predicting the life of high-temperature structural components in power plants | 1.4 | 40 | Citations (PDF) |
| 771 | Determining material properties of metal-matrix composites by NDE | 1.4 | 23 | Citations (PDF) |
| 772 | Modeling of Transverse Mechanical Behavior of Continuous Fiber Reinforced Metal-Matrix Composites | 1.7 | 16 | Citations (PDF) |
| 773 | Fracture toughness behavior of ex-service 2-1/4Cr-1Mo steels from a 22-year-old fossil power plant | 0.8 | 24 | Citations (PDF) |
| 774 | Fundamental relationships in metal-matrix composites | 1.4 | 5 | Citations (PDF) |
| 775 | Fatigue crack growth behavior of pressure vessel steels and submerged arc weldments in a high-temperature pressurized water environment | 0.8 | 10 | Citations (PDF) |
| 776 | Microstructural characterization of a silicon carbide whisker reinforced 2124 aluminium metal matrix composite | 2.8 | 33 | Citations (PDF) |
| 777 | Influence of prestrain history on fracture toughness properties of steels | 0.8 | 44 | Citations (PDF) |
| 778 | Determination of fracture toughness properties of 4340 steel | 1.9 | 6 | Citations (PDF) |
| 779 | Plastic work of fatigue crack propagation in steels and aluminum alloys | 0.8 | 49 | Citations (PDF) |
| 780 | Electrohydraulic fatigue apparatus for testing at cryogenic temperature | 1.1 | 5 | Citations (PDF) |
| 781 | Nucleation and propagation of fatigue cracks in Al-304 stainless steel laminate composite | 2.8 | 31 | Citations (PDF) |
| 782 | Review on Tribological and Corrosion Properties of Amorphous Silicon-Based Coatings Fabricated by Chemical Vapor Deposition | 2.0 | 6 | Citations (PDF) |
| 783 | Amorphous TiZrNbTaFe high entropy alloy coatings for enhanced osseointegration of orthopedic implants | 4.9 | 2 | Citations (PDF) |
| 784 | Research Progress on Polyether Ether Ketone (PEEK) Composite Coatings: A Review | 2.0 | 11 | Citations (PDF) |
| 785 | Morphology, microstructure, and mechanical properties of TiZrTa0.7NbMo refractory high-entropy alloy spherical powder prepared by ultrasonic atomization | 3.8 | 20 | Citations (PDF) |
| 786 | Microstructure-agnostic deep learning for mechanistic discovery of corrosion-resistant Co-Cr-Fe-Ni MPEAs | 7.6 | 9 | Citations (PDF) |
| 787 | In-situ electron channeling contrast imaging of cyclic deformation mechanisms in CrCoNi medium-entropy alloy | 7.6 | 7 | Citations (PDF) |
| 788 | Electrocatalytic performance of high-entropy alloys in alkaline hydrogen evolution reaction with high electronegativity difference | 6.7 | 15 | Citations (PDF) |
| 789 | Superior dynamic response of a lightweight compositionally complex steel enabled by intricate twinning and phase transformation | 7.6 | 6 | Citations (PDF) |
| 790 | Enhanced strength-ductility synergy in cold-sprayed CoCrFeNi-Ti high-entropy alloys via integrated post-processing strategy | 3.8 | 6 | Citations (PDF) |
| 791 | Eliminating intergranular oxidation and microstructural instability in chemically complex intermetallic alloys featuring nano-disorder interfaces | 7.2 | 19 | Citations (PDF) |
| 792 | Properties and performances of high-entropy materials in batteries | 5.6 | 6 | Citations (PDF) |
| 793 | Quantitative analysis of phase structures in classical high-entropy alloys with deep insights into deformation mechanisms | 5.4 | 3 | Citations (PDF) |
| 794 | A Review on Tribological Wear and Corrosion Resistance of Surface Coatings on Steel Substrates | 2.0 | 28 | Citations (PDF) |
| 795 | Achieving electrochemical and mechanical stability in a lightweight titanium alloy | 10.8 | 23 | Citations (PDF) |
| 796 | Investigation of short-range order and mechanical strength of AlCoCrFeNi high-entropy alloys using atomistic simulations and data analytics | 2.6 | 4 | Citations (PDF) |
| 797 | Enhanced radiation tolerance in Ni-free Fe-Cr-Al-based alloy via the disordering-ordering transition of coherent BCC-L21 phases | 7.6 | 0 | Citations (PDF) |
| 798 | Study on mechanical and hot deformation behavior of (TiZrHf)50Ni30Cu14Co6 high-entropy shape memory alloy | 4.9 | 1 | Citations (PDF) |
| 799 | Cost-effective design of high-performance NiCoCrAlTi high-entropy alloys through Fe-mediated phase competition control: a combined experimental and first-principles study | 6.7 | 7 | Citations (PDF) |
| 800 | Surface Nanostructure Control and Thermodynamic Stability Analysis of Femtosecond Laser-Ablated CuCoMn
1.75
NiFe
0.25
Nanoparticles | 3.0 | 1 | Citations (PDF) |
| 801 | Yield Strength-Plasticity Trade-Off and Uncertainty Quantification for Machine-Learning-Based Design of Refractory High-Entropy Alloys | 2.1 | 0 | Citations (PDF) |
| 802 | Overcoming the intermediate-temperature embrittlement of high-strength Ni-Co-base wrought superalloy via C addition | 4.3 | 5 | Citations (PDF) |
| 803 | Microstructure-guided design of single-phase refractory high-entropy alloys via competing chemical short-range orders | 5.4 | 2 | Citations (PDF) |
| 804 | Short-range order governs plastic flow localization in irradiated multi-principal element alloys | 4.3 | 1 | Citations (PDF) |
| 805 | The friction and wear as well as corrosion resistance properties of bearing steel with multi-interface structural coatings: A review | 1.5 | 4 | Citations (PDF) |
| 806 | Machine Learning Applications in Predicting Friction Properties of Bearing Steel: A Review 0, 8, 355-370 | | 0 | Citations (PDF) |
| 807 | A comprehensive first-principles study of the effects of the exchange-correlation functional and magnetism on defect and diffusion properties of the CoCrNi medium-entropy alloy | 1.5 | 2 | Citations (PDF) |
| 808 | A broadly applicable strategy for achieving low friction and wear in metallic-structural materials by regulating the sliding mode and counter-face material: Tribo-induced lubrication effect 0, 1, 100158 | | 2 | Citations (PDF) |
| 809 | Design strategy for enhancing mechanical properties and magnetocaloric effect of eutectic Ni-Mn-Sn-Fe alloy via laser powder bed fusion | 5.4 | 3 | Citations (PDF) |
| 810 | Additive manufacturing of TiZrNb lightweight refractory medium-entropy alloy with excellent mechanical properties | 5.4 | 5 | Citations (PDF) |
| 811 | A semi-empirical model for predicting tensile strength of metallic glass matrix composites at room temperature by nanoindentation | 10.5 | 1 | Citations (PDF) |
| 812 | Synergistic creep strengthening by multi-component L1
2
and MC carbides in an additively manufactured hierarchical heterostructure | 8.7 | 1 | Citations (PDF) |
| 813 | High-throughput screening and Cu-content-driven optimization of properties in Cux(CoCrFeNi)100-x high-entropy alloys | 4.9 | 7 | Citations (PDF) |
| 814 | Recent progress on the substructure of Fe-C martensite and pearlites: A review | 4.0 | 0 | Citations (PDF) |
| 815 | Dislocation-induced ordering as a source of strengthening in refractory multi-principal element alloys | 8.0 | 2 | Citations (PDF) |
| 816 | Machine-learning-assisted design of high-hardness high-entropy alloys based on component space screening | 5.4 | 3 | Citations (PDF) |
| 817 | Electrical percolation in (CoCrFeNi)100-Si thin films with graded substitutional nonmetallic composition | 4.9 | 0 | Citations (PDF) |
| 818 | Quantum-annealed machine learning discovers ductile, high strength and corrosion-resistant high-entropy alloy | 8.0 | 0 | Citations (PDF) |
| 819 | Microstructural and property evolution of Cux(CoCrFeNi)100-x high-entropy alloys during thermo-mechanical processing | 3.8 | 1 | Citations (PDF) |
| 820 | Significant grain refinement and enhanced mechanical behavior of CoNiV medium-entropy alloy wires by Cu microalloying | 10.9 | 4 | Citations (PDF) |
| 821 | Effects of modulation layer thickness on microstructures and mechanical behavior of VN/TiN-Ni nano-multilayered films | 3.5 | 0 | Citations (PDF) |
| 822 | Unraveling the structural stability and protective performance of AlNiCe amorphous thin films under atomic oxygen exposure | 7.2 | 0 | Citations (PDF) |
| 823 | Superior Strength and Temperature-Dependent Deformation Mechanisms of NiCrPd Single-Phase Medium-Entropy Alloy | 2.5 | 0 | Citations (PDF) |
| 824 | Tribocorrosion under seawater boundary lubrication: A comparative study of WC-based coating systems with different binder phase continuity | 4.8 | 0 | Citations (PDF) |
| 825 | Direct visualization of the existence of surface local chemical order in a high-entropy CoCrFeMnNi alloy | 10.8 | 4 | Citations (PDF) |
| 826 | Regulating heterogeneous microstructures for enhanced strength-ductility and isotropy in titanium alloy | 4.9 | 0 | Citations (PDF) |
| 827 | Bainite Transformation Kinetics in Medium-Carbon Steel: Sub-MS and Supra-MS Austempering | 1.1 | 0 | Citations (PDF) |
| 828 | Creep in multi-principal element materials –– A review | 12.6 | 2 | Citations (PDF) |
| 829 | Quantification of ε-martensite in Fe–17Mn alloy | 4.9 | 1 | Citations (PDF) |
| 830 | Microstructural engineering through controlled thermomechanical processing to enhance the performance of the Cu-based multi-principal component alloy 0, 2, 100318 | | 2 | Citations (PDF) |
| 831 | Delineating Oxidation Aspects of an Additively Manufactured Nanoprecipitation-Strengthened Al
0.2
Co
1.5
CrFeNi
1.5
Ti
0.3
High-Entropy Alloy | 4.1 | 0 | Citations (PDF) |
| 832 | Corrigendum to “Creep in multi-principal element materials — A review” [Mater. Today 97 (2026) 103335] | 12.6 | 0 | Citations (PDF) |
| 833 | Research Progress on Metal‐Organic Framework Materials in Corrosion‐Resistant and Antimicrobial Metal Functional Coatings | 8.5 | 8 | Citations (PDF) |
| 834 | Nitrogen-regulated high-entropy nitride coatings for mechanical strengthening and corrosion control of biodegradable magnesium alloy | 4.9 | 0 | Citations (PDF) |
| 835 | The Annealing Influence on the Mechanical Behavior of Ni45Co23Cr20Mo5Al7 Medium-Entropy Alloy 0, 1, | | 0 | Citations (PDF) |
| 836 | Advanced Applications for Smart-Metallic Materials 0, 1, | | 0 | Citations (PDF) |
| 837 | Development of novel customized heat treatment and its superiority verification in tensile properties in single crystal superalloys | 5.4 | 0 | Citations (PDF) |
| 838 | Dislocation dynamics in noble-metal high-entropy alloys under nanoindentation: Neuroevolution potential insights | 2.3 | 0 | Citations (PDF) |
| 839 | Advances in Computational and Experimental Approaches to Chemical Short‐Range Order Formation in Multi‐Principal Element Alloys | 7.7 | 0 | Citations (PDF) |
| 840 | Composition-driven amorphization and protective properties of CrMoNbSiC high-entropy films | 2.8 | 0 | Citations (PDF) |
| 841 | Fe-mediated phase stability and precipitation kinetics in NiCoCr-based multi-principal-element alloys: Microstructural evolution and high-temperature mechanical response | 5.4 | 0 | Citations (PDF) |
| 842 | Evolution of Local Two‐Dimensional Ordered Composite Defects: A Novel Strategy for Strength Breakthrough in FeMnCrCo High‐Entropy Alloys | 11.9 | 0 | Citations (PDF) |
