| 1 | Ca-Doped La
0.5
Ba
0.5
FeO
3-δ
As an Efficient Cathode Material for Proton-Conducting Direct Ammonia Fuel Cells 2025, 1, 63-72 | | 4 | Citations (PDF) |
| 2 | Optimising lithium lanthanum cerate garnet ceramic electrolytes for fast lithium-ion conduction | 6.1 | 5 | Citations (PDF) |
| 3 | Ultrasonic spraying of Ce(Mn,Fe)O2 nanocatalysts onto a perovskite surface for highly efficient electrochemical CO2 reduction | 22.1 | 36 | Citations (PDF) |
| 4 | Reversible solid oxide electrochemical cells with regulated oxygen trapping nano-dots on Ni-Fe fuel electrode | 8.6 | 12 | Citations (PDF) |
| 5 | Combined Exsolution and Electrodeposition Strategy for Enhancing Electrocatalytic Activity of Ti‐Based Perovskite Oxides in Oxygen and Hydrogen Evolution Reactions | 7.7 | 10 | Citations (PDF) |
| 6 | Optimisation of a P3 phase with superior high voltage reversibility | 6.7 | 0 | Citations (PDF) |
| 7 | Surface Interactive Assembly of Ruthenium Based Janus Bimetallic Nanoparticles With Active Dual‐Function Sites for Efficient Use in CO2 Utilization | 11.9 | 6 | Citations (PDF) |
| 8 | In situ growth of Cu0-modified oxynitride for optimized photocatalytic nitric oxide oxidation | 7.8 | 11 | Citations (PDF) |
| 9 | Nucleation-density-regulated dimensional evolution of growth unit from 2D nanosheets to 1D nanoneedles in self-assembled hierarchical NiCo
2
O
4
for enhanced lithium storage | 6.7 | 8 | Citations (PDF) |
| 10 | Thermal expansion of lithiated silicon (Li
13
Si
4
and Li
7
Si
3
) anodes: a powder neutron diffraction study | 6.7 | 9 | Citations (PDF) |
| 11 | Enhancement of catalytic performance in Zr0.1Ce0.9O2-δ through transition metal doping and exsolution | 2.6 | 4 | Citations (PDF) |
| 12 | Surface Interactive Assembly of Ruthenium Based Janus Bimetallic Nanoparticles With Active Dual‐Function Sites for Efficient Use in CO<sub>2</sub> Utilization (Adv. Funct. Mater. 27/2025) | 11.9 | 0 | Citations (PDF) |
| 13 | Enhanced CO2 Electrolysis Through Mn Substitution Coupled with Ni Exsolution in Lanthanum Calcium Titanate Electrodes | 17.5 | 28 | Citations (PDF) |
| 14 | New approaches to three-dimensional positive electrodes enabling scalable high areal capacity | 6.7 | 4 | Citations (PDF) |
| 15 | Improving the Oxygen Evolution Reaction: Exsolved Cobalt Nanoparticles on Titanate Perovskite Catalyst | 7.3 | 11 | Citations (PDF) |
| 16 | Assembling ultrathin nickel hydroxide nanosheets on cadmium sulfide hollow spheres for enhanced CO2 photoreduction | 8.6 | 29 | Citations (PDF) |
| 17 | A New Approach to Fuel Cell Electrodes: Lanthanum Aluminate Yielding Fine Pt Nanoparticle Exsolution for Oxygen Reduction Reaction | 16.3 | 24 | Citations (PDF) |
| 18 | Grain-boundary-dependent segregation and phase separation in ceria–zirconia from atomistic simulation | 7.6 | 8 | Citations (PDF) |
| 19 | Syngas Production from CO2 and H2O via Solid-Oxide Electrolyzer Cells: Fundamentals, Materials, Degradation, Operating Conditions, and Applications | 42.5 | 128 | Citations (PDF) |
| 20 | Structure of Magnesium Doped Yttrium Barium Zirconate as a Novel Compound | 0.7 | 0 | Citations (PDF) |
| 21 | Unraveling the potential of heteroanionic titanium oxycarbide photocatalysts for detoxifying SARS-Cov-2 antigen rapid test kit reagent solution in water sources | 2.0 | 3 | Citations (PDF) |
| 22 | Synergistic growth of nickel and platinum nanoparticles via exsolution and surface reaction | 10.8 | 31 | Citations (PDF) |
| 23 | Designing the Solid Oxide Electrochemical Cell for Superior Thermal Shock Resistance | 12.4 | 9 | Citations (PDF) |
| 24 | Boosting Electrochemical Performance via Extra‐Role of La‐Doped CeO2‐δ Interlayer for “Oxygen Provider” at High‐Current SOFC Operation | 7.7 | 11 | Citations (PDF) |
| 25 | Boosting Electrochemical Performance via Extra‐Role of La‐Doped CeO2‐δ Interlayer for “Oxygen Provider” at High‐Current SOFC Operation (Adv. Sci. 46/2024) | 7.7 | 0 | Citations (PDF) |
| 26 | Electrochemical Activation Applied to Perovskite Titanate Fibers to Yield Supported Alloy Nanoparticles for Electrocatalytic Application | 7.3 | 18 | Citations (PDF) |
| 27 | Gas sensitization and photochromism of CaTiO3−δ for visible-light photocatalysis | 8.6 | 15 | Citations (PDF) |
| 28 | Influence of electrode processing and electrolyte composition on multiwall carbon nanotube negative electrodes for sodium ion batteries | 2.9 | 7 | Citations (PDF) |
| 29 | Hydrogen ionic conductors and ammonia conversions | 2.6 | 6 | Citations (PDF) |
| 30 | Green ammonia production via the integration of a solid oxide electrolyser and a Haber-Bosch loop with a series of solid electrolyte oxygen pumps | 8.5 | 38 | Citations (PDF) |
| 31 | Water/oil nanoemulsion-based synthesis of BixSn6-2xSy (0.33 ≤ × ≤ 2.95) semiconductor QDs for efficient photocatalytic degradation of MB dye | 2.6 | 3 | Citations (PDF) |
| 32 | Nanoparticle exsolutionviaelectrochemical switching in perovskite fibers for solid oxide fuel cell electrodes | 6.7 | 32 | Citations (PDF) |
| 33 | Renewable syngas & hydrogen synthesis via steam reforming of glycerol over ceria-mediated exsolved metal nano catalysts | 6.6 | 12 | Citations (PDF) |
| 34 | Evaluation and Upscaling of Impregnated La0.20Sr0.25Ca0.45TiO3 Fuel Electrodes for Solid Oxide Electrolysis Cells Under H2O, CO2 and Co-Electrolysis Conditions | 0.5 | 1 | Citations (PDF) |
| 35 | Investigation of the Abnormal I-V Curve Shape of Hybrid Direct Carbon Fuel Cell Using Lanthanum Strontium Calcium Titanate-Based Anode | 0.5 | 1 | Citations (PDF) |
| 36 | The Exsolution of Cu Particles from Doped Barium Cerate Zirconate via Barium Cuprate Intermediate Phases | 11.9 | 8 | Citations (PDF) |
| 37 | Influence of various sacrificial reagents on congo red degradation and H2O2 production based on heteroanionic titanium oxycarbide photocatalyst and its mechanism | 2.2 | 8 | Citations (PDF) |
| 38 | A robust perovskite photosensitizer for efficient visible-light-driven CO2 reduction | 4.1 | 8 | Citations (PDF) |
| 39 | Exsolved materials for CO2 reduction in high-temperature electrolysis cells | 3.3 | 22 | Citations (PDF) |
| 40 | Roadmap on exsolution for energy applications | 2.9 | 65 | Citations (PDF) |
| 41 | High Energy Density Li/Ni/Co‐Free O3/P2 Sodium Layered Oxide Intergrowth for Sodium‐Ion Batteries | 2.8 | 12 | Citations (PDF) |
| 42 | Ionic conductivity and disorder in calcium and barium nitrogen hydrogen phases | 2.6 | 1 | Citations (PDF) |
| 43 | Order–disorder and ionic conductivity in calcium nitride-hydride | 10.8 | 17 | Citations (PDF) |
| 44 | Co nanoparticles decorated with in-situ exsolved oxygen-storage CeO2 for an efficient and stable electrolysis of pure CO2 | 6.1 | 7 | Citations (PDF) |
| 45 | Investigations into Improved Electrochemical Performance of Sn Doped Hard Carbons as Negatives for Sodium‐Ion Batteries | 2.8 | 4 | Citations (PDF) |
| 46 | Al/Nb Co-Doped La2Ti2O7 As an Efficient Photocatalyst for H2 Production from Water | 0.0 | 0 | Citations (PDF) |
| 47 | Tape Casting for Development of Thermal Batteries | 0.0 | 0 | Citations (PDF) |
| 48 | Room Temperature Exsolution of Cds Nanodots on A‐site Deficient Cotton‐Ball Like Titanate Perovskite Nanoparticles for H2 Production Under Visible Light | 16.3 | 14 | Citations (PDF) |
| 49 | Interfacial Chemical Stability of Doped Li<sub>7-X</sub>La<sub>3</sub>Zr<sub>2</sub>
<sub>-X</sub>(Nb/Ta<sub>X</sub>)O<sub>12 </sub> with LiCoO<sub>2</sub> Electrode Material | 0.0 | 0 | Citations (PDF) |
| 50 | (Invited) Different Designs for Ta-Doped Llzo Based Solid State Battery Prepared By Tape-Casting | 0.0 | 0 | Citations (PDF) |
| 51 | High-performance and durable alcohol-fueled symmetrical solid oxide fuel cell based on ferrite perovskite electrode | 8.9 | 35 | Citations (PDF) |
| 52 | Computational Screening of Anode Coatings for Garnet‐Type Solid‐State Batteries | 2.8 | 11 | Citations (PDF) |
| 53 | Progress and potential for symmetrical solid oxide electrolysis cells | 9.6 | 135 | Citations (PDF) |
| 54 | Enhanced oxygen redox reversibility and capacity retention of titanium-substituted Na4/7[□1/7Ti1/7Mn5/7]O2 in sodium-ion batteries | 6.7 | 48 | Citations (PDF) |
| 55 | Enhanced Cycling Stability in the Anion Redox Material P3‐Type Zn‐Substituted Sodium Manganese Oxide | 3.2 | 15 | Citations (PDF) |
| 56 | A Novel Solid Oxide Electrochemical Oxygen Pump for Oxygen Therapy | 2.2 | 13 | Citations (PDF) |
| 57 | La0.5Ba0.5CuxFe1−xO3−δ as cathode for high-performance proton-conducting solid oxide fuel cell | 7.9 | 25 | Citations (PDF) |
| 58 | Phase transition with in situ exsolution nanoparticles in the reduced Pr0.5Ba0.5Fe0.8Ni0.2O3−δ electrode for symmetric solid oxide cells | 6.7 | 57 | Citations (PDF) |
| 59 | Effect of Cu substitution on anion redox behaviour in P3-type sodium manganese oxides | 2.9 | 11 | Citations (PDF) |
| 60 | Transparent conductive oxide type materials as the anode of solid oxide fuel cells at a reduced temperature | 6.7 | 11 | Citations (PDF) |
| 61 | Geometric Frustration and Concerted Migration in the Superionic Conductor Barium Hydride | 4.6 | 12 | Citations (PDF) |
| 62 | Anti-phase boundary accelerated exsolution of nanoparticles in non-stoichiometric perovskite thin films | 10.8 | 53 | Citations (PDF) |
| 63 | Synthesis and optical characterization of lead-free phenylenediammonium bismuth halide perovskites: a long charge carrier lifetime in phenylenediammonium bismuth iodide | 3.6 | 5 | Citations (PDF) |
| 64 | Characterisation of direct ammonia proton conducting tubular ceramic fuel cells for maritime applications | 6.7 | 30 | Citations (PDF) |
| 65 | Graphitic-C3N4 coated floating glass beads for photocatalytic destruction of synthetic and natural organic compounds in water under UV light | 3.5 | 33 | Citations (PDF) |
| 66 | Pd and GDC Co-infiltrated LSCM cathode for high-temperature CO2 electrolysis using solid oxide electrolysis cells | 8.6 | 59 | Citations (PDF) |
| 67 | Perovskite Oxynitride Solid Solutions of LaTaON2‐CaTaO2N with Greatly Enhanced Photogenerated Charge Separation for Solar‐Driven Overall Water Splitting | 7.7 | 45 | Citations (PDF) |
| 68 | Activation of anion redox in P3 structure cobalt-doped sodium manganese oxide via introduction of transition metal vacancies | 6.1 | 20 | Citations (PDF) |
| 69 | Carrier extraction from metallic perovskite oxide nanoparticles | 3.6 | 1 | Citations (PDF) |
| 70 | Durability of La0.20Sr0.25Ca0.45TiO3-based SOFC anodes: identifying sources of degradation in Ni and Pt/ceria co-impregnated fuel electrode microstructures | 6.7 | 19 | Citations (PDF) |
| 71 | Upscaling of Co‐Impregnated La0.20Sr0.25Ca0.45TiO3 Anodes for Solid Oxide Fuel Cells: A Progress Report on a Decade of Academic‐Industrial Collaboration | 16.3 | 22 | Citations (PDF) |
| 72 | Achieving Strong Coherency for a Composite Electrode via One-Pot Method with Enhanced Electrochemical Performance in Reversible Solid Oxide Cells | 9.8 | 68 | Citations (PDF) |
| 73 | Alkaline modified A-site deficient perovskite catalyst surface with exsolved nanoparticles and functionality in biomass valorisation | 5.5 | 21 | Citations (PDF) |
| 74 | Non-stoichiometry, structure and properties of proton-conducting perovskite oxides | 2.6 | 38 | Citations (PDF) |
| 75 | Platinum incorporation into titanate perovskites to deliver emergent active and stable platinum nanoparticles | 15.5 | 121 | Citations (PDF) |
| 76 | Enhancing Electrochemical CO2 Reduction using Ce(Mn,Fe)O2 with La(Sr)Cr(Mn)O3 Cathode for High‐Temperature Solid Oxide Electrolysis Cells | 16.3 | 93 | Citations (PDF) |
| 77 | Time-resolved in-situ x-ray diffraction study of CaO and CaO:Ca3Al2O6 composite catalysts for biodiesel production | 2.9 | 2 | Citations (PDF) |
| 78 | 2021 roadmap for sodium-ion batteries | 2.9 | 235 | Citations (PDF) |
| 79 | Roadmap on inorganic perovskites for energy applications | 2.9 | 74 | Citations (PDF) |
| 80 | Use of Interplay between A‐Site Non‐Stoichiometry and Hydroxide Doping to Deliver Novel Proton‐Conducting Perovskite Oxides | 16.3 | 37 | Citations (PDF) |
| 81 | Development of the Ca/FeS2Chemistry for Thermal Batteries | 4.6 | 15 | Citations (PDF) |
| 82 | Improved mechanical strength, proton conductivity and power density in an ‘all-protonic’ ceramic fuel cell at intermediate temperature | 2.7 | 57 | Citations (PDF) |
| 83 | Iron-based electrode materials for solid oxide fuel cells and electrolysers | 22.1 | 122 | Citations (PDF) |
| 84 | Insight into graphite oxidation in a NiO-based hybrid direct carbon fuel cell | 6.6 | 4 | Citations (PDF) |
| 85 | Synthesis and electrochemical characterization of La
0.75
Sr
0.25
Mn
0.5
Cr
0.5−
x
Al
x
O
3
, for IT‐ and HT‐SOFCs | 1.9 | 4 | Citations (PDF) |
| 86 | An FeNbO4-based oxide anode for a solid oxide fuel cell (SOFC) | 4.1 | 27 | Citations (PDF) |
| 87 | ‘All in one’ photo-reactor pod containing TiO2 coated glass beads and LEDs for continuous photocatalytic destruction of cyanotoxins in water | 1.3 | 10 | Citations (PDF) |
| 88 | Oxygen Redox Activity through a Reductive Coupling Mechanism in the P3-Type Nickel-Doped Sodium Manganese Oxide | 3.9 | 73 | Citations (PDF) |
| 89 | Vacancy-Enhanced Oxygen Redox Reversibility in P3-Type Magnesium-Doped Sodium Manganese Oxide Na0.67Mg0.2Mn0.8O2 | 3.9 | 21 | Citations (PDF) |
| 90 | Photocatalytic removal of the cyanobacterium Microcystis aeruginosa PCC7813 and four microcystins by TiO2 coated porous glass beads with UV-LED irradiation | 5.6 | 43 | Citations (PDF) |
| 91 | Boosting CO2 electrolysis performance via calcium-oxide-looping combined with in situ exsolved Ni–Fe nanoparticles in a symmetrical solid oxide electrolysis cell | 6.7 | 47 | Citations (PDF) |
| 92 | A New High‐Performance Proton‐Conducting Electrolyte for Next‐Generation Solid Oxide Fuel Cells | 2.4 | 19 | Citations (PDF) |
| 93 | A Ce/Ru Codoped SrFeO3−δ Perovskite for a Coke-Resistant Anode of a Symmetrical Solid Oxide Fuel Cell | 9.8 | 112 | Citations (PDF) |
| 94 | Exsolution of Catalytically Active Iridium Nanoparticles from Strontium Titanate | 5.5 | 40 | Citations (PDF) |
| 95 | Reversible, all-perovskite SOFCs based on La, Sr gallates | 6.6 | 11 | Citations (PDF) |
| 96 | A novel electrode with multifunction and regeneration for highly efficient and stable symmetrical solid oxide cell | 6.1 | 54 | Citations (PDF) |
| 97 | Effect of halide-mixing on tolerance factor and charge-carrier dynamics in (CH3NH3PbBr3−xClx) perovskites powders | 1.8 | 10 | Citations (PDF) |
| 98 | Lithiation of V
2
O
3
(SO
4
)
2
– a flexible insertion host | 6.7 | 3 | Citations (PDF) |
| 99 | Atomic Layer Fluorination of 5 V Class Positive Electrode Material LiCoPO4 for Enhanced Electrochemical Performance | 2.8 | 4 | Citations (PDF) |
| 100 | High oxide ion and proton conductivity in a disordered hexagonal perovskite | 23.7 | 236 | Citations (PDF) |
| 101 | Evaluating sulfur-tolerance of metal/Ce0.80Gd0.20O1.90 co-impregnated La0.20Sr0.25Ca0.45TiO3 anodes for solid oxide fuel cells | 2.6 | 14 | Citations (PDF) |
| 102 | Controlling the Energy-Level Alignment of Silicon Carbide Nanocrystals by Combining Surface Chemistry with Quantum Confinement | 2.9 | 23 | Citations (PDF) |
| 103 | Bandgap bowing in a zero-dimensional hybrid halide perovskite derivative: spin–orbit coupling versus lattice strain | 6.7 | 26 | Citations (PDF) |
| 104 | Replacement of Ca by Ni in a Perovskite Titanate to Yield a Novel Perovskite Exsolution Architecture for Oxygen‐Evolution Reactions | 16.3 | 69 | Citations (PDF) |
| 105 | 2020 roadmap on solid-state batteries | 2.9 | 119 | Citations (PDF) |
| 106 | Spray Pyrolysis Strategy for Preparation of Cathode-Supported Protonic Ceramic Fuel Cells | 0.0 | 0 | Citations (PDF) |
| 107 | Gasification of Glycerol Over Ni/γ-Al2O3 For Hydrogen Production: Tailoring Catalytic Properties to Control Deactivation | 0.8 | 4 | Citations (PDF) |
| 108 | Oxygen storage capacity and thermal stability of brownmillerite-type Ca2(Al1-xGax)MnO5+δ oxides | 4.9 | 7 | Citations (PDF) |
| 109 | Evolution of Anodic Product from Molybdenum Metal in Absolute Ethanol and Humidity Sensing under Ambient Conditions | 2.4 | 13 | Citations (PDF) |
| 110 | In Situ Thermal Battery Discharge Using CoS2 as a Cathode Material | 2.2 | 39 | Citations (PDF) |
| 111 | Using cellulose polymorphs for enhanced hydrogen production from photocatalytic reforming | 2.9 | 23 | Citations (PDF) |
| 112 | Photo-catalytic hydrogen production over Au/g-C3N4: effect of gold particle dispersion and morphology | 2.0 | 45 | Citations (PDF) |
| 113 | Enhanced Cycling Performance of Magnesium‐Doped Lithium Cobalt Phosphate | 3.2 | 8 | Citations (PDF) |
| 114 | Nanostructured Perovskite Solar Cells | 3.0 | 30 | Citations (PDF) |
| 115 | Manufacturing and Electrochemical Evaluation of SOFCRoll with the La0.43Ca0.37Ni0.06Ti0.94O3-γ - Zr0.92Y0.08O2-γ anode | 0.5 | 4 | Citations (PDF) |
| 116 | Fabrication and Characterization of a Small Tubular Solid Oxide Fuel Cell with the La0.43Ca0.37Ni0.06Ti0.94O3-γ Anode | 0.5 | 0 | Citations (PDF) |
| 117 | Fluorite Materials for SOFC Electrolyte Applications | 0.5 | 10 | Citations (PDF) |
| 118 | Enhanced CO2 Electrolysis at Redox Engineered Interfaces | 0.5 | 3 | Citations (PDF) |
| 119 | 'Waste-to-Energy’ Fuel Cell Systems | 0.5 | 3 | Citations (PDF) |
| 120 | Development of Alternative Fuel Electrodes for Upgrading Biogas through CO2 | 0.5 | 0 | Citations (PDF) |
| 121 | Recent Advances in Rh/CGO Co-Impregnated La0.20Sr0.25Ca0.45TiO3 Anodes for Solid Oxide Fuel Cells: Evaluation of Upscaling and Durability | 0.5 | 3 | Citations (PDF) |
| 122 | Positional influence of Ru on Perovskite structured catalysts for efficient H2 production process by heavy-hydrocarbon source | 3.6 | 15 | Citations (PDF) |
| 123 | Exsolution of Fe–Ni alloy nanoparticles from (La,Sr)(Cr,Fe,Ni)O3 perovskites as potential oxygen transport membrane catalysts for methane reforming | 6.7 | 84 | Citations (PDF) |
| 124 | Simultaneous CO2 removal from biomass conversion product gas and carbon nanotube formation via catalytic chemical vapour deposition | 2.9 | 4 | Citations (PDF) |
| 125 | Room temperature demonstration of a sodium superionic conductor with grain conductivity in excess of 0.01 S cm−1 and its primary applications in symmetric battery cells | 6.7 | 220 | Citations (PDF) |
| 126 | Electrical reduction of perovskite electrodes for accelerating exsolution of nanoparticles | 4.1 | 44 | Citations (PDF) |
| 127 | Boosting photocatalytic oxidation on graphitic carbon nitride for efficient photocatalysis by heterojunction with graphitic carbon units | 8.6 | 52 | Citations (PDF) |
| 128 | Preparation and Testing of Metal/Ce0.80Gd0.20O1.90(Metal: Ni, Pd, Pt, Rh, Ru) Co-Impregnated La0.20Sr0.25Ca0.45TiO3Anode Microstructures for Solid Oxide Fuel Cells | 2.2 | 18 | Citations (PDF) |
| 129 | Homogeneous Doping of Substitutional Nitrogen/Carbon in TiO2 Plates for Visible Light Photocatalytic Water Oxidation | 11.9 | 73 | Citations (PDF) |
| 130 | Lattice strain-enhanced exsolution of nanoparticles in thin films | 10.8 | 187 | Citations (PDF) |
| 131 | Enhanced carbon dioxide electrolysis at redox manipulated interfaces | 10.8 | 99 | Citations (PDF) |
| 132 | Investigation of solid base catalysts for biodiesel production from fish oil | 6.2 | 48 | Citations (PDF) |
| 133 | Hexagonal perovskite related oxide ion conductor Ba3NbMoO8.5: phase transition, temperature evolution of the local structure and properties | 6.7 | 39 | Citations (PDF) |
| 134 | Nanostructured carbons containing FeNi/NiFe2O4 supported over N-doped carbon nanofibers for oxygen reduction and evolution reactions | 4.0 | 17 | Citations (PDF) |
| 135 | A B-site doped perovskite ferrate as an efficient anode of a solid oxide fuel cell with in situ metal exsolution | 6.7 | 55 | Citations (PDF) |
| 136 | Layered lithium niobium (III) oxide—LiNbO2 as a visible-light-driven photocatalyst for H2 evolution | 2.9 | 3 | Citations (PDF) |
| 137 | Control of Spatially Homogeneous Distribution of Heteroatoms to Produce Red TiO2 Photocatalyst for Visible‐Light Photocatalytic Water Splitting | 2.4 | 34 | Citations (PDF) |
| 138 | Mechanism of enhanced performance on a hybrid direct carbon fuel cell using sawdust biofuels | 6.1 | 28 | Citations (PDF) |
| 139 | Experimental and modeling study of high performance direct carbon solid oxide fuel cell with in situ catalytic steam-carbon gasification reaction | 6.1 | 47 | Citations (PDF) |
| 140 | Performance improvement of a direct carbon solid oxide fuel cell through integrating an Otto heat engine | 8.5 | 34 | Citations (PDF) |
| 141 | Highly dense and chemically stable proton conducting electrolyte sintered at 1200 °C | 6.6 | 55 | Citations (PDF) |
| 142 | Nanocrystalline CeO2−δ coated β-MnO2 nanorods with enhanced oxygen transfer property | 5.1 | 26 | Citations (PDF) |
| 143 | Microstructure dependence of performance degradation for intermediate temperature solid oxide fuel cells based on the metallic catalyst infiltrated La- and Ca-doped SrTiO3 anode support | 6.7 | 15 | Citations (PDF) |
| 144 | A novel in situ diffusion strategy to fabricate high performance cathodes for low temperature proton-conducting solid oxide fuel cells | 6.7 | 43 | Citations (PDF) |
| 145 | Substitutional Carbon‐Modified Anatase TiO2 Decahedral Plates Directly Derived from Titanium Oxalate Crystals via Topotactic Transition | 17.5 | 51 | Citations (PDF) |
| 146 | Synthesis and applications of nanoporous perovskite metal oxides | 5.3 | 186 | Citations (PDF) |
| 147 | Microplasma-assisted electrochemical synthesis of Co3O4nanoparticles in absolute ethanol for energy applications | 7.6 | 43 | Citations (PDF) |
| 148 | Maximizing the visible light photoelectrochemical activity of B/N-doped anatase TiO2 microspheres with exposed dominant {001} facets | 5.1 | 25 | Citations (PDF) |
| 149 | Electrodeposited NiCu bimetal on carbon paper as stable non-noble anode for efficient electrooxidation of ammonia | 14.8 | 245 | Citations (PDF) |
| 150 | Electrochemical properties of composite cathodes using Sm doped layered perovskite for intermediate temperature-operating solid oxide fuel cell | 5.1 | 15 | Citations (PDF) |
| 151 | Metal-oxide interactions for infiltrated Ni nanoparticles on A-site deficient LaxSr1−3x/2TiO3 | 2.6 | 15 | Citations (PDF) |
| 152 | Scaling up aqueous processing of A-site deficient strontium titanate for SOFC anode supports | 5.2 | 5 | Citations (PDF) |
| 153 | Transition Metal Chlorides NiCl2, KNiCl3, Li6VCl8and Li2MnCl4as Alternative Cathode Materials in Primary Li Thermal Batteries | 2.2 | 37 | Citations (PDF) |
| 154 | Improved electrochemical performance of LiCoPO4 using eco-friendly aqueous binders | 6.1 | 22 | Citations (PDF) |
| 155 | Analytical solution to heat transfer in compressible laminar flow in a flat minichannel | 4.9 | 9 | Citations (PDF) |
| 156 | Interface formation and Mn segregation of directly assembled La0.8Sr0.2MnO3 cathode on Y2O3-ZrO2 and Gd2O3-CeO2 electrolytes of solid oxide fuel cells | 2.6 | 24 | Citations (PDF) |
| 157 | Cr- and Ti-Based Spinels as Materials for Anodic Catalyst Support in PEM Electrolysis Cells: Assessing Corrosion Stability and Support Role in Catalyst Activity of Corrosion Stable Ceramics | 0.5 | 2 | Citations (PDF) |
| 158 | Framing policy on low emissions vehicles in terms of economic gains: Might the most straightforward gain be delivered by supply chain activity to support refuelling? | 6.2 | 12 | Citations (PDF) |
| 159 | Probing the structure–property–composition relationship in organic–inorganic tri-halide perovskites | 2.0 | 2 | Citations (PDF) |
| 160 | Image analysis of the porous yttria-stabilized zirconia (YSZ) structure for a lanthanum ferrite-impregnated solid oxide fuel cell (SOFC) electrode | 5.2 | 20 | Citations (PDF) |
| 161 | Tailoring SOFC Electrode Microstructures for Improved Performance | 16.3 | 251 | Citations (PDF) |
| 162 | Sulfur-Tolerant, Exsolved Fe–Ni Alloy Nanoparticles for CO Oxidation | 2.2 | 51 | Citations (PDF) |
| 163 | Role of lattice distortion and A site cation in the phase transitions of methylammonium lead halide perovskites | 1.8 | 26 | Citations (PDF) |
| 164 | Corn-cob like nanofibres as cathode catalysts for an effective microstructure design in solid oxide fuel cells | 6.7 | 47 | Citations (PDF) |
| 165 | Spinel-based coatings for metal supported solid oxide fuel cells | 4.6 | 22 | Citations (PDF) |
| 166 | Direct methane solid oxide fuel cells based on catalytic partial oxidation enabling complete coking tolerance of Ni-based anodes | 6.1 | 57 | Citations (PDF) |
| 167 | Cellulose II as bioethanol feedstock and its advantages over native cellulose | 13.1 | 107 | Citations (PDF) |
| 168 | Robust doped BaCeO3-δ electrolyte for IT-SOFCs | 2.2 | 19 | Citations (PDF) |
| 169 | Investigation of the Relationship between the Structure and Conductivity of the Novel Oxide Ionic Conductor Ba3MoNbO8.5 | 4.6 | 55 | Citations (PDF) |
| 170 | Challenges in developing direct carbon fuel cells | 32.1 | 190 | Citations (PDF) |
| 171 | Development of Robust Metal‐Supported SOFCs and Stack Components in EU METSAPP Consortium | 1.8 | 23 | Citations (PDF) |
| 172 | In‐Situ Thermal Battery Discharge using NiS2 as a Cathode Material | 3.2 | 35 | Citations (PDF) |
| 173 | Novel layered perovskite SmBaMn 2 O 5+δ for SOFCs anode material | 1.8 | 20 | Citations (PDF) |
| 174 | Electrochemical performance of different carbon fuels on a hybrid direct carbon fuel cell | 6.6 | 28 | Citations (PDF) |
| 175 | Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures | 10.8 | 289 | Citations (PDF) |
| 176 | Modification of LSCM–GDC cathodes to enhance performance for high temperature CO2 electrolysis using solid oxide electrolysis cells (SOECs) | 6.7 | 88 | Citations (PDF) |
| 177 | Mixing regime simulation and cellulose particle tracing in a stacked frame photocatalytic reactor | 8.6 | 9 | Citations (PDF) |
| 178 | Highly dense and novel proton conducting materials for SOFC electrolyte | 6.6 | 59 | Citations (PDF) |
| 179 | NdBaMn2O5+δ layered perovskite as an active cathode material for solid oxide fuel cells | 4.3 | 22 | Citations (PDF) |
| 180 | Development and Testing of Impregnated La0.20Sr0.25Ca0.45TiO3Anode Microstructures for Solid Oxide Fuel Cells | 0.5 | 6 | Citations (PDF) |
| 181 | Charge carrier localised in zero-dimensional (CH3NH3)3Bi2I9 clusters | 10.8 | 79 | Citations (PDF) |
| 182 | La and Ca-Doped A-Site Deficient Strontium Titanates Anode for Electrolyte Supported Direct Methane Solid Oxide Fuel Cell | 2.2 | 18 | Citations (PDF) |
| 183 | Promoting photocatalytic H2 evolution by tuning cation deficiency in La and Cr co-doped SrTiO3 | 2.4 | 36 | Citations (PDF) |
| 184 | Demonstration of chemistry at a point through restructuring and catalytic activation at anchored nanoparticles | 10.8 | 159 | Citations (PDF) |
| 185 | Zero-dimensional methylammonium iodo bismuthate solar cells and synergistic interactions with silicon nanocrystals | 3.6 | 33 | Citations (PDF) |
| 186 | Infiltrated La0.4Sr0.4Fe0.03Ni0.03Ti0.94O3 based anodes for all ceramic and metal supported solid oxide fuel cells | 6.1 | 35 | Citations (PDF) |
| 187 | Comparative assessment of visible light and UV active photocatalysts by hydroxyl radical quantification | 3.5 | 100 | Citations (PDF) |
| 188 | Electrocatalytic ammonia synthesis via a proton conducting oxide cell with BaCe 0.5 Zr 0.3 Y 0.16 Zn 0.04 O 3-δ electrolyte membrane | 3.8 | 46 | Citations (PDF) |
| 189 | Electrochemical properties and durability of in-situ composite cathodes with SmBa0.5Sr0.5Co2O5+δ for metal supported solid oxide fuel cells | 6.6 | 18 | Citations (PDF) |
| 190 | Impact of the annealing temperature on Pt/g-C 3 N 4 structure, activity and selectivity between photodegradation and water splitting | 3.8 | 81 | Citations (PDF) |
| 191 | A Novel LiTi2O4-XCx As Li-Ion Battery Anode Material | 0.0 | 0 | Citations (PDF) |
| 192 | Innovative Approach on Nano-Metal Particles of Electrodes for Solid Oxide Cells | 0.0 | 0 | Citations (PDF) |
| 193 | Development and Testing of Impregnated La0.20Sr0.25Ca0.45TiO3 Anode Microstructures for Solid Oxide Fuel Cells | 0.0 | 0 | Citations (PDF) |
| 194 | (Invited) Electrode Evolution in Solid Oxide Cells | 0.0 | 0 | Citations (PDF) |
| 195 | Probing the energy levels of perovskite solar cells via Kelvin probe and UV ambient pressure photoemission spectroscopy | 2.0 | 112 | Citations (PDF) |
| 196 | Oxide Ion Conductivity in the Hexagonal Perovskite Derivative Ba3MoNbO8.5 | 11.7 | 143 | Citations (PDF) |
| 197 | Modeling of CH4-assisted SOEC for H2O/CO2 co-electrolysis | 6.6 | 105 | Citations (PDF) |
| 198 | Comparative study of durability of hybrid direct carbon fuel cells with anthracite coal and bituminous coal | 6.6 | 26 | Citations (PDF) |
| 199 | In Situ Growth of Nanoparticles in Layered Perovskite La0.8Sr1.2Fe0.9Co0.1O4−δ as an Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells | 4.6 | 174 | Citations (PDF) |
| 200 | Inorganic perovskite photocatalysts for solar energy utilization | 32.1 | 540 | Citations (PDF) |
| 201 | Role of coal characteristics in the electrochemical behaviour of hybrid direct carbon fuel cells | 22.1 | 47 | Citations (PDF) |
| 202 | A perspective on liquid salts for energy and materials | 2.6 | 5 | Citations (PDF) |
| 203 | Switching on electrocatalytic activity in solid oxide cells | 30.6 | 582 | Citations (PDF) |
| 204 | Zirconium Trisulfide as a Promising Cathode Material for Li Primary Thermal Batteries | 2.2 | 38 | Citations (PDF) |
| 205 | Smart utilization of cobaltite-based double perovskite cathodes on barrier-layer-free zirconia electrolyte of solid oxide fuel cells | 6.7 | 56 | Citations (PDF) |
| 206 | Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers | 45.2 | 728 | Citations (PDF) |
| 207 | La
1
.7
Ca
0.3
Ni
0.75
Cu
0.25
O
4‐δ
‐Layered Perovskite as Cathode on La
0.9
Sr
0.1
Ga
0.8
Mg
0.2
O
3
| 1.9 | 12 | Citations (PDF) |
| 208 | Development of novel anode material for intermediate temperature SOFC (IT-SOFC) | 6.7 | 57 | Citations (PDF) |
| 209 | Demonstration of high performance in a perovskite oxide supported solid oxide fuel cell based on La and Ca co-doped SrTiO3 | 6.7 | 55 | Citations (PDF) |
| 210 | Enhanced Photocatalytic H2 Production in Core–Shell Engineered Rutile TiO2 | 17.5 | 197 | Citations (PDF) |
| 211 | Flux investigations on composite (La0.8Sr0.2)0.95Cr0.5Fe0.5O3−δ–Sc0.198Ce0.012Zr0.789O1.90 oxygen transport membranes | 2.6 | 10 | Citations (PDF) |
| 212 | Simultaneous cellulose conversion and hydrogen production assisted by cellulose decomposition under UV-light photocatalysis | 2.4 | 121 | Citations (PDF) |
| 213 | Studies on the crystal structure, magnetic and conductivity properties of titanium oxycarbide solid solution (TiO1−xCx) | 6.7 | 49 | Citations (PDF) |
| 214 | Energy band diagram of device-grade silicon nanocrystals | 3.6 | 22 | Citations (PDF) |
| 215 | Application of infiltrated LSCM–GDC oxide anode in direct carbon/coal fuel cells | 2.6 | 22 | Citations (PDF) |
| 216 | Studies of current collection configurations and sealing for tubular hybrid-DCFC | 6.6 | 9 | Citations (PDF) |
| 217 | The application of a novel fluidised photo reactor under UV–Visible and natural solar irradiation in the photocatalytic generation of hydrogen | 8.6 | 43 | Citations (PDF) |
| 218 | Characterization of Pb- and Ca-doped Bi2+xSr2−xCuO6+δ | 1.9 | 1 | Citations (PDF) |
| 219 | (Invited) Studies of Hydride Ion Conduction | 0.0 | 0 | Citations (PDF) |
| 220 | Addition of Protonic Conductors to Enhance SOFC Anode Performance | 0.0 | 0 | Citations (PDF) |
| 221 | Short Stack and Full System Test Using a Ceramic A‐Site Deficient Strontium Titanate Anode | 1.8 | 22 | Citations (PDF) |
| 222 | Image Analysis and Modeling of the Orientation of Pores in a Constrained Film on a Rigid Substrate | 3.1 | 6 | Citations (PDF) |
| 223 | Hierarchically nanoporous La1.7Ca0.3CuO4−δ and La1.7Ca0.3NixCu1−xO4−δ (0.25 ≤ x ≤ 0.75) as potential cathode materials for IT-SOFCs | 6.7 | 42 | Citations (PDF) |
| 224 | Nano-composite structural Ni–Sn alloy anodes for high performance and durability of direct methane-fueled SOFCs | 6.7 | 52 | Citations (PDF) |
| 225 | Oxygen storage capacity and thermal stability of the CuMnO2–CeO2 composite system | 6.7 | 45 | Citations (PDF) |
| 226 | Fine-tuning B-site of a Chromite based Perovskite Catalyst for Steam Reforming of Glycerol | 0.1 | 0 | Citations (PDF) |
| 227 | Organic Semiconductor g‐C3N4 Modified TiO2 Nanotube Arrays for Enhanced Photoelectrochemical Performance in Wastewater Treatment | 2.4 | 44 | Citations (PDF) |
| 228 | Evidence and Model for Strain-Driven Release of Metal Nanocatalysts from Perovskites during Exsolution | 2.9 | 169 | Citations (PDF) |
| 229 | A 60-Second Microwave-Assisted Synthesis of Nickel Foam and Its Application to the Impregnation of Porous Scaffolds | 2.2 | 10 | Citations (PDF) |
| 230 | A Case Study Analysis of System Efficiency, Viability and Energy Values of SOFC Based Fuel Cell Micro-CHP for Office Buildings | 0.5 | 1 | Citations (PDF) |
| 231 | Study on Direct Flame Solid Oxide Fuel Cell Using Flat Burner and Ethylene Flame | 0.5 | 14 | Citations (PDF) |
| 232 | Macro-mesoporous resorcinol–formaldehyde polymer resins as amorphous metal-free visible light photocatalysts | 6.7 | 73 | Citations (PDF) |
| 233 | Enhancement of redox stability and electrical conductivity by doping various metals on ceria, Ce 1−x M x O 2−δ (M = Ni, Cu, Co, Mn, Ti, Zr) | 6.6 | 51 | Citations (PDF) |
| 234 | Structural Investigation of Graphitic Carbon Nitride via XRD and Neutron Diffraction | 4.6 | 926 | Citations (PDF) |
| 235 | Ce(Mn,Fe)O2–(La,Sr)(Fe,Mn)O3 composite as an active cathode for electrochemical reduction of CO2 in proton conducting solid oxide cells | 2.6 | 25 | Citations (PDF) |
| 236 | Crystal structure of A-site deficient La0.2Sr0.7−xCaxTiO3 perovskite at ambient conditions and high temperatures: a neutron powder diffraction study | 2.3 | 3 | Citations (PDF) |
| 237 | Facile structure design based on C3N4for mediator-free Z-scheme water splitting under visible light | 2.9 | 97 | Citations (PDF) |
| 238 | The effect of Pt NPs crystallinity and distribution on the photocatalytic activity of Pt–g-C3N4 | 2.0 | 100 | Citations (PDF) |
| 239 | Oxygen deficient layered double perovskite as an active cathode for CO2 electrolysis using a solid oxide conductor | 2.6 | 95 | Citations (PDF) |
| 240 | Calcium manganite as oxygen electrode materials for reversible solid oxide fuel cell | 2.6 | 28 | Citations (PDF) |
| 241 | H2FC SUPERGEN: An overview of the Hydrogen and Fuel Cell research across the UK | 6.6 | 26 | Citations (PDF) |
| 242 | Nano-socketed nickel particles with enhanced coking resistance grown in situ by redox exsolution | 10.8 | 880 | Citations (PDF) |
| 243 | In Situ Tailored Nickel Nano-Catalyst Layer for Internal Reforming Hydrocarbon Fueled SOFCs | 0.5 | 4 | Citations (PDF) |
| 244 | Development of Tailored Porous Microstructures for Infiltrated Catalyst Electrodes by Aqueous Tape Casting Methods | 0.5 | 8 | Citations (PDF) |
| 245 | Highly efficient, coking-resistant SOFCs for energy conversion using biogas fuels | 6.7 | 46 | Citations (PDF) |
| 246 | Electrochemical Impedance Spectroscopy Investigation of the Anodic Functionalities and Processes in LSCM-CGO-Ni Systems | 0.5 | 6 | Citations (PDF) |
| 247 | Application of Exsolved Structures as a Route to More Robust Anodes for Improved Biogas Utilisation in SOFCs | 0.5 | 6 | Citations (PDF) |
| 248 | Screen Printed Porous La0.20Sr0.25Ca0.45TiO3 Fuel Electrode Scaffold Microstructures: Optimisation of Interaction with Impregnated Catalysts for More Durable Performance | 0.5 | 9 | Citations (PDF) |
| 249 | Utilisation of Coal in Direct Carbon Fuel Cells | 0.5 | 2 | Citations (PDF) |
| 250 | Understanding of CO2 Electrochemical Reduction Reaction Process via High Temperature Solid Oxide Electrolysers | 0.5 | 7 | Citations (PDF) |
| 251 | Synthesis and characterization of B-site doped La 0.20 Sr 0.25 Ca 0.45 TiO 3 as SOFC anode materials | 6.6 | 36 | Citations (PDF) |
| 252 | Modified strontium titanates: from defect chemistry to SOFC anodes | 4.0 | 86 | Citations (PDF) |
| 253 | Synthesis and lithium-storage properties of MnO/reduced graphene oxide composites derived from graphene oxide plus the transformation of Mn(vi) to Mn(ii) by the reducing power of graphene oxide | 6.7 | 69 | Citations (PDF) |
| 254 | Wetting and interactions of Ag–Cu–Ti and Ag–Cu–Ni alloys with ceramic and steel substrates for use as sealing materials in a DCFC stack | 2.8 | 22 | Citations (PDF) |
| 255 | Understanding of CO2 Electrochemical Reduction Reaction Process via High Temperature Solid Oxide Electrolysers | 0.0 | 0 | Citations (PDF) |
| 256 | In Situ Tailored Nickel Nano-Catalyst Layer for Internal Reforming Hydrocarbon Fueled SOFCs | 0.0 | 0 | Citations (PDF) |
| 257 | Study on Direct Flame Solid Oxide Fuel Cell Using Flat Burner and Ethylene Flame | 0.0 | 0 | Citations (PDF) |
| 258 | Development of Tailored Porous Microstructures for Infiltrated Catalyst Electrodes by Aqueous Tape Casting Methods | 0.0 | 0 | Citations (PDF) |
| 259 | Electrochemical Impedance Spectroscopy Investigation of the Anodic Functionalities and Processes in LSCM-CGO-Ni Systems | 0.0 | 1 | Citations (PDF) |
| 260 | Performance of Direct Carbon Fuel Cells Operated on Coal and Effect of Operation Mode | 2.2 | 40 | Citations (PDF) |
| 261 | Application of Ternary Carbonate in Hybrid Direct Coal Fuel Cells | 0.5 | 7 | Citations (PDF) |
| 262 | Structural, electrochemical and magnetic characterization of the layered-type PrBa0.5Sr0.5Co2O5+δ perovskite | 2.4 | 19 | Citations (PDF) |
| 263 | X-ray photoelectron spectroscopy of Sm-doped layered perovskite for intermediate temperature-operating solid oxide fuel cell | 5.1 | 47 | Citations (PDF) |
| 264 | Simulated Biogas for Nickel-Based Solid Oxide Fuel Cells | 0.5 | 0 | Citations (PDF) |
| 265 | Influence of atmosphere on redox structure of BaCe 0.9 Y 0.1 O 2.95 – Insight from neutron diffraction study | 6.6 | 46 | Citations (PDF) |
| 266 | Structure and properties of MgMxCr2−xO4 (M = Li, Mg, Ti, Fe, Cu, Ga) spinels for electrode supports in solid oxide fuel cells | 6.7 | 23 | Citations (PDF) |
| 267 | Fabrication and characterisation of a large-area solid oxide fuel cell based on dual tape cast YSZ electrode skeleton supported YSZ electrolytes with vanadate and ferrite perovskite-impregnated anodes and cathodes | 6.7 | 42 | Citations (PDF) |
| 268 | Uniformly dispersed CdS/CdSe quantum dots co-sensitized TiO2 nanotube arrays with high photocatalytic property under visible light | 1.8 | 19 | Citations (PDF) |
| 269 | Layered oxygen-deficient double perovskite as an efficient and stable anode for direct hydrocarbon solid oxide fuel cells | 23.7 | 730 | Citations (PDF) |
| 270 | High H− ionic conductivity in barium hydride | 23.7 | 139 | Citations (PDF) |
| 271 | Simulated Biogas for Nickel-Based Solid Oxide Fuel Cells | 0.0 | 0 | Citations (PDF) |
| 272 | Hybrid Direct Carbon Fuel Cells with Different Types of Mineral Coal | 0.5 | 15 | Citations (PDF) |
| 273 | Synthesis and Electrochemical Characterization of T* La0.84Sm0.96Sr0.2CuO4 as a Cathode Material for IT-SOFC | 0.5 | 0 | Citations (PDF) |
| 274 | In situ growth of nanoparticles through control of non-stoichiometry | 15.5 | 1,076 | Citations (PDF) |
| 275 | Improving the Performance of SOFC Anodes by Decorating Perovskite with Ni Nanoparticles | 0.5 | 2 | Citations (PDF) |
| 276 | Microstructural Engineering of SOFC and SOEC Electrode Interfaces | 0.5 | 1 | Citations (PDF) |
| 277 | Controllable Impregnation Via Inkjet Printing for the Fabrication of Solid Oxide Cell Air Electrodes | 0.5 | 12 | Citations (PDF) |
| 278 | A Solid Oxide Fuel Cell with Lanthanum and Calcium Co-Doped Strontium Titanate as Support | 0.5 | 4 | Citations (PDF) |
| 279 | Calculation of a Standard Reformed Biogas Composition and Testing on SOFC Anode Powders | 0.5 | 2 | Citations (PDF) |
| 280 | Lithium Iron Oxide – An Anode Material for Intermediate Temperature Solid Oxide Fuel Cell | 0.5 | 0 | Citations (PDF) |
| 281 | An investigation of crystal structure, surface area and surface chemistry of strontium niobate and their influence on photocatalytic performance | 2.3 | 19 | Citations (PDF) |
| 282 | Development and performance of MgFeCrO4 – based electrodes for solid oxide fuel cells | 6.7 | 11 | Citations (PDF) |
| 283 | Preparation via a solution method of La0.2Sr0.25Ca0.45TiO3 and its characterization for anode supported solid oxide fuel cells | 6.7 | 37 | Citations (PDF) |
| 284 | Ca-substituted, A-site deficient perovskite La0.2Sr0.7TiO3 as a potential anode material for SOFCs | 6.7 | 66 | Citations (PDF) |
| 285 | Full Ceramic Fuel Cells Based on Strontium Titanate Anodes, an Approach towards More Robust SOFCs | 0.5 | 10 | Citations (PDF) |
| 286 | Photocatalytic H2 generation from spinels ZnFe2O4, ZnFeGaO4 and ZnGa2O4 | 3.8 | 105 | Citations (PDF) |
| 287 | Spin–glass transition in La0.75Sr0.25Mn0.5Cr0.5−xAlxO3−δ perovskites | 4.6 | 7 | Citations (PDF) |
| 288 | Pre-coating of LSCM perovskite with metal catalyst for scalable high performance anodes | 6.6 | 34 | Citations (PDF) |
| 289 | Fabrication of anode-supported zirconia thin film electrolyte based core–shell particle structure for intermediate temperature solid oxide fuel cells | 5.1 | 5 | Citations (PDF) |
| 290 | Synthesis of ammonia directly from air and water at ambient temperature and pressure | 2.7 | 390 | Citations (PDF) |
| 291 | Remarkable transition from rocksalt/perovskite layered structure to fluorite/rocksalt layered structure in rapidly cooled Ln2CuO4 | 2.7 | 4 | Citations (PDF) |
| 292 | Scaling up of the hybrid direct carbon fuel cell technology | 6.6 | 29 | Citations (PDF) |
| 293 | Development and Performance of MnFeCrO4‐Based Electrodes for Solid Oxide Fuel Cells | 16.3 | 25 | Citations (PDF) |
| 294 | Carbon-Fuelled Solid Oxide Cells for Military Applications | 0.5 | 2 | Citations (PDF) |
| 295 | Scale Up and Anode Development for
La
‐Doped
SrTiO
3
Anode‐Supported
SOFC
s | 3.1 | 37 | Citations (PDF) |
| 296 | Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants | 22.1 | 345 | Citations (PDF) |
| 297 | Evaluation of Ca Doped La0.2Sr0.7TiO3as an Alternative Material for Use in SOFC Anodes | 2.2 | 59 | Citations (PDF) |
| 298 | Impedance Studies on LSCM∕GDC Cathode for High Temperature CO2 Electrolysis | 2.3 | 69 | Citations (PDF) |
| 299 | Impedance Studies on LSCM/GDC Composite Cathode for High Temperature CO2 Electrolysis | 0.5 | 8 | Citations (PDF) |
| 300 | Alternative Cathode Material for CO2Reduction by High Temperature Solid Oxide Electrolysis Cells | 2.2 | 152 | Citations (PDF) |
| 301 | Composite Oxygen Electrode Based on LSCM for Steam Electrolysis in a Proton Conducting Solid Oxide Electrolyzer | 2.2 | 85 | Citations (PDF) |
| 302 | The catalytic effect of impregnated (La, Sr)(Ti, Mn)O3±δ with CeO2 and Pd as potential anode materials in high temperature solid oxide fuel cells | 6.6 | 14 | Citations (PDF) |
| 303 | (La,Sr)(Cr,Mn)O3/GDC cathode for high temperature steam electrolysis and steam-carbon dioxide co-electrolysis | 2.6 | 106 | Citations (PDF) |
| 304 | Demonstration of high power, direct conversion of waste-derived carbon in a hybrid direct carbon fuel cell | 22.1 | 136 | Citations (PDF) |
| 305 | A red metallic oxide photocatalyst | 23.7 | 466 | Citations (PDF) |
| 306 | Modeling a Reversible Solid Oxide Fuel Cell as a Storage Device Within AC Power Networks | 1.8 | 28 | Citations (PDF) |
| 307 | Directly Imaging Interstitial Oxygen in Silicate Apatite | 16.3 | 38 | Citations (PDF) |
| 308 | Ammonia and related chemicals as potential indirect hydrogen storage materials | 6.6 | 1,172 | Citations (PDF) |
| 309 | Characterization of layered perovskite oxides NdBa1−xSrxCo2O5+δ (x = 0 and 0.5) as cathode materials for IT-SOFC | 6.6 | 92 | Citations (PDF) |
| 310 | On the Existence of A‐Site Deficiency in Perovskites and Its Relation to the Electrochemical Performance | 17.5 | 113 | Citations (PDF) |
| 311 | Characterisation of conductivity of the (Ce xY0.2-x)Sc0.6 Zr3.2O8-δ (0 < x < 0.2) system and composition Ce0.04Y0.02Sc0.67Zr3.27O 7.66 as function of time | 0.5 | 0 | Citations (PDF) |
| 312 | Impedance Spectroscopy of Ferromagnetic Materials | 0.1 | 0 | Citations (PDF) |
| 313 | Studies on the perovskite-based La4Srn−4TinO3n+2 | 0.1 | 1 | Citations (PDF) |
| 314 | Structure, conductivity and redox reversibility of Ca-doped cerium metavanadate | 7.3 | 18 | Citations (PDF) |
| 315 | Novel redox reversible oxide, Sr-doped cerium orthovanadate to metavanadate | 7.3 | 26 | Citations (PDF) |
| 316 | Direct synthesis of methane from CO2/H2O in an oxygen-ion conducting solid oxide electrolyser | 22.1 | 190 | Citations (PDF) |
| 317 | Electrochemical reduction of CO2 in a proton conducting solid oxide electrolyser | 7.3 | 129 | Citations (PDF) |
| 318 | Symmetric and reversible solid oxide fuel cells | 4.0 | 259 | Citations (PDF) |
| 319 | Structural Disorder in Doped Zirconias, Part I: The Zr0.8Sc0.2−xYxO1.9 (0.0 ≤ x ≤ 0.2) System | 4.6 | 71 | Citations (PDF) |
| 320 | Investigation of Microstructural and Electrochemical Properties of Impregnated (La,Sr)(Ti,Mn)O3±δ as a Potential Anode Material in High-Temperature Solid Oxide Fuel Cells | 4.6 | 36 | Citations (PDF) |
| 321 | The role of defect chemistry in strontium titanates utilised for high temperature steam electrolysis | 7.3 | 93 | Citations (PDF) |
| 322 | In Situ High-Temperature Neutron Diffraction Study of A-Site Deficient Perovskites with Transition Metals on the B-Sublattice and Structure−Conductivity Correlation | 4.6 | 21 | Citations (PDF) |
| 323 | Enhancing Electronic Conductivity in Strontium Titanates through Correlated A and B-Site Doping | 4.6 | 103 | Citations (PDF) |
| 324 | Red-ox behaviour in the La0.6Sr0.4CoO3±δ-CeO2 system | 7.3 | 14 | Citations (PDF) |
| 325 | NbTi0.5Ni0.5O4 as anode compound material for SOFCs | 2.6 | 22 | Citations (PDF) |
| 326 | g-C3N4 coated SrTiO3 as an efficient photocatalyst for H2 production in aqueous solution under visible light irradiation | 6.6 | 238 | Citations (PDF) |
| 327 | Synthesis and characterization of chromium spinels as potential electrode support materials for intermediate temperature solid oxide fuel cells | 2.8 | 38 | Citations (PDF) |
| 328 | The La0.95Ni0.6Fe0.4O3–CeO2 system: Phase equilibria, crystal structure of components and transport properties | 2.4 | 6 | Citations (PDF) |
| 329 | Recent Progress in the Development of Anode Materials for Solid Oxide Fuel Cells | 16.3 | 360 | Citations (PDF) |
| 330 | Catalysis and oxidation of carbon in a hybrid direct carbon fuel cell | 6.1 | 72 | Citations (PDF) |
| 331 | B-site doping of lanthanum strontium titanate for solid oxide fuel cell anodes | 6.1 | 87 | Citations (PDF) |
| 332 | Optimisation of the Solid Oxide Fuel Cell (SOFC) cathode material Ca3Co4O9−δ | 6.1 | 38 | Citations (PDF) |
| 333 | Structure–property relationship in layered perovskite cathode LnBa0.5Sr0.5Co2O5+δ (Ln=Pr, Nd) for solid oxide fuel cells | 6.1 | 55 | Citations (PDF) |
| 334 | Order and disorder in Ca2ND0.90H0.10–A structural and thermal study | 2.4 | 12 | Citations (PDF) |
| 335 | Transport properties of multi-cations doped cerium oxide | 2.6 | 12 | Citations (PDF) |
| 336 | 8YSZ/(La0.8Sr0.2)0.95MnO3–δ cathode performance at 1–3bar oxygen pressures | 2.6 | 9 | Citations (PDF) |
| 337 | Characterization of YSr2Fe3O8−δ as electrode materials for SOFC | 2.6 | 23 | Citations (PDF) |
| 338 | A structural study of the proton conducting B-site ordered perovskite Ba3Ca1.18Ta1.82O8.73 | 1.6 | 11 | Citations (PDF) |
| 339 | Thermal Cycling Evaluation of Rolled Tubular Solid Oxide Fuel Cells | 0.8 | 6 | Citations (PDF) |
| 340 | Syntheses and proton conductivity of mesoporous Nd2O3–SiO2 and NdOCl–SiO2 composites | 2.8 | 10 | Citations (PDF) |
| 341 | Development of Tubular Hybrid-DCFC | 0.0 | 0 | Citations (PDF) |
| 342 | Waste Medium Density Fiberboard (MDF) as a Fuel in Hybrid Direct Carbon Fuel Cells | 0.0 | 0 | Citations (PDF) |
| 343 | Electrochemical characteristics of cathodes based on perovskites modified by ceria | 0.5 | 5 | Citations (PDF) |
| 344 | Synthesis and characterization of (Pr0.75Sr0.25)1−xCr0.5Mn0.5O3−δ as anode for SOFCs | 2.6 | 15 | Citations (PDF) |
| 345 | Adhesion and Percolation Parameters in Two Dimensional Pd–LSCM Composites for SOFC Anode Current Collection | 11.9 | 15 | Citations (PDF) |
| 346 | A fuel cell operating between room temperature and 250°C based on a new phosphoric acid based composite electrolyte | 6.1 | 18 | Citations (PDF) |
| 347 | Proton conductivity of potassium doped barium zirconates | 2.4 | 33 | Citations (PDF) |
| 348 | Probing the superconducting ground state near the charge density wave phase transition inCu0.06TiSe2 | 2.4 | 12 | Citations (PDF) |
| 349 | Crystal Structure, Oxygen Nonstoichiometry, and Conductivity of Mixed Ionic–Electronic Conducting Perovskite Composites with CeO[sub 2] | 2.2 | 18 | Citations (PDF) |
| 350 | Design of Anode Materials for IT SOFC: Effect of Complex Oxide Promoters and Pt Group Metals on Activity and Stability in Methane Steam Reforming of Ni/YSZ (ScSZ) Cermets | 0.8 | 6 | Citations (PDF) |
| 351 | Electrochemical Investigation of Composite Cathodes with SmBa0.5Sr0.5Co2O5+δ Cathodes for Intermediate Temperature-Operating Solid Oxide Fuel Cell | 4.6 | 134 | Citations (PDF) |
| 352 | Conductivity Behavior of Composites in the La0.6Sr0.4CoO3±δ - CeO2 System: Function of Connectivity and Interfacial Interactions | 4.6 | 22 | Citations (PDF) |
| 353 | Intermediate temperature stable proton conductors based upon SnP2O7, including additional H3PO4 | 7.3 | 41 | Citations (PDF) |
| 354 | A direct urea fuel cell – power from fertiliser and waste | 22.1 | 406 | Citations (PDF) |
| 355 | Characterisation of lower temperature sintered zinc-doped barium calcium niobate proton conducting electrolytes | 7.3 | 15 | Citations (PDF) |
| 356 | Structure and Properties of La0.4Sr0.4TiO3 Ceramics for Use as Anode Materials in Solid Oxide Fuel Cells | 4.6 | 208 | Citations (PDF) |
| 357 | Synthesis and visible light photoactivity of a high temperature stable yellow TiO2 photocatalyst | 7.3 | 35 | Citations (PDF) |
| 358 | Investigation of Electrical and Mechanical Properties of Tetragonal/Cubic Composite Electrolytes Prepared by Impregnation of 8YSZ with Zirconia Solution | 0.0 | 0 | Citations (PDF) |
| 359 | SmBaCo2O5+δ and LnBa0.5Sr0.5Co2O5+δ, Potential Cathode Materials for IT-SOFC | 0.0 | 0 | Citations (PDF) |
| 360 | The Integrated Project SOFC600 Development of Low-temperature SOFC | 0.0 | 0 | Citations (PDF) |
| 361 | Intermediate Temperature SOFC Anode Component Based on A-Site Deficient La-Doped SrTiO3 | 0.0 | 0 | Citations (PDF) |
| 362 | Investigation of the Structural and Catalytic Requirements for High-Performance SOFC Anodes Formed by Infiltration of LSCM | 2.3 | 143 | Citations (PDF) |
| 363 | Intermediate Temperature SOFC Anode Component based on A-site Deficient La-doped SrTiO3 | 0.5 | 10 | Citations (PDF) |
| 364 | Investigation of Electrical and Mechanical Properties of Tetragonal/Cubic Composite Electrolytes Prepared by Impregnation of 8YSZ with Zirconia Solution | 0.5 | 1 | Citations (PDF) |
| 365 | Microstructural Studies and Performance of Impregnated Manganese Containing Perovskite Solid Oxide Fuel Cell Anodes | 0.5 | 1 | Citations (PDF) |
| 366 | Characterization of Cuprate based Cathode Structures by AC Impedance | 0.5 | 2 | Citations (PDF) |
| 367 | A Review of Progress in the UK Supergen Fuel Cell Programme | 0.5 | 2 | Citations (PDF) |
| 368 | Bulk and Grain Boundary Conductivities as Function of Temperature and Oxygen Partial Pressure of Scandia-Stabilized Zirconia Co-Doped with Yttria and Ceria | 0.5 | 5 | Citations (PDF) |
| 369 | Ni/C Slurries Based on Molten Carbonates as a Fuel for Hybrid Direct Carbon Fuel Cells | 2.2 | 74 | Citations (PDF) |
| 370 | SmBaCo2O5+d and LnBa0.5Sr0.5Co2O5+δ, Potential Cathode Materials for IT-SOFC | 0.5 | 10 | Citations (PDF) |
| 371 | Structural, magnetic and electrochemical characterization of La0.83A0.17Fe0.5Cr0.5O3−δ (A=Ba, Ca) perovskites | 4.6 | 13 | Citations (PDF) |
| 372 | Synthesis, structure and magnetic properties of Sr2Fe1−xGaxMoO6 (0≤x≤0.6) double perovskites | 4.6 | 4 | Citations (PDF) |
| 373 | Syntheses, Li Insertion, and Photoactivity of Mesoporous Crystalline TiO2 | 11.9 | 132 | Citations (PDF) |
| 374 | Proton conductivity of Al(H2PO4)3–H3PO4 composites at intermediate temperature | 2.6 | 20 | Citations (PDF) |
| 375 | Crystal structure, thermochemical stability, electrical and magnetic properties of the two-phase composites in the La0.8Sr0.2MnO3±δ–CeO2 system | 2.6 | 22 | Citations (PDF) |
| 376 | Electronic conductivity of modified La0.95Ni0.6Fe0.4O3−δ perovskites | 6.1 | 14 | Citations (PDF) |
| 377 | Structural, thermal and electrochemical properties of layered perovskite SmBaCo2O5+d, a potential cathode material for intermediate-temperature solid oxide fuel cells | 6.1 | 115 | Citations (PDF) |
| 378 | Structure, Conductivity, and Thermal Expansion Studies of Redox Stable Rutile Niobium Chromium Titanates in Oxidizing and Reducing Conditions | 4.6 | 30 | Citations (PDF) |
| 379 | Activation and Ripening of Impregnated Manganese Containing Perovskite SOFC Electrodes under Redox Cycling | 4.6 | 61 | Citations (PDF) |
| 380 | Thermochemical and Structural Stability of A- and B-Site-Substituted Perovskites in Hydrogen-Containing Atmosphere | 4.6 | 35 | Citations (PDF) |
| 381 | Reduction studies and evaluation of surface modified A-site deficient La-doped SrTiO3 as anode material for IT-SOFCs | 7.3 | 91 | Citations (PDF) |
| 382 | Mesoporous Monocrystalline TiO2 and Its Solid-State Electrochemical Properties | 4.6 | 118 | Citations (PDF) |
| 383 | Advanced Electrochemical Properties of LnBa[sub 0.5]Sr[sub 0.5]Co[sub 2]O[sub 5+δ] (Ln=Pr, Sm, and Gd) as Cathode Materials for IT-SOFC | 2.2 | 163 | Citations (PDF) |
| 384 | Location of Deuterium Positions in the Proton-Conducting Perovskite BaCe0.4Zr0.4Sc0.2O2.90·xD2O by Neutron Powder Diffraction | 4.6 | 38 | Citations (PDF) |
| 385 | Effect of Oxygen Non Stoichiometry and Oxidation State of Transition Elements on High-Temperature Phase Transition in A-Site Deficient La0.95Ni0.6Fe0.4O3−δ Perovskite | 4.6 | 37 | Citations (PDF) |
| 386 | Electrochemical performance of a hybrid direct carbon fuel cell powered by pyrolysed MDF | 22.1 | 61 | Citations (PDF) |
| 387 | Structural and electrical properties of calcium and strontium hydrides | 7.3 | 82 | Citations (PDF) |
| 388 | The Integrated Project SOFC600 Development of Low-temperature SOFC | 0.5 | 7 | Citations (PDF) |
| 389 | Preparation and characterization of copper based cermet anodes for use in solid oxide fuel cells at intermediate temperatures | 1.3 | 15 | Citations (PDF) |
| 390 | Characterisation of Cuprate Based Cathode Structures by AC Impedance | 0.0 | 0 | Citations (PDF) |
| 391 | Bulk and Grain Boundary Conductivities as Function of Temperature and Oxygen Partial Pressure of Scandia-stabilized Zirconia Co-doped with Yttria and Ceria | 0.0 | 0 | Citations (PDF) |
| 392 | Zirconia EB-PVD Electrolyte Films: Structure, Mechanical Properties and Conductivity | 0.0 | 0 | Citations (PDF) |
| 393 | Solid state electrochemistry of direct carbon/air fuel cells | 0.1 | 11 | Citations (PDF) |
| 394 | Effect of complex oxide promoters and Pd on activity and stability of Ni/YSZ (ScSZ) cermets as anode materials for IT SOFC | 3.8 | 20 | Citations (PDF) |
| 395 | Ce-substituted LSCM as new anode material for SOFC operating in dry methane | 2.6 | 52 | Citations (PDF) |
| 396 | Electrical conductivity and structure of solid solutions formed in the La0.8Sr0.2MnO3–La0.95Ni0.6Fe0.4O3 system | 2.6 | 6 | Citations (PDF) |
| 397 | Solid state electrochemistry of direct carbon/air fuel cells | 2.6 | 83 | Citations (PDF) |
| 398 | Structural and electrochemical properties of the perovskite oxide Pr0.7Sr0.3Cr0.9Ni0.1O3−δ | 2.6 | 17 | Citations (PDF) |
| 399 | High density and low temperature sintered proton conductor BaCe0.5Zr0.35Sc0.1Zn0.05O3–δ | 2.6 | 67 | Citations (PDF) |
| 400 | Structural origins of the differing grain conductivity values in BaZr0.9Y0.1O2.95 and indication of novel approach to counter defect association | 7.3 | 97 | Citations (PDF) |
| 401 | Is YSZ stable in the presence of Cu? | 7.3 | 27 | Citations (PDF) |
| 402 | Electrochemical oxidation of solid carbon in hybrid DCFC with solid oxide and molten carbonate binary electrolyte | 22.1 | 146 | Citations (PDF) |
| 403 | Engineering Composite Oxide SOFC Anodes for Efficient Oxidation of Methane | 2.3 | 132 | Citations (PDF) |
| 404 | Production of high conductivity composite zirconia solid oxide electrolytes with good mechanical strength through net-shape | 7.3 | 10 | Citations (PDF) |
| 405 | (La0.75Sr0.25)0.95Mn0.5Cr0.5O3 as the cathode of solid oxide electrolysis cells for high temperature hydrogen production from steam | 7.3 | 176 | Citations (PDF) |
| 406 | Evolution of conductivity, structure and thermochemical stability of lanthanum manganese iron nickelate perovskites | 7.3 | 24 | Citations (PDF) |
| 407 | Characterization of Diffuse Scattering in Yttria-Stabilized Zirconia by Electron Diffraction and High-Resolution Transmission Electron Microscopy | 4.6 | 20 | Citations (PDF) |
| 408 | Efficient Reduction of CO[sub 2] in a Solid Oxide Electrolyzer | 2.3 | 221 | Citations (PDF) |
| 409 | Effect of Minor Additions of CeO2 on Conductivity of Perovskites with Mixed Ionic-Electronic Conductivity | 0.5 | 5 | Citations (PDF) |
| 410 | Spin-glass transition in a La-dopedSr2MnWO6double perovskite | 2.4 | 7 | Citations (PDF) |
| 411 | Effect of Minor Additions of CeO2 on Conductivity of Perovskites with Mixed Ionic-Electronic Conductivity | 0.0 | 0 | Citations (PDF) |
| 412 | New Strategies on SOFC | 0.1 | 1 | Citations (PDF) |
| 413 | SOFCRoll Development at St. Andrews Fuel Cells Ltd. | 0.8 | 6 | Citations (PDF) |
| 414 | Doped Nanocrystalline Pt-Promoted Ceria-Zirconia as Anode Catalysts for IT SOFC: Synthesis and Properties | 0.1 | 8 | Citations (PDF) |
| 415 | Thermodynamic Aspects of the Reaction of Lithium with SnP[sub 2]O[sub 7] Based Positive Electrodes | 2.2 | 9 | Citations (PDF) |
| 416 | A Novel Direct Carbon Fuel Cell Concept | 0.8 | 38 | Citations (PDF) |
| 417 | Structural Chemistry and Conductivity of a Solid Solution of YBa1-xSrxCo2O5+δ | 2.3 | 49 | Citations (PDF) |
| 418 | Combined Neutron Diffraction and Atomistic Modeling Studies of Structure, Defects, and Water Incorporation in Doped Barium Cerate Perovskites | 4.6 | 22 | Citations (PDF) |
| 419 | Co-doping of scandia–zirconia electrolytes for SOFCs | 2.6 | 69 | Citations (PDF) |
| 420 | Effect of Ti-substitution on the Electrical Properties of MnNb2O6-δ | 4.6 | 20 | Citations (PDF) |
| 421 | A new anode for solid oxide fuel cells with enhanced OCV under methane operation | 2.0 | 39 | Citations (PDF) |
| 422 | Synthesis, chemical stability and proton conductivity of the perovksites Ba(Ce,Zr)1−x Scx O3−δ | 2.6 | 146 | Citations (PDF) |
| 423 | Catalytic properties of the proton conductor materials: Sr3CaZr0.5Ta1.5O8.75, BaCe0.9Y0.1O2.95 and Ba3Ca1.18Nb1.82O8.73 for reverse water gas shift | 2.6 | 16 | Citations (PDF) |
| 424 | An efficient ceramic-based anode for solid oxide fuel cells | 6.1 | 82 | Citations (PDF) |
| 425 | Conductivity studies of dense yttrium-doped BaZrO3 sintered at 1325°C | 2.4 | 303 | Citations (PDF) |
| 426 | LSCM–(YSZ–CGO) composites as improved symmetrical electrodes for solid oxide fuel cells | 5.2 | 82 | Citations (PDF) |
| 427 | Carbon–air fuel cell development to satisfy our energy demands | 2.2 | 9 | Citations (PDF) |
| 428 | Mixed conductivity and electrochemical behavior of (La0.75Sr0.25)0.95Cr0.5Mn0.5O3−δ | 2.6 | 120 | Citations (PDF) |
| 429 | (La,Sr)TiO<sub>3+δ</sub> en lugar de (La,Sr)TiO<sub>3+d</sub> | 1.6 | 2 | Citations (PDF) |
| 430 | A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodes | 7.3 | 409 | Citations (PDF) |
| 431 | Methane Oxidation at Redox Stable Fuel Cell Electrode La0.75Sr0.25Cr0.5Mn0.5O3-δ | 2.0 | 103 | Citations (PDF) |
| 432 | Microstructural optimisation of materials for SOFC applications using PMMA microspheres | 7.3 | 61 | Citations (PDF) |
| 433 | On the Electrical Properties of Synthetic Manganocolumbite MnNb2O6-δ | 4.6 | 22 | Citations (PDF) |
| 434 | Anodic Performance and Intermediate Temperature Fuel Cell Testing of La0.75Sr0.25Cr0.5Mn0.5O3-δat Lanthanum Gallate Electrolytes | 4.6 | 63 | Citations (PDF) |
| 435 | Phase Transition in Perovskite Oxide La0.75Sr0.25Cr0.5Mn0.5O3-δ Observed by in Situ High-Temperature Neutron Powder Diffraction | 4.6 | 91 | Citations (PDF) |
| 436 | New Anode Materials for Solid Oxide Fuel Cells | 0.0 | 0 | Citations (PDF) |
| 437 | Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation | 30.6 | 401 | Citations (PDF) |
| 438 | The development of a carbon–air semi fuel cell | 6.1 | 91 | Citations (PDF) |
| 439 | Structural studies on W6+ and Nd3+ substituted La2Mo2O9 materials | 2.4 | 73 | Citations (PDF) |
| 440 | Mn-substituted titanates as efficient anodes for direct methane SOFCs | 2.6 | 60 | Citations (PDF) |
| 441 | Electronic transport in the novel SOFC anode material La1−xSrxCr0.5Mn0.5O3±δ | 2.6 | 91 | Citations (PDF) |
| 442 | Oxygen diffusion and surface exchange studies on (La0.75Sr0.25)0.95Cr0.5Mn0.5O3−δ | 2.6 | 51 | Citations (PDF) |
| 443 | Anomalous variations of unit cell parameters with composition in proton conducting, ACeO3-type perovskite solid solutions | 2.6 | 30 | Citations (PDF) |
| 444 | Application of an alternative representation to identify models to fit impedance spectra | 2.6 | 4 | Citations (PDF) |
| 445 | Studies on the Reorganization of Extended Defects with Increasingn in the Perovskite-Based La4Srn-4TinO3n+2 Series | 11.9 | 61 | Citations (PDF) |
| 446 | An Efficient Solid Oxide Fuel Cell Based upon Single-Phase Perovskites | 17.5 | 184 | Citations (PDF) |
| 447 | Phase transition, thermal expansion and electrical properties of BiCu2VO6 | 2.4 | 10 | Citations (PDF) |
| 448 | Ionic conductivity of amorphous lithium lanthanum titanate thin film | 2.6 | 72 | Citations (PDF) |
| 449 | Synthesis, sinterability and ionic conductivity of nanocrystalline LaMoO powders | 2.6 | 56 | Citations (PDF) |
| 450 | Elaboration of CO2 tolerance limits of BaCe0.9Y0.1O3–δ electrolytes for fuel cells and other applications | 2.6 | 209 | Citations (PDF) |
| 451 | Conductivity of Stabilised Proton Conducting Oxides Sintered at Lower Temperatures | 0.0 | 0 | Citations (PDF) |
| 452 | Yttria Co-Doping of Scandia-Zirconia Electrolytes for
SOFCs | 0.2 | 4 | Citations (PDF) |
| 453 | Sc-Substituted Oxygen Excess Titanates as Fuel Electrodes for SOFCs | 2.2 | 37 | Citations (PDF) |
| 454 | Investigation of proton conducting BaZr0.9Y0.1O2.95: BaCe0.9Y0.1O2.95core–shell structures | 7.3 | 69 | Citations (PDF) |
| 455 | Evidence of three types of short range ordered fluorite structure in the (1 – x) Y0.15Zr0.85O1.93–x Y0.75Nb0.25O1.75(0 ≤x≤ 1) system | 7.3 | 22 | Citations (PDF) |
| 456 | Formation, Structure, and Stability of Titanate Nanotubes and Their Proton Conductivity | 2.0 | 203 | Citations (PDF) |
| 457 | Avoidance of La2Zr2O7 Formation on Co-Sintering the
(La0.8Sr0.2)1−xMnO3/YSZ System | 0.2 | 0 | Citations (PDF) |
| 458 | Influence of LSCM Anodes Microstructure on SOFC Performance | 0.0 | 0 | Citations (PDF) |
| 459 | Avoidance of La2Zr2O7 Formation on Co-sintering the (La0.8 Sr0.2)1-x MnO3 / YSZ System | 0.0 | 0 | Citations (PDF) |
| 460 | Optimization of superconducting critical temperatures by control of cation and anion stoichiometry in Bi2Sr2CaCu2Oδ-based solid solutions | 2.8 | 0 | Citations (PDF) |
| 461 | Investigation of the Mixed Conducting Oxide ScYZT as a Potential SOFC Anode Material | 2.2 | 32 | Citations (PDF) |
| 462 | Advanced anodes for high-temperature fuel cells | 23.7 | 1,405 | Citations (PDF) |
| 463 | A new alternative representation of impedance data using the derivative of the tangent of the phase angle | 4.6 | 23 | Citations (PDF) |
| 464 | Solid state NMR studies of phosphate/tin matrix formed on electrochemical insertion into SnP2O7 | 2.6 | 35 | Citations (PDF) |
| 465 | Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite | 2.4 | 11 | Citations (PDF) |
| 466 | Discovery and characterization of novel oxide anodes for solid oxide fuel cells | 5.5 | 185 | Citations (PDF) |
| 467 | The Bourner lecture | 6.1 | 15 | Citations (PDF) |
| 468 | Microdomain texture and microstructures of Fe4+-containing CaTi0.4Fe0.6O3−δ | 2.4 | 13 | Citations (PDF) |
| 469 | Synthesis and Characterization of (La[sub 0.75]Sr[sub 0.25])Cr[sub 0.5]Mn[sub 0.5]O[sub 3−δ], a Redox-Stable, Efficient Perovskite Anode for SOFCs | 2.2 | 387 | Citations (PDF) |
| 470 | Catalytic Properties of the Perovskite Oxide La0.75Sr0.25Cr0.5Fe0.5O3-δin Relation to Its Potential as a Solid Oxide Fuel Cell Anode Material | 4.6 | 192 | Citations (PDF) |
| 471 | Structural and Electrical Properties of the Perovskite Oxide Sr2FeNbO6 | 4.6 | 66 | Citations (PDF) |
| 472 | Synthesis and characterization of n=5, 6 members of the La4Srn$minus;4TinO3n+2 series with layered structure based upon perovskite | 2.4 | 0 | Citations (PDF) |
| 473 | Thermomechanical and conductivity studies of doped niobium titanates as possible current collector material in the SOFC anode | 2.2 | 9 | Citations (PDF) |
| 474 | Water incorporation studies on doped barium cerate perovskites | 2.6 | 63 | Citations (PDF) |
| 475 | A redox-stable efficient anode for solid-oxide fuel cells | 23.7 | 1,223 | Citations (PDF) |
| 476 | Ruthenium complexes of 2-(2′-pyridyl)benzimidazole as photosensitizers for dye-sensitized solar cellsElectronic supplementary information (ESI) available: details of the luminescence measurements and solar cell construction and testing; synthesis details; 1H–1H COSY and NOESY 2D spectra for [(bpy)2Ru(pbimH)](PF6)2. See http://www.rsc.org/suppdata/dt/b2/b208289f/ | 2.3 | 30 | Citations (PDF) |
| 477 | Lone-pair containment in closed cavities. The MTe6O13 (M = Mn, Ni, Co) family of ternary oxides | 2.3 | 20 | Citations (PDF) |
| 478 | Electrochemical Studies of Nickel and Copper/Yttria Titania Zirconia Ceria Cermets | 2.2 | 9 | Citations (PDF) |
| 479 | Development of SOFCRoll | 0.2 | 0 | Citations (PDF) |
| 480 | Synthesis, Crystal Structure, and Oxide Ion Conductivity in Bi4.6Ca1.1VO10.5 | 4.6 | 8 | Citations (PDF) |
| 481 | Study on the structural and electrical properties of the double perovskite oxide SrMn0.5Nb0.5O3−δ | 7.3 | 35 | Citations (PDF) |
| 482 | Structure–property correlations in the new ferroelectric Bi5PbTi3O14Cl and related layered oxyhalide intergrowth phases | 7.3 | 26 | Citations (PDF) |
| 483 | Optimization of Mixed Conducting Properties of Y2O3–ZrO2–TiO2 and Sc2O3–Y2O3–ZrO2–TiO2 Solid Solutions as Potential SOFC Anode Materials | 2.4 | 59 | Citations (PDF) |
| 484 | Layered Intergrowth Phases Bi4MO8X (X=Cl, M=Ta and X=Br, M=Ta or Nb): Structural and Electrophysical Characterization | 2.4 | 96 | Citations (PDF) |
| 485 | Preparation of thin films using the tape-casting process for use in the solid oxide fuel cell | 2.2 | 3 | Citations (PDF) |
| 486 | How amorphous are the tin alloys in li-inserted tin oxides? | 2.2 | 21 | Citations (PDF) |
| 487 | Characterisation of novel anodes for solid oxide fuel cells based on oxygen-excess perovskite related structures | 2.2 | 6 | Citations (PDF) |
| 488 | Incorporation of molecular species into the vacancies of perovskite oxides | 2.6 | 20 | Citations (PDF) |
| 489 | Combined X-ray study of lithium (tin) cobalt oxide matrix negative electrodes for Li-ion batteries | 4.1 | 51 | Citations (PDF) |
| 490 | Structural studies of the distorted perovskite proton conductors Sr3Ca1+xNb2−xO9−δ | 2.6 | 15 | Citations (PDF) |
| 491 | Structure and properties of nonstoichiometric mixed perovskites A3B′1+xB″2−xO9−δ | 2.6 | 15 | Citations (PDF) |
| 492 | Influence of structure and composition upon performance of tin phosphate based negative electrodes for lithium batteries | 4.1 | 95 | Citations (PDF) |
| 493 | Two high-temperature paraelectric phases inSr0.85Bi2.1Ta2O9 | 2.4 | 70 | Citations (PDF) |
| 494 | Electrochemical comparison between SnO2 and Li2SnO3 synthesized at high and low temperatures | 2.2 | 18 | Citations (PDF) |
| 495 | B site doped strontium titanate as a potential SOFC substrate | 2.2 | 26 | Citations (PDF) |
| 496 | Investigations into Sr3CaZr0.5Ta1.5O8.75, a novel proton conducting perovskite oxide | 2.6 | 36 | Citations (PDF) |
| 497 | Investigation of lead tin fluorides as possible negative electrodes for Li-ion batteries | 6.1 | 15 | Citations (PDF) |
| 498 | Qualitative X‐ray Diffraction Analysis of Metastable Tetragonal (
t
′) Zirconia | 3.1 | 65 | Citations (PDF) |
| 499 | Preparation and characterisation of apatite-type lanthanum silicates by a sol-gel process | 4.6 | 224 | Citations (PDF) |
| 500 | Electrochemical Characterization of Ceramic SOFC Anodes | 2.2 | 57 | Citations (PDF) |
| 501 | An NMR Investigation of Lithium Occupancy of Different Sites in the Oxide Superconductor LiTi2O4 and Related Compounds | 2.4 | 40 | Citations (PDF) |
| 502 | X-ray-induced stripes dynamic in high-temperature superconductor Hg0.8Tl0.2Ba2Ca2Cu3O8+δ | 2.2 | 6 | Citations (PDF) |
| 503 | Structural studies on the optimisation of fast oxide ion transport | 2.6 | 33 | Citations (PDF) |
| 504 | Hydrogen titanates as potential proton conducting fuel cell electrolytes | 2.6 | 48 | Citations (PDF) |
| 505 | Synthesis and ionic conduction of apatite-type materials | 2.2 | 24 | Citations (PDF) |
| 506 | X-ray study of metal oxide based anodes for Li-ion batteries | 2.2 | 2 | Citations (PDF) |
| 507 | Modulated Fluorite-Type Structure of Materials from the (1−x)Y0.5Zr0.5O1.75−xY0.75Nb0.25O1.75(0 ≤x≤ 1) System | 4.6 | 41 | Citations (PDF) |
| 508 | Investigation of Ramsdellite Titanates as Possible New Negative Electrode Materials for Li Batteries | 2.2 | 93 | Citations (PDF) |
| 509 | Li1 + x Fe1 − 3x Ti1 + 2x O 4 (0.0 ≤ x ≤ 0.33) Based Spinels: Possible Negative Electrode Materials for Future Li‐Ion Batteries | 2.2 | 90 | Citations (PDF) |
| 510 | Doped tin oxides as potential lithium ion battery negative electrodes | 2.2 | 39 | Citations (PDF) |
| 511 | Title is missing! | 0.0 | 8 | Citations (PDF) |
| 512 | Sinterability of commercial 8 mol% yttria-stabilized zirconia powders and the effect of sintered density on the ionic conductivity | 2.8 | 141 | Citations (PDF) |
| 513 | A New Solid Solution Series Linking LiTi2O4and Li2Ti3O7Ramsdellites: A Combined X-Ray and Neutron Study | 2.4 | 16 | Citations (PDF) |
| 514 | The optimisation of mixed conduction in potential S.O.F.C. anode materials | 2.2 | 11 | Citations (PDF) |
| 515 | Synthesis and electrical characterisation of different doped magnesium titanates | 2.2 | 2 | Citations (PDF) |
| 516 | Electrical characterization of highly Titania doped YSZ | 2.2 | 40 | Citations (PDF) |
| 517 | Factors affecting the photoelectrochemical fixation of carbon dioxide with semiconductor colloids | 3.5 | 63 | Citations (PDF) |
| 518 | Synthesis and crystal structure of the distorted perovskite Sr0.97NbO3 determined by high resolution powder neutron diffraction | 7.3 | 35 | Citations (PDF) |
| 519 | Yttrium and lead nuclear magnetic resonance investigation of a 1212 superconductor, | 1.6 | 2 | Citations (PDF) |
| 520 | Synthesis and electrical characterisation of doped perovskite titanates as potential anode materials for solid oxide fuel cells | 7.3 | 174 | Citations (PDF) |
| 521 | High oxide ion conductivity in non-stoichiometric pyrochlores and fluorites in the ternary system ZrO2 - Gd2O3 - TiO2 | 2.2 | 11 | Citations (PDF) |
| 522 | Search for new superconducting oxides in SrNbO system | 0.9 | 0 | Citations (PDF) |
| 523 | The transport and magnetic resonance properties of the organic superconductor NMe4[Ni(dmit)2]2 | 0.9 | 1 | Citations (PDF) |
| 524 | Transformation of LiTi2O4from Spinel to Ramsdellite on Heating | 2.4 | 27 | Citations (PDF) |
| 525 | Study of the order–disorder transition in yttria-stabilised zirconia by neutron diffraction | 7.3 | 61 | Citations (PDF) |
| 526 | Synthesis and electrical characterisation of the perovskite niobate-titanates, Sr1−x/2Ti1−xNbxO3−δ | 2.2 | 35 | Citations (PDF) |
| 527 | Phase transitions and structural instability in HTSC compounds and related phases | 0.4 | 3 | Citations (PDF) |
| 528 | Syntheses and properties of the lead 1,3-dithiole-2-thione-4,5-dithiolate (dmit) compounds: Ph2Pb(dmit), [Q] [Ph2Pb(dmit) I] [Q = NEt4 or 1,4-Me2-pyridinium], (Ph3Pb)2 (dmit) and Pb(dmit) | 2.1 | 15 | Citations (PDF) |
| 529 | Diorganotin 1,3-dithiole-2-thione-4,5-dithiolate compounds, R2Sn(dmit): the crystal structure of MePhSn(dmit) | 1.8 | 36 | Citations (PDF) |
| 530 | Oxide ion transport in highly defective cubic stabilized zirconias | 2.2 | 16 | Citations (PDF) |
| 531 | Microstructural investigations of reduced magnesium titanate spinels which have shown anomalous resistance behaviour | 4.6 | 0 | Citations (PDF) |
| 532 | Synthesis and Characterization of Tetraethylammonium and 1,4-Dimethylpyridinium Antimony(III) Bis-dmit Complexes | 3.4 | 33 | Citations (PDF) |
| 533 | The AC Impedance Response of the Physical Interface Between Yttria‐Stabilized Zirconia and YBa2Cu3 O 7 − x | 2.2 | 63 | Citations (PDF) |
| 534 | Effects of nanocrystallization upon the soft magnetic properties of Co‐based amorphous alloys | 1.6 | 54 | Citations (PDF) |
| 535 | Production of tartrate and glycolate from the electrochemical reduction of glyoxylate | 2.3 | 4 | Citations (PDF) |
| 536 | Electrochemical lithium insertion into magnesium titanate spinels | 2.6 | 2 | Citations (PDF) |
| 537 | Equation of motion of domain walls and equivalent circuits in soft ferromagnetic materials | 1.6 | 52 | Citations (PDF) |
| 538 | Critical current behaviour in reduced magnesium titanate spinel showing zero resistance | 0.9 | 7 | Citations (PDF) |
| 539 | Chapter 22. New compounds and structures | 0.9 | 1 | Citations (PDF) |
| 540 | Effects of thermal annealing on the magnetization dynamics of vitrovac amorphous ribbons | 1.6 | 46 | Citations (PDF) |
| 541 | Stoichiometry and kinetics of formation of Bi2Sr2CaCu2O? solid solutions | 7.3 | 21 | Citations (PDF) |
| 542 | Chapter 22. New compounds and structures | 0.9 | 1 | Citations (PDF) |
| 543 | Main group metal 1,3-dithiole-2-thione-4,5-dithiolato (DMIT) compoundsIII. Synthesis of tetrabutylammonium bis(1,3-dithiole-2-thione-4,5-dithiolato)dihalostannates. Crystal structure of [Bu4N]2[I2Sn(DMIT)2] | 2.1 | 17 | Citations (PDF) |
| 544 | Main group metal 1,3-dithiole-2-thione-4,5-dithiolate (DMIT) compounds | 1.8 | 23 | Citations (PDF) |
| 545 | Solid-solution formation, electrical properties and zero-resistance behaviour in the spinel system Mg2TiO4–MgTi2O4 | 7.3 | 22 | Citations (PDF) |
| 546 | Characterization of Ca-doped Bi2 +xSr2 –xCuOz | 7.3 | 8 | Citations (PDF) |
| 547 | Chapter 20. New compounds and structures | 0.9 | 2 | Citations (PDF) |
| 548 | Organotin-DMIT complexes: crystal structure of [Bu4N][Me2SnCl(DMIT)] | 1.8 | 23 | Citations (PDF) |
| 549 | Electrical Properties of Polycrystalline Nickel Zinc Ferrites | 3.1 | 85 | Citations (PDF) |
| 550 | Electroceramics: Characterization by Impedance Spectroscopy | 17.5 | 2,710 | Citations (PDF) |
| 551 | Domain wall relaxation in amorphous ribbons | 1.6 | 26 | Citations (PDF) |
| 552 | Characterisation of Incommensurate Bi2+xSr2-xCuOzby X-Ray Powder Diffraction and Oxygen Content Determinations | 1.2 | 25 | Citations (PDF) |
| 553 | Chapter 10. New compounds and structures | 0.9 | 1 | Citations (PDF) |
| 554 | Oxygen stoichiometry-Tccorrelations in Bi2Sr2CaCu2O8+x | 2.4 | 38 | Citations (PDF) |
| 555 | Incommensurate structure and X-ray powder diffraction data for Bi2Sr2CaCu2O8+x | 2.4 | 18 | Citations (PDF) |
| 556 | The cyclic voltammetry of some sulphonated transition metal phthalocyanines in dimethylsulphoxide and in water | 0.0 | 49 | Citations (PDF) |
| 557 | The voltammetry of mixed solutions of carbon dioxide and metal phthalocyanines in DMSO | 0.0 | 20 | Citations (PDF) |
| 558 | Ca12Al14O33 ? A possible high-temperature moisture sensor | 2.3 | 26 | Citations (PDF) |
| 559 | High oxide ion conductivity in Ca12Al14O33 | 30.6 | 208 | Citations (PDF) |
| 560 | Formation of two-carbon acids from carbon dioxide by photoreduction on cadmium sulphide | 1.9 | 71 | Citations (PDF) |
| 561 | Orthorhombic-tetragonal transition in YBa2Cu3Ox | 2.4 | 28 | Citations (PDF) |
| 562 | Regulation of
d-band centers in layered double hydroxide nanocages through Zn doping for improved photocatalytic CO
2 reduction | 7.7 | 14 | Citations (PDF) |
| 563 | Revisiting the original 2003 garnet-like Li-ion conducting solid electrolytes Li
5
La
3
M
2
O
12
(M = Nb, Ta, Nb/Ta): a look into phase formation and the identification of carbonate and alumina contamination | 6.7 | 0 | Citations (PDF) |
| 564 | Nanostructured La
<sub>0.8</sub>
Sr
<sub>0.2</sub>
Cr
<sub>0.5</sub>
Mn
<sub>0.5</sub>
O
<sub>3</sub>
Anode for Direct Methanol Solid Oxide Fuel Cells | 0.0 | 0 | Citations (PDF) |
| 565 | Iron doped magnesium chromite spinel and LSM coating to diminish chromium poisoning in the SOFC cathode environment | 6.6 | 0 | Citations (PDF) |
| 566 | Engineering site disorder to give rise to enhanced conductivity in a scandia-stabilised zirconia electrolyte via disruption of short-range ordering | 2.6 | 1 | Citations (PDF) |
| 567 | Study of the effect of replacing Sm3+ by divalent cations on the structure and electrical properties of Sm2TiO5 | 2.6 | 0 | Citations (PDF) |
| 568 | A numerical study of direct ammonia-fuelled solid oxide fuel cells based on a transient internal cracking model | 8.6 | 1 | Citations (PDF) |
| 569 | Investigation Into the Electrochemical Performance of Micron‐ and Nanosized Tin in Diglyme and Carbonate Electrolytes in Sodium Ion Batteries | 16.3 | 2 | Citations (PDF) |
| 570 | Unravelling the role of B-site cation enrichment and Co–Fe exsolution in LaAl
0.90
Co
0.05
Fe
0.05
O
3
on oxygen reduction electrocatalysis | 2.9 | 0 | Citations (PDF) |
| 571 | Al/Nb Co‐Doped La
2
Ti
2
O
7
as an Efficient Photocatalyst for H
2
Production | 2.7 | 0 | Citations (PDF) |
| 572 | Investigation Into the Electrochemical Performance of Micron‐ and Nanosized Tin in Diglyme and Carbonate Electrolytes in Sodium Ion Batteries (Adv. Energy Mater. 27/2026) | 16.3 | 0 | Citations (PDF) |
