| 1 | Vortex Fluidic Mediated Synthesis of Enhanced Hydrogen Producing Magnetic Gold | 4.5 | 3 | Citations (PDF) |
| 2 | Crosslinking Approaches for Polyethylene Imine (PEI) and Its Uses in Adsorption of Heavy Metals, Dyes, and Carbon Dioxide | 1.6 | 31 | Citations (PDF) |
| 3 | Elucidating the role of heterojunction in pristine non-fullerene acceptor organic solar cells† | 22.6 | 27 | Citations (PDF) |
| 4 | A Homopolymer of Xanthenoxanthene-Based Polycyclic Heteroaromatic for Efficient and Stable Perovskite Solar Cells | 11.8 | 15 | Citations (PDF) |
| 5 | Enhanced Photocatalytic and Photovoltaic Performance Arising from Unconventionally Low Donor–Y6 Ratios | 17.8 | 50 | Citations (PDF) |
| 6 | Investigation of different degradation pathways for organic photovoltaics at different temperatures† | 3.8 | 4 | Citations (PDF) |
| 7 | Response Speed of Organic Photodiodes as a Function of Incident Optical Intensity | 4.8 | 6 | Citations (PDF) |
| 8 | Diketopyrrolopyrrole-Dioxo-Benzodithiophene-Based Multifunctional Conjugated Polymers for Organic Field-Effect Transistors and Perovskite Solar Cells | 3.3 | 8 | Citations (PDF) |
| 9 | Printing and Coating Techniques for Scalable Organic Photovoltaic Fabrication | 2.1 | 23 | Citations (PDF) |
| 10 | From light to hydrogen: the complete life cycle of free charges in photocatalytic nanoparticles† | 3.0 | 10 | Citations (PDF) |
| 11 | Preparation-Dependent Photocatalytic Hydrogen Evolution by Organic Semiconducting Nanoparticles | 4.2 | 8 | Citations (PDF) |
| 12 | Fine Tuning the Glass Transition Temperature and Crystallinity by Varying the Thiophene-Quinoxaline Copolymer Composition | 2.1 | 2 | Citations (PDF) |
| 13 | Sub-4 nm mapping of donor–acceptor organic semiconductor nanoparticle composition† | 3.7 | 11 | Citations (PDF) |
| 14 | Formation and Charge Transport Properties of P(NDI2OD-T2) Thin Films with End-on Oriented Form III Crystallites | 4.8 | 7 | Citations (PDF) |
| 15 | Chemical and Electronic Properties of PTB7-Th and ITIC on ZnO Interfaces in Organic Solar Cells | 5.4 | 7 | Citations (PDF) |
| 16 | Introducing neat fullerenes to improve the thermal stability of slot-die coated organic solar cells† | 3.8 | 8 | Citations (PDF) |
| 17 | Reassessing the Significance of Reduced Aggregation and Crystallinity of Naphthalene Diimide-Based Copolymer Acceptors in All-Polymer Solar Cells | 3.6 | 8 | Citations (PDF) |
| 18 | Glutaraldehyde and Glyoxal Crosslinked Polyethylenimine for Copper Ion Adsorption from Water | 1.4 | 11 | Citations (PDF) |
| 19 | Highly active platinum single-atom catalyst grafted onto 3D carbon cloth support for the electrocatalytic hydrogen evolution reaction | 5.1 | 14 | Citations (PDF) |
| 20 | Continuous flow fabrication of green graphene oxide in aqueous hydrogen peroxide† | 4.1 | 19 | Citations (PDF) |
| 21 | Achieving High-Efficiency Organic Photovoltaics from a New Completely Amorphous Donor Polymer | 4.8 | 25 | Citations (PDF) |
| 22 | Multi-Edge Resonant Tender X-ray Diffraction for Probing the Crystalline Packing of Conjugated Polymers | 3.9 | 7 | Citations (PDF) |
| 23 | Continuous Flow Fabrication of MoS2 Scrolls for Electrocatalytic Hydrogen Evolution | 5.4 | 19 | Citations (PDF) |
| 24 | Dipole Formation at Active Materials/P(NDI3N-T-Br) Interface in Organic-Based Photovoltaic | 3.6 | 3 | Citations (PDF) |
| 25 | Surfactant Effects on Hydrogen Evolution by Small-Molecule Nonfullerene Acceptor Nanoparticles | 4.2 | 40 | Citations (PDF) |
| 26 | Red-Light-Mediated Photocatalytic Hydrogen Evolution by Hole Transfer from Non-Fullerene Acceptor Y6 | 2.4 | 25 | Citations (PDF) |
| 27 | Modification of the Surface Composition of PTB7-Th: ITIC Blend Using an Additive | 3.2 | 5 | Citations (PDF) |
| 28 | Near-Infrared Emission by Tuned Aggregation of a Porphyrin Compound in a Host–Guest Light-Emitting Electrochemical Cell | 4.8 | 18 | Citations (PDF) |
| 29 | Toward Faster Organic Photodiodes: Tuning of Blend Composition Ratio | 12.1 | 35 | Citations (PDF) |
| 30 | Temperature-Modulated Doping at Polymer Semiconductor Interfaces | 3.3 | 1 | Citations (PDF) |
| 31 | A Comparative Study on the Role of Polyvinylpyrrolidone Molecular Weight on the Functionalization of Various Carbon Nanotubes and Their Composites | 3.4 | 25 | Citations (PDF) |
| 32 | High shear in situ exfoliation of 2D gallium oxide sheets from centrifugally derived thin films of liquid gallium† | 4.1 | 9 | Citations (PDF) |
| 33 | Cyclic Copper Uptake and Release from Natural Seawater—A Fully Sustainable Antifouling Technique to Prevent Marine Growth | 8.7 | 11 | Citations (PDF) |
| 34 | Correlation of Changes in Electronic and Device Properties in Organic Photovoltaic with Exposure to Air | 3.2 | 5 | Citations (PDF) |
| 35 | Expanded Multiband Super-Nyquist CAP Modulation for Highly Bandlimited Organic Visible Light Communications | 3.3 | 9 | Citations (PDF) |
| 36 | Mechanism of Organic Solar Cell Performance Degradation upon Thermal Annealing of MoOx | 3.9 | 36 | Citations (PDF) |
| 37 | Light-induced degradation of a push–pull copolymer for ITO-free organic solar cell application | 1.8 | 12 | Citations (PDF) |
| 38 | People also looked at | 2.0 | 10 | Citations (PDF) |
| 39 | People also looked at | 2.0 | 8 | Citations (PDF) |
| 40 | Origin of Open-Circuit Voltage Turnover in Organic Solar Cells at Low Temperature | 3.3 | 13 | Citations (PDF) |
| 41 | An analysis of surface breakup induced by laser-generated cavitation bubbles in a turbulent liquid jet | 1.6 | 13 | Citations (PDF) |
| 42 | Highly Stable Indacenodithieno[3,2-b]thiophene-Based Donor–Acceptor Copolymers for Hybrid Electrochromic and Energy Storage Applications | 3.9 | 50 | Citations (PDF) |
| 43 | Elastic strain-hardening and shear-thickening exhibited by thermoreversible physical hydrogels based on poly(alkylene oxide)-grafted hyaluronic acid or carboxymethylcellulose† | 2.1 | 12 | Citations (PDF) |
| 44 | Porous PEI Coating for Copper Ion Storage and Its Controlled Electrochemical Release | 3.8 | 11 | Citations (PDF) |
| 45 | Effect of Alkyl Side Chain Length on Intra- and Intermolecular Interactions of Terthiophene–Isoindigo Copolymers | 2.4 | 17 | Citations (PDF) |
| 46 | Quantitative Grafting for Structure–Function Establishment: Thermoresponsive Poly(alkylene oxide) Graft Copolymers Based on Hyaluronic Acid and Carboxymethylcellulose | 3.9 | 6 | Citations (PDF) |
| 47 | On the Design of Host–Guest Light-Emitting Electrochemical Cells: Should the Guest be Physically Blended or Chemically Incorporated into the Host for Efficient Emission? | 4.8 | 24 | Citations (PDF) |
| 48 | Diffusion-Limited Crystallization: A Rationale for the Thermal Stability of Non-Fullerene Solar Cells | 5.5 | 121 | Citations (PDF) |
| 49 | Probing the Relationship between Molecular Structures, Thermal Transitions, and Morphology in Polymer Semiconductors Using a Woven Glass-Mesh-Based DMTA Technique | 4.8 | 55 | Citations (PDF) |
| 50 | Broad spectrum absorption and low-voltage electrochromic operation from indacenodithieno[3,2-b]thiophene-based copolymers† | 2.7 | 18 | Citations (PDF) |
| 51 | Role of Molecular Weight in Polymer Wrapping and Dispersion of MWNT in a PVDF Matrix | 3.4 | 11 | Citations (PDF) |
| 52 | Orange to green switching anthraquinone-based electrochromic material | 2.0 | 7 | Citations (PDF) |
| 53 | Optimizing Polymer Solar Cells Using Non-Halogenated Solvent Blends | 3.4 | 9 | Citations (PDF) |
| 54 | Copper Metallopolymer Catalyst for the Electrocatalytic Hydrogen Evolution Reaction (HER) | 3.4 | 13 | Citations (PDF) |
| 55 | Recent Advances in n-Type Polymers for All-Polymer Solar Cells | 17.8 | 252 | Citations (PDF) |
| 56 | Building intermixed donor–acceptor architectures for water-processable organic photovoltaics† | 2.1 | 33 | Citations (PDF) |
| 57 | Impact of environmentally friendly processing solvents on the properties of blade-coated polymer solar cells | 2.3 | 19 | Citations (PDF) |
| 58 | Application of an Open-Circuit Voltage Decay Model to Compare the Performances of Donor Polymers in Bulk Heterojunction Solar Cells | 2.6 | 5 | Citations (PDF) |
| 59 | Two-dimensional measurements of soot in a turbulent diffusion diesel flame: the effects of injection pressure, nozzle orifice diameter, and gas density | 1.2 | 12 | Citations (PDF) |
| 60 | Incorporation of Designed Donor–Acceptor–Donor Segments in a Host Polymer for Strong Near-Infrared Emission from a Large-Area Light-Emitting Electrochemical Cell | 3.9 | 26 | Citations (PDF) |
| 61 | Asymmetric photocurrent extraction in semitransparent laminated flexible organic solar cells | 9.0 | 60 | Citations (PDF) |
| 62 | Synthesis and Characterization of Isoindigo-Based Polymers with Thermocleavable Side Chains | 2.0 | 4 | Citations (PDF) |
| 63 | High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants | 12.1 | 113 | Citations (PDF) |
| 64 | Alcohol-Soluble Conjugated Polymers as Cathode Interlayers for All-Polymer Solar Cells | 3.9 | 25 | Citations (PDF) |
| 65 | High Performance All-Polymer Photodetector Comprising a Donor–Acceptor–Acceptor Structured Indacenodithiophene–Bithieno[3,4-c]Pyrroletetrone Copolymer | 3.3 | 56 | Citations (PDF) |
| 66 | High-Performance Organic Photodetectors from a High-Bandgap Indacenodithiophene-Based π-Conjugated Donor–Acceptor Polymer | 5.5 | 65 | Citations (PDF) |
| 67 | 8.0% Efficient All-Polymer Solar Cells with High Photovoltage of 1.1 V and Internal Quantum Efficiency near Unity | 16.6 | 85 | Citations (PDF) |
| 68 | Influence of Molecular Weight on the Creep Resistance of Almost Molten Polyethylene Blends | 2.0 | 9 | Citations (PDF) |
| 69 | Side chain modification on PDI-spirobifluorene-based molecular acceptors and its impact on organic solar cell performances† | 1.9 | 16 | Citations (PDF) |
| 70 | Ultrafast excited state dynamics of a bithiophene-isoindigo copolymer obtained by direct arylation polycondensation and its application in indium tin oxide-free solar cells | 2.7 | 12 | Citations (PDF) |
| 71 | Facile Synthesis of an Efficient and Robust Cathode Interface Material for Polymer Solar Cells | 3.9 | 19 | Citations (PDF) |
| 72 | Design, Synthesis and Computational Study of Fluorinated Quinoxaline-Oligothiophene-based Conjugated Polymers with Broad Spectral Coverage | 1.6 | 1 | Citations (PDF) |
| 73 | Environmentally friendly preparation of nanoparticles for organic photovoltaics | 2.0 | 33 | Citations (PDF) |
| 74 | Insights into the Oxidant/Polymer Interfacial Growth of Vapor Phase Polymerized PEDOT Thin Films | 3.2 | 24 | Citations (PDF) |
| 75 | Efficient Near-Infrared Electroluminescence at 840 nm with “Metal-Free” Small-Molecule:Polymer Blends | 17.8 | 61 | Citations (PDF) |
| 76 | Engineering Two-Phase and Three-Phase Microstructures from Water-Based Dispersions of Nanoparticles for Eco-Friendly Polymer Solar Cell Applications | 4.8 | 31 | Citations (PDF) |
| 77 | High-Speed OLEDs and Area-Emitting Light-Emitting Transistors from a Tetracyclic Lactim Semiconducting Polymer | 4.8 | 21 | Citations (PDF) |
| 78 | Relating open-circuit voltage losses to the active layer morphology and contact selectivity in organic solar cells† | 6.8 | 77 | Citations (PDF) |
| 79 | Heterogeneity in the fluorescence of graphene and graphene oxide quantum dots | 3.6 | 57 | Citations (PDF) |
| 80 | Highly Insulating Polyethylene Blends for High-Voltage Direct-Current Power Cables | 3.3 | 98 | Citations (PDF) |
| 81 | Poly(4-vinylpyridine): A New Interface Layer for Organic Solar Cells | 5.5 | 45 | Citations (PDF) |
| 82 | High-photovoltage all-polymer solar cells based on a diketopyrrolopyrrole–isoindigo acceptor polymer† | 6.8 | 66 | Citations (PDF) |
| 83 | Isothermal Crystallization Kinetics and Time–Temperature–Transformation of the Conjugated Polymer: Poly(3-(2′-ethyl)hexylthiophene) | 4.8 | 56 | Citations (PDF) |
| 84 | Unravelling the Thermomechanical Properties of Bulk Heterojunction Blends in Polymer Solar Cells | 3.9 | 86 | Citations (PDF) |
| 85 | Optimization of the power conversion efficiency in high bandgap pyridopyridinedithiophene-based conjugated polymers for organic photovoltaics by the random terpolymer approach | 4.7 | 7 | Citations (PDF) |
| 86 | High-Performance and Stable All-Polymer Solar Cells Using Donor and Acceptor Polymers with Complementary Absorption | 16.6 | 98 | Citations (PDF) |
| 87 | Enhanced thermal stability of a polymer solar cell blend induced by electron beam irradiation in the transmission electron microscope | 1.7 | 6 | Citations (PDF) |
| 88 | Enhanced thermal stability of a polymer solar cell blend induced by electron beam irradiation in the transmission electron microscope | 1.7 | 0 | Citations (PDF) |
| 89 | Platinum Terpyridine Metallopolymer Electrode as Cost-Effective Replacement for Bulk Platinum Catalysts in Oxygen Reduction Reaction and Hydrogen Evolution Reaction | 5.4 | 31 | Citations (PDF) |
| 90 | 9.0% power conversion efficiency from ternary all-polymer solar cells† | 22.6 | 214 | Citations (PDF) |
| 91 | Recent Development of Quinoxaline Based Polymers/Small Molecules for Organic Photovoltaics | 16.6 | 154 | Citations (PDF) |
| 92 | Deposition Methods of Graphene as Electrode Material for Organic Solar Cells | 16.6 | 71 | Citations (PDF) |
| 93 | Additive-like amounts of HDPE prevent creep of molten LDPE: Phase-behavior and thermo-mechanical properties of a melt-miscible blend | 2.7 | 31 | Citations (PDF) |
| 94 | A new quinoxaline and isoindigo based polymer as donor material for solar cells: Role of ecofriendly processing solvents on the device efficiency and stability | 2.3 | 24 | Citations (PDF) |
| 95 | Novel rhodanine based molecular acceptor for organic solar cells | 1.3 | 2 | Citations (PDF) |
| 96 | Synthesis and characterization of benzodithiophene and benzotriazole-based polymers for photovoltaic applications | 1.7 | 23 | Citations (PDF) |
| 97 | Luminescent line art by direct-write patterning | 14.6 | 20 | Citations (PDF) |
| 98 | Triazolobenzothiadiazole-Based Copolymers for Polymer Light-Emitting Diodes: Pure Near-Infrared Emission via Optimized Energy and Charge Transfer | 4.8 | 58 | Citations (PDF) |
| 99 | High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing | 12.2 | 422 | Citations (PDF) |
| 100 | Utilizing Energy Transfer in Binary and Ternary Bulk Heterojunction Organic Solar Cells | 5.5 | 33 | Citations (PDF) |
| 101 | Low Band Gap Polymer Solar Cells With Minimal Voltage Losses | 16.6 | 92 | Citations (PDF) |
| 102 | High-Performance Hole Transport and Quasi-Balanced Ambipolar OFETs Based on D–A–A Thieno-benzo-isoindigo Polymers | 3.9 | 33 | Citations (PDF) |
| 103 | Bulk heterojunction organic photovoltaics from water-processable nanomaterials and their facile fabrication approaches | 17.0 | 23 | Citations (PDF) |
| 104 | Two-in-one: cathode modification and improved solar cell blend stability through addition of modified fullerenes† | 6.8 | 28 | Citations (PDF) |
| 105 | Inverted all-polymer solar cells based on a quinoxaline–thiophene/naphthalene-diimide polymer blend improved by annealing† | 6.8 | 59 | Citations (PDF) |
| 106 | Nano-pathways: Bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics | 12.1 | 80 | Citations (PDF) |
| 107 | Enhanced Ultraviolet Stability of Air-Processed Polymer Solar Cells by Al Doping of the ZnO Interlayer | 5.5 | 80 | Citations (PDF) |
| 108 | Induced photodegradation of quinoxaline based copolymers for photovoltaic applications | 4.8 | 29 | Citations (PDF) |
| 109 | Thioxanthone derivatives as stabilizers against electrical breakdown in cross-linked polyethylene for high voltage cable applications | 5.7 | 67 | Citations (PDF) |
| 110 | Matrix Organization and Merit Factor Evaluation as a Method to Address the Challenge of Finding a Polymer Material for Roll Coated Polymer Solar Cells | 16.6 | 52 | Citations (PDF) |
| 111 | Predicting thermal stability of organic solar cells through an easy and fast capacitance measurement | 4.8 | 46 | Citations (PDF) |
| 112 | Two-photon absorption of polyfluorene aggregates stabilized by insulin amyloid fibrils† | 4.0 | 10 | Citations (PDF) |
| 113 | Mapping fullerene crystallization in a photovoltaic blend: an electron tomography study | 3.7 | 14 | Citations (PDF) |
| 114 | Thia- and selena-diazole containing polymers for near-infrared light-emitting diodes† | 3.7 | 46 | Citations (PDF) |
| 115 | Pyrrolo[3,4-g]quinoxaline-6,8-dione-based conjugated copolymers for bulk heterojunction solar cells with high photovoltages† | 2.7 | 26 | Citations (PDF) |
| 116 | Role of the aggregation behavior of hydrophobic particles in paper surface hydrophobation | 4.2 | 17 | Citations (PDF) |
| 117 | Temperature-Dependent Optical Properties of Flexible Donor–Acceptor Polymers | 2.4 | 19 | Citations (PDF) |
| 118 | High electron affinity: a guiding criterion for voltage stabilizer design† | 6.8 | 82 | Citations (PDF) |
| 119 | Comparison of selenophene and thienothiophene incorporation into pentacyclic lactam-based conjugated polymers for organic solar cells† | 2.7 | 7 | Citations (PDF) |
| 120 | A New Application Area for Fullerenes: Voltage Stabilizers for Power Cable Insulation | 17.8 | 137 | Citations (PDF) |
| 121 | Improved performance and life time of inverted organic photovoltaics by using polymer interfacial materials | 4.8 | 11 | Citations (PDF) |
| 122 | An alternating copolymer of fluorene donor and quinoxaline acceptor versus a terpolymer consisting of fluorene, quinoxaline and benzothiadiazole building units: synthesis and characterization | 2.4 | 8 | Citations (PDF) |
| 123 | Conjugated polymers with polar side chains in bulk heterojunction solar cell devices | 2.2 | 10 | Citations (PDF) |
| 124 | Magnetization and Mössbauer study of partially oxidized iron cluster films deposited on HOPG | 2.1 | 12 | Citations (PDF) |
| 125 | Facile Monitoring of Fullerene Crystallization in Polymer Solar Cell Blends by UV–vis Spectroscopy | 2.0 | 18 | Citations (PDF) |
| 126 | Fullerene Nucleating Agents: A Route Towards Thermally Stable Photovoltaic Blends | 16.6 | 73 | Citations (PDF) |
| 127 | Charge Carrier Dynamics of Polymer:Fullerene Blends: From Geminate to Non-Geminate Recombination | 16.6 | 17 | Citations (PDF) |
| 128 | Computational modelling of donor–acceptor conjugated polymers through engineered backbone manipulations based on a thiophene–quinoxaline alternating copolymer† | 6.8 | 32 | Citations (PDF) |
| 129 | Structure–property relationships of oligothiophene–isoindigo polymers for efficient bulk-heterojunction solar cells† | 22.6 | 112 | Citations (PDF) |
| 130 | Conjugated polymers based on benzodithiophene and fluorinated quinoxaline for bulk heterojunction solar cells: thiophene versus thieno[3,2-b]thiophene as π-conjugated spacers† | 2.7 | 68 | Citations (PDF) |
| 131 | Very Low Band Gap Thiadiazoloquinoxaline Donor–Acceptor Polymers as Multi-tool Conjugated Polymers | 12.2 | 153 | Citations (PDF) |
| 132 | Tailored side-chain architecture of benzil voltage stabilizers for enhanced dielectric strength of cross-linked polyethylene | 2.7 | 72 | Citations (PDF) |
| 133 | Fullerene mixtures enhance the thermal stability of a non-crystalline polymer solar cell blend | 2.4 | 51 | Citations (PDF) |
| 134 | Neat C60:C70 buckminsterfullerene mixtures enhance polymer solar cell performance† | 6.8 | 27 | Citations (PDF) |
| 135 | Structural tuning of quinoxaline-benzodithiophene copolymers via alkyl side chain manipulation: synthesis, characterization and photovoltaic properties† | 6.8 | 38 | Citations (PDF) |
| 136 | Sub-glass transition annealing enhances polymer solar cell performance† | 6.8 | 53 | Citations (PDF) |
| 137 | Multifunctional materials for OFETs, LEFETs and NIR PLEDs† | 3.7 | 41 | Citations (PDF) |
| 138 | Improving Cathodes with a Polymer Interlayer in Reversed Organic Solar Cells | 16.6 | 50 | Citations (PDF) |
| 139 | A New Tetracyclic Lactam Building Block for Thick, Broad-Bandgap Photovoltaics | 12.2 | 77 | Citations (PDF) |
| 140 | A Facile Method to Enhance Photovoltaic Performance of Benzodithiophene-Isoindigo Polymers by Inserting Bithiophene Spacer | 16.6 | 68 | Citations (PDF) |
| 141 | Stability study of quinoxaline and pyrido pyrazine based co-polymers for solar cell applications | 4.8 | 26 | Citations (PDF) |
| 142 | Effects of side chain isomerism on the physical and photovoltaic properties of indacenodithieno[3,2-b]thiophene–quinoxaline copolymers: toward a side chain design for enhanced photovoltaic performance | 6.8 | 47 | Citations (PDF) |
| 143 | Light-harvesting capabilities of low band gap donor–acceptor polymers† | 2.1 | 33 | Citations (PDF) |
| 144 | 25th Anniversary Article: Isoindigo-Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors | 17.8 | 360 | Citations (PDF) |
| 145 | Computational Modeling of Isoindigo-Based Polymers Used in Organic Solar Cells | 2.4 | 29 | Citations (PDF) |
| 146 | An alternating D–A1–D–A2copolymer containing two electron-deficient moieties for efficient polymer solar cells† | 6.8 | 66 | Citations (PDF) |
| 147 | Influence of Incorporating Different Electron-Rich Thiophene-Based Units on the Photovoltaic Properties of Isoindigo-Based Conjugated Polymers: An Experimental and DFT Study | 3.9 | 62 | Citations (PDF) |
| 148 | 2D π-conjugated benzo[1,2-b:4,5-b′]dithiophene- and quinoxaline-based copolymers for photovoltaic applications† | 4.0 | 34 | Citations (PDF) |
| 149 | Tracing charge transfer states in polymer:fullerene bulk-heterojunctions | 6.8 | 11 | Citations (PDF) |
| 150 | Effect of electron-withdrawing side chain modifications on the optical properties of thiophene–quinoxaline acceptor based polymers | 3.4 | 29 | Citations (PDF) |
| 151 | Conformational Disorder Enhances Solubility and Photovoltaic Performance of a Thiophene–Quinoxaline Copolymer | 16.6 | 88 | Citations (PDF) |
| 152 | Nucleation-limited fullerenecrystallisation in a polymer–fullerene bulk-heterojunction blend† | 6.8 | 64 | Citations (PDF) |
| 153 | Near-Infrared Polymer Light-Emitting Diodes Based on Low-Energy Gap Oligomers Copolymerized into a High-Gap Polymer Host | 2.8 | 36 | Citations (PDF) |
| 154 | Molecular orbital energy level modulation through incorporation of selenium and fluorine into conjugated polymers for organic photovoltaic cells† | 6.8 | 35 | Citations (PDF) |
| 155 | Efficient red electroluminescence from diketopyrrolopyrrole copolymerised with a polyfluorene | 2.8 | 36 | Citations (PDF) |
| 156 | The role of charge stratification for reducing ringing in gasoline engine homogeneous charge compression ignition combustion investigated by optical imaging | 1.3 | 8 | Citations (PDF) |
| 157 | The Influence of Alkoxy Substitutions on the Properties of Diketopyrrolopyrrole-Phenyl Copolymers for Solar Cells | 2.1 | 9 | Citations (PDF) |
| 158 | Evaluation of the performance of several object types for electrical treeing experiments | 2.5 | 30 | Citations (PDF) |
| 159 | Charge separation dynamics in a narrow band gap polymer–PbS nanocrystal blend for efficient hybrid solar cells | 7.7 | 50 | Citations (PDF) |
| 160 | New quinoxaline and pyridopyrazine-based polymers for solution-processable photovoltaics | 4.8 | 78 | Citations (PDF) |
| 161 | Mixed C60/C70 based fullerene acceptors in polymer bulk-heterojunction solar cells | 2.0 | 19 | Citations (PDF) |
| 162 | Synthesis and characterization of benzodithiophene–isoindigo polymers for solar cells | 7.7 | 163 | Citations (PDF) |
| 163 | Ultrafast Terahertz Photoconductivity of Bulk Heterojunction Materials Reveals High Carrier Mobility up to Nanosecond Time Scale | 12.2 | 67 | Citations (PDF) |
| 164 | Influences of Surface Roughness of ZnO Electron Transport Layer on the Photovoltaic Performance of Organic Inverted Solar Cells | 2.4 | 156 | Citations (PDF) |
| 165 | Electron and Hole Contributions to the Terahertz Photoconductivity of a Conjugated Polymer:Fullerene Blend Identified | 3.1 | 33 | Citations (PDF) |
| 166 | Quantification of Quantum Efficiency and Energy Losses in Low Bandgap Polymer:Fullerene Solar Cells with High Open-Circuit Voltage | 12.1 | 201 | Citations (PDF) |
| 167 | Semi-Transparent Tandem Organic Solar Cells with 90% Internal Quantum Efficiency | 16.6 | 112 | Citations (PDF) |
| 168 | Alternating Copolymers and Alternative Device Geometries for Organic Photovoltaics | 3.2 | 9 | Citations (PDF) |
| 169 | Electrochemical control of amplified spontaneous emission in conjugated polymers | 2.0 | 3 | Citations (PDF) |
| 170 | Interlayer for Modified Cathode in Highly Efficient Inverted ITO-Free Organic Solar Cells | 17.8 | 110 | Citations (PDF) |
| 171 | Electronic Structure Calculations of Pure and Oxidized Copper Clusters Using Jellium and MO - LCAO Models | 0.1 | 0 | Citations (PDF) |
| 172 | Metal Cluster Oxidation: Sticking Probabilities and Ionization Potential Shiffs | 0.1 | 1 | Citations (PDF) |
| 173 | Photoinduced Charge Carriers in a Donor-Acceptor Double-Cable Polythiophene with Covalently Bound Tetracyanoanthraquinodimethane Moieties | 0.1 | 0 | Citations (PDF) |
| 174 | Tuning the Vertical Phase Separation in Polyfluorene:Fullerene Blend Films by Polymer Functionalization | 4.8 | 42 | Citations (PDF) |
| 175 | An Easily Accessible Isoindigo-Based Polymer for High-Performance Polymer Solar Cells | 12.2 | 374 | Citations (PDF) |
| 176 | Interactions between a luminescent conjugated polyelectrolyte and amyloid fibrils investigated with flow linear dichroism spectroscopy | 1.5 | 18 | Citations (PDF) |
| 177 | Carbon Monoxide Adsorption on Silver Doped Gold Clusters | 1.9 | 67 | Citations (PDF) |
| 178 | Side-Chain Architectures of 2,7-Carbazole and Quinoxaline-Based Polymers for Efficient Polymer Solar Cells | 3.9 | 122 | Citations (PDF) |
| 179 | An isoindigo-based low band gap polymer for efficient polymer solar cells with high photo-voltage† | 2.9 | 137 | Citations (PDF) |
| 180 | Lateral Phase Separation Gradients in Spin-Coated Thin Films of High-Performance Polymer:Fullerene Photovoltaic Blends | 12.1 | 49 | Citations (PDF) |
| 181 | Efficient infiltration of low molecular weight polymer in nanoporous TiO | 2.1 | 10 | Citations (PDF) |
| 182 | Influence of side chains on electrochromic properties of green donor–acceptor–donor polymers | 4.2 | 31 | Citations (PDF) |
| 183 | Blue-to-transmissive electrochromic switching of solution processable donor–acceptor polymers | 2.0 | 43 | Citations (PDF) |
| 184 | Enhance performance of organic solar cells based on an isoindigo-based copolymer by balancing absorption and miscibility of electron acceptor | 2.4 | 46 | Citations (PDF) |
| 185 | Mixed solvents for reproducible photovoltaic bulk heterojunctions | 1.3 | 9 | Citations (PDF) |
| 186 | The Origin of Pressure Waves in High Load HCCI Combustion: A High-Speed Video Analysis | 1.2 | 18 | Citations (PDF) |
| 187 | Fluorescence light emission at 1eV from a conjugated polymer | 2.1 | 17 | Citations (PDF) |
| 188 | Low bandgap polymers synthesized by FeCl oxidative polymerization | 4.8 | 60 | Citations (PDF) |
| 189 | Black Polymers in Bulk-Heterojunction Solar Cells | 2.2 | 11 | Citations (PDF) |
| 190 | Influence of Molecular Weight on the Performance of Organic Solar Cells Based on a Fluorene Derivative | 12.1 | 128 | Citations (PDF) |
| 191 | An Easily Synthesized Blue Polymer for High-Performance Polymer Solar Cells | 17.8 | 450 | Citations (PDF) |
| 192 | Synthesis and characterization of three small band gap conjugated polymers for solar cell applications† | 2.7 | 18 | Citations (PDF) |
| 193 | Small Band Gap Polymers Synthesized via a Modified Nitration of 4,7-Dibromo-2,1,3-benzothiadiazole | 3.2 | 85 | Citations (PDF) |
| 194 | White Light with Phosphorescent Protein Fibrils in OLEDs | 6.3 | 72 | Citations (PDF) |
| 195 | Geminate Charge Recombination in Polymer/Fullerene Bulk Heterojunction Films and Implications for Solar Cell Function | 12.2 | 134 | Citations (PDF) |
| 196 | Adsorption and reactions of O2 and D2 on small free palladium clusters in a cluster–molecule scattering experiment | 1.6 | 8 | Citations (PDF) |
| 197 | Observation of a Charge Transfer State in Low-Bandgap Polymer/Fullerene Blend Systems by Photoluminescence and Electroluminescence Studies | 12.1 | 75 | Citations (PDF) |
| 198 | Device Performance of APFO-3/PCBM Solar Cells with Controlled Morphology | 17.8 | 53 | Citations (PDF) |
| 199 | Nanomorphology of Bulk Heterojunction Organic Solar Cells in 2D and 3D Correlated to Photovoltaic Performance | 3.9 | 48 | Citations (PDF) |
| 200 | Alternating Polyfluorenes Collect Solar Light in Polymer Photovoltaics | 11.8 | 242 | Citations (PDF) |
| 201 | In situFTIR spectroelectrochemical characterization of n- and p-dopable phenyl-substituted polythiophenes | 2.1 | 6 | Citations (PDF) |
| 202 | Synthesis, Characterization, and Devices of a Series of Alternating Copolymers for Solar Cells | 4.8 | 121 | Citations (PDF) |
| 203 | Alternating copolymers of fluorene and donor–acceptor–donor segments designed for miscibility in bulk heterojunction photovoltaics† | 7.7 | 28 | Citations (PDF) |
| 204 | Structure-property relationships of small bandgap conjugated polymers for solar cells | 2.4 | 73 | Citations (PDF) |
| 205 | Intrinsic and extrinsic influences on the temperature dependence of mobility in conjugated polymers | 2.0 | 17 | Citations (PDF) |
| 206 | On the desired properties of a conjugated polymer-electrolyte blend in a light-emitting electrochemical cell | 2.0 | 58 | Citations (PDF) |
| 207 | High photovoltage achieved in low band gap polymer solar cells by adjusting energy levels of a polymer with the LUMOs of fullerene derivatives | 7.7 | 141 | Citations (PDF) |
| 208 | Enhanced Current Efficiency from Bio-Organic Light-Emitting Diodes Using Decorated Amyloid Fibrils with Conjugated Polymer | 6.3 | 53 | Citations (PDF) |
| 209 | Integration of amyloid nanowires in organic solar cells | 2.4 | 49 | Citations (PDF) |
| 210 | Photoexcitation dynamics in an alternating polyfluorene copolymer | 2.5 | 25 | Citations (PDF) |
| 211 | Red and near infrared polarized light emissions from polyfluorene copolymer based light emitting diodes | 2.4 | 46 | Citations (PDF) |
| 212 | Donor and Acceptor Behavior in a Polyfluorene for Photovoltaics | 2.4 | 44 | Citations (PDF) |
| 213 | A New Donor–Acceptor–Donor Polyfluorene Copolymer with Balanced Electron and Hole Mobility | 12.1 | 284 | Citations (PDF) |
| 214 | A Conjugated Polymer for Near Infrared Optoelectronic Applications | 17.8 | 169 | Citations (PDF) |
| 215 | New low band gap alternating polyfluorene copolymer-based photovoltaic cells | 4.8 | 87 | Citations (PDF) |
| 216 | Improvements of fill factor in solar cells based on blends of polyfluorene copolymers as electron donors | 1.6 | 41 | Citations (PDF) |
| 217 | Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—Effects of specific substrate interaction | 5.1 | 134 | Citations (PDF) |
| 218 | Blue light-emitting diodes based on novel polyfluorene copolymers | 2.9 | 5 | Citations (PDF) |
| 219 | Photoinduced Charge Transfer and Efficient Solar Energy Conversion in a Blend of a Red Polyfluorene Copolymer with CdSe Nanoparticles | 6.3 | 163 | Citations (PDF) |
| 220 | Electrochemical and optical studies of the band gaps of alternating polyfluorene copolymers | 3.4 | 184 | Citations (PDF) |
| 221 | Transparent polymer cathode for organic photovoltaic devices | 3.4 | 78 | Citations (PDF) |
| 222 | An alternating low band-gap polyfluorene for optoelectronic devices | 3.4 | 132 | Citations (PDF) |
| 223 | Stoichiometry dependence of charge transport in polymer/methanofullerene and polymer/C derivative based solar cells | 2.0 | 44 | Citations (PDF) |
| 224 | A polymer photodiode using vapour-phase polymerized PEDOT as an anode | 4.8 | 79 | Citations (PDF) |
| 225 | Theoretical models and experimental results on the temperature dependence of polyfluorene solar cells | 4.8 | 8 | Citations (PDF) |
| 226 | Polymer solar cells with low-bandgap polymers blended with C-derivative give photocurrent at 1 μm | 1.6 | 57 | Citations (PDF) |
| 227 | Evaluation of active materials designed for use in printable electrochromic polymer displays | 1.6 | 32 | Citations (PDF) |
| 228 | Influence of Solvent Mixing on the Morphology and Performance of Solar Cells Based on Polyfluorene Copolymer/Fullerene Blends | 12.1 | 442 | Citations (PDF) |
| 229 | Low-Bandgap Alternating Fluorene Copolymer/Methanofullerene Heterojunctions in Efficient Near-Infrared Polymer Solar Cells | 17.8 | 324 | Citations (PDF) |
| 230 | Polymer Solar Cells Based on a Low-Bandgap Fluorene Copolymer and a Fullerene Derivative with Photocurrent Extended to 850 nm | 12.1 | 233 | Citations (PDF) |
| 231 | Enhanced Photocurrent Spectral Response in Low-Bandgap Polyfluorene and C70-Derivative-Based Solar Cells | 12.1 | 166 | Citations (PDF) |
| 232 | Multilayer formation in spin-coated thin films of low-bandgap polyfluorene:PCBM blends | 1.6 | 105 | Citations (PDF) |
| 233 | High carrier mobility in low band gap polymer-based field-effect transistors | 2.4 | 54 | Citations (PDF) |
| 234 | Recombination studies in a polyfluorene copolymer for photovoltaic applications | 3.4 | 12 | Citations (PDF) |
| 235 | Design, Synthesis and Properties of Low Band Gap Polyfluorenes for Photovoltaic Devices | 3.4 | 91 | Citations (PDF) |
| 236 | The electronic states of polyfluorene copolymers with alternating donor-acceptor units Available to Purchase | 2.2 | 273 | Citations (PDF) |
| 237 | Influence of buffer layers on the performance of polymer solar cells | 2.4 | 120 | Citations (PDF) |
| 238 | Infrared photocurrent spectral response from plastic solar cell with low-band-gap polyfluorene and fullerene derivative | 2.4 | 209 | Citations (PDF) |
| 239 | 1 micron wavelength photo- and electroluminescence from a conjugated polymer | 2.4 | 88 | Citations (PDF) |
| 240 | Low bandgap alternating polyfluorene copolymers in plastic photodiodes and solar cells | 2.1 | 174 | Citations (PDF) |
| 241 | Electrophosphorescence from substituted poly(thiophene) doped with iridium or platinum complex | 1.6 | 28 | Citations (PDF) |
| 242 | Correlation between oxidation potential and open-circuit voltage of composite solar cells based on blends of polythiophenes/ fullerene derivative Available to Purchase | 2.4 | 439 | Citations (PDF) |
| 243 | Electrochemical bandgaps of substituted polythiophenes† | 7.7 | 308 | Citations (PDF) |
| 244 | A Soluble Donor–Acceptor Double-Cable Polymer: Polythiophene with Pendant Fullerenes | 1.4 | 29 | Citations (PDF) |
| 245 | Photophysics of thiophene based polymers in solution: The role of nonradiative decay processes | 2.2 | 91 | Citations (PDF) |
| 246 | Photodiodes and solar cells based on the n-type polymer poly(pyridopyrazine vinylene) as electron acceptor | 3.4 | 40 | Citations (PDF) |
| 247 | Light amplification in polymer field effect transistor structures | 1.6 | 25 | Citations (PDF) |
| 248 | Optical amplification of the cutoff mode in planar asymmetric polymer waveguides | 2.4 | 18 | Citations (PDF) |
| 249 | Photovoltaic devices based on photo induced charge transfer in polythiophene: CN-PPV blends | 1.1 | 7 | Citations (PDF) |
| 250 | Catalytic oxidation of hydrogen on free platinum clusters | 2.2 | 43 | Citations (PDF) |
| 251 | Conformational transitions of a free amino-acid-functionalized polythiophene induced by different buffer systems | 1.6 | 56 | Citations (PDF) |
| 252 | Synthesis and Characterization of Soluble and n-Dopable Poly(quinoxaline vinylene)s and Poly(pyridopyrazine vinylene)s with Relatively Small Band Gap | 3.9 | 57 | Citations (PDF) |
| 253 | Synthesis of Soluble Phenyl-Substituted Poly(p-phenylenevinylenes) with a Low Content of Structural Defects | 3.9 | 41 | Citations (PDF) |
| 254 | Electrochemical and Photophysical Properties of a Novel Polythiophene with Pendant Fulleropyrrolidine Moieties: Toward “Double Cable” Polymers for Optoelectronic Devices | 2.1 | 83 | Citations (PDF) |
| 255 | Synthesis and characterization of poly(quinoxaline vinylene)s and poly(pyridopyrazine vinylene)s with phenyl substituted side-groups | 3.4 | 14 | Citations (PDF) |
| 256 | Photoinduced Electron Transfer in Donor−Acceptor Double-Cable Polymers: Polythiophene Bearing Tetracyanoanthraquinodimethane Moieties | 1.9 | 40 | Citations (PDF) |
| 257 | Synthesis and Characterization of Poly(pyridine vinylene) via the Sulfinyl Precursor Route | 3.9 | 29 | Citations (PDF) |
| 258 | Influence of Polymerization Temperature on Molecular Weight, Photoluminescence, and Electroluminescence for a Phenyl-Substituted Poly(p-phenylenevinylene) | 3.9 | 31 | Citations (PDF) |
| 259 | Intra- and Interchain Luminescence in Amorphous and Semicrystalline Films of Phenyl-Substituted Polythiophene | 2.1 | 54 | Citations (PDF) |
| 260 | Synthesis and Characterization of Polyfluorenes with Light-Emitting Segments | 3.9 | 20 | Citations (PDF) |
| 261 | Luminescence quenching by inter-chain aggregates in substituted polythiophenes | 3.5 | 38 | Citations (PDF) |
| 262 | Lasing in a Microcavity with an Oriented Liquid-Crystalline Polyfluorene Copolymer as Active Layer | 17.8 | 44 | Citations (PDF) |
| 263 | Soluble Polythiophenes with Pendant Fullerene Groups as Double Cable Materials for Photodiodes | 17.8 | 159 | Citations (PDF) |
| 264 | The effect of conjugation length on triplet energies, electron delocalization and electron–electron correlation in soluble polythiophenes | 2.2 | 63 | Citations (PDF) |
| 265 | Influence of disorder on the photoinduced excitations in phenyl substituted polythiophenes | 2.2 | 35 | Citations (PDF) |
| 266 | The Influence of Ordering on the Photoinduced Charge Transfer in Composites of Phenyl-type Substituted Polythiophenes with Methanofullerenes | 0.1 | 0 | Citations (PDF) |
| 267 | Trapping Light in Polymer Photodiodes with Soft Embossed Gratings | 17.8 | 165 | Citations (PDF) |
| 268 | Excitation Transfer in Polymer Photodiodes for Enhanced Quantum Efficiency | 17.8 | 57 | Citations (PDF) |
| 269 | Polymer Photovoltaic Devices from Stratified Multilayers of Donor–Acceptor Blends | 17.8 | 100 | Citations (PDF) |
| 270 | The use of combinatorial materials development for polymer solar cells | 1.9 | 24 | Citations (PDF) |
| 271 | Self organised polymer photodiodes for extended spectral coverage | 1.6 | 14 | Citations (PDF) |
| 272 | Ultrafast photogeneration of inter-chain charge pairs in polythiophene films | 2.1 | 82 | Citations (PDF) |
| 273 | Luminescence probing of crystallization in a polymer film | 1.6 | 6 | Citations (PDF) |
| 274 | Characteristics of polythiophene surface light emitting diodes | 3.4 | 40 | Citations (PDF) |
| 275 | A convenient synthetic route to poly(-phenylene-1,2-diphenylvinylenes) | 3.4 | 8 | Citations (PDF) |
| 276 | A novel polythiophene with pendant fullerenes: toward donor/acceptor double-cable polymers | 2.9 | 102 | Citations (PDF) |
| 277 | Synthesis and Characterization of Highly Soluble Phenyl-Substituted Poly(p-phenylenevinylenes) | 3.9 | 79 | Citations (PDF) |
| 278 | Structural Ordering in Phenyl-Substituted Polythiophenes | 3.9 | 57 | Citations (PDF) |
| 279 | Photoluminescence quenching at a polythiophene/C60 heterojunction | 2.5 | 228 | Citations (PDF) |
| 280 | Controlling inter-chain and intra-chain excitations of a poly(thiophene) derivative in thin films | 2.1 | 43 | Citations (PDF) |
| 281 | Lasing in substituted polythiophene between dielectric mirrors | 3.4 | 8 | Citations (PDF) |
| 282 | Light-Emitting Electrochemical Cells from Oligo(ethylene oxide)-Substituted Polythiophenes: Evidence for in Situ Doping | 4.8 | 61 | Citations (PDF) |
| 283 | Photophysics of Substituted Polythiophenes | 2.1 | 136 | Citations (PDF) |
| 284 | Substituted polythiophenes designed for optoelectronic devices and conductors | 7.7 | 243 | Citations (PDF) |
| 285 | A polythiophene microcavity laser | 2.1 | 106 | Citations (PDF) |
| 286 | NO on copper clusters | 2.1 | 22 | Citations (PDF) |
| 287 | Synthesis and Properties of a Soluble Conjugated Poly(azomethine) with High Molecular Weight | 3.9 | 80 | Citations (PDF) |
| 288 | Laminated fabrication of polymeric photovoltaic diodes | 31.8 | 1,271 | Citations (PDF) |
| 289 | Polymer Light-Emitting Electrochemical Cells with Frozen p-i-n Junction at Room Temperature | 17.8 | 115 | Citations (PDF) |
| 290 | High Quantum Efficiency Polythiophene | 17.8 | 204 | Citations (PDF) |
| 291 | N2 on tungsten clusters: Molecular and dissociative adsorption | 2.2 | 35 | Citations (PDF) |
| 292 | “Plastic” lasers: Comparison of gain narrowing with a soluble semiconducting polymer in waveguides and microcavities | 2.4 | 112 | Citations (PDF) |
| 293 | Stimulated emission and lasing in solid films of conjugated polymers: ultrafast photophysics and photon confinement via scattering | 1.7 | 13 | Citations (PDF) |
| 294 | Light‐Emitting Electrochemical Cells with Crown Ether as Solid Electrolyte | 2.3 | 78 | Citations (PDF) |
| 295 | Self organizing polymer films—a route to novel electronic devices based on conjugated polymers | 0.6 | 34 | Citations (PDF) |
| 296 | Observation of stimulated emission and ultrafast transient absorption dynamics from a novel alkyl-substituted PPV | 3.4 | 1 | Citations (PDF) |
| 297 | Plastic lasers: Semiconducting polymers as a new class of solid-state laser materials | 3.4 | 150 | Citations (PDF) |
| 298 | Photodiode performance and nanostructure of polythiophene/C60 blends | 17.8 | 185 | Citations (PDF) |
| 299 | Ultrafast studies of stimulated emission and gain in solid films of conjugated polymers | 2.1 | 66 | Citations (PDF) |
| 300 | Ionization potentials of oxidized copper clusters | 2.1 | 17 | Citations (PDF) |
| 301 | Reactivity of Fen, Con, and Cun Clusters with O2 and D2 Studied at Single-Collision Conditions | 3.1 | 74 | Citations (PDF) |
| 302 | CO on copper clusters: Orbital symmetry rules | 2.5 | 40 | Citations (PDF) |
| 303 | Polarized electroluminescence from an oriented substituted polythiophene in a light emitting diode | 17.8 | 250 | Citations (PDF) |
| 304 | Ultraviolet electroluminescence from an organic light emitting diode | 17.8 | 77 | Citations (PDF) |
| 305 | X-ray structural studies of various octyl-substituted polythiophenes | 2.0 | 32 | Citations (PDF) |
| 306 | Controlling colour by voltage in polymer light emitting diodes | 3.4 | 85 | Citations (PDF) |
| 307 | Green Electroluminescence in Poly-(3-cyclohexylthiophene) light-emitting diodes | 17.8 | 76 | Citations (PDF) |
| 308 | Light-emitting diodes with variable colours from polymer blends | 31.8 | 760 | Citations (PDF) |
| 309 | White light from an electroluminescent diode made from poly[3(4‐octylphenyl)‐2,2′‐bithiophene] and an oxadiazole derivative | 1.6 | 131 | Citations (PDF) |
| 310 | Thermochromism and optical absorption in Langmuir–Blodgett films of alkyl‐substituted polythiophenes | 1.6 | 56 | Citations (PDF) |
| 311 | Thermal control of near‐infrared and visible electroluminescence in alkyl‐phenyl substituted polythiophenes | 2.4 | 71 | Citations (PDF) |
| 312 | Regioselective polymerization of 3-(4-octylphenyl)thiophene with FeCl3 | 3.9 | 213 | Citations (PDF) |
| 313 | The routes towards processible and stable conducting poly(thiophene)s | 3.4 | 33 | Citations (PDF) |
| 314 | Temperature dependence of the electrical conductivity of potassium-doped polyacetylene as a function of pressure and magnetic field | 2.5 | 19 | Citations (PDF) |
| 315 | Conductivity of oriented polyacetylene doped by alkali metals: Time, temperature, and pressure dependence | 2.5 | 9 | Citations (PDF) |
| 316 | One-Step Preparation of ZnO Electron Transport Layers Functionalized with Benzoic Acid Derivatives | 3.3 | 4 | Citations (PDF) |
| 317 | Prokaryote Fouling Communities on Novel Electrochemically Active Coatings after Submersion in Port Adelaide River Harbor Basin | 3.1 | 0 | Citations (PDF) |
| 318 | The Influence of Solid Additives in the Active Layer on the Thermal Stability of Slot-Die-Coated Organic Photovoltaics | 5.5 | 2 | Citations (PDF) |
| 319 | High-performance PVDF/borophene-based TENG for energy harvesting and self-sustaining health monitoring in manual treadmill systems. | 3.7 | 0 | Citations (PDF) |
| 320 | Automated Identification of Thermal Transitions in Conjugated Material Thin Films Using In Situ Optical Spectroscopy. | 6.0 | 0 | Citations (PDF) |
| 321 | Amorphous Donor Polymers for Thermally Stable Organic Photovoltaics with Dilute Donor Content | 3.9 | 0 | Citations (PDF) |
| 322 | Side Chain Elimination Enables Low-Cost Fused-Ring Acceptors and Reveals a Compact Tetrameric Structure for High-Photocurrent Organic Solar Cells. | 7.8 | 0 | Citations (PDF) |
| 323 | Automated Identification of Thermal Transitions in Conjugated Material Thin Films Using In Situ Optical Spectroscopy (Small Methods 14/2026) | 6.0 | 0 | Citations (PDF) |
