| 1 | Recent progress in catalysts for sustainable hydrogen production: A comprehensive review | 23.1 | 8 | Citations (PDF) |
| 2 | Determination of surface free energy and acido-basicity of MXene materials measured by inverse gas chromatography at infinite dilution | 10.7 | 14 | Citations (PDF) |
| 3 | A new method for conductivity prediction in polymer carbon nanofiber system by the interphase size and total conductivity of constituents | 4.1 | 0 | Citations (PDF) |
| 4 | Harnessing the potential of coal-derived graphene oxide/epoxy nanocomposites: Enhancing thermal conductivity and fracture toughness | 6.6 | 4 | Citations (PDF) |
| 5 | A predictive model for electrical conductivity of polymer carbon nanofiber composites considering nanofiber/interphase network and tunneling dimensions | 6.1 | 13 | Citations (PDF) |
| 6 | A predictive model for electrical conductivity of polymer carbon black nanocomposites | 4.9 | 13 | Citations (PDF) |
| 7 | Recent advances in phosphorene: A promising material for supercapacitor applications | 24.7 | 41 | Citations (PDF) |
| 8 | A model for effective conductivity of polymer nanocomposites containing MXene nanosheets | 4.9 | 11 | Citations (PDF) |
| 9 | Solvent-free valorization of sugarcane bagasse fibers into nitrogen-doped microporous carbons: Efficient contenders for selective carbon dioxide capture | 7.9 | 9 | Citations (PDF) |
| 10 | Unveiling the impact of interphase properties on the modulus of composites reinforced with nanodiamond: Defining an interfacial adhesion parameter | 3.2 | 2 | Citations (PDF) |
| 11 | Advances in Catalysts for Hydrogen Production: A Comprehensive Review of Materials and Mechanisms | 4.0 | 63 | Citations (PDF) |
| 12 | Steam activation of pitch-based carbon fibers for increasing CO2 adsorption behaviors | 9.3 | 18 | Citations (PDF) |
| 13 | Enhanced carbon quantum dots-based chemiluminescence probes for copper ion detection in human plasma and urine | 13.6 | 13 | Citations (PDF) |
| 14 | Cutting‐Edge Optimization Strategies and In Situ Characterization Techniques for Urea Oxidation Reaction Catalysts: A Comprehensive Review | 22.5 | 69 | Citations (PDF) |
| 15 | Advancing conductivity modeling: A unified framework for polymer carbon black nanocomposites | 6.1 | 14 | Citations (PDF) |
| 16 | Advancements in Biochar as a Sustainable Adsorbent for Water Pollution Mitigation | 12.6 | 110 | Citations (PDF) |
| 17 | Controlling of tunneling resistance in carbon nanofiber polymer composites: A novel equation for polymer tunneling resistivity by quantifiable parameters | 6.1 | 16 | Citations (PDF) |
| 18 | Solid-State Electrolytes and Their Interfacial Properties: Implications for Solid-State Lithium Batteries | 31.5 | 49 | Citations (PDF) |
| 19 | Simultaneous synthesis of multiple functional carbon emitters and their biosensing applications | 19.8 | 4 | Citations (PDF) |
| 20 | Analyzing the acido-basicity of anodically treated carbon fibers using inverse gas chromatography at infinite dilution | 7.4 | 2 | Citations (PDF) |
| 21 | Hemp fiber and its bio-composites: a comprehensive review part I—characteristics and processing | 19.8 | 27 | Citations (PDF) |
| 22 | Diversified functional applications of flexible metal-organic frameworks | 5.0 | 6 | Citations (PDF) |
| 23 | Advancements in flexible Perovskite solar cells and their integration into self-powered wearable optoelectronic systems | 13.0 | 16 | Citations (PDF) |
| 24 | Strengthening efficacy of spherical starch nanoparticles and surrounding interphase in polymer nanocomposites | 8.1 | 3 | Citations (PDF) |
| 25 | Robust Molybdenum Telluride and Iron Manganese Telluride Heteronanowire Electrocatalysts for Sustainable Hydrogen Production | 11.5 | 5 | Citations (PDF) |
| 26 | Bifunctional electrocatalysts for Zn–air batteries: A comprehensive review of design optimization and in-situ characterization | 24.7 | 18 | Citations (PDF) |
| 27 | Bridging the nano-scale interphase with macro-scale properties: Two-step simulating of electrical conductivity for polymer composites incorporating carbon nanofibers | 6.1 | 17 | Citations (PDF) |
| 28 | Titanate-Coupled Aluminum as an Interfacial Modifier for Enhanced Thermal and Mechanical Performance in Hybrid Epoxy Composites | 4.5 | 2 | Citations (PDF) |
| 29 | Hydrogen Bond-Interlocked Conductive Polymeric Networks with Integrated Rigidity and Flexibility: Empowering the Stable Functioning of Silicon–Carbon Anodes | 8.0 | 4 | Citations (PDF) |
| 30 | Unveiling pore size contributions and host-guest interactions in methane adsorption under varying pressure conditions: a semi-empirical adsorption model | 7.4 | 2 | Citations (PDF) |
| 31 | Decrypting of effective resistance for composites of polymer-carbon nanofiber: An applicable approach to regulate the electrical conductivity | 6.1 | 14 | Citations (PDF) |
| 32 | Analysis of mechanical properties and fracture mechanism in LM30 Al alloy composites with single and dual size reinforcements | 6.1 | 0 | Citations (PDF) |
| 33 | Simulation of electrical conductivity for polymer carbon nanofiber composites assuming an extended nanofiber by interphase depth and tunneling distance | 3.4 | 18 | Citations (PDF) |
| 34 | Valorization of waste coffee grounds into microporous carbon materials for CO2 adsorption | 9.1 | 30 | Citations (PDF) |
| 35 | Recent advances in polymeric and small molecule donor materials for Y6 based organic solar cells | 3.9 | 15 | Citations (PDF) |
| 36 | Flexible N-doped heterostructure of cobalt sulfide and cobalt oxide composite electrodes derived from metal-organic frameworks and their electrochemical behaviors | 4.8 | 12 | Citations (PDF) |
| 37 | Enhanced Electrical Properties and Impact Strength of Phenolic Formaldehyde Resin Using Silanized Graphene and Ionic Liquid | 4.2 | 9 | Citations (PDF) |
| 38 | Experimental tribological and mechanical behavior of aluminium alloy 6061 composites incorporated ceramic particulates using Taguchi analysis | 6.1 | 45 | Citations (PDF) |
| 39 | Recent progress in graphene and its derived hybrid materials for high-performance supercapacitor electrode applications | 4.4 | 88 | Citations (PDF) |
| 40 | Effects of a deficient interface, tunneling size and interphase depth on the percolation inception, percentage of graphene in the nets and conductivity of nanocomposites | 4.8 | 13 | Citations (PDF) |
| 41 | High Efficiency of Ternary Blend Organic Solar Cells with a BTP-4F/BTP-4H Derivative | 5.4 | 11 | Citations (PDF) |
| 42 | Compatibilization of ultra-high molecular weight polyethylene (UHMWPE) fibers and their composites for superior mechanical performance: A concise review | 12.8 | 82 | Citations (PDF) |
| 43 | A review of ternary polymer nanocomposites containing clay and calcium carbonate and their biomedical applications | 5.5 | 4 | Citations (PDF) |
| 44 | Facile production of highly porous graphitic nanosheets for enhanced hydrogen storage | 12.0 | 12 | Citations (PDF) |
| 45 | A Review of Rechargeable Zinc–Air Batteries: Recent Progress and Future Perspectives | 30.1 | 253 | Citations (PDF) |
| 46 | TiO2/Multi-walled carbon nanotube electrospun nanofibers mats for enhanced Cr(VI) photoreduction | 9.5 | 19 | Citations (PDF) |
| 47 | Role of ilmenite particles on high temperature wear behavior and coefficient of friction of LM30 aluminium alloy composites | 4.4 | 10 | Citations (PDF) |
| 48 | Carbon-based composites in biomedical applications: a comprehensive review of properties, applications, and future directions | 19.8 | 70 | Citations (PDF) |
| 49 | Dye-sensitized solar cells: Fundamentals, recent progress, and Optoelectrical properties improvement strategies | 3.9 | 60 | Citations (PDF) |
| 50 | Facile preparation of thermally conductive fiber film by self‐assembling interconnected boron nitride nanosheets for effective thermal interface materials | 4.9 | 7 | Citations (PDF) |
| 51 | Recent Progress and Challenges in Paper-Based Microsupercapacitors for Flexible Electronics: A Comprehensive Review | 8.0 | 18 | Citations (PDF) |
| 52 | Functionalized MXene ink enables environmentally stable printed electronics | 13.7 | 64 | Citations (PDF) |
| 53 | Recent laser advances in graphene-based planar micro-supercapacitors: Challenges and future prospects | 3.7 | 5 | Citations (PDF) |
| 54 | A review of the emerging approaches for developing multi‐scale filler‐reinforced epoxy nanocomposites with enhanced impact performance | 4.9 | 24 | Citations (PDF) |
| 55 | Carbon molecular sieves-confined Al/Ni nanocatalysts for enhanced nitrogen oxide direct decomposition | 0.0 | 2 | Citations (PDF) |
| 56 | Advancements in hydrogen storage technologies: A comprehensive review of materials, methods, and economic policy | 9.9 | 157 | Citations (PDF) |
| 57 | Advanced modeling of conductivity in graphene–polymer nanocomposites: insights into interface and tunneling characteristics | 4.9 | 6 | Citations (PDF) |
| 58 | Advancements in Asymmetric Supercapacitors: From Historical Milestones to Challenges and Future Directions | 12.6 | 127 | Citations (PDF) |
| 59 | Carbon materials and their metal composites for biomedical applications: A short review | 5.0 | 37 | Citations (PDF) |
| 60 | Emerging trends in MXene-polymer composites for electromagnetic shielding applications | 6.8 | 30 | Citations (PDF) |
| 61 | Strategic structural design of transition metal electrocatalysts for efficient water splitting: A comprehensive review | 9.9 | 32 | Citations (PDF) |
| 62 | Ionic Liquid-Modified Copper for the Enhanced Thermal Conductivity and Mechanical Properties of Epoxy Resin/Expanded Graphite Composites | 4.2 | 2 | Citations (PDF) |
| 63 | Copper-doped zinc cobalt sulfide nanosheets as advanced bifunctional electrocatalysts for sustainable hydrogen production via electrochemical water splitting | 19.8 | 23 | Citations (PDF) |
| 64 | Recent advances in improvement of thermal conductivity of epoxy-based nanocomposites through addition of fillers | 4.1 | 17 | Citations (PDF) |
| 65 | Review of Wear and Mechanical Characteristics of Al-Si Alloy Matrix Composites Reinforced with Natural Minerals | 2.5 | 36 | Citations (PDF) |
| 66 | A comprehensive review of carbon-based air cathode materials for advanced non-aqueous lithium–air batteries | 18.1 | 12 | Citations (PDF) |
| 67 | Multi-scale prediction of effective conductivity for carbon nanofiber polymer composites | 6.1 | 31 | Citations (PDF) |
| 68 | Optimizing conductive properties of polymer carbon nanofiber composites: Insights from an extended Hui-Shia model | 5.4 | 8 | Citations (PDF) |
| 69 | Exploring the Impact of Nanoclay on Epoxy Nanocomposites: A Comprehensive Review | 3.3 | 26 | Citations (PDF) |
| 70 | Conduction transportation from graphene to an insulative polymer medium: A novel approach for the conductivity of nanocomposites | 5.5 | 1 | Citations (PDF) |
| 71 | Bimetallic CuPd alloy nanoparticles decorated ZnO nanosheets with enhanced photocatalytic degradation of methyl orange dye | 9.9 | 71 | Citations (PDF) |
| 72 | A modified version of conventional Halpin-Tsai model for the tensile modulus of polymer halloysite nanotube nanocomposites by filler network and nearby interphase | 3.2 | 12 | Citations (PDF) |
| 73 | Improved thermal conductivity of epoxy resins using silane coupling agent‐modified expanded graphite | 2.7 | 18 | Citations (PDF) |
| 74 | Electrochemical behaviors of binder-free CoFe-layered double-hydroxide-decorated hexagonal-flower-like NiCo2O4 as electrode for supercapacitors | 6.0 | 17 | Citations (PDF) |
| 75 | Graphene-Based Electrochemical Biosensors for Breast Cancer Detection | 4.9 | 87 | Citations (PDF) |
| 76 | Simulating Electrical Conductivity of Graphene-Filled System by Developing McLachlan Model Applicable to Breast Cancer Biosensors | 2.0 | 0 | Citations (PDF) |
| 77 | Significances of effective interphase characteristics on the Pukanszky interfacial factor and strength of halloysite-containing composites after mechanical percolation onset | 3.2 | 3 | Citations (PDF) |
| 78 | Effect of Ambient Plasma Treatments on Thermal Conductivity and Fracture Toughness of Boron Nitride Nanosheets/Epoxy Nanocomposites | 4.0 | 8 | Citations (PDF) |
| 79 | Progressing of a power model for electrical conductivity of graphene-based composites | 3.4 | 35 | Citations (PDF) |
| 80 | Rice husk valorization into sustainable Ni@TiO2/biochar nanocomposite for highly selective Pb (II) ions removal from an aqueous media | 8.2 | 28 | Citations (PDF) |
| 81 | Amine functionalization on thermal and mechanical behaviors of graphite nanofibers-loaded epoxy composites | 13.6 | 23 | Citations (PDF) |
| 82 | Defect and interface engineering of MXene-tagged N,F-doped carbon-CoSe2 heterostructure for superior hydrogen evolution reactions and supercapacitors | 10.7 | 63 | Citations (PDF) |
| 83 | Highly Porous Carbon Aerogels for High-Performance Supercapacitor Electrodes | 4.0 | 30 | Citations (PDF) |
| 84 | Highly Oxidation‐Resistant and Self‐Healable MXene‐Based Hydrogels for Wearable Strain Sensor | 17.0 | 170 | Citations (PDF) |
| 85 | Determination of Hydrophobic Dispersive Surface Free Energy of Activated Carbon Fibers Measured by Inverse Gas Chromatographic Technique | 4.0 | 11 | Citations (PDF) |
| 86 | Simulating of effective conductivity for graphene–polymer nanocomposites | 3.4 | 21 | Citations (PDF) |
| 87 | A Review on Interface Engineering of MXenes for Perovskite Solar Cells | 30.1 | 122 | Citations (PDF) |
| 88 | Nitrogen and iron co-doped carbon quantum dots/MnO2 nanowire composites for flexible solid-state supercapacitors with high areal capacitance | 6.0 | 8 | Citations (PDF) |
| 89 | MgAl-layered double hydroxides decorated with Pd-doped SnS nanoparticles: A novel photocatalyst for efficient dye degradation and Cr(VI) reduction in water | 5.8 | 17 | Citations (PDF) |
| 90 | Controllable construction of CNT-Interconnected liquid metal networks for thermal management | 8.1 | 40 | Citations (PDF) |
| 91 | The influences of diameter distribution change of zeolitic imidazolate framework‐67 crystal on electrochemical behavior for lithium‐sulfur cell cathode | 3.8 | 0 | Citations (PDF) |
| 92 | The role of fillers to enhance the mechanical, thermal, and wear characteristics of polymer composite materials: A review | 8.1 | 273 | Citations (PDF) |
| 93 | Selection and ranking of dental restorative composite materials using hybrid Entropy-VIKOR method: An application of MCDM technique | 3.3 | 76 | Citations (PDF) |
| 94 | Carbon‐Based Radar Absorbing Materials toward Stealth Technologies | 12.6 | 373 | Citations (PDF) |
| 95 | Surfactant-Capped Silver-Doped Calcium Oxide Nanocomposite: Efficient Sorbents for Rapid Lithium Uptake and Recovery from Aqueous Media | 2.7 | 13 | Citations (PDF) |
| 96 | Tribological behavior of dental resin composites: A comprehensive review | 6.1 | 42 | Citations (PDF) |
| 97 | Facile synthesis of a GO-g-C3N4/BaTiO3 ternary nanocomposites for visible-light-driven photocatalytic degradation of rhodamine B | 8.2 | 20 | Citations (PDF) |
| 98 | Electrochemical micro- and nanobiosensors for
in vivo
reactive oxygen/nitrogen species measurement in the brain | 5.5 | 4 | Citations (PDF) |
| 99 | Enhanced thermal conductivity of carbon fibers/silanized graphene/epoxy matrix composites | 4.9 | 13 | Citations (PDF) |
| 100 | Thioacetamide-derived nitrogen and sulfur co-doped carbon quantum dots for “green” quantum dot solar cells | 5.8 | 54 | Citations (PDF) |
| 101 | Interfacial interaction of graphitic carbon nitride/nanodiamond nanocomposites toward synergistic enhancement of photocatalytic degradation of organic contaminants | 9.9 | 16 | Citations (PDF) |
| 102 | Formulation of interfacial parameter in Kolarik model by aspect ratio of carbon nanotubes and interfacial shear strength to simulate the tensile strength of carbon‐nanotube‐based systems | 4.9 | 1 | Citations (PDF) |
| 103 | Hybrid biochar supported transition metal doped MnO2 composites: Efficient contenders for lithium adsorption and recovery from aqueous solutions | 9.3 | 74 | Citations (PDF) |
| 104 | Chemically modified sugarcane bagasse-based biocomposites for efficient removal of acid red 1 dye: Kinetics, isotherms, thermodynamics, and desorption studies | 8.2 | 121 | Citations (PDF) |
| 105 | Highly efficient reduction of aqueous Cr(VI) with novel ZnO/SnS nanocomposites through the piezoelectric effect | 6.8 | 31 | Citations (PDF) |
| 106 | Thermal and mechanical properties of poly(latic acid) reinforced with silanized basalt scales | 2.9 | 5 | Citations (PDF) |
| 107 | Enhanced electrical conductivity and electromagnetic shielding efficiency of epoxy resin using graphene nanoplatelets | 2.9 | 13 | Citations (PDF) |
| 108 | Improved thermal conductivity and mechanical property of mercapto group-activated boron nitride/elastomer composites for thermal management | 8.1 | 65 | Citations (PDF) |
| 109 | Thermal and electrical conductivity improvement in epoxy resin with expanded graphite and silver plating | 2.9 | 14 | Citations (PDF) |
| 110 | Recent Progress Using Solid-State Materials for Hydrogen Storage: A Short Review | 2.5 | 191 | Citations (PDF) |
| 111 | Flexible solid-state hybrid supercapacitors for the internet of everything (IoE) | 30.8 | 211 | Citations (PDF) |
| 112 | Eucalyptus (camaldulensis) bark-based composites for efficient Basic Blue 41 dye biosorption from aqueous stream: Kinetics, isothermal, and thermodynamic studies | 3.2 | 46 | Citations (PDF) |
| 113 | Synthesis of the ionic liquid 1,2‐dimethyl‐3‐butylimidazole bromide salt and its application in phenolic‐formaldehyde‐resin‐based conductive materials | 2.7 | 4 | Citations (PDF) |
| 114 | Two-Stage Modeling of Tensile Strength for a Carbon-Nanotube-Based System Applicable in the Biomedical Field | 2.0 | 10 | Citations (PDF) |
| 115 | Bimetallic CuPd nanoparticle-decorated MgAl-LDH/g-C3N4 composites for efficient photocatalytic reduction of aqueous Cr(VI) | 5.8 | 24 | Citations (PDF) |
| 116 | Self-activated, urea modified microporous carbon cryogels for high-performance CO2 capture and separation | 10.7 | 92 | Citations (PDF) |
| 117 | Promoted charge separation and specific surface area
via
interlacing of N-doped titanium dioxide nanotubes on carbon nitride nanosheets for photocatalytic degradation of Rhodamine B | 5.5 | 16 | Citations (PDF) |
| 118 | A Study on Pre-Oxidation of Petroleum Pitch-Based Activated Carbons for Electric Double-Layer Capacitors | 4.2 | 10 | Citations (PDF) |
| 119 | Nitrogen and Sulfur Co-Doped Graphene Quantum Dots Anchored TiO2 Nanocomposites for Enhanced Photocatalytic Activity | 3.7 | 28 | Citations (PDF) |
| 120 | Supercapacitor performance based on nitrogen and sulfur co‐doped hierarchically porous carbons: Superior rate capability and cycle stability | 4.5 | 60 | Citations (PDF) |
| 121 | Effective Conductivity of Carbon-Nanotube-Filled Systems by Interfacial Conductivity to Optimize Breast Cancer Cell Sensors | 4.0 | 1 | Citations (PDF) |
| 122 | Tensile Modulus of Polymer Halloysite Nanotube Systems Containing Filler–Interphase Networks for Biomedical Requests | 2.8 | 3 | Citations (PDF) |
| 123 | Electrocatalytic and photocatalytic sustainable conversion of carbon dioxide to value-added chemicals: State-of-the-art progress, challenges, and future directions | 6.1 | 41 | Citations (PDF) |
| 124 | Innovative progress in graphene derivative-based composite hybrid membranes for the removal of contaminants in wastewater: A review | 8.2 | 65 | Citations (PDF) |
| 125 | Solvent-free conversion of cucumber peels to N-doped microporous carbons for efficient CO2 capture performance | 9.5 | 61 | Citations (PDF) |
| 126 | Valorization of orange peel waste to tunable heteroatom-doped hydrochar-derived microporous carbons for selective CO2 adsorption and separation | 8.3 | 119 | Citations (PDF) |
| 127 | Surface energetics of graphene oxide and reduced graphene oxide determined by inverse gas chromatographic technique at infinite dilution at room temperature | 9.9 | 26 | Citations (PDF) |
| 128 | Encapsulation strategies for improving the biological behavior of CdS@ZIF-8 nanocomposites | 5.5 | 5 | Citations (PDF) |
| 129 | Paper-Derived Millimeter-Thick Yarn Supercapacitors Enabling High Volumetric Energy Density | 8.0 | 23 | Citations (PDF) |
| 130 | Enhanced thermal stability and impact strength of phenolic formaldehyde resin using acid‐treated basalt scales | 2.7 | 10 | Citations (PDF) |
| 131 | Mango Seed-Derived Hybrid Composites and Sodium Alginate Beads for the Efficient Uptake of 2,4,6-Trichlorophenol from Simulated Wastewater | 3.7 | 17 | Citations (PDF) |
| 132 | Stabilization of Perovskite Solar Cells: Recent Developments and Future Perspectives | 24.5 | 244 | Citations (PDF) |
| 133 | Highly Flexible Fabrics/Epoxy Composites with Hybrid Carbon Nanofillers for Absorption-Dominated Electromagnetic Interference Shielding | 30.1 | 77 | Citations (PDF) |
| 134 | A Review on MXene Synthesis, Stability, and Photocatalytic Applications | 15.3 | 603 | Citations (PDF) |
| 135 | Interfacial Behaviors of Basalt Fiber-Reinforced Polymeric Composites: A Short Review | 19.0 | 90 | Citations (PDF) |
| 136 | Co3O4 nanoparticles embedded in electrospun carbon nanofibers as free-standing nanocomposite electrodes as highly sensitive enzyme-free glucose biosensors | 2.8 | 17 | Citations (PDF) |
| 137 | Recent Advanced Supercapacitor: A Review of Storage Mechanisms, Electrode Materials, Modification, and Perspectives | 4.0 | 351 | Citations (PDF) |
| 138 | A Review on Non-Enzymatic Electrochemical Biosensors of Glucose Using Carbon Nanofiber Nanocomposites | 4.9 | 57 | Citations (PDF) |
| 139 | Positive/Negative Temperature Coefficient Behaviors of Electron Beam-Irradiated Carbon Blacks-Loaded Polyethylene Nanocomposites | 4.2 | 12 | Citations (PDF) |
| 140 | Solvent-free, one-pot synthesis of nitrogen-tailored alkali-activated microporous carbons with an efficient CO2 adsorption | 10.7 | 197 | Citations (PDF) |
| 141 | Synergistic reinforcing of poly(lactic acid) by poly(butylene adipate‐co‐terephthalate) and alumina nanoparticles | 2.7 | 26 | Citations (PDF) |
| 142 | Phosphorization-derived MoP@MoO3-x nanowires for selective photocatalytic oxidation of benzyl alcohol to benzaldehyde | 6.5 | 49 | Citations (PDF) |
| 143 | Nanostructured multifunctional electrocatalysts for efficient energy conversion systems: Recent perspectives | 5.5 | 46 | Citations (PDF) |
| 144 | Carboxylated Group Effect of Graphene Oxide on Capacitance Performance of Zr-Based Metal Organic Framework Electrodes | 4.3 | 13 | Citations (PDF) |
| 145 | Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review | 9.5 | 249 | Citations (PDF) |
| 146 | A novel synthesis of ditrimethylolpropane biphosphoramide diethyleneamine as flame retardant and antistatic textiles | 2.9 | 15 | Citations (PDF) |
| 147 | Improvement of Mesoporosity on Supercapacitive Performance of Activated Carbons Derived From Coffee Grounds | 2.1 | 15 | Citations (PDF) |
| 148 | Roles of London Dispersive and Polar Components of Nano-Metal-Coated Activated Carbons for Improving Carbon Dioxide Uptake | 2.5 | 5 | Citations (PDF) |
| 149 | Effect of Atmospheric-Pressure Plasma Treatments on Fracture Toughness of Carbon Fibers-Reinforced Composites | 4.2 | 8 | Citations (PDF) |
| 150 | A comparative study on nanoinclusion effect of MoS2 nanosheets and MoS2 quantum dots on fracture toughness and interfacial properties of epoxy composites | 8.1 | 42 | Citations (PDF) |
| 151 | Acetic acid-mediated cellulose-based carbons: Influence of activation conditions on textural features and carbon dioxide uptakes | 9.9 | 55 | Citations (PDF) |
| 152 | Electrical property improvement of phenolic formaldehyde resin with graphene and ionic liquid | 2.9 | 16 | Citations (PDF) |
| 153 | Ultralong and Millimeter-Thick Graphene Oxide Supercapacitors with High Volumetric Capacitance | 5.4 | 17 | Citations (PDF) |
| 154 | Oxygen-vacancy-rich spinel CoFe2O4 nanocrystals anchored on cage-like carbon for high-performance oxygen electrocatalysis | 2.9 | 7 | Citations (PDF) |
| 155 | Effect of ambient plasma treatment on single-walled carbon nanotubes-based epoxy/fabrics for improving fracture toughness and electromagnetic shielding effectiveness | 8.1 | 31 | Citations (PDF) |
| 156 | Tensile strength of carbon‐nanotube‐based nanocomposites by the effective characteristics of interphase area nearby the filler network | 4.9 | 14 | Citations (PDF) |
| 157 | A rational design of cellulose-based heteroatom-doped porous carbons: Promising contenders for CO2 adsorption and separation | 12.0 | 168 | Citations (PDF) |
| 158 | Roles of Small Polyetherimide Moieties on Thermal Stability and Fracture Toughness of Epoxy Blends | 4.5 | 16 | Citations (PDF) |
| 159 | Preparation and Catalytic Activity of Platinum Supported on Amine-Functionalized MIL-101 (Fe)/Nitrogen-Doped Carbon Nanotube Composite for Fuel Cells | 0.6 | 4 | Citations (PDF) |
| 160 | Role of heteroatoms (nitrogen and sulfur)-dual doped corn-starch based porous carbons for selective CO2 adsorption and separation | 7.9 | 120 | Citations (PDF) |
| 161 | An applicable model for the modulus of polymer halloysite nanotubes samples by the characteristics of halloysite nanotubes, interphase zone and filler/interphase network | 5.2 | 10 | Citations (PDF) |
| 162 | Polyamide/Chitosan/Tetraethyl Orthosilicate Electrospun Nanofibers for a Novel and Promising Drug Carrier | 0.6 | 1 | Citations (PDF) |
| 163 | Valorization of shrimp shell biowaste for environmental remediation: Efficient contender for CO2 adsorption and separation | 8.2 | 83 | Citations (PDF) |
| 164 | Role of dry ozonization of basalt fibers on interfacial properties and fracture toughness of epoxy matrix composites | 5.5 | 9 | Citations (PDF) |
| 165 | A review on MXenes: new-generation 2D materials for supercapacitors | 3.9 | 130 | Citations (PDF) |
| 166 | Efficient micropore sizes for carbon dioxide physisorption of pine cone-based carbonaceous materials at different temperatures | 7.9 | 25 | Citations (PDF) |
| 167 | Effect of graphene oxide/graphitic nanofiber nanohybrids on interfacial properties and fracture toughness of carbon fibers-reinforced epoxy matrix composites | 12.8 | 60 | Citations (PDF) |
| 168 | A study on interfacial behaviors of epoxy/graphene oxide derived from pitch-based graphite fibers | 5.5 | 15 | Citations (PDF) |
| 169 | A Study on Electron Acceptor of Carbonaceous Materials for Highly Efficient Hydrogen Uptakes | 3.7 | 7 | Citations (PDF) |
| 170 | Recent Advances in MnOx/CeO2-Based Ternary Composites for Selective Catalytic Reduction of NOx by NH3: A Review | 3.7 | 13 | Citations (PDF) |
| 171 | Hydrothermal synthesis of Ag2CO3-TiO2 loaded reduced graphene oxide nanocomposites with highly efficient photocatalytic activity | 2.2 | 16 | Citations (PDF) |
| 172 | Expansion of effective pore size on hydrogen physisorption of porous carbons at low temperatures with high pressures | 10.7 | 35 | Citations (PDF) |
| 173 | An overview of TiO2-based photocatalytic membrane reactors for water and wastewater treatments | 5.8 | 231 | Citations (PDF) |
| 174 | Effects of CNT size, network fraction, and interphase thickness on the tunneling distance between neighboring carbon nanotubes (CNTs) in nanocomposites | 5.8 | 19 | Citations (PDF) |
| 175 | Preparation and characterization of mesoporous activated carbons from nonporous hard carbon via enhanced steam activation strategy | 4.4 | 49 | Citations (PDF) |
| 176 | Influence of carboxymethyl cellulose content on structures and electrochemical behaviors of reduced graphene oxide films | 5.3 | 13 | Citations (PDF) |
| 177 | Functionalized titanate nanotubes for efficient lithium adsorption and recovery from aqueous media | 3.2 | 40 | Citations (PDF) |
| 178 | Single-step solid-state synthesis and characterization of Li4Ti5−xFexO12−y (0 ≤ x ≤ 0.1) as an anode for lithium-ion batteries | 9.3 | 38 | Citations (PDF) |
| 179 | From chitosan to urea-modified carbons: Tailoring the ultra-microporosity for enhanced CO2 adsorption | 10.7 | 184 | Citations (PDF) |
| 180 | Effect of conductivity transportation from carbon nanotubes (CNT) to polymer matrix surrounding CNT on the electrical conductivity of nanocomposites | 4.9 | 10 | Citations (PDF) |
| 181 | Preparation and Capacitance of Ni Metal Organic Framework/Reduced Graphene Oxide Composites for Supercapacitors as Nanoarchitectonics | 0.6 | 24 | Citations (PDF) |
| 182 | The Role of CO2 as a Mild Oxidant in Oxidation and Dehydrogenation over Catalysts: A Review | 3.7 | 32 | Citations (PDF) |
| 183 | Effective Reinforcement of Melamine-functionalized WS2 Nanosheets in Epoxy Nanocomposites at Low Loading via Enhanced Interfacial Interaction | 2.8 | 29 | Citations (PDF) |
| 184 | Sustainable N-doped hierarchical porous carbons as efficient CO2 adsorbents and high-performance supercapacitor electrodes | 7.9 | 95 | Citations (PDF) |
| 185 | Effect of Graphene Oxide on Interfacial Interactions and Fracture Toughness of Basalt Fiber-Reinforced Epoxy Composites | 0.6 | 16 | Citations (PDF) |
| 186 | Phosphorus-doped g-C3N4/SnS nanocomposite for efficient photocatalytic reduction of aqueous Cr(VI) under visible light | 6.6 | 65 | Citations (PDF) |
| 187 | Fracture toughness enhancement of epoxy resin reinforced with graphene nanoplatelets and carbon nanotubes | 2.9 | 31 | Citations (PDF) |
| 188 | Potassium Oxalate as an Alternative Activating Reagent of Corn Starch-Derived Porous Carbons for Methane Storage | 0.6 | 9 | Citations (PDF) |
| 189 | A Role of Activators for Efficient CO2 Affinity on Polyacrylonitrile-Based Porous Carbon Materials | 3.5 | 46 | Citations (PDF) |
| 190 | Synthesis and application of thermal latent initiators of epoxy resins: A review | 2.7 | 81 | Citations (PDF) |
| 191 | Energy-Efficient Tunneling Field-Effect Transistors for Low-Power Device Applications: Challenges and Opportunities | 8.0 | 101 | Citations (PDF) |
| 192 | Nanoflower-like NiCo2O4 grown on biomass carbon coated nickel foam for asymmetric supercapacitor | 6.0 | 79 | Citations (PDF) |
| 193 | State of the art two-dimensional materials-based photodetectors: Prospects, challenges and future outlook | 5.8 | 19 | Citations (PDF) |
| 194 | Electrochemical Behavior Study of Flower-Shaped Bimetal Organic Frameworks with Graphene Oxide for Cathode of Lithium Sulfur Batteries | 0.6 | 7 | Citations (PDF) |
| 195 | Activated Carbon/MnO2 Composites as Electrode for High Performance Supercapacitors | 3.7 | 48 | Citations (PDF) |
| 196 | Tuning ratios of KOH and NaOH on acetic acid-mediated chitosan-based porous carbons for improving their textural features and CO2 uptakes | 7.9 | 100 | Citations (PDF) |
| 197 | MnO2-decorated biochar composites of coconut shell and rice husk: An efficient lithium ions adsorption-desorption performance in aqueous media | 8.2 | 85 | Citations (PDF) |
| 198 | Recent advances in preparations and applications of carbon aerogels: A review | 10.7 | 447 | Citations (PDF) |
| 199 | Simulation of tunneling distance and electrical conductivity for polymer carbon nanotubes nanocomposites by interphase thickness and network density | 4.9 | 7 | Citations (PDF) |
| 200 | Effect of Processing Parameters on the Thermal and Electrical Properties of Electroless Nickel-Phosphorus Plated Carbon Fiber Heating Elements | 2.0 | 7 | Citations (PDF) |
| 201 | Improved impact strength of poly(lactic acid) by incorporating poly(butylene succinate) and silicon dioxide nanoparticles | 2.9 | 19 | Citations (PDF) |
| 202 | Effect of nickel ion doping in MnO2/reduced graphene oxide nanocomposites for lithium adsorption and recovery from aqueous media | 4.4 | 43 | Citations (PDF) |
| 203 | Amine-terminated chain-grafted nanodiamond/epoxy nanocomposites as interfacial materials: Thermal conductivity and fracture resistance | 12.8 | 63 | Citations (PDF) |
| 204 | Effect of ozone-treated single-walled carbon nanotubes on interfacial properties and fracture toughness of carbon fiber-reinforced epoxy composites | 8.1 | 49 | Citations (PDF) |
| 205 | Microwave-assisted acid functionalized carbon nanofibers decorated with Mn doped TNTs nanocomposites: Efficient contenders for lithium adsorption and recovery from aqueous media | 5.8 | 32 | Citations (PDF) |
| 206 | Hydrothermal Preparation of Ag/TiO2/GO Nanocomposites with Ammonia-Treated Graphene Oxide for Enhanced Conductivity | 0.6 | 1 | Citations (PDF) |
| 207 | Advances in layered double hydroxide-based ternary nanocomposites for photocatalysis of contaminants in water | 5.5 | 30 | Citations (PDF) |
| 208 | Synthesis of PAN/PVDF nanofiber composites-based carbon adsorbents for CO2 capture | 12.8 | 79 | Citations (PDF) |
| 209 | Simple model for hydrolytic degradation of poly(lactic acid)/poly(ethylene oxide)/carbon nanotubes nanobiosensor in neutral phosphate‐buffered saline solution | 4.2 | 27 | Citations (PDF) |
| 210 | Facile design of a domestic thermoelectric generator by tailoring the thermoelectric performance of volume-controlled expanded graphite/PVDF composites | 12.8 | 24 | Citations (PDF) |
| 211 | Modeling the roles of carbon nanotubes and interphase dimensions in the conductivity of nanocomposites | 4.0 | 74 | Citations (PDF) |
| 212 | Activated Carbons from Thermoplastic Precursors and Their Energy Storage Applications | 4.0 | 14 | Citations (PDF) |
| 213 | In vitro antiproliferative study of curcumin loaded nano zeolitic imidazolate framework hybrid biomaterials on HeLa cells | 5.8 | 10 | Citations (PDF) |
| 214 | One-Step Synthesis of Silver Nanoparticles Embedded Polyurethane Nano-Fiber/Net Structured Membrane as an Effective Antibacterial Medium | 4.5 | 71 | Citations (PDF) |
| 215 | Effect of Morphology of Calcium Carbonate on Toughness Behavior and Thermal Stability of Epoxy-Based Composites | 2.5 | 47 | Citations (PDF) |
| 216 | Synthesis and application of a polymeric intumescent flame retardant for cotton fabric | 1.9 | 9 | Citations (PDF) |
| 217 | Deformation of Single Crystals, Polycrystalline Materials, and Thin Films: A Review | 2.8 | 93 | Citations (PDF) |
| 218 | Drug Delivery Applications of Core-Sheath Nanofibers Prepared by Coaxial Electrospinning: A Review | 4.9 | 394 | Citations (PDF) |
| 219 | Pitch-Derived Activated Carbon Fibers for Emission Control of Low-Concentration Hydrocarbon | 4.0 | 23 | Citations (PDF) |
| 220 | Three-dimensionally assembled manganese oxide ultrathin nanowires: Prospective electrode material for asymmetric supercapacitors | 8.9 | 48 | Citations (PDF) |
| 221 | Stabilizing CuPd bimetallic alloy nanoparticles deposited on holey carbon nitride for selective hydroxylation of benzene to phenol | 6.5 | 76 | Citations (PDF) |
| 222 | Effect of Surface Modification on Thermal Stability, Flexural Properties, and Impact Strength of Epoxy/Graphene Nanocomposites | 2.1 | 18 | Citations (PDF) |
| 223 | Effects of ozonized carbon black on fracture and post-cracking toughness of carbon fiber-reinforced epoxy composites | 12.8 | 45 | Citations (PDF) |
| 224 | Synthesis of polyethylenimine-impregnated titanate nanotubes for CO2 capture: Influence of porosity and nitrogen content on amine-modified adsorbents | 7.9 | 23 | Citations (PDF) |
| 225 | Environmental remediation by microporous carbon: An efficient contender for CO2 and methylene blue adsorption | 7.9 | 80 | Citations (PDF) |
| 226 | Fabrication of MoO3 Nanowire-based Membrane Devices for the Selective Adsorption of Cationic Dyes from Aqueous Solutions with High Performance and Reusability | 2.6 | 9 | Citations (PDF) |
| 227 | Recent Advances in TiO2 Films Prepared by Sol-Gel Methods for Photocatalytic Degradation of Organic Pollutants and Antibacterial Activities | 2.5 | 161 | Citations (PDF) |
| 228 | Graphitic Carbon Nitride Materials for Photocatalytic Hydrogen Production via Water Splitting: A Short Review | 3.7 | 73 | Citations (PDF) |
| 229 | A study on pore development mechanism of activated carbons from polymeric precursor: Effects of carbonization temperature and nano crystallite formation | 12.0 | 24 | Citations (PDF) |
| 230 | Recent Advances in Organic Thermoelectric Materials: Principle Mechanisms and Emerging Carbon-Based Green Energy Materials | 4.5 | 114 | Citations (PDF) |
| 231 | Preparation and characterization of mesophase formation of pyrolysis fuel oil-derived binder pitches for carbon composites | 12.8 | 31 | Citations (PDF) |
| 232 | Effect of Triblock Copolymer on Carbon-Based Boron Nitride Whiskers for Efficient CO2 Adsorption | 4.5 | 30 | Citations (PDF) |
| 233 | Effect of graphene oxide/carbon nanotube ratio on electrochemical behaviors of spongy bone-like reduced graphene oxide/carbon nanotube foam prepared by simple and green approach | 12.0 | 45 | Citations (PDF) |
| 234 | Flexible Organic Thermoelectric Materials and Devices for Wearable Green Energy Harvesting | 4.5 | 76 | Citations (PDF) |
| 235 | Effect of electroless nickel plating on electromagnetic interference shielding effectiveness of pitch-based carbon papers/epoxy composites | 2.7 | 6 | Citations (PDF) |
| 236 | A developed equation for electrical conductivity of polymer carbon nanotubes (CNT) nanocomposites based on Halpin-Tsai model | 4.0 | 72 | Citations (PDF) |
| 237 | Thermal and Mechanical Interfacial Behaviors of Graphene Oxide-Reinforced Epoxy Composites Cured by Thermal Latent Catalyst | 2.8 | 37 | Citations (PDF) |
| 238 | Carbon-Filled Organic Phase-Change Materials for Thermal Energy Storage: A Review | 4.2 | 82 | Citations (PDF) |
| 239 | Recent Trends of Foaming in Polymer Processing: A Review | 4.5 | 309 | Citations (PDF) |
| 240 | Recent Advances in Carbonaceous Photocatalysts with Enhanced Photocatalytic Performances: A Mini Review | 2.8 | 141 | Citations (PDF) |
| 241 | Effect of silver-plated expanded graphite addition on thermal and electrical conductivities of epoxy composites in the presence of graphite and copper | 8.1 | 47 | Citations (PDF) |
| 242 | Preparation and Characterization of Mesoporous TiO2 Sphere/g-C3N4 Nanosheets for Photocatalytic Behaviors | 0.6 | 10 | Citations (PDF) |
| 243 | Recent progresses of fabrication and characterization of fibers-reinforced composites: A review | 6.8 | 243 | Citations (PDF) |
| 244 | TiO2 NPs Assembled into a Carbon Nanofiber Composite Electrode by a One-Step Electrospinning Process for Supercapacitor Applications | 4.5 | 97 | Citations (PDF) |
| 245 | Functionalized Carbon Materials for Electronic Devices: A Review | 2.6 | 107 | Citations (PDF) |
| 246 | Mesopore-Rich Activated Carbons for Electrical Double-Layer Capacitors by Optimal Activation Condition | 4.0 | 41 | Citations (PDF) |
| 247 | Synthesis and electrochemical characterization of nanostructured Ni-Co-MOF/graphene oxide composites as capacitor electrodes | 5.3 | 209 | Citations (PDF) |
| 248 | Kinetic models of swelling and thermal stability of silver/poly(vinyl alcohol)/chitosan/graphene hydrogels | 5.8 | 31 | Citations (PDF) |
| 249 | Chemically modified activated carbon decorated with MnO2 nanocomposites for improving lithium adsorption and recovery from aqueous media | 6.0 | 76 | Citations (PDF) |
| 250 | The formation mechanism of Li4Ti5O12−y solid solutions prepared by carbothermal reduction and the effect of Ti3+ on electrochemical performance | 3.4 | 25 | Citations (PDF) |
| 251 | Preparation of Cu nanoparticles by a pulsed wire evaporation process for conductive ink applications | 1.9 | 5 | Citations (PDF) |
| 252 | Implication of thermally conductive nanodiamond-interspersed graphite nanoplatelet hybrids in thermoset composites with superior thermal management capability | 3.4 | 33 | Citations (PDF) |
| 253 | Influence of heat treatment temperature on structure and exothermic properties of electroless Ni P plating carbon fiber heating elements | 12.8 | 22 | Citations (PDF) |
| 254 | Stabilization of dispersed CuPd bimetallic alloy nanoparticles on ZIF-8 for photoreduction of Cr(VI) in aqueous solution | 12.0 | 164 | Citations (PDF) |
| 255 | Conventional and Microwave Hydrothermal Synthesis and Application of Functional Materials: A Review | 2.8 | 509 | Citations (PDF) |
| 256 | MoS2/CdS/TiO2 ternary composite incorporated into carbon nanofibers for the removal of organic pollutants from water | 4.8 | 36 | Citations (PDF) |
| 257 | Imidazolium-optimized conductive interfaces in multilayer graphene nanoplatelet/epoxy composites for thermal management applications and electroactive devices | 4.1 | 84 | Citations (PDF) |
| 258 | Effect of polydopamine-modified reduced graphene oxides on the catalytic activity of Pt nanoparticles catalysts for fuel cell electrodes | 4.9 | 14 | Citations (PDF) |
| 259 | Current Progress on the Surface Chemical Modification of Carbonaceous Materials | 2.5 | 156 | Citations (PDF) |
| 260 | Determination of the optimum porosity for 2-CEES adsorption by activated carbon fiber from various precursors | 4.9 | 24 | Citations (PDF) |
| 261 | Facile construction of MoO3@ZIF-8 core-shell nanorods for efficient photoreduction of aqueous Cr (VI) | 20.5 | 332 | Citations (PDF) |
| 262 | Defining contribution of micropore size to hydrogen physisorption behaviors: A new approach based on DFT pore volumes | 10.7 | 44 | Citations (PDF) |
| 263 | Tunable nitrogen-doped microporous carbons: Delineating the role of optimum pore size for enhanced CO2 adsorption | 12.0 | 159 | Citations (PDF) |
| 264 | Recent advanced thermal interfacial materials: A review of conducting mechanisms and parameters of carbon materials | 10.7 | 328 | Citations (PDF) |
| 265 | Improvement of thermal behaviors of biodegradable poly(lactic acid) polymer: A review | 12.8 | 226 | Citations (PDF) |
| 266 | Fly-ash-incorporated electrospun zinc oxide nanofibers: Potential material for environmental remediation | 7.7 | 76 | Citations (PDF) |
| 267 | Optimization of the pore structure of PAN-based carbon fibers for enhanced supercapacitor performances via electrospinning | 12.8 | 88 | Citations (PDF) |
| 268 | Comparison studies on pore development mechanisms of activated hard carbons from polymeric resins and their applications for electrode materials | 9.0 | 17 | Citations (PDF) |
| 269 | Preparation and characterization of carbon black/pitch-based carbon fiber paper composites for gas diffusion layers | 12.8 | 49 | Citations (PDF) |
| 270 | A modeling methodology to investigate the effect of interfacial adhesion on the yield strength of MMT reinforced nanocomposites | 5.8 | 83 | Citations (PDF) |
| 271 | Effects of Pore Structure on n-Butane Adsorption Characteristics of Polymer-Based Activated Carbon | 3.8 | 21 | Citations (PDF) |
| 272 | A model for the tensile modulus of polymer nanocomposites assuming carbon nanotube networks and interphase zones | 2.3 | 4 | Citations (PDF) |
| 273 | Enhancement of impact strength of poly(lactic acid)/silicon carbide nanocomposites through surface modification with titanate-coupling agents | 1.9 | 10 | Citations (PDF) |
| 274 | Facile preparation of activated carbon with optimal pore range for high butane working capacity | 4.9 | 13 | Citations (PDF) |
| 275 | Advanced Design and Synthesis of Composite Photocatalysts for the Remediation of Wastewater: A Review | 3.7 | 244 | Citations (PDF) |
| 276 | Effect of Mercapto-Terminated Silane Treatment on Rheological and Mechanical Properties of Rice Bran Carbon-Reinforced Nitrile Butadiene Rubber Composites | 2.8 | 10 | Citations (PDF) |
| 277 | Enhancing the heat and load transfer efficiency by optimizing the interface of hexagonal boron nitride/elastomer nanocomposites for thermal management applications | 4.1 | 152 | Citations (PDF) |
| 278 | Interlayer polymerization in amine-terminated macromolecular chain-grafted expanded graphite for fabricating highly thermal conductive and physically strong thermoset composites for thermal management applications | 8.1 | 123 | Citations (PDF) |
| 279 | A critical review of nanodiamond based nanocomposites: Synthesis, properties and applications | 12.8 | 265 | Citations (PDF) |
| 280 | Effect of Surface Modification on Impact Strength and Flexural Strength of Poly(lactic acid)/Silicon Carbide Nanocomposites | 2.8 | 36 | Citations (PDF) |
| 281 | MnO2 and biomass-derived 3D porous carbon composites electrodes for high performance supercapacitor applications | 6.0 | 167 | Citations (PDF) |
| 282 | Facile synthesis of petroleum-based activated carbons/tubular polypyrrole composites with enhanced electrochemical performance as supercapacitor electrode materials | 5.3 | 38 | Citations (PDF) |
| 283 | Highlighting the relative effects of surface characteristics and porosity on CO2 capture by adsorbents templated from melamine-based polyaminals | 3.2 | 40 | Citations (PDF) |
| 284 | Enhanced dispersion of boron nitride nanosheets in aqueous media by using bile acid-based surfactants | 2.0 | 17 | Citations (PDF) |
| 285 | Microporous carbons derived from melamine and isophthalaldehyde: One-pot condensation and activation in a molten salt medium for efficient gas adsorption | 3.4 | 45 | Citations (PDF) |
| 286 | Bimetallic AuPd alloy nanoparticles deposited on MoO3 nanowires for enhanced visible-light driven trichloroethylene degradation | 6.5 | 143 | Citations (PDF) |
| 287 | Carbon nanofibers wrapped with zinc oxide nano-flakes as promising electrode material for supercapacitors | 9.9 | 110 | Citations (PDF) |
| 288 | In‐situ modification of nanodiamonds by mercapto‐terminated silane agent for enhancing the mechanical interfacial properties of nitrile butadiene rubber nanocomposites | 4.9 | 31 | Citations (PDF) |
| 289 | A study on the effect of electron acceptor-donor interactions on the mechanical and interfacial properties of carbon black/natural rubber composites | 12.8 | 24 | Citations (PDF) |
| 290 | A study on optimal pore range for high pressure hydrogen storage behaviors by porous hard carbon materials prepared from a polymeric precursor | 9.0 | 31 | Citations (PDF) |
| 291 | Electrospun salicylic acid/polyurethane composite nanofibers for biomedical applications | 3.3 | 32 | Citations (PDF) |
| 292 | Recent advances in carbon-fiber-reinforced thermoplastic composites: A review | 12.8 | 870 | Citations (PDF) |
| 293 | Synthesis and characterization of nitrogen-doped TiO2 coatings on reduced graphene oxide for enhancing the visible light photocatalytic activity | 2.7 | 44 | Citations (PDF) |
| 294 | Photocatalytic Hydrogen Evolution via Water Splitting: A Short Review | 3.7 | 64 | Citations (PDF) |
| 295 | H2O2/steam activation as an eco-friendly and efficient top-down approach to enhancing porosity on carbonaceous materials: the effect of inevitable oxygen functionalities on CO2 capture | 9.1 | 55 | Citations (PDF) |
| 296 | Green preparation and characterization of graphene oxide/carbon nanotubes-loaded carboxymethyl cellulose nanocomposites | 3.4 | 85 | Citations (PDF) |
| 297 | Influence of Nickel Layer on Electromagnetic Interference Shielding Effectiveness of CuS‐Polyacrylonitrile Fibers | 2.1 | 12 | Citations (PDF) |
| 298 | Effect of silica removal and steam activation on extra-porous activated carbons from rice husks for methane storage | 9.0 | 39 | Citations (PDF) |
| 299 | Synthesis of Fe2O3/KOH-Activated Reduced Graphene Oxide Electrodes and Their Electrochemical Analysis | 0.6 | 3 | Citations (PDF) |
| 300 | Formation of hollow MoO3/SnS2 heterostructured nanotubes for efficient light-driven hydrogen peroxide production | 9.3 | 124 | Citations (PDF) |
| 301 | Influence of Oxyfluorination on Geometrical Pull-Out Behavior of Carbon-Fiber-Reinforced Epoxy Matrix Composites | 2.8 | 9 | Citations (PDF) |
| 302 | Influence of the nanoscaled hybrid based on nanodiamond@graphene oxide architecture on the rheological and thermo-physical performances of carboxylated-polymeric composites | 8.1 | 45 | Citations (PDF) |
| 303 | Fabrication and Characterization of the Graphene Composites Containing Embedded Manganese Dioxide Nanoparticles | 0.6 | 2 | Citations (PDF) |
| 304 | Effect of hydrophilic graphite flake on thermal conductivity and fracture toughness of basalt fibers/epoxy composites | 12.8 | 76 | Citations (PDF) |
| 305 | Comparative study of activation methods to design nitrogen-doped ultra-microporous carbons as efficient contenders for CO2 capture | 12.0 | 101 | Citations (PDF) |
| 306 | One-Pot Synthesis of Reduced Graphene Oxide/Anatase Titanium Dioxide Composites for Photocatalytic Degradation of Methylene Blue | 0.6 | 6 | Citations (PDF) |
| 307 | Thermal and curl properties of PET/PP blend fibres compatibilized with EAG ternary copolymer | 1.9 | 3 | Citations (PDF) |
| 308 | Facile hydrothermal synthesis of NiCo2O4- decorated filter carbon as electrodes for high performance asymmetric supercapacitors | 5.3 | 75 | Citations (PDF) |
| 309 | Large‐Scale Conductive Yarns Based on Twistable Korean Traditional Paper (Hanji) for Supercapacitor Applications: Toward High‐Performance Paper Supercapacitors | 22.5 | 51 | Citations (PDF) |
| 310 | In situ shear-induced mercapto group-activated graphite nanoplatelets for fabricating mechanically strong and thermally conductive elastomer composites for thermal management applications | 8.1 | 69 | Citations (PDF) |
| 311 | Influence of Ozone-Treated Silica Nanoparticles on Mechanical Interfacial Behavior and Thermal Stability of Silicone Composites | 0.6 | 4 | Citations (PDF) |
| 312 | Synthesis, characterization, and photocatalytic performances of electrospun cadmium titanate nanofibers immobilized into the reduced graphene oxide sheets | 2.5 | 11 | Citations (PDF) |
| 313 | A study of reduced graphene oxide/leaf-shaped TiO2 nanofibers for enhanced photocatalytic performance via electrospinning | 3.2 | 20 | Citations (PDF) |
| 314 | One-Pot Synthesis of Ag-TiO2/Nitrogen-Doped Graphene Oxide Nanocomposites and Its Photocatalytic Degradation of Methylene Blue | 0.6 | 12 | Citations (PDF) |
| 315 | Flexural Properties and Electrical Conductivity of Epoxy Resin/Carbon Fiber Cloth/Metallic Powder Composites | 2.8 | 7 | Citations (PDF) |
| 316 | Synthesis and characterization of reduced graphene oxide decorated with CeO2-doped MnO2 nanorods for supercapacitor applications | 9.9 | 158 | Citations (PDF) |
| 317 | Nanodiamond nanocluster-decorated graphene oxide/epoxy nanocomposites with enhanced mechanical behavior and thermal stability | 12.8 | 174 | Citations (PDF) |
| 318 | Modeling of tensile strength in polymer particulate nanocomposites based on material and interphase properties | 2.7 | 12 | Citations (PDF) |
| 319 | Maximizing volumetric energy density of all-graphene-oxide-supercapacitors and their potential applications for energy harvest | 7.9 | 36 | Citations (PDF) |
| 320 | Influence of surface energetics of graphene oxide on fracture toughness of epoxy nanocomposites | 12.8 | 109 | Citations (PDF) |
| 321 | Novel magnetically separable silver-iron oxide nanoparticles decorated graphitic carbon nitride nano-sheets: A multifunctional photocatalyst via one-step hydrothermal process | 9.9 | 62 | Citations (PDF) |
| 322 | Moderated surface defects of Ni particles encapsulated with NiO nanofibers as supercapacitor with high capacitance and energy density | 9.9 | 80 | Citations (PDF) |
| 323 | Inverse Gas Chromatography Study on London Dispersive Surface Free Energy and Electron Acceptor–Donor of Fluconazole Drug | 2.2 | 19 | Citations (PDF) |
| 324 | Thermal conductivity and thermo-physical properties of nanodiamond-attached exfoliated hexagonal boron nitride/epoxy nanocomposites for microelectronics | 8.1 | 194 | Citations (PDF) |
| 325 | Thermal and Electrical Conducting Property of Sodium Polymer Electrolyte Containing Barium Titanate Filler | 0.6 | 7 | Citations (PDF) |
| 326 | A facile ultrasonic-assisted fabrication of nitrogen-doped carbon dots/BiOBr up-conversion nanocomposites for visible light photocatalytic enhancements | 3.4 | 78 | Citations (PDF) |
| 327 | Effect of Halide Impregnation on Elemental Mercury Removal of Activated Carbons | 2.1 | 8 | Citations (PDF) |
| 328 | CdS-TiO 2 NPs decorated carbonized eggshell membrane for effective removal of organic pollutants: A novel strategy to use a waste material for environmental remediation | 6.0 | 60 | Citations (PDF) |
| 329 | Cure behaviors and mechanical properties of carbon fiber-reinforced nylon6/epoxy blended matrix composites | 12.8 | 113 | Citations (PDF) |
| 330 | Silver nanoparticles decorated Mn2O3 hybrid nanofibers via electrospinning: Towards the development of new bactericides with synergistic effect | 4.4 | 9 | Citations (PDF) |
| 331 | In vitro investigation of electrophoretically deposited bioactive hydroxyapatite/chitosan coatings reinforced by graphene | 5.8 | 55 | Citations (PDF) |
| 332 | Influence of nickel nanoparticles on hydrogen storage behaviors of MWCNTs | 6.6 | 75 | Citations (PDF) |
| 333 | Highly Efficient Visible Blue-Emitting Black Phosphorus Quantum Dot: Mussel-Inspired Surface Functionalization for Bioapplications | 4.2 | 45 | Citations (PDF) |
| 334 | Polyaniline Enriched Flexible Carbon Nanofibers with Core–Shell Structure for High‐Performance Wearable Supercapacitors | 4.0 | 46 | Citations (PDF) |
| 335 | Au–pd bimetallic alloy nanoparticle-decorated BiPO 4 nanorods for enhanced photocatalytic oxidation of trichloroethylene | 6.5 | 174 | Citations (PDF) |
| 336 | Predictions of micromechanics models for interfacial/interphase parameters in polymer/metal nanocomposites | 3.3 | 78 | Citations (PDF) |
| 337 | Synthesis and comparison of different spinel ferrites and their catalytic activity during chemical vapor deposition of polymorphic nanocarbons | 4.2 | 20 | Citations (PDF) |
| 338 | Enhanced interfacial interaction by grafting carboxylated‐macromolecular chains on nanodiamond surfaces for epoxy‐based thermosets | 2.6 | 44 | Citations (PDF) |
| 339 | Preparation and Characterization of Polyamides and Nitrogen‐doped Carbons for Enhanced CO2 Capture | 2.1 | 10 | Citations (PDF) |
| 340 | One-pot synthesis of Ag3PO4/MoS2 nanocomposite with highly efficient photocatalytic activity | 6.1 | 29 | Citations (PDF) |
| 341 | Facile synthesis of nitrogen-enriched microporous carbons derived from imine and benzimidazole-linked polymeric framework for efficient CO2 adsorption | 7.9 | 51 | Citations (PDF) |
| 342 | Influence of nitrogen moieties on CO2 capture by polyaminal-based porous carbon | 2.8 | 35 | Citations (PDF) |
| 343 | Investigating the effect of membrane layers on the cathode potential of air-cathode microbial fuel cells | 9.0 | 8 | Citations (PDF) |
| 344 | Facile Synthesis of MgO-Modified Carbon Adsorbents with Microwave- Assisted Methods: Effect of MgO Particles and Porosities on CO2 Capture | 3.4 | 78 | Citations (PDF) |
| 345 | Fracture toughness and ductile characteristics of diglycidyl ether of bisphenol-A resins modified with biodegradable epoxidized linseed oil | 12.8 | 37 | Citations (PDF) |
| 346 | Mechanical and optical properties of electrospun nylon-6,6 nanofiber reinforced cyclic butylene terephthalate composites | 5.8 | 36 | Citations (PDF) |
| 347 | Carbon quantum dots incorporated keratin/polyvinyl alcohol hydrogels: Preparation and photoluminescent assessment | 2.5 | 23 | Citations (PDF) |
| 348 | Fabrication and characterization of flower-like BiOI/Pt heterostructure with enhanced photocatalytic activity under visible light irradiation | 3.2 | 19 | Citations (PDF) |
| 349 | Ultrahigh electromagnetic interference shielding performance of lightweight, flexible, and highly conductive copper-clad carbon fiber nonwoven fabrics | 5.1 | 127 | Citations (PDF) |
| 350 | Incorporation of RuO2 into charcoal-derived carbon with controllable microporosity by CO2 activation for high-performance supercapacitor | 10.7 | 220 | Citations (PDF) |
| 351 | Effect of addition of 1-butyl-3-methylimidazolium thiocyanate on conductivity of Na-containing polymer electrolyte | 3.0 | 10 | Citations (PDF) |
| 352 | Effect of incorporation of multiwalled carbon nanotubes on photodegradation efficiency of mesoporous anatase TiO2 spheres | 4.4 | 21 | Citations (PDF) |
| 353 | Preparation and characterization of eggshell membrane/PVA hydrogel via electron beam irradiation technique | 5.8 | 38 | Citations (PDF) |
| 354 | Immobilization of Ag3PO4 nanoparticles on electrospun PAN nanofibers via surface oximation: Bifunctional composite membrane with enhanced photocatalytic and antimicrobial activities | 5.8 | 65 | Citations (PDF) |
| 355 | Synthesis of reduced graphene oxide/thorn-like titanium dioxide nanofiber aerogels with enhanced electrochemical performance for supercapacitor | 9.9 | 60 | Citations (PDF) |
| 356 | Effect of Graphene Oxide on Thermal, Optical, and Gas Permeability of Graphene Oxide/Poly(vinyl alcohol) Hybrid Films Using the Boric Acid | 0.6 | 3 | Citations (PDF) |
| 357 | A Study on Photocatalytic Behaviors of Activated Carbon Fibers Impregnated with N-Doped Titania | 0.6 | 3 | Citations (PDF) |
| 358 | Hydrogen Storage Behaviors of Porous Carbons Derived from Poly(vinylidene fluoride) | 0.6 | 9 | Citations (PDF) |
| 359 | Green synthesis of fluorescent carbon dots from carrot juice for in vitro cellular imaging | 4.9 | 99 | Citations (PDF) |
| 360 | Effect of Ionic Liquids on the Capacitance Behaviors of Activated Carbon Electrodes Against Organic Electrolytes | 0.6 | 4 | Citations (PDF) |
| 361 | Electrochemical behavior of pitch-based activated carbon fibers for electrochemical capacitors | 10.5 | 73 | Citations (PDF) |
| 362 | Optimization of Kinetic Pore Size for Methane Storage Behavior of Pitch‐based Activated Carbon Fibers | 2.1 | 5 | Citations (PDF) |
| 363 | Dyeing of electrospun nylon 6 nanofibers with reactive dyes using electron beam irradiation | 5.8 | 12 | Citations (PDF) |
| 364 | Synthesis of GNS/TiO<sub>2</sub> Electrodes Through Sol–Gel Method and Their Electrochemical Analysis for Capacitors | 0.6 | 2 | Citations (PDF) |
| 365 | Fracture toughness improvement of poly(lactic acid) with silicon carbide whiskers | 2.8 | 23 | Citations (PDF) |
| 366 | Electromagnetic interference shielding effectiveness of nickel-plated MWCNTs/high-density polyethylene composites | 12.8 | 117 | Citations (PDF) |
| 367 | Thermal, impact and toughness behaviors of expanded graphite/graphite oxide-filled epoxy composites | 12.8 | 75 | Citations (PDF) |
| 368 | In-situ synthesis of nanofibers with various ratios of BiOClx/BiOBry/BiOIz for effective trichloroethylene photocatalytic degradation | 6.6 | 112 | Citations (PDF) |
| 369 | Preparation of flower-like TiO2 sphere/reduced graphene oxide composites for photocatalytic degradation of organic pollutants | 3.2 | 55 | Citations (PDF) |
| 370 | Effect of Modification by Polydopamine and Polymeric Carbon Nitride on Methanol Oxidation Ability of Pt Catalysts-Supported on Reduced Graphene Oxide | 3.1 | 18 | Citations (PDF) |
| 371 | Effects of exfoliated graphite on the thermal properties of erythritol-based composites used as phase-change materials | 12.8 | 64 | Citations (PDF) |
| 372 | Biocompatible and photoluminescent keratin/poly(vinyl alcohol)/carbon quantum dot nanofiber: A novel multipurpose electrospun mat | 2.8 | 30 | Citations (PDF) |
| 373 | Ag-ZnO photocatalyst anchored on carbon nanofibers: Synthesis, characterization, and photocatalytic activities | 4.5 | 100 | Citations (PDF) |
| 374 | Influence of mesopore distribution on photocatalytic behaviors of anatase TiO 2 spherical nanostructures | 5.8 | 17 | Citations (PDF) |
| 375 | Electrochemical Performance of Pitch-Based Activated Carbon Fibers for Anode Electrode in Supercapacitors | 0.6 | 2 | Citations (PDF) |
| 376 | Effects of Microporosity and Surface Chemistry on Separation Performances of N-Containing Pitch-Based Activated Carbons for CO2/N2 Binary Mixture | 3.4 | 85 | Citations (PDF) |
| 377 | Physico-mechanical and fire properties of polyurethane/melamine-formaldehyde interpenetrating polymer network foams | 2.8 | 18 | Citations (PDF) |
| 378 | Environment friendly, transparent nanofiber textiles consolidated with high efficiency PLEDs for wearable electronics | 2.5 | 31 | Citations (PDF) |
| 379 | Improvement of CO2 capture by graphite oxide in presence of polyethylenimine | 9.0 | 82 | Citations (PDF) |
| 380 | Study on Ion-Conducting Properties of Ionic Liquid Containing Carbonate Electrolytes Against Carbon Electrode | 0.6 | 3 | Citations (PDF) |
| 381 | One-pot synthesis of CdS sensitized TiO2 decorated reduced graphene oxide nanosheets for the hydrolysis of ammonia-borane and the effective removal of organic pollutant from water | 5.4 | 52 | Citations (PDF) |
| 382 | Pitch coating of SiC and its effects on the thermal stability and oxidation resistance of SiC/epoxy composites | 12.8 | 18 | Citations (PDF) |
| 383 | Characterization of Pullulan/Chitosan Oligosaccharide/Montmorillonite Nanofibers Prepared by Electrospinning Technique | 0.6 | 8 | Citations (PDF) |
| 384 | In-situ synthesis of graphene oxide/BiOCl heterostructured nanofibers for visible-light photocatalytic investigation | 6.0 | 72 | Citations (PDF) |
| 385 | The effect of graphene loading on mechanical, thermal and biological properties of poly(vinyl alcohol)/graphene nanocomposites | 5.8 | 65 | Citations (PDF) |
| 386 | General one-pot strategy to prepare Ag–TiO2 decorated reduced graphene oxide nanocomposites for chemical and biological disinfectant | 6.0 | 114 | Citations (PDF) |
| 387 | Preparation and electrochemical analysis of graphene nanosheets/nickel hydroxide composite electrodes containing carbon nanotubes | 5.8 | 12 | Citations (PDF) |
| 388 | One-pot microwave-assisted synthesis of reduced graphene oxide/nickel cobalt double hydroxide composites and their electrochemical behavior | 5.8 | 53 | Citations (PDF) |
| 389 | A review: synthesis and applications of graphene/chitosan nanocomposites | 4.9 | 29 | Citations (PDF) |
| 390 | A review: methane capture by nanoporous carbon materials for automobiles | 4.9 | 54 | Citations (PDF) |
| 391 | Ion conducting properties of imidazolium salts with tri-alkyl chains in organic electrolytes against activated carbon electrodes | 4.9 | 4 | Citations (PDF) |
| 392 | Preparation and characterization of chemically activated carbon materials for CO2capture | 4.9 | 10 | Citations (PDF) |
| 393 | A review: role of interfacial adhesion between carbon blacks and elastomeric materials | 4.9 | 34 | Citations (PDF) |
| 394 | Investigation of carbon dioxide adsorption by nitrogen-doped carbons synthesized from cubic MCM-48 mesoporous silica | 4.9 | 8 | Citations (PDF) |
| 395 | KOH-activated graphite nanofibers as CO2adsorbents | 4.9 | 16 | Citations (PDF) |
| 396 | Effects of heat treatment time on aromatic yield of pyrolysis fuel oil-derived pitches | 4.9 | 7 | Citations (PDF) |
| 397 | Effects of maleic anhydride content on mechanical properties of carbon fibers-reinforced maleic anhydride-grafted-poly-propylene matrix composites | 4.9 | 47 | Citations (PDF) |
| 398 | High Strength Electrospun Nanofiber Mats via CNT Reinforcement: A Review | 0.1 | 12 | Citations (PDF) |
| 399 | Effect of Ball Milling and KOH Activation on Electrochemical Properties of Pitch‐based Carbon Fibers | 2.1 | 4 | Citations (PDF) |
| 400 | Rheological properties and fracture toughness of epoxy resin/multi‐walled carbon nanotube composites | 3.4 | 8 | Citations (PDF) |
| 401 | Facile Synthesis of Pre-Doping Lithium-Ion Into Nitrogen-Doped Graphite Negative Electrode for Lithium-Ion Capacitor | 0.6 | 3 | Citations (PDF) |
| 402 | Influence of orientation on ordered microstructure of PAN-based fibers during electron beam irradiation stabilization | 5.8 | 20 | Citations (PDF) |
| 403 | Enhanced Catalytic Activity of Pt Supported on Nitrogen-Doped Reduced Graphene Oxide Electrodes for Fuel Cells | 0.6 | 2 | Citations (PDF) |
| 404 | Characterization and antibacterial properties of aminophenol grafted and Ag NPs decorated graphene nanocomposites | 5.4 | 56 | Citations (PDF) |
| 405 | Preparation and characterization of multi-walled carbon nanotubes impregnated with polyethyleneimine for carbon dioxide capture | 9.0 | 87 | Citations (PDF) |
| 406 | Synthesis of a novel phosphorus-nitrogen-containing intumescent flame retardant and its application to fabrics | 5.8 | 60 | Citations (PDF) |
| 407 | Preparation and characterization of optically transparent and photoluminescent electrospun nanofiber composed of carbon quantum dots and polyacrylonitrile blend with polyacrylic acid | 4.1 | 47 | Citations (PDF) |
| 408 | Silica-coated multi-walled carbon nanotubes impregnated with polyethyleneimine for carbon dioxide capture under the flue gas condition | 3.2 | 43 | Citations (PDF) |
| 409 | Characteristics of flow and reactive pollutant dispersion in urban street canyons | 3.8 | 54 | Citations (PDF) |
| 410 | Post-annealing effects of electroless Ni–B-plated MWCNTs on thermal conductivity of epoxy-based composites | 5.8 | 6 | Citations (PDF) |
| 411 | Effect of chemical treatments on lithium recovery process of activated carbons | 5.8 | 23 | Citations (PDF) |
| 412 | Influence of electrolessly silver-plated multi-walled carbon nanotubes on thermal conductivity of epoxy matrix nanocomposites | 12.8 | 43 | Citations (PDF) |
| 413 | Effect of MoO3 on mechanical interfacial behavior and anti-oxidation of carbon fibers-reinforced composites | 5.8 | 8 | Citations (PDF) |
| 414 | Synthesis and characterization of photocatalytic and antibacterial PAN/Ag2CO3 composite nanofibers by ion exchange method | 2.0 | 16 | Citations (PDF) |
| 415 | Effect of TiO2 on photocatalytic activity of polyvinylpyrrolidone fabricated via electrospinning | 12.8 | 53 | Citations (PDF) |
| 416 | Study on the Effect of Silanization and Improvement in the Tensile Behavior of Graphene-Chitosan-Composite | 4.5 | 85 | Citations (PDF) |
| 417 | Preparation and characterization of sucrose-based microporous carbons for increasing hydrogen storage | 5.8 | 27 | Citations (PDF) |
| 418 | One-step synthesis of robust nitrogen-doped carbon dots: acid-evoked fluorescence enhancement and their application in Fe3+ detection | 9.3 | 215 | Citations (PDF) |
| 419 | Effect of manganese dioxide on supercapacitive behaviors of petroleum pitch-based carbons | 5.8 | 11 | Citations (PDF) |
| 420 | Electrospun composite nanofibers of polyacrylonitrile and Ag2CO3 nanoparticles for visible light photocatalysis and antibacterial applications | 3.4 | 35 | Citations (PDF) |
| 421 | Effect of urethane functionality and number of epoxide groups on cure and mechanical behaviors of epoxy resins | 2.8 | 6 | Citations (PDF) |
| 422 | Thermal and cure shrinkage behaviors of epoxy resins cured by thermal cationic catalysts | 2.8 | 8 | Citations (PDF) |
| 423 | PAN electrospun nanofibers reinforced with Ag2CO3 nanoparticles: Highly efficient visible light photocatalyst for photodegradation of organic contaminants in waste water | 2.8 | 23 | Citations (PDF) |
| 424 | Cure behaviors and thermal stabilities of tetrafunctional epoxy resin toughened by polyamideimide | 2.8 | 27 | Citations (PDF) |
| 425 | One-step coating of silica onto multi-walled carbon nanotubes using polyethyleneimine for high electrical resistivity | 2.8 | 4 | Citations (PDF) |
| 426 | Influence of electroless nickel-plating on fracture toughness of pitch-based carbon fibre reinforced composites | 12.8 | 32 | Citations (PDF) |
| 427 | Modification of surface functionality of multi-walled carbon nanotubes on fracture toughness of basalt fiber-reinforced composites | 12.8 | 59 | Citations (PDF) |
| 428 | Synthesis and application of epoxy resins: A review | 5.8 | 2,023 | Citations (PDF) |
| 429 | Synergistic reinforcing of poly(lactic acid)-based systems by polybutylene succinate and nano-calcium carbonate | 5.8 | 36 | Citations (PDF) |
| 430 | Preparation and Characterizations of Rosin Based Thin Films and Fibers | 0.6 | 5 | Citations (PDF) |
| 431 | Electrical Properties of Conductive Nylon66/Graphene Oxide Composite Nanofibers | 0.6 | 5 | Citations (PDF) |
| 432 | A study on mechanical properties and microstructure of tetragonal zirconia-based composites | 5.8 | 3 | Citations (PDF) |
| 433 | Preparation of polyethylene oxide composite electrolytes containing imidazolium cation salt-attached titanium oxides and their conducing behavior | 5.8 | 21 | Citations (PDF) |
| 434 | Influence of reduced graphene oxide on mechanical behaviors of sodium carboxymethyl cellulose | 12.8 | 70 | Citations (PDF) |
| 435 | A role of steam activation on CO2 capture and separation of narrow microporous carbons produced from cellulose fibers | 8.9 | 92 | Citations (PDF) |
| 436 | Influence of chemical surface treatment of basalt fibers on interlaminar shear strength and fracture toughness of epoxy-based composites | 5.8 | 90 | Citations (PDF) |
| 437 | Role of microporosity of carbon produced from rice husks on electrochemical performance of Pt−Ru catalyst for direct methanol fuel cells | 5.8 | 9 | Citations (PDF) |
| 438 | Synthesis of activated carbon derived from rice husks for improving hydrogen storage capacity | 5.8 | 115 | Citations (PDF) |
| 439 | Facile, soot free approach toward synthesis of carbon nanoropes via chemical vapor deposition of acetylene in the presence of MnFe2O4 coated on stainless steel | 6.6 | 17 | Citations (PDF) |
| 440 | Electrospun polymeric nanofibers encapsulated with nanostructured materials and their applications: A review | 5.8 | 75 | Citations (PDF) |
| 441 | Preparation and electrocatalytic oxidation performance of Pt/MnO2–graphene oxide nanocomposites | 5.8 | 18 | Citations (PDF) |
| 442 | Synthesis and thermal properties of urethane-containing epoxy resin | 5.8 | 17 | Citations (PDF) |
| 443 | A short review on basalt fiber reinforced polymer composites | 12.8 | 1,006 | Citations (PDF) |
| 444 | Water-mediated modulation of TiO2 decorated with graphene for photocatalytic degradation of trichloroethylene | 2.7 | 16 | Citations (PDF) |
| 445 | Thermal property and latent heat energy storage behavior of sodium acetate trihydrate composites containing expanded graphite and carboxymethyl cellulose for phase change materials | 6.5 | 121 | Citations (PDF) |
| 446 | Improvement of hydrophilic properties of electrospun polyamide-imide fibrous mats by atmospheric-pressure plasma treatment | 4.7 | 12 | Citations (PDF) |
| 447 | Electrospun ZnO hybrid nanofibers for photodegradation of wastewater containing organic dyes: A review | 5.8 | 153 | Citations (PDF) |
| 448 | A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites | 5.8 | 1,317 | Citations (PDF) |
| 449 | Electromagnetic interference shielding effectiveness of high-density polyethylene composites reinforced with multi-walled carbon nanotubes | 5.8 | 57 | Citations (PDF) |
| 450 | Fabrication of PdS/ZnS NPs doped PVAc hybrid electrospun nanofibers: Effective and reusable catalyst for dye photodegradation | 5.8 | 26 | Citations (PDF) |
| 451 | Effects of pore structures on electrochemical behaviors of polyacrylonitrile (PAN)-based activated carbon nanofibers | 5.8 | 65 | Citations (PDF) |
| 452 | A review on solid adsorbents for carbon dioxide capture | 5.8 | 673 | Citations (PDF) |
| 453 | Fracture toughness and surface morphology of polysulfone-modified epoxy resin | 5.8 | 67 | Citations (PDF) |
| 454 | Preparation and photocatalytic activity of fly ash incorporated TiO2 nanofibers for effective removal of organic pollutants | 5.4 | 78 | Citations (PDF) |
| 455 | Fracture toughness and surface morphology of Al2O3/Pt composites | 5.8 | 3 | Citations (PDF) |
| 456 | Preparation and Characteristic of Carbon/Carbon Composites with Coal-tar and Petroleum Binder Pitches | 0.3 | 6 | Citations (PDF) |
| 457 | An overview of new oxidation methods for polyacrylonitrile-based carbon fibers | 4.9 | 52 | Citations (PDF) |
| 458 | Influence of Nitrogen moieties on CO2capture of Carbon Aerogel | 4.9 | 32 | Citations (PDF) |
| 459 | Preparation and characterization of carbon fiber-reinforced thermosetting composites: a review | 4.9 | 69 | Citations (PDF) |
| 460 | The effects of stacking sequence on the penetration-resistant behaviors of T800 carbon fiber composite plates under low-velocity impact loading | 4.9 | 29 | Citations (PDF) |
| 461 | Hydrogen storage capacity of highly porous carbons synthesized from biomass-derived aerogels | 4.9 | 33 | Citations (PDF) |
| 462 | Influence of oxidative atmosphere of the electron beam irradiation on cyclization of PAN-based fibers | 4.9 | 10 | Citations (PDF) |
| 463 | Effect of nickel on hydrogen storage behaviors of carbon aerogel hybrid | 4.9 | 9 | Citations (PDF) |
| 464 | Influence of MWCNTs on Fracture Toughness of MWCNTs/Nickel-Pitch Fiber/Epoxy Composites | 0.1 | 4 | Citations (PDF) |
| 465 | Influence of Fiber Array Direction on Mechanical Interfacial Properties of Basalt Fiber-reinforced Composites | 0.9 | 5 | Citations (PDF) |
| 466 | Preparation and Characterization of Coal Tar Pitch-based Activated Carbon Fibers. II. Cu(II) and Ni(II) Adsorption in Activated Carbon Fibers during Physical Activation | 0.2 | 0 | Citations (PDF) |
| 467 | Electrochemical Properties of Size-Controllable Polypyrrole/Porous Carbon for Supercapacitor Electrodes | 0.6 | 6 | Citations (PDF) |
| 468 | Study on Improved Electrochemical Properties of Graphene Nanosheet/Nickel Oxide Composite as Electrode Materials | 0.6 | 0 | Citations (PDF) |
| 469 | Roles of Metal/Activated Carbon Hybridization on Elemental Mercury Adsorption | 0.6 | 3 | Citations (PDF) |
| 470 | Activated carbon nanotubes/polyaniline composites as supercapacitor electrodes | 8.9 | 92 | Citations (PDF) |
| 471 | Therapeutic Effect of Irradiation of Magnetic Infrared Laser on Osteoarthritis Rat Model | 2.7 | 14 | Citations (PDF) |
| 472 | Carbon dioxide adsorption performance of ultramicroporous carbon derived from poly(vinylidene fluoride) | 5.8 | 28 | Citations (PDF) |
| 473 | EMI shielding behaviors of Ni-coated MWCNTs-filled epoxy matrix nanocomposites | 5.7 | 71 | Citations (PDF) |
| 474 | Effect of hydrothermal temperature on photocatalytic properties of TiO2 nanotubes | 2.7 | 39 | Citations (PDF) |
| 475 | Combined effect of corona discharge and enzymatic treatment on the mechanical and surface properties of wool | 5.8 | 21 | Citations (PDF) |
| 476 | Facile preparation and characterization of poly(vinyl alcohol)/chitosan/graphene oxide biocomposite nanofibers | 5.8 | 135 | Citations (PDF) |
| 477 | A study on thermal conductivity of electroless Ni–B plated multi-walled carbon nanotubes-reinforced composites | 5.8 | 30 | Citations (PDF) |
| 478 | Antimicrobial activity of electrospun polyurethane nanofibers containing composite materials | 2.9 | 10 | Citations (PDF) |
| 479 | Eco-friendly one-pot synthesis of gold decorated reduced graphene oxide using beer as a reducing agent | 5.8 | 24 | Citations (PDF) |
| 480 | Isothermal exfoliation of graphene oxide by a new carbon dioxide pressure swing method | 10.7 | 50 | Citations (PDF) |
| 481 | The facile and low temperature synthesis of nanophase hydroxyapatite crystals using wet chemistry | 5.8 | 67 | Citations (PDF) |
| 482 | Electrospun Ag-CoF doped PU nanofibers: Effective visible light catalyst for photodegradation of organic dyes | 2.8 | 8 | Citations (PDF) |
| 483 | Li ion adsorption behaviors of Ni-loaded Li–Mn oxide composites | 4.4 | 18 | Citations (PDF) |
| 484 | Preparation and characterization of chitosan-based nanofibers by ecofriendly electrospinning | 2.5 | 37 | Citations (PDF) |
| 485 | Preparation and Electrochemistry of Platinum Nanoparticles Deposited on Ionic-Liquid-Decorated Reduced Graphene Oxide with an Enhanced Methanol Catalytic Activity | 3.1 | 14 | Citations (PDF) |
| 486 | Enhanced effect of dopant on polyaniline nanofiber based electrorheological response | 4.4 | 17 | Citations (PDF) |
| 487 | Recent Progress on the Fabrication of Ultrafine Polyamide-6 Based Nanofibers Via Electrospinning: A Topical Review | 30.1 | 45 | Citations (PDF) |
| 488 | Effect of p-type multi-walled carbon nanotubes for improving hydrogen storage behaviors | 3.2 | 20 | Citations (PDF) |
| 489 | Silver-coated graphene electrode produced by electrolytic deposition for electrochemical behaviors | 2.7 | 10 | Citations (PDF) |
| 490 | Study on optical interference effect of graphene oxide films on SiO2 and Si3N4 dielectric films | 3.0 | 3 | Citations (PDF) |
| 491 | Production of Pt nanoparticles-supported chelating group-modified graphene for direct methanol fuel cells | 3.0 | 11 | Citations (PDF) |
| 492 | Influence of KMnO4 oxidation on the electrochemical performance of pitch-based activated carbons | 3.0 | 3 | Citations (PDF) |
| 493 | Synthesis, characterization, and KOH activation of nanoporous carbon for increasing CO2 adsorption capacity | 3.0 | 8 | Citations (PDF) |
| 494 | Preparation and gas-sensing properties of pitch-based carbon fiber prepared using a melt-electrospinning method | 3.0 | 17 | Citations (PDF) |
| 495 | Enhanced electrical properties of electrospun nylon66 nanofibers containing carbon nanotube fillers and Ag nanoparticles | 2.0 | 10 | Citations (PDF) |
| 496 | Influence of H2O2 treatment on electrochemical activity of mesoporous carbon-supported Pt–Ru catalysts | 8.9 | 12 | Citations (PDF) |
| 497 | Preparation and characterization of polyacrylonitrile-based carbon fiber papers | 5.8 | 26 | Citations (PDF) |
| 498 | Enhancement of superhydrophobicity and conductivity of carbon nanofibers-coated glass fabrics | 5.8 | 11 | Citations (PDF) |
| 499 | Preparation and characterization of polyacrylonitrile-based carbon fibers produced by electron beam irradiation pretreatment | 5.8 | 69 | Citations (PDF) |
| 500 | Preparation and characterization of pitch-based nanoporous carbons for improving CO2 capture | 3.2 | 21 | Citations (PDF) |
| 501 | Antimicrobial characteristics of N-halaminated chitosan salt/cotton knit composites | 5.8 | 18 | Citations (PDF) |
| 502 | One-pot synthetic method to prepare highly N-doped nanoporous carbons for CO2 adsorption | 4.4 | 41 | Citations (PDF) |
| 503 | Electromagnetic interference shielding behaviors of carbon fibers-reinforced polypropylene matrix composites: II. Effects of filler length control | 5.8 | 67 | Citations (PDF) |
| 504 | Facile synthesis of nitrogen-enriched mesoporous carbon for carbon dioxide capture | 9.0 | 13 | Citations (PDF) |
| 505 | Facile stabilization process of polyacrylonitrile-based electrospun nanofibers by spraying 1% hydrogen peroxide and electron beam irradiation | 2.5 | 13 | Citations (PDF) |
| 506 | Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity | 10.7 | 118 | Citations (PDF) |
| 507 | Fracture toughness improvement of epoxy resins with short carbon fibers | 5.8 | 87 | Citations (PDF) |
| 508 | Preparation and characterization of PEI-loaded MCM-41 for CO2 capture | 9.0 | 84 | Citations (PDF) |
| 509 | Effect of ZnCl2 activation on CO2 adsorption of N-doped nanoporous carbons from polypyrrole | 3.2 | 55 | Citations (PDF) |
| 510 | Synthesis and characterization of electrospun cadmium sulfide- and lead sulfide-blended poly(vinyl acetate) composite nanofibers | 4.5 | 5 | Citations (PDF) |
| 511 | Roles of nitric acid treatment on PtRu catalyst supported on graphite nanofibers and their methanol electro-oxidation behaviors | 9.0 | 10 | Citations (PDF) |
| 512 | Influence of electron-beam irradiation on thermal stabilization process of polyacrylonitrile fibers | 5.8 | 22 | Citations (PDF) |
| 513 | Effects of Oxyfluorination on Surface and Mechanical Properties of Carbon Fiber-Reinforced Polarized-Polypropylene Matrix Composites | 0.6 | 6 | Citations (PDF) |
| 514 | Facile fabrication of Poly(vinyl alcohol)/Silica composites for removal of Hg(II) from water | 2.8 | 12 | Citations (PDF) |
| 515 | Role of electron beam irradiation on superabsorbent behaviors of carboxymethyl cellulose | 3.0 | 7 | Citations (PDF) |
| 516 | Effect of Activation Temperature on CO2Capture Behaviors of Resorcinol-based Carbon Aerogels | 2.1 | 20 | Citations (PDF) |
| 517 | Synthesis of Silver-doped Silica-complex Nanoparticles for Antibacterial Materials | 2.1 | 14 | Citations (PDF) |
| 518 | Electrochemical Behavior of Pt-Ru Catalysts on Zeolite-templated Carbon Supports for Direct Methanol Fuel Cells | 2.1 | 3 | Citations (PDF) |
| 519 | Synthesis of Polyacrylonitrile as Precursor for High-Performance Ultrafine Fibrids | 2.1 | 7 | Citations (PDF) |
| 520 | Preparation and Characterization of Polypropylene Non-woven Fabrics Prepared by Melt-blown Spinning for Filtration Membranes | 2.1 | 17 | Citations (PDF) |
| 521 | Effect of chemically reduced graphene oxide on epoxy nanocomposites for flexural behaviors | 4.9 | 28 | Citations (PDF) |
| 522 | Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications | 4.9 | 102 | Citations (PDF) |
| 523 | Facile preparation of self-assembled wool-based graphene hydrogels by electron beam irradiation | 4.9 | 12 | Citations (PDF) |
| 524 | Effect of microporosity on nitrogen-doped microporous carbons for electrode of supercapacitor | 4.9 | 16 | Citations (PDF) |
| 525 | Overlook of carbonaceous adsorbents and processing methods for elemental mercury removal | 4.9 | 5 | Citations (PDF) |
| 526 | Preparation and Characterization of Coaltar Pitch-based Activated Carbon Fibers(I) -Effect of Steam Activation Temperature on Textural Properties of Activated Carbon Fibers- | 0.2 | 2 | Citations (PDF) |
| 527 | A study on elemental mercury adsorption behaviors of nanoporous carbons with carbon dioxide activation | 4.9 | 2 | Citations (PDF) |
| 528 | A Study on the Peel Strength of Silane-treated Silicas-filled Epoxy Adhesives | 0.3 | 0 | Citations (PDF) |
| 529 | Effect of Silane Coupling Agent on Thermal Stability and Adhesion Properties of DGEBF Epoxy Resin | 0.9 | 2 | Citations (PDF) |
| 530 | Recent Progress on the Fabrication of Ultrafine Polyamide-6 Based Nanofibers Via Electrospinning: A Topical Review | 30.1 | 2 | Citations (PDF) |
| 531 | Synthesis and characterization of a novel silicon-containing epoxy resin | 2.8 | 25 | Citations (PDF) |
| 532 | Preparation and characterization of chlorinated cross-linked chitosan/cotton knit for biomedical applications | 2.8 | 25 | Citations (PDF) |
| 533 | Synthesis of poly(glycolide-caprolactone) copolymers for application as bioabsorbable suture materials | 2.8 | 7 | Citations (PDF) |
| 534 | TiO2 photocatalyst for water treatment applications | 5.8 | 941 | Citations (PDF) |
| 535 | Influence of carbon shell structure on electrochemical performance of multi-walled carbon nanotube electrodes | 5.7 | 7 | Citations (PDF) |
| 536 | Relation of micropores/mesopore ratio on high electrochemical performance of nano-porous carbons | 7.9 | 16 | Citations (PDF) |
| 537 | Preparation and characterization of keratin-based biocomposite hydrogels prepared by electron beam irradiation | 5.8 | 67 | Citations (PDF) |
| 538 | Ordered nanoporous carbon for increasing CO2 capture | 3.2 | 43 | Citations (PDF) |
| 539 | Effects of CO2 activation on electrochemical performance of microporous carbons derived from poly(vinylidene fluoride) | 3.2 | 28 | Citations (PDF) |
| 540 | Influence of KOH-activated graphite nanofibers on the electrochemical behavior of Pt–Ru nanoparticle catalysts for fuel cells | 3.2 | 13 | Citations (PDF) |
| 541 | Effect of carbonization temperature on electrical conductivity of carbon papers prepared from petroleum pitch-coated glass fibers | 5.8 | 27 | Citations (PDF) |
| 542 | Facile fabrication of Pickering emulsion polymerized polystyrene/laponite composite nanoparticles and their electrorheology | 9.9 | 48 | Citations (PDF) |
| 543 | Influence of carbon nanofibers on electrochemical properties of carbon nanofibers/glass fibers composites | 2.7 | 11 | Citations (PDF) |
| 544 | Effect of surface modification of mesoporous carbon supports on the electrochemical activity of fuel cells | 9.9 | 13 | Citations (PDF) |
| 545 | Effect of nano-sized barium titanate addition on PEO/PVDF blend-based composite polymer electrolytes | 3.1 | 83 | Citations (PDF) |
| 546 | Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers | 9.9 | 226 | Citations (PDF) |
| 547 | Effects of structure of heat-treated pitch precursors on electrochemical properties of pitch-based activated carbons | 4.4 | 13 | Citations (PDF) |
| 548 | Preparation and electrochemical behaviors of styrene–acrylonitrile-based porous carbon electrodes | 5.3 | 7 | Citations (PDF) |
| 549 | Hydrogen Storage Behaviors of Ni-Doped Graphene Oxide/MIL-101 Hybrid Composites | 0.6 | 25 | Citations (PDF) |
| 550 | Recent Advances in Carbon-Nanotube-Based Epoxy Composites | 4.9 | 57 | Citations (PDF) |
| 551 | Effect of structural change of pitch on the thermal conductivity of epoxy‐based composites filled with heat‐treated pitch | 3.3 | 1 | Citations (PDF) |
| 552 | Electrochemical Characterization of a Carbon Nanofiber Electrode System Hybridized with PEDOT-PSS | 0.6 | 3 | Citations (PDF) |
| 553 | Effect of Nano-Silica Spheres Template on CO<SUB>2</SUB> Capture of Exchange Resin-Based Nanoporous Carbons | 0.6 | 6 | Citations (PDF) |
| 554 | Reduction Procedure Effect on the Electrochemical Properties of Conductive Carbon Black Supported Pt–Pd Electrocatalysts | 0.6 | 0 | Citations (PDF) |
| 555 | Preparation of polymeric modifier-attached graphene-supported bimetallic Pt–Pd nanocomposites, and their electrochemical properties as electro-catalysts | 3.0 | 1 | Citations (PDF) |
| 556 | Bactericidal efficacy of electrospun rosin/poly( ɛ-caprolactone) nanofibers | 2.8 | 5 | Citations (PDF) |
| 557 | Preparation and Characterization of PAN-based Superfined Carbon Fibers for Carbon-paper Applications | 2.1 | 14 | Citations (PDF) |
| 558 | Electrochemical Performance of Activated Carbons/Mn3O4-Carbon Blacks for Supercapacitor Electrodes | 2.1 | 11 | Citations (PDF) |
| 559 | Influence of Acetylation on the Antimicrobial Properties of Chitosan Non-Woven Fabrics | 2.1 | 3 | Citations (PDF) |
| 560 | Capacitance behaviors of Polyaniline/Graphene Nanosheet Composites Prepared by Aniline Chemical Polymerization | 4.9 | 31 | Citations (PDF) |
| 561 | Polymer matrices for carbon fiber-reinforced polymer composites | 4.9 | 72 | Citations (PDF) |
| 562 | Methanol oxidation behaviors of PtRu nanoparticles deposited onto binary carbon supports for direct methanol fuel cells | 4.9 | 3 | Citations (PDF) |
| 563 | A novel drying process for oil adsorption of expanded graphite | 4.9 | 9 | Citations (PDF) |
| 564 | Fiber surface and electrical conductivity of electroless Ni-plated PET ultra-fine fibers | 4.9 | 6 | Citations (PDF) |
| 565 | A Study on Thermal Conductivity and Fracture Toughness of Alumina Nanofibers and Powders-filled Epoxy Matrix Composites | 0.9 | 6 | Citations (PDF) |
| 566 | Effect of Anodic Oxidation of H<sub>2</sub>SO<sub>4</sub>/HNO<sub>3</sub>Ratio for Improving Interfacial Adhesion between Carbon Fibers and Epoxy Matrix Resins | 0.9 | 6 | Citations (PDF) |
| 567 | Influence of Electroless Ni-plated MWCNTs on Thermal Conductivity and Fracture Toughness of MWCNTs/Al<sub>2</sub>O<sub>3</sub>/Epoxy Composites | 0.9 | 5 | Citations (PDF) |
| 568 | Electrochemical characterization of activated carbon-sulfur composite electrode in organic electrolyte solution | 4.9 | 2 | Citations (PDF) |
| 569 | New Engineering Techniques for Carbon Master Batch | 0.2 | 0 | Citations (PDF) |
| 570 | Carbonization of Pitch-coated Glass Fibers on Thermal Conductivity of Epoxy Composites | 0.1 | 0 | Citations (PDF) |
| 571 | Preparation and capacitance behaviors of cobalt oxide/graphene composites | 4.9 | 37 | Citations (PDF) |
| 572 | Electrochemical Properties of Composite Electrolytes Based on Poly(ethylene oxide)/Poly(ethylene imine) Containing the Inorganic Silica Fillers | 0.6 | 4 | Citations (PDF) |
| 573 | Rheological and Mechanical Properties of Polypropylene Prepared with Multi-Walled Carbon Nanotube Masterbatch | 0.6 | 3 | Citations (PDF) |
| 574 | Effects of Mechanical Ball Milling with Active Gases on Hydrogen Adsorption Behaviors of Graphite Flakes | 0.6 | 5 | Citations (PDF) |
| 575 | High electrochemical performance of carbon black-bonded carbon nanotubes for electrode materials | 5.3 | 6 | Citations (PDF) |
| 576 | Thermal properties of epoxy resin/filler hybrid composites | 7.1 | 173 | Citations (PDF) |
| 577 | Effect of polystyrene-grafted multi-walled carbon nanotubes on the viscoelastic behavior and electrical properties of polypropylene-based nanocomposites | 3.0 | 3 | Citations (PDF) |
| 578 | Influence of Fluorination of Silica Surfaces on Interfacial Mechanical Properties of Acrylonitrile-Butadiene Rubber-Based Composites | 3.3 | 3 | Citations (PDF) |
| 579 | Electrochemical properties of polyaniline composite electrodes prepared by in-situ polymerization in titanium dioxide dispersed aqueous solution | 4.5 | 37 | Citations (PDF) |
| 580 | Influence of the pore size in multi-walled carbon nanotubes on the hydrogen storage behaviors | 3.2 | 71 | Citations (PDF) |
| 581 | Synthesis of activated carbon nanotube/copper oxide composites and their electrochemical performance | 6.0 | 148 | Citations (PDF) |
| 582 | Synthesis of zeolite-casted microporous carbons and their hydrogen storage capacity | 9.9 | 38 | Citations (PDF) |
| 583 | Synthesis and electrochemical performance of well-balanced mesopore/micropore contained carbons by activation-free method | 3.9 | 11 | Citations (PDF) |
| 584 | Synthesis of microporous carbon nanotubes by templating method and their high electrochemical performance | 5.3 | 15 | Citations (PDF) |
| 585 | A study of ion charge transfer on electrochemical behaviors of poly(vinylidene fluoride)-derived carbon electrodes | 5.8 | 6 | Citations (PDF) |
| 586 | Effect of exfoliation temperature on carbon dioxide capture of graphene nanoplates | 9.9 | 70 | Citations (PDF) |
| 587 | Morphology control and high electrochemical performance of flower-like N-enriched porous carbons for supercapacitor | 3.8 | 8 | Citations (PDF) |
| 588 | Influence of nickel oxide on carbon dioxide adsorption behaviors of activated carbons | 7.4 | 92 | Citations (PDF) |
| 589 | Bridge effect of silver nanoparticles on electrochemical performance of graphite nanofiber/polyaniline for supercapacitor | 4.5 | 38 | Citations (PDF) |
| 590 | Effect of coupling agents on thermal, flow, and adhesion properties of epoxy/silica compounds for capillary underfill applications | 4.4 | 39 | Citations (PDF) |
| 591 | Effect of fluorine–oxygen mixed gas treated graphite fibers on electrochemical behaviors of platinum–ruthenium nanoparticles toward methanol oxidation | 1.6 | 6 | Citations (PDF) |
| 592 | Synthesis of ditrimethylolpropane acrylate with low functionality for UV-curable coatings | 5.8 | 16 | Citations (PDF) |
| 593 | A study on copyrolysis and heating value of wood chip composites as cogeneration plant fuel | 5.8 | 6 | Citations (PDF) |
| 594 | Influence of carboxyl group formation on ammonia adsorption of NiO-templated nanoporous carbon surfaces | 4.4 | 6 | Citations (PDF) |
| 595 | MgO-templated porous carbons-based CO2 adsorbents produced by KOH activation | 4.4 | 43 | Citations (PDF) |
| 596 | Easy synthesis of polyaniline-based mesoporous carbons and their high electrochemical performance | 4.6 | 38 | Citations (PDF) |
| 597 | Elemental mercury vapor adsorption of copper-coated porous carbonaceous materials | 4.6 | 14 | Citations (PDF) |
| 598 | Formation and properties of polyester/copolyester conjugate fibers prepared by ultra‐high‐speed melt spinning technique | 3.4 | 3 | Citations (PDF) |
| 599 | Rheological and thermal properties of epoxy nanocomposites reinforced with alkylated multi‐walled carbon nanotubes | 3.3 | 3 | Citations (PDF) |
| 600 | Influence of oxygen‐functional groups on carbon replicas for hydrogen adsorption | 1.5 | 19 | Citations (PDF) |
| 601 | Precursor Solvent Influence on Preparation and Electrochemical Properties of Platinum Nanoparticles Electrodes | 0.6 | 3 | Citations (PDF) |
| 602 | Preparation and characterization of nickel-coated carbon nanofibers produced from the electropsinning of polyamideimide precursor | 2.8 | 13 | Citations (PDF) |
| 603 | Anti-Helicobacter Pylori effect of fermented ginseng extracts with Lactobacillus plantarum MG 208 | 1.0 | 4 | Citations (PDF) |
| 604 | Synthesis and high electrochemical performance of polyaniline/MnO2-coated multi-walled carbon nanotube-based hybrid electrodes | 2.3 | 38 | Citations (PDF) |
| 605 | A study on high electrochemical capacitance of ion exchange resin-based activated carbons for supercapacitor | 2.7 | 24 | Citations (PDF) |
| 606 | Preparation and characteristic of platinum catalyst deposited on boron-doped carbon nanotubes | 2.7 | 8 | Citations (PDF) |
| 607 | Surface physical and chemical properties of atmospheric pressure plasma-treated polyamideimide fibrous mats using attenuated total reflection Fourier transform infrared imaging | 12.1 | 6 | Citations (PDF) |
| 608 | Influence of 1-D silica nanotubes as drug adsorbent on release behaviors of tulobuterol-loaded porous microcapsules | 5.3 | 9 | Citations (PDF) |
| 609 | Influence of MgO template on carbon dioxide adsorption of cation exchange resin-based nanoporous carbon | 9.9 | 44 | Citations (PDF) |
| 610 | Interactive effects of pore size control and carbonization temperatures on supercapacitive behaviors of porous carbon/carbon nanotube composites | 9.9 | 12 | Citations (PDF) |
| 611 | Electrochemical performance of graphene/carbon electrode contained well-balanced micro- and mesopores by activation-free method | 5.3 | 28 | Citations (PDF) |
| 612 | Effect of growth of graphite nanofibers on superhydrophobic and electrochemical properties of carbon fibers | 4.4 | 19 | Citations (PDF) |
| 613 | Influence of pH condition on colloidal suspension of exfoliated graphene oxide by electrostatic repulsion | 3.2 | 8 | Citations (PDF) |
| 614 | Influence of N-doped TiO2 on lithium ion conductivity of porous polymeric electrolyte membrane containing LiClO4 | 3.1 | 12 | Citations (PDF) |
| 615 | Synthesis and high electrochemical capacitance of N-doped microporous carbon/carbon nanotubes for supercapacitor | 3.8 | 85 | Citations (PDF) |
| 616 | Synthesis and three dimensional pattern finishing properties of blocked isocyanate prepolymers | 5.8 | 6 | Citations (PDF) |
| 617 | Thermo-mechanical behaviors of epoxy resins reinforced with nano-Al2O3 particles | 5.8 | 119 | Citations (PDF) |
| 618 | Ion conducting properties of poly(ethylene oxide)-based electrolytes incorporating amorphous silica attached with imidazolium salts | 3.0 | 3 | Citations (PDF) |
| 619 | Preparation and Characterization of Reduced Graphene Nanosheets via Pre-exfoliation of Graphite Flakes | 2.1 | 66 | Citations (PDF) |
| 620 | Effects of Surface Nitrification on Thermal Conductivity of Modified Aluminum Oxide Nanofibers-Reinforced Epoxy Matrix Nanocomposites | 2.1 | 4 | Citations (PDF) |
| 621 | Investigation of Narrow Pore Size Distribution on Carbon Dioxide Capture of Nanoporous Carbons | 2.1 | 12 | Citations (PDF) |
| 622 | In-vitro and in-vivo Behaviors of Poly(glycolide-caprolactone) Copolymer for Bioabsorbable Suture Materials | 2.1 | 6 | Citations (PDF) |
| 623 | Fabrication and Capacitance of Co3O4-Graphene Nanocomposites Electrode Prepared by Pulse Microwave-assisted Reduction Methods | 2.1 | 15 | Citations (PDF) |
| 624 | Preparation and Characterization of Carbon Nanotubes-Based Composite Electrodes for Electric Double Layer Capacitors | 2.1 | 3 | Citations (PDF) |
| 625 | Thermal Stability and Fracture Toughness of Epoxy Resins Modified with Epoxidized Castor Oil and Al2O3Nanoparticles | 2.1 | 17 | Citations (PDF) |
| 626 | Bridge effect of carbon nanotubes on the electrical properties of expanded graphite/poly(ethylene terephthalate) nanocomposites | 4.9 | 20 | Citations (PDF) |
| 627 | Comprehensive review on synthesis and adsorption behaviors of graphene-based materials | 4.9 | 44 | Citations (PDF) |
| 628 | Synthesis and Electrochemical Performance of Polypyrrole-Coated Iron Oxide/Carbon Nanotube Composites | 4.9 | 15 | Citations (PDF) |
| 629 | Improvement of Superhydrophobicity of Multi-Walled Carbon Nanotubes Produced by Fluorination | 4.9 | 9 | Citations (PDF) |
| 630 | Electromagnetic Interference Shielding Effectiveness and Mechanical Properties of MWCNT-reinforced Polypropylene Nanocomposites | 0.9 | 5 | Citations (PDF) |
| 631 | Trend of Carbon Fiber-reinforced Composites for Lightweight Vehicles | 0.2 | 49 | Citations (PDF) |
| 632 | Preparation and Characteristics of Poly(ε-caprolactone) Microcapsules Containing Pseudomonas by W/O/W Emulsion | 0.9 | 0 | Citations (PDF) |
| 633 | Effect of KOH Activation on Electrochemical Behaviors of Graphite Nanofibers | 0.9 | 0 | Citations (PDF) |
| 634 | Influence of Acid and Base Surface Treatment of Multi-Walled Carbon Nanotubes on Mechanical Interfacial Properties of Carbon Fibers-Reinforced Composites | 0.9 | 2 | Citations (PDF) |
| 635 | Influence of KOH Activation on Electrochemical Performance of Coal Tar Pitch-based Activated Carbons for Supercapacitor | 0.9 | 5 | Citations (PDF) |
| 636 | Influence of Activation Temperature on Electrochemical Performances of Styrene-Acrylonitrile Based Porous Carbons | 0.9 | 0 | Citations (PDF) |
| 637 | Role of the p21-activated kinases (PAKs) in influenza A virus replication | 2.1 | 24 | Citations (PDF) |
| 638 | Synthesis of nano-scale coated manganese oxide on graphite nanofibers and their high electrochemical performance | 4.5 | 5 | Citations (PDF) |
| 639 | Effect of monomer concentration on interfacial synthesis of platinum loaded polyaniline nanocomplex using poly(styrene sulfonic acid) | 4.5 | 17 | Citations (PDF) |
| 640 | Preparation and Characterization of Highly Porous Carbons for Hydrogen Storage | 0.6 | 2 | Citations (PDF) |
| 641 | Improvement of the Electrical Conductivity of Carbon Fibers Through the Growth of Carbon Nanofibers | 0.6 | 5 | Citations (PDF) |
| 642 | Thermal and mechanical interfacial properties of epoxy composites based on functionalized carbon nanotubes | 6.3 | 111 | Citations (PDF) |
| 643 | Fibers spun from 1,4-cyclohexanedimethanol-modified polyethylene terephthalate resin | 5.8 | 27 | Citations (PDF) |
| 644 | Preparation and characterization of ordered porous carbons for increasing hydrogen storage behaviors | 3.2 | 35 | Citations (PDF) |
| 645 | Influence of silver-decorated multi-walled carbon nanotubes on electrochemical performance of polyaniline-based electrodes | 3.2 | 23 | Citations (PDF) |
| 646 | Influence of amine-grafted multi-walled carbon nanotubes on physical and rheological properties of PMMA-based nanocomposites | 3.2 | 19 | Citations (PDF) |
| 647 | Functionalization of multi-walled carbon nanotubes by epoxide ring-opening polymerization | 3.2 | 44 | Citations (PDF) |
| 648 | Influence of multi-walled carbon nanotubes on electrochemical performance of transparent graphene electrodes | 5.3 | 10 | Citations (PDF) |
| 649 | Synthesis of nitrogen doped microporous carbons prepared by activation-free method and their high electrochemical performance | 5.3 | 38 | Citations (PDF) |
| 650 | Effect of activated graphite nanofibers on electrochemical activities of Pt–Ru nanoparticles for fuel cells | 3.0 | 3 | Citations (PDF) |
| 651 | Effect of nitrogen-containing groups on enhanced capacitive behaviors of multi-walled carbon nanotubes | 3.2 | 28 | Citations (PDF) |
| 652 | Roles of Ni/CNTs hybridization on rheological and mechanical properties of CNTs/epoxy nanocomposites | 6.3 | 18 | Citations (PDF) |
| 653 | Influence of GMA grafted MWNTs on physical and rheological properties of PMMA-based nanocomposites by in situ polymerization | 2.8 | 14 | Citations (PDF) |
| 654 | Influence of glyceryl palmitostearate on release behaviors of hydroxypropyl cellulose microcapsules containing indomethacin by W/O emulsion | 2.8 | 4 | Citations (PDF) |
| 655 | Point‐bonded electrospun polystyrene fibrous mats fabricated via the addition of poly(butylacrylate) adhesive | 3.4 | 4 | Citations (PDF) |
| 656 | Polymer nanofiber‐templated fabrication and characterization of gallium oxide nanofibers consisting of granular nanoparticles | 3.3 | 9 | Citations (PDF) |
| 657 | Influence of electro-beam irradiation on PTC/NTC behaviors of carbon blacks/HDPE conducting polymer composites | 2.7 | 47 | Citations (PDF) |
| 658 | Roles of nanosized Fe3O4 on supercapacitive properties of carbon nanotubes | 2.7 | 107 | Citations (PDF) |
| 659 | Influence of multi-walled carbon nanotubes on the electrochemical performance of graphene nanocomposites for supercapacitor electrodes | 5.3 | 99 | Citations (PDF) |
| 660 | Synthesis of carbon-coated graphene electrodes and their electrochemical performance | 5.3 | 44 | Citations (PDF) |
| 661 | Optimization of the pore structure of nickel/graphite hybrid materials for hydrogen storage | 9.0 | 43 | Citations (PDF) |
| 662 | Effect of platinum doping of activated carbon on hydrogen storage behaviors of metal-organic frameworks-5 | 9.0 | 91 | Citations (PDF) |
| 663 | Effect of Ni catalyst dispersion on the growth of carbon nanofibers onto carbon fibers | 4.6 | 26 | Citations (PDF) |
| 664 | Influence of dispersion of multi-walled carbon nanotubes on the electrochemical performance of PEDOT–PSS films | 4.2 | 9 | Citations (PDF) |
| 665 | Oxidation behavior of IG and NBG nuclear graphites | 1.8 | 40 | Citations (PDF) |
| 666 | Effects of nickel coating thickness on electric properties of nickel/carbon hybrid fibers | 5.7 | 39 | Citations (PDF) |
| 667 | Synthesis of Mesoporous Anatase TiO2 Nanotubes by a Hydrothermal Treatment and Their Use in Solid-State Dye-Sensitized Solar Cells | 0.6 | 5 | Citations (PDF) |
| 668 | Conjugate Spun of Polyethylene Terephthalate Resin Modified with 1,4-Cyclohexanedimethanol | 2.1 | 6 | Citations (PDF) |
| 669 | High Accuracy Mass Measurement Approach in the Identification of Phospholipids in Lipid Extracts: 7 T Fourier-transform Mass Spectrometry and MS/MS Validation | 2.1 | 1 | Citations (PDF) |
| 670 | Elemental Mercury Adsorption Behaviors of Chemically Modified Activated Carbons | 2.1 | 17 | Citations (PDF) |
| 671 | A Study of the Optimum Pore Structure for Mercury Vapor Adsorption | 2.1 | 10 | Citations (PDF) |
| 672 | Roles of Nickel Layer Deposition on Surface and Electric Properties of Carbon Fibers | 2.1 | 5 | Citations (PDF) |
| 673 | Influence of Amine Grafting on Carbon Dioxide Adsorption Behaviors of Activated Carbons | 2.1 | 18 | Citations (PDF) |
| 674 | Structuring of Bulk Silicon Particles for Lithium-Ion Battery Applications | 2.8 | 3 | Citations (PDF) |
| 675 | Thermal Insulation Properties of Epoxy/Mesoporous Carbon Composites | 4.9 | 6 | Citations (PDF) |
| 676 | A review of the preparation and properties of carbon nanotubes-reinforced polymer compositess | 4.9 | 71 | Citations (PDF) |
| 677 | Influence of phosphoric acid treatment on hydrogen adsorption behaviors of activated carbons | 4.9 | 15 | Citations (PDF) |
| 678 | A review of elemental mercury removal processing | 4.9 | 8 | Citations (PDF) |
| 679 | Effect of potassium permanganate pretreatment of pitch on the textural properties of pitch-based activated carbons | 4.9 | 6 | Citations (PDF) |
| 680 | Effect of crystallinity on the electrochemical properties of carbon black electrodes | 4.9 | 22 | Citations (PDF) |
| 681 | Study on Ionic Conductivity and Crystallinity of PEO/PMMA Polymer Composite Electrolytes containing TiO<sub>2</sub>Filler | 0.2 | 3 | Citations (PDF) |
| 682 | Structuring of Bulk Silicon Particles for Lithium-Ion Battery Applications | 2.8 | 0 | Citations (PDF) |
| 683 | Electrochemical Behaviors of Polymer Composite Electrolytes Containing Functionalized Nanosize Clays | 0.6 | 4 | Citations (PDF) |
| 684 | Multi-Walled Carbon Nanotubes Fabricated by Electrospinning of Acrylonitrile/Nylon Solution and Subsequent Carbonization | 0.6 | 0 | Citations (PDF) |
| 685 | Electrocatalytic performance of bimetallic platinum–ruthenium nanoclusters supported on graphite nanofibers | 2.7 | 5 | Citations (PDF) |
| 686 | Influence of CO2 activation on hydrogen storage behaviors of platinum-loaded activated carbon nanotubes | 3.2 | 24 | Citations (PDF) |
| 687 | Influence of crystallinity on ion conductivity of PEO-based solid electrolytes for lithium batteries | 2.8 | 43 | Citations (PDF) |
| 688 | Effect of solvents on high aspect ratio polyamide-6 nanofibers via electrospinning | 2.8 | 38 | Citations (PDF) |
| 689 | Thermal stability and impact and flexural properties of epoxy resins/epoxidized castor oil/nano-CaCO3 ternary systems | 2.8 | 42 | Citations (PDF) |
| 690 | Influence of enhanced dispersity of chemically treated MWNTs on physical properties of MWNTs/PVDF films | 2.8 | 20 | Citations (PDF) |
| 691 | Preparation and characterization of water-soluble microcapsule for sustained drug release using Eudragit RS 100 | 2.8 | 9 | Citations (PDF) |
| 692 | Mechanical properties of titania nanofiber mats fabricated by electrospinning of sol–gel precursor | 2.7 | 37 | Citations (PDF) |
| 693 | Electrochemical properties of carbon nanotube-supported metallic catalysts prepared by changing a sweep- or step-applied potential | 3.0 | 4 | Citations (PDF) |
| 694 | Electrical double-layer capacitor performance of nitrogen-doped ordered mesoporous carbon prepared by nanotemplating method | 3.0 | 9 | Citations (PDF) |
| 695 | Characterization of nanoporous β-SiC fiber complex prepared by electrospinning and carbothermal reduction | 3.0 | 25 | Citations (PDF) |
| 696 | Synthesis and characterization of chemically modified polystyrene as processable carbon fiber precursors | 3.0 | 5 | Citations (PDF) |
| 697 | Effect of chemical treatments on hydrogen storage behaviors of multi-walled carbon nanotubes | 4.4 | 23 | Citations (PDF) |
| 698 | Preparation and electrochemical characteristics of mesoporous carbon spheres for supercapacitors | 5.3 | 23 | Citations (PDF) |
| 699 | Formation of electrospun nylon-6/methoxy poly(ethylene glycol) oligomer spider-wave nanofibers | 2.5 | 64 | Citations (PDF) |
| 700 | Silver Nanofibres by a Novel Electrospinning Process: Nanofibres with Plasmon Resonance in the IR Region and Thermal Hysteresis Electrical Conductivity Features | 1.8 | 13 | Citations (PDF) |
| 701 | Effect of fluorination of carbon nanotubes on superhydrophobic properties of fluoro-based films | 9.9 | 67 | Citations (PDF) |
| 702 | Copper oxide-decorated porous carbons for carbon dioxide adsorption behaviors | 9.9 | 103 | Citations (PDF) |
| 703 | A study on hydrogen-storage behaviors of nickel-loaded mesoporous MCM-41 | 9.9 | 68 | Citations (PDF) |
| 704 | Effect of heat treatment on CO2 adsorption of KOH-activated graphite nanofibers | 9.9 | 138 | Citations (PDF) |
| 705 | A study on rheological behavior of MWCNTs/epoxy composites | 5.8 | 33 | Citations (PDF) |
| 706 | Rheological behaviors and mechanical properties of graphite nanoplate/carbon nanotube-filled epoxy nanocomposites | 5.8 | 61 | Citations (PDF) |
| 707 | Effect of temperature on activated carbon nanotubes for hydrogen storage behaviors | 9.0 | 67 | Citations (PDF) |
| 708 | Hydrogen storage behaviors of platinum-supported multi-walled carbon nanotubes | 9.0 | 85 | Citations (PDF) |
| 709 | Effect of annealing temperature on electrochemical characteristics of ruthenium oxide/multi-walled carbon nanotube composites | 4.2 | 24 | Citations (PDF) |
| 710 | Preparation and characterization of carbon-related materials supports for catalysts of direct methanol fuel cells | 2.7 | 18 | Citations (PDF) |
| 711 | Formation of high aspect ratio polyamide-6 nanofibers via electrically induced double layer during electrospinning | 6.6 | 44 | Citations (PDF) |
| 712 | Characterization and release behaviors of porous PCL/Eudragit RS microcapsules containing tulobuterol | 5.3 | 21 | Citations (PDF) |
| 713 | Effect of porous silica on sustained release behaviors of pH sensitive Pluronic F127/poly(acrylic acid) hydrogels containing tulobuterol | 5.3 | 43 | Citations (PDF) |
| 714 | Fitting of kinetic parameters of NO reduction by CO in fibrous media using a genetic algorithm | 3.5 | 6 | Citations (PDF) |
| 715 | Temperature effects on the fracture behavior and tensile properties of silane-treated clay/epoxy nanocomposites | 12.8 | 54 | Citations (PDF) |
| 716 | Influence of air-oxidation on electric double layer capacitances of multi-walled carbon nanotube electrodes | 2.7 | 50 | Citations (PDF) |
| 717 | Effect of nanosize titanium oxide on electrochemical characteristics of activated carbon electrodes | 2.7 | 32 | Citations (PDF) |
| 718 | Preparation and characterization of poly(vinyl alcohol) nanofiber mats crosslinked with blocked isocyanate prepolymer | 3.3 | 38 | Citations (PDF) |
| 719 | Physical Characteristics of Titania Nanofibers Synthesized by Sol-Gel and Electrospinning Techniques | 1.1 | 2 | Citations (PDF) |
| 720 | Anodization of Carbon Fibers on Interfacial Mechanical Properties of Epoxy Matrix Composites | 0.6 | 17 | Citations (PDF) |
| 721 | Effect of silver doped MWCNTs on the electrical properties of conductive MWCNTs/PMMA thin films | 4.5 | 15 | Citations (PDF) |
| 722 | Influence of Ag doped graphene on electrochemical behaviors and specific capacitance of polypyrrole-based nanocomposites | 4.5 | 58 | Citations (PDF) |
| 723 | Synthesis and characterization of bovine femur bone hydroxyapatite containing silver nanoparticles for the biomedical applications | 2.4 | 65 | Citations (PDF) |
| 724 | Reduction Behaviors of Nitric Oxides on Copper-decorated Mesoporous Molecular Sieves | 2.1 | 3 | Citations (PDF) |
| 725 | Paclitaxel Coating Inhibits Inflammation Surrounding Subcutaneously Implanted Expanded Polytetrafluoroethylene (ePTFE) Hemodialysis Grafts in Rabbit Model | 2.1 | 5 | Citations (PDF) |
| 726 | Effect of O2Plasma Treatments of Carbon Supports on Pt-Ru Electrocatalysts | 2.1 | 8 | Citations (PDF) |
| 727 | A Study of Atmospheric Plasma Treatment on Surface Energetics of Carbon Fibers | 2.1 | 26 | Citations (PDF) |
| 728 | Effects of Spinning Conditions on Properties of Polyester Yarn Prepared using an Ultra-high-speed Melt Spinning Technique Equipped with a Steam Chamber | 2.1 | 4 | Citations (PDF) |
| 729 | Studies on Morphologies and Mechanical Properties of Multi-walled Carbon Nanotubes/Epoxy Matrix Composites | 2.1 | 3 | Citations (PDF) |
| 730 | Hydrogen Adsorption of Acid-treated Multi-walled Carbon Nanotubes at Low Temperature | 2.1 | 27 | Citations (PDF) |
| 731 | Effects of Graphenes/CNTs Co-reinforcement on Electrical and Mechanical Properties of HDPE Matrix Nanocomposites | 2.1 | 19 | Citations (PDF) |
| 732 | A Study on Electrical and Thermal Properties of Polyimide/MWNT Nanocomposites | 2.1 | 23 | Citations (PDF) |
| 733 | Particle Dispersibility Improvement of Polyester Fibers with a New Line Injection | 2.1 | 4 | Citations (PDF) |
| 734 | Surface Treatment of Multi-walled Carbon Nanotubes for Increasing Electric Double-layer Capacitance | 0.2 | 4 | Citations (PDF) |
| 735 | Effect of Heat Treatment on CO2Adsorption of Ammonized Graphite Nanofibers | 4.9 | 9 | Citations (PDF) |
| 736 | Influence of Surface Treatment of Multi-walled Carbon Nanotubes on Interfacial Interaction of Nanocomposites | 4.9 | 10 | Citations (PDF) |
| 737 | Present Status and Applications of Carbon Fibers-reinforced Composites for Aircrafts | 4.9 | 10 | Citations (PDF) |
| 738 | Influence of Glycidyl Methacrylate Grafted Multi-walled Carbon Nanotubes on Viscoelastic Behaviors of Polypropylene Nanocomposites | 4.9 | 8 | Citations (PDF) |
| 739 | Necessity of Development on New Types of Activated Carbons for Advanced Drinking Water Purification Technology | 4.9 | 1 | Citations (PDF) |
| 740 | Nuclear Graphites (II) : Mechanical Properties | 4.9 | 2 | Citations (PDF) |
| 741 | Effects of Injection Conditions on Dispersibility of TiO2in Polymerization of Poly(ethylene terephthalate) | 2.1 | 1 | Citations (PDF) |
| 742 | Influence of SiC Electron Acceptor–Donor Modification on Thermal and Physical Properties of Carbon Fiber/SiC/Epoxy Composites | 2.3 | 2 | Citations (PDF) |
| 743 | Preparation and Characterization of ACs/TiO2 Composite Electrodes for Improving the Specific Capacitance of Electrochemical Double-Layer Capacitors | 0.6 | 1 | Citations (PDF) |
| 744 | Superior prospect of chemically activated electrospun carbon fibers for hydrogen storage | 5.3 | 66 | Citations (PDF) |
| 745 | Selective particle distribution and mechanical properties of nano‐CaCO3/ethylene‐propylene‐diene terpolymer/polypropylene composites with high content of nano‐CaCO3 | 2.7 | 10 | Citations (PDF) |
| 746 | Electrochemical characteristics of activated carbon nanofiber electrodes for supercapacitors | 4.2 | 70 | Citations (PDF) |
| 747 | Preparation and electrochemical characterization of platinum and ruthenium catalysts deposited on fluorinated carbon supports | 2.5 | 3 | Citations (PDF) |
| 748 | Effect of substituted trifluoromethyl groups on thermal and mechanical properties of fluorine-containing epoxy resin | 2.8 | 17 | Citations (PDF) |
| 749 | Influence of oxyfluorination on physicochemical characteristics of carbon fibers and their reinforced epoxy composites | 2.8 | 9 | Citations (PDF) |
| 750 | Studies on cure behaviors, dielectric characteristics and mechanical properties of DGEBA/poly(ethylene terephthalate) blends | 2.8 | 8 | Citations (PDF) |
| 751 | Effects of a silane treatment on the mechanical interfacial properties of montmorillonite/epoxy nanocomposites | 6.3 | 86 | Citations (PDF) |
| 752 | Preparation and electrochemical properties of composite polymer electrolytes containing 1-ethyl-3-methylimidazolium tetrafluoroborate salts | 5.3 | 37 | Citations (PDF) |
| 753 | The metal–carbon–fluorine system for improving hydrogen storage by using metal and fluorine with different levels of electronegativity | 9.0 | 46 | Citations (PDF) |
| 754 | Hydrogen storage evaluation based on investigations of the catalytic properties of metal/metal oxides in electrospun carbon fibers | 9.0 | 60 | Citations (PDF) |
| 755 | 1.25-Gb/s bidirectional colorless WDM-PON based on RSOA using subcarrier detection and optical carrier suppression | 2.5 | 6 | Citations (PDF) |
| 756 | Nitrogen and hydrogen adsorption of activated carbon fibers modified by fluorination | 5.8 | 75 | Citations (PDF) |
| 757 | Thermomechanical properties of graphite nanofibers/poly(methyl methacrylate) composites | 6.3 | 8 | Citations (PDF) |
| 758 | Surface characteristics of carbon fibers modified by direct oxyfluorination | 9.9 | 61 | Citations (PDF) |
| 759 | Interlayer spacing effect of alkylammonium-modified montmorillonite on conducting and mechanical behaviors of polymer composite electrolytes | 9.9 | 27 | Citations (PDF) |
| 760 | Influence of atmospheric fluorine plasma treatment on thermal and dielectric properties of polyimide film | 9.9 | 32 | Citations (PDF) |
| 761 | Electrocatalytic properties of graphite nanofibers-supported platinum catalysts for direct methanol fuel cells | 9.9 | 20 | Citations (PDF) |
| 762 | Self-Assembled Columnar Structures of Swallow-Shaped Tetrathiafulvalene-Based Molecules | 6.7 | 15 | Citations (PDF) |
| 763 | Phase Behaviors and Structures of a Symmetrically Tapered Biphenylamide | 2.7 | 12 | Citations (PDF) |
| 764 | Columnar Structures from Asymmetrically Tapered Biphenylamide | 2.7 | 10 | Citations (PDF) |
| 765 | Hybrid WDM/TDMA-PON Using Self-Homodyne and Differential Coding | 1.8 | 21 | Citations (PDF) |
| 766 | Colour-tunable spiral photonic actuators | 7.3 | 34 | Citations (PDF) |
| 767 | Electrochemical Behaviors of Polymer Composite Electrolytes Containing Imidazolium-Type Room-Temperature Molten Salts | 0.6 | 0 | Citations (PDF) |
| 768 | In vitro bioactivity of sol–gel-derived hydroxyapatite particulate nanofiber modified titanium | 3.6 | 18 | Citations (PDF) |
| 769 | Hydrogen Storage Behaviors of Carbon Nanotubes/Metal-organic Frameworks-5 Hybrid Composites | 4.9 | 12 | Citations (PDF) |
| 770 | Carbon Fibers(III): Recent Technical and Patent Trends | 4.9 | 5 | Citations (PDF) |
| 771 | Preparation and Electroactivities of Carbon Nanotubes-supported Metal Catalyst Electrodes Prepared by a Potential Cycling | 4.9 | 1 | Citations (PDF) |
| 772 | CO2Adsorption of Amine Functionalized Activated Carbons | 4.9 | 19 | Citations (PDF) |
| 773 | Nuclear Graphites (I) : Oxidation Behaviors | 4.9 | 9 | Citations (PDF) |
| 774 | Preparation and Characterization of Poly(amide imide)-based Carbon Nanofibers/Epoxy Nanocomposites | 4.9 | 5 | Citations (PDF) |
| 775 | Electrical and Mechanical Properties of Graphite Nanosheet/Carbon Nanotubes-filled Epoxy Nanocomposites | 4.9 | 9 | Citations (PDF) |
| 776 | Preparation and electrocatalytic activities of platinum nanoclusters deposited on modified multi-walled carbon nanotubes supports | 5.7 | 34 | Citations (PDF) |
| 777 | An experimental study on the effect of mesoporous silica addition on ion conductivity of poly(ethylene oxide) electrolytes | 2.7 | 14 | Citations (PDF) |
| 778 | Preparation and characterization of Pt-supported porous graphite nanofibers | 2.7 | 4 | Citations (PDF) |
| 779 | Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils | 3.3 | 116 | Citations (PDF) |
| 780 | A study of atmospheric-pressure CHF3/Ar plasma treatment on dielectric characteristics of polyimide films | 9.9 | 19 | Citations (PDF) |
| 781 | The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption | 9.9 | 153 | Citations (PDF) |
| 782 | Impact-strength improvement of epoxy resins reinforced with a biodegradable polymer | 6.3 | 138 | Citations (PDF) |
| 783 | Thermo-mechanical behaviors of butadiene rubber reinforced with nano-sized calcium carbonate | 6.3 | 39 | Citations (PDF) |
| 784 | Electrical signal effect on electrochemical activities of metal catalysts electrically deposited on carbon nanotubes | 5.3 | 27 | Citations (PDF) |
| 785 | Electroactivity of Pt–Ru/polyaniline composite catalyst-electrodes prepared by electrochemical deposition methods | 3.1 | 35 | Citations (PDF) |
| 786 | Application of polymer-modified nanoporous silica to adsorbents of uranyl ions | 5.2 | 51 | Citations (PDF) |
| 787 | Preparation and characterization of mesoporous carbon-supported Pt nanocatalyst and its stability under strong acidic solutions | 5.2 | 7 | Citations (PDF) |
| 788 | Preparation and electrochemical behaviors of platinum nanocluster catalysts deposited on plasma-treated carbon nanotube supports | 5.2 | 4 | Citations (PDF) |
| 789 | Ionic conductivity of polymeric nanocomposite electrolytes based on poly(ethylene oxide) and organo-clay materials | 5.2 | 70 | Citations (PDF) |
| 790 | Catalytic activity of electrically deposited platinum nanoparticle catalysts on graphite nanofibers | 5.2 | 13 | Citations (PDF) |
| 791 | Preparation of functionalized nanoporous carbons for uranium loading | 5.2 | 39 | Citations (PDF) |
| 792 | Influence of copper electroplating on high pressure hydrogen-storage behaviors of activated carbon fibers | 9.0 | 70 | Citations (PDF) |
| 793 | Novel porous carbons synthesized from polymeric precursors for hydrogen storage | 9.0 | 80 | Citations (PDF) |
| 794 | A study on the hydrogen storage capacity of Ni-plated porous carbon nanofibers | 9.0 | 115 | Citations (PDF) |
| 795 | The effect of embedded vanadium catalyst on activated electrospun CFs for hydrogen storage | 4.6 | 73 | Citations (PDF) |
| 796 | Interfacial toughness properties of trifunctional epoxy resins/calcium carbonate nanocomposites | 6.3 | 65 | Citations (PDF) |
| 797 | Synthesis and characterization of hyper-branched polyimides from 2,4,6-triaminopyrimidine and dianhydrides system | 4.4 | 41 | Citations (PDF) |
| 798 | Enhancement of the Performance of a Reflective SOA-Based Hybrid WDM/TDM PON System With a Remotely Pumped Erbium-Doped Fiber Amplifier | 3.5 | 46 | Citations (PDF) |
| 799 | Chemical Surface Treatment for Highly Improved Dispersibility of Multi‐Walled Carbon Nanotubes in Water | 2.4 | 18 | Citations (PDF) |
| 800 | Preparation and Characterization of Highly Conductive Nickel-coated Glass Fibers | 4.9 | 10 | Citations (PDF) |
| 801 | Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers | 4.9 | 4 | Citations (PDF) |
| 802 | Patent Trends of Carbonaceous Materials for Hydrogen Storage (III): Major Applicants & Technology Flow-chart | 4.9 | 2 | Citations (PDF) |
| 803 | Carbon Fibers (II): Recent Technical Trends and Market Prospects of Carbon Fibers | 4.9 | 2 | Citations (PDF) |
| 804 | The Polarization Changing Speed of the LightDepolarized by a Simple Depolarizer | 3.5 | 8 | Citations (PDF) |
| 805 | An Evolution Scenario of a Broadband Access Network Using R-SOA-Based WDM-PON Technologies | 3.5 | 21 | Citations (PDF) |
| 806 | Preparation and ion-conducting behaviors of poly(ethylene oxide)-composite electrolytes containing lithium montmorillonite | 3.1 | 77 | Citations (PDF) |
| 807 | Effect of imidazolium cation on cycle life characteristics of secondary lithium–sulfur cells using liquid electrolytes | 5.3 | 74 | Citations (PDF) |
| 808 | Effect of acid/base treatment to carbon blacks on preparation of carbon-supported platinum nanoclusters | 5.3 | 58 | Citations (PDF) |
| 809 | Preparation and electrochemical behaviors of polymeric composite electrolytes containing mesoporous silicate fillers | 5.3 | 44 | Citations (PDF) |
| 810 | Improvement in fracture behaviors of epoxy resins toughened with sulfonated poly(ether sulfone) | 7.1 | 54 | Citations (PDF) |
| 811 | A study on pore-opening behaviors of graphite nanofibers by a chemical activation process | 9.9 | 35 | Citations (PDF) |
| 812 | Preparation and characteristics of electrospun activated carbon materials having meso- and macropores | 9.9 | 99 | Citations (PDF) |
| 813 | Effect of maleylation on physicochemical properties of soybean glycinin | 2.8 | 4 | Citations (PDF) |
| 814 | Effect of fluorine functional groups on surface and mechanical interfacial properties of epoxy resins | 1.6 | 17 | Citations (PDF) |
| 815 | Physicochemical characterization of self-assembled poly(∈-caprolactone) grafted dextran nanoparticles | 2.1 | 20 | Citations (PDF) |
| 816 | Study on Fracture Behavior of Surface Treated Montmorillonite/Epoxy Nanocomposites | 0.6 | 2 | Citations (PDF) |
| 817 | X-ray Photoelectron Spectroscopy Study of Cobalt Supported Multi-walled Carbon Nanotubes Prepared by Different Precursors | 4.9 | 53 | Citations (PDF) |
| 818 | A Study on Electrical Resistivity Behaviors of PAN-based Carbon Nanofiber Webs | 4.9 | 0 | Citations (PDF) |
| 819 | Electrochemical Behaviors of Activated Carbons Prepared from Polymeric Precursor | 4.9 | 0 | Citations (PDF) |
| 820 | Patent Trends of Carbonaceous Materials for Hydrogen Storage: Quantitative Analysis | 4.9 | 1 | Citations (PDF) |
| 821 | Patent Trends of Carbonaceous Materials for Hydrogen Storage (II): Qualitative Analysis | 4.9 | 1 | Citations (PDF) |
| 822 | Preparation of nanoporous carbons from graphite nanofibres | 2.6 | 27 | Citations (PDF) |
| 823 | Thermal properties and toughness performance of hyperbranched-polyimide-modified epoxy resins | 2.6 | 109 | Citations (PDF) |
| 824 | Fracture and adhesion behaviors of epoxy resins modified with poly(amine-quinone) | 3.3 | 9 | Citations (PDF) |
| 825 | Effect of side-chain length of succinic anhydride on coefficient of thermal expansion behavior of epoxy resins | 3.3 | 8 | Citations (PDF) |
| 826 | Release behaviors of porous poly(butylene succinate)/poly(ɛ-caprolactone) microcapsules containing indomethacin | 5.3 | 28 | Citations (PDF) |
| 827 | Surface treatment of montmorillonite on the thermal stabilities of bisphenol-A diglycidyl dimethacrylate nanocomposites | 6.3 | 23 | Citations (PDF) |
| 828 | Effects of chemical treatment of carbon supports on electrochemical behaviors for platinum catalysts of fuel cells | 7.9 | 75 | Citations (PDF) |
| 829 | Adsorption behavior of propylamine on activated carbon fiber surfaces as induced by oxygen functional complexes | 9.9 | 41 | Citations (PDF) |
| 830 | WDM-PON system based on the laser light injected reflective semiconductor optical amplifier | 2.5 | 38 | Citations (PDF) |
| 831 | Influence of plasma treatment of carbon blacks on electrochemical activity of Pt/carbon blacks catalysts for DMFCs | 7.9 | 40 | Citations (PDF) |
| 832 | A study on physicochemical properties of epoxy coating system for nuclear power plants | 1.8 | 20 | Citations (PDF) |
| 833 | Roles of interfaces between carbon fibers and epoxy matrix on interlaminar fracture toughness of composites | 2.3 | 23 | Citations (PDF) |
| 834 | Preparation and electrochemical behaviors of platinum nanoparticles impregnated on binary carbon supports as catalyst electrodes of direct methanol fuel cells | 2.3 | 26 | Citations (PDF) |
| 835 | Preparation and Characterization of Electrospun Poly(ethylene oxide) (PEO) Nanofibers-reinforced Epoxy Matrix Composites | 0.1 | 3 | Citations (PDF) |
| 836 | Effects of imidazolium salts on discharge performance of rechargeable lithium–sulfur cells containing organic solvent electrolytes | 7.9 | 75 | Citations (PDF) |
| 837 | Preparation and physical properties of hollow glass microspheres-reinforced epoxy matrix resins | 6.3 | 160 | Citations (PDF) |
| 838 | Effect of surface oxyfluorination on the dyeability of polyethylene film | 9.9 | 27 | Citations (PDF) |
| 839 | Influence of fluorination on surface and dielectric characteristics of polyimide thin film | 9.9 | 31 | Citations (PDF) |
| 840 | A study on NO removal of activated carbon fibers with deposited silver nanoparticles | 9.9 | 35 | Citations (PDF) |
| 841 | Effect of ozone treatment on ammonia removal of activated carbons | 9.9 | 106 | Citations (PDF) |
| 842 | Oxidation behaviors of metallic copper particles in NO reduction mechanism of copper/activated carbons | 9.9 | 20 | Citations (PDF) |
| 843 | Synthesis of a novel siloxane-containing diamine for increasing flexibility of epoxy resins | 6.3 | 52 | Citations (PDF) |
| 844 | Roles of acidic functional groups of carbon fiber surfaces in enhancing interfacial adhesion behavior | 6.3 | 186 | Citations (PDF) |
| 845 | Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts | 5.9 | 81 | Citations (PDF) |
| 846 | Effect of oxygen plasma treatment on the release behaviors of poly(ɛ-caprolactone) microcapsules containing tocopherol | 5.3 | 15 | Citations (PDF) |
| 847 | Effect of poly(ethylene oxide) on the release behaviors of poly(ɛ-caprolactone) microcapsules containing erythromycin | 5.3 | 30 | Citations (PDF) |
| 848 | Influence of hydrophobe on the release behavior of vinyl acetate miniemulsion polymerization | 5.3 | 10 | Citations (PDF) |
| 849 | Substitution effects of methyl and trifluoromethyl groups on the physicochemical properties of epoxy resins | 2.7 | 9 | Citations (PDF) |
| 850 | Effect of Alkyl Groups of Latent Cationic Catalysts on Cure and Dynamic Mechanical Behaviors of Epoxy Resins | 2.4 | 17 | Citations (PDF) |
| 851 | Physicochemical and mechanical interfacial properties of trifluorometryl groups containing epoxy resin cured with amine | 6.3 | 32 | Citations (PDF) |
| 852 | Adsorption behaviors of heavy metal ions onto electrochemically oxidized activated carbon fibers | 6.3 | 63 | Citations (PDF) |
| 853 | Influence of thermal treatment of nano-scaled silica on interfacial adhesion properties of the silica/rubber compounding | 6.3 | 23 | Citations (PDF) |
| 854 | Crystallization kinetics and interfacial behaviors of polypropylene composites reinforced with multi-walled carbon nanotubes | 6.3 | 217 | Citations (PDF) |
| 855 | Improvement of red mud polymer-matrix nanocomposites by red mud surface treatment | 9.9 | 41 | Citations (PDF) |
| 856 | Influence of atmospheric plasma on physicochemical properties of vapor-grown graphite nanofibers | 9.9 | 29 | Citations (PDF) |
| 857 | Effect of atmospheric-pressure plasma on adhesion characteristics of polyimide film | 9.9 | 78 | Citations (PDF) |
| 858 | Influence of surface characteristics of carbon blacks on cure and mechanical behaviors of rubber matrix compoundings | 9.9 | 70 | Citations (PDF) |
| 859 | NO removal of Ni-electroplated activated carbon fibers | 9.9 | 8 | Citations (PDF) |
| 860 | Ammonia removal of activated carbon fibers produced by oxyfluorination | 9.9 | 93 | Citations (PDF) |
| 861 | Cu(II) Adsorption of Activated Carbon Fibers Produced by Radiation-Induced Graft Polymerization | 2.7 | 7 | Citations (PDF) |
| 862 | Synthesis and characterization of UV-curable acrylic resin containing fluorine groups | 3.3 | 25 | Citations (PDF) |
| 863 | Rheological and mechanical properties of DGEBA-S epoxy copolymer initiated byN-benzylquinoxalinium hexafluoroantimonate | 3.3 | 3 | Citations (PDF) |
| 864 | Preparation and Characterization of Activated Carbon/Cu Catalyst by Electroless Copper Plating for Removal of NO | 2.7 | 10 | Citations (PDF) |
| 865 | A study on dielectric characteristics of fluorinated polyimide thin film | 9.9 | 80 | Citations (PDF) |
| 866 | Effect of acidic treatment on metal adsorptions of pitch-based activated carbon fibers | 9.9 | 42 | Citations (PDF) |
| 867 | Influence of anodic treatment on heavy metal ion removal by activated carbon fibers | 9.9 | 40 | Citations (PDF) |
| 868 | Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil | 6.3 | 229 | Citations (PDF) |
| 869 | Effect of the substituted benzene group on thermal and mechanical properties of epoxy resins initiated by cationic latent catalysts | 2.6 | 13 | Citations (PDF) |
| 870 | Rheological and mechanical properties of epoxy/polyurethane blends initiated byN-benzylpyrazinium hexafluoroantimonate salt | 2.6 | 18 | Citations (PDF) |
| 871 | Studies on epoxy resins cured by cationic latent thermal catalyst at elevated temperature | 3.3 | 4 | Citations (PDF) |
| 872 | Effect of Biodegradable Epoxidized Castor Oil on Physicochemical and Mechanical Properties of Epoxy Resins | 2.4 | 159 | Citations (PDF) |
| 873 | A Kinetic Study on the Thermal Degradation of Multi-Walled Carbon Nanotubes-Reinforced Poly(propylene) Composites | 4.1 | 61 | Citations (PDF) |
| 874 | Physical and Mechanical Interfacial Properties of Epoxy Copolymers Initiated by Latent Thermal Catalysts | 4.1 | 3 | Citations (PDF) |
| 875 | Synthesis and Thermal Properties of Epoxidized Vegetable Oil | 4.1 | 202 | Citations (PDF) |
| 876 | Effect of different cross-section types on mechanical properties of carbon fibers-reinforced cement composites | 6.3 | 44 | Citations (PDF) |
| 877 | A study of oxyfluorination of multi-walled carbon nanotubes on mechanical interfacial properties of epoxy matrix nanocomposites | 6.3 | 74 | Citations (PDF) |
| 878 | Effects of irradiation and design basis accident conditions on thermal properties of epoxy coating system for nuclear power plant | 1.8 | 8 | Citations (PDF) |
| 879 | Thermal and mechanical interfacial properties of the DGEBA/PMR-15 blend system | 9.9 | 19 | Citations (PDF) |
| 880 | Preparation and characterization of biodegradable poly(l-lactide)/poly(ethylene glycol) microcapsules containing erythromycin by emulsion solvent evaporation technique | 9.9 | 71 | Citations (PDF) |
| 881 | Influence of oxygen plasma treatment on hydrogen chloride removal of activated carbon fibers | 9.9 | 92 | Citations (PDF) |
| 882 | Thermal stabilities and dynamic mechanical properties of sulfone-containing epoxy resin cured with anhydride | 7.1 | 132 | Citations (PDF) |
| 883 | Effect of acid–base interaction between silica and fragrant oil in the PCL/PEG microcapsules | 5.3 | 19 | Citations (PDF) |
| 884 | Electrical resistivity and rheological behaviors of carbon nanotubes-filled polypropylene composites | 2.7 | 312 | Citations (PDF) |
| 885 | Fiber-to-the-Home Services Based on Wavelength-Division-Multiplexing Passive Optical Network | 3.5 | 330 | Citations (PDF) |
| 886 | Effect of acidic treatment on metal adsorptions of pitch-based activated carbon fibers | 9.9 | 0 | Citations (PDF) |
| 887 | Influence of Catalyst Content on the Thermal and Mechanical Properties of Epoxy Resins Initiated by a Cationic Latent Thermal Catalyst at Elevated Temperatures | 4.1 | 2 | Citations (PDF) |
| 888 | Surface characteristics of fluorine-modified PAN-based carbon fibers | 10.7 | 97 | Citations (PDF) |
| 889 | Filler–elastomer interactions: influence of oxygen plasma treatment on surface and mechanical properties of carbon black/rubber composites | 10.7 | 108 | Citations (PDF) |
| 890 | Studies on the mechanical and mechanical interfacial properties of carbon–carbon composites impregnated with an oxidation inhibitor | 10.7 | 22 | Citations (PDF) |
| 891 | Studies on pore structures and surface functional groups of pitch-based activated carbon fibers | 9.9 | 114 | Citations (PDF) |
| 892 | Effect of fluorine plasma treatment on PMMA and their application to passive optical waveguides | 9.9 | 22 | Citations (PDF) |
| 893 | Preparation and characterization of activated carbon fibers supported with silver metal for antibacterial behavior | 9.9 | 185 | Citations (PDF) |
| 894 | Studies on PAN-based carbon fibers irradiated by Ar+ ion beams | 9.9 | 18 | Citations (PDF) |
| 895 | Filler–elastomer interactions: influence of silane coupling agent on crosslink density and thermal stability of silica/rubber composites | 9.9 | 185 | Citations (PDF) |
| 896 | X-ray diffraction and X-ray photoelectron spectroscopy studies of Ni–P deposited onto carbon fiber surfaces: impact properties of a carbon-fiber-reinforced matrix | 9.9 | 39 | Citations (PDF) |
| 897 | Influence of copper content on NO removal of the activated carbon fibers produced by electroplating | 9.9 | 21 | Citations (PDF) |
| 898 | KOH activation and characterization of glass fibers-supported phenolic resin | 9.9 | 14 | Citations (PDF) |
| 899 | Relationship between surface characteristics and interlaminar shear strength of oxyfluorinated carbon fibers in a composite system | 9.9 | 35 | Citations (PDF) |
| 900 | Studies on mechanical interfacial properties of oxy-fluorinated carbon fibers-reinforced composites | 6.3 | 50 | Citations (PDF) |
| 901 | Stabilization of nematic liquid crystal dispersions with acrylamide copolymers and their electrooptical properties | 3.9 | 2 | Citations (PDF) |
| 902 | Effect of silane coupling agent on mechanical interfacial properties of glass fiber-reinforced unsaturated polyester composites | 2.6 | 65 | Citations (PDF) |
| 903 | Synthesis and characterization of ABA type tri-block copolymers derived fromp-dioxanone,L-lactide and poly(ethylene glycol) | 3.3 | 36 | Citations (PDF) |
| 904 | Thermal properties and fracture toughness of epoxy resins cured by phosphonium and pyrazinium salts as latent cationic initiators | 2.3 | 29 | Citations (PDF) |
| 905 | Electrokinetics of Carbon Fibers Produced by a Direct Oxyfluorination | 2.7 | 4 | Citations (PDF) |
| 906 | Fiber mats of poly(vinyl alcohol)/silica composite via electrospinning | 2.5 | 418 | Citations (PDF) |
| 907 | Effect of Cationic Initiator Content on Electron-beam Curing of Difunctional Epoxy Resin | 0.2 | 5 | Citations (PDF) |
| 908 | A Study on PTC/NTC Behavior of Fluorinated Carbon Black-filled HDPE Matrix Compounds | 0.2 | 0 | Citations (PDF) |
| 909 | Adhesion of brass/cobalt/copper-plated steel cord to a typical rubber compound | 3.3 | 4 | Citations (PDF) |
| 910 | Effect of plasma treatment of aluminum on the bonding characteristics of aluminum–CFRP composite joints | 3.3 | 28 | Citations (PDF) |
| 911 | A novel method for fabrication of a PLC platform for hybrid integration of an optical module by passive alignment | 1.8 | 17 | Citations (PDF) |
| 912 | Synthesis of high-silica-content mordenite with different SiO2/Al2O3 ratios by using benzene-1,2-diol as additives | 2.5 | 35 | Citations (PDF) |
| 913 | Neuropsychological profile in patients with obsessive-compulsive disorder over a period of 4-month treatment | 2.9 | 99 | Citations (PDF) |
| 914 | Interlaminar and Ductile Characteristics of Carbon Fibers-Reinforced Plastics Produced by Nanoscaled Electroless Nickel Plating on Carbon Fiber Surfaces | 9.9 | 84 | Citations (PDF) |
| 915 | Pore Structure and Surface Properties of Chemically Modified Activated Carbons for Adsorption Mechanism and Rate of Cr(VI) | 9.9 | 189 | Citations (PDF) |
| 916 | Effect of KOH Activation on the Formation of Oxygen Structure in Activated Carbons Synthesized from Polymeric Precursor | 9.9 | 131 | Citations (PDF) |
| 917 | Effect of Acidic Surface Treatment of Red Mud on Mechanical Interfacial Properties of Epoxy/Red Mud Nanocomposites | 9.9 | 39 | Citations (PDF) |
| 918 | Preparation and Structural Characterization of Activated Carbons Based on Polymeric Resin | 9.9 | 25 | Citations (PDF) |
| 919 | Surface Modification of Montmorillonite on Surface Acid–Base Characteristics of Clay and Thermal Stability of Epoxy/Clay Nanocomposites | 9.9 | 123 | Citations (PDF) |
| 920 | Effect of Chemical Treatment of Kevlar Fibers on Mechanical Interfacial Properties of Composites | 9.9 | 186 | Citations (PDF) |
| 921 | Roles of Work of Adhesion between Carbon Blacks and Thermoplastic Polymers on Electrical Properties of Composites | 9.9 | 89 | Citations (PDF) |
| 922 | Thermal and mechanical properties of diglycidylether of bisphenol A/ trimethylolpropane triglycidylether epoxy blends cured with benzylpyrazinium salts | 3.3 | 16 | Citations (PDF) |
| 923 | Surface treatment of CFRP composites by Ar+ irradiation to improve bonding strength between aluminum and CFRP composites | 4.9 | 7 | Citations (PDF) |
| 924 | Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method | 2.6 | 307 | Citations (PDF) |
| 925 | Effect of oxidation inhibitor on the low energy tribological behavior of carbon–carbon composites | 10.7 | 22 | Citations (PDF) |
| 926 | Title is missing! | 3.4 | 77 | Citations (PDF) |
| 927 | DWDM-based FTTC access network | 3.5 | 16 | Citations (PDF) |
| 928 | Thermal Stability of Imidized Epoxy Blends Initiated byN-Benzylpyrazinium Hexafluoroantimonate Salt | 5.0 | 100 | Citations (PDF) |
| 929 | Cationic cure of epoxy resin initiated by methylanilinium salts as a latent thermal initiator | 2.6 | 8 | Citations (PDF) |
| 930 | Delamination characteristics of multi-directional carbon fiber/epoxy composites under high pressure | 4.9 | 6 | Citations (PDF) |
| 931 | Relationship between viscoelastic properties and gelation in the epoxy/phenol-novolac blend system with N-benzylpyrazinium salt as a latent thermal catalyst | 2.7 | 8 | Citations (PDF) |
| 932 | Effect of Corona Discharge Treatment on the Dyeability of Low-Density Polyethylene Film | 9.9 | 70 | Citations (PDF) |
| 933 | Interfacial Characteristics and Fracture Toughness of Electrolytically Ni-Plated Carbon Fiber-Reinforced Phenolic Resin Matrix Composites | 9.9 | 93 | Citations (PDF) |
| 934 | Anodic Surface Treatment on Activated Carbons for Removal of Chromium(VI) | 9.9 | 13 | Citations (PDF) |
| 935 | Preparation and Characterization of Microcapsules Containing Lemon Oil | 9.9 | 141 | Citations (PDF) |
| 936 | Effect of Silane Coupling Agent on Interphase and Performance of Glass Fibers/Unsaturated Polyester Composites | 9.9 | 174 | Citations (PDF) |
| 937 | Adsorption Behaviors of Chromium(III) and (VI) on Electroless Cu-Plated Activated Carbon Fibers | 9.9 | 17 | Citations (PDF) |
| 938 | Influence of Plasma Treatment on Microstructures and Acid–Base Surface Energetics of Nanostructured Carbon Blacks: N2 Plasma Environment | 9.9 | 75 | Citations (PDF) |
| 939 | Studies on surface energetics of glass fabrics in an unsaturated polyester matrix system: Effect of sizing treatment on glass fabrics | 2.7 | 35 | Citations (PDF) |
| 940 | Viscoelastic behavior of anhydride-cured epoxy system initiated by thermal latent catalyst | 2.7 | 5 | Citations (PDF) |
| 941 | Energetic studies on epoxy-polyurethane interpenetrating polymer networks | 2.7 | 56 | Citations (PDF) |
| 942 | Thermal stability and toughening of epoxy resin with polysulfone resin | 2.6 | 105 | Citations (PDF) |
| 943 | Near-infrared spectroscopic studies on the cure behaviors of the CAE/DGEBA blend system initiated by a thermal latent catalyst | 2.6 | 4 | Citations (PDF) |
| 944 | Studies on epoxy resins cured by cationic latent thermal catalysts: The effect of the catalysts on the thermal, rheological, and mechanical properties | 2.3 | 40 | Citations (PDF) |
| 945 | The effects of MoSi2 on the oxidation behavior of carbon/carbon composites | 10.7 | 68 | Citations (PDF) |
| 946 | Effect of modification with HNO3 and NaOH on metal adsorption by pitch-based activated carbon fibers | 10.7 | 490 | Citations (PDF) |
| 947 | Influence of activation temperature on adsorption characteristics of activated carbon fiber composites | 10.7 | 102 | Citations (PDF) |
| 948 | Modifications produced by electrochemical treatments on carbon blacks | 10.7 | 36 | Citations (PDF) |
| 949 | Title is missing! | 1.0 | 3 | Citations (PDF) |
| 950 | Surface energy characterization of modified carbon blacks and its relationship to composites tearing properties | 3.3 | 8 | Citations (PDF) |
| 951 | Surface Characteristics of Electrochemically Modified Carbon Fibers in Phosphoric Acid Solution: Effect of Surface Treatment on Interfacial Mechanical Behaviors of Composites. | 1.1 | 1 | Citations (PDF) |
| 952 | Thermal stability and mechanical behavior of cycloaliphatic-DGEBA epoxy blend system initiated by cationic latent catalyst | 2.7 | 40 | Citations (PDF) |
| 953 | Studies on the Surface Free Energy of Carbon–Carbon Composites: Effect of Filler Addition on the ILSS of Composites | 9.9 | 37 | Citations (PDF) |
| 954 | Studies on Surface Free Energy of an Anhydride–Epoxy Cured System: Effect of Side Alkenyl Chain Length of Hardener on Tensile and Impact Properties | 9.9 | 14 | Citations (PDF) |
| 955 | Effect of Fiber–Polymer Interactions on Fracture Toughness Behavior of Carbon Fiber-Reinforced Epoxy Matrix Composites | 9.9 | 96 | Citations (PDF) |
| 956 | Role of Chemically Modified Carbon Black Surfaces in Enhancing Interfacial Adhesion between Carbon Black and Rubber in a Composite System | 9.9 | 68 | Citations (PDF) |
| 957 | Cure behavior of diglycidylether of bisphenol A/trimethylolpropane triglycidylether epoxy blends initiated by thermal latent catalyst | 2.6 | 56 | Citations (PDF) |
| 958 | Isothermal cure kinetics of epoxy/phenol-novolac resin blend system initiated by cationic latent thermal catalyst | 2.3 | 52 | Citations (PDF) |
| 959 | Effect of anti-oxidative filler on the interfacial mechanical properties of carbon–carbon composites measured at high temperature | 10.7 | 77 | Citations (PDF) |
| 960 | Chiral separation of homocysteine by derivatization with 4-aminosulfonyl-7-fluoro-2,1,3-benzoxadiazole followed by capillary electrophoresis using γ-cyclodextrin | 3.7 | 26 | Citations (PDF) |
| 961 | Cure and reaction kinetics of an anhydride-cured epoxy resin catalyzed byN-benzylpyrazinium salts using near-infrared spectroscopy | 3.4 | 22 | Citations (PDF) |
| 962 | Title is missing! | 3.4 | 118 | Citations (PDF) |
| 963 | Title is missing! | 3.4 | 83 | Citations (PDF) |
| 964 | Title is missing! | 3.4 | 21 | Citations (PDF) |
| 965 | Determination of Sulfite in Oriental Herbal Medicines | 1.7 | 8 | Citations (PDF) |
| 966 | Influence of silane coupling agents on the surface energetics of glass fibers and mechanical interfacial properties of glass fiber-reinforced composites | 3.3 | 61 | Citations (PDF) |
| 967 | Effect of wavelength shift on PLC-type WDM directional coupler by UV irradiation | 1.8 | 5 | Citations (PDF) |
| 968 | Roles of Unsaturated Polyester in the Epoxy Matrix System | 2.5 | 55 | Citations (PDF) |
| 969 | Electrochemical treatment on activated carbon fibers for increasing the amount and rate of Cr(VI) adsorption | 10.7 | 74 | Citations (PDF) |
| 970 | Influence of molybdenum disilicide filler on carbon–carbon composites | 10.7 | 14 | Citations (PDF) |
| 971 | Title is missing! | 1.0 | 2 | Citations (PDF) |
| 972 | Title is missing! | 1.0 | 53 | Citations (PDF) |
| 973 | Title is missing! | 1.0 | 10 | Citations (PDF) |
| 974 | Adsorption Behaviors of CO2and NH3on Chemically Surface-Treated Activated Carbons | 9.9 | 100 | Citations (PDF) |
| 975 | XPS Analysis of Carbon Fiber Surfaces—Anodized and Interfacial Effects in Fiber–Epoxy Composites | 9.9 | 79 | Citations (PDF) |
| 976 | Removal of NO over Copper Supported on Activated Carbon Prepared by Electroless Plating | 9.9 | 20 | Citations (PDF) |
| 977 | Influence of Anodic Surface Treatment of Activated Carbon on Adsorption and Ion Exchange Properties | 9.9 | 14 | Citations (PDF) |
| 978 | Dispersive Stabilization of Liquid Crystal-in-Water with Acrylamide Copolymer/Surfactant Mixture: Nematic Curvilinear Aligned Phase Composite Film | 9.9 | 10 | Citations (PDF) |
| 979 | Effect of electrochemical treatment on pull-out properties of 73/27 HBA/HNA copolyester fibers in thermosetting matrix | 2.7 | 7 | Citations (PDF) |
| 980 | Title is missing! | 3.4 | 37 | Citations (PDF) |
| 981 | Stabilization of Liquid Crystal-in-Water Dispersion with Polymer/Surfactant Mixture: Nematic Curvilinear Aligned Phase Composite Film | 9.9 | 28 | Citations (PDF) |
| 982 | Evaluation of the Distribution Function of Adsorption Site Energies Based on the Fermi–Dirac's Law in a Monolayer | 9.9 | 30 | Citations (PDF) |
| 983 | Anodic Surface Treatment on Carbon Fibers: Determination of Acid-Base Interaction Parameter between Two Unidentical Solid Surfaces in a Composite System | 9.9 | 85 | Citations (PDF) |
| 984 | Effects of N-Benzylpyrazinium Hexafluoroantimonate Concentration on Rheological Properties in Cationic Epoxy Cure System | 2.5 | 40 | Citations (PDF) |
| 985 | London Dispersive Component of the Surface Free Energy and Surface Enthalpy | 9.9 | 67 | Citations (PDF) |
| 986 | The effect of electrochemical surface treatments of carbon fibers using scanning tunneling microscopy | 3.3 | 12 | Citations (PDF) |
| 987 | Surface characteristics of pitch-based carbon fibers by inverse gas chromatography method | 10.7 | 76 | Citations (PDF) |
| 988 | Role of Copper Nanoparticles in the Thermal and Mechanical Properties of Expanded Graphite-Reinforced Epoxy Hybrids | 4.2 | 5 | Citations (PDF) |
| 989 | Multifactorial predicting of conductivity in polymer nanocomposites with graphene: Insights into imperfect interphase conduction | 4.9 | 2 | Citations (PDF) |
| 990 | Hierarchically Porous Heteroatom‐co‐Doped Carbons for Enhanced Carbon Dioxide Capture | 13.9 | 11 | Citations (PDF) |
| 991 | Impact of pore structure in pitch-based activated carbon fibers on Cr(VI) adsorption behaviors | 7.7 | 1 | Citations (PDF) |
| 992 | Impacts of nanodiamond size and interphase depth on the tensile modulus of polymer composites | 4.8 | 3 | Citations (PDF) |
| 993 | Nanodiamond agglomeration in polymer composites: A practical model predicting the tensile modulus | 6.1 | 1 | Citations (PDF) |
| 994 | Engineering inorganic perovskite solar cells: overcoming efficiency and stability barriers for next-generation photovoltaics | 13.0 | 6 | Citations (PDF) |
| 995 | New insights to effective carbon nanofiber features due to defective interphase for prediction of tunneling conductivity in composites | 3.4 | 9 | Citations (PDF) |
| 996 | Unraveling the roles of network and tunnels in the conductivity of carbon nanofiber composites | 3.4 | 10 | Citations (PDF) |
| 997 | Sustainable nanoarchitectonics of cellulose-derived spherical activated carbon for efficient uremic toxin removal in pharmaceutical applications | 6.9 | 0 | Citations (PDF) |
| 998 | Simultaneous reduction and functionalization of graphene oxide for high-performance EMI shielding polyurethane composites | 3.7 | 1 | Citations (PDF) |
| 999 | Carbon nanostructures for photocatalytic degradation of organic pollutants: Synthesis strategies and functionalization techniques | 24.7 | 2 | Citations (PDF) |
| 1000 | Interfacial stress transfer and nanoparticle size as key factors in the strength of hydroxyapatite-polymer dental nanocomposites | 3.7 | 1 | Citations (PDF) |
| 1001 | Modeling of Tunneling Distance Among Nearby Carbon Nanofibers to Control the Tunneling Resistance and Electrical Conductivity of Composites | 4.9 | 0 | Citations (PDF) |
| 1002 | Interpreting of effective interphase depth in carbon nanofiber polymer composites by the amount of conduction transferring via an incomplete interphase: A unique method to optimize the charge transferring | 8.1 | 1 | Citations (PDF) |
| 1003 | From Structure to Performance: Exploring MOF‐Based Electrolytes for Enhanced Sodium‐Ion Battery Conductivity | 24.5 | 7 | Citations (PDF) |
| 1004 | Hemp fiber and its bio-composites: a short review part II—applications and life cycle assessment | 19.8 | 6 | Citations (PDF) |
| 1005 | Hydroxyapatite-based coatings for corrosion resistance and self-healing in biomedical and industrial applications | 9.3 | 4 | Citations (PDF) |
| 1006 | Estimating of contact area among carbon nanofibers in nanocomposites by the features of network, tunnel and interphase | 3.4 | 5 | Citations (PDF) |
| 1007 | Scalable Interfacial Design of CNT/MXene Hybrid Yarns for Durable and Flexible Supercapacitors | 11.5 | 7 | Citations (PDF) |
| 1008 | Analysis of tunneling conductivity for MXene polymer system by the network of interphase: parametric examinations and experimental validation | 3.4 | 4 | Citations (PDF) |
| 1009 | A comprehensive review of next-generation alginate derivatives for eco-friendly corrosion resistance and biofouling prevention | 19.8 | 3 | Citations (PDF) |
| 1010 | Unraveling of electrical conductivity for nanocomposites containing carbon black: a new insight into tunneling resistance | 3.4 | 3 | Citations (PDF) |
| 1011 | Ni/Cu co-doping engineered TiO2 for efficient solar-light-driven photocatalytic water treatment | 3.2 | 2 | Citations (PDF) |
| 1012 | Analysis of an incomplete interphase in carbon nanofiber polymer composites: A new approach for conductivity improvement | 4.8 | 0 | Citations (PDF) |
| 1013 | Bridging EDLC and pseudocapacitive mechanisms through materials design: recent advances in supercapacitor electrodes | 12.3 | 25 | Citations (PDF) |
| 1014 | Biomass‐Derived Carbon Photocatalysts for Organic Pollutant Degradation: Strategies and Perspectives | 10.5 | 7 | Citations (PDF) |
| 1015 | Thermal management with graphene–epoxy composites: Design strategies and emerging applications | 10.7 | 2 | Citations (PDF) |
| 1016 | Contact diameter in polymer carbon black nanocomposites by interfacial tension, network portion, interphase depth and tunneling distance | 6.1 | 0 | Citations (PDF) |
| 1017 | Emerging Roles of Inorganic and Copper Chalcogenide‐Based Hole Transport Materials in Perovskite Solar Cells | 4.5 | 0 | Citations (PDF) |
| 1018 | Structure-interface engineering-driven high-performance bidirectional thermally conductive Graphene/PBO composite films for lithium-ion battery thermal management | 8.7 | 3 | Citations (PDF) |
| 1019 | London Dispersion and Acido-Basicity of Ni-Rich Cathode Materials Using Inverse Gas Chromatography at Infinite Dilution | 4.6 | 0 | Citations (PDF) |
| 1020 | Raman Spectroelectrochemistry for Batteries: Real-Time Insights into Electrochemical Processes | 15.3 | 0 | Citations (PDF) |
| 1021 | Predicting the effective depth of a defective interphase in carbon nanofiber polymer system to estimate the percolation onset and electrical conductivity | 6.1 | 0 | Citations (PDF) |
| 1022 | Flexible Ag@graphene/polyimide film for electrothermal, photothermal, and EMI shielding | 4.8 | 0 | Citations (PDF) |
| 1023 | Pitch‐Based Hierarchical Carbons Coupled With NiO Nanosheets for High‐Energy and Durable Asymmetric Supercapacitors | 4.5 | 0 | Citations (PDF) |
| 1024 | Multifunctional MXene/epoxy nanocomposites: a comprehensive review of properties, modifications, and applications | 8.1 | 0 | Citations (PDF) |
| 1025 | Multiscale Modeling and Analysis of Muscle Tissue: A Finite Element Approach for 3D Braided Composite Structures | 3.3 | 0 | Citations (PDF) |
| 1026 | Recent advances in activated carbon for indoor air purification: Mechanistic insights, surface engineering, and sustainable regeneration | 3.2 | 0 | Citations (PDF) |
| 1027 | Influence of cellulose nanocrystal network on the Young’s modulus of polymer composites | 4.4 | 0 | Citations (PDF) |
