| 1 | Effects of hydrogen on the evolution of 4130 steel microstructure as a result of tensile loading | 6.6 | 3 | Citations (PDF) |
| 2 | Solid solution dependence of the deformation behavior in Mg–xZn (x = 0, 1, 2 wt%) alloys: In-situ neutron diffraction and crystal plasticity modeling | 10.0 | 7 | Citations (PDF) |
| 3 | Neutron diffraction analysis of residual stress distribution in the lubricant-free TR-AFSD AA7075 repair coupled with SPH simulations | 1.7 | 8 | Citations (PDF) |
| 4 | Quasi-reversibility of TWIP and TRIP of Fe-17Mn steel during low cycle fatigue | 5.4 | 5 | Citations (PDF) |
| 5 | Critical review on the adsorption of taste and odor compounds by activated carbon: Influencing factors, modifications methods, mechanism | 8.7 | 18 | Citations (PDF) |
| 6 | Relative phase stability of L12 and DO22/DO23 structures in Al3Nb, Al3Zr and Al3V compounds | 3.8 | 4 | Citations (PDF) |
| 7 | Energy absorption of architectured PrintCast interpenetrating composites in tension | 2.1 | 0 | Citations (PDF) |
| 8 | Lattice misfit design and characterisation in BCC superalloys | 4.3 | 15 | Citations (PDF) |
| 9 | Understanding the effect of cycling lithium-ion pouch cells under stress using neutron diffraction | 6.2 | 11 | Citations (PDF) |
| 10 | Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders | 5.6 | 62 | Citations (PDF) |
| 11 | An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance | 7.6 | 77 | Citations (PDF) |
| 12 | Low cycle fatigue performances of Al0.3CoCrFeNi high entropy alloys: In situ neutron diffraction studies on the precipitation effects | 3.8 | 14 | Citations (PDF) |
| 13 | An isotropic zero thermal expansion alloy with super-high toughness | 11.0 | 39 | Citations (PDF) |
| 14 | Real-time evolution of texture and temperature during friction stir processing of a magnesium alloy: An operando neutron diffraction study | 7.6 | 18 | Citations (PDF) |
| 15 | Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys | 2.4 | 6 | Citations (PDF) |
| 16 | Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations | 4.3 | 13 | Citations (PDF) |
| 17 | Probing the fatigue enhancement in a thermally aged cast duplex stainless steel by in situ neutron diffraction | 4.3 | 6 | Citations (PDF) |
| 18 | Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer | 0.9 | 3 | Citations (PDF) |
| 19 | Martensite Formation and Dynamic Recrystallization in Cold Sprayed SS304L | 2.2 | 6 | Citations (PDF) |
| 20 | A Portable Miniature Cryogenic Environment for In Situ Neutron Diffraction | 1.8 | 0 | Citations (PDF) |
| 21 | Enhancing the fatigue resistance of high and medium entropy alloys by manufacturing-driven microstructural developments | 2.1 | 3 | Citations (PDF) |
| 22 | The 650 °C Tensile Deformation of Graded IN718-René41 Superalloy Fabricated by Laser Blown-Powder Directed Energy Deposition | 1.8 | 3 | Citations (PDF) |
| 23 | Understanding the High-Temperature Deformation Behaviors in Additively Manufactured Al6061+TiC Composites via In Situ Neutron Diffraction | 1.8 | 4 | Citations (PDF) |
| 24 | Understanding Why SrCo0.9Ta0.1O3−δ is a Better Perovskite Oxygen Electrocatalyst than BaCo0.9Ta0.1O3−δ | 2.4 | 5 | Citations (PDF) |
| 25 | Variations in γ′ formers and refractory elements for enhanced creep resistance and phase stability of an advanced Ni-based superalloy | 3.8 | 10 | Citations (PDF) |
| 26 | Precipitation-strengthened micromechanical behaviors of magnesium alloy under cyclic loading | 10.0 | 3 | Citations (PDF) |
| 27 | Multi-stage load partitioning in additively manufactured Al6061+TiC nanocomposite characterized by in-situ neutron diffraction | 2.1 | 1 | Citations (PDF) |
| 28 | Long- and short-range orders in 10-component compositionally complex ceramics | 8.0 | 15 | Citations (PDF) |
| 29 | Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy | 7.6 | 47 | Citations (PDF) |
| 30 | Triggering reversible anion redox chemistry in O3-type cathodes by tuning Na/Mn anti-site defects | 22.6 | 96 | Citations (PDF) |
| 31 | Identifying the effect of coherent precipitates on the deformation mechanisms by in situ neutron diffraction in an extruded magnesium alloy under low-cycle fatigue conditions | 7.6 | 16 | Citations (PDF) |
| 32 | Micromechanical origin for the wide range of strength-ductility trade-off in metastable high entropy alloys† | 4.3 | 24 | Citations (PDF) |
| 33 | Adaptive sampling for accelerating neutron diffraction-based strain mapping
* | 2.1 | 5 | Citations (PDF) |
| 34 | Neutron diffraction probing hydrogen in monoclinic H2VOPO4 | 1.8 | 1 | Citations (PDF) |
| 35 | Reducing Co/O Band Overlap through Spin State Modulation for Stabilized High Capability of 4.6 V LiCoO2 | 12.1 | 57 | Citations (PDF) |
| 36 | Superior zero thermal expansion dual-phase alloy via boron-migration mediated solid-state reaction | 11.0 | 25 | Citations (PDF) |
| 37 | Deciphering the multiple deformation mechanisms responsible for sustained work hardening in a FeCrCoNi medium entropy alloy | 10.9 | 36 | Citations (PDF) |
| 38 | On the residual stress relaxation in Inconel 718 superalloys at high temperature by real-time neutron diffraction | 5.4 | 28 | Citations (PDF) |
| 39 | γ′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction | 4.3 | 20 | Citations (PDF) |
| 40 | Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy | 7.6 | 98 | Citations (PDF) |
| 41 | Operando neutron diffraction reveals mechanisms for controlled strain evolution in 3D printing | 11.0 | 40 | Citations (PDF) |
| 42 | Effects of mechanical deformation on dislocation density and phase partitioning in 4130 steel | 5.4 | 7 | Citations (PDF) |
| 43 | Atomic faulting induced exceptional cryogenic strain hardening in gradient cell–structured alloy | 26.5 | 179 | Citations (PDF) |
| 44 | Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy | 5.4 | 32 | Citations (PDF) |
| 45 | Unraveling transition-metal-mediated stability of spinel oxide via in situ neutron scattering | 12.5 | 11 | Citations (PDF) |
| 46 | Microstructure and tensile behavior of powder metallurgy FeCrAl accident tolerant fuel cladding | 2.5 | 35 | Citations (PDF) |
| 47 | Transient Phase-Driven Cyclic Deformation in Additively Manufactured 15-5 PH Steel | 2.1 | 5 | Citations (PDF) |
| 48 | Crystallographic orientation and spatially resolved damage for polycrystalline deformation of a high manganese steel | 7.6 | 14 | Citations (PDF) |
| 49 | On the torsional and coupled torsion-tension/compression behavior of magnesium alloy solid rod: A crystal plasticity evaluation | 10.9 | 52 | Citations (PDF) |
| 50 | Modular assembly of electron transfer pathways in bimetallic MOFs for photocatalytic ammonia synthesis | 2.9 | 29 | Citations (PDF) |
| 51 | Multi-stepwise charge transfer via MOF@MOF/TiO2 dual-heterojunction photocatalysts towards hydrogen evolution | 6.8 | 74 | Citations (PDF) |
| 52 | Improving the oxygen redox reversibility of Li-rich battery cathode materials via Coulombic repulsive interactions strategy | 11.0 | 285 | Citations (PDF) |
| 53 | Two-dimensional zero thermal expansion in low-cost MnxFe5−xSi3 alloys via integrating crystallographic texture and magneto-volume effect | 5.1 | 16 | Citations (PDF) |
| 54 | In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation | 5.4 | 7 | Citations (PDF) |
| 55 | Temperature and stress dependent twinning behavior in a fully austenitic medium-Mn steel | 7.6 | 52 | Citations (PDF) |
| 56 | Discovery of a reversible redox-induced order-disorder transition in a 10-component compositionally complex ceramic | 4.3 | 15 | Citations (PDF) |
| 57 | Anomalous high-temperature quasi-linear superelasticity of Ni-Fe-Ga-Co shape memory alloy | 4.9 | 8 | Citations (PDF) |
| 58 | Stabilizing the Anionic Redox in 4.6 V LiCoO2 Cathode through Adjusting Oxygen Magnetic Moment | 12.0 | 40 | Citations (PDF) |
| 59 | MENUS—Materials engineering by neutron scattering | 1.1 | 7 | Citations (PDF) |
| 60 | Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion | 5.4 | 24 | Citations (PDF) |
| 61 | Bioinspired construction of g-C3N4 isotype heterojunction on carbonized poly(tannic acid) nanorod surface with multistep electron transfer path | 3.5 | 7 | Citations (PDF) |
| 62 | Elastic behavior of binary and ternary refractory multi-principal-element alloys | 5.4 | 39 | Citations (PDF) |
| 63 | Chemical and structural evolutions of Li–Mn-rich layered electrodes at different current densities | 22.6 | 50 | Citations (PDF) |
| 64 | A Seawater‐Corrosion‐Resistant and Isotropic Zero Thermal Expansion (Zr,Ta)(Fe,Co)2 Alloy | 17.7 | 39 | Citations (PDF) |
| 65 | Unraveling dislocation-type evolution dominated strain hardening in laminated Ti/Nb composites | 5.4 | 14 | Citations (PDF) |
| 66 | Microstructure and deformation mechanism of Si-strengthened intercritically annealed quenching and partitioning steels | 4.2 | 18 | Citations (PDF) |
| 67 | Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing | 31.3 | 732 | Citations (PDF) |
| 68 | Overcoming brittleness of high volume fraction Al/SiCp composites by controlling interface characteristics | 5.4 | 28 | Citations (PDF) |
| 69 | Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms | 4.8 | 42 | Citations (PDF) |
| 70 | Micromechanical aspects of deformation and failure of advanced Iron-Chromium-Aluminum alloys | 1.9 | 4 | Citations (PDF) |
| 71 | Experimental and Modeling Study of Phase-Specific Flow Stress Distribution in Intercritically Annealed Quenching and Partitioning Steels | 1.8 | 2 | Citations (PDF) |
| 72 | Quantitative texture analysis at the WAND2 and HIDRA diffractometers | 1.7 | 1 | Citations (PDF) |
| 73 | Fatigue Behavior and Mechanisms of High-Entropy Alloys | 2.1 | 13 | Citations (PDF) |
| 74 | Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects | 11.0 | 94 | Citations (PDF) |
| 75 | Residual stress and microstructure in IN718-René41 graded superalloy fabricated by laser blown directed energy deposition | 1.4 | 7 | Citations (PDF) |
| 76 | Exploring Gradient Pathways in High Temperature, Functionally Graded Alloys | 0.0 | 1 | Citations (PDF) |
| 77 | Unravelling thermal history during additive manufacturing of martensitic stainless steel | 4.9 | 55 | Citations (PDF) |
| 78 | Lean duplex TRIP steel: Role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning | 1.9 | 32 | Citations (PDF) |
| 79 | Microstructure, Hardness, and Residual Stress of the Dissimilar Metal Weldments of SA508-309L/308L-304L | 1.7 | 24 | Citations (PDF) |
| 80 | Design and Optimization of the Direct Recycling of Spent Li-Ion Battery Cathode Materials | 5.4 | 216 | Citations (PDF) |
| 81 | In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions | 5.4 | 20 | Citations (PDF) |
| 82 | Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy | 11.0 | 228 | Citations (PDF) |
| 83 | Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy | 31.3 | 345 | Citations (PDF) |
| 84 | High-throughput design of high-performance lightweight high-entropy alloys | 11.0 | 314 | Citations (PDF) |
| 85 | Viscoplastic lattice strain during repeated relaxation of age-hardened Al alloy | 2.8 | 18 | Citations (PDF) |
| 86 | Boosting Nitrogen Activation via Bimetallic Organic Frameworks for Photocatalytic Ammonia Synthesis | 10.0 | 167 | Citations (PDF) |
| 87 | Direct evidence of the stacking fault-mediated strain hardening phenomenon | 2.4 | 35 | Citations (PDF) |
| 88 | Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite | 11.0 | 58 | Citations (PDF) |
| 89 | Strength can be controlled by edge dislocations in refractory high-entropy alloys | 11.0 | 221 | Citations (PDF) |
| 90 | Nitrogenase-inspired bimetallic metal organic frameworks for visible-light-driven nitrogen fixation | 14.9 | 128 | Citations (PDF) |
| 91 | Investigating Mechano-Electrochemical Coupling Phenomenon in Lithium-Ion Pouch Cells Using In-situ Neutron Diffraction | 0.5 | 1 | Citations (PDF) |
| 92 | Monitoring residual strain relaxation and preferred grain orientation of additively manufactured Inconel 625 by in-situ neutron imaging | 2.1 | 15 | Citations (PDF) |
| 93 | Bioinspired construction of carbonized poly(tannic acid)/g-C3N4 nanorod photocatalysts for organics degradation | 5.1 | 27 | Citations (PDF) |
| 94 | Pyrimidine-modified g-C3N4 nanosheets for enhanced photocatalytic H2 evolution | 4.6 | 17 | Citations (PDF) |
| 95 | Mapping of Texture and Phase Fractions in Heterogeneous Stress States during Multiaxial Loading of Biomedical Superelastic NiTi | 17.7 | 8 | Citations (PDF) |
| 96 | Influence of Volume Fraction of Long-Period Stacking Ordered Structure Phase on the Deformation Processes during Cyclic Deformation of Mg-Y-Zn Alloys | 1.8 | 14 | Citations (PDF) |
| 97 | Creep properties of advanced austenitic steel 709 determined through short experiments under in-situ neutron diffraction followed by TEM characterization | 4.2 | 4 | Citations (PDF) |
| 98 | Magnetic ordering suppressed phase transformation of a TRIP-HEA during thermal cycling | 2.4 | 2 | Citations (PDF) |
| 99 | Superior High‐Temperature Strength in a Supersaturated Refractory High‐Entropy Alloy | 17.7 | 272 | Citations (PDF) |
| 100 | Investigating Mechano-Electrochemical Coupling Phenomenon in Lithium-Ion Pouch Cells Using In-situ Neutron Diffraction | 0.0 | 0 | Citations (PDF) |
| 101 | VULCAN: A “hammer” for high-temperature materials research | 3.6 | 82 | Citations (PDF) |
| 102 | Micromechanical and microstructure analysis of strain-induced phenomena in ultrasonic additively-manufactured Al-6061 alloy | 5.4 | 15 | Citations (PDF) |
| 103 | On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy | 4.3 | 20 | Citations (PDF) |
| 104 | Investigating the deformation mechanisms of a highly metastable high entropy alloy using in-situ neutron diffraction | 1.5 | 32 | Citations (PDF) |
| 105 | The anomalous staircase-like magnetization behavior and giant magnetocaloric effect in a Fe–Mn-Ga magnetic shape memory alloy | 3.8 | 6 | Citations (PDF) |
| 106 | Biomimetic synthesis of 2D/2D mixed graphitic carbon nitride /carbonized polydopamine nanosheets with excellent photocatalytic performance | 3.7 | 23 | Citations (PDF) |
| 107 | Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy | 17.7 | 294 | Citations (PDF) |
| 108 | Tuning Both Anionic and Cationic Redox Chemistry of Li-Rich Li1.2Mn0.6Ni0.2O2 via a “Three-in-One” Strategy | 4.8 | 46 | Citations (PDF) |
| 109 | High performance and low thermal expansion in Er-Fe-V-Mo dual-phase alloys | 7.6 | 38 | Citations (PDF) |
| 110 | A disordered rock salt anode for fast-charging lithium-ion batteries | 31.3 | 546 | Citations (PDF) |
| 111 | Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy | 8.2 | 230 | Citations (PDF) |
| 112 | A high-pressure flow through test vessel for neutron imaging and neutron diffraction-based strain measurement of geological materials | 1.1 | 3 | Citations (PDF) |
| 113 | Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction | 2.7 | 35 | Citations (PDF) |
| 114 | Bioinspired Construction of g-C3N4 Nanolayers on a Carbonized Polydopamine Nanosphere Surface with Excellent Photocatalytic Performance | 3.0 | 13 | Citations (PDF) |
| 115 | Nitrogenase-inspired mixed-valence MIL-53(FeII/FeIII) for photocatalytic nitrogen fixation | 8.7 | 174 | Citations (PDF) |
| 116 | Size effect in stainless steel thin wires under tension | 5.4 | 14 | Citations (PDF) |
| 117 | Synthesis of high-efficient g-C3N4/polydopamine/CdS nanophotocatalyst based on bioinspired adhesion and chelation | 4.6 | 27 | Citations (PDF) |
| 118 | In Situ Neutron Diffraction Study of Phase Transformation of High Mn Steel with Different Carbon Content | 1.8 | 6 | Citations (PDF) |
| 119 | In situ construction of hydrazone-linked COF-based core–shell hetero-frameworks for enhanced photocatalytic hydrogen evolution | 6.8 | 163 | Citations (PDF) |
| 120 | The effect of oxygen vacancy and spinel phase integration on both anionic and cationic redox in Li-rich cathode materials | 6.8 | 166 | Citations (PDF) |
| 121 | Synthesis and catalytic performance of polydopamine supported metal nanoparticles | 2.7 | 53 | Citations (PDF) |
| 122 | One-pot fabrication of porous nitrogen-deficient g-C3N4 with superior photocatalytic performance | 3.5 | 24 | Citations (PDF) |
| 123 | Recognition of V3+/V4+/V5+ Multielectron Reactions in Na3V(PO4)2: A Potential High Energy Density Cathode for Sodium-Ion Batteries | 3.2 | 16 | Citations (PDF) |
| 124 | Effect of nickel on the kinematic stability of retained austenite in carburized bearing steels – In-situ neutron diffraction and crystal plasticity modeling of uniaxial tension tests in AISI 8620, 4320 and 3310 steels | 10.9 | 38 | Citations (PDF) |
| 125 | Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy | 7.6 | 51 | Citations (PDF) |
| 126 | Operando measurement of lattice strain in internal combustion engine components by neutron diffraction | 5.3 | 10 | Citations (PDF) |
| 127 | Element Effects on High-Entropy Alloy Vacancy and Heterogeneous Lattice Distortion Subjected to Quasi-equilibrium Heating | 2.7 | 34 | Citations (PDF) |
| 128 | First-principles and machine learning predictions of elasticity in severely lattice-distorted high-entropy alloys with experimental validation | 7.6 | 190 | Citations (PDF) |
| 129 | Neutron transmission simulation of texture in polycrystalline materials | 1.1 | 13 | Citations (PDF) |
| 130 | Elucidating the Limit of Li Insertion into the Spinel Li4Ti5O12 2019, 1, 96-102 | | 79 | Citations (PDF) |
| 131 | Novel Ordered Rocksalt-Type Lithium-Rich Li2Ru1–xNixO3−δ (0.3 ≤ x ≤ 0.5) Cathode Material with Tunable Anionic Redox Potential | 3.9 | 24 | Citations (PDF) |
| 132 | Investigating the Difference in Mechanical Stability of Retained Austenite in Bainitic and Martensitic High-Carbon Bearing Steels using in situ Neutron Diffraction and Crystal Plasticity Modeling | 1.8 | 8 | Citations (PDF) |
| 133 | Hardening steels by the generation of transient phase using additive manufacturing | 3.8 | 23 | Citations (PDF) |
| 134 | Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries | 6.2 | 133 | Citations (PDF) |
| 135 | Transformation-reinforced high-entropy alloys with superior mechanical properties via tailoring stacking fault energy | 4.9 | 175 | Citations (PDF) |
| 136 | In situ investigation of stress-induced martensitic transformation in granular shape memory ceramic packings | 7.6 | 29 | Citations (PDF) |
| 137 | Elucidating the mobility of H+and Li+ions in (Li6.25−xHxAl0.25)La3Zr2O12viacorrelative neutron and electron spectroscopy | 22.6 | 74 | Citations (PDF) |
| 138 | Solving the strength-ductility tradeoff in the medium-entropy NiCoCr alloy via interstitial strengthening of carbon | 3.8 | 125 | Citations (PDF) |
| 139 | Multiscale mechanical fatigue damage of stainless steel investigated by neutron diffraction and X-ray microdiffraction | 7.6 | 26 | Citations (PDF) |
| 140 | In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel | 4.3 | 35 | Citations (PDF) |
| 141 | Applying neutron transmission physics and 3D statistical full-field model to understand 2D Bragg-edge imaging | 1.6 | 11 | Citations (PDF) |
| 142 | Crystal Structure and Transport Properties of Oxygen-Deficient Perovskite Sr0.9Y0.1CoO3−δ | 3.9 | 9 | Citations (PDF) |
| 143 | Identifying the chemical and structural irreversibility in LiNi0.8Co0.15Al0.05O2 – a model compound for classical layered intercalation | 6.8 | 57 | Citations (PDF) |
| 144 | Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial‐Free Steel | 1.3 | 15 | Citations (PDF) |
| 145 | Determination of γ/γ′ Lattice Misfit in Ni-Based Single-Crystal Superalloys at High Temperatures by Neutron Diffraction | 1.7 | 62 | Citations (PDF) |
| 146 | Probing the electrolyte infiltration behaviour of activated carbon supercapacitor electrodes by in situ neutron scattering using aqueous NaCl as electrolyte | 8.7 | 30 | Citations (PDF) |
| 147 | Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6−δ for Solid Oxide Fuel Cells | 16.6 | 87 | Citations (PDF) |
| 148 | In-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in bearing steels | 5.4 | 19 | Citations (PDF) |
| 149 | Distinct Recrystallization Pathways in a Cold-Rolled Al-2%Mg Alloy Evidenced by In-Situ Neutron Diffraction | 0.9 | 6 | Citations (PDF) |
| 150 | RHEGAL: Resistive heating gas enclosure loadframe for in situ neutron scattering | 1.1 | 6 | Citations (PDF) |
| 151 | Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes | 31.3 | 1,745 | Citations (PDF) |
| 152 | Tracing Phase Transformation and Lattice Evolution in a TRIP Sheet Steel under High-Temperature Annealing by Real-Time In Situ Neutron Diffraction | 1.8 | 14 | Citations (PDF) |
| 153 | Time and frequency dependent mechanical properties of LaCoO3-based perovskites: Neutron diffraction and domain mobility | 1.6 | 3 | Citations (PDF) |
| 154 | A suite-level review of the neutron powder diffraction instruments at Oak Ridge National Laboratory | 1.1 | 135 | Citations (PDF) |
| 155 | Understanding Structure–Activity Relationships in Sr1–xYxCoO3−δ through in Situ Neutron Diffraction and Electrochemical Measurements | 5.5 | 6 | Citations (PDF) |
| 156 | Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na3SbS4 at Extremely Low Temperatures | 3.9 | 29 | Citations (PDF) |
| 157 | Transition from the twinning induced plasticity to the γ-ε transformation induced plasticity in a high manganese steel | 7.6 | 29 | Citations (PDF) |
| 158 | Bending Behavior of a Wrought Magnesium Alloy Investigated by the In Situ Pinhole Neutron Diffraction Method | 1.8 | 8 | Citations (PDF) |
| 159 | Lattice distortion in a strong and ductile refractory high-entropy alloy | 7.6 | 612 | Citations (PDF) |
| 160 | An in situ neutron diffraction study of plastic deformation in a Cu46.5Zr46.5Al7 bulk metallic glass composite | 4.3 | 22 | Citations (PDF) |
| 161 | Simultaneous Operando Measurements of the Local Temperature, State of Charge, and Strain inside a Commercial Lithium-Ion Battery Pouch Cell | 2.3 | 64 | Citations (PDF) |
| 162 | In situ neutron diffraction study on tensile deformation behavior of carbon-strengthened CoCrFeMnNi high-entropy alloys at room and elevated temperatures | 1.9 | 10 | Citations (PDF) |
| 163 | Event-based processing of neutron scattering data at the Spallation Neutron Source | 1.7 | 47 | Citations (PDF) |
| 164 | Real-Time In Situ Neutron Diffraction Investigation of Phase-Specific Load Sharing in a Cold-Rolled TRIP Sheet Steel | 1.3 | 26 | Citations (PDF) |
| 165 | PIND: High spatial resolution by pinhole neutron diffraction | 2.4 | 10 | Citations (PDF) |
| 166 | Structure Evolution and Thermoelectric Properties of Carbonized Polydopamine Thin Films | 5.5 | 103 | Citations (PDF) |
| 167 | Effect of external stress on deuteride (hydride) precipitation in Zircaloy-4 using in situ neutron diffraction | 2.5 | 11 | Citations (PDF) |
| 168 | NaAlTi3O8, A Novel Anode Material for Sodium Ion Battery | 2.7 | 19 | Citations (PDF) |
| 169 | In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel | 4.3 | 32 | Citations (PDF) |
| 170 | Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature | 5.4 | 67 | Citations (PDF) |
| 171 | Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering | 17.7 | 672 | Citations (PDF) |
| 172 | Deformation characteristics of the intermetallic alloy 60NiTi | 3.8 | 74 | Citations (PDF) |
| 173 | Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys | 5.4 | 144 | Citations (PDF) |
| 174 | A study of stress-induced phase transformation and micromechanical behavior of CuZr-based alloy by in-situ neutron diffraction | 4.9 | 23 | Citations (PDF) |
| 175 | Kinetic characteristics up to 4.8 V of layered LiNi1/3Co1/3Mn1/3O2 cathode materials for high voltage lithium-ion batteries | 4.2 | 43 | Citations (PDF) |
| 176 | Enhancing the Ion Transport in LiMn1.5Ni0.5O4 by Altering the Particle Wulff Shape via Anisotropic Surface Segregation | 5.5 | 47 | Citations (PDF) |
| 177 | Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing | 5.4 | 146 | Citations (PDF) |
| 178 | A Combined Variable-Temperature Neutron Diffraction and Thermogravimetric Analysis Study on a Promising Oxygen Electrode, SrCo0.9Nb0.1O3−δ, for Reversible Solid Oxide Fuel Cells | 5.5 | 22 | Citations (PDF) |
| 179 | High performance aluminum–cerium alloys for high-temperature applications | 8.5 | 288 | Citations (PDF) |
| 180 | Martensitic transformation in a B2-containing CuZr-based BMG composite revealed by in situ neutron diffraction | 4.9 | 21 | Citations (PDF) |
| 181 | Lattice‐Cell Orientation Disorder in Complex Spinel Oxides | 16.6 | 29 | Citations (PDF) |
| 182 | In-situ TOF neutron diffraction studies of cyclic softening in superelasticity of a NiFeGaCo shape memory alloy | 5.4 | 14 | Citations (PDF) |
| 183 | Transformation-induced plasticity in bulk metallic glass composites evidenced by in-situ neutron diffraction | 7.6 | 116 | Citations (PDF) |
| 184 | In-situ Neutron Diffraction Analysis of Crystal Plasticity of Retained Austenite in Bearing Steel | 1.3 | 5 | Citations (PDF) |
| 185 | Characterization of Crystallographic Structures Using Bragg-Edge Neutron Imaging at the Spallation Neutron Source | 2.1 | 43 | Citations (PDF) |
| 186 | An Air‐Stable Na3SbS4 Superionic Conductor Prepared by a Rapid and Economic Synthetic Procedure | 0.9 | 65 | Citations (PDF) |
| 187 | An Air‐Stable Na3SbS4 Superionic Conductor Prepared by a Rapid and Economic Synthetic Procedure | 11.7 | 245 | Citations (PDF) |
| 188 | Operando Lithium Dynamics in the Li‐Rich Layered Oxide Cathode Material via Neutron Diffraction | 16.6 | 131 | Citations (PDF) |
| 189 | Electrostatic levitation facility optimized for neutron diffraction studies of high temperature liquids at a spallation neutron source | 1.1 | 28 | Citations (PDF) |
| 190 | In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material | 2.4 | 9 | Citations (PDF) |
| 191 | α-Phase transformation kinetics of U – 8 wt% Mo established by in situ neutron diffraction | 2.5 | 20 | Citations (PDF) |
| 192 | Annealing effects on the structural and magnetic properties of off-stoichiometric Fe-Mn-Ga ferromagnetic shape memory alloys | 5.4 | 20 | Citations (PDF) |
| 193 | Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys | 7.6 | 68 | Citations (PDF) |
| 194 | Deformation mode transition of Mg 3Li alloy: An in situ neutron diffraction study | 4.9 | 8 | Citations (PDF) |
| 195 | Probing Multiscale Transport and Inhomogeneity in a Lithium-Ion Pouch Cell Using In Situ Neutron Methods | 12.6 | 62 | Citations (PDF) |
| 196 | Gas–solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries | 11.0 | 710 | Citations (PDF) |
| 197 | High-resolution 2-D Bragg diffraction reveal heterogeneous domain transformation behavior in a bulk relaxor ferroelectric | 2.4 | 2 | Citations (PDF) |
| 198 | Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction | 4.9 | 123 | Citations (PDF) |
| 199 | Investigation of deformation twinning under complex stress states in a rolled magnesium alloy | 4.9 | 35 | Citations (PDF) |
| 200 | Phase-specific deformation behavior of a NiAl–Cr(Mo) lamellar composite under thermal and mechanical loads | 4.9 | 28 | Citations (PDF) |
| 201 | Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting | 7.6 | 68 | Citations (PDF) |
| 202 | A precipitation-hardened high-entropy alloy with outstanding tensile properties | 7.6 | 2,800 | Citations (PDF) |
| 203 | Understanding low-cycle fatigue life improvement mechanisms in a pre-twinned magnesium alloy | 4.9 | 43 | Citations (PDF) |
| 204 | In Situ Neutron Scattering Study of Nanostructured PbTe-PbS Bulk Thermoelectric Material | 1.9 | 5 | Citations (PDF) |
| 205 | Correlation of anisotropy and directional conduction in β-Li3PS4 fast Li+ conductor | 2.4 | 29 | Citations (PDF) |
| 206 | A study of lattice elasticity from low entropy metals to medium and high entropy alloys | 4.3 | 60 | Citations (PDF) |
| 207 | Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction | 7.6 | 52 | Citations (PDF) |
| 208 | Origin of High Li+ Conduction in Doped Li7La3Zr2O12 Garnets | 4.8 | 138 | Citations (PDF) |
| 209 | Microwave plasma reactor with conical-reflector for diamond deposition | 3.2 | 49 | Citations (PDF) |
| 210 | The migration mechanism of transition metal ions in LiNi0.5Mn1.5O4 | 6.8 | 26 | Citations (PDF) |
| 211 | A High‐Temperature Neutron Diffraction Study of Nb
2
AlC and TiNbAlC | 3.2 | 16 | Citations (PDF) |
| 212 | A study of suppressed formation of low-conductivity phases in doped Li7La3Zr2O12 garnets by in situ neutron diffraction | 6.8 | 88 | Citations (PDF) |
| 213 | Understanding the Role of NH4F and Al2O3 Surface Co-modification on Lithium-Excess Layered Oxide Li1.2Ni0.2Mn0.6O2 | 5.5 | 96 | Citations (PDF) |
| 214 | Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures | 7.6 | 76 | Citations (PDF) |
| 215 | Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer | 1.1 | 9 | Citations (PDF) |
| 216 | In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. II. Elastic properties | 1.6 | 13 | Citations (PDF) |
| 217 | Mechanical properties and microstructure changes of proton exchange membrane under immersed conditions | 2.4 | 18 | Citations (PDF) |
| 218 | In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. I. Crystal structure analysis and texture development | 1.6 | 13 | Citations (PDF) |
| 219 | Measurement of Interface Thermal Resistance With Neutron Diffraction | 0.5 | 4 | Citations (PDF) |
| 220 | Deformation behavior of solid-solution-strengthened Mg–9 wt.% Al alloy: In situ neutron diffraction and elastic–viscoplastic self-consistent modeling | 7.6 | 62 | Citations (PDF) |
| 221 | Novel Chemically Stable Ba3Ca1.18Nb1.82–xYxO9−δ Proton Conductor: Improved Proton Conductivity through Tailored Cation Ordering | 4.8 | 48 | Citations (PDF) |
| 222 | Spin excitations in cubic maghemite nanoparticles studied by time-of-flight neutron spectroscopy | 2.5 | 10 | Citations (PDF) |
| 223 | Releasing Metal Catalysts via Phase Transition: (NiO)0.05-(SrTi0.8Nb0.2O3)0.95 as a Redox Stable Anode Material for Solid Oxide Fuel Cells | 5.5 | 42 | Citations (PDF) |
| 224 | Investigation of deformation dynamics in a wrought magnesium alloy | 10.9 | 78 | Citations (PDF) |
| 225 | Revealing the cyclic hardening mechanism of an austenitic stainless steel by real-time in situ neutron diffraction | 4.3 | 49 | Citations (PDF) |
| 226 | An In-Situ Electrochemical Cell for Neutron Diffraction Studies of Phase Transitions in Small Volume Electrodes of Li-Ion Batteries | 2.3 | 70 | Citations (PDF) |
| 227 | A high-conduction Ge substituted Li3AsS4 solid electrolyte with exceptional low activation energy | 6.8 | 74 | Citations (PDF) |
| 228 | Phase-specific deformation behavior of a relatively tough NiAl–Cr(Mo) lamellar composite | 4.3 | 38 | Citations (PDF) |
| 229 | Extracting grain-orientation-dependent data fromin situtime-of-flight neutron diffraction. I. Inverse pole figures | 1.7 | 17 | Citations (PDF) |
| 230 | Visualizing the Structural Evolution of LSM/xYSZ Composite Cathodes for SOFC by in-situ Neutron Diffraction | 2.7 | 37 | Citations (PDF) |
| 231 | Study of Average and Local Structures of Variedly Ordered LiNi0.5Mn1.5O4 By Neutron Diffraction | 0.0 | 0 | Citations (PDF) |
| 232 | Characterization and analyses of degradation and recovery of LaNi4.78Sn0.22 hydrides following thermal aging | 4.9 | 14 | Citations (PDF) |
| 233 | In-situ neutron diffraction study of the xLi2MnO3·(1 − x)LiMO2 (x = 0, 0.5; M = Ni, Mn, Co) layered oxide compounds during electrochemical cycling | 6.2 | 87 | Citations (PDF) |
| 234 | On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion | 4.3 | 98 | Citations (PDF) |
| 235 | Deformation dynamics study of a wrought magnesium alloy by real-time in situ neutron diffraction | 4.3 | 39 | Citations (PDF) |
| 236 | Origin of high piezoelectric response in A-site disordered morphotropic phase boundary composition of lead-free piezoelectric 0.93(Na0.5Bi0.5)TiO3–0.07BaTiO3 | 1.6 | 81 | Citations (PDF) |
| 237 | In-situ observation of inhomogeneous degradation in large format Li-ion cells by neutron diffraction | 6.2 | 117 | Citations (PDF) |
| 238 | Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime | 4.3 | 66 | Citations (PDF) |
| 239 | Unraveling structural evolution of LiNi0.5Mn1.5O4 by in situ neutron diffraction | 6.8 | 66 | Citations (PDF) |
| 240 | Grain orientation dependence of lattice strains and intergranular damage rates in polycrystals under cyclic loading | 4.3 | 15 | Citations (PDF) |
| 241 | A portable hydro-thermo-mechanical loading cell for in situ small angle neutron scattering studies of proton exchange membranes | 1.1 | 4 | Citations (PDF) |
| 242 | Neutron Characterization for Additive Manufacturing | 0.0 | 11 | Citations (PDF) |
| 243 | Polarized neutron diffraction at a spallation source for magnetic studies | 1.7 | 3 | Citations (PDF) |
| 244 | Probing Li-Ni Cation Disorder in Li1−xNi1+x−yAlyO2Cathode Materials by Neutron Diffraction | 2.3 | 45 | Citations (PDF) |
| 245 | Visualizing the chemistry and structure dynamics in lithium-ion batteries by in-situ neutron diffraction | 2.7 | 160 | Citations (PDF) |
| 246 | In situ neutron diffraction analysis of grain structure during friction stir processing of an aluminum alloy | 1.8 | 11 | Citations (PDF) |
| 247 | Unusual thermal stability of nano-structured ferritic alloys | 4.9 | 34 | Citations (PDF) |
| 248 | A synchrotron X-ray diffraction study on the phase transformation kinetics and texture evolution of a TRIP steel subjected to torsional loading | 7.6 | 50 | Citations (PDF) |
| 249 | Strain incompatibility and residual strains in ferroelectric single crystals | 2.7 | 11 | Citations (PDF) |
| 250 | Enhanced piezoelectricity and nature of electric-field induced structural phase transformation in textured lead-free piezoelectric Na0.5Bi0.5TiO3-BaTiO3 ceramics | 2.4 | 83 | Citations (PDF) |
| 251 | Understanding of Phase Formation, Thermal Stability, and Decomposition of Cathode Material LiNi0.5Mn1.5O4 in Oxygen-Deficient and Air Conditions by In Situ Neutron Diffraction | 0.0 | 0 | Citations (PDF) |
| 252 | Structural modulations and magnetic properties of off-stoichiometric Ni-Mn-Ga magnetic shape memory alloys | 2.5 | 36 | Citations (PDF) |
| 253 | Micromechanical characterization of casting-induced inhomogeneity in an Al0.8CoCrCuFeNi high-entropy alloy | 4.3 | 77 | Citations (PDF) |
| 254 | In situ neutron diffraction study of twin reorientation and pseudoplastic strain in Ni–Mn–Ga single crystals | 4.3 | 12 | Citations (PDF) |
| 255 | Radial distribution of martensitic phase transformation in a metastable stainless steel under torsional deformation: A synchrotron X-ray diffraction study | 1.8 | 10 | Citations (PDF) |
| 256 | Texture Evolution and Phase Transformation in Titanium Investigated by In-Situ Neutron Diffraction | 1.7 | 14 | Citations (PDF) |
| 257 | A study on fatigue crack growth behavior subjected to a single tensile overload: Part II. Transfer of stress concentration and its role in overload-induced transient crack growth | 7.6 | 44 | Citations (PDF) |
| 258 | From embryos to precipitates: A study of nucleation and growth in a multicomponent ferritic steel | 2.5 | 43 | Citations (PDF) |
| 259 | Evolution of residual-strain distribution through an overload-induced retardation period during fatigue-crack growth | 1.6 | 11 | Citations (PDF) |
| 260 | In situ neutron diffraction studies of a commercial, soft lead zirconate titanate ceramic: response to electric fields and mechanical stress | 2.1 | 26 | Citations (PDF) |
| 261 | In-situ neutron diffraction study of phase stress evolutions in a Ni-based porous anode solid oxide fuel cells under uniaxial load | 2.1 | 5 | Citations (PDF) |
| 262 | Mechanical behavior of Fe75Mo5P10C7.5B2.5 bulk-metallic glass under torsional loading | 5.4 | 6 | Citations (PDF) |
| 263 | In Situ Neutron Diffraction Measurement of Li-Ion Batteries under Charge and Discharge at VULCAN | 0.0 | 0 | Citations (PDF) |
| 264 | Neutron Diffraction Measurement of Residual Stresses in Friction Stir Processed Nanocomposite Surface Layer | 2.3 | 8 | Citations (PDF) |
| 265 | In situneutron diffraction measurements of temperature and stresses during friction stir welding of 6061-T6 aluminium alloy | 1.8 | 82 | Citations (PDF) |
| 266 | NRSF2 load frame: design, control, and testing | 0.5 | 6 | Citations (PDF) |
| 267 | Durability of (Pr0.7Sr0.3)MnO3±δ/8YSZ composite cathodes for solid oxide fuel cells | 6.2 | 10 | Citations (PDF) |
| 268 | Changes in lattice-strain profiles around a fatigue crack through the retardation period after overloading | 2.2 | 10 | Citations (PDF) |
| 269 | In situ neutron diffraction measurement of transient temperature and stress fields in a thin plate | 2.4 | 21 | Citations (PDF) |
| 270 | Comparison of Methodologies for Determination of Fracture Strength of 8mol% Yttria-Stabilized Zirconia Electrolyte Materials | 0.8 | 8 | Citations (PDF) |
| 271 | Mechanics of composite materials in fuel cell systems | 0.9 | 4 | Citations (PDF) |
| 272 | A Multiphysics Modeling Study of (Pr0.7Sr0.3)MnO3±δ∕8mol% Yttria-Stabilized Zirconia Composite Cathodes for Solid Oxide Fuel Cells | 0.8 | 5 | Citations (PDF) |
| 273 | Low‐cycle fatigue of 1Cr–18Ni–9Ti stainless steel and related weld metal under axial, torsional and 90° out‐of‐phase loading | 2.3 | 70 | Citations (PDF) |
| 274 | Title is missing! | 2.8 | 25 | Citations (PDF) |
| 275 | What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries? | 12.6 | 237 | Citations (PDF) |
| 276 | The Neutronic Engine: A Platform for Operando Neutron Diffraction in
Internal Combustion Engines | 0.0 | 0 | Citations (PDF) |
| 277 | Unraveling Materials Synthesis Mechanisms Using In Situ Transmission Electron Microscopy and Neutron Scattering | 43.1 | 5 | Citations (PDF) |
| 278 | Quantifying Dislocation Density and Recrystallization Kinetics in Laser-Heated Cold Sprayed SS304L | 2.2 | 2 | Citations (PDF) |
| 279 | What Is the Limit of Quantification for the Minor Phase in Time-of-Flight Neutron Diffraction? A Case Study on Fe and Ni Powder Mixtures at VULCAN | 1.8 | 1 | Citations (PDF) |
| 280 | Study on Evolution Laws of Lining Mechanical Behavior in Mountain Tunnels Under Heavy Rainfall Conditions | 2.0 | 1 | Citations (PDF) |
| 281 | Mechanical properties and strengthening mechanisms of cold sprayed Al-Mg alloys | 5.4 | 4 | Citations (PDF) |
| 282 | Residual stress distribution in an additively manufactured complex structure by neutron diffraction measurement | 1.8 | 3 | Citations (PDF) |
| 283 | High-Temperature Neutron Diffraction Study of Vanadium and Vanadium–Niobium Null-Matrix Alloy for Spectrum Normalization 0, 3, 4668-4682 | | 0 | Citations (PDF) |
| 284 | A Compact Cryogenic Environment for In Situ Neutron Diffraction Under Mechanical Loading | 0.9 | 2 | Citations (PDF) |
| 285 | Fast and Accurate Pixel Calibration of Tof Neutron Diffractometers with Machine Learning | 0.9 | 0 | Citations (PDF) |
| 286 | A Smart Vision-Aided RICH (Robotic Interface Control and Handling) System for VULCAN | 0.8 | 0 | Citations (PDF) |
| 287 | Infrared triggered dwell and active cooling thermal control effects on microstructural uniformity in DED | 2.1 | 0 | Citations (PDF) |
| 288 | Enhancement of mechanical properties in CoCrNi medium entropy alloy via ultra-cryoforging microstructural engineering | 4.9 | 1 | Citations (PDF) |
| 289 | Elevated-temperature stress-relaxation behavior of age-hardened AA7075 | 2.8 | 1 | Citations (PDF) |
| 290 | Strength, ductility and zero thermal expansion in multicomponent TRIP-Invar alloys | 5.6 | 2 | Citations (PDF) |
| 291 | A compact
in situ
polarized 3He neutron spin filter for the diffractometer VULCAN at the Spallation Neutron Source | 1.1 | 0 | Citations (PDF) |
| 292 | Deformation mechanism transition from TRIP/TWIP to BCC stabilization in Mo-containing Ti-Zr-Hf-Ta refractory multi-principal element alloys | 4.9 | 0 | Citations (PDF) |
