| 1 | Computation- and process-based design for advanced structural high-entropy alloy development and analyses: A critical review | 35.6 | 20 | Citations (PDF) |
| 2 | Regulation of cryogenic mechanical behaviors of C-added non-equiatomic CoCrFeNiMo ferrous medium-entropy alloy via control of initial microstructure | 13.6 | 16 | Citations (PDF) |
| 3 | Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact | 13.6 | 9 | Citations (PDF) |
| 4 | Higher entropy-induced strengthening in mechanical property of Cantor alloys/Zr-3 joints by laser in-situ eutectic high-entropy transformation | 13.6 | 11 | Citations (PDF) |
| 5 | Restructuring the cell network of non-equiatomic CoCrFeNiMoC medium-entropy alloy fabricated by laser powder bed fusion | 13.6 | 15 | Citations (PDF) |
| 6 | Enhancement on mechanical properties via phase separation induced by Cu-added high-entropy alloy fillers in metastable ferrous medium-entropy alloy welds | 6.0 | 6 | Citations (PDF) |
| 7 | Cryogenic deformation strengthening mechanisms in FeMnSiNiAl high-entropy alloys | 8.7 | 30 | Citations (PDF) |
| 8 | Improving the mechanical properties of high-entropy alloys via germanium addition: A focused review | 6.0 | 15 | Citations (PDF) |
| 9 | Microstructure evolution and mechanical properties of CoCrFeMnNi HEA-MXene composites prepared by spark plasma sintering | 6.0 | 20 | Citations (PDF) |
| 10 | Alloy design and microstructure of AlxMoV medium-entropy alloys | 6.0 | 5 | Citations (PDF) |
| 11 | Diffusion bonding of TC4/TB8 titanium alloys with an interlayer by regulating temperature: Microstructure and mechanical performance | 5.8 | 10 | Citations (PDF) |
| 12 | Effect of laser surface treatment on microstructural evolution and mechanical properties of a Co–Cr–Fe–Ni–Mo medium–entropy alloy | 6.3 | 10 | Citations (PDF) |
| 13 | Electron-beam induced Mn oxidation in TEM: Insights into the heating effect of Auger excitation | 2.2 | 3 | Citations (PDF) |
| 14 | Cellular structure assisted enhanced deformation-induced martensitic transformation in laser-directed energy deposited ferrous medium-entropy alloy | 6.3 | 8 | Citations (PDF) |
| 15 | Gas tungsten arc welding of CoCrFeMnNi high entropy alloy to 316 stainless steel | 6.3 | 13 | Citations (PDF) |
| 16 | The effect of some late 3d transition metals additions to a Fe–Mn–Al–C alloy on the development of high-entropy alloys | 4.7 | 7 | Citations (PDF) |
| 17 | Promoting strength–ductility synergy by mitigating heterogeneity in precipitation-strengthened FCC/B2 dual-phase high-entropy alloy | 11.1 | 67 | Citations (PDF) |
| 18 | Excellent strength and thermal expansion behavior of Invar alloy fabricated by in-situ rolling-assisted laser directed energy deposition | 6.3 | 5 | Citations (PDF) |
| 19 | Excellent strength/ductility synergy by optimization of post-weld heat treatment for gas metal arc welded CoCrFeMnNi high entropy alloys with 410 stainless filler wire: High-throughput thermodynamic modelling with experimental validation | 6.9 | 9 | Citations (PDF) |
| 20 | Partial dynamic recrystallization promotes deformation twinning in double-strengthened high-entropy alloys | 6.3 | 2 | Citations (PDF) |
| 21 | Enhancing hydrogen storage kinetics and capacity via particle size modulation in TiZrCrFeMnNi high-entropy alloy | 9.0 | 19 | Citations (PDF) |
| 22 | Bulging of grain boundaries and core-shell dislocation structures enhance mechanical properties of equiatomic high-entropy alloys | 11.1 | 14 | Citations (PDF) |
| 23 | Strategic enhancement of CoCrFeMnNi high-entropy alloy mechanical properties through a high-strength nano-scale nitride layer without geometrical or tolerance constraints | 11.1 | 20 | Citations (PDF) |
| 24 | Elucidating the effects of interrupted loading on the stretch-flangeability of DP980 steel | 6.3 | 4 | Citations (PDF) |
| 25 | Interpretable and physics-informed modeling of solidification in alloy systems: A generalized framework for multi-component prediction | 8.7 | 14 | Citations (PDF) |
| 26 | Significant improvement of strain hardening through massive interfaces in heterogeneous lamellar structured complex-concentrated alloys | 6.1 | 2 | Citations (PDF) |
| 27 | Activating metastability engineering via control of initial microstructure in C-added CoCrFeNiMo medium-entropy alloy: in situ X-ray diffraction study | 6.3 | 4 | Citations (PDF) |
| 28 | Realizing improved strain aging capability in bake-hardenable steel | 6.3 | 3 | Citations (PDF) |
| 29 | Mechanical behavior of gradient nanotwinned Cu: A dislocation-based constitutive model incorporating gradient effects | 6.3 | 12 | Citations (PDF) |
| 30 | Temperature-dependent deformation behavior of dual-phase medium-entropy alloy: In-situ neutron diffraction study | 13.6 | 8 | Citations (PDF) |
| 31 | Complex deformation behavior of a partially recrystallized metastable medium-entropy alloy: In-situ synchrotron X-ray diffraction study | 8.7 | 10 | Citations (PDF) |
| 32 | Mitigating the adverse effect of grain refinement on the ductility of a metastable high-entropy alloy towards superior strength-ductility synergy | 3.8 | 2 | Citations (PDF) |
| 33 | Active learning framework to optimize process parameters for additive-manufactured Ti-6Al-4V with high strength and ductility | 13.7 | 39 | Citations (PDF) |
| 34 | Microstructure heterogeneity, mechanical properties and thermal conductivity of pure copper fabricated by metal material extrusion additive manufacturing process | 6.3 | 17 | Citations (PDF) |
| 35 | How the hard domains behave in hetero-deformation: In-situ synchrotron X-ray diffraction study with finite element method simulation | 6.3 | 5 | Citations (PDF) |
| 36 | Anisotropic characterization of wire-arc additive manufacturing Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy: Influence of texture and microstructure | 6.3 | 10 | Citations (PDF) |
| 37 | Exploring the impact of hard-to-soft domain ratios in a heterostructured multi-principal element alloy | 6.3 | 5 | Citations (PDF) |
| 38 | Thermomechanical behavior and microstructural evolution in nodes and struts of face-centered cubic lattice structures during laser powder bed fusion processing | 6.0 | 5 | Citations (PDF) |
| 39 | Unveiling the macrosegregation formation mechanism and its impact on properties in dissimilar welding between CoCrFeMnNi high-entropy alloy and 316 stainless steel | 3.4 | 5 | Citations (PDF) |
| 40 | Investigation on formability and fracture mechanisms of dissimilar DC05/AA5052 sheets in an integrated friction stir-assisted double-sided incremental synchronous forming-bonding process | 6.7 | 6 | Citations (PDF) |
| 41 | Recent Progress in Developing Creep-Resistant Mg-Gd-Based Alloys | 3.3 | 5 | Citations (PDF) |
| 42 | A Novel Framework for Evaluating the Intrinsic Mechanical Properties of Sheet Metals Using Two-dimensional Digital Image Correlation | 3.3 | 4 | Citations (PDF) |
| 43 | Prototyping of nuclear fuel assembly parts by laser powder bed fusion of Inconel 718 | 3.0 | 5 | Citations (PDF) |
| 44 | High-temperature oxidation characteristics and microstructural transformation of multicomponent alloy coatings | 6.0 | 3 | Citations (PDF) |
| 45 | Substitutional silicon content effect on the structural/mechanical modification of metastable triplex high entropy alloys | 13.6 | 6 | Citations (PDF) |
| 46 | Impact of defects on high cycle fatigue life in wire-arc additive manufactured TC17 alloy | 5.0 | 9 | Citations (PDF) |
| 47 | Multi-scale design of deformation mechanisms at hetero-zone boundaries: Dual HDI strengthening driven by TRIP effect | 13.6 | 17 | Citations (PDF) |
| 48 | Realizing high thermoelectric performance through the synergistic control of intrinsic conduction and enhanced phonon scattering in Cu-doped Bi0.5Sb1.5Te3 alloys | 6.2 | 8 | Citations (PDF) |
| 49 | Microstructure and mechanical properties of pre-homogenized high-Mn steel processed by equal-channel angular pressing | 2.2 | 1 | Citations (PDF) |
| 50 | Influence of hierarchical microstructure on mechanical properties in sintered CoCrFeMnNi high-entropy alloy fabricated by ultrasonic nanocrystalline surface modification | 6.3 | 6 | Citations (PDF) |
| 51 | The effect of laser surface treatment for cellular structure-induced metastability in ferrous medium-entropy alloy | 6.1 | 3 | Citations (PDF) |
| 52 | Architecting heterostructures in multilayered titanium laminates to attain 1 GPa yield stress with uncompromised ductility at 500 °C | 11.2 | 10 | Citations (PDF) |
| 53 | Sigma phase formation and chemical short-range ordering during the isochronal annealing of a metastable medium-entropy alloy | 13.6 | 11 | Citations (PDF) |
| 54 | Crack mitigation at interface between Inconel 718 and stainless steel 316L during directed energy deposition under N2 atmosphere | 6.1 | 6 | Citations (PDF) |
| 55 | Improvement in corrosion and wear resistance of Ni3Al-based superalloy coatings through laser energy density regulation | 6.1 | 4 | Citations (PDF) |
| 56 | Multiple Phase Transition Induced Enhancement of Low-Temperature Thermoelectric Power in Ductile AgCuS-Based Thin Films | 8.0 | 2 | Citations (PDF) |
| 57 | Stretch-Flangeability of Laser Powder Bed Fusion-Processed 316L Stainless Steel | 0.4 | 0 | Citations (PDF) |
| 58 | Insights into strain delocalization and plasticity in pre-deformed metastable dual-phase medium-entropy alloys | 6.3 | 6 | Citations (PDF) |
| 59 | High-Strength D2 tool steel via material extrusion additive manufacturing and post-heat treatment | 6.9 | 4 | Citations (PDF) |
| 60 | Microstructure evolution and local strengthening mechanisms in CoCrFeMnNi high entropy alloy joints reinforced with Inconel 625 | 6.3 | 3 | Citations (PDF) |
| 61 | Achieving balanced mechanical and thermal expansion properties of Invar alloy prepared by hybrid laser directed energy deposition and post-heat treatment | 6.1 | 6 | Citations (PDF) |
| 62 | First-principles and experimental investigations on the mechanical properties of Co particles modified Sn-1.0Ag-0.5Cu solder | 6.8 | 4 | Citations (PDF) |
| 63 | Leveraging microstructural design to enhance strain hardening in porous CoCrFeMnNi high-entropy alloy fabricated by material extrusion additive manufacturing | 6.3 | 6 | Citations (PDF) |
| 64 | Lüders band-assisted high uniform ductility in ultrastrong ferrous medium-entropy alloy via hierarchical microstructure | 11.1 | 12 | Citations (PDF) |
| 65 | Pure copper plate achieving high synergetic strength and electrical conductivity via a novel dynamic offsets and shear force adjustment cryorolling | 6.3 | 5 | Citations (PDF) |
| 66 | Engineering heterogeneous microstructure for enhancing mechanical properties of multicomponent alloys via powder metallurgy route | 6.3 | 3 | Citations (PDF) |
| 67 | Accelerated discovery and testing of Fe–Co–Cr–Ni–Mo ferrous medium-entropy alloys: advanced in-situ alloying via direct energy deposition | 6.1 | 2 | Citations (PDF) |
| 68 | Enhanced strength and electrical conductivity in pure copper via dynamic offsets and shear force adjustments cryorolling combining annealing | 6.9 | 4 | Citations (PDF) |
| 69 | Harnessing competitive interplay between precipitation and lattice distortion for strong and ductile medium-entropy alloy | 6.3 | 9 | Citations (PDF) |
| 70 | Exploring Fe–Mn–Al–C lightweight steels via in-situ alloying in direct energy deposition | 6.1 | 8 | Citations (PDF) |
| 71 | Microstructural evolution, strength-ductility synergy, and corrosion behavior of the UNS N08825 Ni-based superalloy/UNS S32750 super duplex stainless steel friction stir welds | 6.1 | 6 | Citations (PDF) |
| 72 | Computational exploration and experimental validation of reduced- multi-principal element alloys with stable BCC phases and superior mechanical properties | 2.9 | 1 | Citations (PDF) |
| 73 | Cooperative and competitive interactions on plastic deformation dynamics in gradient grained dual-phase heterostructures | 5.4 | 13 | Citations (PDF) |
| 74 | Activating TRIP via precipitation-induced matrix modification in Fe-based medium-entropy alloys | 6.3 | 2 | Citations (PDF) |
| 75 | Precipitation driven nano-twinning: Simultaneous enhancement of mechanical and electrical properties in Cu-Ni-Sn alloys | 5.4 | 12 | Citations (PDF) |
| 76 | Fabrication of robust high-aspect-ratio Ti-6Al-4V ultra-thin-walled structures using powder bed fusion with in-situ focused infrared heating | 3.3 | 2 | Citations (PDF) |
| 77 | Effect of horizontal magnetic field on the microstructure and mechanical properties of Ti nanoparticles-reinforced Sn1.0Ag0.5Cu solder: Experimental and first-principles calculations | 6.7 | 15 | Citations (PDF) |
| 78 | Neutron diffraction-assisted constitutive modeling of directed energy deposited CoCrFeMnNi high entropy alloy | 6.3 | 2 | Citations (PDF) |
| 79 | The microstructure-mechanical property relationships in Ti–Cu alloys for biomedical applications: A review | 6.1 | 9 | Citations (PDF) |
| 80 | Dislocation cell-mediated nanosized carbide precipitation enables ultrastrong AISI D2 tool steel fabricated via laser-powder bed fusion | 6.3 | 1 | Citations (PDF) |
| 81 | Twinning-assisted strengthening in a novel high entropy alloy via thermo-mechanical processing | 6.0 | 2 | Citations (PDF) |
| 82 | Effects of in-situ synthesized nitride and oxide precipitates on the room temperature and high temperature mechanical properties of laser powder bed fusion Fe-12Cr-6Al | 5.0 | 0 | Citations (PDF) |
| 83 | Mechanistic insights into deformation, load redistribution, and stress partitioning in high-strength dual-phase medium-entropy alloys | 6.3 | 3 | Citations (PDF) |
| 84 | Superb thermal stability and strength in Al/Ti/V-modified Ni-based high-entropy alloy via asymmetric cryo-rolling tailored hierarchical microstructures | 5.4 | 6 | Citations (PDF) |
| 85 | Enhanced mechanical responses and fatigue behaviors of triply periodic minimal surface lattice metamaterials by twin-oriented lattice design | 6.0 | 12 | Citations (PDF) |
| 86 | The effect of Ga on interfacial reactions and intermetallic evolution in SnBiGaIn quaternary alloys | 6.0 | 3 | Citations (PDF) |
| 87 | Spark plasma sintering of TiNiFeCoCux (X = 0, 0.2) dual-phase high entropy alloy: Microstructural, mechanical and tribological characteristics | 6.0 | 1 | Citations (PDF) |
| 88 | Distinct wrinkling behavior of metal-polymer-metal sandwich in the forming process: Total sheet wrinkling and surface wrinkling | 5.0 | 0 | Citations (PDF) |
| 89 | Understanding the performance improvement mechanism of Ti/steel clad plates fabricated by double-layered hot rolling | 6.1 | 7 | Citations (PDF) |
| 90 | Cryogenic Tensile Strength of 1.6 GPa in a Precipitation-Hardened (NiCoCr)99.25C0.75 Medium-Entropy Alloy Fabricated via Laser Powder Bed Fusion | 2.8 | 0 | Citations (PDF) |
| 91 | Development of 3D interconnected heterogeneous high-entropy alloy composites with enhanced multifunctionality via liquid metal dealloying | 6.1 | 5 | Citations (PDF) |
| 92 | Cryogenic deformation mechanisms in LPBF Hastelloy X: Effects of scanning strategy and post-heat treatment | 6.3 | 4 | Citations (PDF) |
| 93 | Dynamic strain aging behavior of Inconel 625 alloy processed via directed energy deposition | 6.3 | 3 | Citations (PDF) |
| 94 | Micro/nano scale Laves phases enhanced hydrogen trapping in as-cast high entropy alloy for hydrogen storage applications | 6.3 | 11 | Citations (PDF) |
| 95 | Precipitate evolution in an ultrahigh-strength, carbon-impurity-enhanced maraging steel manufactured via laser powder bed fusion | 8.7 | 8 | Citations (PDF) |
| 96 | Preventing microcracks between directed energy deposited Hastelloy X and IN792 substrate by adding IN625 buffer layer | 3.3 | 1 | Citations (PDF) |
| 97 | Analysis of Die Compaction of Chip Geometry through Porous Continuum Model‐Based Approach | 2.9 | 1 | Citations (PDF) |
| 98 | Impact of uneven distribution of grain characteristics on yield strength and martensitic transformation of as-hot-rolled medium-entropy alloys | 13.6 | 21 | Citations (PDF) |
| 99 | Lightweight Fe47Mn25Al13Cr7Ni5C3 medium-entropy alloy with enhanced mechanical properties | 6.3 | 3 | Citations (PDF) |
| 100 | Effect of Mo addition on the microstructure and high-specific tensile strength of Fe–Mn–Al–Ni–C ferrous medium-entropy alloy | 6.3 | 18 | Citations (PDF) |
| 101 | Mapping local atomic structure of metallic glasses using machine learning aided 4D-STEM | 8.7 | 19 | Citations (PDF) |
| 102 | Abnormal strain-hardening in Co-rich CoNiV medium-entropy alloys | 5.4 | 22 | Citations (PDF) |
| 103 | Texture adjustment approach of magnesium alloys via variable strain path calculated by an integrated finite element-viscoplastic self-consistent model | 13.6 | 20 | Citations (PDF) |
| 104 | Microstructure and properties of HEA fabricated through metal powder wire arc additive manufacturing | 2.5 | 6 | Citations (PDF) |
| 105 | Grain boundary strengthening in nanocrystalline Mo0.2CoNi medium-entropy alloys produced via high-pressure torsion | 4.4 | 7 | Citations (PDF) |
| 106 | Microstructure evolution and strengthening mechanism of CoCrFeMnNi HEA/Zr-3 brazed joints reinforced by fine-grained BCC HEA and HCP Zr | 13.6 | 35 | Citations (PDF) |
| 107 | Mechanical properties of lamellar-structured 18Ni300 maraging steel manufactured via directed energy deposition | 6.3 | 26 | Citations (PDF) |
| 108 | Evolution of Co2Nb Laves phase and deformation twins in novel CoCrFeNiCuNb eutectic high entropy alloy | 6.3 | 15 | Citations (PDF) |
| 109 | Microstructure and Mechanical Property of Zr/316L Brazed Joints by Zr–Cu–Fe Amorphous Filler | 3.3 | 4 | Citations (PDF) |
| 110 | Supreme tensile properties in precipitation-hardened 316L stainless steel fabricated through powder cold-consolidation and annealing | 6.3 | 16 | Citations (PDF) |
| 111 | A new finding on the benefits of heterostructured bake-hardenable steels: Enhanced strain aging ability | 6.3 | 7 | Citations (PDF) |
| 112 | Non‐Hetero‐Deformation‐Induced Hardening in Steel/Polymer/Steel Layered Sheet: Experiment and Modeling Analyses | 2.9 | 3 | Citations (PDF) |
| 113 | Promising elevated temperature mechanical properties of novel lightweight Fe47Mn25Al13Cr7Ni5C3 medium-entropy alloy | 6.3 | 9 | Citations (PDF) |
| 114 | Adaptive enhancement of apatite crystal orientation and Young's modulus under elevated load in rat ulnar cortical bone | 3.4 | 5 | Citations (PDF) |
| 115 | Effects of current density on the mechanical properties and microstructures of CoCrFeNiMn high-entropy alloy | 6.1 | 8 | Citations (PDF) |
| 116 | Enhancing thermal conductivity of 6061 Al plate via graphene dip coating | 6.1 | 13 | Citations (PDF) |
| 117 | Ultrastrong Nanocrystalline Inconel 718 Fabricated by Powder High‐Pressure Torsion and Annealing | 2.9 | 3 | Citations (PDF) |
| 118 | Leveraging a coarse yet strong matrix in L12-strengthened high-entropy alloy through simplified thermomechanical processing | 6.3 | 21 | Citations (PDF) |
| 119 | Maraging and reversion-driven passivation engineering of Fe68Ni10Mn10Co10Ti1.5Si0.5 medium entropy alloy | 6.0 | 4 | Citations (PDF) |
| 120 | Fabrication of spatially-variable heterostructured CoCrFeMnNi high entropy alloy by laser processing | 6.3 | 52 | Citations (PDF) |
| 121 | Activation of deformation twinning in ultrafine-grained high-entropy alloys via tailoring stacking fault energy and critical twinning stress | 6.3 | 10 | Citations (PDF) |
| 122 | Tailoring deformation-induced martensitic transformation through cellular engineering in laser powder bed fusion processed 316L stainless steel | 6.3 | 11 | Citations (PDF) |
| 123 | Crystal-to-amorphous phase transformation in ternary shape memory alloys | 4.7 | 5 | Citations (PDF) |
| 124 | Cryogenic Tensile Behavior of Ferrous Medium-entropy Alloy Additively Manufactured by Laser Powder Bed Fusion | 0.4 | 6 | Citations (PDF) |
| 125 | Integrating interfacial bonding and coordinated deformation in steel/Al bilayers via a pin-less friction stir-assisted synchronous joining-forming approach | 6.2 | 10 | Citations (PDF) |
| 126 | Discontinuous coarsening leads to unchanged tensile properties in high-entropy alloys with different recrystallization volume fractions | 11.1 | 90 | Citations (PDF) |
| 127 | Hydrogen trapping and micromechanical behavior in additively manufactured CoCrFeNi high-entropy alloy in as-built and pre-strained conditions | 8.7 | 17 | Citations (PDF) |
| 128 | Tailoring the strengthening mechanisms of high-entropy alloys toward excellent strength-ductility synergy by metalloid silicon alloying: A review | 35.6 | 128 | Citations (PDF) |
| 129 | Enhanced strength-ductility synergy in a gradient pseudo-precipitates heterostructured Al-2.5%Mg alloy: Design, fabrication, and deformation mechanism | 13.6 | 30 | Citations (PDF) |
| 130 | Body-centered cubic phase stability in cobalt-free refractory high-entropy alloys | 4.0 | 6 | Citations (PDF) |
| 131 | Effect of cell characteristics on mechanical properties of AlSi10Mg alloy fabricated by laser powder bed fusion | 6.3 | 15 | Citations (PDF) |
| 132 | Effects of lattice misfit of γ/γ′ phases on hydrogen embrittlement behavior in Ni-based single crystal superalloy | 6.1 | 24 | Citations (PDF) |
| 133 | Machine learning prediction and characterization of sigma-free high-entropy alloys | 5.0 | 25 | Citations (PDF) |
| 134 | Development and validation of large-scale gas gun experiment and its simulation for evaluating impact resistance of electronic equipment | 6.1 | 10 | Citations (PDF) |
| 135 | Synergistic effects of Monel 400 filler wire in gas metal arc welding of CoCrFeMnNi high entropy alloy | 6.9 | 36 | Citations (PDF) |
| 136 | Size matters: Exploring part size effects on microstructure, defects, and mechanical property in optimized laser powder bed fusion (L-PBF) additive manufacturing | 6.3 | 20 | Citations (PDF) |
| 137 | Foreword to the focus issue: advances in high entropy alloys | 6.2 | 3 | Citations (PDF) |
| 138 | Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusion | 3.3 | 7 | Citations (PDF) |
| 139 | Unveiling yield strength of metallic materials using physics-enhanced machine learning under diverse experimental conditions | 8.7 | 31 | Citations (PDF) |
| 140 | Overcoming strength-ductility trade-off in Si-containing transformation-induced plasticity high-entropy alloys via metastability engineering | 6.3 | 29 | Citations (PDF) |
| 141 | The evolution of microstructure and micro-texture in a metastable Fe45Co35Cr10V10 medium-entropy alloy subjected to cold rolling | 5.0 | 5 | Citations (PDF) |
| 142 | Effects of homogenization and deep cryogenic treatments on microstructure and mechanical property of D2 tool steel fabricated by laser direct energy deposition | 6.3 | 6 | Citations (PDF) |
| 143 | Surface heterostructuring of 316L stainless steel manufactured by laser powder bed fusion and hot isostatic pressing | 6.3 | 14 | Citations (PDF) |
| 144 | Modulated heating rate effect on optimizing sintered density and microstructure in CoCrFeMnNi high-entropy alloy fabricated through metal injection molding | 5.0 | 13 | Citations (PDF) |
| 145 | Enhancing impact resilience of thermal battery through honeycomb-structured aluminum buffering devices: Insights from large-scale gas-gun tests and simulations | 4.9 | 8 | Citations (PDF) |
| 146 | Enhanced strength of L12-strengthened (FeCoNi)79.5Cr10.5Al5Ti5 high-entropy alloy via Ta alloying and its refined strengthening mechanism model | 6.3 | 17 | Citations (PDF) |
| 147 | Tensile deformation behavior of a lightweight AlZnCu medium-entropy alloy | 6.1 | 2 | Citations (PDF) |
| 148 | Crystallographic orientation dependence of hydrogen-induced cracks in single-crystalline CrCoNi medium-entropy alloy | 6.1 | 2 | Citations (PDF) |
| 149 | Lattice destabilization in electron-beam-irradiated antimony in TEM | 5.0 | 4 | Citations (PDF) |
| 150 | Development of aluminum matrix composites through accumulative roll bonding: a review | 3.4 | 29 | Citations (PDF) |
| 151 | Dual-gradient structure induced spreadable phase transformation for simultaneously improving strength and ductility | 8.7 | 35 | Citations (PDF) |
| 152 | Heterostructuring of BN-CoCrFeMnNi high-entropy alloy via severe plastic deformation | 6.3 | 4 | Citations (PDF) |
| 153 | Characterization of the Manufacturing Process and Mechanical Properties of CoCrFeMnNi High-Entropy Alloys via Metal Injection Molding and Hot Isostatic Pressing | 0.4 | 1 | Citations (PDF) |
| 154 | Periodic spinodal decomposition in double–strengthened medium–entropy alloy | 13.7 | 41 | Citations (PDF) |
| 155 | Deformation-induced martensitic transformations: A strategy for overcoming the strength-ductility trade-off in high-entropy alloys | 12.3 | 28 | Citations (PDF) |
| 156 | Role of carbon on the enhanced strength-ductility synergy in a high-entropy alloy by multiple synergistic strategies | 6.0 | 9 | Citations (PDF) |
| 157 | From soft to ultrahard over 1000 HV: Engineering the hardness of FeMnAl(Cu) medium entropy alloys by unlocking the potential of β-Mn precipitation | 8.7 | 17 | Citations (PDF) |
| 158 | Deformation-induced multi-step TRIP/TWIP(fcc, hcp) behaviors in metastable Fe55Mn25Co10Cr10 high-entropy alloy at ambient and cryogenic temperatures | 6.3 | 17 | Citations (PDF) |
| 159 | Stochastic nature of incipient plasticity in a body-centered cubic medium-entropy alloy | 8.7 | 9 | Citations (PDF) |
| 160 | Effects of deformation-induced BCC martensitic transformation on uniaxial ductility and biaxial stretchability in metastable ferrous medium-entropy alloys | 6.3 | 3 | Citations (PDF) |
| 161 | Designing cobalt-free face-centered cubic high-entropy alloys: A strategy using d-orbital energy level | 4.4 | 21 | Citations (PDF) |
| 162 | Role of Direct Quenching and Partitioning Processes in Improving Austenite Stability and Stretch Flangeability in a Low C Steel | 3.3 | 6 | Citations (PDF) |
| 163 | Electroplasticity mechanism of Ti2AlNb alloys under hot compression with the application of a lower electric current | 6.3 | 12 | Citations (PDF) |
| 164 | Cryogenic tensile behavior of CoNiCrMo medium entropy alloy | 6.0 | 1 | Citations (PDF) |
| 165 | Repairability and effectiveness in direct energy deposition of 316L stainless steel grooves: A comparative study on varying laser strategy | 6.1 | 17 | Citations (PDF) |
| 166 | A machine learning approach for predicting evaporation-induced composition variability in directed energy deposition in-situ alloying | 3.3 | 0 | Citations (PDF) |
| 167 | Microstructure, hardness, and tribological properties of Ni-Co/ SiO2 nanocomposite coating produced through pulsed current electrodeposition | 5.4 | 16 | Citations (PDF) |
| 168 | Deformation-induced martensitic transformation kinetics in TRIP-assisted steels and high-entropy alloys | 8.7 | 58 | Citations (PDF) |
| 169 | Understanding the creep behaviors and mechanisms of Mg-Gd-Zn alloys via machine learning | 11.3 | 21 | Citations (PDF) |
| 170 | Remarkable mechanical properties at room and cryogenic temperatures in a metastable high-entropy system through BCC and HCP martensitic transformations | 6.3 | 21 | Citations (PDF) |
| 171 | Shear deformation behavior of additively manufactured 316L stainless steel lattice structures | 3.3 | 5 | Citations (PDF) |
| 172 | Architectured heterogeneous structure of brittle Co60.6Ni19.5V19.6N0.3 medium-entropy alloy for the strength-ductility improvement | 6.3 | 5 | Citations (PDF) |
| 173 | Hierarchical ferrous medium entropy with heterogeneous precipitates embedded in core-shell grain structure for superior mechanical properties | 8.7 | 23 | Citations (PDF) |
| 174 | Remarkable Cryogenic Strength and Ductility of AISI 904L Superaustenitic Stainless Steel: A Comparative Study | 2.1 | 14 | Citations (PDF) |
| 175 | Simultaneous enhancement of strength and ductility of Al matrix composites enabled by submicron-sized high-entropy alloy phases | 6.1 | 6 | Citations (PDF) |
| 176 | Failure Behavior of Steel-Polymer-Steel Multi-Material Clad: Mechanical Performance and Microstructure Evolution | 3.3 | 6 | Citations (PDF) |
| 177 | Microstructure and mechanical property of Zr-3/CoCrFeMnNi high-entropy alloys joints brazed using a novel Zr Cu alloys | 5.0 | 3 | Citations (PDF) |
| 178 | Multiscale plastic deformation in additively manufactured FeCoCrNiMo high-entropy alloys to achieve strength–ductility synergy at elevated temperatures | 11.1 | 102 | Citations (PDF) |
| 179 | Effect of Cryorolling on Strengthening–Softening Transition in Deformation Twinned Cupronickel Alloy | 2.1 | 1 | Citations (PDF) |
| 180 | Mechanical properties of Ti-6Al-4V thin walls fabricated by laser powder bed fusion | 3.3 | 8 | Citations (PDF) |
| 181 | Shear properties of low-temperature soldered joints of aluminum nitride metallized with Sn-1.0Ag-0.5Cu-Ti alloys | 5.0 | 4 | Citations (PDF) |
| 182 | Intrinsic brittleness of laser powder bed fusion processed H13 hot work tool steel | 3.3 | 0 | Citations (PDF) |
| 183 | Toward predictable phase structures in high-entropy oxides: A strategy for screening multicomponent compositions | 6.9 | 13 | Citations (PDF) |
| 184 | Hot-Cracking Behaviors in (CoNi)85Mo15 Medium-Entropy Alloys Manufactured via Powder Bed Fusion | 0.4 | 1 | Citations (PDF) |
| 185 | Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal | 5.4 | 119 | Citations (PDF) |
| 186 | Virtual surface morphology generation of Ti-6Al-4V directed energy deposition via conditional generative adversarial network | 6.8 | 19 | Citations (PDF) |
| 187 | Effects of deformation-induced martensitic transformation on quasi-static and dynamic compressive properties of metastable SiVCrMnFeCo high-entropy alloys | 6.0 | 16 | Citations (PDF) |
| 188 | Effects of asymmetric basal texture on the stretchability and the microstructure variations for the rolled ZK60 magnesium alloy sheet | 6.0 | 11 | Citations (PDF) |
| 189 | Synergy of tensile strength-ductility in IN718/CoCrFeMnNi/IN718 multi-material processed by powder high-pressure torsion and annealing | 5.4 | 10 | Citations (PDF) |
| 190 | Microstructure and mechanical properties of equiatomic Ti-containing medium-entropy alloys | 6.0 | 28 | Citations (PDF) |
| 191 | Quantitative characterization of mechanical twins based on new digital image processing method | 5.0 | 3 | Citations (PDF) |
| 192 | Charpy impact toughness of Cu–Fe–Mn-based immiscible medium-entropy alloys | 6.3 | 15 | Citations (PDF) |
| 193 | Explainable machine learning for understanding and predicting geometry and defect types in Fe-Ni alloys fabricated by laser metal deposition additive manufacturing | 6.1 | 68 | Citations (PDF) |
| 194 | Multiscale defects enable synergetic improvement in yield strength of CrCoNi-based medium-entropy alloy fabricated via laser-powder bed fusion | 3.3 | 4 | Citations (PDF) |
| 195 | Efficient design of harmonic structure using an integrated hetero-deformation induced hardening model and machine learning algorithm | 8.7 | 43 | Citations (PDF) |
| 196 | Improvement in the high temperature mechanical properties of additively manufactured Ti–48Al–2Cr–2Nb alloy using heat treatment | 4.7 | 14 | Citations (PDF) |
| 197 | Hetero-deformation promoted strengthening and toughening in BCC rich eutectic and near eutectic high entropy alloys | 13.6 | 63 | Citations (PDF) |
| 198 | Corrosion behavior of VCrFeCoNi medium-entropy alloy in chloride solution | 6.1 | 18 | Citations (PDF) |
| 199 | Mechanical Properties and Microstructural Evolutions of High-Pressure Torsion-Processed Al7068 Alloy | 0.9 | 6 | Citations (PDF) |
| 200 | Electroplasticity in the Al0.6CoCrFeNiMn high entropy alloy subjected to electrically-assisted uniaxial tension | 13.6 | 45 | Citations (PDF) |
| 201 | Observation of multi-scale damage evolution in transformation-induced plasticity steel under bending condition | 2.2 | 4 | Citations (PDF) |
| 202 | A simple physics-based constitutive model to describe strain hardening in a wide strain range | 2.1 | 9 | Citations (PDF) |
| 203 | Microstructure tailoring by manipulating chemical composition in novel CoNiMnCrAl high-entropy alloys | 6.0 | 19 | Citations (PDF) |
| 204 | Cryogenic tensile behavior of laser additive manufactured CoCrFeMnNi high entropy alloys | 6.0 | 50 | Citations (PDF) |
| 205 | High-density nanoprecipitates and phase reversion via maraging enable ultrastrong yet strain-hardenable medium-entropy alloy | 8.7 | 67 | Citations (PDF) |
| 206 | Influence of ceramic reinforcement characteristics on the microstructure and wear behavior of NiTi matrix composites | 2.5 | 5 | Citations (PDF) |
| 207 | Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD | 6.3 | 98 | Citations (PDF) |
| 208 | Superplastic behavior of Al15(CuFeMn)85 immiscible medium-entropy alloy | 4.7 | 3 | Citations (PDF) |
| 209 | Superior gradient heterostructured alloys fabricated by laser powder bed fusion via annealing and ultrasonic nanocrystal surface modification | 5.4 | 32 | Citations (PDF) |
| 210 | Finite Element Modeling of Crumpling of Metallic Thin Foil | 2.9 | 0 | Citations (PDF) |
| 211 | Extraordinary combination of strength and ductility in an additively manufactured Fe-based medium entropy alloy through in situ formed η-nanoprecipitate and heterogeneous microstructure | 3.3 | 1 | Citations (PDF) |
| 212 | Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4 | 3.3 | 6 | Citations (PDF) |
| 213 | Corrigendum to “Fundamental analysis of deformation behavior in core–shell heterostructured materials” [Comput. Mater. Sci. 215 (2022) 111818] | 3.2 | 1 | Citations (PDF) |
| 214 | Effect of Y2O3 Nanoparticles on the Evolution of the Microstructure and Mechanical Properties of Severely Plastic Deformed Cu Sheets During Friction Stir Processing | 3.3 | 7 | Citations (PDF) |
| 215 | Influence of tensile properties on hole expansion ratio investigated using a generative adversarial imputation network with explainable artificial intelligence | 3.4 | 12 | Citations (PDF) |
| 216 | High strength and high ductility of a severely deformed high-entropy alloy in the presence of hydrogen | 8.0 | 34 | Citations (PDF) |
| 217 | Synergic Combination of Strength and Ductility through Both Grain Refinement and Precipitation in Al0.3CoCrNi Medium‐Entropy Alloy | 2.9 | 8 | Citations (PDF) |
| 218 | The astonishing effect of Si addition on low-cycle fatigue life in a metastable high-entropy alloy | 6.3 | 10 | Citations (PDF) |
| 219 | A neural network model for high entropy alloy design | 10.7 | 81 | Citations (PDF) |
| 220 | Boost in mechanical strength of additive manufactured CoCrFeMnNi HEA by reinforcement inclusion of B4C nano-particles | 6.0 | 38 | Citations (PDF) |
| 221 | Synthesis and characterization of novel NiTi–Ni3Ti/SiC nanocomposites prepared by mechanical alloying and microwave-assisted sintering process | 5.4 | 14 | Citations (PDF) |
| 222 | Fabrication of Equiatomic CoCrFeMnNi High-Entropy Alloy by Metal Injection Molding Process Using Coarse-Sized Powders | 0.4 | 4 | Citations (PDF) |
| 223 | Dynamic compression behavior of CoCrFeMnNi high-entropy alloy fabricated by direct energy deposition additive manufacturing | 6.0 | 27 | Citations (PDF) |
| 224 | Enhanced ductility by delayed deformation-induced martensite transformation in multi-step hardened FeNiMnCoTiSi medium-entropy alloy | 6.0 | 17 | Citations (PDF) |
| 225 | Superior tensile properties and formability synergy of high-entropy alloys through inverse-gradient structures via laser surface treatment | 5.4 | 20 | Citations (PDF) |
| 226 | Numerical fracture prediction of martensitic steel by uncoupled and coupled type fracture models | 4.7 | 16 | Citations (PDF) |
| 227 | Significance of adiabatic heating on phase transformation in titanium-based alloys during severe plastic deformation | 5.0 | 16 | Citations (PDF) |
| 228 | A new transformation-induced plasticity-assisted dual-phase medium-entropy alloy with ultra-high cryogenic mechanical properties | 5.4 | 23 | Citations (PDF) |
| 229 | Effects of AlN addition into AISI 316L on melt pool stability and microstructural evolution during laser powder bed fusion | 6.3 | 18 | Citations (PDF) |
| 230 | Ultra-high work hardening mediated by three-level precipitation in a Ni2CoCr0.5Si0.3Al0.2Ti0.2 medium entropy alloy | 6.1 | 11 | Citations (PDF) |
| 231 | A Constitutive Model of Tensile Deformation of a Metastable Medium-Entropy Alloy | 2.1 | 3 | Citations (PDF) |
| 232 | Design and mechanical properties of body-centered cubic AlVCr medium-entropy aluminum alloys | 6.1 | 6 | Citations (PDF) |
| 233 | Compositive role of refractory element Mo in improving strength and ductility of face-centered-cubic complex concentrated alloys | 8.7 | 67 | Citations (PDF) |
| 234 | Chemical core-shell metastability-induced large ductility in medium-entropy maraging and reversion alloys | 8.7 | 32 | Citations (PDF) |
| 235 | Cryogenic tensile fracture behavior of equal-channel angular pressed high-Mn steel | 2.5 | 9 | Citations (PDF) |
| 236 | Strength-ductility synergy and grain refinement mechanisms in a Co-Cr-Ni medium-entropy alloy with novel analogous harmonic structure | 5.4 | 25 | Citations (PDF) |
| 237 | Exceptional combination of mechanical and corrosion properties in partially recrystallized CoCrFeNiMo medium-entropy alloys | 6.1 | 15 | Citations (PDF) |
| 238 | Analyses of impact energy-absorbing performance of open- and closed-cell Al foams using modified split Hopkinson pressure bar | 6.0 | 18 | Citations (PDF) |
| 239 | Review of “Integrated Computer-Aided Process Engineering Session in the International Symposium on Innovation in Materials Processing (ISIMP, 26–29 October 2021)” | 1.2 | 0 | Citations (PDF) |
| 240 | Hetero-deformation induced strengthening, precipitation hardening, and metastability engineering in a novel maraging Fe68Ni10Mn10Co10Ti1.5Si0.5 medium entropy alloy | 6.0 | 17 | Citations (PDF) |
| 241 | Unprecedented bake hardening responses of interstitial high-entropy alloy by synergistic effect with lattice distortion | 6.9 | 22 | Citations (PDF) |
| 242 | Influence of severe plastic deformation of Cu powder and space holder content on microstructure, thermal and mechanical properties of copper foams fabricated by lost carbonate sintering method | 6.1 | 13 | Citations (PDF) |
| 243 | Development of a novel CoCrNi-based eutectic high entropy alloy for a wide temperature range | 6.3 | 17 | Citations (PDF) |
| 244 | A novel method to examine the effect of Al addition on the microstructure of CoCrFeNiMn high-entropy alloy | 2.2 | 3 | Citations (PDF) |
| 245 | Cellular structure engineering of additive manufactured CoCrFeMnNi high-entropy composite: The role of hard ceramic reinforcements in elemental segregation of constitutive elements | 2.7 | 5 | Citations (PDF) |
| 246 | Superior strength-ductility synergy by microstructural heterogeneities in pure titanium | 6.3 | 26 | Citations (PDF) |
| 247 | Recent advances in processing, and mechanical, thermal and electrical properties of Cu-SiC metal matrix composites prepared by powder metallurgy | 35.6 | 100 | Citations (PDF) |
| 248 | Energy-absorption analyses of grooved Al-sheet stacks using modified split Hopkinson pressure bar | 6.3 | 6 | Citations (PDF) |
| 249 | Prediction of Crack Density in additive manufactured AA7075 Alloy Reinforced with ZrH2 inoculant via Response Surface Method | 0.4 | 1 | Citations (PDF) |
| 250 | Cell boundary engineering of ferrous medium-entropy alloy fabricated by laser powder bed fusion | 5.4 | 28 | Citations (PDF) |
| 251 | Addressing the strength-ductility trade-off in a thermomechanical-processed high entropy alloy | 6.0 | 17 | Citations (PDF) |
| 252 | Microstructural and electrochemical behavior of spark plasma sintered (Cu-10Zn) + Al2O3 nanocomposites | 2.5 | 2 | Citations (PDF) |
| 253 | Effect of Warm Rolling on the Structure and Tensile Properties of a Metastable Fe-Based Medium Entropy Alloy | 3.3 | 24 | Citations (PDF) |
| 254 | Microband-driven martensitic transformation in as-hot-rolled metastable medium-entropy alloys | 6.3 | 9 | Citations (PDF) |
| 255 | Controlling defects of laser-powder bed fusion processed 316L stainless steel via ultrasonic nanocrystalline surface modification | 6.3 | 29 | Citations (PDF) |
| 256 | An overview of friction stir processing of Cu–SiC composites: Microstructural, mechanical, tribological, and electrical properties | 6.1 | 36 | Citations (PDF) |
| 257 | Liquation cracking in laser powder bed fusion-fabricated Inconel718 of as-built, stress-relieved, and hot isostatic pressed conditions | 6.3 | 15 | Citations (PDF) |
| 258 | Material-agnostic machine learning approach enables high relative density in powder bed fusion products | 13.7 | 29 | Citations (PDF) |
| 259 | Improving the Mechanical Properties of Low‐Carbon Steel by In Situ Strain Aging | 2.9 | 1 | Citations (PDF) |
| 260 | Strong yet strain-hardenable equiatomic CoCrFeMnNi high-entropy alloys by dynamic heterostructuring | 6.0 | 20 | Citations (PDF) |
| 261 | Machine Learning-Based Hardness Prediction of High-Entropy Alloys for Laser Additive Manufacturing | 2.0 | 38 | Citations (PDF) |
| 262 | Shear Deformation Behavior of Heterostructured Materials: Experimental and Numerical Analyses | 3.3 | 16 | Citations (PDF) |
| 263 | Large-scale fabrication method of heterostructured materials using conventional cold-rolling for industrial applications | 6.1 | 7 | Citations (PDF) |
| 264 | Energy-absorption analyses of honeycomb-structured Al-alloy and nylon sheets using modified split Hopkinson pressure bar | 3.4 | 8 | Citations (PDF) |
| 265 | Microstructure and Crystallographic Texture Evolution of β-Solidifying γ-TiAl Alloy During Single- and Multi-track Exposure via Laser Powder Bed Fusion | 3.3 | 10 | Citations (PDF) |
| 266 | High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties | 35.6 | 626 | Citations (PDF) |
| 267 | 1.7 Gpa tensile strength in ferrous medium entropy alloy via martensite and precipitation | 2.5 | 10 | Citations (PDF) |
| 268 | Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel | 5.4 | 157 | Citations (PDF) |
| 269 | Deformation-induced grain boundary segregation mediated high-strain rate superplasticity in medium entropy alloy | 5.4 | 52 | Citations (PDF) |
| 270 | Architectured heterogeneous alloys with selective laser melting | 5.4 | 64 | Citations (PDF) |
| 271 | Solid solution induced back-stress in multi-principal element alloys: Experiment and modeling | 6.3 | 16 | Citations (PDF) |
| 272 | Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys | 8.7 | 131 | Citations (PDF) |
| 273 | Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloy | 8.7 | 59 | Citations (PDF) |
| 274 | Toward excellent tensile properties of nitrogen-doped CoCrFeMnNi high-entropy alloy at room and cryogenic temperatures | 6.0 | 106 | Citations (PDF) |
| 275 | Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering | 6.0 | 18 | Citations (PDF) |
| 276 | Optimization of the pulsed arc welding parameters for wire arc additive manufacturing in austenitic steel applications | 2.6 | 32 | Citations (PDF) |
| 277 | Surface‐Tailored Medium Entropy Alloys as Radically Low Overpotential Oxygen Evolution Electrocatalysts | 11.5 | 90 | Citations (PDF) |
| 278 | Evolution of nanosized Cu-rich clusters in a Fe–15Cu–15Ni alloy produced by laser powder bed fusion | 6.3 | 7 | Citations (PDF) |
| 279 | Enhancement of tensile strength in AA 6061-T6 plates joined by gas tungsten arc welding using high entropy alloy filler sheet | 6.3 | 11 | Citations (PDF) |
| 280 | Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach | 6.1 | 47 | Citations (PDF) |
| 281 | On the development of a novel multi-phase high entropy alloy with transformation-induced plasticity effect | 6.0 | 32 | Citations (PDF) |
| 282 | Mechanical properties and microstructural evolution of high-pressure torsion-processed Al7075 alloy at elevated temperatures | 6.3 | 10 | Citations (PDF) |
| 283 | Determination of damage model parameters using nano- and bulk-scale digital image correlation and the finite element method | 6.1 | 15 | Citations (PDF) |
| 284 | Novel deep learning approach for practical applications of indentation | 5.0 | 17 | Citations (PDF) |
| 285 | Fabrication of multi-gradient heterostructured CoCrFeMnNi high-entropy alloy using laser metal deposition | 6.3 | 45 | Citations (PDF) |
| 286 | Double-humped strain hardening in a metastable ferrous medium-entropy alloy by cryogenic pre-straining and subsequent heat treatment | 5.4 | 19 | Citations (PDF) |
| 287 | Origin of superior low-cycle fatigue resistance of an interstitial metastable high-entropy alloy | 13.6 | 30 | Citations (PDF) |
| 288 | Processing and microstructure of Ti-Cu binary alloys: A comprehensive review | 35.6 | 134 | Citations (PDF) |
| 289 | Cold Spray and Laser-Assisted Cold Spray of CrMnCoFeNi High Entropy Alloy Using Nitrogen as the Propelling Gas | 2.8 | 34 | Citations (PDF) |
| 290 | Air‐Permeable Waterproofing Electrocardiogram Patch to Monitor Full‐Day Activities for Multiple Days | 8.8 | 36 | Citations (PDF) |
| 291 | Constitutive modeling and finite element analysis of metastable medium entropy alloy | 6.3 | 11 | Citations (PDF) |
| 292 | Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy | 4.0 | 56 | Citations (PDF) |
| 293 | Upgrading of superior strength–ductility trade-off of CoCrFeNiMn high-entropy alloy by microstructural engineering | 2.5 | 33 | Citations (PDF) |
| 294 | Gradient-structured high-entropy alloy with improved combination of strength and hydrogen embrittlement resistance | 8.0 | 73 | Citations (PDF) |
| 295 | Free volume formation and the high strength of pure Mg after room temperature core-sheath ECAP passes | 6.1 | 24 | Citations (PDF) |
| 296 | Superlative room temperature and cryogenic tensile properties of nanostructured CoCrFeNi medium-entropy alloy fabricated by powder high-pressure torsion | 5.4 | 29 | Citations (PDF) |
| 297 | Role of cellular structure on deformation twinning and hetero-deformation induced strengthening of laser powder-bed fusion processed CuSn alloy | 3.3 | 14 | Citations (PDF) |
| 298 | Effects of processing parameters and heat treatment on the microstructure and magnetic properties of the in-situ synthesized Fe-Ni permalloy produced using direct energy deposition | 6.0 | 43 | Citations (PDF) |
| 299 | Heterostructured alloys with enhanced strength-ductility synergy through laser-cladding | 5.4 | 54 | Citations (PDF) |
| 300 | A precipitation-hardened AlSi10Mg alloy fabricated using selective laser melting | 6.3 | 36 | Citations (PDF) |
| 301 | The influence of laser powder-bed fusion microstructures on the corrosion behavior of CuSn alloy | 3.4 | 5 | Citations (PDF) |
| 302 | Asymmetry evolutions in microstructure and strain hardening behavior between tension and compression for AZ31 magnesium alloy | 6.3 | 15 | Citations (PDF) |
| 303 | A New Proposal for a Method to Measure Orthogonal R-Value Using a Single Tensile Test with Three-Dimensional Digital Image Correlation | 1.8 | 5 | Citations (PDF) |
| 304 | Fe55Co17.5Ni10Cr12.5Mo5 High-Entropy Alloy with Outstanding Cryogenic Mechanical Properties Driven by Deformation-Induced Phase Transformation Behavior | 3.3 | 42 | Citations (PDF) |
| 305 | Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel | 6.9 | 129 | Citations (PDF) |
| 306 | Mechanical and magnetic properties of soft magnetic Fe–Ni permalloy produced by directed energy deposition processes | 3.4 | 24 | Citations (PDF) |
| 307 | The subsurface deformed region and superficial protective tribo-oxide layer during wear in a non-equiatomic CoCrFeNiV high entropy alloy | 6.9 | 41 | Citations (PDF) |
| 308 | Microstructure and defect effects on strength and hydrogen embrittlement of high-entropy alloy CrMnFeCoNi processed by high-pressure torsion | 6.3 | 54 | Citations (PDF) |
| 309 | Modeling of deformation behavior of copper under equal channel angular pressing | 0.4 | 2 | Citations (PDF) |
| 310 | A facile strengthening method by co-doping boron and nitrogen in CoCrFeMnNi high-entropy alloy | 6.3 | 43 | Citations (PDF) |
| 311 | A New Digital Image Correlation Method for Measuring Wide Strain Range True Stress–Strain Curve of Clad Materials | 3.3 | 10 | Citations (PDF) |
| 312 | Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel | 6.3 | 42 | Citations (PDF) |
| 313 | Importance of Microstructural Features in Bimodal Structure–Property Linkage | 3.3 | 14 | Citations (PDF) |
| 314 | Bauschinger Effect or Kinematic Hardening: Bridging Microstructure and Continuum Mechanics | 3.3 | 28 | Citations (PDF) |
| 315 | Determining reliable wide-strain-range equivalent stress–strain curves using 3D digital image correlation | 6.1 | 18 | Citations (PDF) |
| 316 | Excellent combination of cryogenic strength and ductility of a metastable Fe65Ni15Co8Mn8Ti3Si medium entropy alloy through the exceptional deformation-induced martensitic transformation | 3.4 | 12 | Citations (PDF) |
| 317 | Transformation-induced plasticity in the heterogeneous microstructured Ti-Zr-Nb-Sn alloy via in-situ alloying with directed energy deposition | 3.3 | 4 | Citations (PDF) |
| 318 | Multi-scale investigation on local strain and damage evolution of Al1050/steel/Al1050 clad sheet | 6.1 | 20 | Citations (PDF) |
| 319 | Thickness effect on the microstructures, mechanical properties, and anisotropy of laser-powder bed fusion processed 316L stainless steel | 3.4 | 16 | Citations (PDF) |
| 320 | Crystallographic-orientation-dependent magnetic properties of Fe–Ni permalloy in-situ alloyed using additive manufacturing | 6.7 | 29 | Citations (PDF) |
| 321 | Effect of Tension Temperature on the Anisotropy of Tensile Behavior for Az31 Alloys: A Visco-Plastic Self-Consistent Analysis | 3.3 | 8 | Citations (PDF) |
| 322 | Phase-selective recrystallization makes eutectic high-entropy alloys ultra-ductile | 13.7 | 215 | Citations (PDF) |
| 323 | Effect of substrate yield strength and grain size on the residual stress of direct energy deposition additive manufacturing measured by neutron diffraction | 6.3 | 36 | Citations (PDF) |
| 324 | Differential superplasticity in a multi-phase multi-principal element alloy by initial annealing | 3.4 | 20 | Citations (PDF) |
| 325 | Microstructure and corrosion resistance of highly <111> oriented electrodeposited CoNiFe medium-entropy alloy films | 6.1 | 29 | Citations (PDF) |
| 326 | Deformation behavior of lightweight clad sheet: Experiment and modeling | 6.3 | 25 | Citations (PDF) |
| 327 | Effect of phase interface on stretch-flangeability of metastable ferrous medium-entropy alloys | 6.3 | 7 | Citations (PDF) |
| 328 | Low-cycle fatigue behavior and surface treatment of a twinning-induced plasticity high-entropy alloy | 6.3 | 16 | Citations (PDF) |
| 329 | Tailoring microstructure with spatial heterogeneity in CoCrFeMnNi high-entropy alloy via laser surface relaxation | 6.3 | 22 | Citations (PDF) |
| 330 | Relation of phase fraction to superplastic behavior of multi-principal element alloy with a multi-phase structure | 5.4 | 21 | Citations (PDF) |
| 331 | Surface heterostructuring of laser-clad 316L stainless steel through texture-driven deformation twinning | 5.4 | 37 | Citations (PDF) |
| 332 | Gradient heterostructured laser-powder bed fusion processed CoCrFeMnNi high entropy alloy | 3.3 | 11 | Citations (PDF) |
| 333 | Fabrication of structural and compositional heterostructured CoCrNi–CoCrFeMnNi multi-material using direct energy deposition additive manufacturing | 4.7 | 13 | Citations (PDF) |
| 334 | 3D printing of bioactive materials for drug delivery applications | 5.0 | 15 | Citations (PDF) |
| 335 | Work hardening behavior of hot-rolled metastable Fe
50
Co
25
Ni
10
Al
5
Ti
5
Mo
5
medium-entropy alloy: in situ neutron diffraction analysis | 6.2 | 20 | Citations (PDF) |
| 336 | Constitutive modeling of cellular-structured metals produced by additive manufacturing | 8.7 | 46 | Citations (PDF) |
| 337 | Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal | 6.3 | 102 | Citations (PDF) |
| 338 | Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys | 11.1 | 160 | Citations (PDF) |
| 339 | Fundamental analysis of deformation behavior in core-shell heterostructured materials | 3.2 | 8 | Citations (PDF) |
| 340 | Effect of Zr Addition on Microstructure and Mechanical Properties of a Cast Cu60Fe40 Alloy | 3.3 | 6 | Citations (PDF) |
| 341 | Multi-layered heterostructured CoCrFeMnNi high-entropy alloy processed using direct energy deposition and ultrasonic nanocrystalline surface modification | 6.1 | 26 | Citations (PDF) |
| 342 | Role of synergistic hardening and damage evolution on the stretchability of Al1050/steel/Al1050 sheets | 6.1 | 19 | Citations (PDF) |
| 343 | Manufacturing of (Al–10Zn) / TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties | 6.3 | 6 | Citations (PDF) |
| 344 | Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB2 filler rod | 5.0 | 7 | Citations (PDF) |
| 345 | Mechanically derived short-range order and its impact on the multi-principal-element alloys | 13.7 | 89 | Citations (PDF) |
| 346 | Accelerated damage mechanisms of aluminized superalloy turbine blades regarding combined high-and-low cycle fatigue | 5.7 | 23 | Citations (PDF) |
| 347 | A Method for Measuring Plastic Strain Ratio Over a Wide Strain Range Using the Digital Image Correlation Technology | 3.3 | 8 | Citations (PDF) |
| 348 | Effects of strain rate on tensile ductility in Cu-added stable Fe–Cr–Ni-based austenitic stainless steels | 6.3 | 7 | Citations (PDF) |
| 349 | Continuous Severe Plastic Deformation of Low‐Carbon Steel: Physical–Mechanical Properties and Multiscale Structure Analysis | 2.0 | 7 | Citations (PDF) |
| 350 | Enhanced thermoelectric performance of Bi0.5Sb1.5Te3 composites through potential barrier scattering at heterogeneous interfaces | 5.3 | 21 | Citations (PDF) |
| 351 | Hetero-deformation-induced strengthening of multi-phase Cu–Fe–Mn medium entropy alloys by dynamic heterostructuring | 6.3 | 22 | Citations (PDF) |
| 352 | A powder-metallurgy-based fabrication route towards achieving high tensile strength with ultra-high ductility in high-entropy alloy | 5.4 | 74 | Citations (PDF) |
| 353 | Isotropic and kinematic hardening of a high entropy alloy | 5.4 | 47 | Citations (PDF) |
| 354 | Heterostructured materials: superior properties from hetero-zone interaction | 4.5 | 1,081 | Citations (PDF) |
| 355 | Effects of grain size on body-centered-cubic martensitic transformation in metastable Fe46Co30Cr10Mn5Si7V2 high-entropy alloy | 5.4 | 67 | Citations (PDF) |
| 356 | Enhanced cryogenic tensile properties with multi-stage strain hardening through partial recrystallization in a ferrous medium-entropy alloy | 5.4 | 64 | Citations (PDF) |
| 357 | Unusual strain-induced martensite and absence of conventional grain refinement in twinning induced plasticity high-entropy alloy processed by high-pressure torsion | 6.3 | 27 | Citations (PDF) |
| 358 | Body-centered-cubic martensite and the role on room-temperature tensile properties in Si-added SiVCrMnFeCo high-entropy alloys | 13.6 | 61 | Citations (PDF) |
| 359 | Anomalous compliance of interpenetrating-phase composite of Ti and Mg synthesized by liquid metal dealloying | 5.4 | 55 | Citations (PDF) |
| 360 | Deep learning-based phase prediction of high-entropy alloys: Optimization, generation, and explanation | 6.9 | 203 | Citations (PDF) |
| 361 | Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review | 3.3 | 186 | Citations (PDF) |
| 362 | Novel Co-Cu-Based Immiscible Medium-Entropy Alloys with Promising Mechanical Properties | 2.2 | 30 | Citations (PDF) |
| 363 | Effects of temperature and loading rate on phase stability and deformation mechanism in metastable V10Cr10Co30FexNi50-x high entropy alloys | 6.3 | 14 | Citations (PDF) |
| 364 | Welding Thermal Cycle Impact on the Microstructure and Mechanical Properties of Thermo–Mechanical Control Process Steels | 2.0 | 13 | Citations (PDF) |
| 365 | Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels | 3.3 | 51 | Citations (PDF) |
| 366 | Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling | 2.2 | 18 | Citations (PDF) |
| 367 | Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility | 5.4 | 175 | Citations (PDF) |
| 368 | Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation | 6.3 | 97 | Citations (PDF) |
| 369 | Effect of grain size on the low-cycle fatigue behavior of carbon-containing high-entropy alloys | 6.3 | 41 | Citations (PDF) |
| 370 | In-situ carbide-reinforced CoCrFeMnNi high-entropy alloy matrix nanocomposites manufactured by selective laser melting: Carbon content effects on microstructure, mechanical properties, and deformation mechanism | 12.8 | 93 | Citations (PDF) |
| 371 | Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification | 6.3 | 37 | Citations (PDF) |
| 372 | Exploration of optimal microstructure and mechanical properties in continuous microstructure space using a variational autoencoder | 6.9 | 88 | Citations (PDF) |
| 373 | Outstanding mechanical properties of ultrafine-grained Al7075 alloys by high-pressure torsion | 6.3 | 41 | Citations (PDF) |
| 374 | Architectured multi-metal CoCrFeMnNi-Inconel 718 lamellar composite by high-pressure torsion | 5.4 | 41 | Citations (PDF) |
| 375 | Stretch-flangeability of CoCrFeMnNi high-entropy alloy | 6.3 | 11 | Citations (PDF) |
| 376 | Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy | 5.4 | 91 | Citations (PDF) |
| 377 | Printed Stretchable Single-Nanofiber Interconnections for Individually-Addressable Highly-Integrated Transparent Stretchable Field Effect Transistor Array | 8.7 | 17 | Citations (PDF) |
| 378 | Correlation between microstructural heterogeneity and mechanical properties of WC-Co composite additively manufactured by selective laser melting | 2.5 | 31 | Citations (PDF) |
| 379 | Super-resolving material microstructure image via deep learning for microstructure characterization and mechanical behavior analysis | 10.7 | 62 | Citations (PDF) |
| 380 | Temperature- and strain-dependent thermally-activated deformation mechanism of a ferrous medium-entropy alloy | 4.7 | 17 | Citations (PDF) |
| 381 | Excellent strength-ductility combination of multi-layered sheets composed of high-strength V10Cr10Fe50Co30 high entropy alloy and 304 austenitic stainless steel | 6.3 | 11 | Citations (PDF) |
| 382 | Synergetic strengthening from grain refinement and nano-scale precipitates in non-equiatomic CoCrFeNiMo medium-entropy alloy | 4.7 | 41 | Citations (PDF) |
| 383 | Strength–ductility enhancement in multi-layered sheet with high-entropy alloy and high-Mn twinning-induced plasticity steel | 6.3 | 8 | Citations (PDF) |
| 384 | Twinning engineering of high-entropy alloys: An exercise in process optimization and modeling | 6.3 | 24 | Citations (PDF) |
| 385 | Unraveling the discontinuous plastic flow of a Co-Cr-Fe-Ni-Mo multiprincipal-element alloy at deep cryogenic temperatures | 2.7 | 20 | Citations (PDF) |
| 386 | Effect of heat treatment on the mechanical properties and microstructure of HSLA steels processed by various technologies | 2.2 | 29 | Citations (PDF) |
| 387 | Superior strain-hardening by deformation-induced nano-HCP martensite in Fe–Mn–Si–C high-manganese steel | 6.3 | 20 | Citations (PDF) |
| 388 | Simultaneous effects of deformation-induced plasticity and precipitation hardening in metastable non-equiatomic FeNiCoMnTiSi ferrous medium-entropy alloy at room and liquid nitrogen temperatures | 5.4 | 55 | Citations (PDF) |
| 389 | Metastable δ-ferrite and twinning-induced plasticity on the strain hardening behavior of directed energy deposition-processed 304L austenitic stainless steel | 3.3 | 9 | Citations (PDF) |
| 390 | Deformation behavior of a Co-Cr-Fe-Ni-Mo medium-entropy alloy at extremely low temperatures | 14.0 | 123 | Citations (PDF) |
| 391 | Superior antifouling properties of a CoCrFeMnNi high-entropy alloy | 2.5 | 34 | Citations (PDF) |
| 392 | Effects of Laser Power on the Microstructure Evolution and Mechanical Properties of Ti–6Al–4V Alloy Manufactured by Direct Energy Deposition | 3.3 | 37 | Citations (PDF) |
| 393 | Gradient-structured ferrous medium-entropy alloys with enhanced strength-ductility synergy by ultrasonic nanocrystalline surface modification | 6.3 | 28 | Citations (PDF) |
| 394 | Microstructural evolution and mechanical properties of nanocrystalline Fe–Mn–Al–C steel processed by high-pressure torsion | 6.3 | 22 | Citations (PDF) |
| 395 | Superior phase transformation-assisted mechanical properties of a metastable medium-entropy ferrous alloy with heterogeneous microstructure | 2.5 | 15 | Citations (PDF) |
| 396 | Novel multi-metal stainless steel (316L)/high-modulus steel (Fe-TiB2) composite with enhanced specific modulus and strength using high-pressure torsion | 2.5 | 13 | Citations (PDF) |
| 397 | Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy | 5.7 | 48 | Citations (PDF) |
| 398 | Analysis of texture and grain shape effects on the yield anisotropy of Zr-2.5wt%Nb pressure tube alloy using crystal plasticity finite element method | 2.9 | 12 | Citations (PDF) |
| 399 | 2.3 GPa cryogenic strength through thermal-induced and deformation-induced body-centered cubic martensite in a novel ferrous medium entropy alloy | 5.4 | 49 | Citations (PDF) |
| 400 | Effect of heat treatment on microstructural heterogeneity and mechanical properties of 1%C-CoCrFeMnNi alloy fabricated by selective laser melting | 3.3 | 25 | Citations (PDF) |
| 401 | Delayed deformation-induced martensite transformation and enhanced cryogenic tensile properties in laser additive manufactured 316L austenitic stainless steel | 3.3 | 26 | Citations (PDF) |
| 402 | Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying | 12.8 | 48 | Citations (PDF) |
| 403 | TiC-reinforced CoCrFeMnNi composite processed by cold-consolidation and subsequent annealing | 2.5 | 25 | Citations (PDF) |
| 404 | Quantification of Mechanical Twins in Metallographic Images of Twinning-Induced Plasticity Steels Using a New Image Processing Method | 3.3 | 4 | Citations (PDF) |
| 405 | Fabrication of Layered Cu-Fe-Cu Structure by Cold Consolidation of Powders using High-pressure Torsion | 0.5 | 2 | Citations (PDF) |
| 406 | Nano-scale heterogeneity-driven metastability engineering in ferrous medium-entropy alloy induced by additive manufacturing | 8.7 | 139 | Citations (PDF) |
| 407 | Metastability engineering of partially recrystallized C-doped non-equiatomic CoCrFeNiMo medium-entropy alloy | 3.0 | 27 | Citations (PDF) |
| 408 | An Effective Strengthening Strategy of Nano Carbide Precipitation and Cellular Microstructure Refinement in a Superalloy Fabricated by Selective Laser Melting Process | 2.2 | 19 | Citations (PDF) |
| 409 | Corrosion-resistant Cu-Fe-based immiscible medium-entropy alloy with tri-layer passivation | 8.0 | 22 | Citations (PDF) |
| 410 | A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing | 6.9 | 146 | Citations (PDF) |
| 411 | Hierarchical heterostructured FeCr–(Mg–Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying | 6.1 | 23 | Citations (PDF) |
| 412 | Effects of constrained groove pressing on mechanical properties of a TWIP steel | 1.8 | 6 | Citations (PDF) |
| 413 | Synergistic Effects of MWCNTs and High-Pressure Torsion-Induced Grain Refinement on Microhardness, Tribological Properties, and Corrosion Behavior of Cu and Cu/MWCNT Nanocomposites | 3.3 | 20 | Citations (PDF) |
| 414 | Additive Manufacturing Optimization of Directed Energy Deposition-Processed Ti-6Al-4V Alloy using Energy Density and Powder Deposition Density | 0.5 | 1 | Citations (PDF) |
| 415 | Effect of Initial Grain Size on Deformation Mechanism during High‐Pressure Torsion in V10Cr15Mn5Fe35Co10Ni25 High‐Entropy Alloy | 2.9 | 25 | Citations (PDF) |
| 416 | Laser dissimilar weldability of cast and rolled CoCrFeMnNi high-entropy alloys for cryogenic applications | 3.1 | 52 | Citations (PDF) |
| 417 | Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy | 6.0 | 69 | Citations (PDF) |
| 418 | Fine-tuning of mechanical properties in V10Cr15Mn5Fe35Co10Ni25 high-entropy alloy through high-pressure torsion and annealing | 6.3 | 50 | Citations (PDF) |
| 419 | High Coercivity in MnAl Disc Prepared by Severe Plastic Deformation | 1.5 | 10 | Citations (PDF) |
| 420 | Effects of transformation-induced plasticity (TRIP) on tensile property improvement of Fe45Co30Cr10V10Ni5-xMnx high-entropy alloys | 6.3 | 92 | Citations (PDF) |
| 421 | Threshold Voltage Drift in Te-Based Ovonic Threshold Switch Devices Under Various Operation Conditions | 3.4 | 38 | Citations (PDF) |
| 422 | Weldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications | 6.0 | 51 | Citations (PDF) |
| 423 | Beating Thermal Coarsening in Nanoporous Materials via High‐Entropy Design | 24.5 | 80 | Citations (PDF) |
| 424 | Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy | 6.3 | 79 | Citations (PDF) |
| 425 | A thermodynamic description of the Al–Cu–Fe–Mn system for an immiscible medium-entropy alloy design | 1.6 | 11 | Citations (PDF) |
| 426 | Biocompatible Magnesium Implant Double-Coated with Dexamethasone-Loaded Black Phosphorus and Poly(lactide-co-glycolide) | 4.7 | 10 | Citations (PDF) |
| 427 | Analysis of bending behavior of TiN particle-reinforced martensitic steel using micro-digital image correlation | 6.3 | 9 | Citations (PDF) |
| 428 | On the mechanistic understanding of annealing-induced strength enhancement of ultrafine-grained high-Mn steel | 2.5 | 7 | Citations (PDF) |
| 429 | Precipitation-driven metastability engineering of carbon-doped CoCrFeNiMo medium-entropy alloys at cryogenic temperature | 5.4 | 104 | Citations (PDF) |
| 430 | Novel precipitation and enhanced tensile properties in selective laser melted Cu-Sn alloy | 2.5 | 33 | Citations (PDF) |
| 431 | Effects of Si on the Microstructure and Work Hardening Behavior of Fe‒17Mn‒1.1C‒xSi High Manganese Steels | 3.3 | 17 | Citations (PDF) |
| 432 | Design of a Janus‐Faced Electrode for Highly Stretchable Zinc–Silver Rechargeable Batteries | 17.0 | 25 | Citations (PDF) |
| 433 | Nanoporous High-Entropy Alloy by Liquid Metal Dealloying | 2.2 | 47 | Citations (PDF) |
| 434 | Forecast of Adiabatic Shear Band Formation in Two Commercial Ultra-high-Strength Armor Steels by Split Hopkinson Pressure Bar | 2.1 | 16 | Citations (PDF) |
| 435 | Microstructure design using machine learning generated low dimensional and continuous design space | 2.5 | 54 | Citations (PDF) |
| 436 | Towards ferrous medium-entropy alloys with low-cost and high-performance | 5.4 | 136 | Citations (PDF) |
| 437 | Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy | 13.7 | 186 | Citations (PDF) |
| 438 | Understanding of adiabatic shear band evolution during high-strain-rate deformation in high-strength armor steel | 6.0 | 71 | Citations (PDF) |
| 439 | Short-range order strengthening in boron-doped high-entropy alloys for cryogenic applications | 8.7 | 191 | Citations (PDF) |
| 440 | Correlation with the composition of the different parts of p-type Bi0.5Sb1.5Te3 sintered bulks and their thermoelectric characteristics | 6.0 | 6 | Citations (PDF) |
| 441 | Effect of Processing Route on Microstructure and Mechanical Properties in Single-Roll Angular-Rolling | 2.8 | 9 | Citations (PDF) |
| 442 | Control of magnesium in vitro degradation based on ultrafine-grained surface gradient structure using ultrasonic nanocrystalline surface modification | 2.5 | 17 | Citations (PDF) |
| 443 | Analysis of damage-tolerance of TRIP-assisted V10Cr10Fe45Co30Ni5 high-entropy alloy at room and cryogenic temperatures | 6.0 | 81 | Citations (PDF) |
| 444 | On the phase transformation and dynamic stress–strain partitioning of ferrous medium-entropy alloy using experimentation and finite element method | 2.5 | 35 | Citations (PDF) |
| 445 | Breaking the limit of Young’s modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applications | 6.0 | 73 | Citations (PDF) |
| 446 | The role of ultrasonic nanocrystalline surface modification at elevated temperature on the hydrogen charging behavior of high-Mn steels | 2.5 | 6 | Citations (PDF) |
| 447 | Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy | 6.9 | 169 | Citations (PDF) |
| 448 | A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties | 8.7 | 153 | Citations (PDF) |
| 449 | Effect of the Difference in Strength of Hard and Soft Components on the Synergetic Strengthening of Layered Materials | 3.3 | 13 | Citations (PDF) |
| 450 | Finite Element Analysis of Severe Plastic Deformation by Rectangular Vortex Extrusion | 3.3 | 14 | Citations (PDF) |
| 451 | Constitutive Modeling with Critical Twinning Stress in CoCrFeMnNi High Entropy Alloy at Cryogenic Temperature and Room Temperature | 3.3 | 47 | Citations (PDF) |
| 452 | Microstructural and Mechanical Properties of a Material Processed by Streamline Proposed Vortex Extrusion Die | 3.3 | 4 | Citations (PDF) |
| 453 | Synergetic strengthening of additively manufactured (CoCrFeMnNi)99C1 high-entropy alloy by heterogeneous anisotropic microstructure | 3.3 | 33 | Citations (PDF) |
| 454 | Multi-layered gradient structure manufactured by single-roll angular-rolling and ultrasonic nanocrystalline surface modification | 5.4 | 44 | Citations (PDF) |
| 455 | Hetero-deformation-induced strengthening by twin-mediated martensitic transformation in an immiscible medium-entropy alloy | 5.4 | 58 | Citations (PDF) |
| 456 | Fabrication of FeCuNi alloy by mechanical alloying followed by consolidation using high-pressure torsion | 0.5 | 2 | Citations (PDF) |
| 457 | Effects of (W, Cr) carbide on grain refinement and mechanical properties for CoCrFeMnNi high entropy alloys | 6.0 | 63 | Citations (PDF) |
| 458 | Fine tuning of tensile properties in CrCoNi medium entropy alloy through cold rolling and annealing | 4.7 | 86 | Citations (PDF) |
| 459 | Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy | 6.0 | 90 | Citations (PDF) |
| 460 | Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel | 6.3 | 107 | Citations (PDF) |
| 461 | Superplasticity of V10Cr15Mn5Fe35Co10Ni25 high-entropy alloy processed using high-pressure torsion | 6.3 | 29 | Citations (PDF) |
| 462 | Understanding and Avoiding Intergranular Fracture Characteristics of Hadfield/Hot-Press-Forming Multi-Layer Steel Sheets | 2.1 | 8 | Citations (PDF) |
| 463 | Ultrastrong duplex high-entropy alloy with 2 GPa cryogenic strength enabled by an accelerated martensitic transformation | 5.4 | 127 | Citations (PDF) |
| 464 | High-Output and Bending-Tolerant Triboelectric Nanogenerator Based on an Interlocked Array of Surface-Functionalized Indium Tin Oxide Nanohelixes | 17.0 | 64 | Citations (PDF) |
| 465 | Microstructural tailoring in reverse gradient-structured copper sheet using single-roll angular-rolling and subsequent annealing | 6.3 | 23 | Citations (PDF) |
| 466 | Exceptional cryogenic strength-ductility synergy in Al0.3CoCrNi medium-entropy alloy through heterogeneous grain structure and nano-scale precipitates | 6.3 | 78 | Citations (PDF) |
| 467 | Development of strong and ductile metastable face-centered cubic single-phase high-entropy alloys | 8.7 | 218 | Citations (PDF) |
| 468 | Yield-strength prediction of flattened steel pipes by competing Bauschinger effect and strain hardening during pipe-forming | 3.4 | 10 | Citations (PDF) |
| 469 | Achieving high strength and high ductility in Al0.3CoCrNi medium-entropy alloy through multi-phase hierarchical microstructure | 2.5 | 66 | Citations (PDF) |
| 470 | Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing | 5.4 | 153 | Citations (PDF) |
| 471 | Effects of deformation–induced BCC martensitic transformation and twinning on impact toughness and dynamic tensile response in metastable VCrFeCoNi high–entropy alloy | 6.0 | 87 | Citations (PDF) |
| 472 | Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling | 8.7 | 99 | Citations (PDF) |
| 473 | High-cycle fatigue and tensile deformation behaviors of coarse-grained equiatomic CoCrFeMnNi high entropy alloy and unexpected hardening behavior during cyclic loading | 4.7 | 100 | Citations (PDF) |
| 474 | Diffuse γ/γ′ interfaces in the hierarchical dual-phase nanostructure of a Ni-Al-Ti alloy | 5.0 | 9 | Citations (PDF) |
| 475 | Grain Size Effect on Mechanical Properties Under Biaxial Stretching in Pure Tantalum | 3.3 | 10 | Citations (PDF) |
| 476 | Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test | 3.4 | 17 | Citations (PDF) |
| 477 | Ultra-high strength and excellent ductility in multi-layer steel sheet of austenitic hadfield and martensitic hot-press-forming steels | 6.3 | 31 | Citations (PDF) |
| 478 | Excellent combination of cryogenic-temperature strength and ductility of high-entropy-alloy-cored multi-layered sheet | 6.0 | 19 | Citations (PDF) |
| 479 | Effects of strain rate on room- and cryogenic-temperature compressive properties in metastable V10Cr10Fe45Co35 high-entropy alloy | 3.4 | 32 | Citations (PDF) |
| 480 | Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels | 3.3 | 47 | Citations (PDF) |
| 481 | Micromechanical analysis of orientation dependency on deformation behavior in DP steels by dislocation density-based crystal plasticity simulation | 3.7 | 19 | Citations (PDF) |
| 482 | Microstructural behavior and mechanical properties of nanocrystalline Ti-22Al-25Nb alloy processed by high-pressure torsion | 5.0 | 20 | Citations (PDF) |
| 483 | The enhancement of transformation induced plasticity effect through preferentially oriented substructure development in a high entropy alloy | 4.7 | 21 | Citations (PDF) |
| 484 | In situ neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loading | 5.4 | 53 | Citations (PDF) |
| 485 | Back-Stress Effect on the Mechanical Strength of TWIP-IF Steels Layered Sheet | 3.3 | 42 | Citations (PDF) |
| 486 | Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy | 6.3 | 31 | Citations (PDF) |
| 487 | Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys | 5.4 | 313 | Citations (PDF) |
| 488 | FCC to BCC transformation-induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35−x medium-entropy alloys | 3.4 | 126 | Citations (PDF) |
| 489 | Wear and friction behavior of self-lubricating hybrid Cu-(SiC + x CNT) composites | 12.8 | 87 | Citations (PDF) |
| 490 | Bayesian approach in predicting mechanical properties of materials: Application to dual phase steels | 6.3 | 52 | Citations (PDF) |
| 491 | Effect of grain size on the tensile behavior of V10Cr15Mn5Fe35Co10Ni25 high entropy alloy | 6.3 | 73 | Citations (PDF) |
| 492 | Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering | 6.0 | 199 | Citations (PDF) |
| 493 | Solid state recycling of aluminium AA6061 alloy chips by hot extrusion | 2.0 | 13 | Citations (PDF) |
| 494 | On the control of structural/compositional ratio of coherent order-disorder interfaces | 6.0 | 10 | Citations (PDF) |
| 495 | Hardness, wear and friction characteristics of nanostructured Cu-SiC nanocomposites fabricated by powder metallurgy route | 2.2 | 50 | Citations (PDF) |
| 496 | Microstructural evolution of liquid metal embrittlement in resistance-spot-welded galvanized TWinning-Induced Plasticity (TWIP) steel sheets | 5.0 | 71 | Citations (PDF) |
| 497 | Modelling feasibility constraints for materials design: Application to inverse crystallographic texture problem | 3.2 | 7 | Citations (PDF) |
| 498 | Effect of High‐Pressure Torsion on the Thermal and Mechanical Properties of La62Cu12Ni12Al14 Bulk Metallic Glass | 2.9 | 6 | Citations (PDF) |
| 499 | Effect of multi-pass friction stir processing on the microstructure and hardness of AA1100/Al13Fe4 in situ composites | 2.0 | 5 | Citations (PDF) |
| 500 | Microstructure, Micro‐Hardness, and Corrosion Resistance of Commercial Purity Al Processed by Hollow‐Cone High‐Pressure Torsion | 2.9 | 3 | Citations (PDF) |
| 501 | Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature | 6.3 | 103 | Citations (PDF) |
| 502 | Strength and ductility enhancement in the gradient structured twinning-induced plasticity steel by ultrasonic nanocrystalline surface modification | 6.3 | 32 | Citations (PDF) |
| 503 | Effect of μ-precipitates on the microstructure and mechanical properties of non-equiatomic CoCrFeNiMo medium-entropy alloys | 6.0 | 141 | Citations (PDF) |
| 504 | A novel approach for producing in situ Al-Al2Cu composite via friction stir processing | 2.0 | 11 | Citations (PDF) |
| 505 | An efficient machine learning approach to establish structure-property linkages | 3.2 | 85 | Citations (PDF) |
| 506 | Development of an Advanced Ultrahigh Strength TRIP Steel and Evaluation of Its Unique Strain Hardening Behavior | 3.3 | 31 | Citations (PDF) |
| 507 | Physics-Based Constitutive Model of Porous Materials for Die/Isostatic Compaction of Metallic Powders | 3.3 | 9 | Citations (PDF) |
| 508 | Development and Microstructural Characterization of a New Wrought High Entropy Superalloy | 3.3 | 12 | Citations (PDF) |
| 509 | Intragranular Dispersion of Carbon Nanotubes Comprehensively Improves Aluminum Alloys | 12.6 | 31 | Citations (PDF) |
| 510 | Small-Scale System for Evaluation of Stretch-Flangeability with Excellent Reliability | 2.0 | 8 | Citations (PDF) |
| 511 | High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy | 4.7 | 195 | Citations (PDF) |
| 512 | Stretch-flangeability of twinning-induced plasticity steel-cored three-layer steel sheet | 6.7 | 9 | Citations (PDF) |
| 513 | Boron doped ultrastrong and ductile high-entropy alloys | 8.7 | 356 | Citations (PDF) |
| 514 | Suppressed deformation instability in the twinning-induced plasticity steel-cored three-layer steel sheet | 8.7 | 56 | Citations (PDF) |
| 515 | Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy | 6.3 | 285 | Citations (PDF) |
| 516 | Effect of target-fixture geometry on shock-wave compacted copper powders | 3.3 | 0 | Citations (PDF) |
| 517 | Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile properties | 3.3 | 30 | Citations (PDF) |
| 518 | Impact Toughness of Ultrafine‐Grained Commercially Pure Titanium for Medical Application | 2.9 | 11 | Citations (PDF) |
| 519 | Mechanical behavior and solid solution strengthening model for face-centered cubic single crystalline and polycrystalline high-entropy alloys | 4.7 | 64 | Citations (PDF) |
| 520 | Simulation of Pipe-Manufacturing Processes Using Sheet Bending-Flattening | 1.8 | 10 | Citations (PDF) |
| 521 | Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys | 6.3 | 83 | Citations (PDF) |
| 522 | Wear Behavior of AZ31/Al2O3 Magnesium Matrix Surface Nanocomposite Fabricated via Friction Stir Processing | 1.6 | 46 | Citations (PDF) |
| 523 | Modelling the evolution of recrystallization texture for a non-grain oriented electrical steel | 3.2 | 16 | Citations (PDF) |
| 524 | Effects of homogenization temperature on cracking during cold-rolling of Al0.5CoCrFeMnNi high-entropy alloy | 4.4 | 26 | Citations (PDF) |
| 525 | High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy | 6.0 | 100 | Citations (PDF) |
| 526 | High‐Entropy Alloys: Potential Candidates for High‐Temperature Applications – An Overview | 2.9 | 485 | Citations (PDF) |
| 527 | Effect of post weld heat treatment on weldability of high entropy alloy welds | 3.1 | 74 | Citations (PDF) |
| 528 | Fabrication of Mg/Al12Mg17 in-situ surface nanocomposite via friction stir processing | 6.3 | 32 | Citations (PDF) |
| 529 | Single-roll angular-rolling: A new continuous severe plastic deformation process for metal sheets | 5.4 | 39 | Citations (PDF) |
| 530 | Effect of Annealing on Microstructure and Tensile Behavior of CoCrNi Medium Entropy Alloy Processed by High-Pressure Torsion | 1.7 | 55 | Citations (PDF) |
| 531 | Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures | 8.7 | 340 | Citations (PDF) |
| 532 | Hygroscopic Auxetic On-Skin Sensors for Easy-to-Handle Repeated Daily Use | 8.0 | 91 | Citations (PDF) |
| 533 | Strain hardening and micro-deformation behavior in advanced DP and TRIP steels: EBSD examinations and crystal plasticity simulations | 2.0 | 5 | Citations (PDF) |
| 534 | A Highly Sensitive Force Sensor with Fast Response Based on Interlocked Arrays of Indium Tin Oxide Nanosprings toward Human Tactile Perception | 17.0 | 50 | Citations (PDF) |
| 535 | Investigation of direct extrusion channel effects on twist extrusion using experimental and finite element analysis | 4.8 | 18 | Citations (PDF) |
| 536 | Effect of annealing heat treatment on microstructural evolution and tensile behavior of Al0.5CoCrFeMnNi high-entropy alloy | 6.3 | 98 | Citations (PDF) |
| 537 | Surface Abrasive Torsion for Improved Mechanical Properties and Microstructure | 2.1 | 0 | Citations (PDF) |
| 538 | Circumferential twisting during route B equal-channel angular pressing | 6.7 | 8 | Citations (PDF) |
| 539 | Metal Deposition on a Self‐Generated Microfibril Network to Fabricate Stretchable Tactile Sensors Providing Analog Position Information | 24.5 | 35 | Citations (PDF) |
| 540 | Superior Strength and Multiple Strengthening Mechanisms in Nanocrystalline TWIP Steel | 3.4 | 63 | Citations (PDF) |
| 541 | Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy | 6.3 | 104 | Citations (PDF) |
| 542 | Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing | 6.3 | 23 | Citations (PDF) |
| 543 | An approach for screening single phase high-entropy alloys using an in-house thermodynamic database | 4.7 | 23 | Citations (PDF) |
| 544 | Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77 K and 300 K | 3.4 | 69 | Citations (PDF) |
| 545 | Molybdenum Disulfide Surface Modification of Ultrafine-Grained Titanium for Enhanced Cellular Growth and Antibacterial Effect | 3.4 | 22 | Citations (PDF) |
| 546 | Microstructural Evolution and Mechanical Properties in Superlight Mg-Li Alloy Processed by High-Pressure Torsion | 2.8 | 37 | Citations (PDF) |
| 547 | Microstructural and Finite Element Analysis of Creep Failure in Dissimilar Weldment Between 9Cr and 2.25Cr Heat-Resistant Steels | 2.1 | 5 | Citations (PDF) |
| 548 | Effect of secondary phase particles on the tensile behavior of Mg-Zn-Ca alloy | 6.3 | 51 | Citations (PDF) |
| 549 | Ultra-high tensile strength nanocrystalline CoCrNi equi-atomic medium entropy alloy processed by high-pressure torsion | 6.3 | 123 | Citations (PDF) |
| 550 | Quantitative study on yield point phenomenon of low carbon steels processed by compact endless casting and rolling | 6.3 | 11 | Citations (PDF) |
| 551 | Effect of grain size on stretch-flangeability of twinning-induced plasticity steels | 6.3 | 25 | Citations (PDF) |
| 552 | Plastic Deformation Behavior of 40Fe–25Ni–15Cr–10Co–10V High-Entropy Alloy for Cryogenic Applications | 3.3 | 58 | Citations (PDF) |
| 553 | Compaction behavior of water-atomized CoCrFeMnNi high-entropy alloy powders | 4.4 | 40 | Citations (PDF) |
| 554 | Effect of Porosity on Mechanical Anisotropy of 316L Austenitic Stainless Steel Additively Manufactured by Selective Laser Melting | 0.5 | 13 | Citations (PDF) |
| 555 | Tensile properties of cold-rolled TWIP-cored three-layer steel sheets | 6.3 | 26 | Citations (PDF) |
| 556 | Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steel | 3.4 | 30 | Citations (PDF) |
| 557 | Finite Element and Experimental Analyses on the Formability of Steel Sheets Produced by Compact Endless Cast and Rolling | 2.1 | 4 | Citations (PDF) |
| 558 | Mechanical and biological behavior of ultrafine-grained Ti alloy aneurysm clip processed using high-pressure torsion | 3.3 | 16 | Citations (PDF) |
| 559 | Twist Extrusion as a Potent Tool for Obtaining Advanced Engineering Materials: A Review | 2.9 | 77 | Citations (PDF) |
| 560 | Residual Stress Effect on the Delayed Fracture of Twinning-Induced Plasticity Steels | 2.1 | 20 | Citations (PDF) |
| 561 | Superior Pre-Osteoblast Cell Response of Etched Ultrafine-Grained Titanium with a Controlled Crystallographic Orientation | 3.4 | 35 | Citations (PDF) |
| 562 | Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77 K | 2.5 | 68 | Citations (PDF) |
| 563 | Novel 1.5 GPa-strength with 50%-ductility by transformation-induced plasticity of non-recrystallized austenite in duplex steels | 3.4 | 62 | Citations (PDF) |
| 564 | On the rule-of-mixtures of the hardening parameters in TWIP-cored three-layer steel sheet | 3.3 | 20 | Citations (PDF) |
| 565 | Numerical analysis on the formation of P-orientation near coarse precipitates in FCC crystals during recrystallization | 8.7 | 22 | Citations (PDF) |
| 566 | Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering | 6.0 | 217 | Citations (PDF) |
| 567 | Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy | 13.7 | 426 | Citations (PDF) |
| 568 | Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy | 10.7 | 43 | Citations (PDF) |
| 569 | Wear Resistance of the La62Cu12Ni12Al14 Bulk Metallic Glass Under Dry Friction Conditions | 2.8 | 6 | Citations (PDF) |
| 570 | Dynamic tensile behavior of twinning-induced plasticity/low-carbon (TWIP/LC) steel clad sheets bonded by hot rolling | 6.3 | 23 | Citations (PDF) |
| 571 | Influence of high-pressure torsion and hot rolling on the microstructure and mechanical properties of aluminum–fullerene composites | 3.4 | 12 | Citations (PDF) |
| 572 | Interpretation of quasi-static and dynamic tensile behavior by digital image correlation technique in TWinning Induced Plasticity (TWIP) and low-carbon steel sheets | 6.3 | 39 | Citations (PDF) |
| 573 | Key factors of stretch-flangeability of sheet materials | 3.4 | 56 | Citations (PDF) |
| 574 | Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copper | 6.3 | 8 | Citations (PDF) |
| 575 | Neutron diffraction and finite element analysis of the residual stress distribution of copper processed by equal-channel angular pressing | 6.3 | 16 | Citations (PDF) |
| 576 | Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel | 6.3 | 86 | Citations (PDF) |
| 577 | Shock wave compaction and sintering of mechanically alloyed CoCrFeMnNi high-entropy alloy powders | 6.3 | 40 | Citations (PDF) |
| 578 | Effect of surface etching on the tensile behavior of coarse- and ultrafine-grained pure titanium | 6.3 | 14 | Citations (PDF) |
| 579 | Novel twin-roll-cast Ti/Al clad sheets with excellent tensile properties | 3.4 | 14 | Citations (PDF) |
| 580 | Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy | 6.3 | 114 | Citations (PDF) |
| 581 | Development of Methodology with Excellent Reproducibility for Evaluating Stretch-Flangeability Using a Sheared-Edge Tensile Test | 1.8 | 10 | Citations (PDF) |
| 582 | Interpretation of dynamic tensile behavior by austenite stability in ferrite-austenite duplex lightweight steels | 3.4 | 18 | Citations (PDF) |
| 583 | Fabrication of Fullerene-Reinforced Aluminum Matrix Nanocomposites | 3.3 | 20 | Citations (PDF) |
| 584 | Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys | 2.1 | 23 | Citations (PDF) |
| 585 | Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes | 1.8 | 110 | Citations (PDF) |
| 586 | Three-dimensional microstructure modeling of particulate composites using statistical synthetic structure and its thermo-mechanical finite element analysis | 3.2 | 36 | Citations (PDF) |
| 587 | Effect of coarse precipitates on surface roughening of an FCC polycrystalline material using crystal plasticity | 3.2 | 15 | Citations (PDF) |
| 588 | Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy | 6.3 | 139 | Citations (PDF) |
| 589 | Stretch-Flangeability of Harmonic Structure Material Manufactured by Powder Metallurgy Method | 0.5 | 0 | Citations (PDF) |
| 590 | Dynamic tensile deformation behavior of Zr-based amorphous alloy matrix composites reinforced with tungsten or tantalum fibers | 3.3 | 6 | Citations (PDF) |
| 591 | Compressive behavior of NiTi-based composites reinforced with alumina nanoparticles | 6.0 | 29 | Citations (PDF) |
| 592 | Strain induced hardening and softening behaviors of deformed Cu and Cu–Ge alloys | 2.5 | 4 | Citations (PDF) |
| 593 | Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model | 3.4 | 54 | Citations (PDF) |
| 594 | Novel strip-cast Mg/Al clad sheets with excellent tensile and interfacial bonding properties | 3.4 | 9 | Citations (PDF) |
| 595 | Ton-scale metal–carbon nanotube composite: The mechanism of strengthening while retaining tensile ductility | 4.1 | 33 | Citations (PDF) |
| 596 | Correlation Between Microstructures and Tensile Properties of Strain-Based API X60 Pipeline Steels | 2.1 | 29 | Citations (PDF) |
| 597 | Effects of Effective Dendrite Size on Dynamic Tensile Properties of Ti-Based Amorphous Matrix Composites | 2.1 | 5 | Citations (PDF) |
| 598 | Enhanced wear resistivity of a Zr-based bulk metallic glass processed by high-pressure torsion under reciprocating dry conditions | 3.3 | 12 | Citations (PDF) |
| 599 | Ring-Constraint High-Pressure Torsion Process | 2.1 | 3 | Citations (PDF) |
| 600 | High-temperature thermo-mechanical behavior of functionally graded materials produced by plasma sprayed coating: Experimental and modeling results | 3.3 | 23 | Citations (PDF) |
| 601 | Multiscale architectured materials with composition and grain size gradients manufactured using high-pressure torsion | 3.4 | 37 | Citations (PDF) |
| 602 | Online Measurement of Electrospinning Jet Velocity of Polyvinyl Alcohol | 0.7 | 5 | Citations (PDF) |
| 603 | Factors governing hole expansion ratio of steel sheets with smooth sheared edge | 3.3 | 63 | Citations (PDF) |
| 604 | Compressive deformation behavior of CrMnFeCoNi high-entropy alloy | 3.3 | 70 | Citations (PDF) |
| 605 | Large deformation behavior of twin-induced plasticity steels under high-pressure torsion | 3.3 | 21 | Citations (PDF) |
| 606 | Correlation between fracture toughness and stretch-flangeability of advanced high strength steels | 2.5 | 86 | Citations (PDF) |
| 607 | Bi-modal Structure of Copper via Room-Temperature Partial Recrystallization After Cryogenic Dynamic Compression | 2.1 | 5 | Citations (PDF) |
| 608 | Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel | 8.7 | 231 | Citations (PDF) |
| 609 | Effects of dendrite size on dynamic tensile deformation behavior in Zr-based amorphous alloys containing ductile dendrites | 6.3 | 6 | Citations (PDF) |
| 610 | Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet | 2.1 | 3 | Citations (PDF) |
| 611 | Effects of Friction and Anvil Design on Plastic Deformation during the Compression Stage of High-Pressure Torsion | 0.9 | 5 | Citations (PDF) |
| 612 | Obtaining Reliable True Plastic Stress-Strain Curves in a Wide Range of Strains Using Digital Image Correlation in Tensile Testing | 0.9 | 35 | Citations (PDF) |
| 613 | Effect of Revolution on Inhomogeneous Deformation of IF Steel in High Pressure Torsion | 0.6 | 0 | Citations (PDF) |
| 614 | Effect of the interfacial condition on the microtexture near the interface of Al/Cu composites during multi-pass caliber rolling | 6.9 | 12 | Citations (PDF) |
| 615 | Simple shear model of twist extrusion and its deviations | 3.3 | 22 | Citations (PDF) |
| 616 | Effect of friction stir processing on the microstructure of pure magnesium castings | 1.1 | 4 | Citations (PDF) |
| 617 | Effect of high-pressure torsion on the microstructure and wear behavior of NiTi alloy | 3.3 | 16 | Citations (PDF) |
| 618 | Correlative High‐Resolution Mapping of Strain and Charge Density in a Strained Piezoelectric Multilayer | 4.0 | 20 | Citations (PDF) |
| 619 | Consolidation of Cu-based amorphous alloy powders by high-pressure torsion | 3.4 | 13 | Citations (PDF) |
| 620 | Annealing behavior and shape memory effect in NiTi alloy processed by equal-channel angular pressing at room temperature | 6.3 | 35 | Citations (PDF) |
| 621 | Al/C60 Nanocomposites Fabricated by High-Pressure Torsion | 2.1 | 11 | Citations (PDF) |
| 622 | Interpretation of Fracture Toughness and R-Curve Behavior by Direct Observation of Microfracture Process in Ti-Based Dendrite-Containing Amorphous Alloys | 2.1 | 4 | Citations (PDF) |
| 623 | Microstructure and Mechanical Properties of Ultra-fine-Grained Al-Mg-Si Tubes Produced by Parallel Tubular Channel Angular Pressing Process | 2.1 | 18 | Citations (PDF) |
| 624 | Thickness inhomogeneity in hardness and microstructure of copper after the compressive stage in high-pressure torsion | 3.3 | 17 | Citations (PDF) |
| 625 | Plastic deformation and microstructural evolution during the shock consolidation of ultrafine copper powders | 6.3 | 22 | Citations (PDF) |
| 626 | Effect of C content on the microstructure and tensile properties of lightweight ferritic Fe-8Al-5Mn-0.1Nb alloy | 3.3 | 27 | Citations (PDF) |
| 627 | Work-Hardening Induced Tensile Ductility of Bulk Metallic Glasses via High-Pressure Torsion | 3.4 | 96 | Citations (PDF) |
| 628 | Finite element analysis of the plastic deformation in tandem process of simple shear extrusion and twist extrusion | 6.9 | 39 | Citations (PDF) |
| 629 | Surface Modification of Multipass Caliber-Rolled Ti Alloy with Dexamethasone-Loaded Graphene for Dental Applications | 8.0 | 94 | Citations (PDF) |
| 630 | Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method | 3.2 | 26 | Citations (PDF) |
| 631 | Unique Appearance of Lamellar Cleavage Patterns on Fracture Surfaces of Ti-Based Amorphous Matrix Composite | 2.1 | 7 | Citations (PDF) |
| 632 | Fast and fully-scalable synthesis of reduced graphene oxide | 3.4 | 607 | Citations (PDF) |
| 633 | Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy | 3.4 | 17 | Citations (PDF) |
| 634 | Microstructural evolution and strain-hardening behavior of multi-pass caliber-rolled Ti–13Nb–13Zr | 6.3 | 38 | Citations (PDF) |
| 635 | Off-axis twist extrusion for uniform processing of round bars | 3.3 | 18 | Citations (PDF) |
| 636 | Dynamic tension–compression asymmetry of martensitic transformation in austenitic Fe–(0.4, 1.0)C–18Mn steels for cryogenic applications | 8.7 | 38 | Citations (PDF) |
| 637 | Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion | 6.3 | 56 | Citations (PDF) |
| 638 | Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel angular pressing and direct extrusion in one step through an integrated die | 6.3 | 31 | Citations (PDF) |
| 639 | Evolution of microstructure and hardness in AZ31 alloy processed by high pressure torsion | 6.3 | 72 | Citations (PDF) |
| 640 | Effects of Annealing Treatment Prior to Cold Rolling on Delayed Fracture Properties in Ferrite-Austenite Duplex Lightweight Steels | 2.1 | 20 | Citations (PDF) |
| 641 | Compressibility of hierarchic-architectured agglomerates of hydrogen-reduced copper nanopowders | 3.4 | 3 | Citations (PDF) |
| 642 | Modeling and Characterization of Texture Evolution in Twist Extrusion | 2.1 | 18 | Citations (PDF) |
| 643 | Characterizations of dissimilar friction welding of ST37 and CK60 steels | 2.6 | 16 | Citations (PDF) |
| 644 | Effect of Core-Shell Structure on Compaction Behavior of Harmonic Powder | 0.5 | 0 | Citations (PDF) |
| 645 | Microstructure evolution in ultrafine-grained interstitial free steel processed by high pressure torsion | 0.4 | 3 | Citations (PDF) |
| 646 | An electron back-scattered diffraction study on the microstructure evolution of severely deformed aluminum AI6061 alloy | 0.4 | 2 | Citations (PDF) |
| 647 | Fabrication of W-Cu alloy via combustion synthesis infiltration under an ultra-gravity field | 3.3 | 3 | Citations (PDF) |
| 648 | Bandgap Tuning with Thermal Residual Stresses Induced in a Quantum DotSmall, 2014, 10, 3678-3684 | 11.5 | 13 | Citations (PDF) |
| 649 | Local and Global Stress–Strain Behaviors of Transformation-Induced Plasticity Steel Using the Combined Nanoindentation and Finite Element Analysis Method | 2.1 | 8 | Citations (PDF) |
| 650 | Three-Dimensional Characterization of SiC Particle-Reinforced Al Composites Using Serial Sectioning Tomography and Thermo-mechanical Finite Element Simulation | 2.1 | 24 | Citations (PDF) |
| 651 | Microstructure and Mechanical Properties of Copper Processed by Twist Extrusion with a Reduced Twist-Line Slope | 2.1 | 25 | Citations (PDF) |
| 652 | Residual Stress Analysis in Deep Drawn Twinning Induced Plasticity (TWIP) Steels Using Neutron Diffraction Method | 2.1 | 15 | Citations (PDF) |
| 653 | Anisotropy of Dynamic Compressive Properties of Non-Heat-Treating Cold-Heading-Quality Steel Bars | 2.1 | 4 | Citations (PDF) |
| 654 | Investigation of thermal resistance and power consumption in Ga-doped indium oxide (In2O3) nanowire phase change random access memory | 3.0 | 4 | Citations (PDF) |
| 655 | Circumferential shear strain in torsion-based severe plastic deformation | 5.4 | 4 | Citations (PDF) |
| 656 | Ga-doped indium oxide nanowire phase change random access memory cells | 2.6 | 10 | Citations (PDF) |
| 657 | An upper bound solution for twist extrusion process | 3.3 | 14 | Citations (PDF) |
| 658 | Effect of Post-annealing on Grain Boundary of Nano-crystalline Cu Processed by Powder High-Pressure Torsion | 2.1 | 3 | Citations (PDF) |
| 659 | Finite Element Analysis for Application to the Forming Process of Ti-based Bulk Metallic Glasses | 4.6 | 3 | Citations (PDF) |
| 660 | Quasi-static and dynamic compressive properties of Ti-based amorphous alloys modified from conventional Ti–6Al–4V alloy | 6.3 | 9 | Citations (PDF) |
| 661 | Finite Element and Experimental Analysis of Closure and Contact Bonding of Pores During Hot Rolling of Steel | 2.1 | 13 | Citations (PDF) |
| 662 | Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure Torsion | 2.1 | 42 | Citations (PDF) |
| 663 | Finite element analysis of the effect of friction in high pressure torsion | 3.3 | 27 | Citations (PDF) |
| 664 | Interfacial microstructures and properties of aluminum alloys/galvanized low-carbon steel under high-pressure torsion | 4.7 | 36 | Citations (PDF) |
| 665 | Wear properties of high pressure torsion processed ultrafine grained Al–7%Si alloy | 4.7 | 92 | Citations (PDF) |
| 666 | Space-holder effect on designing pore structure and determining mechanical properties in porous titanium | 4.7 | 70 | Citations (PDF) |
| 667 | Dislocation density-based finite element analysis of large strain deformation behavior of copper under high-pressure torsion | 8.7 | 125 | Citations (PDF) |
| 668 | Finite element analysis for the geometry effect on strain inhomogeneity during high-pressure torsion | 3.4 | 20 | Citations (PDF) |
| 669 | Hollow cone high-pressure torsion: Microstructure and tensile strength by unique severe plastic deformation | 5.4 | 15 | Citations (PDF) |
| 670 | Effect of Homogenization Treatment on the Microstructure and Mechanical Property Evolutions of As-Cast Al&ndash;Cu Alloy during High-Pressure Torsion | 1.2 | 7 | Citations (PDF) |
| 671 | Role of an encapsulating layer for reducing resistance drift in phase change random access memory | 1.2 | 3 | Citations (PDF) |
| 672 | Finite Element Simulation of Powder Compaction via Shock Consolidation Using Gas-gun System | 1.3 | 5 | Citations (PDF) |
| 673 | Effects of Effective Dendrite Size on Tensile Deformation Behavior in Ti-Based Dendrite-Containing Amorphous Matrix Composites Modified from Ti-6Al-4V Alloy | 2.1 | 18 | Citations (PDF) |
| 674 | Plastic Deformation Behavior and Microstructural Evolution of Al-Core/Cu-Sheath Composites in Multi-pass Caliber Rolling | 2.1 | 8 | Citations (PDF) |
| 675 | Plastic Deformation and Computer Simulations of Equal Channel Angular Pressing | 0.9 | 23 | Citations (PDF) |
| 676 | Planar Shock Wave Compaction of Oxidized Copper Nano Powders using High Speed Collision and Its Mechanical Properties | 0.5 | 2 | Citations (PDF) |
| 677 | Fabrication of Silicon Carbide Quantum Dots via Chemical-Etching Approach and Fluorescent Imaging for Living Cells | 0.6 | 2 | Citations (PDF) |
| 678 | Manufacturing and Evaluation of Properties of Nanocrystalline Ni bulk by Dynamic Compaction of Nano Ni powders using a Gas-gun System | 0.5 | 0 | Citations (PDF) |
| 679 | Manufacturing and Evaluation of the Properties of Hybrid Bulk Material by Shock-compaction of Nanocrystalline Cu-Ni Mixed Powder | 0.5 | 0 | Citations (PDF) |
| 680 | Analysis of the Change in Microstructures of Nano Copper Powders During the Hydrogen Reduction using X-ray Diffraction Patterns and Transmission Electron Microscope, and the Mechanical Property of Compacted Powders | 0.5 | 0 | Citations (PDF) |
| 681 | Microstructure Evolution and Mechanical Properties of Al-1080 Processed by a Combination of Equal Channel Angular Pressing and High Pressure Torsion | 2.1 | 17 | Citations (PDF) |
| 682 | Effects of microstructure and pipe forming strain on yield strength before and after spiral pipe forming of API X70 and X80 linepipe steel sheets | 6.3 | 28 | Citations (PDF) |
| 683 | Constitutive Modeling of Hot Deformation Behavior of the AA6063 Alloy with Different Precipitates | 2.1 | 12 | Citations (PDF) |
| 684 | Mechanical properties and microstructure evolution in ultrafine-grained AZ31 alloy processed by severe plastic deformation | 3.4 | 26 | Citations (PDF) |
| 685 | Design of Hierarchical Cellular Metals Using Accumulative Bundle Extrusion | 2.1 | 5 | Citations (PDF) |
| 686 | Dendrite size and tensile ductility in Ti-based amorphous alloys containing ductile dendrites | 6.3 | 8 | Citations (PDF) |
| 687 | An Investigation on the Fatigue Fracture of P/M Al-SiC Nanocomposites | 2.1 | 22 | Citations (PDF) |
| 688 | Finite Element Analysis of Deformation Homogeneity During Continuous and Batch Type Equal Channel Angular Pressing | 1.6 | 5 | Citations (PDF) |
| 689 | Effects of intergranular carbide precipitation on delayed fracture behavior in three TWinning Induced Plasticity (TWIP) steels | 6.3 | 43 | Citations (PDF) |
| 690 | Evaluation of Mechanical Properties of Tubular Materials With Hydraulic Bulge Test for Superconducting Radio Frequency (SRF) Cavities | 1.5 | 1 | Citations (PDF) |
| 691 | Analysis of plastic deformation behavior during back pressure equal channel angular pressing by the finite element method | 3.2 | 29 | Citations (PDF) |
| 692 | Shear banding behavior and fracture mechanisms of Zr55Al10Ni5Cu30 bulk metallic glass in uniaxial compression analyzed using a digital image correlation method | 4.7 | 30 | Citations (PDF) |
| 693 | Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns | 5.4 | 77 | Citations (PDF) |
| 694 | Recycling of AlSi8Cu3 alloy chips via high pressure torsion | 6.3 | 40 | Citations (PDF) |
| 695 | Quasi-static and dynamic compressive deformation behaviors in Zr-based amorphous alloys containing ductile dendrites | 6.3 | 23 | Citations (PDF) |
| 696 | Austenite stability and heterogeneous deformation in fine-grained transformation-induced plasticity-assisted steel | 5.4 | 107 | Citations (PDF) |
| 697 | Cross Flow During Twist Extrusion: Theory, Experiment, and Application | 2.1 | 36 | Citations (PDF) |
| 698 | High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum–copper system | 8.7 | 196 | Citations (PDF) |
| 699 | Estimating interface bonding strength in clad metals using digital image correlation | 5.4 | 18 | Citations (PDF) |
| 700 | Architecturing of Metal‐Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design | 2.9 | 81 | Citations (PDF) |
| 701 | Mechanisms of toughness improvement in Charpy impact and fracture toughness tests of non-heat-treating cold-drawn steel bar | 6.3 | 25 | Citations (PDF) |
| 702 | Kinetic study of non-isothermal crystallization in Al80Fe10Ti5Ni5 metallic glass | 3.3 | 9 | Citations (PDF) |
| 703 | Grain refinement and tensile strength of carbon nanotube-reinforced Cu matrix nanocomposites processed by high-pressure torsion | 3.3 | 44 | Citations (PDF) |
| 704 | Analysis of stress states in compression stage of high pressure torsion using slab analysis method and finite element method | 3.3 | 18 | Citations (PDF) |
| 705 | Serration Phenomena Occurring During Tensile Tests of Three High-Manganese Twinning-Induced Plasticity (TWIP) Steels | 2.1 | 43 | Citations (PDF) |
| 706 | Effect of Fiber Diameter on Quasi-static and Dynamic Compressive Properties of Zr-Based Amorphous Matrix Composites Reinforced with Stainless Steel Continuous Fibers | 2.1 | 2 | Citations (PDF) |
| 707 | Tomography-based Finite Element Analysis for the Mechanical Behavior of Porous Titanium Manufactured by a Space Holder Method | 0.5 | 2 | Citations (PDF) |
| 708 | Trend in Research of Powder Consolidation Using Severe Plastic Deformation | 0.5 | 1 | Citations (PDF) |
| 709 | Computer Simulation and Verification of Adiabatic Temperature and Apparent Activity Energy of the NiO/Al Aluminothermic System | 0.5 | 2 | Citations (PDF) |
| 710 | Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process | 1.3 | 13 | Citations (PDF) |
| 711 | Microstructural Evolution of UFG Magnesium Alloy Produced by Accumulative Back Extrusion (ABE) | 4.6 | 35 | Citations (PDF) |
| 712 | Microstructures and mechanical properties of Mg–Zn–Y alloy consolidated from gas-atomized powders using high-pressure torsion | 3.4 | 31 | Citations (PDF) |
| 713 | Effects of Aluminum Addition on Tensile and Cup Forming Properties of Three Twinning Induced Plasticity Steels | 2.1 | 43 | Citations (PDF) |
| 714 | Nanoindentation analysis for local properties of ultrafine grained copper processed by high pressure torsion | 3.4 | 15 | Citations (PDF) |
| 715 | Preface to the special issue on ultrafine-grained materials | 3.4 | 2 | Citations (PDF) |
| 716 | Mechanical properties and thermal stability of bulk Cu cold consolidated from atomized powders by high-pressure torsion | 3.4 | 23 | Citations (PDF) |
| 717 | Deformation behavior of consecutive workpieces in equal channel angular pressing of solid dies | 3.4 | 7 | Citations (PDF) |
| 718 | Effects of microstructure and yield ratio on strain hardening and Bauschinger effect in two API X80 linepipe steels | 6.3 | 48 | Citations (PDF) |
| 719 | X-ray diffraction study on the microstructure of a Mg–Zn–Y alloy consolidated by high-pressure torsion | 6.0 | 23 | Citations (PDF) |
| 720 | Analysis and estimation of yield strength of API X80 linepipe steel pipe by low-cycle fatigue tests | 3.3 | 6 | Citations (PDF) |
| 721 | Correlation of Microstructure with Mechanical Properties of Zr-Based Amorphous Matrix Composite Reinforced with Tungsten Continuous Fibers and Ductile Dendrites | 2.1 | 10 | Citations (PDF) |
| 722 | Dynamic Compressive Properties of Zr-based Amorphous Matrix Composites Reinforced with Tungsten Continuous Fibers or Porous Foams | 2.1 | 11 | Citations (PDF) |
| 723 | Deformation behavior in the tubular channel angular pressing (TCAP) as a noble SPD method for cylindrical tubes | 2.5 | 21 | Citations (PDF) |
| 724 | A combination of severe plastic deformation and ageing phenomena in Al–Mg–Si Alloys | 4.7 | 52 | Citations (PDF) |
| 725 | A semi-phenomenological constitutive model for hcp materials as exemplified by alpha titanium | 5.4 | 31 | Citations (PDF) |
| 726 | The dead metal zone in high-pressure torsion | 5.4 | 59 | Citations (PDF) |
| 727 | Structural, luminescent, and NO2 sensing properties of SnO2-core/V2O5-shell nanorods | 2.0 | 11 | Citations (PDF) |
| 728 | Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) Steels | 2.1 | 28 | Citations (PDF) |
| 729 | Inhomogeneity Through Warm Equal Channel Angular Pressing | 1.6 | 10 | Citations (PDF) |
| 730 | Hardness and microstructure of interstitial free steels in the early stage of high-pressure torsion | 3.4 | 17 | Citations (PDF) |
| 731 | Evaluation of Strain Rate During Equal-channel Angular Pressing | 2.5 | 39 | Citations (PDF) |
| 732 | Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes | 2.5 | 171 | Citations (PDF) |
| 733 | Hot deformation of ultrafine-grained Al6063/Al2O3 nanocomposites | 3.4 | 24 | Citations (PDF) |
| 734 | Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying | 3.4 | 14 | Citations (PDF) |
| 735 | Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels | 6.3 | 184 | Citations (PDF) |
| 736 | Mechanical properties of copper after compression stage of high-pressure torsion | 6.3 | 59 | Citations (PDF) |
| 737 | 3D FEM simulations for the homogeneity of plastic deformation in Al–Cu alloys during ECAP | 6.3 | 70 | Citations (PDF) |
| 738 | Upper bound analysis of deformation and dynamic ageing behavior in elevated temperature equal channel angular pressing of Al-Mg-Si alloys | 3.3 | 14 | Citations (PDF) |
| 739 | Tensile properties and fracture characteristics of ECAP-processed Al and Al-Cu alloys | 3.3 | 42 | Citations (PDF) |
| 740 | Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders | 3.4 | 45 | Citations (PDF) |
| 741 | Comparison of deformation and microstructural evolution between equal channel angular pressing and forward extrusion using the dislocation cell mechanism-based finite element method | 3.4 | 6 | Citations (PDF) |
| 742 | Analyses of route Bc equal channel angular pressing and post-equal channel angular pressing behavior by the finite element method | 3.4 | 5 | Citations (PDF) |
| 743 | Strain partitioning and mechanical stability of retained austenite | 5.4 | 215 | Citations (PDF) |
| 744 | Wear properties of ECAP-processed ultrafine grained Al–Cu alloys | 6.3 | 114 | Citations (PDF) |
| 745 | Dynamic ageing and the mechanical response of Al–Mg–Si alloy through equal channel angular pressing | 4.7 | 44 | Citations (PDF) |
| 746 | Grain refinement under high strain rate impact: A numerical approach | 3.2 | 53 | Citations (PDF) |
| 747 | The Effects of a Stabilizer Thickness of the YBCO Coated Conductor (CC) on the Quench/Recovery Characteristics | 1.5 | 22 | Citations (PDF) |
| 748 | Microstructure and Mechanical Properties of Oxide-Dispersion Strengthened Al6063 Alloy with Ultra-Fine Grain Structure | 2.1 | 38 | Citations (PDF) |
| 749 | Forming Nanocrystalline Structures in Metal Particle Impact | 2.1 | 17 | Citations (PDF) |
| 750 | Plastic deformation analysis of accumulative back extrusion | 0.4 | 5 | Citations (PDF) |
| 751 | A New Technique for Severe Plastic Deformation: The Cone–Cone Method | 2.9 | 24 | Citations (PDF) |
| 752 | Finite element analysis of the bending behavior of a workpiece in equal channel angular pressing | 3.3 | 14 | Citations (PDF) |
| 753 | The effects of alloying and pressing routes in equal channel angular pressing of Cu-Fe-Cr and Cu-Fe-Cr-Ag composites | 3.3 | 18 | Citations (PDF) |
| 754 | Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method | 6.3 | 13 | Citations (PDF) |
| 755 | Persistent photoconductivity in MgZnO alloys | 0.6 | 3 | Citations (PDF) |
| 756 | Shallow and Deep Centers in As-Grown and Annealed MgZnO/ZnO Structures with Quantum Wells | 2.3 | 8 | Citations (PDF) |
| 757 | Microstructural evolution of equal-channel angular pressed interstitial-free steel | 0.4 | 5 | Citations (PDF) |
| 758 | Investigation of electrical and optical properties of ZnO thin films grown with O2/O3 gas mixture | 2.5 | 3 | Citations (PDF) |
| 759 | Pulsed laser deposition of high-quality ZnO films using a high temperature deposited ZnO buffer layer | 2.5 | 8 | Citations (PDF) |
| 760 | Acceptor state formation in arsenic‐doped ZnO films grown using ozone | 1.5 | 2 | Citations (PDF) |
| 761 | Properties of post‐annealed ZnO films grown with O3 | 1.5 | 0 | Citations (PDF) |
| 762 | Finite element analysis of plastic deformation behavior during high pressure torsion processing | 6.7 | 78 | Citations (PDF) |
| 763 | Strength and strain hardening of nanocrystalline materials | 6.3 | 19 | Citations (PDF) |
| 764 | Finite element analysis of rotary-die equal channel angular pressing | 6.3 | 24 | Citations (PDF) |
| 765 | Finite element analysis of the effect of the inner corner angle in equal channel angular pressing | 6.3 | 43 | Citations (PDF) |
| 766 | Analysis of T-Shaped Equal Channel Angular Pressing using the Finite Element Method | 3.3 | 17 | Citations (PDF) |
| 767 | Materials and Process Development for ZnMgO/ZnO Light-Emitting Diodes | 2.8 | 15 | Citations (PDF) |
| 768 | Annealing effects on electrical properties of MgZnO films grown by pulsed laser deposition | 2.0 | 15 | Citations (PDF) |
| 769 | Severe plastic deformation and strain localization in groove pressing | 3.2 | 69 | Citations (PDF) |
| 770 | Plastic deformation characteristics of cross-equal channel angular pressing | 3.2 | 28 | Citations (PDF) |
| 771 | Microstructure, texture and mechanical properties of the magnesium alloy AZ31 processed by ECAP | 0.4 | 48 | Citations (PDF) |
| 772 | Dielectric passivation effects on ZnO light emitting diodes | 3.0 | 42 | Citations (PDF) |
| 773 | Phosphorus doped ZnO light emitting diodes fabricated via pulsed laser deposition | 3.0 | 86 | Citations (PDF) |
| 774 | Incorporation and drift of hydrogen at low temperatures in ZnO | 3.0 | 10 | Citations (PDF) |
| 775 | Lattice vibrational properties of ZnMgO grown by pulsed laser deposition | 3.0 | 20 | Citations (PDF) |
| 776 | Tensile properties of electrodeposited nanocrystalline nickel | 6.3 | 13 | Citations (PDF) |
| 777 | Kinetic dislocation model of microstructure evolution during severe plastic deformation | 6.3 | 35 | Citations (PDF) |
| 778 | Microstructure and corrosion properties of ultrafine-grained interstitial free steel | 6.3 | 141 | Citations (PDF) |
| 779 | Mechanical properties of equal channel angular pressed powder extrudates of a rapidly solidified hypereutectic Al-20wt% Si alloy | 6.3 | 24 | Citations (PDF) |
| 780 | Deformation behavior of strip-cast bulk amorphous matrix composites containing various crystalline particles | 6.3 | 6 | Citations (PDF) |
| 781 | Effect of strain rate on compressive behavior of Ti45Zr16Ni9Cu10Be20 bulk metallic glass | 6.3 | 59 | Citations (PDF) |
| 782 | Modelling microstructure evolution towards ultrafine crystallinity produced by severe plastic deformation | 3.4 | 12 | Citations (PDF) |
| 783 | Modelling microstructure evolution toward ultrafine crystallinity produced by severe plastic deformation | 3.4 | 42 | Citations (PDF) |
| 784 | Nano-web formation by the electrospinning at various electric fields | 3.4 | 47 | Citations (PDF) |
| 785 | On the effect of acute angles on deformation homogeneity in equal channel angular pressing | 6.3 | 19 | Citations (PDF) |
| 786 | Growth mode in strained ZnO films on Al2O3(0001) during sputtering | 2.0 | 2 | Citations (PDF) |
| 787 | Molecular dynamics study on local structure of amorphous and liquid Al2O3 | 3.3 | 13 | Citations (PDF) |
| 788 | Preform effect on the plastic deformation behavior of workpieces in equal channel angular pressing | 5.4 | 33 | Citations (PDF) |
| 789 | Band-edge electroluminescence from N+-implanted bulk ZnO | 3.0 | 39 | Citations (PDF) |
| 790 | Microstructural modelling of equal channel angular pressing for producing ultrafine grained materials | 6.3 | 49 | Citations (PDF) |
| 791 | Enhanced plasticity in a bulk amorphous matrix composite: macroscopic and microscopic viewpoint studies | 8.7 | 110 | Citations (PDF) |
| 792 | Phase mixture modeling of the strain rate dependent mechanical behavior of nanostructured materials | 8.7 | 113 | Citations (PDF) |
| 793 | Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of IF Steel | 2.9 | 61 | Citations (PDF) |
| 794 | Non-equilibrium Microstructure and Thermal Stability of Plasma-sprayed Al–Si Coatings | 2.5 | 11 | Citations (PDF) |
| 795 | (Bi,La)4Ti3O12 (BLT) thin films grown from nanocrystalline perovskite nuclei for ferroelectric memory devices | 3.0 | 10 | Citations (PDF) |
| 796 | Influence of arsenic during indium deposition on the formation of the wetting layers of InAs quantum dots grown by migration enhanced epitaxy | 2.0 | 18 | Citations (PDF) |
| 797 | Fictive stress model based finite element analysis for bulk metallic glasses at an elevated temperature | 3.3 | 7 | Citations (PDF) |
| 798 | Finite element analysis of compressive deformation of bulk metallic glasses | 8.7 | 31 | Citations (PDF) |
| 799 | Strengthening mechanisms of Zr-based devitrified amorphous alloy nanocomposites | 5.4 | 19 | Citations (PDF) |
| 800 | Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing | 6.3 | 221 | Citations (PDF) |
| 801 | Deformation behavior of copper during a high pressure torsion process | 6.7 | 49 | Citations (PDF) |
| 802 | Densification modelling for nanocrystalline metallic powders | 6.7 | 19 | Citations (PDF) |
| 803 | Texture and surface analysis of NiO buffer deposited on biaxially textured Ni tapes by a MOCVD method | 1.5 | 8 | Citations (PDF) |
| 804 | Modeling of texture evolution in copper under equal channel angular pressing | 0.4 | 44 | Citations (PDF) |
| 805 | Phase Mixture Models for Metallic Materials with Submicrometer Grain Size | 0.1 | 1 | Citations (PDF) |
| 806 | Modeling of aluminum via filling by forcefill | 2.0 | 13 | Citations (PDF) |
| 807 | Modeling of deformation behavior of copper under equal channel angular pressing | 0.4 | 67 | Citations (PDF) |
| 808 | Isothermal nanocrystallisation behaviour of melt spun Al86Ni9Mm5(Mmmischmetal)amorphous alloy | 1.8 | 13 | Citations (PDF) |
| 809 | Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing | 6.3 | 114 | Citations (PDF) |
| 810 | Finite element analysis of equal channel angular pressing of strain rate sensitive metals | 6.7 | 69 | Citations (PDF) |
| 811 | Constitutive Model for Cold Compaction of Ceramic Powder | 3.7 | 10 | Citations (PDF) |
| 812 | Densification mechanisms during hot isostatic pressing of stainless steel powder compacts | 6.7 | 26 | Citations (PDF) |
| 813 | Title is missing! | 3.4 | 1 | Citations (PDF) |
| 814 | Title is missing! | 1.0 | 8 | Citations (PDF) |
| 815 | Automatic scoliosis detection based on local centroids evaluation on moire topographic images of human backs | 7.8 | 29 | Citations (PDF) |
| 816 | Effects of strain hardenability and strain-rate sensitivity on the plastic flow and deformation homogeneity during equal channel angular pressing | 2.5 | 92 | Citations (PDF) |
| 817 | Finite element analysis of torsional deformation | 6.3 | 19 | Citations (PDF) |
| 818 | Hardening behaviour of partially crystallised amorphous Al alloys | 6.3 | 36 | Citations (PDF) |
| 819 | Finite element analysis of equal channel angular pressing using a round corner die | 6.3 | 147 | Citations (PDF) |
| 820 | Constitutive modelling of strength and plasticity of nanocrystalline metallic materials | 6.3 | 58 | Citations (PDF) |
| 821 | On the rule of mixtures for predicting the mechanical properties of composites with homogeneously distributed soft and hard particles | 6.7 | 168 | Citations (PDF) |
| 822 | Plastic deformation analysis of metals during equal channel angular pressing | 6.7 | 112 | Citations (PDF) |
| 823 | Title is missing! | 3.4 | 7 | Citations (PDF) |
| 824 | A constitutive model for densification of metal compacts: the case of copper | 6.3 | 34 | Citations (PDF) |
| 825 | Finite element analysis of high pressure torsion processing | 6.7 | 70 | Citations (PDF) |
| 826 | Ductility of ultrafine grained copper | 3.0 | 59 | Citations (PDF) |
| 827 | On the rule of mixtures for the hardness of particle reinforced composites | 6.3 | 325 | Citations (PDF) |
| 828 | On the die corner gap formation in equal channel angular pressing | 6.3 | 255 | Citations (PDF) |
| 829 | A phase mixture model of a particle reinforced composite with fine microstructure | 6.3 | 53 | Citations (PDF) |
| 830 | Strength and ductility of heavily drawn bundled Cu-Nb filamentary microcomposite wires with various Nb contents | 2.1 | 13 | Citations (PDF) |
| 831 | Power-law creep model for densification of powder compacts | 6.3 | 16 | Citations (PDF) |
| 832 | Microstructural behavior of rapidly solidified and extruded Al-14wt%Ni-14wt%Mm (Mm, misch metal) alloy powders | 6.3 | 44 | Citations (PDF) |
| 833 | Mechanical properties of partially crystallized aluminum based amorphous alloys | 0.8 | 50 | Citations (PDF) |
| 834 | The effects of grain size and porosity on the elastic modulus of nanocrystalline materials | 0.8 | 229 | Citations (PDF) |
| 835 | A composite model for mechanical properties of nanocrystalline materials | 5.4 | 70 | Citations (PDF) |
| 836 | Yield and compaction behavior of rapidly solidified Al–Si alloy powders | 6.3 | 32 | Citations (PDF) |
| 837 | Thermodynamic prediction of glass forming range in Al-Mg-REM ternary system | 1.6 | 8 | Citations (PDF) |
| 838 | Numerical Investigation of Mechanical Behaviour of Nanocrystalline Copper | 1.6 | 40 | Citations (PDF) |
| 839 | Analysis of Deformation of Porous Metals | 0.1 | 0 | Citations (PDF) |
| 840 | Elastoplastic Finite Element Analysis for Porous Metals | 1.6 | 40 | Citations (PDF) |
| 841 | Analysis of Coefficient of Friction in Compression of Porous Metal Rings | 1.6 | 15 | Citations (PDF) |
| 842 | Densification of sintered porous metal under hydrostatic pressure | 0.4 | 11 | Citations (PDF) |
| 843 | Plastic Yield Behaviour of Porous Metals | 1.6 | 113 | Citations (PDF) |
| 844 | Mass‐Transfer Effects on the Anodic Behavior of Porous Fe and Co Sintered Electrodes in Aqueous Ammoniacal Solution | 3.1 | 4 | Citations (PDF) |
| 845 | New Co10Fe10Mn35Ni35Zn10 high-entropy alloy Fabricated by Powder Metallurgy | 0.4 | 2 | Citations (PDF) |
| 846 | Effect of Direct Aging on the Mechanical Properties of Heterostructured A20X Alloy Manufactured by Laser-Powder Bed Fusion | 3.3 | 2 | Citations (PDF) |
| 847 | Modification of Split Hopkinson Pressure Bar for Analyzing Energy-Absorbing Performance of Open-Cell Ni Alloy Foams | 3.3 | 0 | Citations (PDF) |
| 848 | Ceramic insert enabled build plate thermal isolation for enhanced microstructure and residual stress mitigation in laser-based powder bed fusion of metals | 3.3 | 0 | Citations (PDF) |
| 849 | Mo-driven strengthening mechanisms in cobalt-free Cr20-xFe30Mn20Ni30Mox high-entropy alloys | 6.3 | 9 | Citations (PDF) |
| 850 | Hydrogen desorption activation energy and trapping sites associated with TiN particles in ferritic steel | 6.1 | 3 | Citations (PDF) |
| 851 | Synergistic effects of Si addition and deformation-induced martensitic transformation on the cryogenic mechanical behavior of FeCoCrNiV high-entropy alloy | 6.0 | 7 | Citations (PDF) |
| 852 | Multiscale strength-ductility synergy of double-sided underwater friction stir processed duplex stainless steel | 8.8 | 6 | Citations (PDF) |
| 853 | Direct aging effect on the mechanical properties of directed energy deposited CuNiAl-containing low-alloy steel | 6.1 | 0 | Citations (PDF) |
| 854 | Dualistic effect of ultrasonic shot peening on the mechanical properties of high- and medium-entropy alloys in annealed and cold-rolled states | 6.3 | 4 | Citations (PDF) |
| 855 | Optimization of laser powder bed fusion process to enhance mechanical properties of as-built Ti–6Al–4V samples | 6.1 | 5 | Citations (PDF) |
| 856 | Fe–N–C surface treatment as method for enhancing spontaneous passivation of low Ni and Cr stainless steel | 7.7 | 4 | Citations (PDF) |
| 857 | Hydrogen absorption and embrittlement of austenitized Zn–Al–Mg-coated medium-Mn steel | 6.1 | 2 | Citations (PDF) |
| 858 | Superior cryogenic mechanical properties of Fe-rich medium-entropy alloy with hierarchical heterostructure and phase transformation | 6.3 | 5 | Citations (PDF) |
| 859 | Superior cryogenic strength-ductility synergy in a multiphase lamellar-structured metastable high-entropy alloy | 13.6 | 4 | Citations (PDF) |
| 860 | Exploring nanomechanical characteristics of (CoCrFeMnNi)100-xNx high-entropy nitride ceramics: An integrated experimental and computational approach | 5.0 | 1 | Citations (PDF) |
| 861 | Multi-heterostructures synthesized via subsequent alloying of Y or Al into Mg melt using a 3D interconnected FeCr–Mg composite formed through liquid metal dealloying | 19.8 | 2 | Citations (PDF) |
| 862 | Compositional design and synergistic deformation mechanisms of a lightweight Ti-Al-V-Cr-Zr-Mo medium-entropy alloy | 8.7 | 13 | Citations (PDF) |
| 863 | Improving impact resistance of thermal batteries through honeycomb buffering devices under high-speed collision conditions via finite element simulation approach | 6.3 | 3 | Citations (PDF) |
| 864 | Leveraging compositional descriptors via explainable machine learning to understand hydrogen storage behavior | 9.0 | 3 | Citations (PDF) |
| 865 | Effect of phase reversion and recrystallisation on the microstructure and mechanical properties of a metastable medium-entropy alloy | 6.3 | 1 | Citations (PDF) |
| 866 | Microstructure-informed crystal plasticity modeling incorporating initial intragranular heterogeneities: insights into deformation mechanisms of additively manufactured alloy | 11.1 | 8 | Citations (PDF) |
| 867 | Temperature-driven kinetics of discontinuous L12–B2 competition enables Core–Shell architecture and strengthening in a Ni-based high-entropy alloy | 6.3 | 3 | Citations (PDF) |
| 868 | Intragranular-heterostructured FeCuNi medium-entropy alloy through immiscibility design approach | 13.6 | 0 | Citations (PDF) |
| 869 | Understanding the Impact Resistance of Projectiles with Electronic Equipment and Thermal Battery Under High-Speed Acceleration and Rotation | 3.3 | 3 | Citations (PDF) |
| 870 | Wire arc additive manufacturing of dissimilar alloys: Processing strategies and interfacial phenomena | 6.2 | 1 | Citations (PDF) |
| 871 | Additive Manufacturing of Hastelloy X Ni-Based Alloy: Current Trends, Challenges, and Perspectives | 3.3 | 1 | Citations (PDF) |
| 872 | Tailoring deformation mechanism via Ti, V, Mo microalloying in L-PBF fabricated Fe50Mn30Co10Cr10 multi-principal element alloys for enhanced strength–ductility synergy at room and cryogenic temperatures | 4.7 | 0 | Citations (PDF) |
| 873 | Microstructure, Mechanical Behavior, and Time-Dependent Plasticity in Laser Powder-Bed Fusion Processed SS316L Alloy | 3.3 | 0 | Citations (PDF) |
| 874 | Interplay between phase stability and deformation mechanisms through compositional tuning: Insights into alloy design strategy from the Co-Cr-Ni medium-entropy system | 6.3 | 17 | Citations (PDF) |
| 875 | On the Enhanced Cryogenic Strength of a Dual-Phase TRIP-Assisted High Entropy Alloy | 3.3 | 1 | Citations (PDF) |
| 876 | Design of strong and ductile Ni-rich high entropy alloy for cryogenic temperature application | 2.5 | 0 | Citations (PDF) |
| 877 | Extraordinary strength-ductility synergy in a novel high-entropy alloy via coupling multiple strengthening mechanisms | 4.7 | 2 | Citations (PDF) |
| 878 | Integrated computational and experimental analysis on the incompatible plastic deformation of heterostructured Ti-based joints | 10.5 | 4 | Citations (PDF) |
| 879 | Tailoring the microstructure and mechanical properties of laser-directed-energy-deposited IN738LC alloy via heat treatment | 6.3 | 0 | Citations (PDF) |
| 880 | Spinodal-assisted multiscale immiscibility enables superior strength–ductility synergy in (CuFeMnNi)96Al2Ti2 high-entropy alloy | 6.3 | 0 | Citations (PDF) |
| 881 | Hierarchical interfacial L12 shell formation enables stable high-temperature mechanical performance in FCC/B2 dual-phase high-entropy alloys | 11.1 | 4 | Citations (PDF) |
| 882 | Electron-beam-induced reversible crystalline–amorphous phase switching in silicon: A unified beam-heating perspective | 3.3 | 2 | Citations (PDF) |
| 883 | Enhanced strength-ductility synergy in heterostructured metastable FeCoNiCrMo medium-entropy alloys | 6.3 | 2 | Citations (PDF) |
| 884 | Microstructure characterization and recyclability assessment of heat-affected 316L stainless steel powders processed via directed energy deposition | 6.8 | 1 | Citations (PDF) |
| 885 | Surface severe plastic deformation-enabled deformation behavior control and mechanical property enhancement in metastable ferrous medium-entropy alloys | 11.1 | 5 | Citations (PDF) |
| 886 | Finite Element and Discrete Element Analyses of Anisotropic Powder Compaction for Axial Flux Motor Cores | 0.4 | 0 | Citations (PDF) |
| 887 | Enhanced corrosion resistance of equiatomic CoCrFeMnNi high-entropy alloy via chromium enrichment in the oxide layer induced by cathodic modification | 6.1 | 0 | Citations (PDF) |
| 888 | Formation of 3D interconnected multiphase heterostructures from CoCrFeMnNi high-entropy alloy via liquid metal dealloying using Cu–Ag melts | 6.1 | 3 | Citations (PDF) |
| 889 | Effect of annealing temperature on thermal expansion and cryogenic mechanical properties of low-thermal-expansion Co22.2Cr6.2Fe48.8Ni17.8Cu5.0 medium-entropy alloy | 6.3 | 0 | Citations (PDF) |
| 890 | Lüders strain ductilizes a 1.2 GPa high-strength metastable steel via delaying martensite transformation | 13.0 | 0 | Citations (PDF) |
| 891 | Multi‐Functional Properties of Superconducting and Hydrogen Storage in TaNb
2
HfZrTi High Entropy Alloy | 17.0 | 3 | Citations (PDF) |
| 892 | Gas tungsten arc welding of NiTi shape memory alloy and AlCoCrFeNi2.1 eutectic high entropy alloy using a niobium interlayer | 4.7 | 1 | Citations (PDF) |
| 893 | Inconel 625/Al2O3 functionally graded materials manufactured by directed energy deposition | 6.1 | 1 | Citations (PDF) |
| 894 | Coupling metastability engineering and martensite strengthening in Si-alloyed AISI 304L stainless steel toward enhanced strength-ductility synergy | 6.9 | 4 | Citations (PDF) |
| 895 | Rhenium-enhancement effects in Ni-based superalloys: Atomistic insights into dislocation dynamics during nanoindentation | 3.6 | 2 | Citations (PDF) |
| 896 | An expandable closed-loop framework for ductility optimization in refractory high-entropy alloys | 5.0 | 0 | Citations (PDF) |
| 897 | Cryogenic-to-ambient evolution of hetero-deformation-induced strengthening in dual-phase medium-entropy alloys | 5.0 | 1 | Citations (PDF) |
| 898 | Deep learning-driven innovation in metallic materials: A comprehensive review on microstructure analysis, property prediction, and inverse design | 13.6 | 8 | Citations (PDF) |
| 899 | Microstructural evolution and mechanical behavior of resistance spot welded CoCrFeMnNi high-entropy alloy: Experimental and simulation insights | 6.3 | 0 | Citations (PDF) |
| 900 | Alloy design paradigms in additive manufacturing: a new era of material innovation | 16.0 | 1 | Citations (PDF) |
| 901 | Integrated modeling and modal layered control strategy for flatness regulation in variable crown temper rolling | 7.5 | 2 | Citations (PDF) |
| 902 | Effect of ageing on the microstructure, mechanical properties, and deformation behavior of a recrystallised metastable medium-entropy alloy | 6.3 | 0 | Citations (PDF) |
| 903 | Microstructural regulation via dynamic offsets and shear force adjustment cryorolling to fabricate Cu-Sn alloy breaking the strength-conductivity trade-off | 6.7 | 2 | Citations (PDF) |
| 904 | Laser powder bed fusion of SAF 3207 hyper duplex stainless steel featuring columnar-to-equiaxed transition | 5.0 | 0 | Citations (PDF) |
| 905 | Intermetallic phase prediction in cobalt-free high-entropy alloys | 6.0 | 2 | Citations (PDF) |
| 906 | Entropy-engineered spinel oxide coatings to enhance oxidation resistance and electrical performance of solid oxide fuel cell interconnectors | 7.7 | 0 | Citations (PDF) |
| 907 | Effect of ZrB2 particle addition on strength-ductility improvement of Al–4Fe matrix composites by laser power bed fusion | 6.3 | 1 | Citations (PDF) |
| 908 | Argon plasma–induced compressive residual stress for simultaneous strength–ductility enhancement in a CoCrFeMnNi high-entropy alloy | 6.3 | 0 | Citations (PDF) |
| 909 | Data-selective machine learning framework (DSML) for defect-aware, interpretable yield-strength prediction for LPBF-fabricated AlSi10Mg alloys | 8.7 | 3 | Citations (PDF) |
| 910 | Surface passivation characteristics of Cantor alloy using dynamic electrochemical impedance spectroscopy | 7.7 | 0 | Citations (PDF) |
| 911 | Dissimilar fusion welding of NiTi shape memory alloy and AlCoCrFeNi2.1 eutectic high entropy alloy using multi-interlayer strategy | 5.0 | 0 | Citations (PDF) |
| 912 | Kinetic control of deformation-induced martensitic transformation as a toughening mechanism in advanced metastable austenitic alloys | 6.9 | 3 | Citations (PDF) |
| 913 | Grain-size-controlled TRIP kinetics enable cryogenic strength-ductility synergy in a FeNiMnCoTiSi medium-entropy alloy | 6.3 | 0 | Citations (PDF) |
| 914 | Mechanical twinning-driven post-deformation in a novel martensitic Fe70Ni10Mn8Co8Ti3Si1 (at%) medium-entropy alloy | 4.7 | 0 | Citations (PDF) |
| 915 | High-g impact survivability of thermal batteries: Gas-gun experiments and validated 3D finite-element design guidelines | 4.8 | 1 | Citations (PDF) |
| 916 | Effect of Zr/Si inoculation on hot cracking and mechanical properties of DED-fabricated Al7075 | 6.3 | 1 | Citations (PDF) |
| 917 | Descriptors for phase prediction in high-entropy alloys: a review of geometric, thermodynamic, and electronic approaches | 6.9 | 0 | Citations (PDF) |
| 918 | Data-efficient stress–strain prediction using optimized explainable LSTM network | 6.1 | 0 | Citations (PDF) |
| 919 | Geometry-sensitive constitutive model for predicting the relative density evolution and anisotropic shrinkage of binder-jetted 17-4 PH stainless steel during sintering | 6.3 | 0 | Citations (PDF) |
| 920 | Build-orientation effects on microstructure and mechanical properties of electron-beam-welded dissimilar rolled/PBF Ti–6Al–4V joints | 6.3 | 0 | Citations (PDF) |
| 921 | Impact reliability of multilayer stacked-cell thermal batteries using 3D FEM simulation and gas gun test validation | 6.1 | 0 | Citations (PDF) |
| 922 | Machine learning-enhanced analysis of tension-compression asymmetry in magnesium alloys | 6.3 | 0 | Citations (PDF) |
| 923 | Multiscale computational design of hydrogen-compatible integrated structural-functional alloys | 35.6 | 0 | Citations (PDF) |
| 924 | A novel specimen geometry for an improved estimation of hydrogen effects on the tensile behavior of face-centered cubic alloys | 5.4 | 0 | Citations (PDF) |
| 925 | Ultrasonic Nanocrystal Surface Modification of 3D Interconnected Heterostructured Complex Concentrated Alloys Produced by Liquid Metal Dealloying: Microstructural Evolution and Wear Behavior | 0.4 | 0 | Citations (PDF) |
| 926 | Gd microalloying in CoCrNi medium-entropy alloy: Insights for neutron-absorbing structural materials design | 4.7 | 0 | Citations (PDF) |
| 927 | Nanoscale domain formation of liquid-like aluminum emerging from sapphire through electron-beam heating | 3.7 | 0 | Citations (PDF) |
| 928 | Deciphering the incongruent relationship between uniaxial tensile behavior and stretch-formability in medium-Mn steels: Effect of microstructure and texture | 6.3 | 0 | Citations (PDF) |
| 929 | Harnessing interactive dynamic recrystallization to promote solid-state bonding in IN718 superalloy | 6.3 | 0 | Citations (PDF) |
| 930 | Controlling the crystalline architecture of Ti–Nb–Cr–Mn–V hydrogen storage alloy via high-pressure torsion for enhanced hydrogenation kinetics | 6.1 | 0 | Citations (PDF) |
| 931 | Tailoring co-sintering mechanism and mechanical properties in STS316L-IN718 layered composite via dual-nozzle material extrusion | 6.3 | 0 | Citations (PDF) |
| 932 | Cryogenic-enhanced HDI hardening in a heterostructured Cu-Sn alloy for strength-ductility-conductivity synergy | 4.5 | 0 | Citations (PDF) |
| 933 | Coupled FCC→HCP→BCC transformation and void evolution control strain-rate-dependent work hardening in a metastable high-entropy alloy | 6.3 | 0 | Citations (PDF) |
| 934 | Incidence and preoperative risk factors for failed back surgery syndrome: a nationwide population-based cohort study | 3.4 | 0 | Citations (PDF) |
| 935 | Enabling cryogenic strength–ductility synergy in SUS316L via hierarchical microstructures induced by directed energy deposition repair | 6.3 | 0 | Citations (PDF) |
| 936 | Enhanced cryogenic strength of directed energy deposited 316L through TiC reinforcement and its deformation mechanisms | 6.3 | 0 | Citations (PDF) |
| 937 | Hot-cracking mitigation in DED-fabricated porous AA7075 and property recovery by hot isostatic pressing | 5.0 | 0 | Citations (PDF) |
| 938 | Bifurcation analysis on formability coupled with microstructural evolution of dual-phase steels subjected to various stress states | 2.0 | 0 | Citations (PDF) |
| 939 | A comprehensive review of binary Ti-Cu alloys for biomedical applications: biocompatibility, osseointegration, antibacterial, and biocorrosion properties | 35.6 | 0 | Citations (PDF) |
| 940 | Defect Morphology-Dependent Microstructure and Corrosion Behavior in Selective Laser Melted 17-4PH Stainless Steel | 3.3 | 0 | Citations (PDF) |
