| 1 | Peak-like three-dimensional CoFe2O4/carbon nanotube decorated bamboo fabrics for simultaneous solar-thermal evaporation of water and photocatalytic degradation of bisphenol A | 13.6 | 53 | Citations (PDF) |
| 2 | Solar-thermal anisotropic zeolitic imidazolate framework/reduced graphene oxide hybrid aerogels for efficient clean-up of heavy crude oil | 10.7 | 8 | Citations (PDF) |
| 3 | Well-designed lamellar reduced graphene oxide-based foam for high-performance solar-driven water purification | 9.9 | 6 | Citations (PDF) |
| 4 | High-Precision Printing of Flexible MXene Patterns for Dynamically Tunable Electromagnetic Interference Shielding Performance | 8.0 | 10 | Citations (PDF) |
| 5 | Anisotropic MXene/Poly(vinyl alcohol) Composite Hydrogels with Vertically Oriented Channels and Modulated Surface Topography for Efficient Solar-Driven Water Evaporation and Purification | 8.0 | 47 | Citations (PDF) |
| 6 | Multistimuli-Responsive Shape-Memory Composites with a Water-Assisted Self-Healing Function Based on Sodium Carboxymethyl Cellulose/Poly(vinyl alcohol)/MXene | 8.0 | 24 | Citations (PDF) |
| 7 | Integrating and anisotropic MXene/reduced graphene oxide/PEDOT:PSS hybrid aerogel for active/passive thermal protection and stepwise thermal warning | 12.0 | 12 | Citations (PDF) |
| 8 | Scalable Compliant Graphene Fiber-Based Thermal Interface Material with Metal-Level Thermal Conductivity via Dual-Field Synergistic Alignment Engineering | 15.3 | 59 | Citations (PDF) |
| 9 | Spectral‐Selective and Adjustable Patterned Polydimethylsiloxane/MXene/Nanoporous Polytetrafluoroethylene Metafabric for Dynamic Infrared Camouflage and Thermal Regulation | 17.0 | 30 | Citations (PDF) |
| 10 | An Intelligent, Solar‐Responsive, and Thermally Conductive Phase‐Change System Toward Solar‐Thermal‐Electrical Conversion Featuring Daytime Blooming for Solar Energy Harvesting and Nighttime Closing for Thermal Preservation | 17.0 | 26 | Citations (PDF) |
| 11 | Emulsion‐Based Multiscale Structural Design Realizes Lightweight and Superelastic Graphene Aerogels for Electromagnetic Interference Shielding | 11.6 | 12 | Citations (PDF) |
| 12 | Insulating electromagnetic-shielding silicone compound enables direct potting electronics | 36.4 | 185 | Citations (PDF) |
| 13 | Hierarchical aerogels with hollow Co3O4 nanoparticles and graphitized carbon vesicles embedded in multi-channel carbon nanofibers for high-performance asymmetric supercapacitors | 12.0 | 19 | Citations (PDF) |
| 14 | Highly thermally conductive phase change composites with anisotropic graphene/cellulose nanofiber hybrid aerogels for efficient temperature regulation and solar-thermal-electric energy conversion applications | 12.8 | 106 | Citations (PDF) |
| 15 | Electrically conductive and highly compressible anisotropic MXene-wood sponges for multifunctional and integrated wearable devices | 13.6 | 46 | Citations (PDF) |
| 16 | Optimized electron/ion transport by constructing radially oriented channels in MXene hybrid fiber electrodes for high-performance supercapacitors at low temperatures | 9.3 | 48 | Citations (PDF) |
| 17 | 3D Printing of Ultralow-Concentration 2D Nanomaterial Inks for Multifunctional Architectures | 8.7 | 70 | Citations (PDF) |
| 18 | Engineering Lithiophilic Silver Sponge Integrated with Ion-Conductive PVDF/LiF Protective Layer for Dendrite-Free and High-Performance Lithium Metal Batteries | 5.4 | 14 | Citations (PDF) |
| 19 | Two-Dimensional Janus MXene Inks for Versatile Functional Coatings on Arbitrary Substrates | 8.0 | 36 | Citations (PDF) |
| 20 | Nature‐Inspired Solar‐Thermal Gradient Reduced Graphene Oxide Aerogel‐based Bilayer Phase Change Composites for Self‐Adaptive Personal Thermal Management | 17.0 | 101 | Citations (PDF) |
| 21 | Self-adhesive, self-healing, biocompatible and conductive polyacrylamide nanocomposite hydrogels for reliable strain and pressure sensors | 16.3 | 261 | Citations (PDF) |
| 22 | Adaptive and Adjustable MXene/Reduced Graphene Oxide Hybrid Aerogel Composites Integrated with Phase-Change Material and Thermochromic Coating for Synchronous Visible/Infrared Camouflages | 15.3 | 151 | Citations (PDF) |
| 23 | Design and advanced manufacturing of electromagnetic interference shielding materials | 14.0 | 268 | Citations (PDF) |
| 24 | Bioinspired Intelligent Solar‐Responsive Thermally Conductive Pyramidal Phase Change Composites with Radially Oriented Layered Structures toward Efficient Solar–Thermal–Electric Energy Conversion | 17.0 | 61 | Citations (PDF) |
| 25 | Three-Dimensional Mirror-Assisted and Concave Pyramid-Shaped Solar–Thermal Steam Generator for Highly Efficient and Stable Water Evaporation and Brine Desalination | 8.0 | 27 | Citations (PDF) |
| 26 | Hydrothermally Modified 3D Porous Loofah Sponges with MoS<sub>2</sub> Sheets and Carbon Particles for Efficient Solar Steam Generation and Seawater Desalination | 8.0 | 58 | Citations (PDF) |
| 27 | Highly conductive, hydrophobic, and acid/alkali-resistant MXene@PVDF hollow core-shell fibers for efficient electromagnetic interference shielding and Joule heating | 6.1 | 32 | Citations (PDF) |
| 28 | Dual-functional reduced graphene oxide decorated nanoporous polytetrafluoroethylene metafabrics for radiative cooling and solar-heating | 9.3 | 49 | Citations (PDF) |
| 29 | High-Quality Anisotropic Graphene Aerogels and Their Thermally Conductive Phase Change Composites for Efficient Solar–Thermal–Electrical Energy Conversion | 6.9 | 47 | Citations (PDF) |
| 30 | Simultaneous Solar-Thermal Desalination and Catalytic Degradation of Wastewater Containing Both Salt Ions and Organic Contaminants | 8.0 | 29 | Citations (PDF) |
| 31 | Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene-Based Multifunctional Tactile Sensors for Precisely Detecting and Distinguishing Temperature and Pressure Stimuli | 15.3 | 149 | Citations (PDF) |
| 32 | Three-Dimensional Spiral Evaporator with Side Channels for Efficient Solar-Driven Water Purification | 8.0 | 17 | Citations (PDF) |
| 33 | Solar-thermally enhanced catalytic hydrolysis of chemical warfare agent simulant with UiO-66-NCS decorated reduced graphene oxide aerogels | 12.0 | 19 | Citations (PDF) |
| 34 | Three-dimensional disposable wooden chopsticks-derived solar-thermal evaporators for environmental energy-enhanced water evaporation and purification | 6.8 | 19 | Citations (PDF) |
| 35 | Shape-Memory Three-Dimensional Evaporators with High Portability for Efficient Solar-Driven Freshwater Production | 8.0 | 11 | Citations (PDF) |
| 36 | N-Doped Porous Graphitic Carbon Hybridized with CrN Nanocrystals: Electrocatalysis-Induced Li<sub>2</sub>S Three-Dimensional Growth and Enhanced Cathode Kinetics | 5.4 | 9 | Citations (PDF) |
| 37 | An environmental energy-enhanced solar steam evaporator derived from MXene-decorated cellulose acetate cigarette filter with ultrahigh solar steam generation efficiency | 9.9 | 142 | Citations (PDF) |
| 38 | Tough and electrically conductive Ti3C2T MXene–based core–shell fibers for high–performance electromagnetic interference shielding and heating application | 12.0 | 85 | Citations (PDF) |
| 39 | All-weather-available electrothermal and solar–thermal wood-derived porous carbon-based steam generators for highly efficient water purification | 6.1 | 32 | Citations (PDF) |
| 40 | Hierarchically porous graphene/wood-derived carbon activated using ZnCl<sub>2</sub>and decorated with<i>in situ</i>grown NiCo<sub>2</sub>O<sub>4</sub>for high–performance asymmetric supercapacitors | 2.4 | 16 | Citations (PDF) |
| 41 | A polymer organosulfur redox mediator for high-performance lithium-sulfur batteries | 18.1 | 50 | Citations (PDF) |
| 42 | Reshapable MXene/Graphene Oxide/Polyaniline Plastic Hybrids with Patternable Surfaces for Highly Efficient Solar‐Driven Water Purification | 17.0 | 139 | Citations (PDF) |
| 43 | Constructing Atomic Fe and N Co‐doped Hollow Carbon Nanospheres with a Polymer Encapsulation Strategy for High‐Performance Lithium‐Sulfur Batteries with Accelerated Polysulfide Conversion | 3.4 | 6 | Citations (PDF) |
| 44 | Strong and conductive reduced graphene oxide-MXene porous films for efficient electromagnetic interference shielding | 8.6 | 97 | Citations (PDF) |
| 45 | Functional Polyaniline/MXene/Cotton Fabrics with Acid/Alkali-Responsive and Tunable Electromagnetic Interference Shielding Performances | 8.0 | 106 | Citations (PDF) |
| 46 | 3D printing of resilient, lightweight and conductive MXene/reduced graphene oxide architectures for broadband electromagnetic interference shielding | 9.3 | 104 | Citations (PDF) |
| 47 | Tough, Strong, and Conductive Graphene Fibers by Optimizing Surface Chemistry of Graphene Oxide Precursor | 17.0 | 63 | Citations (PDF) |
| 48 | Super-Tough and Environmentally Stable Aramid. Nanofiber@MXene Coaxial Fibers with Outstanding Electromagnetic Interference Shielding Efficiency | 30.2 | 180 | Citations (PDF) |
| 49 | Superelastic and responsive anisotropic silica nanofiber/polyvinylpyrrolidone/MXene hybrid aerogels for efficient thermal insulation and overheating alarm applications | 8.8 | 35 | Citations (PDF) |
| 50 | Realizing Spontaneously Regular Stacking of Pristine Graphene Oxide by a Chemical-Structure-Engineering Strategy for Mechanically Strong Macroscopic Films | 15.3 | 63 | Citations (PDF) |
| 51 | A Photo-Assisted Reversible Lithium-Sulfur Battery | 18.1 | 95 | Citations (PDF) |
| 52 | Self-supported and hierarchically porous activated carbon nanotube/carbonized wood electrodes for high-performance solid-state supercapacitors | 6.7 | 41 | Citations (PDF) |
| 53 | Efficient Preconstruction of Three-Dimensional Graphene Networks for Thermally Conductive Polymer Composites | 30.2 | 163 | Citations (PDF) |
| 54 | Transparent, conductive and flexible MXene grid/silver nanowire hierarchical films for high-performance electromagnetic interference shielding | 9.3 | 65 | Citations (PDF) |
| 55 | Photothermal healable, stretchable, and conductive MXene composite films for efficient electromagnetic interference shielding | 10.7 | 79 | Citations (PDF) |
| 56 | Super-Hygroscopic Calcium Chloride/Graphene Oxide/Poly(N-isopropylacrylamide) Gels for Spontaneous Harvesting of Atmospheric Water and Solar-Driven Water Release | 8.0 | 74 | Citations (PDF) |
| 57 | Self-Powered Resilient Porous Sensors with Thermoelectric Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) and Carbon Nanotubes for Sensitive Temperature and Pressure Dual-Mode Sensing | 8.0 | 58 | Citations (PDF) |
| 58 | Constructing anisotropic conical graphene aerogels with concentric annular structures for highly thermally conductive phase change composites towards efficient solar–thermal–electric energy conversion | 9.3 | 56 | Citations (PDF) |
| 59 | Integrated temperature and pressure dual-mode sensors based on elastic PDMS foams decorated with thermoelectric PEDOT:PSS and carbon nanotubes for human energy harvesting and electronic-skin | 9.3 | 101 | Citations (PDF) |
| 60 | Controllable Surface-Grafted MXene Inks for Electromagnetic Wave Modulation and Infrared Anti-Counterfeiting Applications | 15.3 | 191 | Citations (PDF) |
| 61 | Antifreezing and stretchable all-gel-state supercapacitor with enhanced capacitances established by graphene/PEDOT-polyvinyl alcohol hydrogel fibers with dual networks | 10.7 | 165 | Citations (PDF) |
| 62 | Constructing tunable core-shell Co5Ge3@Co nanoparticles on reduced graphene oxide by an interfacial bonding promoted Kirkendall effect for high lithium storage performances | 12.0 | 28 | Citations (PDF) |
| 63 | Highly thermally conductive phase change composites with excellent solar-thermal conversion efficiency and satisfactory shape stability on the basis of high-quality graphene-based aerogels | 8.8 | 99 | Citations (PDF) |
| 64 | Cold‐Resistant Nitrogen/Sulfur Dual‐Doped Graphene Fiber Supercapacitors with Solar–Thermal Energy Conversion Effect | 3.4 | 17 | Citations (PDF) |
| 65 | Smart MXene-Based Janus films with multi-responsive actuation capability and high electromagnetic interference shielding performances | 10.7 | 139 | Citations (PDF) |
| 66 | Ultraflexible Reedlike Carbon Nanofiber Membranes Decorated with Ni–Co–S Nanosheets and Fe<sub>2</sub>O<sub>3</sub>–C Core–Shell Nanoneedle Arrays as Electrodes of Flexible Quasi-Solid-State Asymmetric Supercapacitors | 5.4 | 24 | Citations (PDF) |
| 67 | Electrically Conductive Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene/Polypropylene Nanocomposites with an Ultralow Percolation Threshold for Efficient Electromagnetic Interference Shielding | 3.9 | 67 | Citations (PDF) |
| 68 | Kirigami-Inspired Highly Stretchable, Conductive, and Hierarchical Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene Films for Efficient Electromagnetic Interference Shielding and Pressure Sensing | 15.3 | 274 | Citations (PDF) |
| 69 | Superelastic, Ultralight, and Conductive Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i> MXene/Acidified Carbon Nanotube Anisotropic Aerogels for Electromagnetic Interference Shielding | 8.0 | 183 | Citations (PDF) |
| 70 | Coating of Wood with Fe<sub>2</sub>O<sub>3</sub>-Decorated Carbon Nanotubes by One-Step Combustion for Efficient Solar Steam Generation | 8.0 | 127 | Citations (PDF) |
| 71 | Superelastic and ultralight electrospun carbon nanofiber/MXene hybrid aerogels with anisotropic microchannels for pressure sensing and energy storage | 9.9 | 93 | Citations (PDF) |
| 72 | Direct Ink Writing of Highly Conductive MXene Frames for Tunable Electromagnetic Interference Shielding and Electromagnetic Wave-Induced Thermochromism | 30.2 | 151 | Citations (PDF) |
| 73 | Highly anisotropic graphene aerogels fabricated by calcium ion-assisted unidirectional freezing for highly sensitive sensors and efficient cleanup of crude oil spills | 10.7 | 52 | Citations (PDF) |
| 74 | Rational Design of Soft Yet Elastic Lamellar Graphene Aerogels via Bidirectional Freezing for Ultrasensitive Pressure and Bending Sensors | 17.0 | 142 | Citations (PDF) |
| 75 | Nanoscale Polyacrylamide Copolymer/Silica Hydrogel Microspheres with High Compressive Strength and Satisfactory Dispersion Stability for Efficient Profile Control and Plugging | 3.9 | 40 | Citations (PDF) |
| 76 | Mesoporous Yolk‐Shell Structured Organosulfur Nanotubes with Abundant Internal Joints for High‐Performance Lithium–Sulfur Batteries by Kinetics Acceleration | 11.6 | 29 | Citations (PDF) |
| 77 | Multifunctional Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene/Low-Density Polyethylene Soft Robots with Programmable Configuration for Amphibious Motions | 8.0 | 63 | Citations (PDF) |
| 78 | Diffusion-driven fabrication of yolk-shell structured K-birnessite@mesoporous carbon nanospheres with rich oxygen vacancies for high-energy and high-power zinc-ion batteries | 18.1 | 76 | Citations (PDF) |
| 79 | Ultrahigh solar steam generation rate of a vertically aligned reduced graphene oxide foam realized by dynamic compression | 9.3 | 135 | Citations (PDF) |
| 80 | 2D Ferrous Ion‐Crosslinked Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i> MXene Aerogel Evaporators for Efficient Solar Steam Generation | 5.8 | 45 | Citations (PDF) |
| 81 | Wood‐Derived Monolithic Ultrathick Porous Carbon Electrodes Filled with Reduced Graphene Oxide for High‐Performance Supercapacitors with Ultrahigh Areal Capacitances | 2.9 | 15 | Citations (PDF) |
| 82 | Preforming abundant surface cobalt hydroxyl groups on low crystalline flowerlike Co3(Si2O5)2(OH)2 for enhancing catalytic degradation performances with a critical nonradical reaction | 20.5 | 119 | Citations (PDF) |
| 83 | Continuous photocatalytic removal of chromium (VI) with structurally stable and porous Ag/Ag3PO4/reduced graphene oxide microspheres | 12.0 | 47 | Citations (PDF) |
| 84 | Compressible, durable and conductive polydimethylsiloxane-coated MXene foams for high-performance electromagnetic interference shielding | 12.0 | 395 | Citations (PDF) |
| 85 | Synthesis of novel bimetallic nickel cobalt telluride nanotubes on nickel foam for high-performance hybrid supercapacitors | 6.4 | 67 | Citations (PDF) |
| 86 | Electrically conductive aluminum ion-reinforced MXene films for efficient electromagnetic interference shielding | 5.1 | 106 | Citations (PDF) |
| 87 | Multi-responsive nanocomposite membranes of cellulose nanocrystals and poly(N-isopropyl acrylamide) with tunable chiral nematic structures | 12.2 | 54 | Citations (PDF) |
| 88 | BiOBr/Ag6Si2O7 heterojunctions for enhancing visible light catalytic degradation performances with a sequential selectivity enabled by dual synergistic effects | 9.9 | 36 | Citations (PDF) |
| 89 | Constructing mesoporous hollow polysulfane spheres bonded with short-chain sulfurs (Sx, x≤3) as high-performance sulfur cathodes in both ether and ester electrolytes | 18.1 | 46 | Citations (PDF) |
| 90 | Ultrastrong and Highly Conductive MXene‐Based Films for High‐Performance Electromagnetic Interference Shielding | 4.9 | 164 | Citations (PDF) |
| 91 | Elastic and hierarchical carbon nanofiber aerogels and their hybrids with carbon nanotubes and cobalt oxide nanoparticles for high-performance asymmetric supercapacitors | 10.7 | 51 | Citations (PDF) |
| 92 | Highly sensitive, robust and anisotropic MXene aerogels for efficient broadband microwave absorption | 12.8 | 201 | Citations (PDF) |
| 93 | Flexible Poly(vinyl alcohol)–Polyaniline Hydrogel Film with Vertically Aligned Channels for an Integrated and Self-Healable Supercapacitor | 5.4 | 75 | Citations (PDF) |
| 94 | Vertically aligned reduced graphene oxide/Ti3C2Tx MXene hybrid hydrogel for highly efficient solar steam generation | 8.6 | 261 | Citations (PDF) |
| 95 | Freestanding Na<sub>3</sub>V<sub>2</sub>O<sub>2</sub>(PO<sub>4</sub>)<sub>2</sub>F/Graphene Aerogels as High-Performance Cathodes of Sodium-Ion Full Batteries | 8.0 | 52 | Citations (PDF) |
| 96 | Flexible, Transparent, and Conductive Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene–Silver Nanowire Films with Smart Acoustic Sensitivity for High-Performance Electromagnetic Interference Shielding | 15.3 | 402 | Citations (PDF) |
| 97 | Achieving High Lithium Storage Capacity and Long-Term Cyclability of Novel Cobalt Germanate Hydroxide/Reduced Graphene Oxide Anodes with Regulated Electrochemical Catalytic Conversion Process of Hydroxyl Groups | 8.0 | 16 | Citations (PDF) |
| 98 | Photothermal hierarchical carbon nanotube/reduced graphene oxide microspherical aerogels with radially orientated microchannels for efficient cleanup of crude oil spills | 9.9 | 123 | Citations (PDF) |
| 99 | Layered Birnessite Cathode with a Displacement/Intercalation Mechanism for High-Performance Aqueous Zinc-Ion Batteries | 30.2 | 162 | Citations (PDF) |
| 100 | Photothermal graphene/UiO-66-NH2 fabrics for ultrafast catalytic degradation of chemical warfare agent simulants | 12.5 | 81 | Citations (PDF) |
| 101 | Hierarchical Transition Metal Oxide Arrays Grown on Graphene‐Based Fibers with Enhanced Interface by Thin Layer of Carbon toward Solid‐State Asymmetric Supercapacitors | 2.9 | 11 | Citations (PDF) |
| 102 | Flame Synthesis of Superhydrophilic Carbon Nanotubes/Ni Foam Decorated with Fe<sub>2</sub>O<sub>3</sub> Nanoparticles for Water Purification via Solar Steam Generation | 8.0 | 123 | Citations (PDF) |
| 103 | Janus MXene nanosheets for macroscopic assemblies | 6.1 | 65 | Citations (PDF) |
| 104 | 3D Lamellar-Structured Graphene Aerogels for Thermal Interface Composites with High Through-Plane Thermal Conductivity and Fracture Toughness | 30.2 | 229 | Citations (PDF) |
| 105 | Anisotropic CoFe<sub>2</sub>O<sub>4</sub>@Graphene Hybrid Aerogels with High Flux and Excellent Stability as Building Blocks for Rapid Catalytic Degradation of Organic Contaminants in a Flow-Type Setup | 8.0 | 44 | Citations (PDF) |
| 106 | Cobalt Hydroxide Carbonate/Reduced Graphene Oxide Anodes Enabled by a Confined Step-by-Step Electrochemical Catalytic Conversion Process for High Lithium Storage Capacity and Excellent Cyclability with a Low Variance Coefficient | 8.0 | 28 | Citations (PDF) |
| 107 | Flexible, stretchable and electrically conductive MXene/natural rubber nanocomposite films for efficient electromagnetic interference shielding | 8.8 | 294 | Citations (PDF) |
| 108 | Flexible and Multifunctional Silk Textiles with Biomimetic Leaf‐Like MXene/Silver Nanowire Nanostructures for Electromagnetic Interference Shielding, Humidity Monitoring, and Self‐Derived Hydrophobicity | 17.0 | 655 | Citations (PDF) |
| 109 | In Situ Growth of Hierarchical Ni‐Mn‐O Solid Solution on a Flexible and Porous Ni Electrode for High‐Performance All‐Solid‐State Asymmetric Supercapacitors | 3.4 | 17 | Citations (PDF) |
| 110 | Self‐Assembly of MXene‐Surfactants at Liquid–Liquid Interfaces: From Structured Liquids to 3D Aerogels | 1.4 | 15 | Citations (PDF) |
| 111 | Self‐Assembly of MXene‐Surfactants at Liquid–Liquid Interfaces: From Structured Liquids to 3D Aerogels | 14.4 | 223 | Citations (PDF) |
| 112 | Freestanding cellulose paper-derived carbon/Fe/Fe3C with enhanced electrochemical kinetics for high-performance lithium-sulfur batteries | 10.7 | 36 | Citations (PDF) |
| 113 | Hollow-structured MXene-PDMS composites as flexible, wearable and highly bendable sensors with wide working range | 9.9 | 127 | Citations (PDF) |
| 114 | Lightweight Fe@C hollow microspheres with tunable cavity for broadband microwave absorption | 12.8 | 120 | Citations (PDF) |
| 115 | Expanding the Light Harvesting of CsPbI<sub>2</sub>Br to Near Infrared by Integrating with Organic Bulk Heterojunction for Efficient and Stable Solar Cells | 8.0 | 30 | Citations (PDF) |
| 116 | Na2Ti3O7 nanowires with TiO2 and N-doped carbon dual-shells as binder-free electrodes for efficient sodium storage | 5.3 | 14 | Citations (PDF) |
| 117 | Highly sensitive, reliable and flexible piezoresistive pressure sensors featuring polyurethane sponge coated with MXene sheets | 9.9 | 337 | Citations (PDF) |
| 118 | Reduced graphene oxide/carbon nanotube hybrid fibers with narrowly distributed mesopores for flexible supercapacitors with high volumetric capacitances and satisfactory durability | 10.7 | 108 | Citations (PDF) |
| 119 | Silver Phosphate/Graphene Oxide Aerogel Microspheres with Radially Oriented Microchannels for Highly Efficient and Continuous Removal of Pollutants from Wastewaters | 6.9 | 34 | Citations (PDF) |
| 120 | Nanolayered Cobalt@Carbon Hybrids Derived from Metal–Organic Frameworks for Microwave Absorption | 5.3 | 125 | Citations (PDF) |
| 121 | Fabrication of carboxymethyl cellulose and graphene oxide bio-nanocomposites for flexible nonvolatile resistive switching memory devices | 12.2 | 73 | Citations (PDF) |
| 122 | Effects of Graphene Quality on Lithium Storage Performances of Fe<sub>3</sub>O<sub>4</sub>/Thermally Reduced Graphene Oxide Hybrid Anodes | 2.9 | 15 | Citations (PDF) |
| 123 | Controllable synthesis of hollow microspheres with Fe@Carbon dual-shells for broad bandwidth microwave absorption | 10.7 | 164 | Citations (PDF) |
| 124 | Multifunctional and Water‐Resistant MXene‐Decorated Polyester Textiles with Outstanding Electromagnetic Interference Shielding and Joule Heating Performances | 17.0 | 729 | Citations (PDF) |
| 125 | A High‐Performance Dual‐Ion Battery Enabled by Conversion‐Type Manganese Silicate Anodes with Enhanced Ion Accessibility | 2.9 | 13 | Citations (PDF) |
| 126 | High-quality graphene aerogels for thermally conductive phase change composites with excellent shape stability | 9.3 | 167 | Citations (PDF) |
| 127 | Robust binder-free anodes assembled with ultralong mischcrystal TiO2 nanowires and reduced graphene oxide for high-rate and long cycle life lithium-ion storage | 7.9 | 12 | Citations (PDF) |
| 128 | Porous Graphene Films with Unprecedented Elastomeric Scaffold‐Like Folding Behavior for Foldable Energy Storage Devices | 24.5 | 111 | Citations (PDF) |
| 129 | Simultaneous enhancements in electrical conductivity and toughness of selectively foamed polycarbonate/polystyrene/carbon nanotube microcellular foams | 12.8 | 59 | Citations (PDF) |
| 130 | Superelastic and multifunctional graphene-based aerogels by interfacial reinforcement with graphitized carbon at high temperatures | 10.7 | 153 | Citations (PDF) |
| 131 | Rapidly Responsive and Flexible Chiral Nematic Cellulose Nanocrystal Composites as Multifunctional Rewritable Photonic Papers with Eco-Friendly Inks | 8.0 | 135 | Citations (PDF) |
| 132 | Graphene-based Janus film with improved sensitive response capacity for smart actuators | 7.7 | 28 | Citations (PDF) |
| 133 | Vertically Aligned High-Quality Graphene Foams for Anisotropically Conductive Polymer Composites with Ultrahigh Through-Plane Thermal Conductivities | 8.0 | 235 | Citations (PDF) |
| 134 | Highly anisotropic graphene/boron nitride hybrid aerogels with long-range ordered architecture and moderate density for highly thermally conductive composites | 10.7 | 226 | Citations (PDF) |
| 135 | Multifunctional, Superelastic, and Lightweight MXene/Polyimide Aerogels | 11.6 | 557 | Citations (PDF) |
| 136 | Thermally Conductive Phase Change Composites Featuring Anisotropic Graphene Aerogels for Real‐Time and Fast‐Charging Solar‐Thermal Energy Conversion | 17.0 | 351 | Citations (PDF) |
| 137 | Highly Electrically Conductive Three-Dimensional Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene/Reduced Graphene Oxide Hybrid Aerogels with Excellent Electromagnetic Interference Shielding Performances | 15.3 | 860 | Citations (PDF) |
| 138 | Dual‐Carbon‐Confined Fe<sub>7</sub>S<sub>8</sub> Anodes with Enhanced Electrochemical Catalytic Conversion Process for Ultralong Lithium Storage | 3.4 | 40 | Citations (PDF) |
| 139 | Vertically aligned, ultralight and highly compressive all-graphitized graphene aerogels for highly thermally conductive polymer composites | 10.7 | 184 | Citations (PDF) |
| 140 | Enhanced lithium storage performances of novel layered nickel germanate anodes inspired by the spatial arrangement of lotus leaves | 5.0 | 13 | Citations (PDF) |
| 141 | AFM nanomechanical mapping and nanothermal analysis reveal enhanced crystallization at the surface of a semicrystalline polymer | 4.2 | 33 | Citations (PDF) |
| 142 | Sb Nanoparticles Embedded in a Nitrogen‐Doped Carbon Matrix with Tuned Voids and Interfacial Bonds for High‐Rate Lithium Storage | 2.9 | 18 | Citations (PDF) |
| 143 | Efficient Photocatalytic Reduction Approach for Synthesizing Chemically Bonded N-Doped TiO<sub>2</sub>/Reduced Graphene Oxide Hybrid as a Freestanding Electrode for High-Performance Lithium Storage | 5.4 | 12 | Citations (PDF) |
| 144 | One-Step Self-Assembly for Fabricating Asymmetric Particle Arrays and Templates for Bifunctional Systems | 5.3 | 3 | Citations (PDF) |
| 145 | Neuron-Inspired Fe<sub>3</sub>O<sub>4</sub>/Conductive Carbon Filament Network for High-Speed and Stable Lithium Storage | 8.0 | 40 | Citations (PDF) |
| 146 | α-Fe<sub>2</sub>O<sub>3</sub> Nanodisk/Bacterial Cellulose Hybrid Membranes as High-Performance Sulfate-Radical-Based Visible Light Photocatalysts under Stirring/Flowing States | 8.0 | 67 | Citations (PDF) |
| 147 | Silver Silicate@Carbon Nanotube Nanocomposites for Enhanced Visible Light Photodegradation Performance | 6.9 | 32 | Citations (PDF) |
| 148 | Simultaneous Enhancements in Toughness and Electrical Conductivity of Polypropylene/Carbon Nanotube Nanocomposites by Incorporation of Electrically Inert Calcium Carbonate Nanoparticles | 3.9 | 35 | Citations (PDF) |
| 149 | Highly Efficient High-Pressure Homogenization Approach for Scalable Production of High-Quality Graphene Sheets and Sandwich-Structured α-Fe<sub>2</sub>O<sub>3</sub>/Graphene Hybrids for High-Performance Lithium-Ion Batteries | 8.0 | 84 | Citations (PDF) |
| 150 | A flexible transparent colorimetric wrist strap sensor | 5.0 | 115 | Citations (PDF) |
| 151 | Hierarchical Porous Graphene/Ni Foam Composite with High Performances in Energy Storage Prepared by Flame Reduction of Graphene Oxide | 2.9 | 15 | Citations (PDF) |
| 152 | Graphene Oxide/Chitosan Aerogel Microspheres with Honeycomb-Cobweb and Radially Oriented Microchannel Structures for Broad-Spectrum and Rapid Adsorption of Water Contaminants | 8.0 | 313 | Citations (PDF) |
| 153 | Polylactic Acid Nanofiber Scaffold Decorated with Chitosan Islandlike Topography for Bone Tissue Engineering | 8.0 | 163 | Citations (PDF) |
| 154 | One-Pot Sintering Strategy for Efficient Fabrication of High-Performance and Multifunctional Graphene Foams | 8.0 | 44 | Citations (PDF) |
| 155 | Graphene-coated ZnO tetrapod whiskers for thermally and electrically conductive epoxy composites | 8.2 | 55 | Citations (PDF) |
| 156 | Highly Conductive Transition Metal Carbide/Carbonitride(MXene)@polystyrene Nanocomposites Fabricated by Electrostatic Assembly for Highly Efficient Electromagnetic Interference Shielding | 17.0 | 768 | Citations (PDF) |
| 157 | Phenolic resin-enhanced three-dimensional graphene aerogels and their epoxy nanocomposites with high mechanical and electromagnetic interference shielding performances | 8.8 | 128 | Citations (PDF) |
| 158 | Tetrahedral Silver Phosphate/Graphene Oxide Hybrids as Highly Efficient Visible Light Photocatalysts with Excellent Cyclic Stability | 3.1 | 33 | Citations (PDF) |
| 159 | One-pot synthesis of bismuth silicate heterostructures with tunable morphology and excellent visible light photodegradation performances | 9.9 | 26 | Citations (PDF) |
| 160 | Fiber-reinforced three-dimensional graphene aerogels for electrically conductive epoxy composites with enhanced mechanical properties | 3.4 | 19 | Citations (PDF) |
| 161 | Hydrophobic, Flexible, and Lightweight MXene Foams for High‐Performance Electromagnetic‐Interference Shielding | 24.5 | 1,679 | Citations (PDF) |
| 162 | Magnetic, electrically conductive and lightweight graphene/iron pentacarbonyl porous films enhanced with chitosan for highly efficient broadband electromagnetic interference shielding | 8.8 | 68 | Citations (PDF) |
| 163 | High Lithium Storage Capacity and Long Cycling Life Fe<sub>3</sub>S<sub>4</sub> Anodes with Reversible Solid Electrolyte Interface Films and Sandwiched Reduced Graphene Oxide Shells | 8.0 | 43 | Citations (PDF) |
| 164 | Fabrication of PAN@TiO 2 /Ag nanofibrous membrane with high visible light response and satisfactory recyclability for dye photocatalytic degradation | 6.7 | 89 | Citations (PDF) |
| 165 | Influence of Polymer-Clay Interfacial Interactions on the Ignition Time of Polymer/Clay Nanocomposites | 2.9 | 10 | Citations (PDF) |
| 166 | High‐Performance Epoxy Nanocomposites Reinforced with Three‐Dimensional Carbon Nanotube Sponge for Electromagnetic Interference Shielding | 17.0 | 688 | Citations (PDF) |
| 167 | Influence of metal ions on thermo-oxidative stability and combustion response of polyamide 6/clay nanocomposites | 4.2 | 32 | Citations (PDF) |
| 168 | In situ reduction of iron oxide with graphene for convenient synthesis of various graphene hybrids | 10.7 | 16 | Citations (PDF) |
| 169 | Hollow Manganese Silicate Nanotubes with Tunable Secondary Nanostructures as Excellent Fenton‐Type Catalysts for Dye Decomposition at Ambient Temperature | 17.0 | 138 | Citations (PDF) |
| 170 | Fabrication of a compressible PU@RGO@MnO<sub>2</sub> hybrid sponge for efficient removal of methylene blue with an excellent recyclability | 4.4 | 18 | Citations (PDF) |
| 171 | Thermally Annealed Anisotropic Graphene Aerogels and Their Electrically Conductive Epoxy Composites with Excellent Electromagnetic Interference Shielding Efficiencies | 8.0 | 306 | Citations (PDF) |
| 172 | Decoration of defect-free graphene nanoplatelets with alumina for thermally conductive and electrically insulating epoxy composites | 8.8 | 127 | Citations (PDF) |
| 173 | Air-dried, high-density graphene hybrid aerogels for phase change composites with exceptional thermal conductivity and shape stability | 9.3 | 202 | Citations (PDF) |
| 174 | K<sub>2</sub>Mn<sub>4</sub>O<sub>8</sub>/Reduced Graphene Oxide Nanocomposites for Excellent Lithium Storage and Adsorption of Lead Ions | 3.4 | 19 | Citations (PDF) |
| 175 | Enhanced thermal conductivity and satisfactory flame retardancy of epoxy/alumina composites by combination with graphene nanoplatelets and magnesium hydroxide | 12.8 | 146 | Citations (PDF) |
| 176 | Highly compressible anisotropic graphene aerogels fabricated by directional freezing for efficient absorption of organic liquids | 10.7 | 276 | Citations (PDF) |
| 177 | Supercritical carbon dioxide fluid assisted synthesis of hierarchical AlOOH@reduced graphene oxide hybrids for efficient removal of fluoride ions | 12.0 | 49 | Citations (PDF) |
| 178 | Direct Reduction of Graphene Oxide by Ni Foam as a High-Capacitance Supercapacitor Electrode | 8.0 | 82 | Citations (PDF) |
| 179 | Cellulose/graphene aerogel supported phase change composites with high thermal conductivity and good shape stability for thermal energy storage | 10.7 | 439 | Citations (PDF) |
| 180 | γ-Aminopropyl triethoxysilane functionalized graphene oxide for composites with high dielectric constant and low dielectric loss | 8.2 | 98 | Citations (PDF) |
| 181 | Core–shell structured MgO@mesoporous silica spheres for enhanced adsorption of methylene blue and lead ions | 4.4 | 35 | Citations (PDF) |
| 182 | FeCl<sub>3</sub>intercalated few-layer graphene for high lithium-ion storage performance | 9.3 | 43 | Citations (PDF) |
| 183 | Carbon nanotube@layered nickel silicate coaxial nanocables as excellent anode materials for lithium and sodium storage | 9.3 | 67 | Citations (PDF) |
| 184 | Electrospun polyacrylonitrile nanofibers loaded with silver nanoparticles by silver mirror reaction | 5.8 | 61 | Citations (PDF) |
| 185 | Growth of nickel silicate nanoplates on reduced graphene oxide as layered nanocomposites for highly reversible lithium storage | 5.0 | 53 | Citations (PDF) |
| 186 | Magnetic and electrically conductive epoxy/graphene/carbonyl iron nanocomposites for efficient electromagnetic interference shielding | 8.8 | 118 | Citations (PDF) |
| 187 | Enhanced electromagnetic interference shielding efficiency of polystyrene/graphene composites with magnetic Fe3O4 nanoparticles | 10.7 | 326 | Citations (PDF) |
| 188 | Electrically conductive polycarbonate/carbon nanotube composites toughened with micron-scale voids | 10.7 | 65 | Citations (PDF) |
| 189 | Improved rheological and electrical properties of graphene/polystyrene nanocomposites modified with styrene maleic anhydride copolymer | 8.8 | 24 | Citations (PDF) |
| 190 | Electrically conductive and super-tough polypropylene/carbon nanotube nanocomposites prepared by melt compounding | 12.8 | 57 | Citations (PDF) |
| 191 | Revisit to the self-assembled hybrid acrylate/silica core-shell structured particles in the presence of unmodified silica particles | 5.2 | 7 | Citations (PDF) |
| 192 | In situ chemical reduction and functionalization of graphene oxide for electrically conductive phenol formaldehyde composites | 10.7 | 98 | Citations (PDF) |
| 193 | Thermally conductive and electrically insulating epoxy nanocomposites with silica-coated graphene | 4.4 | 99 | Citations (PDF) |
| 194 | Defect-controlled synthesis of graphene based nano-size electronic devices using in situ thermal treatment | 2.6 | 7 | Citations (PDF) |
| 195 | Folding and birefringence behavior of poly(vinyl alcohol) hydrogel film induced by freezing and thawing | 4.4 | 6 | Citations (PDF) |
| 196 | The Effect of Surface Chemistry of Graphene on Cellular Structures and Electrical Properties of Polycarbonate Nanocomposite Foams | 3.9 | 36 | Citations (PDF) |
| 197 | Electrically conductive rubbery epoxy/diamine-functionalized graphene nanocomposites with improved mechanical properties | 12.8 | 79 | Citations (PDF) |
| 198 | Sandwichlike Magnesium Silicate/Reduced Graphene Oxide Nanocomposite for Enhanced Pb<sup>2+</sup> and Methylene Blue Adsorption | 8.0 | 218 | Citations (PDF) |
| 199 | Simultaneous functionalization and reduction of graphene oxide with polyetheramine and its electrically conductive epoxy nanocomposites | 3.4 | 29 | Citations (PDF) |
| 200 | Thermally conductive phenol formaldehyde composites filled with carbon fillers | 2.5 | 35 | Citations (PDF) |
| 201 | Simultaneous Improvement in Both Electrical Conductivity and Toughness of Polyamide 6 Nanocomposites Filled with Elastomer and Carbon Black Particles | 3.9 | 37 | Citations (PDF) |
| 202 | Three dimensional graphene aerogels and their electrically conductive composites | 10.7 | 242 | Citations (PDF) |
| 203 | Enhanced mechanical properties of poly(vinyl alcohol) nanocomposites with glucose-reduced graphene oxide | 2.5 | 24 | Citations (PDF) |
| 204 | Synergistic effect of boron nitride flakes and tetrapod-shaped ZnO whiskers on the thermal conductivity of electrically insulating phenol formaldehyde composites | 8.2 | 101 | Citations (PDF) |
| 205 | Effect of compounding sequence on localization of carbon nanotubes and electrical properties of ternary nanocomposites | 8.2 | 32 | Citations (PDF) |
| 206 | Structural evolution of functionalized graphene sheets during solvothermal reduction | 10.7 | 47 | Citations (PDF) |
| 207 | Ionic-liquid-assisted facile synthesis of silver nanoparticle-reduced graphene oxide hybrids by gamma irradiation | 10.7 | 117 | Citations (PDF) |
| 208 | Synthesis of graphene decorated with silver nanoparticles by simultaneous reduction of graphene oxide and silver ions with glucose | 10.7 | 113 | Citations (PDF) |
| 209 | Recent developments in the fire retardancy of polymeric materials | 25.2 | 637 | Citations (PDF) |
| 210 | Synergy Derived by Combining Graphene and Carbon Nanotubes as Nanofillers in Composites | 0.6 | 10 | Citations (PDF) |
| 211 | Functionalization and Reduction of Graphene Oxide with <i>p</i>-Phenylene Diamine for Electrically Conductive and Thermally Stable Polystyrene Composites | 8.0 | 209 | Citations (PDF) |
| 212 | A General Strategy for the Synthesis of Carbon Nanofibers from Solid Carbon Materials | 1.4 | 4 | Citations (PDF) |
| 213 | A General Strategy for the Synthesis of Carbon Nanofibers from Solid Carbon Materials | 14.4 | 18 | Citations (PDF) |
| 214 | Chemical and thermal reduction of graphene oxide and its electrically conductive polylactic acid nanocomposites | 8.8 | 168 | Citations (PDF) |
| 215 | The reinforcing effect of graphene nanosheets on the cryogenic mechanical properties of epoxy resins | 8.8 | 159 | Citations (PDF) |
| 216 | Tough and highly stretchable graphene oxide/polyacrylamide nanocomposite hydrogels | 7.3 | 474 | Citations (PDF) |
| 217 | The effect of surface chemistry of graphene on rheological and electrical properties of polymethylmethacrylate composites | 10.7 | 321 | Citations (PDF) |
| 218 | Improved Electrical Conductivity of Polyamide 12/Graphene Nanocomposites with Maleated Polyethylene-Octene Rubber Prepared by Melt Compounding | 8.0 | 109 | Citations (PDF) |
| 219 | Facile synthesis of well-dispersed graphene by γ-ray induced reduction of graphene oxide | 7.3 | 242 | Citations (PDF) |
| 220 | Flame retardancy of polyamide 66 nanocomposites with thermally stable organoclay | 3.3 | 17 | Citations (PDF) |
| 221 | Chemical reduction and removal of Cr(vi) from acidic aqueous solution by ethylenediamine-reduced graphene oxide | 7.3 | 297 | Citations (PDF) |
| 222 | Suppression of wear in graphene polymer composites | 10.7 | 237 | Citations (PDF) |
| 223 | The effect of graphite oxide on the thermoelectric properties of polyaniline | 10.7 | 219 | Citations (PDF) |
| 224 | In situ thermal reduction of graphene oxide for high electrical conductivity and low percolation threshold in polyamide 6 nanocomposites | 8.8 | 146 | Citations (PDF) |
| 225 | Cr(VI) removal from aqueous solution using chemically reduced and functionalized graphene oxide | 3.5 | 55 | Citations (PDF) |
| 226 | Viscoelastic Properties of Graphene-Polymer Composites | 0.2 | 15 | Citations (PDF) |
| 227 | Wetting Behavior of Graphene-Chitosan Nanocomposites for 3D Scaffold Structures | 0.2 | 4 | Citations (PDF) |
| 228 | Raman study of interfacial load transfer in graphene nanocomposites | 3.0 | 76 | Citations (PDF) |
| 229 | Graphene Colloidal Suspensions as High Performance Semi-Synthetic Metal-Working Fluids | 3.1 | 74 | Citations (PDF) |
| 230 | Vacuum-assisted synthesis of graphene from thermal exfoliation and reduction of graphite oxide | 7.3 | 203 | Citations (PDF) |
| 231 | Tough Graphene−Polymer Microcellular Foams for Electromagnetic Interference Shielding | 8.0 | 1,076 | Citations (PDF) |
| 232 | Enhanced Electrical Conductivity in Polystyrene Nanocomposites at Ultra-Low Graphene Content | 8.0 | 258 | Citations (PDF) |
| 233 | Enhanced Thermal Conductivity in a Nanostructured Phase Change Composite due to Low Concentration Graphene Additives | 3.1 | 416 | Citations (PDF) |
| 234 | Growth of silver nanocrystals on graphene by simultaneous reduction of graphene oxide and silver ions with a rapid and efficient one-step approach | 3.4 | 213 | Citations (PDF) |
| 235 | Electrical and dielectric properties of polypropylene nanocomposites based on carbon nanotubes and barium titanate nanoparticles | 8.8 | 79 | Citations (PDF) |
| 236 | Dispersion of graphene oxide and its flame retardancy effect on epoxy nanocomposites | 3.4 | 47 | Citations (PDF) |
| 237 | Enhanced thermal stability in graphene oxide covalently functionalized with 2-amino-4,6-didodecylamino-1,3,5-triazine | 10.7 | 218 | Citations (PDF) |
| 238 | Simultaneous surface functionalization and reduction of graphene oxide with octadecylamine for electrically conductive polystyrene composites | 10.7 | 387 | Citations (PDF) |
| 239 | Critical particle size for interfacial debonding in polymer/nanoparticle composites | 8.8 | 61 | Citations (PDF) |
| 240 | Superhydrophobic to Superhydrophilic Wetting Control in Graphene Films | 24.5 | 370 | Citations (PDF) |
| 241 | Fire response of polyamide 6 with layered and fibrillar nanofillers | 7.1 | 25 | Citations (PDF) |
| 242 | Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding | 4.2 | 776 | Citations (PDF) |
| 243 | Impact fracture behaviour of nylon 6-based ternary nanocomposites | 12.8 | 45 | Citations (PDF) |
| 244 | Effects of loading rate and temperature on tensile yielding and deformation mechanisms of nylon 6-based nanocomposites | 8.8 | 10 | Citations (PDF) |
| 245 | Fracture and Fatigue in Graphene Nanocomposites | 11.6 | 871 | Citations (PDF) |
| 246 | Polypropylene/Graphene Oxide Nanocomposites Prepared by In Situ Ziegler−Natta Polymerization | 6.7 | 270 | Citations (PDF) |
| 247 | Toughening Polypropylene and Its Nanocomposites with Submicrometer Voids | 5.0 | 79 | Citations (PDF) |
| 248 | Morphological distribution of polymeric nucleating agents in injection‐molded isotactic polypropylene plates and its influence on nucleating efficiency | 2.7 | 25 | Citations (PDF) |
| 249 | Evaluation of Methods for Stiffness Predictions of Polymer/Clay Nanocomposites | 2.6 | 14 | Citations (PDF) |
| 250 | Synergistic effect of decabromodiphenyl ethane and montmorillonite on flame retardancy of polypropylene | 7.1 | 69 | Citations (PDF) |
| 251 | Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites | 25.0 | 256 | Citations (PDF) |
| 252 | Roles of graphite oxide, clay and POSS during the combustion of polyamide 6 | 4.2 | 122 | Citations (PDF) |
| 253 | Electrically conductive and super-tough polyamide-based nanocomposites | 4.2 | 110 | Citations (PDF) |
| 254 | Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content | 15.3 | 2,685 | Citations (PDF) |
| 255 | Sol–gel template synthesis and characterization of magnetoelectric CoFe2O4/Pb(Zr0.52Ti0.48)O3 nanotubes | 4.5 | 34 | Citations (PDF) |
| 256 | A third kind growth model of tetrapod: Rod-based single crystal ZnO tetrapod nanostructure | 4.5 | 10 | Citations (PDF) |
| 257 | New Method To Prepare Graphite Nanocomposites | 6.7 | 128 | Citations (PDF) |
| 258 | Orientation and the extent of exfoliation of clay on scratch damage in polyamide 6 nanocomposites | 2.7 | 22 | Citations (PDF) |
| 259 | Zinc nanoplates synthesized by a micro-jet under electron-beam irradiation | 2.7 | 15 | Citations (PDF) |
| 260 | Multiform structures of SnO2 nanobelts | 2.7 | 32 | Citations (PDF) |
| 261 | Transcrystalline Regions in the Vicinity of Nanofillers in Polyamide-6 | 5.0 | 79 | Citations (PDF) |
| 262 | Flame retardancy of highly filled polyamide 6/clay nanocomposites | 2.7 | 65 | Citations (PDF) |
| 263 | Microstructure and properties of highly filled rubber/clay nanocomposites prepared by melt blending | 8.8 | 69 | Citations (PDF) |
| 264 | Nanoscratching of nylon 66-based ternary nanocomposites | 8.7 | 51 | Citations (PDF) |
| 265 | Improved mechanical and functional properties of elastomer/graphite nanocomposites prepared by latex compounding | 8.7 | 143 | Citations (PDF) |
| 266 | Intercalated structure of polypropylene/in situ polymerization-modified talc composites via melt compounding | 4.2 | 28 | Citations (PDF) |
| 267 | Preparation and crystalline morphology of biodegradable starch/clay nanocomposites | 4.2 | 114 | Citations (PDF) |
| 268 | Synergistic effect of SEBS-g-MA and epoxy on toughening of polyamide 6/glass fiber composites | 2.7 | 18 | Citations (PDF) |
| 269 | Fracture toughness of nylon 6/organoclay/elastomer nanocomposites | 8.8 | 74 | Citations (PDF) |
| 270 | Facile Synthesis and Assembly of Cu2S Nanodisks to Corncoblike Nanostructures | 6.7 | 72 | Citations (PDF) |
| 271 | Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites | 8.8 | 105 | Citations (PDF) |
| 272 | Preparation of Exfoliated Zirconium Phosphate/Nafion Organic-Inorganic Hybrid Proton Exchange Membranes | 2.3 | 24 | Citations (PDF) |
| 273 | Clay exfoliation and organic modification on wear of nylon 6 nanocomposites processed by different routes | 8.8 | 130 | Citations (PDF) |
| 274 | A New Strategy to Exfoliate Silicone Rubber/Clay Nanocomposites | 4.1 | 66 | Citations (PDF) |
| 275 | Effect of blending sequence on microstructure of ternary nanocomposites | 4.2 | 156 | Citations (PDF) |
| 276 | Water-assisted melt compounding of nylon-6/pristine montmorillonite nanocomposites | 2.7 | 82 | Citations (PDF) |
| 277 | In-situ combustion synthesis of ultrafine TiB<sub>2</sub>particles reinforced Cu matrix composite | 3.5 | 25 | Citations (PDF) |
| 278 | Mechanical and dynamic mechanical properties of nylon 66/montmorillonite nanocomposites fabricated by melt compounding | 3.4 | 89 | Citations (PDF) |
| 279 | Toughening of recycled poly(ethylene terephthalate) with a maleic anhydride grafted SEBS triblock copolymer | 2.7 | 66 | Citations (PDF) |
| 280 | On Toughness and Stiffness of Poly(butylene terephthalate) with Epoxide-Containing Elastomer by Reactive Extrusion | 4.1 | 28 | Citations (PDF) |
| 281 | Crystallization and impact energy of polypropylene/CaCO3 nanocomposites with nonionic modifier | 4.2 | 299 | Citations (PDF) |
| 282 | Rheological and mechanical properties of PVC/CaCO3 nanocomposites prepared by in situ polymerization | 4.2 | 348 | Citations (PDF) |
| 283 | Enhanced Interfacial Adhesion between PPO and Glass Beads in Composites by Surface Modification of Glass Beads via In Situ Polymerization and Copolymerization | 6.7 | 50 | Citations (PDF) |
| 284 | A Novel Method for Preparation of Disorderly Exfoliated Epoxy/Clay Nanocomposite | 6.7 | 92 | Citations (PDF) |
| 285 | Toughening of polyethylene terephthalate/amorphous copolyester blends with a maleated thermoplastic elastomer | 2.7 | 17 | Citations (PDF) |
| 286 | A new approach to polymer/montmorillonite nanocomposites | 4.2 | 208 | Citations (PDF) |
| 287 | Dispersion and distribution of organically modified montmorillonite in nylon-66 matrix | 2.7 | 76 | Citations (PDF) |
| 288 | Multiple melting and crystallization of nylon-66/montmorillonite nanocomposites | 2.7 | 71 | Citations (PDF) |
| 289 | Conductive mechanism of polymer/graphite conducting composites with low percolation threshold | 2.7 | 129 | Citations (PDF) |
| 290 | On compatibilization and toughening of a copolyester with a maleated thermoplastic elastomer | 4.2 | 45 | Citations (PDF) |
| 291 | Impact fracture morphology of nylon 6 toughened with a maleated polyethylene-octene elastomer | 2.7 | 63 | Citations (PDF) |
| 292 | A new process of fabricating electrically conducting nylon 6/graphite nanocomposites via intercalation polymerization | 2.7 | 285 | Citations (PDF) |
| 293 | Toughening of a copolyester with a maleated core-shell toughener | 2.7 | 19 | Citations (PDF) |
| 294 | Title is missing! | 1.0 | 14 | Citations (PDF) |
| 295 | Nonisothermal crystallization kinetics ofin situ polyamide-6 blended with poly(phenylene oxide) | 2.7 | 6 | Citations (PDF) |
| 296 | Toughening and reinforcing polypropylene with core-shell structured fillers | 2.7 | 53 | Citations (PDF) |
| 297 | The role of interfacial modifier in toughening of nylon 6 with a core-shell toughener | 2.7 | 33 | Citations (PDF) |
| 298 | A new conception on the toughness of nylon 6/silica nanocomposite prepared viain situ polymerization | 2.7 | 275 | Citations (PDF) |
| 299 | Toughening of nylon 6 with a maleated core-shell impact modifier | 2.7 | 85 | Citations (PDF) |
| 300 | Influence of interfacial adhesion on toughening of polyethylene-octene elastomer/nylon 6 blends | 2.7 | 118 | Citations (PDF) |
| 301 | Effects of alkylation of silicas on interfacial interaction and molecular motions between silicas and rubbers | 2.7 | 59 | Citations (PDF) |
| 302 | Effects of interfacial adhesion on microdamage and rheological behaviour of glass bead filled nylon 6 | 3.4 | 37 | Citations (PDF) |
| 303 | Effects of Alkylation of Silica Filler on Rubber Reinforcement | 1.2 | 78 | Citations (PDF) |
| 304 | Antifreezing, Antidrying, and Conductive Hydrogels for Electronic Skin Applications at Ultralow Temperatures | 8.0 | 8 | Citations (PDF) |
